bsnes/higan/sfc/cartridge/markup.cpp

605 lines
18 KiB
C++
Raw Normal View History

Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
#ifdef CARTRIDGE_CPP
void Cartridge::parse_markup(const char *markup) {
Update to higan v091r14 and ananke v00r03 releases. byuu says: higan changelog: - generates title displayed in emulator window by asking the core - core builds title solely from "information/title" ... if it's not there, you don't get a title at all - sub-system load menu is gone ... since there are multiple revisions of the SGB, this never really worked well anyway - to load an SGB, BS-X or ST cartridge, load the base cartridge first - "File->Load Game" moved to "Load->Import Game" ... may cause a bit of confusion to new users, but I don't like having a single-item menu, we'll just have to explain it to new users - browser window redone to look like ananke - home button here goes to ~/Emulation rather than just ~ like ananke, since this is the home of game folders - game folder icon is now the executable icon for the Tango theme (orange diamond), meant to represent a complete game rather than a game file or archive ananke changelog: - outputs GBC games to "Game Boy Color/" instead of "Game Boy/" - adds the file basename to "information/title" Known issues: - using ananke to load a GB game trips the Super Famicom SGB mode and fails (need to make the full-path auto-detection ignore non-bootable systems) - need to dump and test some BS-X media before releasing - ananke lacks BS-X Satellaview cartridge support - v092 isn't going to let you retarget the ananke/higan game folder path of ~/Emulation, you will have to wait for a future version if that bothers you so greatly [Later, after the v092 release, byuu posted this additional changelog: - kill laevateinn - add title() - add bootable, remove load - combine file, library - combine [][][] paths - fix SFC subtype handling XML->BML - update file browser to use buttons - update file browser keyboard handling - update system XML->BML - fix sufami turbo hashing - remove Cartridge::manifest ]
2012-12-25 05:31:55 +00:00
auto document = Markup::Document(markup);
2013-01-14 12:10:20 +00:00
information.title.cartridge = document["information/title"].text();
Update to higan v091r14 and ananke v00r03 releases. byuu says: higan changelog: - generates title displayed in emulator window by asking the core - core builds title solely from "information/title" ... if it's not there, you don't get a title at all - sub-system load menu is gone ... since there are multiple revisions of the SGB, this never really worked well anyway - to load an SGB, BS-X or ST cartridge, load the base cartridge first - "File->Load Game" moved to "Load->Import Game" ... may cause a bit of confusion to new users, but I don't like having a single-item menu, we'll just have to explain it to new users - browser window redone to look like ananke - home button here goes to ~/Emulation rather than just ~ like ananke, since this is the home of game folders - game folder icon is now the executable icon for the Tango theme (orange diamond), meant to represent a complete game rather than a game file or archive ananke changelog: - outputs GBC games to "Game Boy Color/" instead of "Game Boy/" - adds the file basename to "information/title" Known issues: - using ananke to load a GB game trips the Super Famicom SGB mode and fails (need to make the full-path auto-detection ignore non-bootable systems) - need to dump and test some BS-X media before releasing - ananke lacks BS-X Satellaview cartridge support - v092 isn't going to let you retarget the ananke/higan game folder path of ~/Emulation, you will have to wait for a future version if that bothers you so greatly [Later, after the v092 release, byuu posted this additional changelog: - kill laevateinn - add title() - add bootable, remove load - combine file, library - combine [][][] paths - fix SFC subtype handling XML->BML - update file browser to use buttons - update file browser keyboard handling - update system XML->BML - fix sufami turbo hashing - remove Cartridge::manifest ]
2012-12-25 05:31:55 +00:00
auto cartridge = document["cartridge"];
region = cartridge["region"].data != "PAL" ? Region::NTSC : Region::PAL;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
Update to v091r11 release. byuu says: This release refines HSU1 support as a bidirectional protocol, nests SFC manifests as "release/cartridge" and "release/information" (but release/ is not guaranteed to be finalized just yet), removes the database integration, and adds support for ananke. ananke represents inevitability. It's a library that, when installed, higan can use to load files from the command-line, and also from a new File -> Load Game menu option. I need to change the build rules a bit for it to work on Windows (need to make phoenix a DLL, basically), but it works now on Linux. Right now, it only takes *.sfc file names, looks them up in the included database, converts them to game folders, and returns the game folder path for higan to load. The idea is to continue expanding it to support everything we can that I don't want in the higan core: - load *.sfc, *.smc, *.swc, *.fig files - remove SNES copier headers - split apart merged firmware files - pull in external firmware files (eg dsp1b.rom - these are staying merged, just as SPC7110 prg+dat are merged) - load *.zip and *.7z archives - prompt for selection on multi-file archives - generate manifest files based on heuristics - apply BPS patches The "Load" menu option has been renamed to "Library", to represent games in your library. I'm going to add some sort of suffix to indicate unverified games, and use a different folder icon for those (eg manifests built on heuristics rather than from the database.) So basically, to future end users: File -> Load Game will be how they play games. Library -> (specific system) can be thought of as an infinitely-sized recent games list. purify will likely become a simple stub that invokes ananke's functions. No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
mapping.reset();
parse_markup_cartridge(cartridge);
parse_markup_icd2(cartridge["icd2"]);
parse_markup_bsx(cartridge["bsx"]);
parse_markup_satellaview(cartridge["satellaview"]);
parse_markup_sufamiturbo(cartridge["sufamiturbo[0]"], 0);
parse_markup_sufamiturbo(cartridge["sufamiturbo[1]"], 1);
Update to v091r11 release. byuu says: This release refines HSU1 support as a bidirectional protocol, nests SFC manifests as "release/cartridge" and "release/information" (but release/ is not guaranteed to be finalized just yet), removes the database integration, and adds support for ananke. ananke represents inevitability. It's a library that, when installed, higan can use to load files from the command-line, and also from a new File -> Load Game menu option. I need to change the build rules a bit for it to work on Windows (need to make phoenix a DLL, basically), but it works now on Linux. Right now, it only takes *.sfc file names, looks them up in the included database, converts them to game folders, and returns the game folder path for higan to load. The idea is to continue expanding it to support everything we can that I don't want in the higan core: - load *.sfc, *.smc, *.swc, *.fig files - remove SNES copier headers - split apart merged firmware files - pull in external firmware files (eg dsp1b.rom - these are staying merged, just as SPC7110 prg+dat are merged) - load *.zip and *.7z archives - prompt for selection on multi-file archives - generate manifest files based on heuristics - apply BPS patches The "Load" menu option has been renamed to "Library", to represent games in your library. I'm going to add some sort of suffix to indicate unverified games, and use a different folder icon for those (eg manifests built on heuristics rather than from the database.) So basically, to future end users: File -> Load Game will be how they play games. Library -> (specific system) can be thought of as an infinitely-sized recent games list. purify will likely become a simple stub that invokes ananke's functions. No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
parse_markup_nss(cartridge["nss"]);
parse_markup_event(cartridge["event"]);
parse_markup_sa1(cartridge["sa1"]);
parse_markup_superfx(cartridge["superfx"]);
parse_markup_armdsp(cartridge["armdsp"]);
parse_markup_hitachidsp(cartridge["hitachidsp"], cartridge["board/type"].data.wildcard("2DC*") ? 2 : 1);
Update to v091r11 release. byuu says: This release refines HSU1 support as a bidirectional protocol, nests SFC manifests as "release/cartridge" and "release/information" (but release/ is not guaranteed to be finalized just yet), removes the database integration, and adds support for ananke. ananke represents inevitability. It's a library that, when installed, higan can use to load files from the command-line, and also from a new File -> Load Game menu option. I need to change the build rules a bit for it to work on Windows (need to make phoenix a DLL, basically), but it works now on Linux. Right now, it only takes *.sfc file names, looks them up in the included database, converts them to game folders, and returns the game folder path for higan to load. The idea is to continue expanding it to support everything we can that I don't want in the higan core: - load *.sfc, *.smc, *.swc, *.fig files - remove SNES copier headers - split apart merged firmware files - pull in external firmware files (eg dsp1b.rom - these are staying merged, just as SPC7110 prg+dat are merged) - load *.zip and *.7z archives - prompt for selection on multi-file archives - generate manifest files based on heuristics - apply BPS patches The "Load" menu option has been renamed to "Library", to represent games in your library. I'm going to add some sort of suffix to indicate unverified games, and use a different folder icon for those (eg manifests built on heuristics rather than from the database.) So basically, to future end users: File -> Load Game will be how they play games. Library -> (specific system) can be thought of as an infinitely-sized recent games list. purify will likely become a simple stub that invokes ananke's functions. No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
parse_markup_necdsp(cartridge["necdsp"]);
parse_markup_epsonrtc(cartridge["epsonrtc"]);
parse_markup_sharprtc(cartridge["sharprtc"]);
parse_markup_spc7110(cartridge["spc7110"]);
parse_markup_sdd1(cartridge["sdd1"]);
parse_markup_obc1(cartridge["obc1"]);
parse_markup_hsu1(cartridge["hsu1"]);
parse_markup_msu1(cartridge["msu1"]);
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
//
void Cartridge::parse_markup_map(Mapping &m, Markup::Node map) {
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
m.addr = map["address"].data;
m.size = numeral(map["size"].data);
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
m.base = numeral(map["base"].data);
m.mask = numeral(map["mask"].data);
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
void Cartridge::parse_markup_memory(MappedRAM &ram, Markup::Node node, unsigned id, bool writable) {
string name = node["name"].data;
unsigned size = numeral(node["size"].data);
ram.map(allocate<uint8>(size, 0xff), size);
if(name.empty() == false) {
interface->loadRequest(id, name);
if(writable) memory.append({id, name});
}
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
//
Update to v091r11 release. byuu says: This release refines HSU1 support as a bidirectional protocol, nests SFC manifests as "release/cartridge" and "release/information" (but release/ is not guaranteed to be finalized just yet), removes the database integration, and adds support for ananke. ananke represents inevitability. It's a library that, when installed, higan can use to load files from the command-line, and also from a new File -> Load Game menu option. I need to change the build rules a bit for it to work on Windows (need to make phoenix a DLL, basically), but it works now on Linux. Right now, it only takes *.sfc file names, looks them up in the included database, converts them to game folders, and returns the game folder path for higan to load. The idea is to continue expanding it to support everything we can that I don't want in the higan core: - load *.sfc, *.smc, *.swc, *.fig files - remove SNES copier headers - split apart merged firmware files - pull in external firmware files (eg dsp1b.rom - these are staying merged, just as SPC7110 prg+dat are merged) - load *.zip and *.7z archives - prompt for selection on multi-file archives - generate manifest files based on heuristics - apply BPS patches The "Load" menu option has been renamed to "Library", to represent games in your library. I'm going to add some sort of suffix to indicate unverified games, and use a different folder icon for those (eg manifests built on heuristics rather than from the database.) So basically, to future end users: File -> Load Game will be how they play games. Library -> (specific system) can be thought of as an infinitely-sized recent games list. purify will likely become a simple stub that invokes ananke's functions. No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
void Cartridge::parse_markup_cartridge(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
parse_markup_memory(rom, root["rom"], ID::ROM, false);
parse_markup_memory(ram, root["ram"], ID::RAM, true);
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "rom") {
Mapping m(rom);
parse_markup_map(m, node);
if(m.size == 0) m.size = rom.size();
mapping.append(m);
}
if(node["id"].data == "ram") {
Mapping m(ram);
parse_markup_map(m, node);
if(m.size == 0) m.size = ram.size();
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_icd2(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
Update to v088r11 release. byuu says: Changelog: - phoenix has added Window::setModal(bool modal = true); - file dialog is now modal. This allows emulation cores to request data and get it immediately before continuing the loading process - save data is hooked up for most systems, still need to handle subsystem slot saves (Sufami Turbo, basically.) - toggle fullscreen key binding added (Alt+Enter for now. I think F11 is probably better though, Enter is often mapped to game start button.) - video scaling is in (center, scale, stretch), works the same in windowed and fullscreen mode (stretch hides resize window option), all in the settings menu now - enough structure to map all saved paths for the browser and to load BS-X slotted carts, BS-X carts, single Sufami Turbo carts Caveats / Missing: - Super Game Boy input doesn't work yet (due to change in callback binding) - doesn't load secondary Sufami Turbo slot yet - BS-X BIOS isn't show the data pack games to load for some reason (ugh, I hate the shit out of debugging BS-X stuff ...) - need mute audio, sync audio+video toggle, save/load state menu and quick keys, XML mapping information window - need cheat editor and cheat database - need state manager - need to sort subsystems below main systems in load menu (basically just see if media.slot.size() > 0) - need video shaders (will probably leave off filters for the time being ... due to that 24/30-bit thing) - need video adjustments (contrast etc, overscan masks) - need audio adjustments (frequency, latency, resampler, volume, per-system frequency) - need driver selection and input focus policy (driver crash detection would be nice too) - need NSS DIP switch settings (that one will be really fun) - need to save and load window geometry settings - need to hook up controller selection (won't be fun), create a map to hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
has_gb_slot = true;
icd2.revision = max(1, numeral(root["revision"].data));
Update to v088r11 release. byuu says: Changelog: - phoenix has added Window::setModal(bool modal = true); - file dialog is now modal. This allows emulation cores to request data and get it immediately before continuing the loading process - save data is hooked up for most systems, still need to handle subsystem slot saves (Sufami Turbo, basically.) - toggle fullscreen key binding added (Alt+Enter for now. I think F11 is probably better though, Enter is often mapped to game start button.) - video scaling is in (center, scale, stretch), works the same in windowed and fullscreen mode (stretch hides resize window option), all in the settings menu now - enough structure to map all saved paths for the browser and to load BS-X slotted carts, BS-X carts, single Sufami Turbo carts Caveats / Missing: - Super Game Boy input doesn't work yet (due to change in callback binding) - doesn't load secondary Sufami Turbo slot yet - BS-X BIOS isn't show the data pack games to load for some reason (ugh, I hate the shit out of debugging BS-X stuff ...) - need mute audio, sync audio+video toggle, save/load state menu and quick keys, XML mapping information window - need cheat editor and cheat database - need state manager - need to sort subsystems below main systems in load menu (basically just see if media.slot.size() > 0) - need video shaders (will probably leave off filters for the time being ... due to that 24/30-bit thing) - need video adjustments (contrast etc, overscan masks) - need audio adjustments (frequency, latency, resampler, volume, per-system frequency) - need driver selection and input focus policy (driver crash detection would be nice too) - need NSS DIP switch settings (that one will be really fun) - need to save and load window geometry settings - need to hook up controller selection (won't be fun), create a map to hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
Update to v089r08 release. byuu says: Changelog: - Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load manifests that specify their file names, and they all work - Sufami Turbo can now properly handle carts without RAM, or empty slots entirely - Emulator::Interface structures no longer specify any file names, ever - exposed "capability.(cheats,states)" now. So far, this just means the GBA doesn't show the cheat editor, since it doesn't support cheat codes yet - as such, state manager and cheat editor windows auto-hide (may be a tiny bit inconvenient, but it makes not having to sync them or deal with input when no cart is loaded easier) - added "AbsoluteInput" type, which returns mouse coordinates from -32767,-32767 (top left) to +32767,+32767 (bottom right) or -32768,-32768 (offscreen) AbsoluteInput is just something I'm toying with. Idea is to support eg Super Scope or Justifier, or possibly some future Famicom controllers that are absolute-indexed. The coordinates are scaled, so the bigger your window, the more precise they are. But obviously you can't get more precise than the emulated system, so 1x scale will behave the same anyway. I haven't hooked it up yet, need to mess with the idea of custom cursors via phoenix for that first. Also not sure if it will feel smoother or not ... if you resize the window, your mouse will seem to move slower. Still, not having to capture the mouse for SS/JS may be nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
interface->loadRequest(ID::SuperGameBoy, "Game Boy", "gb");
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
string bootROMName = root["rom"]["name"].data;
interface->loadRequest(ID::SuperGameBoyBootROM, bootROMName);
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&ICD2::read, &icd2}, {&ICD2::write, &icd2});
parse_markup_map(m, node);
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_bsx(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_bs_cart = true;
has_bs_slot = true;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
Update to v089r08 release. byuu says: Changelog: - Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load manifests that specify their file names, and they all work - Sufami Turbo can now properly handle carts without RAM, or empty slots entirely - Emulator::Interface structures no longer specify any file names, ever - exposed "capability.(cheats,states)" now. So far, this just means the GBA doesn't show the cheat editor, since it doesn't support cheat codes yet - as such, state manager and cheat editor windows auto-hide (may be a tiny bit inconvenient, but it makes not having to sync them or deal with input when no cart is loaded easier) - added "AbsoluteInput" type, which returns mouse coordinates from -32767,-32767 (top left) to +32767,+32767 (bottom right) or -32768,-32768 (offscreen) AbsoluteInput is just something I'm toying with. Idea is to support eg Super Scope or Justifier, or possibly some future Famicom controllers that are absolute-indexed. The coordinates are scaled, so the bigger your window, the more precise they are. But obviously you can't get more precise than the emulated system, so 1x scale will behave the same anyway. I haven't hooked it up yet, need to mess with the idea of custom cursors via phoenix for that first. Also not sure if it will feel smoother or not ... if you resize the window, your mouse will seem to move slower. Still, not having to capture the mouse for SS/JS may be nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
interface->loadRequest(ID::Satellaview, "BS-X Satellaview", "bs");
parse_markup_memory(bsxcartridge.rom, root["rom"], ID::BsxROM, false);
parse_markup_memory(bsxcartridge.ram, root["ram"], ID::BsxRAM, true);
parse_markup_memory(bsxcartridge.psram, root["psram"], ID::BsxPSRAM, true);
for(auto &node : root) {
if(node.name != "map") continue;
Update to v089r08 release. byuu says: Changelog: - Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load manifests that specify their file names, and they all work - Sufami Turbo can now properly handle carts without RAM, or empty slots entirely - Emulator::Interface structures no longer specify any file names, ever - exposed "capability.(cheats,states)" now. So far, this just means the GBA doesn't show the cheat editor, since it doesn't support cheat codes yet - as such, state manager and cheat editor windows auto-hide (may be a tiny bit inconvenient, but it makes not having to sync them or deal with input when no cart is loaded easier) - added "AbsoluteInput" type, which returns mouse coordinates from -32767,-32767 (top left) to +32767,+32767 (bottom right) or -32768,-32768 (offscreen) AbsoluteInput is just something I'm toying with. Idea is to support eg Super Scope or Justifier, or possibly some future Famicom controllers that are absolute-indexed. The coordinates are scaled, so the bigger your window, the more precise they are. But obviously you can't get more precise than the emulated system, so 1x scale will behave the same anyway. I haven't hooked it up yet, need to mess with the idea of custom cursors via phoenix for that first. Also not sure if it will feel smoother or not ... if you resize the window, your mouse will seem to move slower. Still, not having to capture the mouse for SS/JS may be nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
if(node["id"].data == "rom"
|| node["id"].data == "ram") {
Mapping m({&BSXCartridge::mcu_read, &bsxcartridge}, {&BSXCartridge::mcu_write, &bsxcartridge});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "io") {
Mapping m({&BSXCartridge::mmio_read, &bsxcartridge}, {&BSXCartridge::mmio_write, &bsxcartridge});
parse_markup_map(m, node);
mapping.append(m);
}
}
}
void Cartridge::parse_markup_satellaview(Markup::Node root) {
if(root.exists() == false) return;
has_bs_slot = true;
interface->loadRequest(ID::Satellaview, "BS-X Satellaview", "bs");
for(auto &node : root.find("map")) {
if(node["id"].data == "rom") {
if(satellaviewcartridge.memory.size() == 0) continue;
Mapping m(satellaviewcartridge);
parse_markup_map(m, node);
mapping.append(m);
}
}
}
void Cartridge::parse_markup_sufamiturbo(Markup::Node root, bool slot) {
if(root.exists() == false) return;
has_st_slots = true;
if(slot == 0) {
//load required slot A (will request slot B if slot A cartridge is linkable)
interface->loadRequest(ID::SufamiTurboSlotA, "Sufami Turbo - Slot A", "st");
}
for(auto &node : root.find("map")) {
SufamiTurboCartridge &cart = (slot == 0 ? sufamiturboA : sufamiturboB);
if(node["id"].data == "rom") {
if(cart.rom.size() == 0) continue;
Mapping m(cart.rom);
parse_markup_map(m, node);
if(m.size == 0) m.size = cart.rom.size();
if(m.size) mapping.append(m);
}
if(node["id"].data == "ram") {
if(cart.ram.size() == 0) continue;
Mapping m(cart.ram);
parse_markup_map(m, node);
if(m.size == 0) m.size = cart.ram.size();
if(m.size) mapping.append(m);
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
}
void Cartridge::parse_markup_nss(Markup::Node root) {
if(root.exists() == false) return;
has_nss_dip = true;
nss.dip = interface->dipSettings(root);
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&NSS::read, &nss}, {&NSS::write, &nss});
parse_markup_map(m, node);
mapping.append(m);
}
}
}
void Cartridge::parse_markup_event(Markup::Node root) {
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
if(root.exists() == false) return;
has_event = true;
for(auto &node : root) {
if(node.name != "rom") continue;
unsigned id = numeral(node["id"].data);
if(id > 3) continue;
parse_markup_memory(event.rom[id], node, ID::EventROM0 + id, false);
}
parse_markup_memory(event.ram, root["ram"], ID::EventRAM, true);
event.board = Event::Board::CampusChallenge92;
if(root["name"].data == "Campus Challenge '92") event.board = Event::Board::CampusChallenge92;
if(root["name"].data == "Powerfest '94") event.board = Event::Board::Powerfest94;
event.revision = root["revision"].data == "B" ? 2 : 1;
lstring part = root["timer"].data.split<1>(":");
if(part.size() == 1) event.timer = decimal(part(0));
if(part.size() == 2) event.timer = decimal(part(0)) * 60 + decimal(part(1));
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "rom") {
Mapping m({&Event::rom_read, &event}, [](unsigned, uint8) {});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "ram") {
Mapping m({&Event::ram_read, &event}, {&Event::ram_write, &event});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "dr") {
Mapping m([](unsigned) -> uint8 { return cpu.regs.mdr; }, {&Event::dr, &event});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "sr") {
Mapping m({&Event::sr, &event}, [](unsigned, uint8) {});
parse_markup_map(m, node);
mapping.append(m);
}
}
}
void Cartridge::parse_markup_sa1(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_sa1 = true;
parse_markup_memory(sa1.rom, root["rom"], ID::SA1ROM, false);
2013-01-14 12:10:20 +00:00
parse_markup_memory(sa1.bwram, root["ram[0]"], ID::SA1BWRAM, true);
parse_markup_memory(sa1.iram, root["ram[1]"], ID::SA1IRAM, true);
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
for(auto &node : root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&SA1::mmio_read, &sa1}, {&SA1::mmio_write, &sa1});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "rom") {
Mapping m({&SA1::mmcrom_read, &sa1}, {&SA1::mmcrom_write, &sa1});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "bwram") {
Mapping m({&SA1::mmcbwram_read, &sa1}, {&SA1::mmcbwram_write, &sa1});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "iram") {
Mapping m(sa1.cpuiram);
parse_markup_map(m, node);
if(m.size == 0) m.size = sa1.cpuiram.size();
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_superfx(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_superfx = true;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
parse_markup_memory(superfx.rom, root["rom"], ID::SuperFXROM, false);
parse_markup_memory(superfx.ram, root["ram"], ID::SuperFXRAM, true);
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&SuperFX::mmio_read, &superfx}, {&SuperFX::mmio_write, &superfx});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "rom") {
Mapping m(superfx.cpurom);
parse_markup_map(m, node);
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
if(m.size == 0) m.size = superfx.rom.size();
mapping.append(m);
}
if(node["id"].data == "ram") {
Mapping m(superfx.cpuram);
parse_markup_map(m, node);
if(m.size == 0) m.size = superfx.ram.size();
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_armdsp(Markup::Node root) {
if(root.exists() == false) return;
has_armdsp = true;
2013-01-14 12:10:20 +00:00
string programROMName = root["rom[0]/name"].data;
string dataROMName = root["rom[1]/name"].data;
string dataRAMName = root["ram/name"].data;
interface->loadRequest(ID::ArmDSPPROM, programROMName);
interface->loadRequest(ID::ArmDSPDROM, dataROMName);
if(dataRAMName.empty() == false) {
interface->loadRequest(ID::ArmDSPRAM, dataRAMName);
memory.append({ID::ArmDSPRAM, dataRAMName});
}
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&ArmDSP::mmio_read, &armdsp}, {&ArmDSP::mmio_write, &armdsp});
parse_markup_map(m, node);
mapping.append(m);
}
}
}
void Cartridge::parse_markup_hitachidsp(Markup::Node root, unsigned roms) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_hitachidsp = true;
2013-01-14 12:10:20 +00:00
parse_markup_memory(hitachidsp.rom, root["rom[0]"], ID::HitachiDSPROM, false);
parse_markup_memory(hitachidsp.ram, root["ram[0]"], ID::HitachiDSPRAM, true);
for(auto &word : hitachidsp.dataROM) word = 0x000000;
for(auto &word : hitachidsp.dataRAM) word = 0x00;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
hitachidsp.Frequency = numeral(root["frequency"].data);
if(hitachidsp.Frequency == 0) hitachidsp.frequency = 20000000;
hitachidsp.Roms = roms;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
2013-01-14 12:10:20 +00:00
string dataROMName = root["rom[1]/name"].data;
string dataRAMName = root["ram[1]/name"].data;
interface->loadRequest(ID::HitachiDSPDROM, dataROMName);
if(dataRAMName.empty() == false) {
interface->loadRequest(ID::HitachiDSPDRAM, dataRAMName);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&HitachiDSP::dsp_read, &hitachidsp}, {&HitachiDSP::dsp_write, &hitachidsp});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "rom") {
Mapping m({&HitachiDSP::rom_read, &hitachidsp}, {&HitachiDSP::rom_write, &hitachidsp});
parse_markup_map(m, node);
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
if(m.size == 0) m.size = hitachidsp.rom.size();
mapping.append(m);
}
if(node["id"].data == "ram") {
Mapping m({&HitachiDSP::ram_read, &hitachidsp}, {&HitachiDSP::ram_write, &hitachidsp});
parse_markup_map(m, node);
if(m.size == 0) m.size = hitachidsp.ram.size();
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_necdsp(Markup::Node root) {
if(root.exists() == false) return;
has_necdsp = true;
for(auto &word : necdsp.programROM) word = 0x000000;
for(auto &word : necdsp.dataROM) word = 0x0000;
for(auto &word : necdsp.dataRAM) word = 0x0000;
necdsp.frequency = numeral(root["frequency"].data);
if(necdsp.frequency == 0) necdsp.frequency = 8000000;
necdsp.revision
= root["model"].data == "uPD7725" ? NECDSP::Revision::uPD7725
: root["model"].data == "uPD96050" ? NECDSP::Revision::uPD96050
: NECDSP::Revision::uPD7725;
2013-01-14 12:10:20 +00:00
string programROMName = root["rom[0]/name"].data;
string dataROMName = root["rom[1]/name"].data;
string dataRAMName = root["ram/name"].data;
if(necdsp.revision == NECDSP::Revision::uPD7725) {
interface->loadRequest(ID::Nec7725DSPPROM, programROMName);
interface->loadRequest(ID::Nec7725DSPDROM, dataROMName);
if(dataRAMName.empty() == false) {
interface->loadRequest(ID::Nec7725DSPRAM, dataRAMName);
memory.append({ID::Nec7725DSPRAM, dataRAMName});
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
if(necdsp.revision == NECDSP::Revision::uPD96050) {
interface->loadRequest(ID::Nec96050DSPPROM, programROMName);
interface->loadRequest(ID::Nec96050DSPDROM, dataROMName);
if(dataRAMName.empty() == false) {
interface->loadRequest(ID::Nec96050DSPRAM, dataRAMName);
memory.append({ID::Nec96050DSPRAM, dataRAMName});
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
Update to v088r11 release. byuu says: Changelog: - phoenix has added Window::setModal(bool modal = true); - file dialog is now modal. This allows emulation cores to request data and get it immediately before continuing the loading process - save data is hooked up for most systems, still need to handle subsystem slot saves (Sufami Turbo, basically.) - toggle fullscreen key binding added (Alt+Enter for now. I think F11 is probably better though, Enter is often mapped to game start button.) - video scaling is in (center, scale, stretch), works the same in windowed and fullscreen mode (stretch hides resize window option), all in the settings menu now - enough structure to map all saved paths for the browser and to load BS-X slotted carts, BS-X carts, single Sufami Turbo carts Caveats / Missing: - Super Game Boy input doesn't work yet (due to change in callback binding) - doesn't load secondary Sufami Turbo slot yet - BS-X BIOS isn't show the data pack games to load for some reason (ugh, I hate the shit out of debugging BS-X stuff ...) - need mute audio, sync audio+video toggle, save/load state menu and quick keys, XML mapping information window - need cheat editor and cheat database - need state manager - need to sort subsystems below main systems in load menu (basically just see if media.slot.size() > 0) - need video shaders (will probably leave off filters for the time being ... due to that 24/30-bit thing) - need video adjustments (contrast etc, overscan masks) - need audio adjustments (frequency, latency, resampler, volume, per-system frequency) - need driver selection and input focus policy (driver crash detection would be nice too) - need NSS DIP switch settings (that one will be really fun) - need to save and load window geometry settings - need to hook up controller selection (won't be fun), create a map to hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&NECDSP::read, &necdsp}, {&NECDSP::write, &necdsp});
parse_markup_map(m, node);
mapping.append(m);
necdsp.Select = numeral(node["select"].data);
}
if(node["id"].data == "ram") {
Mapping m({&NECDSP::ram_read, &necdsp}, {&NECDSP::ram_write, &necdsp});
parse_markup_map(m, node);
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_epsonrtc(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_epsonrtc = true;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
string name = root["ram"]["name"].data;
interface->loadRequest(ID::EpsonRTC, name);
memory.append({ID::EpsonRTC, name});
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&EpsonRTC::read, &epsonrtc}, {&EpsonRTC::write, &epsonrtc});
parse_markup_map(m, node);
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_sharprtc(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_sharprtc = true;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
string name = root["ram"]["name"].data;
interface->loadRequest(ID::SharpRTC, name);
memory.append({ID::SharpRTC, name});
for(auto &node : root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&SharpRTC::read, &sharprtc}, {&SharpRTC::write, &sharprtc});
parse_markup_map(m, node);
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_spc7110(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_spc7110 = true;
2013-01-14 12:10:20 +00:00
parse_markup_memory(spc7110.prom, root["rom[0]"], ID::SPC7110PROM, false);
parse_markup_memory(spc7110.drom, root["rom[1]"], ID::SPC7110DROM, false);
parse_markup_memory(spc7110.ram, root["ram"], ID::SPC7110RAM, true);
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
for(auto &node : root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&SPC7110::read, &spc7110}, {&SPC7110::write, &spc7110});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "rom") {
Mapping m({&SPC7110::mcurom_read, &spc7110}, {&SPC7110::mcurom_write, &spc7110});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "ram") {
Mapping m({&SPC7110::mcuram_read, &spc7110}, {&SPC7110::mcuram_write, &spc7110});
parse_markup_map(m, node);
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_sdd1(Markup::Node root) {
if(root.exists() == false) return;
has_sdd1 = true;
parse_markup_memory(sdd1.rom, root["rom"], ID::SDD1ROM, false);
parse_markup_memory(sdd1.ram, root["ram"], ID::SDD1RAM, true);
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&SDD1::read, &sdd1}, {&SDD1::write, &sdd1});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "rom") {
Mapping m({&SDD1::mcurom_read, &sdd1}, {&SDD1::mcurom_write, &sdd1});
parse_markup_map(m, node);
mapping.append(m);
}
if(node["id"].data == "ram") {
Mapping m({&SDD1::mcuram_read, &sdd1}, {&SDD1::mcuram_write, &sdd1});
parse_markup_map(m, node);
mapping.append(m);
}
}
}
void Cartridge::parse_markup_obc1(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_obc1 = true;
parse_markup_memory(obc1.ram, root["ram"], ID::OBC1RAM, true);
for(auto &node : root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&OBC1::read, &obc1}, {&OBC1::write, &obc1});
parse_markup_map(m, node);
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
void Cartridge::parse_markup_hsu1(Markup::Node root) {
if(root.exists() == false) return;
has_hsu1 = true;
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&HSU1::read, &hsu1}, {&HSU1::write, &hsu1});
parse_markup_map(m, node);
mapping.append(m);
}
}
}
void Cartridge::parse_markup_msu1(Markup::Node root) {
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
if(root.exists() == false) return;
has_msu1 = true;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
for(auto &node : root) {
if(node.name != "map") continue;
if(node["id"].data == "io") {
Mapping m({&MSU1::mmio_read, &msu1}, {&MSU1::mmio_write, &msu1});
parse_markup_map(m, node);
mapping.append(m);
}
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
}
Cartridge::Mapping::Mapping() {
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
size = base = mask = 0;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
Cartridge::Mapping::Mapping(SuperFamicom::Memory &memory) {
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
reader = {&SuperFamicom::Memory::read, &memory};
writer = {&SuperFamicom::Memory::write, &memory};
size = base = mask = 0;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
Cartridge::Mapping::Mapping(const function<uint8 (unsigned)> &reader, const function<void (unsigned, uint8)> &writer) {
this->reader = reader;
this->writer = writer;
size = base = mask = 0;
Update to v082r29 release. byuu says: I doubt anyone is going to like these changes, but oh well. The base height output for NES+SNES is now always 256x240. The Enable Overscan option blanks out borders around the screen. This eliminates the need for an overscan software filter. For NES, it's 16px from the top and bottom, and 8px from the left and right. Anything less and you get scrolling artifacts in countless games. For the SNES, it's only 16px from the top and bottom. Main point is that most NTSC SNES games are 224-height games, so you'll have black borders. Oh well, hack the source if you want. Game Boy overscan option does nothing. Everything except for the cheats.xml file now uses BML markup. I need to write a converter for cheats.xml still. Cut the SNES board parsing code in half, 30KB->16KB. Much cleaner now. Took the opportunity to fix a mistake I made back with the XML spec: all numbers are integers, but can be prefixed with 0x to become hexadecimal. Before, offset/size values defaulted to hex-mode even without a prefix, unlike frequency/etc values. The XML shaders have gone in their own direction anyway, with most being multi-pass and incompatible with bsnes. So that said, please don't extend the BML functionality from your end. But f eel free to add to the XML spec, since other emulators now use that as well. And don't misunderstand, I love the work that's being done there. It's pretty awesome to see multi-pass shader capabilities, and the RAM watching stuff is just amazing. If there are any really awesome single-pass shaders that people would like, I can convert it from XML and include it with future releases. On that topic, I removed the watercolor/hdr-tv ones from the binary packages (still in the source archive) ... they are neat, but not very useful for actual gaming. If we had more than one, I'd remove the Direct3D sepia one. Not going to use shaders from a certain bipolar manic, because I'd never hear the end of it if I did :/ Oh, one change I think people will like: MSU1 no longer requires a memory map specification, so MSU1 authors won't have to keep updating to my newer revisions of board markups. Basically, if there's not a board with an msu1 section, it'll check if "gamename.msu" exists. If it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
}
#endif