These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
The following instructions are overriden
S2_cabacdecbin
SA1_cmpeqi
Remove the log_pred_write function from op_helper.c
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-8-tsimpson@quicinc.com>
With the overrides added in prior commits, this function is not used
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-7-tsimpson@quicinc.com>
These instructions have implicit reads from p0, so we don't want
them in helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-6-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-5-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-4-tsimpson@quicinc.com>
Add DisasContext arg to gen_log_reg_write_pair also
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-3-tsimpson@quicinc.com>
Enable conditional compilation depending on whether idef-parser
is configured
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-2-tsimpson@quicinc.com>
Tests added for the following instructions
J2_callrh
J2_jumprh
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-10-tsimpson@quicinc.com>
The following instructions are added
J2_callrh
J2_junprh
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-9-tsimpson@quicinc.com>
The following instructions are tested
V6_vasrvuhubrndsat
V6_vasrvuhubsat
V6_vasrvwuhrndsat
V6_vasrvwuhsat
V6_vassign_tmp
V6_vcombine_tmp
V6_vmpyuhvs
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-8-tsimpson@quicinc.com>
The following instructions are added
V6_vasrvuhubrndsat
V6_vasrvuhubsat
V6_vasrvwuhrndsat
V6_vasrvwuhsat
V6_vassign_tmp
V6_vcombine_tmp
V6_vmpyuhvs
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-7-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-6-tsimpson@quicinc.com>
The following instructions are added
V6_v6mpyvubs10_vxx
V6_v6mpyhubs10_vxx
V6_v6mpyvubs10
V6_v6mpyhubs10
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-5-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-4-tsimpson@quicinc.com>
The following instructions are added
L2_loadw_aq
L4_loadd_aq
R6_release_at_vi
R6_release_st_vi
S2_storew_rl_at_vi
S4_stored_rl_at_vi
S2_storew_rl_st_vi
S4_stored_rl_st_vi
The release instructions are nop's in qemu. The others behave as
loads/stores.
The encodings for these instructions changed some "don't care" bits
L2_loadw_locked
L4_loadd_locked
S2_storew_locked
S4_stored_locked
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-3-tsimpson@quicinc.com>
Add support for the ELF flags
Move target/hexagon/cpu.[ch] to be v73
Change the compiler flag used by "make check-tcg"
The decbin instruction is removed in Hexagon v73, so check the
version before trying to compile the instruction.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-2-tsimpson@quicinc.com>
This header is supposed to be private to tcg and in fact
does not need to be included here at all.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, use
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, pull out
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like cpu_in_exclusive_context, but also true if
there is no other cpu against which we could race.
Use it in tb_flush as a direct replacement.
Use it in cpu_loop_exit_atomic to ensure that there
is no loop against cpu_exec_step_atomic.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses have now been expunged.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark all memory operations that are not already marked with UNALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In gen_ldx/gen_stx, the only two locations for memory operations,
mark the operation as either aligned (softmmu) or unaligned
(user-only, as if emulated by the kernel).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The opposite of MO_UNALN is MO_ALIGN.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Memory operations that are not already aligned, or otherwise
marked up, require addition of ctx->default_tcg_memop_mask.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the softmmu tlb to use R0+R1, not any of the normally available
registers. Since we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than zero-extend the guest address into a register,
use an add instruction which zero-extends the second input.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Never used since its introduction.
Fixes: 3d582c6179 ("tcg-ppc64: Rearrange integer constant constraints")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These constraints have not been used for quite some time.
Fixes: 77b73de676 ("Use rem/div[u]_i32 drop div[u]2_i32")
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_{TMP1,TMP2,R0}, not any of the normally
available registers. Now that we handle overlap betwen inputs and
helper arguments, we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate TCG_REG_TMP2. Use R0, TMP1, TMP2 instead of any of
the normally allocated registers for the tlb load.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-3], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
and have eliminated use of A0, we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compare the address vs the tlb entry with sign-extended values.
This simplifies the page+alignment mask constant, and the
generation of the last byte address for the misaligned test.
Move the tlb addend load up, and the zero-extension down.
This frees up a register, which allows us use TMP3 as the returned base
address register instead of A0, which we were using as a 5th temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While performing the load in the delay slot of the call to the common
bswap helper function is cute, it is not worth the added complexity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args. This allows our local
tcg_out_arg_* infrastructure to be removed.
We are no longer filling the call or return branch
delay slots, nor are we tail-calling for the store,
but this seems a small price to pay.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args. This allows our local
tcg_out_arg_* infrastructure to be removed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_st_helper_args. This eliminates the use of a tail call to
the store helper. This may or may not be an improvement, depending on
the call/return branch prediction of the host microarchitecture.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args and tcg_out_ld_helper_ret.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Taylor Simpson