Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
#ifdef CARTRIDGE_CPP
|
|
|
|
|
|
|
|
void Cartridge::parse_markup(const char *markup) {
|
|
|
|
mapping.reset();
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
XML::Document document(markup);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
auto &cartridge = document["cartridge"];
|
2011-12-31 09:24:58 +00:00
|
|
|
region = cartridge["region"].data != "PAL" ? Region::NTSC : Region::PAL;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
|
|
|
parse_markup_rom(cartridge["rom"]);
|
|
|
|
parse_markup_ram(cartridge["ram"]);
|
2012-06-25 12:49:39 +00:00
|
|
|
parse_markup_psram(cartridge["psram"]);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_icd2(cartridge["icd2"]);
|
2012-05-22 12:10:00 +00:00
|
|
|
parse_markup_bsx(cartridge["bsx"]);
|
|
|
|
parse_markup_sufamiturbo(cartridge["sufamiturbo"]);
|
|
|
|
parse_markup_nss(cartridge["nss"]);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_sa1(cartridge["sa1"]);
|
|
|
|
parse_markup_superfx(cartridge["superfx"]);
|
2012-02-26 07:59:44 +00:00
|
|
|
parse_markup_armdsp(cartridge["armdsp"]);
|
2012-05-22 12:10:00 +00:00
|
|
|
parse_markup_hitachidsp(cartridge["hitachidsp"]);
|
|
|
|
parse_markup_necdsp(cartridge["necdsp"]);
|
|
|
|
parse_markup_epsonrtc(cartridge["epsonrtc"]);
|
|
|
|
parse_markup_sharprtc(cartridge["sharprtc"]);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_spc7110(cartridge["spc7110"]);
|
2012-05-22 12:10:00 +00:00
|
|
|
parse_markup_sdd1(cartridge["sdd1"]);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_obc1(cartridge["obc1"]);
|
|
|
|
parse_markup_msu1(cartridge["msu1"]);
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_map(Mapping &m, XML::Node &map) {
|
2012-01-26 06:50:09 +00:00
|
|
|
m.offset = numeral(map["offset"].data);
|
|
|
|
m.size = numeral(map["size"].data);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
string data = map["mode"].data;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(data == "direct") m.mode = Bus::MapMode::Direct;
|
|
|
|
if(data == "linear") m.mode = Bus::MapMode::Linear;
|
|
|
|
if(data == "shadow") m.mode = Bus::MapMode::Shadow;
|
|
|
|
|
|
|
|
lstring part;
|
2011-12-31 09:24:58 +00:00
|
|
|
part.split(":", map["address"].data);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(part.size() != 2) return;
|
|
|
|
|
|
|
|
lstring subpart;
|
|
|
|
subpart.split("-", part[0]);
|
|
|
|
if(subpart.size() == 1) {
|
|
|
|
m.banklo = hex(subpart[0]);
|
|
|
|
m.bankhi = m.banklo;
|
|
|
|
} else if(subpart.size() == 2) {
|
|
|
|
m.banklo = hex(subpart[0]);
|
|
|
|
m.bankhi = hex(subpart[1]);
|
|
|
|
}
|
|
|
|
|
|
|
|
subpart.split("-", part[1]);
|
|
|
|
if(subpart.size() == 1) {
|
|
|
|
m.addrlo = hex(subpart[0]);
|
|
|
|
m.addrhi = m.addrlo;
|
|
|
|
} else if(subpart.size() == 2) {
|
|
|
|
m.addrlo = hex(subpart[0]);
|
|
|
|
m.addrhi = hex(subpart[1]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-26 08:18:42 +00:00
|
|
|
void Cartridge::parse_markup_memory(MappedRAM &ram, XML::Node &node, unsigned id, bool writable) {
|
|
|
|
string name = node["name"].data;
|
|
|
|
unsigned size = numeral(node["size"].data);
|
|
|
|
ram.map(allocate<uint8>(size, 0xff), size);
|
|
|
|
if(name.empty() == false) {
|
|
|
|
interface->loadRequest(id, name);
|
|
|
|
if(writable) memory.append({id, name});
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
//
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_rom(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-26 08:18:42 +00:00
|
|
|
parse_markup_memory(rom, root, ID::ROM, false);
|
|
|
|
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
for(auto &node : root) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m(rom);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = rom.size();
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_ram(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-26 08:18:42 +00:00
|
|
|
parse_markup_memory(ram, root, ID::RAM, true);
|
|
|
|
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
for(auto &node : root) {
|
|
|
|
Mapping m(ram);
|
|
|
|
parse_markup_map(m, node);
|
2012-05-26 08:18:42 +00:00
|
|
|
if(m.size == 0) m.size = ram.size();
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-06-25 12:49:39 +00:00
|
|
|
void Cartridge::parse_markup_psram(XML::Node &root) {
|
|
|
|
if(root.exists() == false) return;
|
|
|
|
parse_markup_memory(bsxcartridge.psram, root, ID::BsxPSRAM, true);
|
|
|
|
}
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_icd2(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
Update to v088r11 release.
byuu says:
Changelog:
- phoenix has added Window::setModal(bool modal = true);
- file dialog is now modal. This allows emulation cores to request data
and get it immediately before continuing the loading process
- save data is hooked up for most systems, still need to handle
subsystem slot saves (Sufami Turbo, basically.)
- toggle fullscreen key binding added (Alt+Enter for now. I think F11 is
probably better though, Enter is often mapped to game start button.)
- video scaling is in (center, scale, stretch), works the same in
windowed and fullscreen mode (stretch hides resize window option), all
in the settings menu now
- enough structure to map all saved paths for the browser and to load
BS-X slotted carts, BS-X carts, single Sufami Turbo carts
Caveats / Missing:
- Super Game Boy input doesn't work yet (due to change in callback
binding)
- doesn't load secondary Sufami Turbo slot yet
- BS-X BIOS isn't show the data pack games to load for some reason (ugh,
I hate the shit out of debugging BS-X stuff ...)
- need mute audio, sync audio+video toggle, save/load state menu and
quick keys, XML mapping information window
- need cheat editor and cheat database
- need state manager
- need to sort subsystems below main systems in load menu (basically
just see if media.slot.size() > 0)
- need video shaders (will probably leave off filters for the time being
... due to that 24/30-bit thing)
- need video adjustments (contrast etc, overscan masks)
- need audio adjustments (frequency, latency, resampler, volume,
per-system frequency)
- need driver selection and input focus policy (driver crash detection
would be nice too)
- need NSS DIP switch settings (that one will be really fun)
- need to save and load window geometry settings
- need to hook up controller selection (won't be fun), create a map to
hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
|
|
|
has_gb_slot = true;
|
|
|
|
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
interface->loadRequest(ID::SuperGameBoy, "Game Boy", "gb");
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-01-26 06:50:09 +00:00
|
|
|
icd2.revision = max(1, numeral(root["revision"].data));
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
|
|
|
for(auto &node : root) {
|
|
|
|
if(node.name != "map") continue;
|
2012-05-26 08:18:42 +00:00
|
|
|
Mapping m({&ICD2::read, &icd2}, {&ICD2::write, &icd2});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_bsx(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_bs_cart = root["mmio"].exists();
|
|
|
|
has_bs_slot = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
interface->loadRequest(ID::Satellaview, "BS-X Satellaview", "bs");
|
2012-05-22 12:10:00 +00:00
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
if(has_bs_cart) {
|
|
|
|
parse_markup_memory(bsxcartridge.rom, root["rom"], ID::BsxROM, false);
|
|
|
|
parse_markup_memory(bsxcartridge.ram, root["ram"], ID::BsxRAM, true);
|
|
|
|
parse_markup_memory(bsxcartridge.psram, root["psram"], ID::BsxPSRAM, true);
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
for(auto &node : root["slot"]) {
|
|
|
|
if(node.name != "map") continue;
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
if(bsxflash.memory.size() == 0) continue;
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
Mapping m(bsxflash.memory);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
for(auto &node : root["mmio"]) {
|
|
|
|
if(node.name != "map") continue;
|
2012-05-26 08:18:42 +00:00
|
|
|
Mapping m({&BSXCartridge::mmio_read, &bsxcartridge}, {&BSXCartridge::mmio_write, &bsxcartridge});
|
2012-05-22 12:10:00 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
for(auto &node : root["mcu"]) {
|
|
|
|
if(node.name != "map") continue;
|
2012-05-26 08:18:42 +00:00
|
|
|
Mapping m({&BSXCartridge::mcu_read, &bsxcartridge}, {&BSXCartridge::mcu_write, &bsxcartridge});
|
2012-05-22 12:10:00 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void Cartridge::parse_markup_sufamiturbo(XML::Node &root) {
|
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_st_slots = true;
|
|
|
|
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
//load required slot A (will request slot B if slot A cartridge is linkable)
|
|
|
|
interface->loadRequest(ID::SufamiTurboSlotA, "Sufami Turbo - Slot A", "st");
|
2012-05-22 12:10:00 +00:00
|
|
|
|
|
|
|
for(auto &slot : root) {
|
|
|
|
if(slot.name != "slot") continue;
|
|
|
|
bool slotid = slot["id"].data == "A" ? 0 : slot["id"].data == "B" ? 1 : 0;
|
|
|
|
for(auto &node : slot) {
|
|
|
|
if(node.name == "rom") {
|
|
|
|
for(auto &leaf : node) {
|
|
|
|
if(leaf.name != "map") continue;
|
2012-05-26 08:18:42 +00:00
|
|
|
SuperFamicom::Memory &memory = slotid == 0 ? sufamiturbo.slotA.rom : sufamiturbo.slotB.rom;
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
if(memory.size() == 0) continue;
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
Mapping m(memory);
|
|
|
|
parse_markup_map(m, leaf);
|
|
|
|
if(m.size == 0) m.size = memory.size();
|
|
|
|
if(m.size) mapping.append(m);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
2012-05-22 12:10:00 +00:00
|
|
|
if(node.name == "ram") {
|
|
|
|
unsigned ram_size = numeral(node["size"].data);
|
|
|
|
for(auto &leaf : node) {
|
|
|
|
if(leaf.name != "map") continue;
|
2012-05-26 08:18:42 +00:00
|
|
|
SuperFamicom::Memory &memory = slotid == 0 ? sufamiturbo.slotA.ram : sufamiturbo.slotB.ram;
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
if(memory.size() == 0) continue;
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
Mapping m(memory);
|
|
|
|
parse_markup_map(m, leaf);
|
Update to v089r08 release.
byuu says:
Changelog:
- Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load
manifests that specify their file names, and they all work
- Sufami Turbo can now properly handle carts without RAM, or empty slots
entirely
- Emulator::Interface structures no longer specify any file names, ever
- exposed "capability.(cheats,states)" now. So far, this just means the
GBA doesn't show the cheat editor, since it doesn't support cheat
codes yet
- as such, state manager and cheat editor windows auto-hide (may be
a tiny bit inconvenient, but it makes not having to sync them or deal
with input when no cart is loaded easier)
- added "AbsoluteInput" type, which returns mouse coordinates from
-32767,-32767 (top left) to +32767,+32767 (bottom right) or
-32768,-32768 (offscreen)
AbsoluteInput is just something I'm toying with. Idea is to support eg
Super Scope or Justifier, or possibly some future Famicom controllers
that are absolute-indexed. The coordinates are scaled, so the bigger
your window, the more precise they are. But obviously you can't get more
precise than the emulated system, so 1x scale will behave the same
anyway. I haven't hooked it up yet, need to mess with the idea of custom
cursors via phoenix for that first. Also not sure if it will feel
smoother or not ... if you resize the window, your mouse will seem to
move slower. Still, not having to capture the mouse for SS/JS may be
nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
|
|
|
if(m.size == 0) m.size = memory.size();
|
2012-05-22 12:10:00 +00:00
|
|
|
if(m.size) mapping.append(m);
|
|
|
|
}
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_nss(XML::Node &root) {
|
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_nss_dip = true;
|
|
|
|
nss.dip = interface->dipSettings(root);
|
2012-07-08 02:57:34 +00:00
|
|
|
|
|
|
|
for(auto &node : root) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m({&NSS::read, &nss}, {&NSS::write, &nss});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-05-22 12:10:00 +00:00
|
|
|
}
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_sa1(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_sa1 = true;
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(sa1.rom, root["rom"], ID::SA1ROM, false);
|
|
|
|
for(auto &node : root["rom"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-05-26 08:18:42 +00:00
|
|
|
Mapping m({&SA1::mmc_read, &sa1}, {&SA1::mmc_write, &sa1});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(sa1.iram, root["iram"], ID::SA1IRAM, true);
|
|
|
|
for(auto &node : root["iram"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-07-08 02:57:34 +00:00
|
|
|
Mapping m({&SA1::mmc_read, &sa1}, {&SA1::mmc_write, &sa1});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(sa1.bwram, root["bwram"], ID::SA1BWRAM, true);
|
|
|
|
for(auto &node : root["bwram"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-07-08 02:57:34 +00:00
|
|
|
Mapping m({&SA1::mmc_read, &sa1}, {&SA1::mmc_write, &sa1});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
for(auto &node : root["mmio"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-05-26 08:18:42 +00:00
|
|
|
Mapping m({&SA1::mmio_read, &sa1}, {&SA1::mmio_write, &sa1});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_superfx(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_superfx = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(superfx.rom, root["rom"], ID::SuperFXROM, false);
|
|
|
|
for(auto &node : root["rom"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m(superfx.cpurom);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
parse_markup_memory(superfx.ram, root["ram"], ID::SuperFXRAM, true);
|
|
|
|
for(auto &node : root["ram"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m(superfx.cpuram);
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
if(m.size == 0) m.size = superfx.ram.size();
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
for(auto &node : root["mmio"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m({&SuperFX::mmio_read, &superfx}, {&SuperFX::mmio_write, &superfx});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_armdsp(XML::Node &root) {
|
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_armdsp = true;
|
|
|
|
|
|
|
|
string firmware = root["firmware"].data;
|
|
|
|
string sha256 = root["sha256"].data;
|
|
|
|
|
|
|
|
interface->loadRequest(ID::ArmDSP, firmware);
|
|
|
|
|
|
|
|
for(auto &node : root) {
|
|
|
|
if(node.name != "map") continue;
|
2012-05-29 12:20:46 +00:00
|
|
|
Mapping m({&ArmDSP::mmio_read, &armdsp}, {&ArmDSP::mmio_write, &armdsp});
|
2012-05-22 12:10:00 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_hitachidsp(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_hitachidsp = true;
|
|
|
|
|
|
|
|
for(unsigned n = 0; n < 1024; n++) hitachidsp.dataROM[n] = 0x000000;
|
|
|
|
|
2012-01-26 06:50:09 +00:00
|
|
|
hitachidsp.frequency = numeral(root["frequency"].data);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(hitachidsp.frequency == 0) hitachidsp.frequency = 20000000;
|
2011-12-31 09:24:58 +00:00
|
|
|
string firmware = root["firmware"].data;
|
|
|
|
string sha256 = root["sha256"].data;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
Update to v088r15 release.
byuu says:
Changelog:
- default placement of presentation window optimized for 1024x768
displays or larger (sorry if yours is smaller, move the window
yourself.)
- Direct3D waits until a previous Vblank ends before waiting for the
next Vblank to begin (fixes video timing analysis, and ---really---
fast computers.)
- Window::setVisible(false) clears modality, but also fixed in Browser
code as well (fixes loading images on Windows hanging)
- Browser won't consume full CPU resources (but timing analysis will,
I don't want stalls to affect the results.)
- closing settings window while analyzing stops analysis
- you can load the SGB BIOS without a game (why the hell you would want
to ...)
- escape closes the Browser window (it won't close other dialogs, it has
to be hooked up per-window)
- just for fun, joypad hat up/down moves in Browser file list, any
joypad button loads selected game [not very useful, lacks repeat, and
there aren't GUI load file open buttons]
- Super Scope and Justifier crosshairs render correctly (probably
doesn't belong in the core, but it's not something I suspect people
want to do themselves ...)
- you can load GB, SGB, GB, SGB ... without problems (not happy with how
I did this, but I don't want to add an Interface::setInterface()
function yet)
- PAL timing works as I want now (if you want 50fps on a 60hz monitor,
you must not use sync video) [needed to update the DSP frequency when
toggling video/audio sync]
- not going to save input port selection for now (lot of work), but it
will properly keep your port setting across cartridge loads at least
[just goes to controller on emulator restart]
- SFC overscan on and off both work as expected now (off centers image,
on shows entire image)
- laevateinn compiles properly now
- ethos goes to ~/.config/bsnes now that target-ui is dead [honestly,
I recommend deleting the old folder and starting over]
- Emulator::Interface callbacks converted to virtual binding structure
that GUI inherits from (simplifies binding callbacks)
- this breaks Super Game Boy for a bit, I need to rethink
system-specific bindings without direct inheritance
Timing analysis works spectacularly well on Windows, too. You won't get
your 100% perfect rate (unless maybe you leave the analysis running
overnight?), but it'll get really freaking close this way.
2012-05-07 23:29:03 +00:00
|
|
|
interface->loadRequest(ID::HitachiDSP, firmware);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(hitachidsp.rom, root["rom"], ID::HitachiDSPROM, false);
|
|
|
|
for(auto &node : root["rom"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m({&HitachiDSP::rom_read, &hitachidsp}, {&HitachiDSP::rom_write, &hitachidsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
for(auto &node : root["mmio"]) {
|
|
|
|
Mapping m({&HitachiDSP::dsp_read, &hitachidsp}, {&HitachiDSP::dsp_write, &hitachidsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_necdsp(XML::Node &root) {
|
2012-02-26 07:59:44 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_necdsp = true;
|
|
|
|
|
|
|
|
for(unsigned n = 0; n < 16384; n++) necdsp.programROM[n] = 0x000000;
|
|
|
|
for(unsigned n = 0; n < 2048; n++) necdsp.dataROM[n] = 0x0000;
|
2012-02-26 07:59:44 +00:00
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
necdsp.frequency = numeral(root["frequency"].data);
|
|
|
|
if(necdsp.frequency == 0) necdsp.frequency = 8000000;
|
|
|
|
necdsp.revision
|
|
|
|
= root["model"].data == "uPD7725" ? NECDSP::Revision::uPD7725
|
|
|
|
: root["model"].data == "uPD96050" ? NECDSP::Revision::uPD96050
|
|
|
|
: NECDSP::Revision::uPD7725;
|
2012-02-26 07:59:44 +00:00
|
|
|
string firmware = root["firmware"].data;
|
|
|
|
string sha256 = root["sha256"].data;
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
if(necdsp.revision == NECDSP::Revision::uPD7725) {
|
|
|
|
interface->loadRequest(ID::Nec7725DSP, firmware);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
if(necdsp.revision == NECDSP::Revision::uPD96050) {
|
|
|
|
interface->loadRequest(ID::Nec96050DSP, firmware);
|
2012-05-26 08:18:42 +00:00
|
|
|
string name = root["ram"]["name"].data;
|
|
|
|
interface->loadRequest(ID::NecDSPRAM, name);
|
|
|
|
memory.append({ID::NecDSPRAM, name});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
Update to v088r11 release.
byuu says:
Changelog:
- phoenix has added Window::setModal(bool modal = true);
- file dialog is now modal. This allows emulation cores to request data
and get it immediately before continuing the loading process
- save data is hooked up for most systems, still need to handle
subsystem slot saves (Sufami Turbo, basically.)
- toggle fullscreen key binding added (Alt+Enter for now. I think F11 is
probably better though, Enter is often mapped to game start button.)
- video scaling is in (center, scale, stretch), works the same in
windowed and fullscreen mode (stretch hides resize window option), all
in the settings menu now
- enough structure to map all saved paths for the browser and to load
BS-X slotted carts, BS-X carts, single Sufami Turbo carts
Caveats / Missing:
- Super Game Boy input doesn't work yet (due to change in callback
binding)
- doesn't load secondary Sufami Turbo slot yet
- BS-X BIOS isn't show the data pack games to load for some reason (ugh,
I hate the shit out of debugging BS-X stuff ...)
- need mute audio, sync audio+video toggle, save/load state menu and
quick keys, XML mapping information window
- need cheat editor and cheat database
- need state manager
- need to sort subsystems below main systems in load menu (basically
just see if media.slot.size() > 0)
- need video shaders (will probably leave off filters for the time being
... due to that 24/30-bit thing)
- need video adjustments (contrast etc, overscan masks)
- need audio adjustments (frequency, latency, resampler, volume,
per-system frequency)
- need driver selection and input focus policy (driver crash detection
would be nice too)
- need NSS DIP switch settings (that one will be really fun)
- need to save and load window geometry settings
- need to hook up controller selection (won't be fun), create a map to
hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
for(auto &node : root["ram"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m({&NECDSP::dp_read, &necdsp}, {&NECDSP::dp_write, &necdsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
for(auto &node : root["dr"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m({&NECDSP::dr_read, &necdsp}, {&NECDSP::dr_write, &necdsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
|
|
|
for(auto &node : root["sr"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m({&NECDSP::sr_read, &necdsp}, {&NECDSP::sr_write, &necdsp});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_epsonrtc(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_epsonrtc = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-05-26 08:18:42 +00:00
|
|
|
string name = root["name"].data;
|
|
|
|
interface->loadRequest(ID::EpsonRTC, name);
|
|
|
|
memory.append({ID::EpsonRTC, name});
|
|
|
|
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
for(auto &node : root) {
|
|
|
|
if(node.name != "map") continue;
|
2012-05-22 12:10:00 +00:00
|
|
|
Mapping m({&EpsonRTC::read, &epsonrtc}, {&EpsonRTC::write, &epsonrtc});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_sharprtc(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_sharprtc = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
2012-05-26 08:18:42 +00:00
|
|
|
string name = root["name"].data;
|
|
|
|
interface->loadRequest(ID::SharpRTC, name);
|
|
|
|
memory.append({ID::SharpRTC, name});
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
for(auto &node : root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-05-22 12:10:00 +00:00
|
|
|
Mapping m({&SharpRTC::read, &sharprtc}, {&SharpRTC::write, &sharprtc});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_spc7110(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_spc7110 = true;
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(spc7110.prom, root["rom"]["program"], ID::SPC7110PROM, false);
|
|
|
|
parse_markup_memory(spc7110.drom, root["rom"]["data"], ID::SPC7110DROM, false);
|
|
|
|
for(auto &node : root["rom"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-07-08 02:57:34 +00:00
|
|
|
Mapping m({&SPC7110::mcurom_read, &spc7110}, {&SPC7110::mcurom_write, &spc7110});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(spc7110.ram, root["ram"], ID::SPC7110RAM, true);
|
|
|
|
for(auto &node : root["ram"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-07-08 02:57:34 +00:00
|
|
|
Mapping m({&SPC7110::mcuram_read, &spc7110}, {&SPC7110::mcuram_write, &spc7110});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
for(auto &node : root["mmio"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-07-08 02:57:34 +00:00
|
|
|
Mapping m({&SPC7110::mmio_read, &spc7110}, {&SPC7110::mmio_write, &spc7110});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
for(auto &node : root["dcu"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-07-08 02:57:34 +00:00
|
|
|
Mapping m({&SPC7110::dcu_read, &spc7110}, {&SPC7110::dcu_write, &spc7110});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-05-22 12:10:00 +00:00
|
|
|
void Cartridge::parse_markup_sdd1(XML::Node &root) {
|
2012-05-21 10:56:48 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-22 12:10:00 +00:00
|
|
|
has_sdd1 = true;
|
2012-05-21 10:56:48 +00:00
|
|
|
|
2012-07-08 02:57:34 +00:00
|
|
|
parse_markup_memory(sdd1.rom, root["rom"], ID::SDD1ROM, false);
|
|
|
|
for(auto &node : root["rom"]) {
|
2012-05-21 10:56:48 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-07-08 02:57:34 +00:00
|
|
|
Mapping m({&SDD1::mcu_read, &sdd1}, {&SDD1::mcu_write, &sdd1});
|
2012-05-22 12:10:00 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
|
2012-07-08 02:57:34 +00:00
|
|
|
parse_markup_memory(sdd1.ram, root["ram"], ID::SDD1RAM, true);
|
|
|
|
for(auto &node : root["ram"]) {
|
2012-05-22 12:10:00 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-05-29 12:20:46 +00:00
|
|
|
Mapping m({&SDD1::mcu_read, &sdd1}, {&SDD1::mcu_write, &sdd1});
|
2012-05-21 10:56:48 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-07-08 02:57:34 +00:00
|
|
|
|
|
|
|
for(auto &node : root["mmio"]) {
|
|
|
|
if(node.name != "map") continue;
|
|
|
|
Mapping m({&SDD1::mmio_read, &sdd1}, {&SDD1::mmio_write, &sdd1});
|
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
2012-05-21 10:56:48 +00:00
|
|
|
}
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_obc1(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
|
|
|
has_obc1 = true;
|
|
|
|
|
2012-07-09 11:40:23 +00:00
|
|
|
parse_markup_memory(obc1.ram, root["ram"], ID::OBC1RAM, true);
|
|
|
|
for(auto &node : root["ram"]) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(node.name != "map") continue;
|
2012-05-29 12:20:46 +00:00
|
|
|
Mapping m({&OBC1::read, &obc1}, {&OBC1::write, &obc1});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-12-31 09:24:58 +00:00
|
|
|
void Cartridge::parse_markup_msu1(XML::Node &root) {
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
if(root.exists() == false) return;
|
2012-05-29 12:20:46 +00:00
|
|
|
has_msu1 = true;
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
|
|
|
|
for(auto &node : root) {
|
|
|
|
if(node.name != "map") continue;
|
2012-05-29 12:20:46 +00:00
|
|
|
Mapping m({&MSU1::mmio_read, &msu1}, {&MSU1::mmio_write, &msu1});
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
parse_markup_map(m, node);
|
|
|
|
mapping.append(m);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
Cartridge::Mapping::Mapping() {
|
|
|
|
mode = Bus::MapMode::Direct;
|
|
|
|
banklo = bankhi = addrlo = addrhi = offset = size = 0;
|
|
|
|
}
|
|
|
|
|
2012-05-26 08:18:42 +00:00
|
|
|
Cartridge::Mapping::Mapping(SuperFamicom::Memory &memory) {
|
|
|
|
read = {&SuperFamicom::Memory::read, &memory};
|
|
|
|
write = {&SuperFamicom::Memory::write, &memory};
|
Update to v082r29 release.
byuu says:
I doubt anyone is going to like these changes, but oh well.
The base height output for NES+SNES is now always 256x240. The Enable
Overscan option blanks out borders around the screen. This eliminates
the need for an overscan software filter. For NES, it's 16px from the
top and bottom, and 8px from the left and right. Anything less and you
get scrolling artifacts in countless games. For the SNES, it's only 16px
from the top and bottom. Main point is that most NTSC SNES games are
224-height games, so you'll have black borders. Oh well, hack the source
if you want. Game Boy overscan option does nothing.
Everything except for the cheats.xml file now uses BML markup. I need to
write a converter for cheats.xml still. Cut the SNES board parsing code
in half, 30KB->16KB. Much cleaner now.
Took the opportunity to fix a mistake I made back with the XML spec: all
numbers are integers, but can be prefixed with 0x to become hexadecimal.
Before, offset/size values defaulted to hex-mode even without a prefix,
unlike frequency/etc values.
The XML shaders have gone in their own direction anyway, with most being
multi-pass and incompatible with bsnes. So that said, please don't
extend the BML functionality from your end. But f eel free to add to the
XML spec, since other emulators now use that as well. And don't
misunderstand, I love the work that's being done there. It's pretty
awesome to see multi-pass shader capabilities, and the RAM watching
stuff is just amazing.
If there are any really awesome single-pass shaders that people would
like, I can convert it from XML and include it with future releases.
On that topic, I removed the watercolor/hdr-tv ones from the binary
packages (still in the source archive) ... they are neat, but not very
useful for actual gaming.
If we had more than one, I'd remove the Direct3D sepia one. Not going to
use shaders from a certain bipolar manic, because I'd never hear the end
of it if I did :/
Oh, one change I think people will like: MSU1 no longer requires
a memory map specification, so MSU1 authors won't have to keep updating
to my newer revisions of board markups. Basically, if there's not
a board with an msu1 section, it'll check if "gamename.msu" exists. If
it does, MSU1 gets mapped to 00-3f,80-bf:2000-2007. If all you want is
music, make a blank, zero-byte gamename.msu file.
2011-10-04 11:55:39 +00:00
|
|
|
mode = Bus::MapMode::Direct;
|
|
|
|
banklo = bankhi = addrlo = addrhi = offset = size = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
Cartridge::Mapping::Mapping(const function<uint8 (unsigned)> &read_, const function<void (unsigned, uint8)> &write_) {
|
|
|
|
read = read_;
|
|
|
|
write = write_;
|
|
|
|
mode = Bus::MapMode::Direct;
|
|
|
|
banklo = bankhi = addrlo = addrhi = offset = size = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|