Add the cpr-reboot migration mode. Usage:
$ qemu-system-$arch -monitor stdio ...
QEMU 8.1.50 monitor - type 'help' for more information
(qemu) migrate_set_capability x-ignore-shared on
(qemu) migrate_set_parameter mode cpr-reboot
(qemu) migrate -d file:vm.state
(qemu) info status
VM status: paused (postmigrate)
(qemu) quit
$ qemu-system-$arch -monitor stdio -incoming defer ...
QEMU 8.1.50 monitor - type 'help' for more information
(qemu) migrate_set_capability x-ignore-shared on
(qemu) migrate_set_parameter mode cpr-reboot
(qemu) migrate_incoming file:vm.state
(qemu) info status
VM status: running
In this mode, the migrate command saves state to a file, allowing one
to quit qemu, reboot to an updated kernel, and restart an updated version
of qemu. The caller must specify a migration URI that writes to and reads
from a file. Unlike normal mode, the use of certain local storage options
does not block the migration, but the caller must not modify guest block
devices between the quit and restart. To avoid saving guest RAM to the
file, the memory backend must be shared, and the @x-ignore-shared migration
capability must be set. Guest RAM must be non-volatile across reboot, such
as by backing it with a dax device, but this is not enforced. The restarted
qemu arguments must match those used to initially start qemu, plus the
-incoming option.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-6-git-send-email-steven.sistare@oracle.com>
vhost blocks migration if logging is not supported to track dirty
memory, and vhost-user blocks it if the log cannot be saved to a shm fd.
vhost-vdpa blocks migration if both hosts do not support all the device's
features using a shadow VQ, for tracking requests and dirty memory.
vhost-scsi blocks migration if storage cannot be shared across hosts,
or if state cannot be migrated.
None of these conditions apply if the old and new qemu processes do
not run concurrently, and if new qemu starts on the same host as old,
which is the case for cpr.
Narrow the scope of these blockers so they only apply to normal mode.
They will not block cpr modes when they are added in subsequent patches.
No functional change until a new mode is added.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-5-git-send-email-steven.sistare@oracle.com>
Create a mode migration parameter that can be used to select alternate
migration algorithms. The default mode is normal, representing the
current migration algorithm, and does not need to be explicitly set.
No functional change until a new mode is added, except that the mode is
shown by the 'info migrate' command.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-2-git-send-email-steven.sistare@oracle.com>
I have no idea if we can have more than one vmware_vga device, so play
it safe.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-14-quintela@redhat.com>
We can have more than one eeprom93xx.
For instance:
e100_nic_realize() -> eeprom93xx_new()
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-13-quintela@redhat.com>
Current code does:
- register pre_2_10_vmstate_dummy_icp with "icp/server" and instance
dependinfg on cpu number
- for newer machines, it register vmstate_icp with "icp/server" name
and instance 0
- now it unregisters "icp/server" for the 1st instance.
This is wrong at many levels:
- we shouldn't have two VMSTATEDescriptions with the same name
- In case this is the only solution that we can came with, it needs to
be:
* register pre_2_10_vmstate_dummy_icp
* unregister pre_2_10_vmstate_dummy_icp
* register real vmstate_icp
Created vmstate_replace_hack_for_ppc() with warnings left and right
that it is a hack.
CC: Cedric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-8-quintela@redhat.com>
This are the easiest cases, where we were already using
VMSTATE_INSTANCE_ID_ANY.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-3-quintela@redhat.com>
We must not call register_savevm_live() from an instance_init() function
(since this could be called multiple times during device introspection).
Move this to the realize() function instead.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-4-thuth@redhat.com>
There's no need for dedicated handlers here if they don't do anything
special.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-3-thuth@redhat.com>
Since the instance_init() function immediately tries to set the
property to "true", the s390_skeys_set_migration_enabled() tries
to register a savevm handler during instance_init(). However,
instance_init() functions can be called multiple times, e.g. for
introspection of devices. That means multiple instances of devices
can be created during runtime (which is fine as long as they all
don't get realized, too), so the "Prevent double registration of
savevm handler" check in the s390_skeys_set_migration_enabled()
function does not work at all as expected (since there could be
more than one instance).
Thus we must not call register_savevm_live() from an instance_init()
function at all. Move this to the realize() function instead. This
way we can also get rid of the property getter and setter functions
completely, simplifying the code along the way quite a bit.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-2-thuth@redhat.com>
instance_init() can be called multiple times, e.g. during introspection
of the device. We should not install the vmstate handlers here. Do it
in the realize() function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020145554.662751-1-thuth@redhat.com>
There is a batching mechanism for virtio-blk Used Buffer Notifications
that is no longer needed because the previous commit added batching to
virtio_notify_irqfd().
Note that this mechanism was rarely used in practice because it is only
enabled when EVENT_IDX is not negotiated by the driver. Modern drivers
enable EVENT_IDX.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio-blk and virtio-scsi invoke virtio_irqfd_notify() to send Used
Buffer Notifications from an IOThread. This involves an eventfd
write(2) syscall. Calling this repeatedly when completing multiple I/O
requests in a row is wasteful.
Use the defer_call() API to batch together virtio_irqfd_notify() calls
made during thread pool (aio=threads), Linux AIO (aio=native), and
io_uring (aio=io_uring) completion processing.
Behavior is unchanged for emulated devices that do not use
defer_call_begin()/defer_call_end() since defer_call() immediately
invokes the callback when called outside a
defer_call_begin()/defer_call_end() region.
fio rw=randread bs=4k iodepth=64 numjobs=8 IOPS increases by ~9% with a
single IOThread and 8 vCPUs. iodepth=1 decreases by ~1% but this could
be noise. Detailed performance data and configuration specifics are
available here:
https://gitlab.com/stefanha/virt-playbooks/-/tree/blk_io_plug-irqfd
This duplicates the BH that virtio-blk uses for batching. The next
commit will remove it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The networking subsystem may wish to use defer_call(), so move the code
to util/ where it can be reused.
As a reminder of what defer_call() does:
This API defers a function call within a defer_call_begin()/defer_call_end()
section, allowing multiple calls to batch up. This is a performance
optimization that is used in the block layer to submit several I/O requests
at once instead of individually:
defer_call_begin(); <-- start of section
...
defer_call(my_func, my_obj); <-- deferred my_func(my_obj) call
defer_call(my_func, my_obj); <-- another
defer_call(my_func, my_obj); <-- another
...
defer_call_end(); <-- end of section, my_func(my_obj) is called once
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Prepare to move the blk_io_plug_call() API out of the block layer so
that other subsystems call use this deferred call mechanism. Rename it
to defer_call() but leave the code in block/plug.c.
The next commit will move the code out of the block layer.
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Correct minor errors in Cortex-A710 definition
* Implement Neoverse N2 CPU model
* Refactor feature test functions out into separate header
* Fix syndrome for FGT traps on ERET
* Remove 'hw/arm/boot.h' includes from various header files
* pxa2xx: Refactoring/cleanup
* Avoid using 'first_cpu' when first ARM CPU is reachable
* misc/led: LED state is set opposite of what is expected
* hw/net/cadence_gen: clean up to use FIELD macros
* hw/net/cadence_gem: perform PHY access on write only
* hw/net/cadence_gem: enforce 32 bits variable size for CRC
-----BEGIN PGP SIGNATURE-----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=szC7
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20231027' of https://git-us.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Correct minor errors in Cortex-A710 definition
* Implement Neoverse N2 CPU model
* Refactor feature test functions out into separate header
* Fix syndrome for FGT traps on ERET
* Remove 'hw/arm/boot.h' includes from various header files
* pxa2xx: Refactoring/cleanup
* Avoid using 'first_cpu' when first ARM CPU is reachable
* misc/led: LED state is set opposite of what is expected
* hw/net/cadence_gen: clean up to use FIELD macros
* hw/net/cadence_gem: perform PHY access on write only
* hw/net/cadence_gem: enforce 32 bits variable size for CRC
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmU7yz0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3n4xEACK4ti+PFSJHVCQ69NzLLBT
# ybFGFMsMhXJTSNS30Pzs+KWCKWPP59knYBD4qO43W1iV6pPUhy+skr+BFCCRvBow
# se74+Fm1l4LmnuHxgukJzTdvRffI3v37alLn6Y/ioWe8bDpf/IJj8WLj8B1IPoNg
# fswJSGDLpPMovaz8NBQRzglUWpfyzxH+uuW779qBS1nuFdPOfIHKrocvvdrfogBP
# aO8AeiBzz5STW9Naeq+BIKho8S9LinSB6FHa+rRPUDkWx03lvRIvkgGPzHpXYy8I
# zAZ8gUQZyXprHAHMpnoBv8Wcw3Bwc2f+8xx8hnRRki3iBroXKfJA9NkeN0StQmL1
# ZHhfYkiKSS5diIFW5pX6ZixKbXHE2a4aH4zPVUNQriNWOevhe7n82mAPNFIYjk97
# ciTtd4I2oew48sDLSodMiirGL987Mit7KC23itVGezcNfQ9FnVTDmuGy8Rq52BZm
# u4TZjVBrtjQOdMBUcD2hKvXhikQNAdOhArPwNfOr0esSQL44MMEe+6Q5/Cbp0BOE
# stAY/xwSP2cY5mIPnAbIBELseEZsV8ySA3M0y1iRCJptjwbyWM+s1TYz0iXcqeOn
# l6LfiI6r1BqUeoWLGP4042R4FLyLNh6gU/TiFNLu7JJQjXl/EkRgqVXWYfzy2n51
# KKY6iGFi5r41sAU6GIXOkQ==
# =szC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 27 Oct 2023 23:37:49 JST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20231027' of https://git-us.linaro.org/people/pmaydell/qemu-arm: (41 commits)
hw/net/cadence_gem: enforce 32 bits variable size for CRC
hw/net/cadence_gem: perform PHY access on write only
hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields
hw/net/cadence_gem: use FIELD to describe DESCONF6 register fields
hw/net/cadence_gem: use FIELD to describe IRQ register fields
hw/net/cadence_gem: use FIELD to describe [TX|RX]STATUS register fields
hw/net/cadence_gem: use FIELD to describe DMACFG register fields
hw/net/cadence_gem: use FIELD to describe NWCFG register fields
hw/net/cadence_gem: use FIELD to describe NWCTRL register fields
hw/net/cadence_gem: use FIELD for screening registers
hw/net/cadence_gem: use REG32 macro for register definitions
misc/led: LED state is set opposite of what is expected
hw/arm: Avoid using 'first_cpu' when first ARM CPU is reachable
hw/arm/pxa2xx: Realize PXA2XX_I2C device before accessing it
hw/intc/pxa2xx: Factor pxa2xx_pic_realize() out of pxa2xx_pic_init()
hw/intc/pxa2xx: Pass CPU reference using QOM link property
hw/intc/pxa2xx: Convert to Resettable interface
hw/pcmcia/pxa2xx: Inline pxa2xx_pcmcia_init()
hw/pcmcia/pxa2xx: Do not open-code sysbus_create_simple()
hw/pcmcia/pxa2xx: Realize sysbus device before accessing it
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch removes the code that ufs-lu was duplicating from
scsi-hd and allows them to share code.
It makes ufs-lu have a virtual scsi-bus and scsi-hd internally.
This allows scsi related commands to be passed thorugh to the scsi-hd.
The query request and nop command work the same as the existing logic.
Well-known lus do not have a virtual scsi-bus and scsi-hd, and
handle the necessary scsi commands by emulating them directly.
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
* Avoid recompiling libfdt in the FreeBSD VM
* Mark old pc machine types as deprecated
* Force IPv4 in the ipmi-bt-test
-----BEGIN PGP SIGNATURE-----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=A6CT
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-10-27' of https://gitlab.com/thuth/qemu into staging
* Fix global variable shadowing in test code
* Avoid recompiling libfdt in the FreeBSD VM
* Mark old pc machine types as deprecated
* Force IPv4 in the ipmi-bt-test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmU7g+wRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWzIQ//WkiEtXAB4zn/b8H0KfRF283FoFMstBPu
# xrF90WcXMidAPRK8iFhwlae0rVyo40V6A3+/0rntMZ6WPJ3pVvFhmM4zIQgX+1+F
# HT8To7ngngeEey5gJNbOs9GdAFSmF8HwB+HWnEGf2fjWsUvIWgm458ikPUWvhXaJ
# 08wH4V+bmEAKYgny8/ys70E1iFeMwfg+LKXHzVAavaQ8GjM9xFXOjRe8XEq2P7/8
# T99O+hn1iGJfrvZTdJ01awRuOUzA1YTKLCYNSzfRc/j0eYwI28CBm12/sZn4dUA8
# 4rV33ISPw55QmxdVLCfGhAJ6Ih0trOgf8eDBkhcgqWt26ymcKyVL/7kJHcuoY9Q2
# onaN3XT39lVz/HmcuTl9a0sePsZd4d7p0vRsccwTSisX8RpLDab8I8oU8Nvs3VQG
# t23K3XLrdSyMbxsbi9b5BdXJVgkz4irEKG1dX8laIGMGD5zVi/LX2BWjP6QaIOZi
# OyopRQN2uTi6cry5NmblpeLDNJwQdQVxJKlqcvDQQl8TjPXleNtIXL4dr+IpNC5T
# Uo8GJ6+b+AzUI4EaNFybVDPAYHFMJKxvN/QUEjExKV1QTP3V2V9jCbGCF8nio8pp
# ISo11Lo/Z4Z39NwDBH13UuSOdD1rlrU2uuq6LaiRTBfCOTYumzUMvlDTNYqGuSLr
# +1q1GTGsHO0=
# =A6CT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 27 Oct 2023 18:33:32 JST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-10-27' of https://gitlab.com/thuth/qemu:
ipmi-bt-test: force ipv4
tests/vm/freebsd: Add additional library paths for libfdt
docs/about: Mark the old pc-i440fx-2.0 - 2.3 machine types as deprecated
tests/coroutine: Clean up global variable shadowing
tests/aio: Clean up global variable shadowing
tests/npcm7xx_adc: Clean up global variable shadowing
tests/rtl8139: Clean up global variable shadowing
tests/cdrom-test: Clean up global variable shadowing in prepare_image()
tests/virtio-scsi: Clean up global variable shadowing
tests/throttle: Clean up global variable shadowing
system/qtest: Clean up global variable shadowing in qtest_server_init()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The CRC was stored in an unsigned variable in gem_receive. Change it for
a uint32_t to ensure we have the correct variable size here.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-12-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MDIO access is done only on a write to the PHYMNTNC register. A
subsequent read is used to retrieve the result but does not trigger an
MDIO access by itself.
Refactor the PHY access logic to perform all accesses (MDIO reads and
writes) at PHYMNTNC write time.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-11-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the FIELD macro to describe the DESCONF6 register fields.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231017194422.4124691-9-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use de FIELD macro to describe the TXSTATUS and RXSTATUS register
fields.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-7-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace register defines with the REG32 macro from registerfields.h in
the Cadence GEM device.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: sai.pavan.boddu@amd.com
Message-id: 20231017194422.4124691-2-luc.michel@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Testing of the LED state showed that when the LED polarity was
set to GPIO_POLARITY_ACTIVE_LOW and a low logic value was set on
the input GPIO of the LED, the LED was being turn off when it was
expected to be turned on.
Fixes: ddb67f6402 ("hw/misc/led: Allow connecting from GPIO output")
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-id: 20231024191945.4135036-1-milesg@linux.vnet.ibm.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prefer using a well known local first CPU rather than a global one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231025065909.57344-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qbus_new(), called in i2c_init_bus(), should not be called
on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM objects shouldn't access each other internals fields
except using the QOM API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Factor reset code out of the DeviceRealize() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20231020130331.50048-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231020130331.50048-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231020130331.50048-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysbus_mmio_map() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231020130331.50048-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231020130331.50048-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysbus_mmio_map() and sysbus_connect_irq() should not be
called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231020130331.50048-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"hw/arm/boot.h" is only required on the source file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20231025065316.56817-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Steve Sistare