Default audio devices can now be created with "-audio". Tests for
soundcards were already using "-audiodev" if they want to specify a
particular backend, for the others remove the last remnants of
legacy audio configuration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The softmmu/ directory contains files specific to system
emulation. Rename it as system/. Update meson rules, the
MAINTAINERS file and all the documentation and comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-ID: <20231004090629.37473-5-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow a client to request a subset of negotiated meta contexts. For
example, a client may ask to use a single connection to learn about
both block status and dirty bitmaps, but where the dirty bitmap
queries only need to be performed on a subset of the disk; forcing the
server to compute that information on block status queries in the rest
of the disk is wasted effort (both at the server, and on the amount of
traffic sent over the wire to be parsed and ignored by the client).
Qemu as an NBD client never requests to use more than one meta
context, so it has no need to use block status payloads. Testing this
instead requires support from libnbd, which CAN access multiple meta
contexts in parallel from a single NBD connection; an interop test
submitted to the libnbd project at the same time as this patch
demonstrates the feature working, as well as testing some corner cases
(for example, when the payload length is longer than the export
length), although other corner cases (like passing the same id
duplicated) requires a protocol fuzzer because libnbd is not wired up
to break the protocol that badly.
This also includes tweaks to 'qemu-nbd --list' to show when a server
is advertising the capability, and to the testsuite to reflect the
addition to that output.
Of note: qemu will always advertise the new feature bit during
NBD_OPT_INFO if extended headers have alreay been negotiated
(regardless of whether any NBD_OPT_SET_META_CONTEXT negotiation has
occurred); but for NBD_OPT_GO, qemu only advertises the feature if
block status is also enabled (that is, if the client does not
negotiate any contexts, then NBD_CMD_BLOCK_STATUS cannot be used, so
the feature is not advertised).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230925192229.3186470-26-eblake@redhat.com>
[eblake: fix logic to reject unnegotiated contexts]
Signed-off-by: Eric Blake <eblake@redhat.com>
All the pieces are in place for a client to finally request extended
headers. Note that we must not request extended headers when qemu-nbd
is used to connect to the kernel module (as nbd.ko does not expect
them, but expects us to do the negotiation in userspace before handing
the socket over to the kernel), but there is no harm in all other
clients requesting them.
Extended headers are not essential to the information collected during
'qemu-nbd --list', but probing for it gives us one more piece of
information in that output. Update the iotests affected by the new
line of output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230925192229.3186470-23-eblake@redhat.com>
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUd4/YPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyM8H/02cRbJcQOjYt7j68zPW6GaDXxBI/UmdWDyG
15LZZbGNOPjyjNd3Vz1M7stQ5rhoKcgo/RdI+0E60a78svgW5JvpXoXR3pksc3Dx
v28B/akXwHUErYFSZQ+2VHNc8OhCd0v2ehxZxbwPEAYIOAj3hcCIVoPGXTnKJmAJ
imr5hjH0wZUc0+xdsmn8Vfdv5NTzpwfVObbGiMZejeJsaoh0y6Rt8RANBMY67KQD
S7/HPlVuDYf/y43t4ZEHNYuV9RaCdZZYlLWwV1scdKaYcofgmtJOKbOdCjHRXgj+
004Afb3rggIoCfnCzOFzhGx+MLDtLjvEn2N4oLEWCLi+k/3huaA=
=GAvH
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci: features, cleanups
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...
Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd ("hw/core: remove needless
includes") because it removed an adjacent #include.
This API manages objects (in this iteration,
dmabuf fds) that can be shared along different
virtio devices, associated to a UUID.
The API allows the different devices to add,
remove and/or retrieve the objects by simply
invoking the public functions that reside in the
virtio-dmabuf file.
For vhost backends, the API stores the pointer
to the backend holding the object.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-3-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add hash function to uuid module using the
djb2 hash algorithm.
Add a couple simple unit tests for the hash
function, checking collisions for similar UUIDs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-2-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
32-bit x86 systems do not have a reserved memory for hole64. On those 32-bit
systems without PSE36 or PAE CPU features, hotplugging memory devices are not
supported by QEMU as QEMU always places hotplugged memory above 4 GiB boundary
which is beyond the physical address space of the processor. Linux guests also
does not support memory hotplug on those systems. Please see Linux
kernel commit b59d02ed08690 ("mm/memory_hotplug: disable the functionality
for 32b") for more details.
Therefore, the maximum limit of the guest physical address in the absence of
additional memory devices effectively coincides with the end of
"above 4G memory space" region for 32-bit x86 without PAE/PSE36. When users
configure additional memory devices, after properly accounting for the
additional device memory region to find the maximum value of the guest
physical address, the address will be outside the range of the processor's
physical address space.
This change adds improvements to take above into consideration.
For example, previously this was allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
With this change now it is no longer allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
qemu-system-x86_64: Address space limit 0xffffffff < 0x2bfffffff phys-bits too low (32)
However, the following are allowed since on both cases physical address
space of the processor is 36 bits:
$ ./qemu-system-x86_64 -cpu pentium2 -m size=10G
$ ./qemu-system-x86_64 -cpu pentium,pse36=on -m size=10G
For 32-bit, without PAE/PSE36, hotplugging additional memory is no longer allowed.
$ ./qemu-system-i386 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
$ ./qemu-system-i386 -machine q35 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
A new compatibility flag is introduced to make sure pc_max_used_gpa() keeps
returning the old value for machines 8.1 and older.
Therefore, the above is still allowed for older machine types in order to support
compatibility. Hence, the following still works:
$ ./qemu-system-i386 -machine pc-i440fx-8.1 -m size=1G,maxmem=3G,slots=2
$ ./qemu-system-i386 -machine pc-q35-8.1 -m size=1G,maxmem=3G,slots=2
Further, following is also allowed as with PSE36, the processor has 36-bit
address space:
$ ./qemu-system-i386 -cpu 486,pse36=on -m size=1G,maxmem=3G,slots=2
After calling CPUID with EAX=0x80000001, all AMD64 compliant processors
have the longmode-capable-bit turned on in the extended feature flags (bit 29)
in EDX. The absence of CPUID longmode can be used to differentiate between
32-bit and 64-bit processors and is the recommended approach. QEMU takes this
approach elsewhere (for example, please see x86_cpu_realizefn()), With
this change, pc_max_used_gpa() also uses the same method to detect 32-bit
processors.
Unit tests are modified to not run 32-bit x86 tests that use memory hotplug.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230922160413.165702-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 18a536f1f8 ("accel/tcg: Always require can_do_io") fixed
the GitLab issue #1884: we can now re-enable those tests.
This reverts commit f959c3d87c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231003063808.66564-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This build option has been deprecated since 8.0.
Remove all CONFIG_GPROF code that depends on that,
including one errant check using TARGET_GPROF.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Same as with the x86 verison of this test, we relied on the contents of
all pages in RAM to be the same across the entire test range, which is
very fragile. Zero the first byte of each page before running the
increment loop to fix this.
Fixes: 5571dc824b ("tests/migration: Enable the migration test on s390x, too")
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-4-d-tatianin@yandex-team.ru>
The migration qtest all the way up to this point used to work by sheer
luck relying on the contents of all pages from 1MiB to 100MiB to contain
the same one value in the first byte initially.
This easily breaks if we reduce the amount of RAM for the test instances
from 150MiB to e.g 110MiB since that makes SeaBIOS dirty some of the
pages starting at about 0x5dd2000 (~93 MiB) as it reuses those for the
HighMemory allocator since commit dc88f9b72df ("malloc: use large
ZoneHigh when there is enough memory").
This would result in the following errors:
12/60 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test ERROR 2.74s killed by signal 6 SIGABRT
stderr:
Memory content inconsistency at 5dd2000 first_byte = cc last_byte = cb current = 9e hit_edge = 1
Memory content inconsistency at 5dd3000 first_byte = cc last_byte = cb current = 89 hit_edge = 1
Memory content inconsistency at 5dd4000 first_byte = cc last_byte = cb current = 23 hit_edge = 1
Memory content inconsistency at 5dd5000 first_byte = cc last_byte = cb current = 31 hit_edge = 1
Memory content inconsistency at 5dd6000 first_byte = cc last_byte = cb current = 70 hit_edge = 1
Memory content inconsistency at 5dd7000 first_byte = cc last_byte = cb current = ff hit_edge = 1
Memory content inconsistency at 5dd8000 first_byte = cc last_byte = cb current = 54 hit_edge = 1
Memory content inconsistency at 5dd9000 first_byte = cc last_byte = cb current = 64 hit_edge = 1
Memory content inconsistency at 5dda000 first_byte = cc last_byte = cb current = 1d hit_edge = 1
Memory content inconsistency at 5ddb000 first_byte = cc last_byte = cb current = 1a hit_edge = 1
and in another 26 pages**
ERROR:../tests/qtest/migration-test.c:300:check_guests_ram: assertion failed: (bad == 0)
Fix this by always zeroing the first byte of each page in the range so
that we get consistent results no matter the initial contents.
Fixes: ea0c6d6239 ("test: Postcopy")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-3-d-tatianin@yandex-team.ru>
So that we have less magic numbers to deal with. This also allows us to
reuse these in the following commits.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-2-d-tatianin@yandex-team.ru>
* fix for KVM on Apple M2
* introduce machine property "audiodev"
* ui/vnc: Require audiodev= to enable audio
* audio: remove QEMU_AUDIO_* and -audio-help support
* audio: forbid using default audiodev backend with -audiodev and -nodefaults
* remove compatibility code for old machine types
* make-release: do not ship dtc sources
* build system cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUb0QgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOpnAf9EFXfGkXpqQ5Q8ZbVlVc5GQKofMHW
OZwamTBlp/c07+QcQiMxwLhIW0iyDhrfdCjoFSUaTA8O10FM1YrFv4SkUryYb9B3
bmoTl4NeLvmkxpC47GEeaaBfjyM0G/9Ip9Zsuqx3u+gSzwTbkEstA2u7gcsN0tL9
VlhMSiV82uHhRC/DJYLxr+8bRYSIm1AeuI8K/O1yags85Kztf3UiQUhePIKLznMH
BdORjD+i46xM1dE8ifpdsunm462cDWz/faAnIH0YVKBlshnQHXKTO+GDA/Fbfl51
wFfupZXo93wwgawS7elAUzI+gwaKCPRHA8NDcukeO91hTzk6i14y04u5SQ==
=nv64
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fix from optionrom build
* fix for KVM on Apple M2
* introduce machine property "audiodev"
* ui/vnc: Require audiodev= to enable audio
* audio: remove QEMU_AUDIO_* and -audio-help support
* audio: forbid using default audiodev backend with -audiodev and -nodefaults
* remove compatibility code for old machine types
* make-release: do not ship dtc sources
* build system cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUb0QgUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOpnAf9EFXfGkXpqQ5Q8ZbVlVc5GQKofMHW
# OZwamTBlp/c07+QcQiMxwLhIW0iyDhrfdCjoFSUaTA8O10FM1YrFv4SkUryYb9B3
# bmoTl4NeLvmkxpC47GEeaaBfjyM0G/9Ip9Zsuqx3u+gSzwTbkEstA2u7gcsN0tL9
# VlhMSiV82uHhRC/DJYLxr+8bRYSIm1AeuI8K/O1yags85Kztf3UiQUhePIKLznMH
# BdORjD+i46xM1dE8ifpdsunm462cDWz/faAnIH0YVKBlshnQHXKTO+GDA/Fbfl51
# wFfupZXo93wwgawS7elAUzI+gwaKCPRHA8NDcukeO91hTzk6i14y04u5SQ==
# =nv64
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 03 Oct 2023 04:30:00 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
audio: forbid default audiodev backend with -nodefaults
audio: propagate Error * out of audio_init
vt82c686 machines: Support machine-default audiodev with fallback
hw/ppc: Support machine-default audiodev with fallback
hw/arm: Support machine-default audiodev with fallback
Introduce machine property "audiodev"
audio: remove QEMU_AUDIO_* and -audio-help support
audio: simplify flow in audio_init
audio: commonize voice initialization
audio: return Error ** from audio_state_by_name
audio: allow returning an error from the driver init
audio: Require AudioState in AUD_add_capture
ui/vnc: Require audiodev= to enable audio
crypto: only include tls-cipher-suites in emulators
scsi-disk: ensure that FORMAT UNIT commands are terminated
esp: restrict non-DMA transfer length to that of available data
esp: use correct type for esp_dma_enable() in sysbus_esp_gpio_demux()
Makefile: build plugins before running TCG tests
meson: clean up static_library keyword arguments
make-release: do not ship dtc sources
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add back test-plugins and, after making sure it is always defined,
do so unconditionally.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: 2c13c57441 ("configure, meson: move --enable-plugins to meson", 2023-09-07)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So no need to assert we are in x86_64.
Once there, refactor the function to remove useless variables.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-11-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The bootsector code is read only from the guest (otherwise we are
going to have problems with it being read from both source and
destination).
Create a single copy for all the tests.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-10-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So just make it a global variable.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-9-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So arch_dirty_ring option becomes one option like the others.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-8-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fixes build with -Wshadow=local
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-ID: <20230922105742.81317-1-berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
some insns use the result register implicitly as an input. Thus, we
could end up with data from the previous insn spilling over.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230913105326.40832-4-kbastian@mail.uni-paderborn.de>
RSx for d regs and e regs now use the same numbering. This makes sure
that mixing d and e registers in an insn test will not overwrite data
between registers.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230913105326.40832-2-kbastian@mail.uni-paderborn.de>
we would crash if width was 0 for these insns, as tcg_gen_deposit() is
undefined for that case. For TriCore, width = 0 is a mov from the src reg
to the dst reg, so we special case this here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-ID: <20230828112651.522058-9-kbastian@mail.uni-paderborn.de>
we don't want to exclude ISA v1.6.2 insns from our tests.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230828112651.522058-2-kbastian@mail.uni-paderborn.de>
Originally meant to avoid a shadowed variable "s", which was fixed by
renaming the outer declaration to "qts". Avoid the chance of an overflow
in the computation of ABS(t - s).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are the last users of the 128K SeaBIOS blob in the i440FX family.
Removing them allows us to drop PCI support from the 128K blob,
thus making it easier to update SeaBIOS to newer versions.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Simplify the NIC init code of the jazz machine a little bit
* Minor qtest and avocado fixes
-----BEGIN PGP SIGNATURE-----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=FioB
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-09-25' of https://gitlab.com/thuth/qemu into staging
* Make keyutils independent from keyring in meson.build
* Simplify the NIC init code of the jazz machine a little bit
* Minor qtest and avocado fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmURS8gRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVn4A/+NQKFZcN7gVn5JXkK7kf6i01LNmAoqjj9
# QeQL+WCoNC68OApw7DxIEnpBYT0G42NTHHx4SYeOvzJUzCpeWcxYzQUz58ObZML7
# +OKsiOsaHu3/qOuihBCn43et6moLdDCWbee5Zr6JQv/Fjn3q3nEQZnJDWdw8vm1v
# csYQJZOD6HelLVMmbLfl1szzrykDTT53NhPncH/SjPz6we17sKqHqmT6LBUIsXcV
# u2LaowppKmT7Ooexu6SmsCagLhtWuYo1iGGcRqoojtRWo7eZtWLrAy2DJpyFkPBW
# AIYBfntRISZv4eBGCxcVfvODD/Q4OXHuYTfGzD3m+ELJ6hUk/+d4/aHJ2hm+KEm+
# AD0IpDtimaEmyQTPlaWHhhEur/82JZ+zYlxUMPf3+hglB/rbr6fhA0SMAV6nwR0r
# N8jnB8UCml9oDxJVvDZyrcPMGFs1xlr5FVSHHEoL338SvSfjG3NOEtcNao9n6A8d
# rO2CfPzI7peQhKWAzJL+qpnmenyIniH23tFnf2mpOZ0g45ZWtJeT0CXL3aQO3XAZ
# m56pkM0d/etAHHRoLQ5D/iKZpwiTRLjdzsJ0gMAQsIuRlG/j5h+zou0vUMgm6F8F
# igRHLxytlywZBTCABm2XIlKmaJp8hQlVQMpKsv/BwzTvzzk0GGS5d1qzzFt5WWR7
# 4rSalTn5Xuw=
# =FioB
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Sep 2023 04:58:48 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-09-25' of https://gitlab.com/thuth/qemu:
tests/avocado: fix waiting for vm shutdown in replay_linux
hw/mips/jazz: Simplify the NIC setup code
hw/mips/jazz: Move the NIC init code into a separate function
tests/qtest/netdev-socket: Do not test multicast on Darwin
tests/qtest/m48t59-test: Silence compiler warning with -Wshadow
tests/qtest/netdev-socket: Raise connection timeout to 120 seconds
meson.build: Make keyutils independent from keyring
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes the race condition in waiting for shutdown
of the replay linux test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Suggested-by: John Snow <jsnow@redhat.com>
Message-ID: <20230811070608.3383343-4-pavel.dovgalyuk@ispras.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not run this test on Darwin, otherwise we get:
qemu-system-arm: -netdev dgram,id=st0,remote.type=inet,remote.host=230.0.0.1,remote.port=1234:
can't add socket to multicast group 230.0.0.1: Can't assign requested address
Broken pipe
../../tests/qtest/libqtest.c:191: kill_qemu() tried to terminate QEMU
process but encountered exit status 1 (expected 0)
Abort trap: 6
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230918062549.2363-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling this file with -Wshadow=local , we get:
../tests/qtest/m48t59-test.c: In function ‘bcd_check_time’:
../tests/qtest/m48t59-test.c:195:17: warning: declaration of ‘s’
shadows a previous local [-Wshadow=local]
195 | long t, s;
| ^
../tests/qtest/m48t59-test.c:158:17: note: shadowed declaration is here
158 | QTestState *s = m48t59_qtest_start();
| ^
Rename the QTestState variable to "qts" which is the common
naming for such a variable in other tests.
Reported-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230922163742.149444-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test actually requires Python bindings to libnbd rather than libnbd
itself. Clarify that inside the message.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230906140917.559129-3-den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We need to check that we are able to create large enough file which is
used as an export base rather than connection URL. Unfortunately, there
are cases when the TEST_IMG_FILE is not defined. We should fallback to
TEST_IMG in that case.
This problem has been detected when running
./check -nbd 5
The test should be able to run while it does not.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230906140917.559129-2-den@openvz.org>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This will enable removing deprecated default audiodev support.
I did not figure out how to make the audiodev represented as an
interface node, so this is a workaround. I am not sure what would be
the proper way.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <6e7f2808dd40679a415812767b88f2a411fc137f.1650874791.git.mkletzan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For user-only mode we reveal a subset of the AArch64 ID registers
to the guest, to emulate the kernel's trap-and-emulate-ID-regs
handling. Update the feature bit masks to match upstream kernel
commit a48fa7efaf1161c1c.
None of these features are yet implemented by QEMU, so this
doesn't yet have a behavioural change, but implementation of
FEAT_MOPS and FEAT_HBC is imminent.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* regular calculation of cluster used bitmap of the image file
* cluster allocation on the base of that bitmap (effectively allocation of
new clusters could be done inside the image if that offset space is unused)
* support of DISCARD and WRITE_ZEROES operations
* image check bugfixes
* unit tests fixes
* unit tests covering new functionality
-----BEGIN PGP SIGNATURE-----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=FUWj
-----END PGP SIGNATURE-----
Merge tag 'pull-parallels-2023-09-20-v2' of https://src.openvz.org/scm/~den/qemu into staging
Parallels format driver:
* regular calculation of cluster used bitmap of the image file
* cluster allocation on the base of that bitmap (effectively allocation of
new clusters could be done inside the image if that offset space is unused)
* support of DISCARD and WRITE_ZEROES operations
* image check bugfixes
* unit tests fixes
* unit tests covering new functionality
# -----BEGIN PGP SIGNATURE-----
#
# iQHDBAABCgAtFiEE9vE2f3B8+RUZInytPzClrpN3nJ8FAmUL7u4PHGRlbkBvcGVu
# dnoub3JnAAoJED8wpa6Td5yfdaUL/RW+nOYlFNXlrjOVeasgGLkAKrKBja8O3/As
# aRo0DLZKITK8qbLEBAeTDyCpN9LLwy7WdUR1uT4V54FzE5zZP6HAdBEoj9AsaW/9
# wsTF+oyKeqmXw2y348t+lclp8eREHySecwiVhaxTpG9J2TQfDP/D2yhzRU88P7nH
# rbVZjOF2yOthzW6Y8h8e/LMd8rfODO053tYaMEBngjirBZnhESH3mAm1WB5mYs+q
# 2++4XQZcFFKWFp952MaEDphpwYdh80E65g4vth80JrDTyyMH0KZE9cQqbFb5UgZv
# aV1/DCaH0WTSDbjCaI/SrmqKXrO0Mkd/y/ShoQpTu7qJO/FbaClA58f+KfGE7VBd
# Fa5pM+JN12UVNxnNIF/Oe+wAiVUJYKtLaDMKibj+MUjM5sE/ZRLqzFLktDbQT0kS
# Qvs1u8HTvirJpvxOkJv4cEuNw07JERCzpl/qPF6XkS9rcKeIormhftaaRmjILxS/
# KEmDVNj63g1D0XDY3WTF7LHLNjtXpw==
# =FUWj
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Sep 2023 03:21:18 EDT
# gpg: using RSA key F6F1367F707CF91519227CAD3F30A5AE93779C9F
# gpg: issuer "den@openvz.org"
# gpg: Good signature from "Denis V. Lunev <den@openvz.org>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6F1 367F 707C F915 1922 7CAD 3F30 A5AE 9377 9C9F
* tag 'pull-parallels-2023-09-20-v2' of https://src.openvz.org/scm/~den/qemu: (22 commits)
tests: extend test 131 to cover availability of the write-zeroes
parallels: naive implementation of parallels_co_pwrite_zeroes
tests: extend test 131 to cover availability of the discard operation
parallels: naive implementation of parallels_co_pdiscard
parallels: improve readability of allocate_clusters
parallels: naive implementation of allocate_clusters with used bitmap
parallels: update used bitmap in allocate_cluster
parallels: accept multiple clusters in mark_used()
tests: test self-cure of parallels image with duplicated clusters
tests: fix broken deduplication check in parallels format test
parallels: collect bitmap of used clusters at open
parallels: add test which will validate data_off fixes through repair
parallels: fix broken parallels_check_data_off()
tests: ensure that image validation will not cure the corruption
parallels: create mark_used() helper which sets bit in used bitmap
parallels: refactor path when we need to re-check image in parallels_open
parallels: return earlier from parallels_open() function on error
parallels: return earler in fail_format branch in parallels_open()
parallels: invent parallels_opts_prealloc() helper to parse prealloc opts
parallels: fix memory leak in parallels_open()
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Graph locking part 4 (node management)
- qemu-img map: report compressed data blocks
- block-backend: process I/O in the current AioContext
-----BEGIN PGP SIGNATURE-----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=qTNA
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Graph locking part 4 (node management)
- qemu-img map: report compressed data blocks
- block-backend: process I/O in the current AioContext
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmULHnURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9aB5hAAqH8To7WIUtg1rj1PY809ck78ghm18PKg
# TNdN7IbrXQghX5foh2VgPwVVl+JaW2CSrJYWQcAO6AbvFduNIi9iKzI6RT0xKXpb
# b8oQXS7zntFzwBv8ohOU5NSVJOgVmNP4h5qJIMmXgB9ZcLFG40zggVH2qQT7guUf
# 9MAc81kI/d5vvSHY0ZjdHjNOgwG4q1j8yytL7OFqWUfB8sXloUCA9lT7w4jIYD8L
# v2StUOLWB01Zts2o8SCNaFxuajs6wUee8b/DM1cyPyLy4KtOdXvLKhq2NlXpLo2i
# aZFr4PtizTVwrQZIJttA9jqM+QCsDOsiSat3BLNNsKUaCWHZB0rOGLCzMCtisyOo
# 4PzuL4UI21ik2zieO1qVM+Thqvw16kHtp6dD9pGk4X4ogGreGYEIxzBl79luR+AV
# NCRizoeFWTHKymS1tSoKrWT9ZNHcLmwemO6Tt1rMYk9jV3T4uY5e1NwxaUavEfsX
# f8dLfQjhNiySOoDknT1OSerBOVdTXURS2ri5H3GZxrxvJ4jOeFkn52C8r3YlZ3Wp
# Cr9LCUJZeXgwY+Q1JQ3D4VLY8aZ83txpw6XKEy0eTEv5wxkBj5LWhXx7hNb5F3lg
# bqaRYijVJn+P82wVxlftIzMfNeVBFHzFE90taPV5grJjr8lgrGBFmD7Puc97kfDX
# oTDBwRxJeew=
# =qTNA
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Sep 2023 12:31:49 EDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits)
block: mark aio_poll as non-coroutine
block-backend: process zoned requests in the current AioContext
block-backend: process I/O in the current AioContext
test-bdrv-drain: avoid race with BH in IOThread drain test
block: remove AIOCBInfo->get_aio_context()
qemu-img: map: report compressed data blocks
block: add BDRV_BLOCK_COMPRESSED flag for bdrv_block_status()
block: Mark bdrv_add/del_child() and caller GRAPH_WRLOCK
block: Mark bdrv_unref_child() GRAPH_WRLOCK
block: Mark bdrv_root_unref_child() GRAPH_WRLOCK
block: Take graph rdlock in bdrv_change_aio_context()
block: Take graph rdlock in bdrv_drop_intermediate()
block: Mark bdrv_parent_cb_change_media() GRAPH_RDLOCK
block: Mark bdrv_child_perm() GRAPH_RDLOCK
block: Mark bdrv_get_cumulative_perm() and callers GRAPH_RDLOCK
block: Mark bdrv_parent_perms_conflict() and callers GRAPH_RDLOCK
block: Mark bdrv_attach_child() GRAPH_WRLOCK
block: Call transaction callbacks with lock held
block: Mark bdrv_attach_child_common() GRAPH_WRLOCK
block: Mark bdrv_replace_child_tran() GRAPH_WRLOCK
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Fix for file-posix's zoning code crashing on I/O errors
- Throttling refactoring
-----BEGIN PGP SIGNATURE-----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=oKgk
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2023-09-01' of https://gitlab.com/hreitz/qemu into staging
Block patches
- Fix for file-posix's zoning code crashing on I/O errors
- Throttling refactoring
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmTxnMISHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYkUP+gMG9hhzvgjj/tw9rEBQjciihzcQmqQJ
# 2Mm37RH2jj5bnnTdaTbMkcRRwVhncYSCwK9q5EYVbZmU9C/v4YJmsSEQlcl7wVou
# hbPUv6NHaBrJZX9nxNSa2RHui6pZMLKa/D0rJVB7NjYBrrRtiPo7kiLVQYjYXa2g
# kcCCfY4t3Z2RxOP31mMXRjYlhJE9bIuZdTEndrKme8KS2JGPZEJ9xjkoW1tj96EX
# oc/Cg2vk7AEtsFYA0bcD8fTFkBDJEwyYl3usu7Tk24pvH16jk7wFSqRVSsDMfnER
# tG8X3mHLIY0hbSkpzdHJdXINvZ6FWpQb0CGzIKr+pMiuWVdWr1HglBr0m4pVF+Y4
# A6AI6VX2JJgtacypoDyCZC9mzs1jIdeiwq9v5dyuikJ6ivTwEEoeoSLnLTN3AjXn
# 0mtQYzgCg5Gd6+rTo7XjSO9SSlbaVrDl/B2eXle6tmIFT5k+86fh0hc+zTmP8Rkw
# Knbc+5Le95wlMrOUNx2GhXrTGwX510hLxKboho/LITxtAzqvXnEJKrYbnkm3WPnw
# wfHnR5VQH1NKEpiH/p33og6OV/vu9e7vgp0ZNZV136SnzC90C1zMUwg2simJW701
# 34EtN0XBX8XBKrxfe7KscV9kRE8wrWWJVbhp+WOcQEomGI8uraxzWqDIk/v7NZXv
# m4XBscaB+Iri
# =oKgk
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 04:11:46 EDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2023-09-01' of https://gitlab.com/hreitz/qemu:
tests/file-io-error: New test
file-posix: Simplify raw_co_prw's 'out' zone code
file-posix: Fix zone update in I/O error path
file-posix: Check bs->bl.zoned for zone info
file-posix: Clear bs->bl.zoned on error
block/throttle-groups: Use ThrottleDirection instread of bool is_write
fsdev: Use ThrottleDirection instread of bool is_write
throttle: use THROTTLE_MAX/ARRAY_SIZE for hard code
throttle: use enum ThrottleDirection instead of bool is_write
cryptodev: use NULL throttle timer cb for read direction
test-throttle: test read only and write only
throttle: support read-only and write-only
test-throttle: use enum ThrottleDirection
throttle: introduce enum ThrottleDirection
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch contains test which minimally tests write-zeroes on top of
working discard.
The following checks are added:
* write 2 clusters, write-zero to the first allocated cluster
* write 2 cluster, write-zero to the half the first allocated cluster
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
This patch contains test which minimally tests discard and new cluster
allocation logic.
The following checks are added:
* write 2 clusters, discard the first allocated
* write another cluster, check that the hole is filled
* write 2 clusters, discard the first allocated, write 1 cluster at
non-aligned to cluster offset (2 new clusters should be allocated)
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
The test is quite similar with the original one for duplicated clusters.
There is the only difference in the operation which should fix the
image.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Original check is broken as supposed reading from 2 different clusters
results in read from the same file offset twice. This is definitely
wrong.
We should be sure that
* the content of both clusters is correct after repair
* clusters are at the different offsets after repair
In order to check the latter we write some content into the first one
and validate that fact.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
We have only check through self-repair and that proven to be not enough.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Since
commit cfce1091d5
Author: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Date: Tue Jul 18 12:44:29 2023 +0200
parallels: Image repairing in parallels_open()
there is a potential pit fall with calling
qemu-io -c "read"
The image is opened in read-write mode and thus could be potentially
repaired. This could ruin testing process.
The patch forces read-only opening for reads. In that case repairing
is impossible.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
This patch fixes a race condition in test-bdrv-drain that is difficult
to reproduce. test-bdrv-drain sometimes fails without an error message
on the block pull request sent by Kevin Wolf on Sep 4, 2023. I was able
to reproduce it locally and found that "block-backend: process I/O in
the current AioContext" (in this patch series) is the first commit where
it reproduces.
I do not know why "block-backend: process I/O in the current AioContext"
exposes this bug. It might be related to the fact that the test's preadv
request runs in the main thread instead of IOThread a after my commit.
That might simply change the timing of the test.
Now on to the race condition in test-bdrv-drain. The main thread
schedules a BH in IOThread a and then drains the BDS:
aio_bh_schedule_oneshot(ctx_a, test_iothread_main_thread_bh, &data);
/* The request is running on the IOThread a. Draining its block device
* will make sure that it has completed as far as the BDS is concerned,
* but the drain in this thread can continue immediately after
* bdrv_dec_in_flight() and aio_ret might be assigned only slightly
* later. */
do_drain_begin(drain_type, bs);
If the BH completes before do_drain_begin() then there is nothing to
worry about.
If the BH invokes bdrv_flush() before do_drain_begin(), then
do_drain_begin() waits for it to complete.
The problematic case is when do_drain_begin() runs before the BH enters
bdrv_flush(). Then do_drain_begin() misses the BH and the drain
mechanism has failed in quiescing I/O.
Fix this by incrementing the in_flight counter so that do_drain_begin()
waits for test_iothread_main_thread_bh().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230912231037.826804-3-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now "qemu-img map" reports compressed blocks as containing data
but having no host offset. This is not very informative. Instead,
let's add another boolean field named "compressed" in case JSON output
mode is specified. This is achieved by utilizing new allocation status
flag BDRV_BLOCK_COMPRESSED for bdrv_block_status().
Also update the expected qemu-iotests outputs to contain the new field.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20230907210226.953821-3-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of taking the writer lock internally, require callers to already
hold it when calling bdrv_unref_child(). These callers will typically
already hold the graph lock once the locking work is completed, which
means that they can't call functions that take it internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230911094620.45040-21-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function reads the parents list, so it needs to hold the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230911094620.45040-14-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of taking the writer lock internally, require callers to already
hold it when calling bdrv_attach_child_common(). These callers will
typically already hold the graph lock once the locking work is
completed, which means that they can't call functions that take it
internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230911094620.45040-13-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_unref() is called by a lot of places that need to hold the graph
lock (it naturally happens in the context of operations that change the
graph). However, bdrv_unref() takes the graph writer lock internally, so
it can't actually be called while already holding a graph lock without
causing a deadlock.
bdrv_unref() also can't just become GRAPH_WRLOCK because it drains the
node before closing it, and draining requires that the graph is
unlocked.
The solution is to defer deleting the node until we don't hold the lock
any more and draining is possible again.
Note that keeping images open for longer than necessary can create
problems, too: You can't open an image again before it is really closed
(if image locking didn't prevent it, it would cause corruption).
Reopening an image immediately happens at least during bdrv_open() and
bdrv_co_create().
In order to solve this problem, make sure to run the deferred unref in
bdrv_graph_wrunlock(), i.e. the first possible place where we can drain
again. This is also why bdrv_schedule_unref() is marked GRAPH_WRLOCK.
The output of iotest 051 is updated because the additional polling
changes the order of HMP output, resulting in a new "(qemu)" prompt in
the test output that was previously on a separate line and filtered out.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230911094620.45040-6-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The documentation for bdrv_append() says that the caller must hold the
AioContext lock for bs_top. Change all callers to actually adhere to the
contract.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230911094620.45040-5-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 0d58c66068 ("softmmu: Use async_run_on_cpu in tcg_commit")
introduced a regression which is only triggered by the MIPS Malta
machine. Since those tests are gatting and disturb the CI workflow,
disable them until https://gitlab.com/qemu-project/qemu/-/issues/1866
is fixed.
$ make check-avocado \
AVOCADO_TAGS='arch:mipsel arch:mips64el' \
AVOCADO_ALLOW_UNTRUSTED_CODE=1 \
AVOCADO_TIMEOUT_EXPECTED=1
AVOCADO tests/avocado
(04/24) tests/avocado/boot_linux_console.py:BootLinuxConsole.test_mips_malta32el_nanomips_4k: INTERRUPTED: Test interrupted by SIGTERM\nRunner error occurred: Timeout reached\nOriginal status: ERROR\n... (90.39 s)
(05/24) tests/avocado/boot_linux_console.py:BootLinuxConsole.test_mips_malta32el_nanomips_16k_up: INTERRUPTED: Test interrupted by SIGTERM\nRunner error occurred: Timeout reached\nOriginal status: ERROR\n... (90.29 s)
(06/24) tests/avocado/boot_linux_console.py:BootLinuxConsole.test_mips_malta32el_nanomips_64k_dbg: INTERRUPTED: Test interrupted by SIGTERM\nRunner error occurred: Timeout reached\nOriginal status: ERROR\n... (92.53 s)
(11/24) tests/avocado/machine_mips_malta.py:MaltaMachineFramebuffer.test_mips_malta_i6400_framebuffer_logo_1core: INTERRUPTED: Test interrupted by SIGTERM\nRunner error occurred: Timeout reached\nOriginal status: ERROR\n... (25.78 s)
RESULTS : PASS 8 | ERROR 0 | FAIL 0 | SKIP 7 | WARN 2 | INTERRUPT 5 | CANCEL 2
JOB TIME : 525.60 s ^^^^^^^^^^^
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230913135339.9128-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230914155422.426639-10-alex.bennee@linaro.org>
Occasionally some avocado tests will fail waiting for console line
despite the machine running correctly. Console data goes missing, as can
be seen in the console log. This is due to _console_interaction calling
makefile() on the console socket each time it is invoked, which must be
losing old buffer contents when going out of scope.
It is not enough to makefile() with buffered=0. That helps significantly
but data loss is still possible. My guess is that readline() has a line
buffer even when the file is in unbuffered mode, that can eat data.
Fix this by providing a console file that persists for the life of the
console.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-Id: <20230912131340.405619-1-npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230914155422.426639-9-alex.bennee@linaro.org>
On Linux we use PR_SET_PDEATHSIG to kill orphaned QEMU processes
if we fail to call qtest_quit(), or the test program aborts/segvs.
This prevents meson from hanging forever due to the orphaned
process keeping stdout open.
On FreeBSD we can achieve the same using PROC_PDEATHSIG_CTL, which
gives us the equivalent protection against hangs.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230912184130.3056054-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230914155422.426639-6-alex.bennee@linaro.org>
Without this call, the QEMU process is being left running which on
FreeBSD 13.2 at least, makes meson think the test is still running,
and thus execution of "make check" continues forever.
This fixes the regression introduced in:
commit a9c9bbee85
Author: Chris Laplante <chris@laplante.io>
Date: Tue Aug 22 17:31:02 2023 +0100
qtest: microbit-test: add tests for nRF51 DETECT
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1882
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230912184130.3056054-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230914155422.426639-5-alex.bennee@linaro.org>
Update from clfs 5.0 to clfs 8.1, which includes updates
to binutils 2.41, gcc 13.2, and glibc 2.38.
See https://github.com/loongson/build-tools
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829220228.928506-2-richard.henderson@linaro.org>
Message-Id: <20230914155422.426639-4-alex.bennee@linaro.org>
Bookworm has been out a while now. Time to update our containers to
the current stable. This requires the latest lcitool repo so update
the sub-module too.
For some reason the MIPs containers won't build so skip those for now.
We also have to skip the armel builds due to a stuck libc update.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230914155422.426639-2-alex.bennee@linaro.org>
AF_XDP is a network socket family that allows communication directly
with the network device driver in the kernel, bypassing most or all
of the kernel networking stack. In the essence, the technology is
pretty similar to netmap. But, unlike netmap, AF_XDP is Linux-native
and works with any network interfaces without driver modifications.
Unlike vhost-based backends (kernel, user, vdpa), AF_XDP doesn't
require access to character devices or unix sockets. Only access to
the network interface itself is necessary.
This patch implements a network backend that communicates with the
kernel by creating an AF_XDP socket. A chunk of userspace memory
is shared between QEMU and the host kernel. 4 ring buffers (Tx, Rx,
Fill and Completion) are placed in that memory along with a pool of
memory buffers for the packet data. Data transmission is done by
allocating one of the buffers, copying packet data into it and
placing the pointer into Tx ring. After transmission, device will
return the buffer via Completion ring. On Rx, device will take
a buffer form a pre-populated Fill ring, write the packet data into
it and place the buffer into Rx ring.
AF_XDP network backend takes on the communication with the host
kernel and the network interface and forwards packets to/from the
peer device in QEMU.
Usage example:
-device virtio-net-pci,netdev=guest1,mac=00:16:35:AF:AA:5C
-netdev af-xdp,ifname=ens6f1np1,id=guest1,mode=native,queues=1
XDP program bridges the socket with a network interface. It can be
attached to the interface in 2 different modes:
1. skb - this mode should work for any interface and doesn't require
driver support. With a caveat of lower performance.
2. native - this does require support from the driver and allows to
bypass skb allocation in the kernel and potentially use
zero-copy while getting packets in/out userspace.
By default, QEMU will try to use native mode and fall back to skb.
Mode can be forced via 'mode' option. To force 'copy' even in native
mode, use 'force-copy=on' option. This might be useful if there is
some issue with the driver.
Option 'queues=N' allows to specify how many device queues should
be open. Note that all the queues that are not open are still
functional and can receive traffic, but it will not be delivered to
QEMU. So, the number of device queues should generally match the
QEMU configuration, unless the device is shared with something
else and the traffic re-direction to appropriate queues is correctly
configured on a device level (e.g. with ethtool -N).
'start-queue=M' option can be used to specify from which queue id
QEMU should start configuring 'N' queues. It might also be necessary
to use this option with certain NICs, e.g. MLX5 NICs. See the docs
for examples.
In a general case QEMU will need CAP_NET_ADMIN and CAP_SYS_ADMIN
or CAP_BPF capabilities in order to load default XSK/XDP programs to
the network interface and configure BPF maps. It is possible, however,
to run with no capabilities. For that to work, an external process
with enough capabilities will need to pre-load default XSK program,
create AF_XDP sockets and pass their file descriptors to QEMU process
on startup via 'sock-fds' option. Network backend will need to be
configured with 'inhibit=on' to avoid loading of the program.
QEMU will need 32 MB of locked memory (RLIMIT_MEMLOCK) per queue
or CAP_IPC_LOCK.
There are few performance challenges with the current network backends.
First is that they do not support IO threads. This means that data
path is handled by the main thread in QEMU and may slow down other
work or may be slowed down by some other work. This also means that
taking advantage of multi-queue is generally not possible today.
Another thing is that data path is going through the device emulation
code, which is not really optimized for performance. The fastest
"frontend" device is virtio-net. But it's not optimized for heavy
traffic either, because it expects such use-cases to be handled via
some implementation of vhost (user, kernel, vdpa). In practice, we
have virtio notifications and rcu lock/unlock on a per-packet basis
and not very efficient accesses to the guest memory. Communication
channels between backend and frontend devices do not allow passing
more than one packet at a time as well.
Some of these challenges can be avoided in the future by adding better
batching into device emulation or by implementing vhost-af-xdp variant.
There are also a few kernel limitations. AF_XDP sockets do not
support any kinds of checksum or segmentation offloading. Buffers
are limited to a page size (4K), i.e. MTU is limited. Multi-buffer
support implementation for AF_XDP is in progress, but not ready yet.
Also, transmission in all non-zero-copy modes is synchronous, i.e.
done in a syscall. That doesn't allow high packet rates on virtual
interfaces.
However, keeping in mind all of these challenges, current implementation
of the AF_XDP backend shows a decent performance while running on top
of a physical NIC with zero-copy support.
Test setup:
2 VMs running on 2 physical hosts connected via ConnectX6-Dx card.
Network backend is configured to open the NIC directly in native mode.
The driver supports zero-copy. NIC is configured to use 1 queue.
Inside a VM - iperf3 for basic TCP performance testing and dpdk-testpmd
for PPS testing.
iperf3 result:
TCP stream : 19.1 Gbps
dpdk-testpmd (single queue, single CPU core, 64 B packets) results:
Tx only : 3.4 Mpps
Rx only : 2.0 Mpps
L2 FWD Loopback : 1.5 Mpps
In skb mode the same setup shows much lower performance, similar to
the setup where pair of physical NICs is replaced with veth pair:
iperf3 result:
TCP stream : 9 Gbps
dpdk-testpmd (single queue, single CPU core, 64 B packets) results:
Tx only : 1.2 Mpps
Rx only : 1.0 Mpps
L2 FWD Loopback : 0.7 Mpps
Results in skb mode or over the veth are close to results of a tap
backend with vhost=on and disabled segmentation offloading bridged
with a NIC.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (docker/lcitool)
Signed-off-by: Jason Wang <jasowang@redhat.com>
This pulls in the fixes for libasan version as well as support for
libxdp that will be used for af-xdp netdev in the next commits.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Refactoring is done in preparation for support of multiple advanced
descriptors RX modes, especially packet-split modes.
Signed-off-by: Tomasz Dzieciol <t.dzieciol@partner.samsung.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Motorola treats denormals with explicit integer bit set as
having unbiased exponent 0, unlike Intel which treats it as
having unbiased exponent 1 (more like all other IEEE formats
that have no explicit integer bit).
Add a flag on FloatFmt to differentiate the behaviour.
Reported-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I'm getting io-qcow2-244 test failure on mips*
due to output mismatch:
Take an internal snapshot:
-qemu-img: Could not create snapshot 'test': -95 (Operation not supported)
+qemu-img: Could not create snapshot 'test': -122 (Operation not supported)
No errors were found on the image.
This is because errno values might be different across
different architectures.
This error message in qemu-img.c is the only one which
prints errno directly, all the rest print strerror(errno)
only. Fix this error message and the expected output
of the 3 test cases too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230811110946.2435067-1-mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit ca2a5e630d ("qemu_cleanup: begin drained section after
vm_shutdown()"), there will be an additional pause for jobs during
qemu_cleanup(). The reason is that the bdrv_drain_all() call in
do_vm_stop() is not inside the drained section used by qemu_cleanup()
anymore. I.e., there is a second drained section now that ends before
the final one in qemu_cleanup() starts. Thus, job_pause() is called
twice during cleanup (via child_job_drained_begin()).
Test 185 needs to be adapted directly too, because it waits for a
specific number of JOB_STATUS_CHANGE events before the
BLOCK_JOB_CANCELLED event.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20230817112538.255111-1-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement the QARMA3 cryptographic algorithm for PAC calculation.
Implement a cpu feature to select the algorithm and document it.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-6-richard.henderson@linaro.org
Message-Id: <20230609172324.982888-4-aaron@os.amperecomputing.com>
[rth: Merge cpu feature addition from another patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_FPAC, AUT* instructions that fail authentication
do not produce an error value but instead fault.
For pauth-2, install a signal handler and verify it gets called.
For pauth-4 and pauth-5, we are explicitly testing the error value,
so there's nothing to test with FEAT_FPAC, so exit early.
Adjust the makefile to use -cpu neoverse-v1, which has FEAT_EPAC
but not FEAT_FPAC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These tests do nothing additional compared to the other test,
so let's remove the empty functions to avoid wasting some few
precious test cycles here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The command always fails with "Error: Parameter 'xbzrle_cache_size'
expects a power of two no less than the target page size". The test
passes anyway. Change the argument from 1 to 64k to make the test a
bit more useful.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
docs/multi-thread-compression.txt uses parameter names with
underscores instead of dashes. Wrong since day one.
docs/rdma.txt, tests/qemu-iotests/181, and tests/qtest/test-hmp.c are
wrong the same way since commit cbde7be900 (v6.0.0). Hard to see,
as test-hmp doesn't check whether the commands work, and iotest 181
appears to be unaffected.
Fixes: 263170e679 (docs: Add a doc about multiple thread compression)
Fixes: cbde7be900 (migrate: remove QMP/HMP commands for speed, downtime and cache size)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
In the previous commit e2f938265e ("tests/qemu-iotests/197: add
testcase for CoR with subclusters") we've introduced a new testcase for
copy-on-read with subclusters. Test 197 always forces qcow2 as the top
image, but allows backing image to be in any format. That last test
case didn't meet these requirements, so let's fix it by using more
generic "qemu-io -c map" command.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20230907220718.983430-1-andrey.drobyshev@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch includes the following tests
Test mmio read
Test ufs device initialization and ufs-lu recognition
Test I/O (Performs a write followed by a read to verify)
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 9e9207f54505e9ba30931849f949ff6f474ac333.1693980783.git.jeuk20.kim@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini