Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
#ifdef CARTRIDGE_CPP
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
void Cartridge::parse_markup(const char* markup) {
|
Update to higan v091r14 and ananke v00r03 releases.
byuu says:
higan changelog:
- generates title displayed in emulator window by asking the core
- core builds title solely from "information/title" ... if it's not
there, you don't get a title at all
- sub-system load menu is gone ... since there are multiple revisions of
the SGB, this never really worked well anyway
- to load an SGB, BS-X or ST cartridge, load the base cartridge first
- "File->Load Game" moved to "Load->Import Game" ... may cause a bit of
confusion to new users, but I don't like having a single-item menu,
we'll just have to explain it to new users
- browser window redone to look like ananke
- home button here goes to ~/Emulation rather than just ~ like ananke,
since this is the home of game folders
- game folder icon is now the executable icon for the Tango theme
(orange diamond), meant to represent a complete game rather than
a game file or archive
ananke changelog:
- outputs GBC games to "Game Boy Color/" instead of "Game Boy/"
- adds the file basename to "information/title"
Known issues:
- using ananke to load a GB game trips the Super Famicom SGB mode and
fails (need to make the full-path auto-detection ignore non-bootable
systems)
- need to dump and test some BS-X media before releasing
- ananke lacks BS-X Satellaview cartridge support
- v092 isn't going to let you retarget the ananke/higan game folder path
of ~/Emulation, you will have to wait for a future version if that
bothers you so greatly
[Later, after the v092 release, byuu posted this additional changelog:
- kill laevateinn
- add title()
- add bootable, remove load
- combine file, library
- combine [][][] paths
- fix SFC subtype handling XML->BML
- update file browser to use buttons
- update file browser keyboard handling
- update system XML->BML
- fix sufami turbo hashing
- remove Cartridge::manifest
]
2012-12-25 05:31:55 +00:00
|
|
|
auto document = Markup::Document(markup);
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
information.title.cartridge = document["information/title"].text();
|
|
|
|
|
Update to higan v091r14 and ananke v00r03 releases.
byuu says:
higan changelog:
- generates title displayed in emulator window by asking the core
- core builds title solely from "information/title" ... if it's not
there, you don't get a title at all
- sub-system load menu is gone ... since there are multiple revisions of
the SGB, this never really worked well anyway
- to load an SGB, BS-X or ST cartridge, load the base cartridge first
- "File->Load Game" moved to "Load->Import Game" ... may cause a bit of
confusion to new users, but I don't like having a single-item menu,
we'll just have to explain it to new users
- browser window redone to look like ananke
- home button here goes to ~/Emulation rather than just ~ like ananke,
since this is the home of game folders
- game folder icon is now the executable icon for the Tango theme
(orange diamond), meant to represent a complete game rather than
a game file or archive
ananke changelog:
- outputs GBC games to "Game Boy Color/" instead of "Game Boy/"
- adds the file basename to "information/title"
Known issues:
- using ananke to load a GB game trips the Super Famicom SGB mode and
fails (need to make the full-path auto-detection ignore non-bootable
systems)
- need to dump and test some BS-X media before releasing
- ananke lacks BS-X Satellaview cartridge support
- v092 isn't going to let you retarget the ananke/higan game folder path
of ~/Emulation, you will have to wait for a future version if that
bothers you so greatly
[Later, after the v092 release, byuu posted this additional changelog:
- kill laevateinn
- add title()
- add bootable, remove load
- combine file, library
- combine [][][] paths
- fix SFC subtype handling XML->BML
- update file browser to use buttons
- update file browser keyboard handling
- update system XML->BML
- fix sufami turbo hashing
- remove Cartridge::manifest
]
2012-12-25 05:31:55 +00:00
|
|
|
auto cartridge = document["cartridge"];
|
2011-12-31 09:24:58 +00:00
|
|
|
region = cartridge["region"].data != "PAL" ? Region::NTSC : Region::PAL;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
Update to v091r11 release.
byuu says:
This release refines HSU1 support as a bidirectional protocol, nests SFC
manifests as "release/cartridge" and "release/information" (but release/
is not guaranteed to be finalized just yet), removes the database
integration, and adds support for ananke.
ananke represents inevitability. It's a library that, when installed,
higan can use to load files from the command-line, and also from a new
File -> Load Game menu option.
I need to change the build rules a bit for it to work on Windows (need
to make phoenix a DLL, basically), but it works now on Linux.
Right now, it only takes *.sfc file names, looks them up in the included
database, converts them to game folders, and returns the game folder
path for higan to load.
The idea is to continue expanding it to support everything we can that
I don't want in the higan core:
- load *.sfc, *.smc, *.swc, *.fig files
- remove SNES copier headers
- split apart merged firmware files
- pull in external firmware files (eg dsp1b.rom - these are staying
merged, just as SPC7110 prg+dat are merged)
- load *.zip and *.7z archives
- prompt for selection on multi-file archives
- generate manifest files based on heuristics
- apply BPS patches
The "Load" menu option has been renamed to "Library", to represent games
in your library. I'm going to add some sort of suffix to indicate
unverified games, and use a different folder icon for those (eg
manifests built on heuristics rather than from the database.)
So basically, to future end users:
File -> Load Game will be how they play games.
Library -> (specific system) can be thought of as an infinitely-sized
recent games list.
purify will likely become a simple stub that invokes ananke's functions.
No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
|
|
|
mapping.reset();
|
|
|
|
parse_markup_cartridge(cartridge);
|
|
|
|
parse_markup_icd2(cartridge["icd2"]);
|
|
|
|
parse_markup_bsx(cartridge["bsx"]);
|
2013-01-23 08:28:35 +00:00
|
|
|
parse_markup_satellaview(cartridge["satellaview"]);
|
|
|
|
parse_markup_sufamiturbo(cartridge["sufamiturbo[0]"], 0);
|
|
|
|
parse_markup_sufamiturbo(cartridge["sufamiturbo[1]"], 1);
|
Update to v091r11 release.
byuu says:
This release refines HSU1 support as a bidirectional protocol, nests SFC
manifests as "release/cartridge" and "release/information" (but release/
is not guaranteed to be finalized just yet), removes the database
integration, and adds support for ananke.
ananke represents inevitability. It's a library that, when installed,
higan can use to load files from the command-line, and also from a new
File -> Load Game menu option.
I need to change the build rules a bit for it to work on Windows (need
to make phoenix a DLL, basically), but it works now on Linux.
Right now, it only takes *.sfc file names, looks them up in the included
database, converts them to game folders, and returns the game folder
path for higan to load.
The idea is to continue expanding it to support everything we can that
I don't want in the higan core:
- load *.sfc, *.smc, *.swc, *.fig files
- remove SNES copier headers
- split apart merged firmware files
- pull in external firmware files (eg dsp1b.rom - these are staying
merged, just as SPC7110 prg+dat are merged)
- load *.zip and *.7z archives
- prompt for selection on multi-file archives
- generate manifest files based on heuristics
- apply BPS patches
The "Load" menu option has been renamed to "Library", to represent games
in your library. I'm going to add some sort of suffix to indicate
unverified games, and use a different folder icon for those (eg
manifests built on heuristics rather than from the database.)
So basically, to future end users:
File -> Load Game will be how they play games.
Library -> (specific system) can be thought of as an infinitely-sized
recent games list.
purify will likely become a simple stub that invokes ananke's functions.
No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
|
|
|
parse_markup_nss(cartridge["nss"]);
|
|
|
|
parse_markup_event(cartridge["event"]);
|
|
|
|
parse_markup_sa1(cartridge["sa1"]);
|
|
|
|
parse_markup_superfx(cartridge["superfx"]);
|
|
|
|
parse_markup_armdsp(cartridge["armdsp"]);
|
2012-11-22 10:28:01 +00:00
|
|
|
parse_markup_hitachidsp(cartridge["hitachidsp"], cartridge["board/type"].data.wildcard("2DC*") ? 2 : 1);
|
Update to v091r11 release.
byuu says:
This release refines HSU1 support as a bidirectional protocol, nests SFC
manifests as "release/cartridge" and "release/information" (but release/
is not guaranteed to be finalized just yet), removes the database
integration, and adds support for ananke.
ananke represents inevitability. It's a library that, when installed,
higan can use to load files from the command-line, and also from a new
File -> Load Game menu option.
I need to change the build rules a bit for it to work on Windows (need
to make phoenix a DLL, basically), but it works now on Linux.
Right now, it only takes *.sfc file names, looks them up in the included
database, converts them to game folders, and returns the game folder
path for higan to load.
The idea is to continue expanding it to support everything we can that
I don't want in the higan core:
- load *.sfc, *.smc, *.swc, *.fig files
- remove SNES copier headers
- split apart merged firmware files
- pull in external firmware files (eg dsp1b.rom - these are staying
merged, just as SPC7110 prg+dat are merged)
- load *.zip and *.7z archives
- prompt for selection on multi-file archives
- generate manifest files based on heuristics
- apply BPS patches
The "Load" menu option has been renamed to "Library", to represent games
in your library. I'm going to add some sort of suffix to indicate
unverified games, and use a different folder icon for those (eg
manifests built on heuristics rather than from the database.)
So basically, to future end users:
File -> Load Game will be how they play games.
Library -> (specific system) can be thought of as an infinitely-sized
recent games list.
purify will likely become a simple stub that invokes ananke's functions.
No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
|
|
|
parse_markup_necdsp(cartridge["necdsp"]);
|
|
|
|
parse_markup_epsonrtc(cartridge["epsonrtc"]);
|
|
|
|
parse_markup_sharprtc(cartridge["sharprtc"]);
|
|
|
|
parse_markup_spc7110(cartridge["spc7110"]);
|
|
|
|
parse_markup_sdd1(cartridge["sdd1"]);
|
|
|
|
parse_markup_obc1(cartridge["obc1"]);
|
|
|
|
parse_markup_hsu1(cartridge["hsu1"]);
|
|
|
|
parse_markup_msu1(cartridge["msu1"]);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
void Cartridge::parse_markup_map(Mapping& m, Markup::Node map) {
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
m.addr = map["address"].data;
|
2012-01-26 06:50:09 +00:00
|
|
|
m.size = numeral(map["size"].data);
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
m.base = numeral(map["base"].data);
|
|
|
|
m.mask = numeral(map["mask"].data);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
void Cartridge::parse_markup_memory(MappedRAM& ram, Markup::Node node, unsigned id, bool writable) {
|
2012-05-26 08:18:42 +00:00
|
|
|
string name = node["name"].data;
|
|
|
|
unsigned size = numeral(node["size"].data);
|
|
|
|
ram.map(allocate<uint8>(size, 0xff), size);
|
|
|
|
if(name.empty() == false) {
|
|
|
|
interface->loadRequest(id, name);
|
|
|
|
if(writable) memory.append({id, name});
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
//
|
|
|
|
|
Update to v091r11 release.
byuu says:
This release refines HSU1 support as a bidirectional protocol, nests SFC
manifests as "release/cartridge" and "release/information" (but release/
is not guaranteed to be finalized just yet), removes the database
integration, and adds support for ananke.
ananke represents inevitability. It's a library that, when installed,
higan can use to load files from the command-line, and also from a new
File -> Load Game menu option.
I need to change the build rules a bit for it to work on Windows (need
to make phoenix a DLL, basically), but it works now on Linux.
Right now, it only takes *.sfc file names, looks them up in the included
database, converts them to game folders, and returns the game folder
path for higan to load.
The idea is to continue expanding it to support everything we can that
I don't want in the higan core:
- load *.sfc, *.smc, *.swc, *.fig files
- remove SNES copier headers
- split apart merged firmware files
- pull in external firmware files (eg dsp1b.rom - these are staying
merged, just as SPC7110 prg+dat are merged)
- load *.zip and *.7z archives
- prompt for selection on multi-file archives
- generate manifest files based on heuristics
- apply BPS patches
The "Load" menu option has been renamed to "Library", to represent games
in your library. I'm going to add some sort of suffix to indicate
unverified games, and use a different folder icon for those (eg
manifests built on heuristics rather than from the database.)
So basically, to future end users:
File -> Load Game will be how they play games.
Library -> (specific system) can be thought of as an infinitely-sized
recent games list.
purify will likely become a simple stub that invokes ananke's functions.
No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
|
|
|
void Cartridge::parse_markup_cartridge(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
parse_markup_memory(rom, root["rom"], ID::ROM, false);
|
|
|
|
parse_markup_memory(ram, root["ram"], ID::RAM, true);
|
2012-05-26 08:18:42 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
|
|
|
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
Mapping m(rom);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = rom.size();
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-05-26 08:18:42 +00:00
|
|
|
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
if(node["id"].data == "ram") {
|
|
|
|
Mapping m(ram);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = ram.size();
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_icd2(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
Update to v088r11 release.
byuu says:
Changelog:
- phoenix has added Window::setModal(bool modal = true);
- file dialog is now modal. This allows emulation cores to request data
and get it immediately before continuing the loading process
- save data is hooked up for most systems, still need to handle
subsystem slot saves (Sufami Turbo, basically.)
- toggle fullscreen key binding added (Alt+Enter for now. I think F11 is
probably better though, Enter is often mapped to game start button.)
- video scaling is in (center, scale, stretch), works the same in
windowed and fullscreen mode (stretch hides resize window option), all
in the settings menu now
- enough structure to map all saved paths for the browser and to load
BS-X slotted carts, BS-X carts, single Sufami Turbo carts
Caveats / Missing:
- Super Game Boy input doesn't work yet (due to change in callback
binding)
- doesn't load secondary Sufami Turbo slot yet
- BS-X BIOS isn't show the data pack games to load for some reason (ugh,
I hate the shit out of debugging BS-X stuff ...)
- need mute audio, sync audio+video toggle, save/load state menu and
quick keys, XML mapping information window
- need cheat editor and cheat database
- need state manager
- need to sort subsystems below main systems in load menu (basically
just see if media.slot.size() > 0)
- need video shaders (will probably leave off filters for the time being
... due to that 24/30-bit thing)
- need video adjustments (contrast etc, overscan masks)
- need audio adjustments (frequency, latency, resampler, volume,
per-system frequency)
- need driver selection and input focus policy (driver crash detection
would be nice too)
- need NSS DIP switch settings (that one will be really fun)
- need to save and load window geometry settings
- need to hook up controller selection (won't be fun), create a map to
hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
|
|
|
has_gb_slot = true;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
icd2.revision = max(1, numeral(root["revision"].data));
|
Update to v088r11 release.
byuu says:
Changelog:
- phoenix has added Window::setModal(bool modal = true);
- file dialog is now modal. This allows emulation cores to request data
and get it immediately before continuing the loading process
- save data is hooked up for most systems, still need to handle
subsystem slot saves (Sufami Turbo, basically.)
- toggle fullscreen key binding added (Alt+Enter for now. I think F11 is
probably better though, Enter is often mapped to game start button.)
- video scaling is in (center, scale, stretch), works the same in
windowed and fullscreen mode (stretch hides resize window option), all
in the settings menu now
- enough structure to map all saved paths for the browser and to load
BS-X slotted carts, BS-X carts, single Sufami Turbo carts
Caveats / Missing:
- Super Game Boy input doesn't work yet (due to change in callback
binding)
- doesn't load secondary Sufami Turbo slot yet
- BS-X BIOS isn't show the data pack games to load for some reason (ugh,
I hate the shit out of debugging BS-X stuff ...)
- need mute audio, sync audio+video toggle, save/load state menu and
quick keys, XML mapping information window
- need cheat editor and cheat database
- need state manager
- need to sort subsystems below main systems in load menu (basically
just see if media.slot.size() > 0)
- need video shaders (will probably leave off filters for the time being
... due to that 24/30-bit thing)
- need video adjustments (contrast etc, overscan masks)
- need audio adjustments (frequency, latency, resampler, volume,
per-system frequency)
- need driver selection and input focus policy (driver crash detection
would be nice too)
- need NSS DIP switch settings (that one will be really fun)
- need to save and load window geometry settings
- need to hook up controller selection (won't be fun), create a map to
hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
|
|
|
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
interface->loadRequest(ID::SuperGameBoy, "Game Boy", "gb");
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
string bootROMName = root["rom"]["name"].data;
|
|
|
|
interface->loadRequest(ID::SuperGameBoyBootROM, bootROMName);
|
2012-07-15 09:47:35 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&ICD2::read, &icd2}, {&ICD2::write, &icd2});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_bsx(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
has_bs_cart = true;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_bs_slot = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
interface->loadRequest(ID::Satellaview, "BS-X Satellaview", "bs");
|
2012-05-22 12:10:00 +00:00
|
|
|
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
parse_markup_memory(bsxcartridge.rom, root["rom"], ID::BsxROM, false);
|
|
|
|
parse_markup_memory(bsxcartridge.ram, root["ram"], ID::BsxRAM, true);
|
|
|
|
parse_markup_memory(bsxcartridge.psram, root["psram"], ID::BsxPSRAM, true);
|
2012-07-09 11:40:23 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-05-22 12:10:00 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
if(node["id"].data == "rom"
|
|
|
|
|| node["id"].data == "ram") {
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
Mapping m({&BSXCartridge::mcu_read, &bsxcartridge}, {&BSXCartridge::mcu_write, &bsxcartridge});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&BSXCartridge::mmio_read, &bsxcartridge}, {&BSXCartridge::mmio_write, &bsxcartridge});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-05-22 12:10:00 +00:00
|
|
|
}
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
}
|
|
|
|
|
2013-01-23 08:28:35 +00:00
|
|
|
void Cartridge::parse_markup_satellaview(Markup::Node root) {
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_bs_slot = true;
|
|
|
|
|
|
|
|
interface->loadRequest(ID::Satellaview, "BS-X Satellaview", "bs");
|
2012-05-22 12:10:00 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root.find("map")) {
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
if(node["id"].data == "rom") {
|
2013-01-21 12:27:15 +00:00
|
|
|
if(satellaviewcartridge.memory.size() == 0) continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
2013-01-21 12:27:15 +00:00
|
|
|
Mapping m(satellaviewcartridge);
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-05-22 12:10:00 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-01-23 08:28:35 +00:00
|
|
|
void Cartridge::parse_markup_sufamiturbo(Markup::Node root, bool slot) {
|
2012-05-22 12:10:00 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_st_slots = true;
|
|
|
|
|
2013-01-23 08:28:35 +00:00
|
|
|
if(slot == 0) {
|
|
|
|
//load required slot A (will request slot B if slot A cartridge is linkable)
|
|
|
|
interface->loadRequest(ID::SufamiTurboSlotA, "Sufami Turbo - Slot A", "st");
|
|
|
|
}
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root.find("map")) {
|
2013-01-23 08:28:35 +00:00
|
|
|
SufamiTurboCartridge &cart = (slot == 0 ? sufamiturboA : sufamiturboB);
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
2013-01-23 08:28:35 +00:00
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
if(cart.rom.size() == 0) continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
2013-01-23 08:28:35 +00:00
|
|
|
Mapping m(cart.rom);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = cart.rom.size();
|
|
|
|
if(m.size) mapping.append(m);
|
|
|
|
}
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
2013-01-23 08:28:35 +00:00
|
|
|
if(node["id"].data == "ram") {
|
|
|
|
if(cart.ram.size() == 0) continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
2013-01-23 08:28:35 +00:00
|
|
|
Mapping m(cart.ram);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = cart.ram.size();
|
|
|
|
if(m.size) mapping.append(m);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_nss(Markup::Node root) {
|
2012-05-22 12:10:00 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_nss_dip = true;
|
|
|
|
nss.dip = interface->dipSettings(root);
|
2012-07-08 02:57:34 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-07-08 02:57:34 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&NSS::read, &nss}, {&NSS::write, &nss});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-07-08 02:57:34 +00:00
|
|
|
}
|
2012-05-22 12:10:00 +00:00
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_event(Markup::Node root) {
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_event = true;
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
if(node.name != "rom") continue;
|
|
|
|
unsigned id = numeral(node["id"].data);
|
|
|
|
if(id > 3) continue;
|
|
|
|
parse_markup_memory(event.rom[id], node, ID::EventROM0 + id, false);
|
|
|
|
}
|
|
|
|
parse_markup_memory(event.ram, root["ram"], ID::EventRAM, true);
|
|
|
|
|
|
|
|
event.board = Event::Board::CampusChallenge92;
|
|
|
|
if(root["name"].data == "Campus Challenge '92") event.board = Event::Board::CampusChallenge92;
|
|
|
|
if(root["name"].data == "Powerfest '94") event.board = Event::Board::Powerfest94;
|
|
|
|
|
|
|
|
event.revision = root["revision"].data == "B" ? 2 : 1;
|
|
|
|
lstring part = root["timer"].data.split<1>(":");
|
|
|
|
if(part.size() == 1) event.timer = decimal(part(0));
|
|
|
|
if(part.size() == 2) event.timer = decimal(part(0)) * 60 + decimal(part(1));
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
if(node.name != "map") continue;
|
|
|
|
|
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
Mapping m({&Event::rom_read, &event}, [](unsigned, uint8) {});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "ram") {
|
|
|
|
Mapping m({&Event::ram_read, &event}, {&Event::ram_write, &event});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "dr") {
|
|
|
|
Mapping m([](unsigned) -> uint8 { return cpu.regs.mdr; }, {&Event::dr, &event});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "sr") {
|
|
|
|
Mapping m({&Event::sr, &event}, [](unsigned, uint8) {});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_sa1(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_sa1 = true;
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(sa1.rom, root["rom"], ID::SA1ROM, false);
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
parse_markup_memory(sa1.bwram, root["ram[0]"], ID::SA1BWRAM, true);
|
|
|
|
parse_markup_memory(sa1.iram, root["ram[1]"], ID::SA1IRAM, true);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&SA1::mmio_read, &sa1}, {&SA1::mmio_write, &sa1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
Mapping m({&SA1::mmcrom_read, &sa1}, {&SA1::mmcrom_write, &sa1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
if(node["id"].data == "bwram") {
|
|
|
|
Mapping m({&SA1::mmcbwram_read, &sa1}, {&SA1::mmcbwram_write, &sa1});
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
if(node["id"].data == "iram") {
|
|
|
|
Mapping m(sa1.cpuiram);
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
parse_markup_map(m, node);
|
2012-10-22 22:45:18 +00:00
|
|
|
if(m.size == 0) m.size = sa1.cpuiram.size();
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_superfx(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_superfx = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(superfx.rom, root["rom"], ID::SuperFXROM, false);
|
|
|
|
parse_markup_memory(superfx.ram, root["ram"], ID::SuperFXRAM, true);
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-07-09 11:40:23 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&SuperFX::mmio_read, &superfx}, {&SuperFX::mmio_write, &superfx});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
Mapping m(superfx.cpurom);
|
|
|
|
parse_markup_map(m, node);
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
if(m.size == 0) m.size = superfx.rom.size();
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "ram") {
|
|
|
|
Mapping m(superfx.cpuram);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = superfx.ram.size();
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_armdsp(Markup::Node root) {
|
2012-05-22 12:10:00 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_armdsp = true;
|
|
|
|
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
string programROMName = root["rom[0]/name"].data;
|
|
|
|
string dataROMName = root["rom[1]/name"].data;
|
|
|
|
string dataRAMName = root["ram/name"].data;
|
2012-05-22 12:10:00 +00:00
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
interface->loadRequest(ID::ArmDSPPROM, programROMName);
|
|
|
|
interface->loadRequest(ID::ArmDSPDROM, dataROMName);
|
|
|
|
if(dataRAMName.empty() == false) {
|
|
|
|
interface->loadRequest(ID::ArmDSPRAM, dataRAMName);
|
|
|
|
memory.append({ID::ArmDSPRAM, dataRAMName});
|
|
|
|
}
|
2012-05-22 12:10:00 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-05-22 12:10:00 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&ArmDSP::mmio_read, &armdsp}, {&ArmDSP::mmio_write, &armdsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-05-22 12:10:00 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-11-22 10:28:01 +00:00
|
|
|
void Cartridge::parse_markup_hitachidsp(Markup::Node root, unsigned roms) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_hitachidsp = true;
|
|
|
|
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
parse_markup_memory(hitachidsp.rom, root["rom[0]"], ID::HitachiDSPROM, false);
|
|
|
|
parse_markup_memory(hitachidsp.ram, root["ram[0]"], ID::HitachiDSPRAM, true);
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& word : hitachidsp.dataROM) word = 0x000000;
|
|
|
|
for(auto& word : hitachidsp.dataRAM) word = 0x00;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-11-22 10:28:01 +00:00
|
|
|
hitachidsp.Frequency = numeral(root["frequency"].data);
|
|
|
|
if(hitachidsp.Frequency == 0) hitachidsp.frequency = 20000000;
|
|
|
|
hitachidsp.Roms = roms;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
string dataROMName = root["rom[1]/name"].data;
|
|
|
|
string dataRAMName = root["ram[1]/name"].data;
|
2012-10-22 22:45:18 +00:00
|
|
|
|
|
|
|
interface->loadRequest(ID::HitachiDSPDROM, dataROMName);
|
|
|
|
if(dataRAMName.empty() == false) {
|
2012-11-22 10:28:01 +00:00
|
|
|
interface->loadRequest(ID::HitachiDSPDRAM, dataRAMName);
|
2012-10-22 22:45:18 +00:00
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-07-15 09:47:35 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&HitachiDSP::dsp_read, &hitachidsp}, {&HitachiDSP::dsp_write, &hitachidsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
Mapping m({&HitachiDSP::rom_read, &hitachidsp}, {&HitachiDSP::rom_write, &hitachidsp});
|
|
|
|
parse_markup_map(m, node);
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
if(m.size == 0) m.size = hitachidsp.rom.size();
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-11-22 10:28:01 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "ram") {
|
|
|
|
Mapping m({&HitachiDSP::ram_read, &hitachidsp}, {&HitachiDSP::ram_write, &hitachidsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = hitachidsp.ram.size();
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_necdsp(Markup::Node root) {
|
2012-02-26 07:59:44 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_necdsp = true;
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& word : necdsp.programROM) word = 0x000000;
|
|
|
|
for(auto& word : necdsp.dataROM) word = 0x0000;
|
|
|
|
for(auto& word : necdsp.dataRAM) word = 0x0000;
|
2012-02-26 07:59:44 +00:00
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
necdsp.frequency = numeral(root["frequency"].data);
|
|
|
|
if(necdsp.frequency == 0) necdsp.frequency = 8000000;
|
|
|
|
necdsp.revision
|
|
|
|
= root["model"].data == "uPD7725" ? NECDSP::Revision::uPD7725
|
|
|
|
: root["model"].data == "uPD96050" ? NECDSP::Revision::uPD96050
|
|
|
|
: NECDSP::Revision::uPD7725;
|
2012-10-22 22:45:18 +00:00
|
|
|
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
string programROMName = root["rom[0]/name"].data;
|
|
|
|
string dataROMName = root["rom[1]/name"].data;
|
|
|
|
string dataRAMName = root["ram/name"].data;
|
2012-02-26 07:59:44 +00:00
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
if(necdsp.revision == NECDSP::Revision::uPD7725) {
|
2012-10-22 22:45:18 +00:00
|
|
|
interface->loadRequest(ID::Nec7725DSPPROM, programROMName);
|
|
|
|
interface->loadRequest(ID::Nec7725DSPDROM, dataROMName);
|
|
|
|
if(dataRAMName.empty() == false) {
|
|
|
|
interface->loadRequest(ID::Nec7725DSPRAM, dataRAMName);
|
|
|
|
memory.append({ID::Nec7725DSPRAM, dataRAMName});
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
if(necdsp.revision == NECDSP::Revision::uPD96050) {
|
2012-10-22 22:45:18 +00:00
|
|
|
interface->loadRequest(ID::Nec96050DSPPROM, programROMName);
|
|
|
|
interface->loadRequest(ID::Nec96050DSPDROM, dataROMName);
|
|
|
|
if(dataRAMName.empty() == false) {
|
|
|
|
interface->loadRequest(ID::Nec96050DSPRAM, dataRAMName);
|
|
|
|
memory.append({ID::Nec96050DSPRAM, dataRAMName});
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
Update to v088r11 release.
byuu says:
Changelog:
- phoenix has added Window::setModal(bool modal = true);
- file dialog is now modal. This allows emulation cores to request data
and get it immediately before continuing the loading process
- save data is hooked up for most systems, still need to handle
subsystem slot saves (Sufami Turbo, basically.)
- toggle fullscreen key binding added (Alt+Enter for now. I think F11 is
probably better though, Enter is often mapped to game start button.)
- video scaling is in (center, scale, stretch), works the same in
windowed and fullscreen mode (stretch hides resize window option), all
in the settings menu now
- enough structure to map all saved paths for the browser and to load
BS-X slotted carts, BS-X carts, single Sufami Turbo carts
Caveats / Missing:
- Super Game Boy input doesn't work yet (due to change in callback
binding)
- doesn't load secondary Sufami Turbo slot yet
- BS-X BIOS isn't show the data pack games to load for some reason (ugh,
I hate the shit out of debugging BS-X stuff ...)
- need mute audio, sync audio+video toggle, save/load state menu and
quick keys, XML mapping information window
- need cheat editor and cheat database
- need state manager
- need to sort subsystems below main systems in load menu (basically
just see if media.slot.size() > 0)
- need video shaders (will probably leave off filters for the time being
... due to that 24/30-bit thing)
- need video adjustments (contrast etc, overscan masks)
- need audio adjustments (frequency, latency, resampler, volume,
per-system frequency)
- need driver selection and input focus policy (driver crash detection
would be nice too)
- need NSS DIP switch settings (that one will be really fun)
- need to save and load window geometry settings
- need to hook up controller selection (won't be fun), create a map to
hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-07-09 11:40:23 +00:00
|
|
|
if(node.name != "map") continue;
|
|
|
|
|
2012-11-22 10:28:01 +00:00
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&NECDSP::read, &necdsp}, {&NECDSP::write, &necdsp});
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
2012-11-22 10:28:01 +00:00
|
|
|
necdsp.Select = numeral(node["select"].data);
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "ram") {
|
2012-11-22 10:28:01 +00:00
|
|
|
Mapping m({&NECDSP::ram_read, &necdsp}, {&NECDSP::ram_write, &necdsp});
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_epsonrtc(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_epsonrtc = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-07-15 09:47:35 +00:00
|
|
|
string name = root["ram"]["name"].data;
|
2012-05-26 08:18:42 +00:00
|
|
|
interface->loadRequest(ID::EpsonRTC, name);
|
|
|
|
memory.append({ID::EpsonRTC, name});
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&EpsonRTC::read, &epsonrtc}, {&EpsonRTC::write, &epsonrtc});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_sharprtc(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_sharprtc = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-07-15 09:47:35 +00:00
|
|
|
string name = root["ram"]["name"].data;
|
2012-05-26 08:18:42 +00:00
|
|
|
interface->loadRequest(ID::SharpRTC, name);
|
|
|
|
memory.append({ID::SharpRTC, name});
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&SharpRTC::read, &sharprtc}, {&SharpRTC::write, &sharprtc});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_spc7110(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_spc7110 = true;
|
|
|
|
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
parse_markup_memory(spc7110.prom, root["rom[0]"], ID::SPC7110PROM, false);
|
|
|
|
parse_markup_memory(spc7110.drom, root["rom[1]"], ID::SPC7110DROM, false);
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(spc7110.ram, root["ram"], ID::SPC7110RAM, true);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&SPC7110::read, &spc7110}, {&SPC7110::write, &spc7110});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
Mapping m({&SPC7110::mcurom_read, &spc7110}, {&SPC7110::mcurom_write, &spc7110});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "ram") {
|
|
|
|
Mapping m({&SPC7110::mcuram_read, &spc7110}, {&SPC7110::mcuram_write, &spc7110});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_sdd1(Markup::Node root) {
|
2012-05-21 10:56:48 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_sdd1 = true;
|
2012-05-21 10:56:48 +00:00
|
|
|
|
2012-07-08 02:57:34 +00:00
|
|
|
parse_markup_memory(sdd1.rom, root["rom"], ID::SDD1ROM, false);
|
|
|
|
parse_markup_memory(sdd1.ram, root["ram"], ID::SDD1RAM, true);
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-07-08 02:57:34 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&SDD1::read, &sdd1}, {&SDD1::write, &sdd1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "rom") {
|
|
|
|
Mapping m({&SDD1::mcurom_read, &sdd1}, {&SDD1::mcurom_write, &sdd1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
if(node["id"].data == "ram") {
|
|
|
|
Mapping m({&SDD1::mcuram_read, &sdd1}, {&SDD1::mcuram_write, &sdd1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-07-08 02:57:34 +00:00
|
|
|
}
|
2012-05-21 10:56:48 +00:00
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_obc1(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_obc1 = true;
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(obc1.ram, root["ram"], ID::OBC1RAM, true);
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&OBC1::read, &obc1}, {&OBC1::write, &obc1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-11-02 10:37:38 +00:00
|
|
|
void Cartridge::parse_markup_hsu1(Markup::Node root) {
|
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_hsu1 = true;
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
2012-11-02 10:37:38 +00:00
|
|
|
if(node.name != "map") continue;
|
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&HSU1::read, &hsu1}, {&HSU1::write, &hsu1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-10-22 22:45:18 +00:00
|
|
|
void Cartridge::parse_markup_msu1(Markup::Node root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-29 12:20:46 +00:00
|
|
|
has_msu1 = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
Update to v089r17 release.
byuu says:
This implements the spec from the XML part 3 thread:
http://board.byuu.org/viewtopic.php?f=16&t=2998
It's also propagated the changes to nall and purify, so you can test
this one.
This is basically it, after years of effort I feel I finally have
a fully consistent and logical XML board format.
The only things left to change will be: modifications if emulation turns
out to be incorrect (eg we missed some MMIO mirrors, or mirrored too
much), and new additions.
And of course, I'm giving it a bit of time for good arguments against
the format.
Other than that, this release removes linear_vector and pointer_vector,
as vector is better than linear_vector and I've never used
pointer_vector.
vector also gets move(), which is a way to use move-semantics across
types. It lets you steal the underlying memory pool, effectively
destroying the vector without a copy.
This works really nicely with the move for read() functions to return
vector<uint8> instead of taking (uint8_t*&, unsigned&) parameters.
2012-07-15 13:02:27 +00:00
|
|
|
|
|
|
|
if(node["id"].data == "io") {
|
|
|
|
Mapping m({&MSU1::mmio_read, &msu1}, {&MSU1::mmio_write, &msu1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
Cartridge::Mapping::Mapping() {
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
size = base = mask = 0;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
Cartridge::Mapping::Mapping(SuperFamicom::Memory& memory) {
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
reader = {&SuperFamicom::Memory::read, &memory};
|
|
|
|
writer = {&SuperFamicom::Memory::write, &memory};
|
|
|
|
size = base = mask = 0;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
|
2013-05-05 09:21:30 +00:00
|
|
|
Cartridge::Mapping::Mapping(const function<uint8 (unsigned)>& reader, const function<void (unsigned, uint8)>& writer) {
|
Update to v091r05 release.
[No prior releases were posted to the WIP thread. -Ed.]
byuu says:
Super Famicom mapping system has been reworked as discussed with the
mask= changes. offset becomes base, mode is gone. Also added support for
comma-separated fields in the address fields, to reduce the number of
map lines needed.
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<superfx revision="2">
<rom name="program.rom" size="0x200000"/>
<ram name="save.rwm" size="0x8000"/>
<map id="io" address="00-3f,80-bf:3000-32ff"/>
<map id="rom" address="00-3f:8000-ffff" mask="0x8000"/>
<map id="rom" address="40-5f:0000-ffff"/>
<map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/>
<map id="ram" address="70-71:0000-ffff"/>
</superfx>
</cartridge>
Or in BML:
cartridge region=NTSC
superfx revision=2
rom name=program.rom size=0x200000
ram name=save.rwm size=0x8000
map id=io address=00-3f,80-bf:3000-32ff
map id=rom address=00-3f:8000-ffff mask=0x8000
map id=rom address=40-5f:0000-ffff
map id=ram address=00-3f,80-bf:6000-7fff size=0x2000
map id=ram address=70-71:0000-ffff
As a result of the changes, old mappings will no longer work. The above
XML example will run Super Mario World 2: Yoshi's Island. Otherwise,
you'll have to write your own.
All that's left now is to work some sort of database mapping system in,
so I can start dumping carts en masse.
The NES changes that FitzRoy asked for are mostly in as well.
Also, part of the reason I haven't released a WIP ... but fuck it, I'm
not going to wait forever to post a new WIP.
I've added a skeleton driver to emulate Campus Challenge '92 and
Powerfest '94. There's no actual emulation, except for the stuff I can
glean from looking at the pictures of the board. It has a DSP-1 (so
SR/DR registers), four ROMs that map in and out, RAM, etc.
I've also added preliminary mapping to upload high scores to a website,
but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
|
|
|
this->reader = reader;
|
|
|
|
this->writer = writer;
|
|
|
|
size = base = mask = 0;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|