$(HOST_CC) is only used to invoke the preprocessor, and $(CC) can be
used instead now that there is a Tricore C compiler. Remove the variable
from config-host.mak.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both gvnc and sysprof-capture come with pkg-config files, so specify
the method to find them.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For NCQ, PxCI is cleared on command queued successfully.
For non-NCQ, PxCI is cleared on command completed successfully.
Successfully means ERR_STAT, BUSY and DRQ are all cleared.
A command that has ERR_STAT set, does not get to clear PxCI.
See AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and RegFIS:ClearCI,
and 5.3.16.5 ERR:FatalTaskfile.
In the case of non-NCQ commands, not clearing PxCI is needed in order
for host software to be able to see which command slot that failed.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-id: 20230609140844.202795-7-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
Write a pattern to the first cluster. Corrupt the data_off field and check
if the field was repaired on image opening and the pattern has not changed.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Images repairing in parallels_open() was added, thus parallels tests fail.
Access to an image leads to repairing the image. Further image check don't
detect any corruption. Remove reads after image creation in test 131.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
In this test cluster size is 64k, but modern tools generate images with
cluster size 1M. Calculate cluster size using track field from image header.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Replace hardcoded numbers by variables.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Fill a parallels image with a pattern and write another pattern to the
second cluster. Corrupt the image and check if the pattern changes. Repair
the image and check the patterns on guest and host sides.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Write a pattern to the last cluster, extend the image by 1 claster, repair
and check that the last cluster still has the same pattern.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Fill the image with a pattern to generate entries in the BAT, set the first
BAT entry outside the image, try to read the corrupted image. At the image
opening it should be repaired, check for zeroes in the first cluster.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
* Fixes for the Aspeed I2C model
* New SDK image for avocado tests
* blockdev support for flash device definition
* SD refactoring preparing ground for eMMC support
-----BEGIN PGP SIGNATURE-----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=ymmX
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixes for the Aspeed I2C model
* New SDK image for avocado tests
* blockdev support for flash device definition
* SD refactoring preparing ground for eMMC support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmTxsaQACgkQUaNDx8/7
# 7KGXmg//XJNisscl/VWSBaGmH5MbQUAg/QCRalXx1V/lJ8rhE/JqwnWKuoPFd4EN
# iDlh3ufpzxPhHFc9boechuM5ytlrJxpLJoCIJ4sw/4qnO3Dy3Q6BCy1t8Ma62D1u
# oE7cAMHsriJ1uTJNHUTFo72VapTaH2XwFN9lFDuQW45d+WWAXtVJsqvRgFETNmw6
# YYnTTpH2gLTZZFEgOixhWpGLh4Ibc/l8U1VzL0ctQmC11xng0bqk3PAqU9NGzcM5
# MJmEGAxg43CnFu9NJI1nMqC/coi/8PFtrM7HprSwE3H8Jkwncs4ePVT+kZQC+VNQ
# 7EaVkksfEGHlN8XP5+eQDrQ5yT6ve+fbHTLQhwULfeyt0GlQ8h1yewvHCDWo/zw3
# XI1ZyOcNZ2yiaenSUrTPzu0LiqZEJQnzRjPCpgTi1fU08ryEMEaPtr176YDLCguQ
# cpRj4QSZHCrGl/Eo9NlkFP/2rQDKTvCcedKPkYLQtsurSiH/36Oj9YvZycNtZ574
# ortKAtru4YV/rglNX4L8JDhdI+nqvy1liifpJsiS/2KBZDpVFaP8PzGIV40HNy3G
# 8/LVTnaggZaScF3ftHhkg84uQumELS9l2dhsNCL9HqdlrNXLQrVAIR6iuQlpOKBa
# 5S/6h7ZXGOb1qNVQjYp4HCrB7X1KIJYksZ3GdUREf8ot5Ds1FhE=
# =ymmX
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 05:40:52 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230901' of https://github.com/legoater/qemu: (26 commits)
hw/sd: Introduce a "sd-card" SPI variant model
hw/sd: Add sd_cmd_SET_BLOCK_COUNT() handler
hw/sd: Add sd_cmd_SEND_TUNING_BLOCK() handler
hw/sd: Add sd_cmd_SEND_RELATIVE_ADDR() handler
hw/sd: Add sd_cmd_ALL_SEND_CID() handler
hw/sd: Add sd_cmd_SEND_OP_CMD() handler
hw/sd: Add sd_cmd_GO_IDLE_STATE() handler
hw/sd: Add sd_cmd_unimplemented() handler
hw/sd: Add sd_cmd_illegal() handler
hw/sd: Introduce sd_cmd_handler type
hw/sd: Move proto_name to SDProto structure
hw/sd: When card is in wrong state, log which spec version is used
hw/sd: When card is in wrong state, log which state it is
hw/sd/sdcard: Return ILLEGAL for CMD19/CMD23 prior SD spec v3.01
aspeed: Get the BlockBackend of FMC0 from the flash device
m25p80: Introduce an helper to retrieve the BlockBackend of a device
aspeed: Create flash devices only when defaults are enabled
hw/ssi: Check for duplicate CS indexes
aspeed/smc: Wire CS lines at reset
hw/ssi: Introduce a ssi_get_cs() helper
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These machines run reverse-debugging well enough to pass basic tests.
Wire them up.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The reverse-debugging test creates a trace, then replays it and:
1. Steps the first 10 instructions and records their addresses.
2. Steps backward and verifies their addresses match.
3. Runs to (near) the end of the trace.
4. Sets breakpoints on the first 10 instructions.
5. Continues backward and verifies execution stops at the last
breakpoint.
Step 5 breaks if any of the other 9 breakpoints are re-executed in the
trace after the 10th instruction is run, because those will be
unexpectedly hit when reverse continuing. This situation does arise
with the ppc pseries machine, the SLOF bios branches to its own entry
point.
Deal with this by switching steps 3 and 4, so the trace will be run to
the end *or* one of the breakpoints being re-executed. Step 5 then
reverses from there to the 10th instruction will not hit a breakpoint in
between, by definition.
Another step is added between steps 2 and 3, which steps forward over
the first 10 instructions and verifies their addresses, to support this.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This the ppc64 record-replay test is able to replay the full kernel boot
so try enabling it.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
* Check for availablility of more devices in qtests before using them
* Some other minor qtest fixes
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTw5v4RHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbX2DRAAo7NPNPQ2nsYDdYfKAGt8OSg1BHqh1RYH
jvLiU5xrWQ3whmSJYw4rcSyBk4yC+lIjoXT6oBn6O40Q1r7OmrWgtrn9g//3SLHb
Wfob5bZkmRiETDZNFFpYcpRPzElF3ZqIfwOhJ3zfmAQxqeTxpTnAuq2vI38pk3Hz
4pQR/j2IKZFmFt6cdYUaKi32odDK6ySKAFCKy9I8sz2hJgOXQRYBkjorDx+g+hoF
o7DTGkA3uH2xXlLQKhbEGm5xQMlcBgTMb2XeguvRbb7g/Uc046homwm0r6rejDy5
EgW9Kx3Y34QYZt51onqmA57MNNQboubHkSz9W2b57OX+IWA3VRncdBAxdGmubRTY
Jb6LsBZSMdKQBXxgIP3DZjvH6MxYjA9Iy3YI7Mk+hJnDACkFVJOCPxS9acnmjYE5
Nn935GmbYMazfci0c3zc/899hAGDNglD9Tf6ourBjl1WLQstefXhlpzkbGWqSFjF
Tovpal+Rm6KLDFSfs6TsRp6+FF8a6C1k251Ai67adkiCYM/jKwVoiHrsUJeG0vyc
791x5+lixxkLUHu1qNYfEdxvaOE8guhXRt3zJIjmphio3v+RFBLbzC6lTzeZbTTv
DpnnoFJ/tCzdLew7A1QuzuW361ywyKVE4Qp8HQfaJCOJT9aGgMdyoHlpgz0ojgJm
fD8Vfl9GZFQ=
=tZWg
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-08-31' of https://gitlab.com/thuth/qemu into staging
* Use precise selfmodifying code mode on s390x TCG
* Check for availablility of more devices in qtests before using them
* Some other minor qtest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTw5v4RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbX2DRAAo7NPNPQ2nsYDdYfKAGt8OSg1BHqh1RYH
# jvLiU5xrWQ3whmSJYw4rcSyBk4yC+lIjoXT6oBn6O40Q1r7OmrWgtrn9g//3SLHb
# Wfob5bZkmRiETDZNFFpYcpRPzElF3ZqIfwOhJ3zfmAQxqeTxpTnAuq2vI38pk3Hz
# 4pQR/j2IKZFmFt6cdYUaKi32odDK6ySKAFCKy9I8sz2hJgOXQRYBkjorDx+g+hoF
# o7DTGkA3uH2xXlLQKhbEGm5xQMlcBgTMb2XeguvRbb7g/Uc046homwm0r6rejDy5
# EgW9Kx3Y34QYZt51onqmA57MNNQboubHkSz9W2b57OX+IWA3VRncdBAxdGmubRTY
# Jb6LsBZSMdKQBXxgIP3DZjvH6MxYjA9Iy3YI7Mk+hJnDACkFVJOCPxS9acnmjYE5
# Nn935GmbYMazfci0c3zc/899hAGDNglD9Tf6ourBjl1WLQstefXhlpzkbGWqSFjF
# Tovpal+Rm6KLDFSfs6TsRp6+FF8a6C1k251Ai67adkiCYM/jKwVoiHrsUJeG0vyc
# 791x5+lixxkLUHu1qNYfEdxvaOE8guhXRt3zJIjmphio3v+RFBLbzC6lTzeZbTTv
# DpnnoFJ/tCzdLew7A1QuzuW361ywyKVE4Qp8HQfaJCOJT9aGgMdyoHlpgz0ojgJm
# fD8Vfl9GZFQ=
# =tZWg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Aug 2023 15:16:14 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-08-31' of https://gitlab.com/thuth/qemu:
meson: test for CONFIG_TCG in config_all
subprojects/berkeley-testfloat-3: Update to fix a problem with compiler warnings
tests/qtest/bios-tables-test: Check for virtio-iommu device before using it
tests/qtest/netdev-socket: Avoid variable-length array in inet_get_free_port_multiple()
tests/qtest/usb-hcd-xhci-test: Check availability of devices before using them
tests/tcg/s390x: Test precise self-modifying code handling
target/s390x: Define TARGET_HAS_PRECISE_SMC
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch to the latest v8.06 release which introduces interesting
changes for the AST2600 I2C and I3C models. Also take the AST2600 A2
images instead of the default since QEMU tries to model The AST2600 A3
SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented as the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore rename 'bti-crt.inc.c' as 'bti-crt.c.inc'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230606141252.95032-6-philmd@linaro.org>
CONFIG_TCG is not included in *-config-devices.h, so the test is
always failing.
Fixes: 74884cb1a6 ("qtest/meson.build: check CONFIG_TCG for boot-serial-test in qtests_ppc", 2022-03-14)
Fixes: 44d827ea69 ("qtest/meson.build: check CONFIG_TCG for prom-env-test in qtests_ppc", 2022-03-14)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230830095347.132485-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio-iommu device might be missing in the QEMU binary (e.g. in
downstream RHEL builds), so let's better check for its availability first
before using it.
Message-Id: <20230822164948.65187-1-thuth@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use a variable-length array in inet_get_free_port_multiple().
This is only test code called at the start of a test, so switch to a
heap allocation instead.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230824164535.2652070-1-peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "usb-uas" and "usb-ccid" might not be compiled into the QEMU binary,
so let's better check first whether they are available.
Message-Id: <20230822163024.61529-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add small softmmu and user tests to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230807114921.438881-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- enable ccache for gitlab builds
- fix various test info leakages for non V=1
- update style to allow loop vars
- bump FreeBSD to v13.2
- clean-up gdbstub tests
- various gdbstub doc and refactorings
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmTvS2AACgkQ+9DbCVqe
KkRiRwgAhsinp2/KgnvkD0n6deQy/JWg9MfYIvvZacKEakIfQvCDoJ752AUZzUTw
ggQ+W2KuaoHTzwG+AOMLdzulkmspQ8xeFuD2aIpFjRMnZrO9jN2T4L0vcGLAd95c
9QLqPeH8xRdhuK28+ILuYzKOKBcefQ44ufMLpxrS2iNITEsSg/Tw3MU91hbct49g
3OR4bD1ueG5Ib/lXp8V/4GnRmfLdnp3k0i/6OHriq7Mpz4Lia67WblVsPEple66U
n7JCo2sI5/m+6p2tvKs7rH60xc8s1Za3kbK4ggEq3LVRfzVOordZqO+1ep6wklTY
6nP9Ry9nZG3gqCmcNXfhoofm0vHaZA==
=Km9m
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-ominbus-300823-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- enable ccache for gitlab builds
- fix various test info leakages for non V=1
- update style to allow loop vars
- bump FreeBSD to v13.2
- clean-up gdbstub tests
- various gdbstub doc and refactorings
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmTvS2AACgkQ+9DbCVqe
# KkRiRwgAhsinp2/KgnvkD0n6deQy/JWg9MfYIvvZacKEakIfQvCDoJ752AUZzUTw
# ggQ+W2KuaoHTzwG+AOMLdzulkmspQ8xeFuD2aIpFjRMnZrO9jN2T4L0vcGLAd95c
# 9QLqPeH8xRdhuK28+ILuYzKOKBcefQ44ufMLpxrS2iNITEsSg/Tw3MU91hbct49g
# 3OR4bD1ueG5Ib/lXp8V/4GnRmfLdnp3k0i/6OHriq7Mpz4Lia67WblVsPEple66U
# n7JCo2sI5/m+6p2tvKs7rH60xc8s1Za3kbK4ggEq3LVRfzVOordZqO+1ep6wklTY
# 6nP9Ry9nZG3gqCmcNXfhoofm0vHaZA==
# =Km9m
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 30 Aug 2023 10:00:00 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-ominbus-300823-1' of https://gitlab.com/stsquad/qemu:
gdbstub: move comment for gdb_register_coprocessor
gdbstub: replace global gdb_has_xml with a function
gdbstub: refactor get_feature_xml
gdbstub: remove unused user_ctx field
gdbstub: fixes cases where wrong threads were reported to GDB on SIGINT
tests/tcg: clean-up gdb confirm/pagination settings
tests: remove test-gdbstub.py
.gitlab-ci.d/cirrus.yml: Update FreeBSD to v13.2
docs/style: permit inline loop variables
tests/tcg: remove quoting for info output
tests/docker: cleanup non-verbose output
gitlab: enable ccache for many build jobs
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fix is implemented by having the vCont handler set the value of
`gdbserver_state.c_cpu` if any threads are to be resumed. The specific
CPU picked is arbitrarily from the ones to be resumed, but it should
be okay, as all GDB cares about is that it is a resumed thread.
Signed-off-by: Matheus Branco Borella <dark.ryu.550@gmail.com>
Message-Id: <20230804182633.47300-2-dark.ryu.550@gmail.com>
[AJB: style and whitespace fixes]
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1725
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-9-alex.bennee@linaro.org>
We can do this all in the run-test.py script so remove the extraneous
bits from the individual tests which got copied from the original
non-CI gdb tests.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-8-alex.bennee@linaro.org>
This isn't directly called by our CI and because it doesn't run via
our run-test.py script does things slightly differently. Lets remove
it as we have plenty of working in-tree tests now for various aspects
of gdbstub.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-7-alex.bennee@linaro.org>
This avoids ugly multi-line wrapping for the test on non V=1 builds.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-4-alex.bennee@linaro.org>
Even with --quiet docker will spam the sha256 to the console. Avoid
this by redirecting stdout. While we are at it fix the name we echo
which was broken during 0b1a649047 (tests/docker: use direct RUNC call
to build containers).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-3-alex.bennee@linaro.org>
The `ccache` tool can be very effective at reducing compilation times
when re-running pipelines with only minor changes each time. For example
a fresh 'build-system-fedora' job will typically take 20 minutes on the
gitlab.com shared runners. With ccache this is reduced to as little as
6 minutes.
Normally meson would auto-detect existance of ccache in $PATH and use
it automatically, but the way we wrap meson from configure breaks this,
as we're passing in an config file with explicitly set compiler paths.
Thus we need to add $CCACHE_WRAPPERSPATH to the front of $PATH. For
unknown reasons if doing this in msys though, gcc becomes unable to
invoke 'cc1' when run from meson. For msys we thus set CC='ccache gcc'
before invoking 'configure' instead.
A second problem with msys is that cache misses are incredibly
expensive, so enabling ccache massively slows down the build when
the cache isn't well populated. This is suspected to be a result of
the cost of spawning processes under the msys architecture. To deal
with this we set CCACHE_DEPEND=1 which enables ccache's 'depend_only'
strategy. This avoids extra spawning of the pre-processor during
cache misses, with the downside that is it less likely ccache will
find a cache hit after semantically benign compiler flag changes.
This is the lesser of two evils, as otherwise we can't use ccache
at all under msys and remain inside the job time limit.
If people are finding ccache to hurt their pipelines, it can be
disabled by setting the 'CCACHE_DISABLE=1' env variable against
their gitlab fork CI settings.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230804111054.281802-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-2-alex.bennee@linaro.org>
Add testcase which checks that allocations during copy-on-read are
performed on the subcluster basis when subclusters are enabled in target
image.
This testcase also triggers the following assert with previous commit
not being applied, so we check that as well:
qemu-io: ../block/io.c:1236: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230711172553.234055-4-andrey.drobyshev@virtuozzo.com>
This is a regression test for
https://bugzilla.redhat.com/show_bug.cgi?id=2234374.
All this test needs to do is trigger an I/O error inside of file-posix
(specifically raw_co_prw()). One reliable way to do this without
requiring special privileges is to use a FUSE export, which allows us to
inject any error that we want, e.g. via blkdebug.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-6-hreitz@redhat.com>
[hreitz: Fixed test to be skipped when there is no FUSE support, to
suppress fusermount's allow_other warning, and to be skipped
with $IMGOPTSSYNTAX enabled]
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
enum ThrottleDirection is already there, use ThrottleDirection instead
of 'bool is_write' for throttle API, also modify related codes from
block, fsdev, cryptodev and tests.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-7-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-5-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Use enum ThrottleDirection instead in the throttle test codes.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-3-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Instead of having CI pick tomli from the vendored wheel at configure
time, place it in the containers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit e8e4298fea.
ensuregroup allows to specify both the acceptable versions of avocado,
and a locked version to be used when avocado is not installed as a system
pacakge. This lets us install avocado in pyvenv/ using "mkvenv.py" and
reuse the distro package on Fedora and CentOS Stream (the only distros
where it's available).
ensuregroup's usage of "(>=..., <=...)" constraints when evaluating
the distro package, and "==" constraints when installing it from PyPI,
makes it possible to avoid conflicts between the known-good version and
a package plugins included in the distro.
This is because package plugins have "==" constraints on the version
that is included in the distro, and, using "pip install avocado==88.1"
on a venv that includes system packages will result in an error:
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
But at the same time, if the venv does not include a system distribution
of avocado then we can install a known-good version and stick to LTS
releases.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1663
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This brings in a newer version of the pipewire mapping, so rename it.
Python 3.9 and 3.10 do not seem to work in OpenSUSE LEAP 15.5 (weird,
because 3.9 persisted from 15.3 to 15.4) so bump the Python runtime
version to 3.11.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the release of version 12 on June 10, 2023, Debian 10 is
not supported anymore. Modify the cross compiler container to
build on a newer version.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230804233748.218935-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230807163459.849766-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230804235624.263260-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Exercise the DETECT mechanism of the GPIO peripheral.
Signed-off-by: Chris Laplante <chris@laplante.io>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230728160324.1159090-7-chris@laplante.io
[PMM: fixed coding style nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds qtest_irq_intercept_out_named method, which utilizes a new optional
name parameter to the irq_intercept_out qtest command.
Signed-off-by: Chris Laplante <chris@laplante.io>
Message-id: 20230728160324.1159090-4-chris@laplante.io
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without -S we run into potential races with tests starting before the
gdbstub attaches. We don't need to worry about user-mode as enabling
the gdbstub implies we wait for the initial connection.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-7-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.
If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This test fails when host page size != guest page size,
because qemu may not be able to directly map the file.
Fixes: a634148269 ("tests/tcg: Add a test for info proc mappings")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expected change is that _ADR object is removed from
hostbridge descriptor in DSDT for PC and Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following change is expected on each PCI slot with enabled
ACPI PCI hotplug
- BSEL,
- ASUN
+ Zero,
+ Zero
}
+ Local0 [Zero] = BSEL /* \_SB_.PCI0.BSEL */
+ Local0 [One] = ASUN /* \_SB_.PCI0.S18_.ASUN */
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230731091042.139159-2-akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The Postcopy preempt capability is expected to be set before incoming
starts, so change the postcopy tests to start with deferred incoming and
call migrate-incoming after the cap has been set.
Why the existing tests (without this patch) didn't fail?
There could be two reasons:
1) "backlog" specifies the number of pending connections. As long as the
server accepts the connections faster than the clients side connecting,
connection will succeed. For the preempt test, it uses only 2 channels,
so very likely to not have pending connections.
2) per my tests (on kernel 6.2), the number of pending connections allowed
is actually "backlog + 1", which is 2 in this case.
That said, the implementation of socket_start_incoming_migration_internal
expects "migrate defer" to be used, and for safety, change the test to
work with the expected usage.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-3-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
And it needs to be in both source and target, so put it on arch_opts.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-7-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will contain the options needed for both source and target.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It makes no sense that we don't have the same configuration on both sides.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20230608224943.3877-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The virtio-gpu test is known to be flaky - that's why we also did
not enable the test_s390x_fedora in the gitlab CI. However, a flaky
test can also be annoying when testing locally, so let's rather skip
this subtest by default and start running the test_s390x_fedora test
in the gitlab CI again (since the other things that are tested here
are quite valuable).
Message-Id: <20230724084851.24251-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests from tests/avocado/migration.py do not work at all
on s390x - the bios shuts down immediately when it cannot find
a boot disk, so there is nothing left to migrate here. For doing
a proper migration test, we would need a proper payload, but we
already do such tests in the migration *qtest*, so it is unnecessary
to redo such a test here, thus let's simply remove this test.
Message-Id: <20230721164346.10112-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-15-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-14-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-13-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-11-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-10-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-9-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test fails occasionally, see e.g.:
https://gitlab.com/thuth/qemu/-/jobs/4196177756#L489https://gitlab.com/thuth/qemu/-/jobs/4623296271#L290
It also fails on my laptop in ca. 50% of all runs. Thus disable it by
default by using the QEMU_TEST_FLAKY_TESTS environment variable to fence
it (which we also already use in flaky qtests). While we're at it, also
document this variable in docs/devel/testing.rst.
Message-Id: <20230710170155.7192-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Get an up-to-date package list from lcitool, that way we
don't need to manually keep this array in sync.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Inspired-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230711144922.67491-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the get_qemu_packages_from_lcitool_json() helper which return
such package list from a lcitool env var file in JSON format.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230711144922.67491-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Refresh the generated files by running:
$ make lcitool-refresh
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230711144922.67491-3-philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Drop changes to libpmem-dev and libxen-dev]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the generate_pkglist() helper to generate a list of packages
required by a distribution to build QEMU.
Since we can not add a "THIS FILE WAS AUTO-GENERATED" comment in
JSON, create the files under tests/vm/generated/ sub-directory;
add a README mentioning the files are generated.
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230711144922.67491-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This wasn't noticed because the test is currently disabled.
Fixes: 02f56e3de ("tests/qtest: massively speed up migration-test")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230711212131.2370-1-farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
=RsOh
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
vdpa: Avoid forwarding large CVQ command failures
vdpa: Accessing CVQ header through its structure
vhost: Fix false positive out-of-bounds
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
vdpa: Restore MAC address filtering state
vdpa: Use iovec for vhost_vdpa_net_load_cmd()
pcie: Specify 0 for ARI next function numbers
pcie: Use common ARI next function number
include/hw/virtio: document some more usage of notifiers
include/hw/virtio: add kerneldoc for virtio_init
include/hw/virtio: document virtio_notify_config
hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
include/hw: document the device_class_set_parent_* fns
include: attempt to document device_class_set_props
vdpa: Fix possible use-after-free for VirtQueueElement
pcie: Add hotplug detect state register to cmask
virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The test attaches a SCSI controller to a non-zero slot and a pcie-to-pci bridge
on slot 0 on the same pcie-root-port. Since a downstream device can be attached
to a pcie-root-port only on slot 0, the above test configuration is not allowed.
Additionally using pcie.0 as id for pcie-to-pci bridge is incorrect as that id
is reserved only for the root bus.
In the test scenario, there is no need to attach a pcie-root-port to the
root complex. A SCSI controller can be attached to a pcie-to-pci bridge
which can then be directly attached to the root bus (pcie.0).
Fix the test and simplify it.
CC: mst@redhat.com
CC: imammedo@redhat.com
CC: Michael Labiuk <michael.labiuk@virtuozzo.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230705115925.5339-5-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIE ports only have one slot, slot 0. Hence, non-zero slots are not available
for PCIE devices on PCIE root ports. Fix test_acpi_q35_tcg_no_acpi_hotplug()
so that the test does not use them.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-3-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to fix bio-tables-test in the next patch and hence need to
make sure the acpi tests continue to pass.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-2-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----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=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't have a virtio-scmi implementation in QEMU and only support a
vhost-user backend. This is very similar to virtio-gpio and we add the same
set of tests, just passing some vhost-user messages over the control socket.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230628100524.342666-4-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The migration test cases that actually exercise live migration want to
ensure there is a minimum of two iterations of pre-copy, in order to
exercise the dirty tracking code.
Historically we've queried the migration status, looking for the
'dirty-sync-count' value to increment to track iterations. This was
not entirely reliable because often all the data would get transferred
quickly enough that the migration would finish before we wanted it
to. So we massively dropped the bandwidth and max downtime to
guarantee non-convergance. This had the unfortunate side effect
that every migration took at least 30 seconds to run (100 MB of
dirty pages / 3 MB/sec).
This optimization takes a different approach to ensuring that a
mimimum of two iterations. Rather than waiting for dirty-sync-count
to increment, directly look for an indication that the source VM
has dirtied RAM that has already been transferred.
On the source VM a magic marker is written just after the 3 MB
offset. The destination VM is now montiored to detect when the
magic marker is transferred. This gives a guarantee that the
first 3 MB of memory have been transferred. Now the source VM
memory is monitored at exactly the 3MB offset until we observe
a flip in its value. This gives us a guaranteed that the guest
workload has dirtied a byte that has already been transferred.
Since we're looking at a place that is only 3 MB from the start
of memory, with the 3 MB/sec bandwidth, this test should complete
in 1 second, instead of 30 seconds.
Once we've proved there is some dirty memory, migration can be
set back to full speed for the remainder of the 1st iteration,
and the entire of the second iteration at which point migration
should be complete.
On a test machine this further reduces the migration test time
from 8 minutes to 1 minute 40.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-11-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
clang does not support expressions involving symbols in instructions
like lghi yet, so building hello-s390x-asm.S with it fails.
Move the expression to the literal pool and load it from there.
Fixes: be4a4cb429 ("tests/tcg/s390x: Test single-stepping SVC")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230707154242.457706-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test that we can successfully parse the docs/config/q35-emulated.cfg,
docs/config/q35-virtio-graphical.cfg and docs/config/q35-virtio-serial.cfg
config files (the "...-serial.cfg" file is a subset of the graphical
config file, so we skip that in quick mode).
These config files use two hard-coded image names which we have to
replace with unique temporary files to avoid race conditions in case
the tests are run in parallel. So after creating the temporary image
files, we also have to create a copy of the config file where we
replaced the hard-coded image names.
If KVM is not available, we also have to disable the "accel" lines.
Once everything is in place, we can start QEMU with the modified
config file and check that everything is available in QEMU.
Message-Id: <20230704071655.75381-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These two functions can be useful for other qtests beside the
qos-test, too, so move them to libqtest instead.
Message-Id: <20230704071655.75381-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make test_x86_memdev_resp() more flexible by allowing arbitrary
memory sizes as parameter here.
Message-Id: <20230704071655.75381-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-13-iii@linux.ibm.com>
[thuth: Apply fix for compiling with GCC 11]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230704081506.276055-11-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-10-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-9-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add some simple tests of the watchdog timer in the always-on domain device
of HiFive 1 rev b.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627141216.3962299-4-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 32-bit Spike boot issue has been fixed in the OpenSBI v1.3.
Let's enable the 32-bit Spike OpenSBI boot testing.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230630160717.843044-2-bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use a shared driver and backends for i386, aarch64, ppc64, riscv64.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add basic chip and core xscom tests for powernv10 machine, equivalent
to tests for powernv8 and 9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230706053923.115003-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This copies ppc_pseries.py to start a set of powernv tests, including
a Linux boot test for the newly added SMT mode.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The powernv machine can boot Linux to VFS mount with icount enabled.
Add a test case for it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230625103700.8992-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Following are done to fix the coverity issues:
1. Change read_data to fix the CID 1512899: Out-of-bounds access (OVERRUN)
2. Fix match_rx_tx_data to fix CID 1512900: Logically dead code (DEADCODE)
3. Replace rand() in generate_random_data() with g_rand_int()
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Message-id: 20230628202758.16398-1-vikram.garhwal@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.
The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some assemblers will complain about attempts to access
id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test
binary isn't built for the right processor type:
/tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1'
/tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1'
However, these registers are in the ID space and are guaranteed to
read-as-zero on older CPUs, so the access is both safe and sensible.
Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1
and ID_AA64MMFR2_EL1. This allows us to drop the HAS_ARMV9_SME check
and the makefile machinery to adjust the CFLAGS for this test, so we
don't rely on having a sufficiently new compiler to be able to check
these registers.
This means we're actually testing the SME ID register: no released
GCC yet recognizes -march=armv9-a+sme, so that was always skipped.
It also avoids a future problem if we try to switch the "do we have
SME support in the toolchain" check from "in the compiler" to "in the
assembler" (at which point we would otherwise run into the above
errors).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-9-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-39-alex.bennee@linaro.org>
It was hard to track down this leak as it was an internal allocation
by glib and the backtraces did not give much away. The autofree was
freeing the allocation with g_free() but not taking care of the
individual strings. They should have been freed with g_strfreev()
instead.
Searching the glib source code for the correct string free function
led to:
G_DEFINE_AUTO_CLEANUP_FREE_FUNC(GStrv, g_strfreev, NULL)
and indeed if you read to the bottom of the documentation page you
will find:
typedef gchar** GStrv;
A typedef alias for gchar**. This is mostly useful when used together with g_auto().
So fix up all the g_autofree g_strsplit case that smugly thought they
had de-allocation covered.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-21-alex.bennee@linaro.org>
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
The test_arm_bpim2u_gmac test sometimes fails (ca. 1 out of 20 runs
here) since the disk shows up as /dev/mmcblk1 instead of /dev/mmcblk0
in some runs. No matter of the name in /dev, the major:minor encoding
seems always to be the same, so we can fix this issue by using the
correct major:minor hex number in the "root=" parameter instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230630161604.446394-1-thuth@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-18-alex.bennee@linaro.org>
Update prebuilt firmware images to have TF-A with FEAT_FGT support
enabled. This allowed us to enable test for "max" cpu in sbsa-ref
machine.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <20230530152240.79160-1-marcin.juszkiewicz@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-17-alex.bennee@linaro.org>
We still need to base this on Debian Sid until riscv64 is promoted to
a release architecture (or another distro provides a full cross
compile target). We use the new qemu-minimal project description to
avoid bringing in all the extra dependencies because every extra
package is another chance for sid to fail.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-16-alex.bennee@linaro.org>
This is a very bare bones set of dependencies for a minimal build of
QEMU. This will be useful for minimal cross-compile sanity check based
on things like Debian Sid where stuff isn't always in sync.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-15-alex.bennee@linaro.org>
We need a native compiler to build the hexagon codegen tools. In our
current images we already have a gcc as a side effect of a broken
dependency between gcovr and lcov but this will be fixed when we move
to bookworm. See
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=987818 for details.
Update the packages while we are at it.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-14-alex.bennee@linaro.org>
We need this for the riscv64 and gcc-native mappings. As the older
alpine release has been dropped from the mappings we also need to bump
the version of alpine we use.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-12-alex.bennee@linaro.org>
Running the fuzzer requires some hoop jumping and some problems only
show up in containers. This basically replicates the build-oss-fuzz
job from our CI so we can run in the same containers we use in CI.
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-10-alex.bennee@linaro.org>
An update to the clang tooling detects more issues with the code
including a memory leak from the g_string_new() allocation. Clean up
the code to avoid the allocation and use ARRAY_SIZE while we are at
it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-9-alex.bennee@linaro.org>
We recently missed a regression that should have been picked up by
check-tcg. This was because the libmem plugin is effectively a NOP if
the user doesn't specify the type to use.
Rather than changing the default behaviour add an additional expansion
so we can take this into account in future.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-6-alex.bennee@linaro.org>
Test for invalid, integer overflow, and inexact.
Test for proper result, modulo 2**64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230527141910.1885950-3-richard.henderson@linaro.org>
Add migration switchover ack capability test. The test runs without
devices that support this capability, but is still useful to make sure
it didn't break anything.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The stack array is only referenced from the start-up code (which is
shared between the s390-ccw.img and the s390-netboot.img), but it is
currently declared twice, once in main.c and once in netmain.c.
It makes more sense to declare this in start.S instead - which will
also be helpful in the next patch, since we need to mention the .bss
section in start.S in that patch.
While we're at it, let's also drop the huge alignment of the stack,
since there is no technical requirement for aligning it to page
boundaries.
Message-Id: <20230627074703.99608-4-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Re-enable the graph lock
- More fixes to coroutine_fn marking
-----BEGIN PGP SIGNATURE-----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=ZQcP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Re-enable the graph lock
- More fixes to coroutine_fn marking
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmScQCQRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9bNSA//WIzPT45rFhl2U9QgyOJu26ho6ahsgwgI
# Z3QM5kCDB1dAN9USRPxhGboLGo8CyY7eeSwSrR7RtwBGYrWrAoJfGp5gK/7d9s5Q
# o0AGgRPnJGhFkBhRRMytsDsewM6Kk4IRmk4HMK3cOH3rsSM8RHs6KmDSBKesllu0
# QVGf3qW4u8LHyZyGM5OlPVUbtuDuK6/52FGhpXBp+x4oyNegOhjwO4mGOvTG+xIk
# Q5zwWZaPfjxaEDkvW8iahB6/D7Tpt64BmMf1Ydhxcd5eKEp932CiBI36aAlNKoRD
# Al5wztRx1GEh12ekN39jIi7Ypp3JX26keJcieKU0q656pT551UFRYjU0Rk08/Cca
# qv2oiQDu6bHgQ9zCQ1nMfa9+K2MyBwx0b5qfYkvs2RzgCTl8ImgBQANHfw8tz6Bq
# HUo1zsFBXCaK0boUB5iFwdf3rlx3t9UTEuDej/RaHqZjZD5xeG/smCcOlSfHaKUa
# wXfYxvm8ZfefJn1D6io1A+7M956uvIQNtmh13cU44clgFX9Y/bBNMg/5lMRsJKo8
# xxjvqCAyxo/pPfUsVWx4pc8AXbfVa85gyoSiaLEYZnqP54sJ2lFccqykCsTy58Lo
# VDcoPnoSc+LNqBOvtzxXgQbEWFCXU6fe0+TZgVYUvExWFIAOImeDWg2GD1JVrwsX
# e9QrPhL3DXg=
# =ZQcP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Jun 2023 04:13:56 PM CEST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (23 commits)
block: use bdrv_co_debug_event in coroutine context
block: use bdrv_co_getlength in coroutine context
qcow2: mark more functions as coroutine_fns and GRAPH_RDLOCK
vhdx: mark more functions as coroutine_fns and GRAPH_RDLOCK
vmdk: mark more functions as coroutine_fns and GRAPH_RDLOCK
dmg: mark more functions as coroutine_fns and GRAPH_RDLOCK
cloop: mark more functions as coroutine_fns and GRAPH_RDLOCK
block: mark another function as coroutine_fns and GRAPH_UNLOCKED
bochs: mark more functions as coroutine_fns and GRAPH_RDLOCK
vpc: mark more functions as coroutine_fns and GRAPH_RDLOCK
qed: mark more functions as coroutine_fns and GRAPH_RDLOCK
file-posix: remove incorrect coroutine_fn calls
Revert "graph-lock: Disable locking for now"
graph-lock: Unlock the AioContext while polling
blockjob: Fix AioContext locking in block_job_add_bdrv()
block: Fix AioContext locking in bdrv_open_backing_file()
block: Fix AioContext locking in bdrv_open_inherit()
block: Fix AioContext locking in bdrv_reopen_parse_file_or_backing()
block: Fix AioContext locking in bdrv_attach_child_common()
block: Fix AioContext locking in bdrv_open_child()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
blk_insert_bs() requires that callers hold the AioContext lock for the
node that should be inserted. Take it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-4-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a better regression test for the bugs hidden by commit 80fc5d26
('graph-lock: Disable locking for now'). With that commit reverted, it
hangs instantaneously and reliably for me.
It is important to have a reliable test like this, because the following
commits will set out to fix the actual root cause of the deadlocks and
then finally revert commit 80fc5d26, which was only a stopgap solution.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Used in the following test on win32, to share sockets with the QEMU
process.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230606115658.677673-7-marcandre.lureau@redhat.com>
TBStats will be introduced to replace CONFIG_PROFILER totally, here
remove all CONFIG_PROFILER related stuffs first.
Signed-off-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230607122411.3394702-2-fei2.wu@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a perfectly natural occurrence for x86 "rep movb",
where the "rep" prefix forms a counted loop of the one insn.
During the tests/tcg/multiarch/memory test, this logging is
triggered over 350000 times. Within the context of cross-i386-tci
build, which is already slow by nature, the logging is sufficient
to push the test into timeout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc
Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
+ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
=Do8p
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc
Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
# +ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
# N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
# iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
# 7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
# x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
# =Do8p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 03:50:09 PM CEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is present
vhost_net: add an assertion for TAP client backends
intel_iommu: Fix address space unmap
intel_iommu: Fix flag check in replay
intel_iommu: Fix a potential issue in VFIO dirty page sync
vhost-user: fully use new backend/frontend naming
virtio-scsi: avoid dangling host notifier in ->ioeventfd_stop()
hw/i386/pc: Clean up pc_machine_initfn
vdpa: fix not using CVQ buffer in case of error
vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devices
vhost: fix vhost_dev_enable_notifiers() error case
vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQ
vdpa: Add vhost_vdpa_net_load_offloads()
virtio-net: expose virtio_net_supported_guest_offloads()
hw/net/virtio-net: make some VirtIONet const
vdpa: reuse virtio_vdev_has_feature()
include/hw/virtio: make some VirtIODevice const
vdpa: map shadow vrings with MAP_SHARED
vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len function
vdpa: do not block migration if device has cvq and x-svq=on
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Switching to SMBIOS3.0 by default shifts some addresses, so we get this
change in tests/data/acpi/q35/SSDT.dimmpxm :
@@ -389,6 +389,6 @@
}
}
- Name (MEMA, 0x07FFE000)
+ Name (MEMA, 0x07FFF000)
}
update the expected file to match.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, pc-q35 and pc-i44fx machine models are default to use SMBIOS 2.8
(32-bit entry point). Since SMBIOS 3.0 (64-bit entry point) is now fully
supported since QEMU 7.0, default to use SMBIOS 3.0 for newer machine
models. This is necessary to avoid the following message when launching
a VM with large number of vcpus.
"SMBIOS 2.1 table length 66822 exceeds 65535"
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230607205717.737749-2-suravee.suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
* Add msys2 gitlab-CI artifacts
* Minor qtest fixes
-----BEGIN PGP SIGNATURE-----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=4Jl2
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-06-26' of https://gitlab.com/thuth/qemu into staging
* Improve gitlab-CI with regards to handling of stable staging branches
* Add msys2 gitlab-CI artifacts
* Minor qtest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmSZR6gRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWoFQ//VieL2UTOBXvw6TlMCYEpqKURdKYc7Uqp
# Y/gJRHK+EQ3C4BGzv8l/P07/H3N5da+8Y2Ta37tNritbs+tyrYVIQAY3+bugG6hO
# lIF5oUGTcbOkC6Z1ajtjHcmxCj+2Z8uumlFW44zMR4HzzcmaRDyVDoU0gUg0Ohkt
# aNdpjJEA8BRzvQTjx92v31uILk8zpd0yL+40p/2DSx0Dt5eoqTjFN4QCgqk+C9A3
# WiiIkJBIIPgfp3XScVGeKS2ZfGSL7/QcJF0wbkkLhWfuF5oBjjkQCJlGYxpAnnbv
# J7esrNCxsks7T7SC/QnEzyePMXxX1DgV9znwBtEobLTQ38LcDWpdqdr0VYgyQhdo
# 9NgBLNkI3J1JCmJ5amCLRNcmH75cMnhxXeZYsjZ70VnirgFEQS1C+YELadCY8QWa
# S3YS/ZvOc5wHFdTrsfIyJG+2AjbefyboiXojzd/sFEY0485A8malTdtn96dhHjkZ
# KvInxQHV7uoUhok1QC68taMHbRUfA6jU7STYjkgDjnf+L+ywIbbKJE7LpyicvnsU
# MUR+9H4EsSlmN2koc9bopG0sspLThviIKORqzPEo3WyBj5jCIZ7tkvUEqBUkJwx2
# hISZeqdhP+wRVR4Ter0RNywjk2gSbaYcPzlnbaRYZ5OoiRchXr+uh/X0dIdkCNPP
# YwB1Y0wBpPU=
# =4Jl2
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 10:09:12 AM CEST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-06-26' of https://gitlab.com/thuth/qemu:
tests/qtest/cxl-test: Clean up temporary directories after testing
gitlab-ci: add msys2 meson test to junit report
gitlab-ci: grab msys2 meson-logs as artifacts
gitlab: support disabling job auto-run in upstream
gitlab: avoid extra pipelines for tags and stable branches
gitlab: stable staging branches publish containers in a separate tag
gitlab: allow overriding name of the upstream repository
gitlab: centralize the container tag name
tests/qtest: Fix a comment typo in vhost-user-test.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's good style to clean up temporary directories when they
are not needed anymore.
Message-Id: <20230622114132.372898-1-thuth@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230621101710.297975-4-mzamazal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
VOF is the new lightweight fast pseries bios. Add a Linux boot test
using VOF.
More tests could be moved to use VOF becasue it's much faster, but
just dip one toe in the water first here. SLOF should continue to be
tested too.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add mult-thread/core/socket Linux boot tests that ensure the right
topology comes up. Of particular note is a SMT test, which is a new
capability for TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This machine can boot Linux to VFS mount, so don't stop in early boot.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Like existing xen machines, xenpvh also cannot be used for qtest.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The ppc64 tuxrun tests are currently failing if "slirp" has been
disabled in the binary since they are using "-netdev user" now.
We have to skip the test if this network backend is missing.
Fixes: 6ee3624236 ("improve code coverage for ppc64")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230606192802.666000-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
- Add simple tests written in C
-----BEGIN PGP SIGNATURE-----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=5m1P
-----END PGP SIGNATURE-----
Merge tag 'pull-tricore-20230607' of https://github.com/bkoppelmann/qemu into staging
- Refactor PCXI/ICR field handling in newer ISA versions
- Add simple tests written in C
# -----BEGIN PGP SIGNATURE-----
#
# iQJTBAABCgA9FiEEbmNqfoPy3Qz6bm43CtLGOWtpyhQFAmSArqkfHGtiYXN0aWFu
# QG1haWwudW5pLXBhZGVyYm9ybi5kZQAKCRAK0sY5a2nKFKKTD/0dXpexGX7K62d4
# dLZwj9AHOa/9NOD4E6+ub2UYovF7UlydSzy+mgJyxiIUGaPBHYe3dFfktHOppSwn
# OGJp9TTqeutpXYF8/zvDnmf+TDJ71DRQWM40uC0HAUXrjUO43PiK0LMh+fm5D9uG
# vRHSDGBWUNZrNxTZSj8Kx7Sb7PkqeB8qWvpIJh1AVVhIT+dyoAp5V7EkAETpwhtz
# a7qKclQpFNWdaYnthCF5wcmoMawQKMUnO96j0lQWIXfnhDP7XmrWlNM7Ry2cMPEy
# aRxAT3hTOr2dD2Cic8brF/w1NeXJjxWDz65uD7X7Rog54+SD4+SmfZiYwdAs5YMo
# 1XTkbG0qE6HwrtaO+nZDQZFc8tdvLSlDcBd/cjOonwxJyvJVX8qjR2Ufb3PSfTct
# 85R5wRBsEapSbQwicwu71fK0N8ZVkLM3fc4nFEKMxOx8I66eJm3bcTxpT/A8knEw
# OwykEVB3Xiq45JlWOV2BkyZJ1EiHeFQzZfzckW4bYFDdCnuMHlaVG9qpKEAu7mQh
# 4Ug3Y4KhYqZA0UDHG6Ik6Ms64FYU4s+zbFYic/Jhew9NC4MoMXa8oKqXJC5W7RCl
# 1HesyBPu1i/45Xk6/kneJ16YO+i4hcH+Hp/osJrRE6qFHGtbvKJ0EFy1471YHyLf
# HjRQBmsd9XW2TaYBQgST80UvCh9CkQ==
# =5m1P
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 07 Jun 2023 09:22:01 AM PDT
# gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg: issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14
* tag 'pull-tricore-20230607' of https://github.com/bkoppelmann/qemu:
tests/tcg/tricore: Add recursion test for CSAs
target/tricore: Fix wrong PSW for call insns
target/tricore: Refactor PCXI/ICR register fields
tests/tcg/tricore: Add first C program
tests/tcg/tricore: Uses label for memory addresses
tests/tcg/tricore: Move asm tests into 'asm' directory
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
this allows us to exercise the startup code used by GCC to call main().
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-4-kbastian@mail.uni-paderborn.de>
the linker might rearrange sections, so lets reference memory by label
name instead of addr + off.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-3-kbastian@mail.uni-paderborn.de>
this seperates these tests from the upcoming tests written in C.
Also rename the compiled test to 'test_<foo>.asm.tst'.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-2-kbastian@mail.uni-paderborn.de>
The event is racy: it will not appear in the output if bitmap is
migrated during downtime period of migration and postcopy phase is not
started.
Fixes: ae00aa2398 "iotests: 194: test also migration of dirty bitmap"
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230607143606.1557395-1-vsementsov@yandex-team.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tests/fp/berkeley-softfloat-3 and tests/fp/berkeley-testfloat-3
have been replaced by subprojects, so remove the now-unnecessary
submodules.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini