* Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file.
* Use those newly defined named constants whenever possible.
* Standardize the way we init a familly of unimplemented devices
- SAI
- PWM
- CAN
* Add/rework few comments
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device.
In particular, register 22 is not present on i.MX6UL and this is actualy
The only register that is really emulated in the i.MX7 IOMUX GPR device.
Note: The i.MX6UL code is actually also implementing the IOMUX GPR device
as an unimplemented device at the same bus adress and the 2 instantiations
were actualy colliding. So we go back to the unimplemented device for now.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to use virtio backends we need to initialize RAM for the
xen-mapcache (which is responsible for mapping guest memory using foreign
mapping) to work. Calculate and add hi/low memory regions based on
machine->ram_size.
Use the constants defined in public header arch-arm.h to be aligned with the xen
toolstack.
While using this machine, the toolstack should then pass real ram_size using
"-m" arg. If "-m" is not given, create a QEMU machine without IOREQ and other
emulated devices like TPM and VIRTIO. This is done to keep this QEMU machine
usable for /etc/init.d/xencommons.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
In order to use virtio backends we need to allocate virtio-mmio
parameters (irq and base) and register corresponding buses.
Use the constants defined in public header arch-arm.h to be
aligned with the toolstack. So the number of current supported
virtio-mmio devices is 10.
For the interrupts triggering use already existing on Arm
device-model hypercall.
The toolstack should then insert the same amount of device nodes
into guest device-tree.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
On MIPS, kvm_arch_get_default_type() returns a negative value when an
error occurred so handle the case. Also, let other machines return
negative values when errors occur and declare returning a negative
value as the correct way to propagate an error that happened when
determining KVM type.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-5-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity points out (CID 1513106, 1513107) that MemoryListener is a
192 byte struct which we are passing around by value. Switch to
passing a const pointer into xen_register_ioreq() and then to
xen_do_ioreq_register(). We can also make the file-scope
MemoryListener variables const, since nothing changes them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230718101057.1110979-1-peter.maydell@linaro.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The implementation of the SMMUv3 has multiple places where it reads a
data structure from the guest and directly operates on it without
doing a guest-to-host endianness conversion. Since all SMMU data
structures are little-endian, this means that the SMMU doesn't work
on a big-endian host. In particular, this causes the Avocado test
machine_aarch64_virt.py:Aarch64VirtMachine.test_alpine_virt_tcg_gic_max
to fail on an s390x host.
Add appropriate byte-swapping on reads and writes of guest in-memory
data structures so that the device works correctly on big-endian
hosts.
As part of this we constrain queue_read() to operate only on Cmd
structs and queue_write() on Evt structs, because in practice these
are the only data structures the two functions are used with, and we
need to know what the data structure is to be able to byte-swap its
parts correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230717132641.764660-1-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
This extends the slots of xhci to 64, since the default xhci_sysbus
just supports one slot.
Signed-off-by: Wang Yuquan <wangyuquan1236@phytium.com.cn>
Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230710063750.473510-2-wangyuquan1236@phytium.com.cn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's use our new helper functions. Note that virtio-pmem-pci is not
enabled for arm and, therefore, not compiled in.
Message-ID: <20230711153445.514112-4-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's use our new helper. We'll add the subregion to system RAM now
earlier. That shouldn't matter, because the system RAM memory region should
already be alive at that point.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-4-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
virt-acpi-build.c uses warn_report. However, it doesn't include
qemu/error-report.h directly, it include qemu/error-report.h via trace.h
if we enable log trace backend. But if we disable the log trace backend
(e.g., --enable-trace-backends=nop), then virt-acpi-build.c will not
include qemu/error-report.h any more and it will lead to build errors.
Include qemu/error-report.h directly in virt-acpi-build.c to avoid the
errors.
Fixes: 451b157041 ("acpi: Align the size to 128k")
Signed-off-by: Peng Liang <tcx4c70@gmail.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: move the #include higher as suggested by Ani Sinha)
pci_nic_init_nofail() calls qemu_find_nic_model(), and this function
sets nd->model = g_strdup(default_model) if it has not been initialized
yet. So we don't have to set nd->model to the default_nic in the
calling sites.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The current sbsa-ref cannot use EHCI controller which is only
able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB.
Hence, this uses XHCI to provide a usb controller with 64-bit
DMA capablity instead of EHCI.
We bump the platform version to 0.3 with this change. Although the
hardware at the USB controller address changes, the firmware and
Linux can both cope with this -- on an older non-XHCI-aware
firmware/kernel setup the probe routine simply fails and the guest
proceeds without any USB. (This isn't a loss of functionality,
because the old USB controller never worked in the first place.) So
we can call this a backwards-compatible change and only bump the
minor version.
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn
[PMM: tweaked commit message; add line to docs about what
changes in platform version 0.3]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add MEMORY_LISTNER_PRIORITY_ACCEL for the symbolic value for the memory
listener to replace the hard-coded value 10 for accel.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <feebe423becc6e2aa375f59f6abce9a85bc15abb.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
"sysemu/kvm.h" is indirectly pulled in. Explicit its
inclusion to avoid when refactoring include/:
hw/arm/sbsa-ref.c:693:9: error: implicit declaration of function 'kvm_enabled' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
if (kvm_enabled()) {
^
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405160454.97436-6-philmd@linaro.org>
"kvm_arm.h" contains external and internal prototype declarations.
Files under the hw/ directory should only access the KVM external
API.
In order to avoid machine / device models to include "kvm_arm.h"
simply to get the QOM GIC/ITS class name, un-inline each class
name getter to the proper device model file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405160454.97436-4-philmd@linaro.org>
There are two ARM machines where NUMA is aware: 'virt' and 'sbsa-ref'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster have been associated with different NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create ITS as part of SBSA platform GIC initialization.
GIC ITS information is in DeviceTree so TF-A can pass it to EDK2.
Bumping platform version to 0.2 as this is important hardware change.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230619170913.517373-2-marcin.juszkiewicz@linaro.org
Co-authored-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230607092112.655098-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=543t
-----END PGP SIGNATURE-----
Merge tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu into staging
xenpvh5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmSLo0QACgkQiU+PSHDh
# rpB1Gw/9H5Cx7wQZVyKfFwnyOoP2QTedCISxC0HL5qFmUGcJY21gXaJZ10JaU/HM
# zHEJj2M17EgVCTkZVqZeKuj+nzyjbRKatT3YmFqKqFNNt5M1yQxC9BfVgso4PND/
# SY0/8BvqumgJEqD3sf76KbQAILKwahPtA42LTM7S7r2ZsmQpvmOpdOhCVugpnqs/
# FheP8N6hdlZ7GnRGtXv9QnKxMVThuE3mRCUWCyYsV/Roz6uvPsvskrdSeC3LzzBd
# Ewq56vB+qQg+WbNTgK2BcVOzV/89k9tjWsUnamfhjD2lUxfHrne1FBclhKMcHhUv
# T53zjhxjlRfmzUxC4917Krt4Tw/AaDW7v1pn6RokUq5U059Wb8q0IjzL75FOeD3o
# e9DNp+RR8py44ejfi2WHR7jqayMPVIO86uJ3usshiZ9YgK5efFAtlwN/KNR5JX8k
# Y1BR9O8BebtRymljtiLWUFXlu3xywGSA23KotT7XtzXKEaTZkIHdI395YKksYPkG
# pil0C0bh5ZW3ZWd4M/CNcVOb69R53p15O77mjmKtjnkQYJAPD6Kbc9thZ1zdWwPR
# ivFPdiTJb0FElS0ywZwezKYRKXje6E9ejXgAzgFuZI/rFdeO0HfkifiNoro1NAxK
# g4V+LE5oPt09GpL2nuHrh/y9g9MnLlXyNBhPV0CRelU6fPKIk1w=
# =543t
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 16 Jun 2023 01:48:20 AM CEST
# gpg: using RSA key D04E33ABA51F67BA07D30AEA894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" [unknown]
# gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu:
test/qtest: add xepvh to skip list for qtest
meson.build: enable xenpv machine build for ARM
hw/arm: introduce xenpvh machine
meson.build: do not set have_xen_pci_passthrough for aarch64 targets
hw/xen/xen-hvm-common: Use g_new and error_report
hw/xen/xen-hvm-common: skip ioreq creation on ioreq registration failure
include/hw/xen/xen_common: return error from xen_create_ioreq_server
xen-hvm: reorganize xen-hvm and move common function to xen-hvm-common
hw/i386/xen/xen-hvm: move x86-specific fields out of XenIOState
hw/i386/xen: rearrange xen_hvm_init_pc
hw/i386/xen/: move xen-mapcache.c to hw/xen/
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.
Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.
Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
-chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-machine tpm-base-addr=0x0c000000 \
swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
mkdir /tmp/vtpm2
swtpm socket --tpmstate dir=/tmp/vtpm2 \
--ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Cortex A7 CPUs with an FPU implementing VFPv4 without NEON support
have 16 64-bit FPU registers and not 32 registers. Let users set the
number of VFP registers with a CPU property.
The primary use case of this property is for the Cortex A7 of the
Aspeed AST2600 SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Most of the Aspeed machines use the UART5 device for the boot console,
and QEMU connects the first serial Chardev to this SoC device for this
purpose. See routine connect_serial_hds_to_uarts().
Nevertheless, some machines use another boot console, such as the fuji,
and commit 5d63d0c76c ("hw/arm/aspeed: Allow machine to set UART
default") introduced a SoC class attribute 'uart_default' and property
to be able to change the boot console device. It was later changed by
commit d2b3eaefb4 ("aspeed: Refactor UART init for multi-SoC machines").
The "bmc-console" machine option goes a step further and lets the user define
the UART device from the QEMU command line without introducing a new
machine definition. For instance, to use device UART3 (mapped on
/dev/ttyS2 under Linux) instead of the default UART5, one would use :
-M ast2500-evb,bmc-console=uart3
Cc: Abhishek Singh Dagur <abhishek@drut.io>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This change completes commits 5aa281d757 ("aspeed: Introduce a
spi_boot region under the SoC") and 8b744a6a47 ("aspeed: Add a
boot_rom overlap region in the SoC spi_boot container") which
introduced a spi_boot container at the SoC level to map the boot rom
region as an overlap.
It also fixes a Coverity report (CID 1508061) for a memory leak
warning when the QEMU process exits by using an bmc_boot_rom
MemoryRegion available at the machine level.
Cc: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This should also avoid Coverity to report a memory leak warning when
the QEMU process exits. See CID 1508061.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The current modeling of Rainier machine creates zero filled VPDs(EEPROMs).
This makes some services and applications unhappy and causing them to fail.
Hence this drop adds some fabricated data for system and BMC FRU so that
vpd services are happy and active.
Tested:
- The system-vpd.service is active.
- VPD service related to bmc is active.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: commit title cleanup ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Only a few important registers are added, especially the SRAM_VER
register.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
R40 has two ethernet controllers named as emac and gmac. The emac is
compatibled with A10, and the GMAC is compatibled with H3.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A64's sd register was similar to H3, and it introduced a new register
named SAMP_DL_REG location at 0x144. The dma descriptor buffer size of
mmc2 is only 8K and the other mmc controllers has 64K.
Also fix allwinner-r40's mmc controller type.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Types of memory that the SDRAM controller supports are DDR2/DDR3
and capacities of up to 2GiB. This commit adds emulation support
of the Allwinner R40 SDRAM controller.
This driver only support 256M, 512M and 1024M memory now.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds minimal support for AXP-221 PMU and connect it to
bananapi M2U board.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TWI(i2c) is designed to be used as an interface between CPU host and the
serial 2-Wire bus. It can support all standard 2-Wire transfer, can be
operated in standard mode(100kbit/s) or fast-mode, supporting data rate
up to 400kbit/s.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
R40 has eight UARTs, support both 16450 and 16550 compatible modes.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CCU provides the registers to program the PLLs and the controls
most of the clock generation, division, distribution, synchronization
and gating.
This commit adds support for the Clock Control Unit which emulates
a simple read/write register interface.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allwinner R40 (sun8i) SoC features a Quad-Core Cortex-A7 ARM CPU,
and a Mali400 MP2 GPU from ARM. It's also known as the Allwinner T3
for In-Car Entertainment usage, A40i and A40pro are variants that
differ in applicable temperatures range (industrial and military).
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect CANFD0 and CANFD1 on the Versal-virt machine and update xlnx-versal-virt
document with CANFD command line examples.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let add GIC information into DeviceTree as part of SBSA-REF versioning.
Trusted Firmware will read it and provide to next firmware level.
Bumps platform version to 0.1 one so we can check is node is present.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the 'default y if TCG' pattern with 'default y; depends on
TCG'.
That makes explict that there is a dependence on TCG and enabling
these CONFIGs via .mak files without TCG present will fail earlier.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230523180525.29994-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When passing --smp with a number lower than XLNX_ZYNQMP_NUM_APU_CPUS,
the expression (ms->smp.cpus - XLNX_ZYNQMP_NUM_APU_CPUS) will result
in a positive number as ms->smp.cpus is a unsigned int.
This will raise the following error afterwards, as Qemu will try to
instantiate some additional RPUs.
| $ qemu-system-aarch64 --smp 1 -M xlnx-zcu102
| **
| ERROR:../src/tcg/tcg.c:777:tcg_register_thread:
| assertion failed: (n < tcg_max_ctxs)
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20230524143714.565792-1-chigot@adacore.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As everything is in place, we can use a new system property to
advertise which stage is supported and remove bad_ste from STE
stage2 config.
The property added arm-smmuv3.stage can have 3 values:
- "1": Stage-1 only is advertised.
- "2": Stage-2 only is advertised.
If not passed or an unsupported value is passed, it will default to
stage-1.
Advertise VMID16.
Don't try to decode CD, if stage-2 is configured.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In smmuv3_notify_iova, read the granule based on translation stage
and use VMID if valid value is sent.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-10-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CMD_TLBI_S2_IPA: As S1+S2 is not enabled, for now this can be the
same as CMD_TLBI_NH_VAA.
CMD_TLBI_S12_VMALL: Added new function to invalidate TLB by VMID.
For stage-1 only commands, add a check to throw CERROR_ILL if used
when stage-1 is not supported.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-9-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow TLB to be tagged with VMID.
If stage-1 is only supported, VMID is set to -1 and ignored from STE
and CMD_TLBI_NH* cmds.
Update smmu_iotlb_insert trace event to have vmid.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now, either stage-1 or stage-2 are supported, this simplifies
how we can deal with TLBs.
This patch makes TLB lookup work if stage-2 is enabled instead of
stage-1.
TLB lookup is done before a PTW, if a valid entry is found we won't
do the PTW.
To be able to do TLB lookup, we need the correct tagging info, as
granularity and input size, so we get this based on the supported
translation stage. The TLB entries are added correctly from each
stage PTW.
When nested translation is supported, this would need to change, for
example if we go with a combined TLB implementation, we would need to
use the min of the granularities in TLB.
As stage-2 shouldn't be tagged by ASID, it will be set to -1 if S1P
is not enabled.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-7-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Parse stage-2 configuration from STE and populate it in SMMUS2Cfg.
Validity of field values are checked when possible.
Only AA64 tables are supported and Small Translation Tables (STT) are
not supported.
According to SMMUv3 UM(IHI0070E) "5.2 Stream Table Entry": All fields
with an S2 prefix (with the exception of S2VMID) are IGNORED when
stage-2 bypasses translation (Config[1] == 0).
Which means that VMID can be used(for TLB tagging) even if stage-2 is
bypassed, so we parse it unconditionally when S2P exists. Otherwise
it is set to -1.(only S1P)
As stall is not supported, if S2S is set the translation would abort.
For S2R, we reuse the same code used for stage-1 with flag
record_faults. However when nested translation is supported we would
need to separate stage-1 and stage-2 faults.
Fix wrong shift in STE_S2HD, STE_S2HA, STE_S2S.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230516203327.2051088-6-smostafa@google.com
[PMM: fixed format string]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for adding stage-2 support, add Stage-2 PTW code.
Only Aarch64 format is supported as stage-1.
Nesting stage-1 and stage-2 is not supported right now.
HTTU is not supported, SW is expected to maintain the Access flag.
This is described in the SMMUv3 manual(IHI 0070.E.a)
"5.2. Stream Table Entry" in "[181] S2AFFD".
This flag determines the behavior on access of a stage-2 page whose
descriptor has AF == 0:
- 0b0: An Access flag fault occurs (stall not supported).
- 0b1: An Access flag fault never occurs.
An Access fault takes priority over a Permission fault.
There are 3 address size checks for stage-2 according to
(IHI 0070.E.a) in "3.4. Address sizes".
- As nesting is not supported, input address is passed directly to
stage-2, and is checked against IAS.
We use cfg->oas to hold the OAS when stage-1 is not used, this is set
in the next patch.
This check is done outside of smmu_ptw_64_s2 as it is not part of
stage-2(it throws stage-1 fault), and the stage-2 function shouldn't
change it's behavior when nesting is supported.
When nesting is supported and we figure out how to combine TLB for
stage-1 and stage-2 we can move this check into the stage-1 function
as described in ARM DDI0487I.a in pseudocode
aarch64/translation/vmsa_translation/AArch64.S1Translate
aarch64/translation/vmsa_translation/AArch64.S1DisabledOutput
- Input to stage-2 is checked against s2t0sz, and throws stage-2
transaltion fault if exceeds it.
- Output of stage-2 is checked against effective PA output range.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-5-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for adding stage-2 support, rename smmu_ptw_64 to
smmu_ptw_64_s1 and refactor some of the code so it can be reused in
stage-2 page table walk.
Remove AA64 check from PTW as decode_cd already ensures that AA64 is
used, otherwise it faults with C_BAD_CD.
A stage member is added to SMMUPTWEventInfo to differentiate
between stage-1 and stage-2 ptw faults.
Add stage argument to trace_smmu_ptw_level be consistent with other
trace events.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-4-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for adding stage-2 support.
Add IDR0 fields related to stage-2.
VMID16: 16-bit VMID supported.
S2P: Stage-2 translation supported.
They are described in 6.3.1 SMMU_IDR0.
No functional change intended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20230516203327.2051088-2-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SNVS is supported on both i.MX6 and i.MX6UL and is needed
to support shutdown on the board.
Cc: Peter Maydell <peter.maydell@linaro.org> (odd fixer:SABRELITE / i.MX6)
Cc: Jean-Christophe Dubois <jcd@tribudubois.net> (reviewer:SABRELITE / i.MX6)
Cc: qemu-arm@nongnu.org (open list:SABRELITE / i.MX6)
Cc: qemu-devel@nongnu.org (open list:All patches CC here)
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Message-id: 20230515095015.66860-1-cheptsov@ispras.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230524082037.1620952-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230523110435.1375774-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit b320e21c48,
which accidentally broke TCG, because it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM:
==346473==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address (pc 0x55f328952a4a bp 0x00000213a400 sp 0x7f7871859b80 T346476)
==346473==The signal is caused by a READ memory access.
==346473==Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn which register was used.
#0 0x55f328952a4a in address_space_to_flatview /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:1108:12
#1 0x55f328952a4a in address_space_translate /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:2797:31
#2 0x55f328952a4a in allocation_tag_mem /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:176:10
#3 0x55f32895366c in helper_stgm /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:461:15
#4 0x7f782431a293 (<unknown module>)
It's also not clear that the KVM logic is correct either:
MTE defaults to on there, rather than being only on if the
board wants it on.
Revert the whole commit for now so we can sort out the issues.
(We didn't catch this in CI because we have no test cases in
avocado that use guests with MTE support.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230519145808.348701-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the vexpress board code, we allocate a new MemoryRegion at the top
of vexpress_common_init() but only set it up and use it inside the
"if (map[VE_NORFLASHALIAS] != -1)" conditional, so we leak it if not.
This isn't a very interesting leak as it's a tiny amount of memory
once at startup, but it's easy to fix.
We could silence Coverity simply by moving the g_new() into the
if() block, but this use of g_new(MemoryRegion, 1) is a legacy from
when this board model was originally written; we wouldn't do that
if we wrote it today. The MemoryRegions are conceptually a part of
the board and must not go away until the whole board is done with
(at the end of the simulation), so they belong in its state struct.
This machine already has a VexpressMachineState struct that extends
MachineState, so statically put the MemoryRegions in there instead of
dynamically allocating them separately at runtime.
Spotted by Coverity (CID 1509083).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230512170223.3801643-3-peter.maydell@linaro.org
Bochs card is normal PCI Express card so it fits better in system with
PCI Express bus. VGA is simple legacy PCI card.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230505120936.1097060-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable the
capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230428095533.21747-2-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The world outside moves to newer and newer cpu cores. Let move SBSA
Reference Platform to something newer as well.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230506183417.1360427-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:
$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424152717.1333930-4-peter.maydell@linaro.org
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-3-peter.maydell@linaro.org
[PMM: Moved the "make arm_write_bootloader() function public" part
to its own patch; updated commit message to note that this fixes
an actual bug; adjust to the API changes noted in previous commit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm boot.c code includes a utility function write_bootloader()
which assists in writing a boot-code fragment into guest memory,
including handling endianness and fixing it up with entry point
addresses and similar things. This is useful not just for the boot.c
code but also in board model code, so rename it to
arm_write_bootloader() and make it globally visible.
Since we are making it public, make its API a little neater: move the
AddressSpace* argument to be next to the hwaddr argument, and allow
the fixupcontext array to be const, since we never modify it in this
function.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org
[PMM: Split out from another patch by Cédric, added doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This query copies the kernel command line into the message buffer. It
was previously stubbed out to return empty, this commit makes it reflect
the arguments specified with `-append`.
I observed the following peculiarities on my Pi 3B+:
- If the buffer is shorter than the string, the response header gives
the full length, but no data is actually copied.
- No NUL terminator is added: even if the buffer is long enough to fit
one, the buffer's original contents are preserved past the string's
end.
- The VC firmware adds the following extra parameters beside the
user-supplied ones (via /boot/cmdline.txt): `video`, `vc_mem.mem_base`
and `vc_mem.mem_size`. This is currently not implemented in qemu.
Signed-off-by: Daniel Bertalan <dani@danielbertalan.dev>
Message-id: 20230425103250.56653-1-dani@danielbertalan.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about NUL and short-buffer behaviour]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all the CONFIG_FOO=y from default.mak into "default y if TCG"
statements in Kconfig. That way they won't be selected when
CONFIG_TCG=n.
I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to
keep the two default.mak files not empty and keep aarch64-default.mak
including arm-default.mak. That way we don't surprise anyone that's
used to altering these files.
With this change we can start building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-12-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING
and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in
default.mak anymore. So reflect the change in a Kconfig.
Instead of using semihosting/Kconfig, use a target-specific file, so
that the change doesn't affect other architectures which might
implement semihosting in a way compatible with KVM.
The selection from ARM_v7M needs to be removed to avoid a cycle during
parsing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-11-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
move the module containing cpu models definitions
for 32bit TCG-only CPUs to tcg/ and rename it for clarity.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-8-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the 64-bit CPUs that are TCG-only:
- cortex-a35
- cortex-a55
- cortex-a72
- cortex-a76
- a64fx
- neoverse-n1
Keep the CPUs that can be used with KVM:
- cortex-a57
- cortex-a53
- max
- host
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-6-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
=ML27
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2023/04/20 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
tests/avocado/aspeed: Add TPM TIS I2C test
tpm: Add support for TPM device over I2C bus
tpm: Extend common APIs to support TPM TIS I2C
docs: Add support for TPM devices over I2C bus
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
-----BEGIN PGP SIGNATURE-----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=8ZFL
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into staging
* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
tests/vm/freebsd: Update to FreeBSD 13.2
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
MAINTAINERS: Add Juan Quintela to developer guides review
cpu: Remove parameter of list_cpus()
hw/core: Move numa.c into the target independent source set
softmmu: Move dirtylimit.c into the target independent source set
hw/display: Compile vga.c as target-independent code
softmmu: Make qtest.c target independent
include/exec: Provide the tswap() functions for target independent code, too
softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
hw/char: Move two more files from specific_ss to softmmu_ss
target/i386: Set family/model/stepping of the "max" CPU according to LM bit
tests/migration: Only run auto_converge in slow mode
travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
chardev: Allow setting file chardev input file on the command line
qtest: Don't assert on "-qtest chardev:myid"
test: Fix test-crypto-secret when compiling without keyring support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.
This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.
Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.
The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100
The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com
On mcimx7d-sabre, the MDIO bus is connected to the first Ethernet
interface. Set fec2-phy-connected to false to reflect this.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-6-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-5-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On mcimx6ul-evk, the MDIO bus is connected to the second Ethernet
interface. Set fec1-phy-connected to false to reflect this.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-4-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-3-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-A7 core is only available when TCG is enabled (see
commit 80485d88f9 "target/arm: Restrict v7A TCG cpus to TCG accel").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230405100848.76145-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-H3 and Orangepi-PC.
WDT is added as an overlay to the Timer module memory area.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-A10 and Cubieboard.
WDT is added as an overlay to the Timer module memory map.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230409200526.1156456-1-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At this moment, arm_load_dtb() can free machine->fdt when
binfo->dtb_filename is NULL. If there's no 'dtb_filename', 'fdt' will be
retrieved by binfo->get_dtb(). If get_dtb() returns machine->fdt, as is
the case of machvirt_dtb() from hw/arm/virt.c, fdt now has a pointer to
machine->fdt. And, in that case, the existing g_free(fdt) at the end of
arm_load_dtb() will make machine->fdt point to an invalid memory region.
Since monitor command 'dumpdtb' was introduced a couple of releases
ago, running it with any ARM machine that uses arm_load_dtb() will
crash QEMU.
Let's enable all arm_load_dtb() callers to use dumpdtb properly. Instead
of freeing 'fdt', assign it back to ms->fdt.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Fixes: bf353ad555 ("qmp/hmp, device_tree.c: introduce dumpdtb")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20230328165935.1512846-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
* Small adjustments for the newest Meta machines
* blk_pread_nonzeroes() fix required for pflash and m25p80 devices
* Improve error reporting on file size for m25p80 devices
-----BEGIN PGP SIGNATURE-----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=Xs26
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu into staging
aspeed queue:
* Small adjustments for the newest Meta machines
* blk_pread_nonzeroes() fix required for pflash and m25p80 devices
* Improve error reporting on file size for m25p80 devices
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQHXi8ACgkQUaNDx8/7
# 7KHB7w//SQzcTNAUgMc6zbe3bULS9YU7csg0zX896DwQ9Ub4wtbnIps0/JwOsx6E
# ss52YbbRVlHKcbahX6WW8JHtc6Wepcmnp4vC5dXdqgRryLTK5GgBu/GKcBb6qnHZ
# uXwJpf7IwygOXQFg9Wy4zl3ipmrjgzMy6ZEbc3oqQUto+8E7HVMJiMXnrT5Y0yLt
# Y76PywBxkYWcd522lWAXziXFxHaEJGMGrDCI/op4TuNAk0QLSRHp+x851JBF0Uyx
# Lkp1cEjgADoH1FUfvo7aCNtAWGP4IFDprEupI3idPqjZ8KnnwPk2cnBMGeKJ5lWQ
# XfSTwG5B3hYwGM0uYwHzHXUsq5/JGa0iDhSvjZVD8rf/w9BTek/GjypbJpL2XW6b
# 4QaGGKGFWWMHbAaNVP6oEGqmkoC3QRKoQuaP6epaFyuSjNRWXkOhf5S5V10akjSc
# xis0Z8gIpyLrtFT2TFc5BN9+z+PLgyaYyh7wZ2pFy1i6SOgh4FIFBOzQJDb05mmf
# aFMD+6FOGx0wo8OXfy5EQyElWhVSYio+Hx9DaDP3d3cd/twHJx8nZ8QlXh2ThRd8
# jNLdFReJBImCJHSmYzbc/tGDOjg6+TWkZOzdjqTra08UwisK4XyOKj8E+sodWr0y
# e/hI9nmIoarLCytMN1zElQFvj8xjpZ2lZOxr2EiX5ugYg0iuJhU=
# =Xs26
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 15:54:23 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu:
hw/arm/aspeed: Modified BMC FRU byte data in yosemitev2
hw/arm/aspeed: Added TMP421 type sensor's support in tiogapass
hw/arm/aspeed: Added TMP421 type sensor's support in yosemitev2
pflash: Fix blk_pread_nonzeroes()
m25p80: Improve error when the backend file size does not match the device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modified BMC FRU data in yosemite v2 platform.
Tested: Tested and Verified in yosemitev2 platform.
Fixes: 34f73a81e6 ("hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU")
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307104833.3587947-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added TMP421 type sensor support in tiogapass platform.
Tested: Tested and verified in tiogapass platform.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307103334.3586755-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Added TMP421 type support in yosemite v2 platform.
Tested: Tested and verified in yosemite V2 platform.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230307095239.3583613-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Allwinner h3 has 4 twi(i2c) devices named twi0, twi1, twi2 and r_twi.
The registers are compatible with TYPE_AW_I2C_SUN6I, write 1 to clear
control register's INT_FLAG bit.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fedora 39 will ship its arm64 kernels in the new generic EFI zboot
format, using gzip compression for the payload.
For doing EFI boot in QEMU, this is completely transparent, as the
firmware or bootloader will take care of this. However, for direct
kernel boot without firmware, we will lose the ability to boot such
distro kernels unless we deal with the new format directly.
EFI zboot images contain metadata in the header regarding the placement
of the compressed payload inside the image, and the type of compression
used. This means we can wire up the existing gzip support without too
much hassle, by parsing the header and grabbing the payload from inside
the loaded zboot image.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20230303160109.3626966-1-ardb@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment formatting, fixed checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
-----BEGIN PGP SIGNATURE-----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=ExnJ
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into staging
aspeed queue:
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7
# 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv
# JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X
# ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS
# n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D
# 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW
# MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL
# lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC
# 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN
# yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g
# msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd
# GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg=
# =ExnJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu:
aspeed/smc: Replace SysBus IRQs with GPIO lines
aspeed: Add a boot_rom overlap region in the SoC spi_boot container
aspeed: Introduce a spi_boot region under the SoC
aspeed/fuji : correct the eeprom size
hw/at24c : modify at24c to support 1 byte address mode
hw/arm/aspeed: Adding new machine Tiogapass in QEMU
hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU
tests/avocado/machine_aspeed.py: Add an I2C slave test
hw/misc: add a toy i2c echo device
hw/i2c: only schedule pending master when bus is idle
readline: fix hmp completion issue
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230223065924.42503-5-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's cleaner and removes the curious '+ 1' required to skip the DMA
IRQ line of the controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
To avoid the SPI transactions fetching instructions from the FMC CE0
flash device and speed up boot, a ROM can be created if a drive is
available.
Reverse the logic to allow a machine to boot without a drive, using a
block device instead :
-blockdev node-name=fmc0,driver=file,filename=/path/to/flash.img \
-device mx66u51235f,bus=ssi.0,drive=fmc0
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The default boot address of the Aspeed SoCs is 0x0. For this reason,
the FMC flash device contents are remapped by HW on the first 256MB of
the address space. In QEMU, this is currently done in the machine init
with the setup of a region alias.
Move this code to the SoC and introduce an extra container to prepare
ground for the boot ROM region which will overlap the FMC flash
remapping.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch support Tiogapass in QEMU environment.
and introduced EEPROM BMC FRU data support "add tiogapass_bmc_fruid data"
along with the machine support.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - commit log topic update
- checkpatch issues
- Documentation update ]
Message-Id: <20230216184342.253868-1-pkarthikeyan1509@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Jean-Christophe Dubois