* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64
-----BEGIN PGP SIGNATURE-----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=aqcx
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu into staging
First RISC-V PR for 8.2
* Remove 'host' CPU from TCG
* riscv_htif Fixup printing on big endian hosts
* Add zmmul isa string
* Add smepmp isa string
* Fix page_check_range use in fault-only-first
* Use existing lookup tables for MixColumns
* Add RISC-V vector cryptographic instruction set support
* Implement WARL behaviour for mcountinhibit/mcounteren
* Add Zihintntl extension ISA string to DTS
* Fix zfa fleq.d and fltq.d
* Fix upper/lower mtime write calculation
* Make rtc variable names consistent
* Use abi type for linux-user target_ucontext
* Add RISC-V KVM AIA Support
* Fix riscv,pmu DT node path in the virt machine
* Update CSR bits name for svadu extension
* Mark zicond non-experimental
* Fix satp_mode_finalize() when satp_mode.supported = 0
* Fix non-KVM --enable-debug build
* Add new extensions to hwprobe
* Use accelerated helper for AES64KS1I
* Allocate itrigger timers only once
* Respect mseccfg.RLB for pmpaddrX changes
* Align the AIA model to v1.0 ratified spec
* Don't read the CSR in riscv_csrrw_do64
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmT+ttMACgkQr3yVEwxT
# gBN/rg/+KhOvL9xWSNb8pzlIsMQHLvndno0Sq5b9Rb/o5z1ekyYfyg6712N3JJpA
# TIfZzOIW7oYZV8gHyaBtOt8kIbrjwzGB2rpCh4blhm+yNZv7Ym9Ko6AVVzoUDo7k
# 2dWkLnC+52/l3SXGeyYMJOlgUUsQMwjD6ykDEr42P6DfVord34fpTH7ftwSasO9K
# 35qJQqhUCgB3fMzjKTYICN6Rm1UluijTjRNXUZXC0XZlr+UKw2jT/UsybbWVXyNs
# SmkRtF1MEVGvw+b8XOgA/nG1qVCWglTMcPvKjWMY+cY9WLM6/R9nXAV8OL/JPead
# v1LvROJNukfjNtDW6AOl5/svOJTRLbIrV5EO7Hlm1E4kftGmE5C+AKZZ/VT4ucUK
# XgqaHoXh26tFEymVjzbtyFnUHNv0zLuGelTnmc5Ps1byLSe4lT0dBaJy6Zizg0LE
# DpTR7s3LpyV3qB96Xf9bOMaTPsekUjD3dQI/3X634r36+YovRXapJDEDacN9whbU
# BSZc20NoM5UxVXFTbELQXolue/X2BRLxpzB+BDG8/cpu/MPgcCNiOZaVrr/pOo33
# 6rwwrBhLSCfYAXnJ52qTUEBz0Z/FnRPza8AU/uuRYRFk6JhUXIonmO6xkzsoNKuN
# QNnih/v1J+1XqUyyT2InOoAiTotzHiWgKZKaMfAhomt2j/slz+A=
# =aqcx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Sep 2023 02:42:27 EDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230911' of https://github.com/alistair23/qemu: (45 commits)
target/riscv: don't read CSR in riscv_csrrw_do64
target/riscv: Align the AIA model to v1.0 ratified spec
target/riscv/pmp.c: respect mseccfg.RLB for pmpaddrX changes
target/riscv: Allocate itrigger timers only once
target/riscv: Use accelerated helper for AES64KS1I
linux-user/riscv: Add new extensions to hwprobe
hw/intc/riscv_aplic.c fix non-KVM --enable-debug build
hw/riscv/virt.c: fix non-KVM --enable-debug build
riscv: zicond: make non-experimental
target/riscv: fix satp_mode_finalize() when satp_mode.supported = 0
target/riscv: Update CSR bits name for svadu extension
hw/riscv: virt: Fix riscv,pmu DT node path
target/riscv: select KVM AIA in riscv virt machine
target/riscv: update APLIC and IMSIC to support KVM AIA
target/riscv: Create an KVM AIA irqchip
target/riscv: check the in-kernel irqchip support
target/riscv: support the AIA device emulation with KVM enabled
linux-user/riscv: Use abi type for target_ucontext
hw/intc: Make rtc variable names consistent
hw/intc: Fix upper/lower mtime write calculation
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As per ISA:
"For CSRRWI, if rd=x0, then the instruction shall not read the CSR and
shall not cause any of the side effects that might occur on a CSR read."
trans_csrrwi() and trans_csrrw() call do_csrw() if rd=x0, do_csrw() calls
riscv_csrrw_do64(), via helper_csrw() passing NULL as *ret_value.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230808090914.17634-1-nikita.shubin@maquefel.me>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the new spec, when vsiselect has a reserved value, attempts
from M-mode or HS-mode to access vsireg, or from VS-mode to access
sireg, should preferably raise an illegal instruction exception.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230816061647.600672-1-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the rule-lock bypass (RLB) bit is set in the mseccfg CSR, the PMP
configuration lock bits must not apply. While this behavior is
implemented for the pmpcfgX CSRs, this bit is not respected for
changes to the pmpaddrX CSRs. This patch ensures that pmpaddrX CSR
writes work even on locked regions when the global rule-lock bypass is
enabled.
Signed-off-by: Leon Schuermann <leons@opentitan.org>
Reviewed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230829215046.1430463-1-leon@is.currently.online>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_trigger_init() had been called on reset events that can happen
several times for a CPU and it allocated timers for itrigger. If old
timers were present, they were simply overwritten by the new timers,
resulting in a memory leak.
Divide riscv_trigger_init() into two functions, namely
riscv_trigger_realize() and riscv_trigger_reset() and call them in
appropriate timing. The timer allocation will happen only once for a
CPU in riscv_trigger_realize().
Fixes: 5a4ae64cac ("target/riscv: Add itrigger support when icount is enabled")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230818034059.9146-1-akihiko.odaki@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the accelerated SubBytes/ShiftRows/AddRoundKey AES helper to
implement the first half of the key schedule derivation. This does not
actually involve shifting rows, so clone the same value into all four
columns of the AES vector to counter that operation.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230831154118.138727-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the new extensions in
linux 6.5 to the hwprobe syscall.
And fixes RVC check to OR with correct value.
The previous variable contains 0 therefore it
did work.
Signed-off-by: Robbin Ehn <rehn@rivosinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <bc82203b72d7efb30f1b4a8f9eb3d94699799dc8.camel@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 6df0b37e2ab breaks a --enable-debug build in a non-KVM
environment with the following error:
/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_intc_riscv_aplic.c.o: in function `riscv_kvm_aplic_request':
./qemu/build/../hw/intc/riscv_aplic.c:486: undefined reference to `kvm_set_irq'
collect2: error: ld returned 1 exit status
This happens because the debug build will poke into the
'if (is_kvm_aia(aplic->msimode))' block and fail to find a reference to
the KVM only function riscv_kvm_aplic_request().
There are multiple solutions to fix this. We'll go with the same
solution from the previous patch, i.e. add a kvm_enabled() conditional
to filter out the block. But there's a catch: riscv_kvm_aplic_request()
is a local function that would end up being used if the compiler crops
the block, and this won't work. Quoting Richard Henderson's explanation
in [1]:
"(...) the compiler won't eliminate entire unused functions with -O0"
We'll solve it by moving riscv_kvm_aplic_request() to kvm.c and add its
declaration in kvm_riscv.h, where all other KVM specific public
functions are already declared. Other archs handles KVM specific code in
this manner and we expect to do the same from now on.
[1] https://lore.kernel.org/qemu-riscv/d2f1ad02-eb03-138f-9d08-db676deeed05@linaro.org/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A build with --enable-debug and without KVM will fail as follows:
/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_riscv_virt.c.o: in function `virt_machine_init':
./qemu/build/../hw/riscv/virt.c:1465: undefined reference to `kvm_riscv_aia_create'
This happens because the code block with "if virt_use_kvm_aia(s)" isn't
being ignored by the debug build, resulting in an undefined reference to
a KVM only function.
Add a 'kvm_enabled()' conditional together with virt_use_kvm_aia() will
make the compiler crop the kvm_riscv_aia_create() call entirely from a
non-KVM build. Note that adding the 'kvm_enabled()' conditional inside
virt_use_kvm_aia() won't fix the build because this function would need
to be inlined multiple times to make the compiler zero out the entire
block.
While we're at it, use kvm_enabled() in all instances where
virt_use_kvm_aia() is checked to allow the compiler to elide these other
kvm-only instances as well.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: dbdb99948e ("target/riscv: select KVM AIA in riscv virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicond is now codegen supported in both llvm and gcc.
This change allows seamless enabling/testing of zicond in downstream
projects. e.g. currently riscv-gnu-toolchain parses elf attributes
to create a cmdline for qemu but fails short of enabling it because of
the "x-" prefix.
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Message-ID: <20230808181715.436395-1-vineetg@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the same emulated RISC-V host, the 'host' KVM CPU takes 4 times
longer to boot than the 'rv64' KVM CPU.
The reason is an unintended behavior of riscv_cpu_satp_mode_finalize()
when satp_mode.supported = 0, i.e. when cpu_init() does not set
satp_mode_max_supported(). satp_mode_max_from_map(map) does:
31 - __builtin_clz(map)
This means that, if satp_mode.supported = 0, satp_mode_supported_max
wil be '31 - 32'. But this is C, so satp_mode_supported_max will gladly
set it to UINT_MAX (4294967295). After that, if the user didn't set a
satp_mode, set_satp_mode_default_map(cpu) will make
cfg.satp_mode.map = cfg.satp_mode.supported
So satp_mode.map = 0. And then satp_mode_map_max will be set to
satp_mode_max_from_map(cpu->cfg.satp_mode.map), i.e. also UINT_MAX. The
guard "satp_mode_map_max > satp_mode_supported_max" doesn't protect us
here since both are UINT_MAX.
And finally we have 2 loops:
for (int i = satp_mode_map_max - 1; i >= 0; --i) {
Which are, in fact, 2 loops from UINT_MAX -1 to -1. This is where the
extra delay when booting the 'host' CPU is coming from.
Commit 43d1de32f8 already set a precedence for satp_mode.supported = 0
in a different manner. We're doing the same here. If supported == 0,
interpret as 'the CPU wants the OS to handle satp mode alone' and skip
satp_mode_finalize().
We'll also put a guard in satp_mode_max_from_map() to assert out if map
is 0 since the function is not ready to deal with it.
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 6f23aaeb9b ("riscv: Allow user to set the satp mode")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230817152903.694926-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Svadu specification updated the name of the *envcfg bit from
HADE to ADUE.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230816141916.66898-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On a dtb dumped from the virt machine, dt-validate complains:
soc: pmu: {'riscv,event-to-mhpmcounters': [[1, 1, 524281], [2, 2, 524284], [65561, 65561, 524280], [65563, 65563, 524280], [65569, 65569, 524280]], 'compatible': ['riscv,pmu']} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
That's pretty cryptic, but running the dtb back through dtc produces
something a lot more reasonable:
Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property
Moving the riscv,pmu node out of the soc bus solves the problem.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230727-groom-decline-2c57ce42841c@spud>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Select KVM AIA when the host kernel has in-kernel AIA chip support.
Since KVM AIA only has one APLIC instance, we map the QEMU APLIC
devices to KVM APLIC.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-6-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM AIA can't emulate APLIC only. When "aia=aplic" parameter is passed,
APLIC devices is emulated by QEMU. For "aia=aplic-imsic", remove the
mmio operations of APLIC when using KVM AIA and send wired interrupt
signal via KVM_IRQ_LINE API.
After KVM AIA enabled, MSI messages are delivered by KVM_SIGNAL_MSI API
when the IMSICs receive mmio write requests.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-5-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We create a vAIA chip by using the KVM_DEV_TYPE_RISCV_AIA and then set up
the chip with the KVM_DEV_RISCV_AIA_GRP_* APIs.
We also extend KVM accelerator to specify the KVM AIA mode. The "riscv-aia"
parameter is passed along with --accel in QEMU command-line.
1) "riscv-aia=emul": IMSIC is emulated by hypervisor
2) "riscv-aia=hwaccel": use hardware guest IMSIC
3) "riscv-aia=auto": use the hardware guest IMSICs whenever available
otherwise we fallback to software emulation.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-4-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We check the in-kernel irqchip support when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-3-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In this patch, we create the APLIC and IMSIC FDT helper functions and
remove M mode AIA devices when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-2-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should not use types dependend on host arch for target_ucontext.
This bug is found when run rv32 applications.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230811055438.1945-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The variables whose values are given by cpu_riscv_read_rtc() should be named
"rtc". The variables whose value are given by cpu_riscv_read_rtc_raw()
should be named "rtc_r".
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230728082502.26439-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When writing the upper mtime, we should keep the original lower mtime
whose value is given by cpu_riscv_read_rtc() instead of
cpu_riscv_read_rtc_raw(). The same logic applies to writes to lower mtime.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230728082502.26439-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit a47842d ("riscv: Add support for the Zfa extension") implemented the zfa extension.
However, it has some typos for fleq.d and fltq.d. Both of them misused the fltq.s
helper function.
Fixes: a47842d ("riscv: Add support for the Zfa extension")
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230728003906.768-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVA23 Profiles states:
The RVA23 profiles are intended to be used for 64-bit application
processors that will run rich OS stacks from standard binary OS
distributions and with a substantial number of third-party binary user
applications that will be supported over a considerable length of time
in the field.
The chapter 4 of the unprivileged spec introduces the Zihintntl extension
and Zihintntl is a mandatory extension presented in RVA23 Profiles, whose
purpose is to enable application and operating system portability across
different implementations. Thus the DTS should contain the Zihintntl ISA
string in order to pass to software.
The unprivileged spec states:
Like any HINTs, these instructions may be freely ignored. Hence, although
they are described in terms of cache-based memory hierarchies, they do not
mandate the provision of caches.
These instructions are encoded with non-used opcode, e.g. ADD x0, x0, x2,
which QEMU already supports, and QEMU does not emulate cache. Therefore
these instructions can be considered as a no-op, and we only need to add
a new property for the Zihintntl extension.
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20230726074049.19505-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These are WARL fields - zero out the bits for unavailable counters and
special case the TM bit in mcountinhibit which is hardwired to zero.
This patch achieves this by modifying the value written so that any use
of the field will see the correctly masked bits.
Tested by modifying OpenSBI to write max value to these CSRs and upon
subsequent read the appropriate number of bits for number of PMUs is
enabled and the TM bit is zero in mcountinhibit.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:
* vsm4k.vi
* vsm4r.[vv,vs]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes]
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adds sm4_ck constant for use in sm4 cryptography across different targets.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-15-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Allows sharing of sm4_subword between different targets.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-14-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:
* vgmul.vv
* vghsh.vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:
* vsm3me.vv
* vsm3c.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvksh property]
Message-ID: <20230711165917.2629866-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:
* vsha2ms.vv
* vsha2c[hl].vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvknha & x-zvknhb properties]
[max.chou@sifive.com: Replaced SEW selection to happened during
translation]
Message-ID: <20230711165917.2629866-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:
* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vaesdm.[vv,vs]
* vaesz.vs
* vaesem.[vv,vs]
* vaeskf1.vi
* vaeskf2.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Imported aes-round.h and exposed x-zvkned
property]
[max.chou@sifive.com: Fixed endian issues and replaced the vstart & vl
egs checking by helper function]
[max.chou@sifive.com: Replaced bswap32 calls in aes key expanding]
Message-ID: <20230711165917.2629866-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:
* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v
* vrev8.v
* vandn.[vv,vx]
* vbrev.v
* vclz.v
* vctz.v
* vcpop.v
* vwsll.[vv,vx,vi]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Fix imm mode of vror.vi]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvbb property]
Message-ID: <20230711165917.2629866-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move some macros out of `vector_helper` and into `vector_internals`.
This ensures they can be used by both vector and vector-crypto helpers
(latter implemented in proceeding commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zvbb (implemented in later commit) has a widening instruction, which
requires an extra check on the enabled extensions. Refactor
GEN_OPIVX_WIDEN_TRANS() to take a check function to avoid reimplementing
it.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the checks out of `do_opiv{v,x,i}_gvec{,_shift}` functions
and into the corresponding macros. This enables the functions to be
reused in proceeding commits without check duplication.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:
* vclmulh.[vx,vv]
* vclmul.[vx,vv]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
[max.chou@sifive.com: Exposed x-zvbc property]
Message-ID: <20230711165917.2629866-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the redundant "vl == 0" check which is already included within the vstart >= vl check, when vl == 0.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refactor the non SEW-specific stuff out of `GEN_OPIVV_TRANS` into
function `opivv_trans` (similar to `opivi_trans`). `opivv_trans` will be
used in proceeding vector-crypto commits.
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Take some functions/macros out of `vector_helper` and put them in a new
module called `vector_internals`. This ensures they can be used by both
vector and vector-crypto helpers (latter implemented in proceeding
commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AES MixColumns and InvMixColumns operations are relatively
expensive 4x4 matrix multiplications in GF(2^8), which is why C
implementations usually rely on precomputed lookup tables rather than
performing the calculations on demand.
Given that we already carry those tables in QEMU, we can just grab the
right value in the implementation of the RISC-V AES32 instructions. Note
that the tables in question are permuted according to the respective
Sbox, so we can omit the Sbox lookup as well in this case.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Zewen Ye <lustrew@foxmail.com>
Cc: Weiwei Li <liweiwei@iscas.ac.cn>
Cc: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230731084043.1791984-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bef6f008b98(accel/tcg: Return bool from page_check_range) converts
integer return value to bool type. However, it wrongly converted the use
of the API in riscv fault-only-first, where page_check_range < = 0, should
be converted to !page_check_range.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230729031618.821-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The cpu->cfg.epmp extension is still experimental, but it already has a
'smepmp' riscv,isa string. Add it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zmmul was promoted from experimental to ratified in commit 6d00ffad4e.
Add a riscv,isa string for it.
Fixes: 6d00ffad4e ("target/riscv: move zmmul out of the experimental properties")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Values that have been read via cpu_physical_memory_read() from the
guest's memory have to be swapped in case the host endianess differs
from the guest.
Fixes: a6e13e31d5 ("riscv_htif: Support console output via proxy syscall")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230721094720.902454-3-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The character that should be printed is stored in the 64 bit "payload"
variable. The code currently tries to print it by taking the address
of the variable and passing this pointer to qemu_chr_fe_write(). However,
this only works on little endian hosts where the least significant bits
are stored on the lowest address. To do this in a portable way, we have
to store the value in an uint8_t variable instead.
Fixes: 5033606780 ("RISC-V HTIF Console")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721094720.902454-2-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'host' CPU is available in a CONFIG_KVM build and it's currently
available for all accels, but is a KVM only CPU. This means that in a
RISC-V KVM capable host we can do things like this:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: H extension requires priv spec 1.12.0
This CPU does not have a priv spec because we don't filter its extensions
via priv spec. We shouldn't be reaching riscv_cpu_realize_tcg() at all
with the 'host' CPU.
We don't have a way to filter the 'host' CPU out of the available CPU
options (-cpu help) if the build includes both KVM and TCG. What we can
do is to error out during riscv_cpu_realize_tcg() if the user chooses
the 'host' CPU with accel=tcg:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: 'host' CPU is not compatible with TCG acceleration
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721133411.474105-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we have Eager Page Split support added for ARM in the kernel,
enable it in Qemu. This adds,
-eager-split-size to -accel sub-options to set the eager page split chunk size.
-enable KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20230905091246.1931-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux kernel detects and enables this bit. Once trapped,
EC_SYSTEMREGISTERTRAP is treated like EC_UNCATEGORIZED, so
no changes required within linux-user/aarch64/cpu_loop.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi