The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
Implement a model of the Neoverse N2 CPU. This is an Armv9.0-A
processor very similar to the Cortex-A710. The differences are:
* no FEAT_EVT
* FEAT_DGH (data gathering hint)
* FEAT_NV (not yet implemented in QEMU)
* Statistical Profiling Extension (not implemented in QEMU)
* 48 bit physical address range, not 40
* CTR_EL0.DIC = 1 (no explicit icache cleaning needed)
* PMCR_EL0.N = 6 (always 6 PMU counters, not 20)
Because it has 48-bit physical address support, we can use
this CPU in the sbsa-ref board as well as the virt board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230915185453.1871167-3-peter.maydell@linaro.org
Correct a couple of minor errors in the Cortex-A710 definition:
* ID_AA64DFR0_EL1.DebugVer is 9 (indicating Armv8.4 debug architecture)
* ID_AA64ISAR1_EL1.APA is 5 (indicating more PAuth support)
* there is an IMPDEF CPUCFR_EL1, like that on the Neoverse-N1
Fixes: e3d45c0a89 ("target/arm: Implement cortex-a710")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230915185453.1871167-2-peter.maydell@linaro.org
FEAT_HPMN0 is a small feature which defines that it is valid for
MDCR_EL2.HPMN to be set to 0, meaning "no PMU event counters provided
to an EL1 guest" (previously this setting was reserved). QEMU's
implementation almost gets HPMN == 0 right, but we need to fix
one check in pmevcntr_is_64_bit(). That is enough for us to
advertise the feature in the 'max' CPU.
(We don't need to make the behaviour conditional on feature
presence, because the FEAT_HPMN0 behaviour is within the range
of permitted UNPREDICTABLE behaviour for a non-FEAT_HPMN0
implementation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230921185445.3339214-1-peter.maydell@linaro.org
Enable FEAT_MOPS on the AArch64 'max' CPU, and add it to
the list of features we implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230912140434.1333369-13-peter.maydell@linaro.org
FEAT_HBC (Hinted conditional branches) provides a new instruction
BC.cond, which behaves exactly like the existing B.cond except
that it provides a hint to the branch predictor about the
likely behaviour of the branch.
Since QEMU does not implement branch prediction, we can treat
this identically to B.cond.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cortex-a710 is a first generation ARMv9.0-A processor.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230831232441.66020-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have cpu properties to adjust the pauth algorithm for the
purpose of speed of emulation. Retain the set of pauth features
supported by the cpu even as the algorithm changes.
This already affects the neoverse-v1 cpu, which has FEAT_EPAC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a mandatory feature for Armv8.1 architectures but we don't
state the feature clearly in our emulation list. Also include
FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org
Cc: qemu-stable@nongnu.org
Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org>
[PMM: pluralize 'instructions' in docs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature allows the operating system to set TCR_ELx.HWU*
to allow the implementation to use the PBHA bits from the
block and page descriptors for for IMPLEMENTATION DEFINED
purposes. Since QEMU has no need to use these bits, we may
simply ignore them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is only one additional EL1 register modeled, which
also needs to use access_actlr_w.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Access to many of the special registers is enabled or disabled
by ACTLR_EL[23], which we implement as constant 0, which means
that all writes outside EL3 should trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not hard-code the constants for Neoverse V1.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230811214031.171020-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously we hard-coded the blocksize with GMID_EL1_BS.
But the value we choose for -cpu max does not match the
value that cortex-a710 uses.
Mirror the way we handle dcz_blocksize.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230811214031.171020-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add an x-rme cpu property to enable FEAT_RME.
Add an x-l0gptsz property to set GPCCR_EL3.L0GPTSZ,
for testing various possible configurations.
We're not currently completely sure whether FEAT_RME will
be OK to enable purely as a CPU-level property, or if it will
need board co-operation, so we're making these experimental
x- properties, so that the people developing the system
level software for RME can try to start using this and let
us know how it goes. The command line syntax for enabling
this will change in future, without backwards-compatibility.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
move the module containing cpu models definitions
for 32bit TCG-only CPUs to tcg/ and rename it for clarity.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-8-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the 64-bit CPUs that are TCG-only:
- cortex-a35
- cortex-a55
- cortex-a72
- cortex-a76
- a64fx
- neoverse-n1
Keep the CPUs that can be used with KVM:
- cortex-a57
- cortex-a53
- max
- host
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-6-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell