2015-06-28 08:44:56 +00:00
|
|
|
//note: timings are completely unverified
|
|
|
|
//due to the ST018 chip design (on-die ROM), testing is nearly impossible
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto ArmDSP::busIdle() -> void {
|
2012-04-15 06:49:56 +00:00
|
|
|
step(1);
|
|
|
|
}
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto ArmDSP::busRead(uint mode, uint32 addr) -> uint32 {
|
2012-04-15 06:49:56 +00:00
|
|
|
step(1);
|
|
|
|
|
2015-11-14 00:52:51 +00:00
|
|
|
static auto memory = [&](const uint8* memory, uint mode, uint32 addr) -> uint32 {
|
2015-07-01 10:58:42 +00:00
|
|
|
if(mode & Word) {
|
2012-04-17 12:16:54 +00:00
|
|
|
memory += addr & ~3;
|
|
|
|
return memory[0] << 0 | memory[1] << 8 | memory[2] << 16 | memory[3] << 24;
|
2015-07-01 10:58:42 +00:00
|
|
|
} else if(mode & Byte) {
|
2012-04-17 12:16:54 +00:00
|
|
|
return memory[addr];
|
2015-07-01 10:58:42 +00:00
|
|
|
} else {
|
|
|
|
return 0; //should never occur
|
2012-04-17 12:16:54 +00:00
|
|
|
}
|
2012-03-23 10:43:39 +00:00
|
|
|
};
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
switch(addr & 0xe000'0000) {
|
|
|
|
case 0x0000'0000: return memory(programROM, mode, addr & 0x1ffff);
|
|
|
|
case 0x2000'0000: return pipeline.fetch.instruction;
|
|
|
|
case 0x4000'0000: break;
|
|
|
|
case 0x6000'0000: return 0x40404001;
|
|
|
|
case 0x8000'0000: return pipeline.fetch.instruction;
|
|
|
|
case 0xa000'0000: return memory(dataROM, mode, addr & 0x7fff);
|
|
|
|
case 0xc000'0000: return pipeline.fetch.instruction;
|
|
|
|
case 0xe000'0000: return memory(programRAM, mode, addr & 0x3fff);
|
2012-02-27 00:18:50 +00:00
|
|
|
}
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
addr &= 0xe000'003f;
|
2012-02-28 11:21:18 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
if(addr == 0x4000'0010) {
|
Update to v086r15 release.
byuu says:
Most importantly ... I'm now using "st018.rom" which is the program ROM
+ data ROM in one "firmware" file. Since all three Seta DSPs have the
ST01N stamp, unlike some of the arcade variants, I'm just going to go
with ST01N from now on instead of ST-001N. I was using the latter as
that's what Overload called them.
Moving on ...
The memory map should match real hardware now, and I even match the open
bus read results.
I also return the funky 0x40404001 for 60000000-7fffffff, for whatever
that's worth.
The CPU-side registers are also mirrored correctly, as they were in the
last WIP, so we should be good there.
I also simulate the reset pulse now, and a 0->!0 transition of $3804
will destroy the ARM CPU thread.
It will wait until the value is set back to zero to resume execution.
At startup, the ARM CPU will sleep for a while, thus simulating the
reset delay behavior.
Still need to figure out the exact cycle length, but that's really not
important for emulation.
Note in registers.hpp, the |4 in status() is basically what allows the
CPU program to keep going, and hit the checkmate condition.
If we remove that, the CPU deadlocks. Still need to figure out how and
when d4 is set on $3804 reads.
I can run any test program on both real hardware and in my emulator and
compare results, so by all means ... if you can come up with a test,
I'll run it.
2012-03-02 11:07:17 +00:00
|
|
|
if(bridge.cputoarm.ready) {
|
|
|
|
bridge.cputoarm.ready = false;
|
2012-03-31 08:14:31 +00:00
|
|
|
return bridge.cputoarm.data;
|
2012-02-28 11:21:18 +00:00
|
|
|
}
|
2012-02-27 00:18:50 +00:00
|
|
|
}
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
if(addr == 0x4000'0020) {
|
2012-03-31 08:14:31 +00:00
|
|
|
return bridge.status();
|
2012-02-27 00:18:50 +00:00
|
|
|
}
|
|
|
|
|
2015-07-01 10:58:42 +00:00
|
|
|
return 0;
|
2012-02-27 00:18:50 +00:00
|
|
|
}
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
auto ArmDSP::busWrite(uint mode, uint32 addr, uint32 word) -> void {
|
2012-04-15 06:49:56 +00:00
|
|
|
step(1);
|
|
|
|
|
2015-11-14 00:52:51 +00:00
|
|
|
static auto memory = [](uint8* memory, uint mode, uint32 addr, uint32 word) {
|
2015-07-01 10:58:42 +00:00
|
|
|
if(mode & Word) {
|
2012-03-23 10:43:39 +00:00
|
|
|
memory += addr & ~3;
|
|
|
|
*memory++ = word >> 0;
|
|
|
|
*memory++ = word >> 8;
|
|
|
|
*memory++ = word >> 16;
|
|
|
|
*memory++ = word >> 24;
|
2015-07-01 10:58:42 +00:00
|
|
|
} else if(mode & Byte) {
|
2012-03-23 10:43:39 +00:00
|
|
|
memory += addr;
|
|
|
|
*memory++ = word >> 0;
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
switch(addr & 0xe000'0000) {
|
|
|
|
case 0x0000'0000: return;
|
|
|
|
case 0x2000'0000: return;
|
|
|
|
case 0x4000'0000: break;
|
|
|
|
case 0x6000'0000: return;
|
|
|
|
case 0x8000'0000: return;
|
|
|
|
case 0xa000'0000: return;
|
|
|
|
case 0xc000'0000: return;
|
|
|
|
case 0xe000'0000: return memory(programRAM, mode, addr & 0x3fff, word);
|
2012-02-28 11:21:18 +00:00
|
|
|
}
|
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
addr &= 0xe000'003f;
|
|
|
|
word &= 0x0000'00ff;
|
Update to v086r15 release.
byuu says:
Most importantly ... I'm now using "st018.rom" which is the program ROM
+ data ROM in one "firmware" file. Since all three Seta DSPs have the
ST01N stamp, unlike some of the arcade variants, I'm just going to go
with ST01N from now on instead of ST-001N. I was using the latter as
that's what Overload called them.
Moving on ...
The memory map should match real hardware now, and I even match the open
bus read results.
I also return the funky 0x40404001 for 60000000-7fffffff, for whatever
that's worth.
The CPU-side registers are also mirrored correctly, as they were in the
last WIP, so we should be good there.
I also simulate the reset pulse now, and a 0->!0 transition of $3804
will destroy the ARM CPU thread.
It will wait until the value is set back to zero to resume execution.
At startup, the ARM CPU will sleep for a while, thus simulating the
reset delay behavior.
Still need to figure out the exact cycle length, but that's really not
important for emulation.
Note in registers.hpp, the |4 in status() is basically what allows the
CPU program to keep going, and hit the checkmate condition.
If we remove that, the CPU deadlocks. Still need to figure out how and
when d4 is set on $3804 reads.
I can run any test program on both real hardware and in my emulator and
compare results, so by all means ... if you can come up with a test,
I'll run it.
2012-03-02 11:07:17 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
if(addr == 0x4000'0000) {
|
Update to v086r15 release.
byuu says:
Most importantly ... I'm now using "st018.rom" which is the program ROM
+ data ROM in one "firmware" file. Since all three Seta DSPs have the
ST01N stamp, unlike some of the arcade variants, I'm just going to go
with ST01N from now on instead of ST-001N. I was using the latter as
that's what Overload called them.
Moving on ...
The memory map should match real hardware now, and I even match the open
bus read results.
I also return the funky 0x40404001 for 60000000-7fffffff, for whatever
that's worth.
The CPU-side registers are also mirrored correctly, as they were in the
last WIP, so we should be good there.
I also simulate the reset pulse now, and a 0->!0 transition of $3804
will destroy the ARM CPU thread.
It will wait until the value is set back to zero to resume execution.
At startup, the ARM CPU will sleep for a while, thus simulating the
reset delay behavior.
Still need to figure out the exact cycle length, but that's really not
important for emulation.
Note in registers.hpp, the |4 in status() is basically what allows the
CPU program to keep going, and hit the checkmate condition.
If we remove that, the CPU deadlocks. Still need to figure out how and
when d4 is set on $3804 reads.
I can run any test program on both real hardware and in my emulator and
compare results, so by all means ... if you can come up with a test,
I'll run it.
2012-03-02 11:07:17 +00:00
|
|
|
bridge.armtocpu.ready = true;
|
2012-03-23 10:43:39 +00:00
|
|
|
bridge.armtocpu.data = word;
|
2012-02-26 07:59:44 +00:00
|
|
|
}
|
Update to v086r16 release.
byuu says:
Cydrak, I moved the step from the opcode decoder and opcodes themselves
into bus_(read,write)(byte,word), to minimize code.
If that's not feasible for some reason, please let me know and I'll
change it back to your latest WIP.
This has your carry flag fix, the timer skeleton (doesn't really work
yet), the Booth two-bit steps, and the carry flag clear thing inside
multiply ops.
Also added the aforementioned reset delay and reset bit stuff, and fixed
the steps to 21MHz for instructions and 64KHz for reset pulse.
I wasn't sure about the shifter extra cycles. I only saw it inside one
of the four (or was it three?) opcodes that have shifter functions.
Shouldn't it be in all of them?
The game does indeed appear to be fully playable now, but the AI doesn't
exactly match my real cartridge.
This could be for any number of reasons: ARM CPU bug, timer behavior
bug, oscillator differences between my real hardware and the emulator,
etc.
However ... the AI is 100% predictable every time, both under emulation
and on real hardware.
- For the first step, move 九-1 to 八-1.
- The opponent moves 三-3 to 四-3.
- Now move 七-1 to 六-1.
- The opponent moves 二-2 to 八-8.
However, on my real SNES, the opponent moves 一-3 to 二-4.
2012-03-07 13:03:15 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
if(addr == 0x4000'0010) bridge.signal = true;
|
2012-03-10 12:37:36 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
if(addr == 0x4000'0020) bridge.timerlatch.byte(0) = word;
|
|
|
|
if(addr == 0x4000'0024) bridge.timerlatch.byte(1) = word;
|
|
|
|
if(addr == 0x4000'0028) bridge.timerlatch.byte(2) = word;
|
Update to v086r16 release.
byuu says:
Cydrak, I moved the step from the opcode decoder and opcodes themselves
into bus_(read,write)(byte,word), to minimize code.
If that's not feasible for some reason, please let me know and I'll
change it back to your latest WIP.
This has your carry flag fix, the timer skeleton (doesn't really work
yet), the Booth two-bit steps, and the carry flag clear thing inside
multiply ops.
Also added the aforementioned reset delay and reset bit stuff, and fixed
the steps to 21MHz for instructions and 64KHz for reset pulse.
I wasn't sure about the shifter extra cycles. I only saw it inside one
of the four (or was it three?) opcodes that have shifter functions.
Shouldn't it be in all of them?
The game does indeed appear to be fully playable now, but the AI doesn't
exactly match my real cartridge.
This could be for any number of reasons: ARM CPU bug, timer behavior
bug, oscillator differences between my real hardware and the emulator,
etc.
However ... the AI is 100% predictable every time, both under emulation
and on real hardware.
- For the first step, move 九-1 to 八-1.
- The opponent moves 三-3 to 四-3.
- Now move 七-1 to 六-1.
- The opponent moves 二-2 to 八-8.
However, on my real SNES, the opponent moves 一-3 to 二-4.
2012-03-07 13:03:15 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
if(addr == 0x4000'002c) bridge.timer = bridge.timerlatch;
|
2012-02-27 00:18:50 +00:00
|
|
|
}
|