byuu says:
Changelog:
- SPC7110 data port emulation greatly improved
- SPC7110 $480b.d1 emulated (but $4805-4806 does not work right for mode
2 decompression yet)
- MSU1 audio output will be muted when the S-DSP FLG ($6c).d6 (mute)
flag is set
- MSU1 will read filenames from manifest now (defaults to msu1.rom and
track-#.pcm if missing ... for now)
- bugfixes with MSU1 load state and track seek (and $4804 was wrapping
into $4805 to change the track#)
- Link coprocessor removed (it was meant for ST018 HLE, which never
happened)
Notes for things I forgot but need to address:
- $4813 needs to be uint7 for the set_data_offset() to not allow reading
A23 as set ever (or we can mask)
- AbsoluteInput when window doesn't have focus should return -32768, not
0
- need to support input ID lists that aren't linear (0-7), but arbitrary
(0,1,6,7 or whatever)
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
byuu says:
Not even purify makes compatible images for this WIP.
Unless you want to figure it out yourself, I'd suggest waiting for an
updated tool before using subsequent WIPs.
Changelog:
- MSU1 initializes data port + audio track to 0
- MSU1 implements audio track error flag on $2000.d3
- manifest.xml now controls file names for cartridge folders ... mostly
Regressions:
- Super Game Boy support is broken
- Sufami Turbo support is broken
So, basically Emulator::Interface() now has:
void load(const string &manifest);
void save();
The first one will analyze the manifest, and call all the ROM + RAM
loadRequest() commands necessary to run the game.
The second one will call saveRequest() commands on all writable and
non-volatile storage (basically if it's a RAM type and has a filename
specified, it gets saved to disk.)
save() shrinks the size of Emulator::Interface() by hiding information
one is unlikely to care about. It also makes it much easier to save.
The core auto-calls this when you unload a game as well. So the only
time you ever have to worry about it is if you want to save RAM files
mid-game (in case you want to do periodic backups in case of a crash.)
[Yes, the release number is re-used. -Ed.]
byuu says:
I had some bugs in r07 that I couldn't track down, DKJM2's clock was
getting all out of sync.
So I just reverted to r05, blew away both RTCs entirely, and wrote them
cleanly from scratch (obviously looking off the old code.) A bit
extreme, but it worked.
I believe I found the error in the process, day and month were resetting
the counter to 0 instead of 1, it wasn't handling leap year, etc.
While I was at it, I fixed the day-of-week calculation. The SharpRTC
epoch is actually 1000-01-01, and not 1900-01-01.
I'm sure you guys will be really happy that if it ever becomes 1000AD
again and you're playing a ROM hack that uses the SharpRTC and relies on
its weekday value that it will show the correct day now ...
Kind of a pain to compute, but nothing compared to the seventh circle of
hell that was my IBM dBase III Julian<>Gregorian conversion functions :/
Also found a few bugs in the Epson code this way. And I moved the round
seconds actions and flag clear to +125us after flag set.
So, if you had the old r06 or r07, please delete those.
Unfortunately, this took all of my energy today, so the file names
inside manifest changes will have to be in the next WIP.
EDIT: ran a diff against old r07 and new r06.
- added if(days == 31) case twice in EpsonRTC::tick_day()
- forgot weekday = 0; in SharpRTC::load()
- need to move the cartridge+cheat objects up in sfc/Makefile again
- System::init() needs assert(interface != nullptr /* not 0 */)
byuu says:
Changelog:
- EpsonRTC emulation improved further (stop/pause blocks IRQs, verified
secondhi >= 3 triggers 30-second adjust (even on invalid BCD),
second-changed flag is mirrored to minute+hour+day+month+weekday,
improved busy timing, etc.)
- SharpRTC rewritten, works like EpsonRTC now in that it has its own
timing thread and ticks with the emulation
- won't attempt to read from an unopen file stream now (I think this is
what was crashing Sufami Turbo without SRAM?)
- added Tools -> Synchronize Time option below load/save state options.
Only appears when you play a game with an emulated RTC chip
Just realized that I used 125ms for the 30-second adjust instead of
125us, so I'll fix that in the next WIP.
Aside from that, this is as good as the emulation is going to get.
There's still a couple of absolutely psychopathic edge cases that are
just too damn difficult to simulate.
So that leaves us with data port control + decompression status
registers to investigate before SPC7110 will be finished.
byuu says:
Changelog:
- renamed SRTC -> SharpRTC
- renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema)
- full emulation of invalid BCD values for EpsonRTC
- fixed EpsonRTC IRQ mask
Remaining SPC7110 tasks:
- RTC: test 30-second adjust with all values from 00-7f
- RTC: hold is supposed to tick the clock one second after being
released?
- RTC: wait times are too long (need to use >32KHz oscillation to
simulate it properly)
- Data Port: test $4818 more thoroughly (not too important)
- Decompression: test $480c more thoroughly (very important)
- Decompression: perform some tests on DMA transferring data, especially
with $4807 set
Write-offs, at least for now:
- Decompression: emulation of the crash/glitch behavior seen on the real
chip when fed invalid data
- Decompression: I can find no use of $4808
- ALU: Booth cycles for MUL/DIV (this could actually be rather important
if the game reads simpler values quickly [some shoddy games did this
with the CPU ALU])
- RTC: delay after hold release for $4841 accesses
- RTC: 125uS delay after 30-second adjust that will screw with registers
in odd ways if your read or write too soon
- RTC: psychotic behavior of reading too early returning port address
- 1
byuu says:
I split the RTC-4513 code from the SPC7110 code (and obviously in the
XML mapping as well), since they are separate chips on the FEoEZ PCB.
In this way, you can use just the RTC-4513 in homebrew now if you want.
It's a bit nicer than the Sharp RTC from Dai Kaijuu Monogatari II.
This was needed anyway, it has an internal oscillator that's not
divisible by the SNES clock used by the SPC7110; and both the RTC and
decompression code need to be running their own threads anyway.
In the process, I rewrote the way variables are stored to use named
integers rather than a block of memory. Makes the code a lot easier on
the eyes, and more importantly, will make emulating bad BCD values
a whole lot easier.
byuu says:
Changelog: (SPC7110)
- emulated $480b.d0 + $4807 deinterleave mode
- cleaned up decompression core (I'd still like to wipe out those static
variables, those are bad for save states.)
- improved emulation of data port ($481a only increments, never reads)
- improved emulation of RTC (block appropriate bits in the hour register
based on 12/24h mode select; $4840 modes != 1 all disable the chip;
added MDR; etc.)
byuu says:
Substantial improvements to SPC7110 emulation. Added all of the findings
from http://byuu.org/temp/spc7110-mmio.txt that I understood.
I also completely rewrote the RTC. We only had about ~40% of the chip
emulated before. Turns out there's cool stuff like spare RAM, calendar
disable, 12-hour mode, IRQs, IRQ masking, duty cycles, etc. So I went
ahead and emulated all of it. The upper bits on hour+ don't work as
nocash described though, not sure what doc he was reading. The Epson
RTC-4513 manual I have doesn't explain any of the registers.
The new RTC core also ticks seconds based on the emulated clock, and not
on the system clock. This is going to suck for people wanting to keep
the in-game clock synced with their computer, who also abuse fast
forward and save states. Fast forward makes the clock run faster, and
save states will jump the clock to the time it was at when you took the
save state. (It will keep track of the number of seconds between
unloading the game and loading it again, so time passes normally there.)
This is required, however, and how I'm going to rearrange all of the
RTCs for all systems. Any other method can be detected by the game, and
is thus not faithful emulation. To help with this, I'll probably make an
RTC time tool so that you can adjust the time when the emulator isn't
running, but I don't intend to bundle that into bsnes.
New state format bit-packs the RTCRAM values, and it also uses a 64-bit
timestamp. So it's 16 bytes now instead of 20 bytes. S-RTC will drop
from 16 to 12 when it's done.
The RTC busy flag timing needs to be refined with more hardware tests,
there's a slim chance of the game hanging on save at the moment.
The SPC7110 ALU delays are emulated now, too. They may not be perfectly
accurate, but they get the basic gist down.
The only hack that needs to be removed now is the decompression busy
flag. That's ... not going to be fun.
I also redid the mouse emulation. I was polling the mouse position
multiple times per latch. So it should be a bit more precise now,
I hope.
I read it regardless of latch state, dunno if that's good or not.
(r01 was not posted to the WIP thread)
byuu says:
r01 changelog:
- major improvements to SPC7110 MCU (memory controller unit)
- revised SPC7110 memory map to reflect aforementioned improvements
- added "Toggle Tracer" hotkey to target-ethos (only works for SFC so
far, I plan to use this as a lightweight laevateinn for FEoEZ)
r02 changelog:
- quick fix: SRAM is mapped to 00-3f|80-bf:6000-7fff
- quick fix: $4830.d7 is SRAM chip enable, not SRAM write enable. Reads
return 0x00 when this bit is clear
byuu says:
Changelog to v089:
- fix SA-1 Mini Yonku Shining Scorpion
- load from command-line
- remove SNES::Cartridge::NVRAM
- fix SGB save RAM
- update cheats.xml
- already mapped inputs cancel input assign
BS-X wasn't broken after all. I forgot that I ran purify on my BS-X
images, and that the BS Zelda ZIP I have has the disable ROM bit set.
Whoops.
byuu says:
Changelog:
- fixed BGnxOFS to not cache when MOSAIC is not in effect [fixes Air
Strike Patrol "Good Luck" text]
- added GameBoy::Interface::Hook for SGB bindings [SGB works again]
- do not create bsnes/ folder unless it is absolutely needed (eg you
create a save state or state manager archive)
- SuperFX works [needed to call system.init() in Interface::Interface()]
Last chance for any bug reports, at this point I pretty much consider
ethos to be finished. It's shipping without BS-X BIOS game loading
support. Sorry, I can't figure that one out.
byuu says:
Changelog:
- default placement of presentation window optimized for 1024x768
displays or larger (sorry if yours is smaller, move the window
yourself.)
- Direct3D waits until a previous Vblank ends before waiting for the
next Vblank to begin (fixes video timing analysis, and ---really---
fast computers.)
- Window::setVisible(false) clears modality, but also fixed in Browser
code as well (fixes loading images on Windows hanging)
- Browser won't consume full CPU resources (but timing analysis will,
I don't want stalls to affect the results.)
- closing settings window while analyzing stops analysis
- you can load the SGB BIOS without a game (why the hell you would want
to ...)
- escape closes the Browser window (it won't close other dialogs, it has
to be hooked up per-window)
- just for fun, joypad hat up/down moves in Browser file list, any
joypad button loads selected game [not very useful, lacks repeat, and
there aren't GUI load file open buttons]
- Super Scope and Justifier crosshairs render correctly (probably
doesn't belong in the core, but it's not something I suspect people
want to do themselves ...)
- you can load GB, SGB, GB, SGB ... without problems (not happy with how
I did this, but I don't want to add an Interface::setInterface()
function yet)
- PAL timing works as I want now (if you want 50fps on a 60hz monitor,
you must not use sync video) [needed to update the DSP frequency when
toggling video/audio sync]
- not going to save input port selection for now (lot of work), but it
will properly keep your port setting across cartridge loads at least
[just goes to controller on emulator restart]
- SFC overscan on and off both work as expected now (off centers image,
on shows entire image)
- laevateinn compiles properly now
- ethos goes to ~/.config/bsnes now that target-ui is dead [honestly,
I recommend deleting the old folder and starting over]
- Emulator::Interface callbacks converted to virtual binding structure
that GUI inherits from (simplifies binding callbacks)
- this breaks Super Game Boy for a bit, I need to rethink
system-specific bindings without direct inheritance
Timing analysis works spectacularly well on Windows, too. You won't get
your 100% perfect rate (unless maybe you leave the analysis running
overnight?), but it'll get really freaking close this way.
byuu says:
Changelog:
- added NSS DIP switch settings window (when loading NSS carts with
appropriate manifest.xml file)
- added video shader selection (they go in ~/.config/bsnes/Video
Shaders/ now)
- added driver selection
- added timing settings (not only allows video/audio settings, also has
code to dynamically compute the values for you ... and it actually
works pretty good!)
- moved "None" controller device to bottom of list (it is the least
likely to be used, after all)
- added Interface::path() to support MSU1, USART, Link
- input and hotkey mappings remember list position after assignment
- and more!
target-ethos now has all of the functionality of target-ui, and more.
Final code size for the port is 101.2KB (ethos) vs 167.6KB (ui).
A ~67% reduction in code size, yet it does even more! And you can add or
remove an entire system with only three lines of code (Makefile include,
header include, interface append.)
The only problem left is that the BS-X BIOS won't load the BS Zelda no
Densetsu file.
I can't figure out why it's not working, would appreciate any
assistance, but otherwise I'm probably just going to leave it broken for
v089, sorry.
So the show stoppers for a new release at this point are:
- fix laevateinn to compile with the new interface changes (shouldn't be
too hard, it'll still use the old, direct interface.)
- clean up Emulator::Interface as much as possible (trim down
Information, mediaRequest should use an alternate struct designed to
load firmware / slots separately)
- enhance purify to strip SNES ROM headers, and it really needs a GUI
interface
- it would be highly desirable to make a launcher that can create
a cartridge folder from an existing ROM set (* ethos will need to
accept command-line arguments for this.)
- probably need to remember which controller was selected in each port
for each system across runs
- need to fix the cursor for Super Scope / Justifier games (move from
19-bit to 32-bit colors broke it)
- have to refactor that cache.(hv)offset thing to fix ASP
byuu says:
Changelog:
- fixed Super Game Boy input
- Sufami Turbo prompts to load second slot now (you can cancel to leave
it empty)
- NEC/Hitachi/ARM DSP firmware is loaded; NEC RAM is saved
- folders are grouped properly: Sufami Turbo save RAM saves to its slot
folder, etc.
- title shows properly (SGB shows GB game name only, BS-X slotted shows
game name and optional slot name, etc.)
- above extends to saving cheats and such in their correct folders
as well
- added cheat editor and cheat database
- and hooked up the requisite SGB mode loads and can use GB cheats,
because that's kinda cool
- added state manager
- input settings, cheat editor and state manager all have erase (one)
and reset (all) buttons now
- lots of cleanup and restructuring on Emulator::Interface; *almost*
finished with it now
Remaining:
- BS-X BIOS won't show the data pack
- need XML mapping information window
- need NSS DIP switch settings window
- need video shaders
- need driver selection
- need to hide controllers that have no inputs from the input mapping
list (tempted to just remove "None" as a controller option ...)
ethos is currently 88KB of code, ui is 167KB. We're missing about 5-10KB
of code in ethos to complete it, so the rewrite nearly cut the GUI code
size in half, while support all of the same functionality and allowing
the easy addition and removal of entire systems.
byuu says:
Changelog:
- all hotkeys from target-ui now exist in target-ethos
- controller port menus now show up when you load a system (hidden if
there are no options to choose from)
- tools menu auto-hides with no game open ... not much point to it then
- since we aren't using RawInput's multi-KB/MS support anyway, input and
hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it
a lot easier to read
- added mute audio, sync video, sync audio, mask overscan
- added video settings: saturation, gamma, luminance, overscan
horizontal, overscan vertical
- added audio settings: frequency, latency, resampler, volume
- added input settings: when focus is lost [ ] pause emulator [ ] allow
input
- pausing and autopausing works
- status messages hooked up (show a message in status bar for a few
seconds, then revert to normal status text)
- sub systems (SGB, BSX, ST) sorted below primary systems list
- added geometry settings cache
- Emulator::Interface cleanups and simplifications
- save states go into (cart foldername.extension/bsnes/state-#.bsa) now.
Idea is to put emulator-specific data in their own subfolders
Caveats / Missing:
- SGB input does not work
- Sufami Turbo second slot doesn't work yet
- BS-X BIOS won't show the data pack
- need XML mapping information window
- need cheat editor and cheat database
- need state manager
- need video shaders
- need driver selection
- need NSS DIP switch settings
- need to hide controllers that have no inputs from the input mapping
list
So for video settings, I used to have contrast/brightness/gamma.
Contrast was just a multiplier on intensity of each channel, and
brightness was an addition or subtraction against each channel. They
kind of overlapped and weren't that effective. The new setup has
saturation, gamma and luminance.
Saturation of 100% is normal. If you lower it, color information goes
away. 0% = grayscale. If you raise it, color intensity increases (and
clamps.) This is wonderful for GBA games, since they are oversaturated
to fucking death. Of course we'll want to normalize that inside the
core, so the same sat. value works on all systems, but for now it's
nice. If you raise saturation above 100%, it basically acts like
contrast used to. It's just that lowering it fades to grayscale rather
than black.
Adding doesn't really work well for brightness, it throws off the
relative distance between channels and looks like shit. So now we have
luminance, which takes over the old contrast <100% role, and just fades
the pixels toward black. Obviously, luminance > 100% would be the same
as saturation > 100%, so that isn't allowed, it caps at 100% now.
Gamma's the same old function. Gamma curve on the lower-half of the
color range.
Effects are applied in the order they appear in the GUI: color ->
saturate -> gammify -> luminate -> output.
byuu says:
Changelog:
- phoenix has added Window::setModal(bool modal = true);
- file dialog is now modal. This allows emulation cores to request data
and get it immediately before continuing the loading process
- save data is hooked up for most systems, still need to handle
subsystem slot saves (Sufami Turbo, basically.)
- toggle fullscreen key binding added (Alt+Enter for now. I think F11 is
probably better though, Enter is often mapped to game start button.)
- video scaling is in (center, scale, stretch), works the same in
windowed and fullscreen mode (stretch hides resize window option), all
in the settings menu now
- enough structure to map all saved paths for the browser and to load
BS-X slotted carts, BS-X carts, single Sufami Turbo carts
Caveats / Missing:
- Super Game Boy input doesn't work yet (due to change in callback
binding)
- doesn't load secondary Sufami Turbo slot yet
- BS-X BIOS isn't show the data pack games to load for some reason (ugh,
I hate the shit out of debugging BS-X stuff ...)
- need mute audio, sync audio+video toggle, save/load state menu and
quick keys, XML mapping information window
- need cheat editor and cheat database
- need state manager
- need to sort subsystems below main systems in load menu (basically
just see if media.slot.size() > 0)
- need video shaders (will probably leave off filters for the time being
... due to that 24/30-bit thing)
- need video adjustments (contrast etc, overscan masks)
- need audio adjustments (frequency, latency, resampler, volume,
per-system frequency)
- need driver selection and input focus policy (driver crash detection
would be nice too)
- need NSS DIP switch settings (that one will be really fun)
- need to save and load window geometry settings
- need to hook up controller selection (won't be fun), create a map to
hide controllers with no inputs to reassign
byuu says:
ethos is going to be absolutely amazing. You guys are in for a treat :D
I'm impressing the hell out of myself with how well-structured this code
is, it's allowing me to do amazing new things.
Just a small sampling of what's in store (and already implemented):
The file browser will display folders as "[ folder name ]", and
cartridge folders as "Game Name" (no extension, no /) [icons would be
nicer, but well ... phoenix.]
Folders are sorted above cartridge folders.
Cartridge folders for other systems do not show up in the list.
Not only are unique paths stored for each image type, your position in
the list is saved across runs.
Some voodoo was added to GTK+ so that all targets even scroll directly
to that item when you open the list. Load->System->Enter restarts your
last game.
That sounds really simple and obvious, but it makes an -incredible-
difference. Didn't realize it until I tried an implementation of it,
wow.
The input mapping list now lets you bind as many hotkeys as you want to
any given input.
So SFC::Port1::Joypad::B = Keyboard::Z or Joypad::Button1 ... no need to
remap everything to switch between keyboard and joypad. Either one
activates the key.
There is a separate Hotkeys tab now. This should hopefully end the
confusion about how to remap hotkeys that users experience.
Hotkeys are different, too. Instead of OR logic, they use AND logic.
So Fullscreen = Keyboard::Alt and Keyboard::Enter. Both must be pressed
to enter the key. This lets you easily implement "super" modifier keys.
The actual codebase has new features the old UI never had, and has about
~50% of the old functionality (so far, of course), yet is only ~25% as
much code.
The entire GUI no longer needs to pull in all the headers for each
emulated system. It just needs a small interface header file.
Then bind the entire system with exactly **two** lines of code.
Everything is dynamically generated for you after that.
byuu says:
Lots of work on ethos, nothing more.
Settings window is in, InputManager pulls all the inputs from all cores
and binds them to ruby inputs, main window adds menu and dynamically
maps in all systems and cartridge slots and options and such, file
browser's back in, RAM is loaded and saved, etc. It's barely usable, but
you have to set up your inputs from the config file by hand for now.
byuu says:
From this WIP, I'm starting on the impossible task of
a declarative-based GUI, which I'm calling Ethos.
base/ becomes emulator/, and we add emulator/interface.hpp, which is
a base API that all emulation cores must implement in full.
(Right now, it's kind of a hybrid to work with the old GUI and the new
GUI at the same time, of course.)
Unlike the old interfaces, the new base class also provides all general
usability hooks: loading and saving files and states, cheat codes, etc.
The new interface also contains information and vector structs to
describe all possible loading methods, controller bindings, etc; and
gives names for them all.
The actual GUI in fact should not include eg <gba/gba.hpp> anymore.
Should speed up GUI compilation.
So the idea going forward is that ethos will build a list of emulators
right when the application starts up.
Once you've appended an emulator to that list, you're done. No more GUI
changes are needed to support that system.
The GUI will have code to parse the emulator interfaces list, and build
all the requisite GUI options dynamically, declarative style.
Ultimately, once the project is finished, the new GUI should look ~99%
identical to the current GUI. But it'll probably be a whole lot smaller.
byuu says:
(r05 and r06 were save points between large core modifications)
I would really appreciate extensive regression testing (especially
around SuperFX, Cx4, ST018, DSP-n, ST-01n, NES, GB) at this point.
The most critical core changes should be completed now. And it was an
unbelievable amount of restructuring.
Changelog:
- SuperFX core moved to Processor::GSU
- SNES::CPU core moved to Processor::R65816
- SNES::SMP core moved to Processor::SPC700
- NES::CPU core renamed to Processor::R6502
- use filestream to load RAM files from interface
- save states store SHA256 instead of CRC32 (CRC32 usage removed
entirely from bsnes)
- nes/ -> fc/ and NES -> FC
- snes/ -> sfc/ and SNES -> SFC
- SuperFamicom::MappedRAM::copy uses stream instead of data+size
- Linux port uses gcc-4.7 (still using only gcc-4.6 subset, so you can
make a gcc-4.6 symlink for now if you like.)
- all profiles and all targets compile and work properly
All eight instruction set cores have been moved to processor/ now.
Consistency's a wonderful thing.
The last remnants of NES/SNES are now limited to target-ui code; and the
nall/(system) folder names.
I'm building with gcc-4.7 on my Linux box now because the resultant
binaries are up to 20% faster (seriously) than gcc-4.6.
byuu says:
This will hopefully be a short-lived WIP, I just want to save
a breakpoint before I attempt something else.
NES, GB, GBC and GBA all load via const stream& now.
NES CPU core moved to Processor::RP2A03.
byuu says:
static vector<uint8_t> file::read(const string &filename); replaces:
static bool file::read(const string &filename, uint8_t *&data, unsigned
&size); This allows automatic deletion of the underlying data.
Added vectorstream, which is obviously a vector<uint8_t> wrapper for
a data stream. Plan is for all data accesses inside my emulation cores
to take stream objects, especially MSU1. This lets you feed the core
anything: memorystream, filestream, zipstream, gzipstream, httpstream,
etc. There will still be exceptions for link and serial, those need
actual library files on disk. But those aren't official hardware devices
anyway.
So to help with speed a bit, I'm rethinking the video rendering path.
Previous system:
- core outputs system-native samples (SNES = 19-bit LRGB, NES = 9-bit
emphasis+palette, DMG = 2-bit grayscale, etc.)
- interfaceSystem transforms samples to 30-bit via lookup table inside
the emulation core
- interfaceSystem masks off overscan areas, if enabled
- interfaceUI runs filter to produce new target buffer, if enabled
- interfaceUI transforms 30-bit video to native display depth (24-bit or
30-bit), and applies color-adjustments (gamma, etc) at the same time
New system:
- all cores now generate an internal palette, and call
Interface::videoColor(uint32_t source, uint16_t red, uint16_t green,
uint16_t blue) to get native display color post-adjusted (gamma, etc
applied already.)
- all cores output to uint32_t* buffer now (output video.palette[color]
instead of just color)
- interfaceUI runs filter to produce new target buffer, if enabled
- interfaceUI memcpy()'s buffer to the video card
videoColor() is pretty neat. source is the raw pixel (as per the
old-format, 19-bit SNES, 9-bit NES, etc), and you can create a color
from that if you really want to. Or return that value to get a buffer
just like v088 and below. red, green, blue are 16-bits per channel,
because why the hell not, right? Just lop off all the bits you don't
want. If you have more bits on your display than that, fuck you :P
The last step is extremely difficult to avoid. Video cards can and do
have pitches that differ from the width of the texture. Trying to make
the core account for this would be really awful. And even if we did
that, the emulation routine would need to write directly to a video card
RAM buffer. Some APIs require you to lock the video buffer while
writing, so this would leave the video buffer locked for a long time.
Probably not catastrophic, but still awful. And lastly, if the
emulation core tried writing directly to the display texture, software
filters would no longer be possible (unless you -really- jump through
hooks and divert to a memory buffer when a filter is enabled, but ...
fuck.)
Anyway, the point of all that work was to eliminate an extra video copy,
and the need for a really painful 30-bit to 24-bit conversion (three
shifts, three masks, three array indexes.) So this basically reverts us,
performance-wise, to where we were pre-30 bit support.
[...]
The downside to this is that we're going to need a filter for each
output depth. Since the array type is uint32_t*, and I don't intend to
support higher or lower depths, we really only need 24+30-bit versions
of each filter. Kinda shitty, but oh well.
byuu says:
Basically, the current implementation of nall/array is deprecated now.
The old method was for non-reference types, it acted like a vector for
POD types (raw memory allocation instead of placement new construction.)
And for reference types, it acted like an unordered set. Yeah, not good.
As of right now, nall/array is no longer used. The vector type usage was
replaced with actual vectors.
I've created nall/set, which now contains the specialization for
reference types.
nall/set basically acts much like std::unordered_set. No auto-sort, only
one of each type is allowed, automatic growth.
This will be the same both for reference and non-reference types ...
however, the non-reference type wasn't implemented just yet.
Future plans for nall/array are for it to be a statically allocated
block of memory, ala array<type, size>, which is meant for RAII memory
usage.
Have to work on the specifics, eg the size as a template parameter may
be problematic. I'd like to return allocated chunks of memory (eg
file::read) in this container so that I don't have to manually free the
data anymore.
I also removed nall/moduloarray, and moved that into the SNES DSP class,
since that's the only thing that uses it.
byuu says:
Changes to v088:
- OBJ mosaic Y fix
- Laevateinn compilation
- Remove filebrowser extra code
- Fix -march=native on Windows
- Fix purify mkdir
- GBA sound volume
- Add .gbb
- free firmware memory after file load
- Add GBA game to profile list (Yoshi's Island should work)
byuu says:
Changelog:
- DMA channel masks added (some are 27-bit source/target and some are
14-bit length -- hooray, varuint_t class.)
- No more state.pending flags. Instead, we set dma.pending flag when we
want a transfer (fixes GBA Video - Pokemon audio) [Cydrak]
- fixed OBJ Vmosaic [Cydrak, krom]
- OBJ cannot read <=0x13fff in BG modes 3-5 (fixes the garbled tile at
the top-left of some games)
- DMA timing should be much closer to hardware now, but probably not
perfect
- PPU frame blending uses blargg's bit-perfect, rounded method (slower,
but what can you do?)
- GBA carts really unload now
- added nall/gba/cartridge.hpp: used when there is no manifest. Scans
ROMs for library tags, and selects the first valid one found
- added EEPROM auto-detection when EEPROM size=0. Forces disk/save state
size to 8192 (otherwise states could crash between pre and post
detect.)
- detects first read after a set read address command when the size
is zero, and sets all subsequent bit-lengths to that value, prints
detected size to terminal
- added nall/nes/cartridge.hpp: moves iNES detection out of emulation
core.
Important to note: long-term goal is to remove all
nall/(system)/cartridge.hpp detections from the core and replace with
databases. All in good time.
Anyway, the GBA workarounds should work for ~98.5% of the library, if my
pre-scanning was correct (~40 games with odd tags. I reject ones without
numeric versions now, too.)
I think we're basically at a point where we can release a new version
now. Compatibility should be relatively high (at least for a first
release), and fixes are only going to affect one or two games at a time.
I'd like to start doing some major cleaning house internally (rename
NES->Famicom, SNES->SuperFamicom and such.) Would be much wiser to do
that on a .01 WIP to minimize regressions.
The main problems with a release now:
- speed is pretty bad, haven't really optimized much yet (not sure how
much we can improve it yet, this usually isn't easy)
- sound isn't -great-, but the GBA audio sucks anyway :P
- couple of known bugs (Sonic X video, etc.)
byuu says:
Changelog:
- revised NES XML tag nesting
- program.rom is going to refer to PRG+CHR combined. Split is going to
have to use different file names
- slot loader is gone (good riddance!)
- "Cartridge -> Load Game Boy Advance Cartridge ..." has become "Load ->
Game Boy Advance ..."
- Load Satellaview Slotted Cartridge is gone. If you load an SNES
cartridge and it sees <bsx><slot>, it asks if you want to load a BS-X
data pack
- If you load a Sufami Turbo cartridge with <cartridge linkable="true">,
it asks if you want to link in another Sufami Turbo cartridge
- if you try and load the same exact Sufami Turbo cartridge in both
slots, it yells at you for being an idiot :P
byuu says:
Be sure to run make install, and move required images to their appropriate system profile folders.
I still have no warnings in place if those images aren't present.
Changelog:
- OBJ mosaic should hopefully be emulated correctly now (thanks to krom
and Cydrak for testing the hardware behavior)
- emulated dummy serial registers, fixes Sonic Advance (you may still
need to specify 512KB FlashROM with an appropriate ID, I used
Panaonic's)
- GBA core exits scheduler (PPU thread) and calls
interface->videoRefresh() from main thread (not required, just nice)
- SRAM, FRAM, EEPROM and FlashROM initialized to 0xFF if it does not
exist (probably not needed, but FlashROM likes to reset to 0xFF
anyway)
- GBA manifest.xml for file-mode will now use "gamename.xml" instead of
"gamename.gba.xml"
- started renaming "NES" to "Famicom" and "SNES" to "Super Famicom" in
the GUI (may or may not change source code in the long-term)
- removed target-libsnes/
- added profile/
Profiles are the major new feature. So far we have:
Famicom.sys/{nothing (yet?)}
Super Famicom.sys/{ipl.rom}
Game Boy.sys/{boot.rom}
Game Boy Color.sys/{boot.rom}
Game Boy Advance.sys/{bios.rom[not included]}
Super Game Boy.sfc/{boot.rom,program.rom[not included]}
BS-X Satellaview.sfc/{program.rom,bsx.ram,bsx.pram}
Sufami Turbo.sfc/{program.rom}
The SGB, BSX and ST cartridges ask you to load GB, BS or ST cartridges
directly now. No slot loader for them. So the obvious downsides: you
can't quickly pick between different SGB BIOSes, but why would you want
to? Just use SGB2/JP. It's still possible, so I'll sacrifice a little
complexity for a rare case to make it a lot easier for the more common
case. ST cartridges currently won't let you load the secondary slot.
BS-X Town cart is the only useful game to load with nothing in the slot,
but only barely, since games are all seeded on flash and not on PSRAM
images. We can revisit a way to boot the BIOS directly if and when we
get the satellite uplink emulated and data can be downloaded onto the
PSRAM :P BS-X slotted cartridges still require the secondary slot.
My plan for BS-X slotted cartridges is to require a manifest.xml to
specify that it has the BS-X slot present. Otherwise, we have to load
the ROM into the SNES cartridge class, and parse its header before we
can find out if it has one. Screw that. If it's in the XML, I can tell
before loading the ROM if I need to present you with an optional slot
loading dialog. I will probably do something similar for Sufami Turbo.
Not all games even work with a secondary slot, so why ask you to load
a second slot for them? Let the XML request a second slot. A complete
Sufami Turbo ROM set will be trivial anyway. Not sure how I want to do
the sub dialog yet. We want basic file loading, but we don't want it to
look like the dialog 'didn't do anything' if it pops back open
immediately again. Maybe change the background color of the dialog to
a darker gray? Tacky, but it'd give you the visual cue without the need
for some subtle text changes.
byuu says:
Changelog:
- serialize processor.pc.data, not processor.pc
- call CPU processor.setMode() in ARM serialize
- serialize BIOS.mdr
- support SRAM > 32KB
- EEPROM, FlashROM serialize
- EEPROM lose nall/bitarray.hpp
- noise line feed after envelope
- space out PSR read
- ST018 needs byte reads fixed (don't align) [fixes HNMS2]
- flush sram/eeprom/flashrom to 0 on cartridge load
- APU/PPU dont sync back to CPU if syncing for state
- fixed APU sync problems in GB/GBC core that could possibly wreck save
states as well
Quite a lot of little problems there. I believe GBA save states are
fixed now.
byuu says:
Changelog:
- fixed FIFO[1] reset behavior (fixes audio in Sword of Mana)
- added FlashROM emulation (both sizes)
- GBA parses RAM settings from manifest.xml now
- save RAM is written to disk now
- added save state support (it's currently broken, though)
- fixed ROM/RAM access timings
- open bus should mostly work (we don't do the PC+12 stuff yet)
- emulated the undocumented memory control register (mirror IWRAM,
disable I+EWRAM, EWRAM wait state count)
- emulated keypad interrupts
- emulated STOP (freezes video, audio, DMA and timers; only breaks on
keypad IRQs)
- probably a lot more, it was a long night ...
Show stoppers, missing things, broken things, etc:
- ST018 is still completely broken
- GBC audio sequencer apparently needs work
- GBA audio FIFO buffer seems too quiet
- PHI / ROM prefetch needs to be emulated (no idea on how to do this,
especially PHI)
- SOUNDBIAS 64/128/256khz modes should output at that resolution
(really, we need to simulate PWM properly, no idea on how to do this)
- object mosaic top-left coordinates are wrong (minor, fixing will
actually make the effect look worse)
- need to emulate PPU greenswap and color palette distortion (no idea on
how do this)
- need GBA save type database (I would also LIKE to blacklist
/ patch-out trainers, but that's a discussion for another day.)
- some ARM ops advance the prefetch buffer, so you can read PC+12 in
some cases
byuu says:
(r24 was a point release during merging of changes.)
This release is almost entirely Cydrak's direct work:
- Added ARM::sequential() and some WAITCNT timings
- Added Bus::io(uint32 pc), intended for prefetch timing
- Added ARM::load() with data rotation (fixed Mother 3 graphics)
- Added ARM::store() for data mirroring
- LDM, STM, and instruction fetch still use read/write()
- ARM::vector() no longer unmasks FIQs
- Set THUMB shifter flags via bit(), consistent with ARM
- Replace shifter loops with conditional tests
My changes:
- fixed sprite clipping on left-edge of screen
- added first system folder, GBA.system
- sudo make install is now make install
- make install will create GBA.system for you in your home folder
Windows users, take data/GBA.system and put it in the same folder as
bsnes.exe, and give it a BIOS named bios.rom
Or place it in your home folder (%APPDATA%/bsnes)
Also note that this is highly experimental, I'll probably be changing
things a lot before release.
EDIT: I botched the cartridge timing change. Will fix in r26. It'll
still run a bit too fast for now, unfortunately.
byuu says:
Changelog:
- fixed cascading timers and readouts (speed hit from 320fps to 240fps;
would be 155fps with r20 timers) (fixes Spyro)
- OBJ mode 3 acts like OBJ mode 2 now (may not be correct, but nobody
has info on it)
- added background + object vertical+horizontal mosaic in all modes
(linear+affine+bitmap)
- object mosaic uses sprite (0,0) for start coordinates, not screen
(0,0) (again, nobody seems to have info on it)
- BIOS cannot be read by r(15)>=0x02000000; returns last BIOS read
instead (I can't believe games rely on this to work ... fixes SMA
Mario Bros.)
Mosaic is what concerns me the most, I've no idea if I'm doing it
correctly. But anything is probably better than nothing, so there's
that. I don't really notice the effect in Metroid Fusion. So either it's
broken, or it's really subtle.
byuu says:
Changelog:
- fixed below pixel green channel on color blending
- added semi-transparent objects [Exophase's method]
- added full support for windows (both inputs, OBJ windows, and output, with optional color effect disable)
- EEPROM uses nall::bitarray now to be friendlier to saving memory to disk
- removed incomplete mosaic support for now (too broken, untested)
- improved sprite priority. Hopefully it's right now.
Just about everything should look great now. It took 25 days, but we
finally have the BIOS rendering correctly.
In order to do OBJ windows, I had to drop my above/below buffers
entirely. I went with the nuclear option. There's separate layers for
all BGs and objects. I build the OBJ window table during object
rendering. So as a result, after rendering I go back and apply windows
(and the object window that now exists.) After that, I have to do
a painful Z-buffer select of the top two most important pixels. Since
I now know the layers, the blending enable tests are a lot nicer, at
least. But this obviously has quite a speed hit: 390fps to 325fps for
Mr. Driller 2 title screen.
TONC says that "bad" window coordinates do really insane things. GBAtek
says it's a simple y2 < y1 || y2 > 160 ? 160 : y2; x2 < x1 || x2 > 240
? 240 : x2; I like the GBAtek version more, so I went with that. I sure
hope it's right ... but my guess is the hardware does this with
a counter that wraps around or something. Also, say you have two OBJ
mode 2 sprites that overlap each other, but with different priorities.
The lower (more important) priority sprite has a clear pixel, but the
higher priority sprite has a set pixel. Do we set the "inside OBJ
window" flag to true here? Eg does the value OR, or does it hold the
most important sprite's pixel value? Cydrak suspects it's OR-based,
I concur from what I can see.
Mosaic, I am at a loss. I really need a lot more information in order to
implement it. For backgrounds, does it apply to the Vcounter of the
entire screen? Or does it apply post-scroll? Or does it even apply after
every adjust in affine/bitmap modes? I'm betting the hcounter
background mosaic starts at the leftmost edge of the screen, and repeats
previous pixels to apply the effect. Like SNES, very simple. For
sprites, the SNES didn't have this. Does the mosaic grid start at (0,0)
of the screen, or at (0,0) of each sprite? The latter will look a lot
nicer, but be a lot more complex. Is mosaic on affine objects any
different than mosaic of linear(tiled) objects?
With that out of the way, we still have to fix the CPU memory access
timing, add the rest of the CPU penalty cycles, the memory rotation
/ alignment / extend behavior needs to be fixed, the shifter desperately
needs to be moved from loops to single shift operations, and I need to
add flash memory support.
byuu says:
Timer speedup added. Boosts Mr. Driller 2 title from 170fps to 400fps.
Other games still benefit, but not as amazingly. I don't dip below
160fps ever here.
Reverted the memory speed to 2 for everything for now, to fix
Castlevania slowdown. We obviously need to add the N/S stuff before we
do that.
Added linear BG and linear OBJ mosaic-Y. Did not add mosaic-X, or any
mosaic to the affine/bitmap modes, because I'm not sure when to apply
the compensation.
Rewrote layer stuff. It now has two layers (above and below), and it
performs the four blending modes as needed.
Didn't add semi-transparent sprites because the docs are too confusing.
Added a blur filter directly into the PPU for now. This obviously
violates my interface, but F-Zero needed it for HUD display. We can
remove it when we have an official release with a blur filter available.
The filter still doesn't warp colors like a real GBA, because I don't
know the formula.
byuu says:
Changelog:
- HALT waits 16 cycles before testing IRQs instead of 1 (probably less
precise, but provides a massive speedup) [we will need to work on this
later]
- MMIO regs for CPU/PPU simplified by combining array accesses
- custom VRAM/PRAM/OAM read/write functions that emulate 8->16-bit
writes
- 16-bit PRAM data (decent speedup)
- emulated memory access speed (but don't handle non-sequential
penalties or PPU access penalties yet) [amazingly, doesn't help speed
at all]
- misc. code cleanups
For this WIP, FPS for Mr. Driller 2 went from 88fps to 172fps.
Compatibility should be unchanged. Timers are still an interesting
avenue to increase performance, but will be very tough to handle the
16MHz timers with eg a period of 65535 (overflow every single tick.) And
that's basically the last major speed boost we'll be able to get.
Blending and windowing is going to hurt performance, but it remains to
be seen how much.
byuu says:
Changelog:
- added FIFO buffer emulation (with DMA and all that jazz) [Cydrak]
- fixed timers and vcounter assign [Cydrak]
- emulated EEPROM (you have to change size manually for 14-bit mode, we
need a database badly now) [SMA runs now]
- removed OAM array, now decoding directly to struct Object {} [128] and
ObjectParam {} [32] (faster this way)
- check forceblank (still doesn't remove all garble between transitions,
though??)
- lots of other stuff
Delete your settings.cfg, or manually change frequencyGBA to 32768, or
bad things will happen (this may change back to 256KHz-4MHz later.)
15 of 16 games are fully playable now, and look and sound great.
The major missing detail right now is PPU blending support, and we
really need to optimize the hell out of the code.
byuu says:
Merged Cydrak's r17c changes:
- BG affine mode added
- BG bitmap mode added
- OBJ affine mode added
- fixed IRQ bug in THUMB mode (fixed almost every game)
- timers added (broke almost every game, whee.)
Cydrak is absolutely amazingly awesome and patient. This really wouldn't
be happening without him.
Also fixed some things from my end, including greatly improved sprite
priorities, and a much better priority sorter. Mr. Driller looks a lot
better now.
byuu says:
Emulated GBC sound plus the new extensions to it.
I am kind of surprised by how little developers utilized the GBC audio
portion.
Mr. Driller now has sound effects, and Pinobee no Daibouken has BGM.
I still have yet to emulate the GBA extra sound channels and PWM. Need
to emulate timers and DMA 2 refresh mode before I can do that.
Also, I moved both GBC and GBA audio to use length = data; if(++length
== 0); rather than length = 64 - data; if(--length == 0); so that
I could return literal values for register reads.
I thought there was a good reason we used the latter version, but
I can't hear any audible difference even in GBC games, so oh well.
Lastly, I think the pattern[++offset] in the wave channel was a bug in
the DMG/GBC only. I really, really hope it doesn't apply to the GBA,
because that will make bank selection a serious pain in the ass.
byuu says:
Fixed the r15 mask per Cydrak.
Added DMA support (immediate + Vblank + Hblank + HDMA) with IRQ support.
Basically only missing FIFO reload mode for the APU on channel 2.
Added background linear renderer (tilemap mode.)
Added really inefficient pixel priority selector, so that all BGs+OBJ
could be visible onscreen at the same time.
As a result of the above:
* Mr. Driller is our first fully playable game
* Bakunetsu Dodge Ball Fighters is also fully playable
* Pinobee no Daibouken is also fully playable
Most games (15 of 16 tested) are now showing *something*, many things
look really really good in fact.
Absolutely essential missing components:
- APU
- CPU timers and their interrupts
- DMA FIFO mode
- OBJ affine mode
- BG affine mode
- BG bitmap mode
- PPU windows (BG and OBJ)
- PPU mosaic
- PPU blending modes
- SRAM / EEPROM (going to rely on a database, not heuristics. Homebrew
will require a manifest file.)
byuu says:
Added linear (eg non-affine) sprite rendering, 4bpp and 8bpp with hflip
and vflip. Nothing else.
You can now see the Nintendo logo and Gameboy text at the end of the BIOS.
It's a start =)
byuu says:
Fixed aforementioned issues.
[From a previous post:
- mul was using r(d) instead of r(n) for accumulate.
- mull didn't remove c/v clear.
- APU register mask was broken, so SOUNDBIAS was reading out wrong.
- APU was only mapping 0x088 and not 0x089 as well.
- Halfword reads in CPU+PPU+APU were all reading from the low address
each time.]
All CPU+PPU registers are now hooked up (not that they do anything.)
SOUNDBIAS for APU was hooked up, got tired of working on it for the rest :P
I recall from the GB APU that you can't just assign values for the APU
MMIO regs. They do odd reload things as well.
Also, was using MMIO read code like this:
return (
(flaga << 0)
|| (flagb << 1)
|| (flagc << 2)
);
Logical or doesn't work so well with building flags :P
Bad habit from how I split multiple conditionals across several lines.
So ... r14 is basically what r13 should have been yesterday, delaying my
schedule by yet another day :(
byuu says:
Contains all of Cydrak's fixes, sans PPU.
On the PPU front, I've hooked up 100% of read and write registers.
All three DISPSTAT IRQs (Vblank, Hblank, Vcoincidence) are connected now
as well.
Super Mario Advance now runs without *appearing* to crash, although it's
hard to tell since I have no video or sound :P
ARM Wrestler is known to run, as is the BIOS.
byuu says:
Enough to get through the BIOS and into cartridge ROM.
I am a bit annoyed that I was basically told that the GBA PPU wasn't
that bad. Sprites are a clusterfuck, easily worse than Mode7, docs don't
even begin to explain them in enough detail.
This is going to be fun.
byuu says:
Added all of the above fixes and changes. [A lot of individual fixes for
the ARM core from Cydrak - Ed.] Also new is pipeline_decode() to fetch
data, and IME/IE/IF support, and an ARM::processor.irqline flag that
triggers IRQs at 0x18. Only Vblank is hooked up, which is what SWI 4 was
waiting on previously.
I'm sure my interrupt support is horribly broken and wrong. I was never
able to really figure out IE/IF on the Game Boy, so there's no question
this is even worse.
It's now going crazy and writing 0 to IE forever now after the Vblank
IRQ triggers.
byuu says:
Changelog:
- fixed THUMB hi immediate reads (immediate * 4)
- cartridge is properly mirrored to 32MB (eg 12mbit repeats as
lo8+hi4+hi4+lo8+hi4+hi4) [so it's a bit slower than a standard memcpy
fill]
- added ARM - load/store halfword register offset
- added ARM - load/store halfword immediate offset
- added ARM - load signed halfword/byte register offset
- added ARM - load signed halfword/byte immediate offset
- added decode() function to make opcode bit testing a lot clearer
(didn't apply it to the debugger yet)
All ARMv4M and all THUMBv4 instructions should now be implemented.
Although I'm not sure if my implementations of the new instructions are
correct.
byuu says:
Split apart necdsp: core is now in processor/upd96050 (wish I had
a better name for it, but there's no family name that is maskable.)
I would like to support the uPD7720 in the core as well, just for
completeness' sake, but I'll have to modify the decoder to drop one bit
from each mode.
So ... I'll do that later. Worst part is even if I do, I won't be able
to test it :(
Added all of Cydrak's changes. I also simplified LDMIA/STMIA and
PUSH/POP by merging the outer loops.
Probably infinitesimally slower, but less code is nicer. Maybe GCC
optimization will expand it, who knows.
byuu says:
Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr
000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write().
Also moved the Hitachi HG51B core to processor/, and split it apart from
the snes/chip/hitachidsp implementation.
This one actually worked really well. Very clean split between MMIO/DMA
and the processor core. I may move a more generic DMA function inside
the core, not sure yet.
I still believe the HG51B169 to be a variant of the HG51BS family, but
given they're meant to be incredibly flexible microcontrollers, it's
possible that each variant gets its own instruction set.
So, who knows. We'll worry about it if we ever find another HG51B DSP,
I guess.
GBA BIOS is constantly reading from 04000300, but it never writes. If
I return prng()&1, I can get it to proceed until it hits a bad opcode
(stc opcode, which the GBA lacks a coprocessor so ... bad codepath.)
Without it, it just reads that register forever and keeps resetting the
system, or something ...
I guess we're going to have to try and get ARMwrestler working, because
the BIOS seems to need too much emulation code to do anything at all.
There was a "v087r07pre" release that I unfortunately missed.
byuu says (about v087r07pre):
Creates the bsnes/processor folder. This has a shared ARM core there
which both the GBA and ST018 inherit.
There are going to be separate decoders, and revision-specific checks,
to support the differences between v3+.
In the future, I also want to move the other processor cores here:
- GBZ80 (GB, GBC)
- 65816 (SNES CPU, SA-1)
- NEC uPD (7725, 96050, maybe 7720 just for fun)
- Hitachi HG51B169
- SuperFX
- SPC700
- 65(C?)02
Basically, the GBA/ST018 forces my hand to start coding a bit more like
a multi-system emulator.
Right now, the ST018 is broken. Hence the pre. Apparently the GBA core
being used now has some bugs. So this'll be a nice way to stress-test
the GBA core a bit before we make it to ARMwrestler.
byuu says (about v087r07):
Both snes/chip/armdsp and gba/cpu use processor/arm now.
Fixed THUMB to execute the BL prefix and suffix separately. I can now
get the GBA BIOS stuck in some kind of infinite loop. Hooray ...
I guess?
byuu says:
I believe I've implemented every THUMB instruction now, although I'm
sure there are dozens of bugs in the implementation.
It seems that the last jump taken is ending up being off-by-two. It's
probably due to not masking/adjusting PC correctly at certain points.
I don't know if any other bugs are being hit prior to this or not.
I don't implement any I/O registers yet, and the BIOS seems to be poking
at a few of them along the way, so ... who knows.
I could also be reading the log wrong, but it looks to me like there's
some PSR setting the mode flag register to 0, which is supposed to be an
undefined behavior mode ... perhaps mrs has no effect on the m/t bits,
and it just affects the i/f bits?
Tim Allen