Coverity complains about an overflow in isa_fdc_get_drive_max_chs()
that can happen if the loop over fd_formats never finds a match,
because we initialize *maxc to 0 and then at the end of the
function decrement it.
This can't ever actually happen because fd_formats has at least
one entry for each FloppyDriveType, so we must at least once
find a match and update *maxc, *maxh and *maxs. Assert that we
did find a match, which should keep Coverity happy and will also
detect possible bugs in the data in fd_formats.
Resolves: Coverity CID 1547663
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240731143617.3391947-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In ide_atapi_cmd_reply_end() we calculate a 16-bit size, and then
assign its two halves to s->lcyl and s->hcyl like this:
s->lcyl = size;
s->hcyl = size >> 8;
Coverity warns that the first line here can overflow the
8-bit s->lcyl variable. This is true, and in this case we're
deliberately only after the low 8 bits of the value. The
code is clearer to both humans and Coverity if we're explicit
that we only wanted the low 8 bits, though.
Resolves: Coverity CID 1547621
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240731143617.3391947-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In pflash_write() Coverity points out that we can decrement the
unsigned pfl->counter below zero, which makes it wrap around. In
fact this is harmless, because if pfl->counter is 0 at this point we
also increment pfl->wcycle to 3, and the wcycle == 3 handling doesn't
look at counter; the only way back into code which looks at the
counter value is via wcycle == 1, which will reinitialize the counter.
But it's arguably a little clearer to break early in the "counter ==
0" if(), to avoid the decrement-below-zero.
Resolves: Coverity CID 1547611
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240731143617.3391947-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We neglected to clear the @data_count index on ADMA error,
allowing to trigger assertion in sdhci_read_dataport() or
sdhci_write_dataport().
Cc: qemu-stable@nongnu.org
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2455
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-4-philmd@linaro.org>
Guest should not try to read the DAT lines from invalid
command state. If it still insists to do so, return a
dummy value.
Cc: qemu-stable@nongnu.org
Fixes: e2dec2eab0 ("hw/sd/sdcard: Remove default case in read/write on DAT lines")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2454
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-3-philmd@linaro.org>
On error the DAT lines are left unmodified to their
previous states. QEMU returns 0x00 for convenience.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240730092138.32443-2-philmd@linaro.org>
Now than LoongArch target can use the TYPE_LOONGARCH_IPI
model, restrict TYPE_LOONGSON_IPI to MIPS.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-15-philmd@linaro.org>
Loongarch IPI inherits from class LoongsonIPICommonClass, and it
only contains Loongarch 3A5000 virt machine specific interfaces,
rather than mix different machine implementations together.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-14-philmd@linaro.org>
Loongarch IPI is added here, it inherits from class
TYPE_LOONGSON_IPI_COMMON, and two interfaces get_iocsr_as() and
cpu_by_arch_id() are added for Loongarch 3A5000 machine. It can
be used when ipi is emulated in userspace with KVM mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased and simplified]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-13-philmd@linaro.org>
Move the common code from loongson_ipi.c to loongson_ipi_common.c,
call parent_realize() instead of loongson_ipi_common_realize() in
loongson_ipi_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-12-philmd@linaro.org>
In order to access loongson_ipi_core_read/write helpers
from loongson_ipi_common.c in the next commit, make their
prototype declaration public.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-11-philmd@linaro.org>
Allow Loongson IPI implementations to have their own
cpu_by_arch_id() handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-10-philmd@linaro.org>
Allow Loongson IPI implementations to have their own get_iocsr_as()
handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-9-philmd@linaro.org>
In order to get LoongsonIPICommonClass in send_ipi_data()
in the next commit, propagate LoongsonIPICommonState.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-8-philmd@linaro.org>
Move the IPICore structure and corresponding common fields
of LoongsonIPICommonState to "hw/intc/loongson_ipi_common.h".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-7-philmd@linaro.org>
It is easier to manage one array of MMIO MR rather
than one per vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-6-philmd@linaro.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-5-philmd@linaro.org>
Introduce LOONGSON_IPI_COMMON stubs, QDev parent of LOONGSON_IPI.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-4-philmd@linaro.org>
In preparation to extract common IPI code in few commits,
extract loongson_ipi_common_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-3-philmd@linaro.org>
We'll have to add LoongsonIPIClass in few commits,
so rename LoongsonIPI as LoongsonIPIState for clarity.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-2-philmd@linaro.org>
A new minor version of OpenSBI was just released after our bump to
OpenSBI 1.5. It contains significant bug fixes that it's worth doing
a new update for QEMU 9.1.
Submodule roms/opensbi 455de672dd..43cace6c36:
> lib: sbi: check result of pmp_get() in is_pmp_entry_mapped()
> lib: sbi: fwft: fix incorrect size passed to sbi_zalloc()
> lib: sbi: dbtr: fix potential NULL pointer dereferences
> include: Adjust Sscofpmf mhpmevent mask for upper 8 bits
> lib: sbi_hsm: Save/restore menvcfg only when it exists
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240805120259.1705016-2-dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Coverity complained about the possible out-of-bounds access with
counter_virt/counter_virt_prev because these two arrays are
accessed with privilege mode. However, these two arrays are accessed
only when virt is enabled. Thus, the privilege mode can't be M mode.
Add the asserts anyways to detect any wrong usage of these arrays
in the future.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Fixes: Coverity CID 1558459
Fixes: Coverity CID 1558462
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240724-fixes-v1-1-4a64596b0d64@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the risc-v specification:
"FLD and FSD are only guaranteed to execute atomically if the effective
address is naturally aligned and XLEN≥64."
We currently implement fld as MO_ATOM_IFALIGN when XLEN < 64, which does
not violate the rules. But it will hide some problems. So relax it to
MO_ATOM_NONE.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802072417.659-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zama16b loads and stores of no more than MXLEN bits defined in the F, D, and Q
extensions.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802072417.659-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Compressed encodings also applies to zama16b.
https://github.com/riscv/riscv-isa-manual/pull/1557
Suggested-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802072417.659-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fixes higher-half address parsing for QMP commands
`[p]memsave`.
Signed-off-by: Josh Junon <junon@oro.sh>
Message-ID: <20240802140704.13591-1-junon@oro.sh>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Subject tweaked, and one PRId64 updated to PRIu64]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Sweep the entire documentation again. Last done in commit
209e64d9ed (qapi: Refill doc comments to conform to current
conventions).
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240729065220.860163-1-armbru@redhat.com>
[Straightforward conflict with commit 442110bc6f resolved]
Instead of using a slow implementation to close all open fd after
forking, use qemu_close_all_open_fd().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802145423.3232974-6-cleger@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order for this function to be usable by tap.c code, add a list of
file descriptors that should not be closed.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Message-ID: <20240802145423.3232974-5-cleger@rivosinc.com>
[rth: Use max_fd in qemu_close_all_open_fd_close_range]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The same code is used twice to actually close all open file descriptors
after forking. Factorize it in a single place.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802145423.3232974-4-cleger@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to make it cleaner, split qemu_close_all_open_fd() logic into
multiple subfunctions (close with close_range(), with /proc/self/fd and
fallback).
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802145423.3232974-3-cleger@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move close_all_open_fds() in oslib-posix, rename it
qemu_close_all_open_fds() and export it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802145423.3232974-2-cleger@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Analyzing qemu-produced core dumps of multi-threaded apps runs into:
(gdb) info threads
[...]
21 Thread 0x3ff83cc0740 (LWP 9295) warning: Couldn't find general-purpose registers in core file.
<unavailable> in ?? ()
The reason is that all pr_pid values are the same, because the same
TaskState is used for all CPUs when generating NT_PRSTATUS notes.
Fix by using TaskStates associated with individual CPUs.
Cc: qemu-stable@nongnu.org
Fixes: 243c470662 ("linux-user/elfload: Write corefile elf header in one block")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240801202340.21845-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changed val from uint64_t to a pointer to uint64_t in hvf_sysreg_read,
but didn't change its usage in hvf_sysreg_read_cp call.
Fixes: e9e640148c ("hvf: arm: Raise an exception for sysreg by default")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240802-hvf-v1-1-e2c0292037e5@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a channel fails to create, the code currently just returns. This
is wrong for two reasons:
1) Channel n+1 will not get to initialize it's semaphores, leading to
an assert when terminate_threads tries to post to it:
qemu-system-x86_64: ../util/qemu-thread-posix.c:92:
qemu_mutex_lock_impl: Assertion `mutex->initialized' failed.
2) (theoretical) If channel n-1 already started creation it will
defeat the purpose of the channels_created logic which is in place
to avoid migrate_fd_cleanup() to run while channels are still being
created.
This cannot really happen today because the current failure cases
for multifd_new_send_channel_create() are all synchronous,
resulting from qio_channel_file_new_path() getting a bad
filename. This would hit all channels equally.
But I don't want to set a trap for future people, so have all
channels try to create (even if failing), and only fail after the
channels_created semaphore has been posted.
While here, remove the error_report_err call. There's one already at
migrate_fd_cleanup later on.
Cc: qemu-stable@nongnu.org
Reported-by: Jim Fehlig <jfehlig@suse.com>
Fixes: b7b03eb614 ("migration/multifd: Add outgoing QIOChannelFile support")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The QIOChannelFile object already has its reference decremented by
g_autoptr. Trying to unref an extra time causes:
ERROR:../qom/object.c:1241:object_unref: assertion failed: (obj->ref > 0)
Fixes: a701c03dec ("migration: Drop reference to QIOChannel if file seeking fails")
Fixes: 6d3279655a ("migration: Fix file migration with fdset")
Reported-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The vcek-disabled property of the sev-snp-guest object is misspelled
vcek-required (which I suppose would use the opposite polarity) in
the call to object_class_property_add_bool(). Fix it.
Reported-by: Zixi Chen <zixchen@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmasTgwACgkQ7wSWWzmN
YhFUtAgAq45v7fQJ7cKKwRam/VrIkxT5cM59ODwzLSL9kPWfL6f/bJ7xM/zvLyvn
LNBXFWWu+eNKA73f95cckZwaqZ4U6giGbiesCACn1IpgVtieLS+Lq78jsifKIAsR
yxFvbT9oLhU0dZ1Up3+isc6V+jeAE4ZYu4KOiIt7PscTEzkJl+vSUjN4X9rRVtUD
PzONUacL6MoTJtX8UZJZXNzLN9JTsN39Gx+LSDGQ27MDmDvE3R9BW+T0ZgF9JQZ7
wnrL5sharqF3gxa7X55fPBI1qwY5gWcH0yyJpRdM8guA13vhtvlrhNSypip9eKWi
HtPHUTKEB5YOvF236WRiuQPIm/GNpA==
=7HGN
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmasTgwACgkQ7wSWWzmN
# YhFUtAgAq45v7fQJ7cKKwRam/VrIkxT5cM59ODwzLSL9kPWfL6f/bJ7xM/zvLyvn
# LNBXFWWu+eNKA73f95cckZwaqZ4U6giGbiesCACn1IpgVtieLS+Lq78jsifKIAsR
# yxFvbT9oLhU0dZ1Up3+isc6V+jeAE4ZYu4KOiIt7PscTEzkJl+vSUjN4X9rRVtUD
# PzONUacL6MoTJtX8UZJZXNzLN9JTsN39Gx+LSDGQ27MDmDvE3R9BW+T0ZgF9JQZ7
# wnrL5sharqF3gxa7X55fPBI1qwY5gWcH0yyJpRdM8guA13vhtvlrhNSypip9eKWi
# HtPHUTKEB5YOvF236WRiuQPIm/GNpA==
# =7HGN
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Aug 2024 01:10:04 PM AEST
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
net: Reinstate '-net nic, model=help' output as documented in man page
net: update netdev stream man page with the reconnect parameter
net: update netdev dgram man page with unix socket
net: update netdev stream man page with unix socket
net: update netdev stream/dgram man page
virtio-net: Fix network stall at the host side waiting for kick
virtio-net: Ensure queue index fits with RSS
rtl8139: Fix behaviour for old kernels.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While refactoring the NIC initialization code, I broke '-net nic,model=help'
which no longer outputs a list of available NIC models.
Fixes: 2cdeca04ad ("net: report list of available models according to platform")
Cc: qemu-stable@nongnu.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-netdev stream" supports a reconnect parameter that attempts to
reconnect automatically the socket if it is disconnected. The code
has been added but the man page has not been updated.
Fixes: 148fbf0d58 ("net: stream: add a new option to automatically reconnect"
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add the description of "-netdev dgram" with a unix domain socket.
The code has been added but the man page has not been updated.
Fixes: 784e7a2531 ("net: dgram: add unix socket")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add the description of "-netdev stream" with a unix domain socket.
The code has been added but the man page has not been updated.
Include an example how to use "-netdev stream" and "passt" in place
of "-netdev user".
("passt" is a non privileged translation proxy between layer-2, like
"-netdev stream", and layer-4 on host, like TCP, UDP, ICMP/ICMPv6 echo)
Fixes: 13c6be9661 ("net: stream: add unix socket")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add the description of "-netdev stream" and "-netdev dgram" in the QEMU
manpage.
Add some examples on how to use them.
Fixes: 5166fe0ae4 ("qapi: net: add stream and dgram netdevs")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Peter Maydell