We already implement FEAT_DoubleLock (see commit f94a6df5dd) when
the ID registers call for it. This feature is actually one that must
*not* be implemented in v9.0, but since our documentation lists
everything we can emulate, we should include FEAT_DoubleLock in the
list.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-id: 20241122225049.1617774-7-pierrick.bouvier@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already implement FEAT_MTE_ASYNC; we just forgot to list it
in the documentation.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-6-pierrick.bouvier@linaro.org
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We implemented this at the same times as FEAT_SSBS, but forgot
to list it in the documentation.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-4-pierrick.bouvier@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: improve commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add subsubsections for possible boot methods and introduce a new
section on eMMC boot support for the ast2600-evb and rainier-emmc
machines, boot partitions assumptions and limitations.
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
FEAT_CMOW introduces support for controlling cache maintenance
instructions executed in EL0/1 and is mandatory from Armv8.8.
On real hardware, the main use for this feature is to prevent processes
from invalidating or flushing cache lines for addresses they only have
read permission, which can impact the performance of other processes.
QEMU implements all cache instructions as NOPs, and, according to rule
[1], which states that generating any Permission fault when a cache
instruction is implemented as a NOP is implementation-defined, no
Permission fault is generated for any cache instruction when it lacks
read and write permissions.
QEMU does not model any cache topology, so the PoU and PoC are before
any cache, and rules [2] apply. These rules state that generating any
MMU fault for cache instructions in this topology is also
implementation-defined. Therefore, for FEAT_CMOW, we do not generate any
MMU faults either, instead, we only advertise it in the feature
register.
[1] Rule R_HGLYG of section D8.14.3, Arm ARM K.a.
[2] Rules R_MZTNR and R_DNZYL of section D8.14.3, Arm ARM K.a.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241104142606.941638-1-gustavo.romero@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add placeholder docs for the mcimx6ul-evk and mcimx7d-sabre boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-7-peter.maydell@linaro.org
Add a placeholder doc for the xlnx-zcu102 board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-6-peter.maydell@linaro.org
Add a placeholder doc for the exynos4 boards nuri and smdkc210.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-5-peter.maydell@linaro.org
The fby35 machine is not implemented in hw/arm/aspeed.c,
but its documentation is currently stuck at the end of aspeed.rst,
formatted in a way that it gets its own heading in the top-level
list of boards in target-arm.html.
We don't have any other boards that we document like this; split it
out into its own rst file. This improves consistency with other
board docs and means we can have the entry in the target-arm
list be in the correct alphabetical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-4-peter.maydell@linaro.org
We have two Arm board doc files which both use '*-bmc' in their
documentation title. The result is that when you read the
table of contents in system/target-arm.html you don't know
which boards are covered by which file.
Expand out the board names entirely in the document titles.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-3-peter.maydell@linaro.org
List the olimex-stm32-h405 board in the document title, so that the
board name appears in the table of contents in system/target-arm.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-2-peter.maydell@linaro.org
The Allwinner A10 SPI controller is added to the Allwinner A10
description, so it is available when Cubieboard is emulated.
Update the documentation for Cubieboard to indicate SPI availability.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-3-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the reset and clock controller device to the stm32f405 SoC.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweak commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]
The 'mainstone' machine has been deprecated since 9.0, and
so we can remove it for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-11-peter.maydell@linaro.org
The connex and verdex machines have been deprecated since
9.0 and so can be removed for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-10-peter.maydell@linaro.org
The 'cheetah' machine has been deprecated since 9.0, so we can
remove it for the 9.2 release.
(tsc210x.c is also used by nseries, so move its MAINTAINER file
line there; the nseries boards are also about to be removed.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-9-peter.maydell@linaro.org
The Sharp XScale-based PDA board models akita, borzoi, spitz,
terrier, and tosa were all deprecated in 9.0, so our deprecation
cycle permits removing them for the 9.2 release.
Remove the source files for the board models themselves, and their
documentation. There were no tests for these boards.
We will move the text describing the dropped boards from
deprecated.rst to removed-features.rst when we've cleaned up all the
boards it lists. Device models used only by removed board models
will be removed in separate commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-2-peter.maydell@linaro.org
Now that we've implemented the required behaviour for FEAT_EBF16, we
can enable it for the "max" CPU type, list it in our documentation,
and delete a TODO comment about it being missing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The default behavior of some Aspeed machines is to boot from the eMMC
device, like the rainier-bmc. Others like ast2600-evb could also boot
from eMMC if the HW strapping boot-from-eMMC bit was set. Add a
property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc
machines for which eMMC images are available or can be built.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Added the supported device list and an example command.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-4-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU
since it concerns the external debug interface for JTAG, but is
mandatory in Armv8.8 implementations, hence it is reported as supported
in the ID registers.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable CPU cluster support on SbsaQemu platform, so that users can
specify a 4-level CPU hierarchy sockets/clusters/cores/threads. And
this topology can be passed to the firmware through /cpus/topology
Device Tree.
Signed-off-by: Xiong Yining <xiongyining1480@phytium.com.cn>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240607103825.1295328-2-xiongyining1480@phytium.com.cn
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For some use-cases, it is helpful to have more than one UART
available to the guest. If the second UART slot is not already used
for a TrustZone Secure-World-only UART, create it as a NonSecure UART
only when the user provides a serial backend (e.g. via a second
-serial command line option).
This avoids problems where existing guest software only expects a
single UART, and gets confused by the second UART in the DTB. The
major example of this is older EDK2 firmware, which will send the
GRUB bootloader output to UART1 and the guest serial output to UART0.
Users who want to use both UARTs with a guest setup including EDK2
are advised to update to EDK2 release edk2-stable202311 or newer.
(The prebuilt EDK2 blobs QEMU upstream provides are new enough.)
The relevant EDK2 changes are the ones described here:
https://bugzilla.tianocore.org/show_bug.cgi?id=4577
Inspired-by: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
Add AST2700 Evaluation board and its boot command.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
FEAT_WFxT introduces new instructions WFIT and WFET, which are like
the existing WFI and WFE but allow the guest to pass a timeout value
in a register. The instructions will wait for an interrupt/event as
usual, but will also stop waiting when the value of CNTVCT_EL0 is
greater than or equal to the specified timeout value.
We implement WFIT by setting up a timer to expire at the right
point; when the timer expires it sets the EXITTB interrupt, which
will cause the CPU to leave the halted state. If we come out of
halt for some other reason, we unset the pending timer.
We implement WFET as a nop, which is architecturally permitted and
matches the way we currently make WFE a nop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-3-peter.maydell@linaro.org
None of the RPi boards have ADC on-board. In real life, an external ADC chip
is required to operate on analog signals.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240512085716.222326-1-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This device implements the IM120417002 colors shield v1.1 for Arduino
(which relies on the DM163 8x3-channel led driving logic) and features
a simple display of an 8x8 RGB matrix. The columns of the matrix are
driven by the DM163 and the rows are driven externally.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-2-ines.varhol@telecom-paris.fr
[PMM: updated to new reset hold method prototype]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_Spec_FPACC is a feature describing speculative behaviour in the
event of a PAC authontication failure when FEAT_FPACCOMBINE is
implemented. FEAT_Spec_FPACC means that the speculative use of
pointers processed by a PAC Authentication is not materially
different in terms of the impact on cached microarchitectural state
(caches, TLBs, etc) between passing and failing of the PAC
Authentication.
QEMU doesn't do speculative execution, so we can advertise
this feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-6-peter.maydell@linaro.org
FEAT_ETS2 is a tighter set of guarantees about memory ordering
involving translation table walks than the old FEAT_ETS; FEAT_ETS has
been retired from the Arm ARM and the old ID_AA64MMFR1.ETS == 1
now gives no greater guarantees than ETS == 0.
FEAT_ETS2 requires:
* the virtual address of a load or store that appears in program
order after a DSB cannot be translated until after the DSB
completes (section B2.10.9)
* TLB maintenance operations that only affect translations without
execute permission are guaranteed complete after a DSB
(R_BLDZX)
* if a memory access RW2 is ordered-before memory access RW2,
then RW1 is also ordered-before any translation table walk
generated by RW2 that generates a Translation, Address size
or Access flag fault (R_NNFPF, I_CLGHP)
As with FEAT_ETS, QEMU is already compliant, because we do not
reorder translation table walk memory accesses relative to other
memory accesses, and we always guarantee to have finished TLB
maintenance as soon as the TLB op is done.
Update the documentation to list FEAT_ETS2 instead of the
no-longer-existent FEAT_ETS, and update the 'max' CPU ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-4-peter.maydell@linaro.org
FEAT_CSV2_3 adds a mechanism to identify if hardware cannot disclose
information about whether branch targets and branch history trained
in one hardware described context can control speculative execution
in a different hardware context.
There is no branch prediction in TCG, so we don't need to do anything
to be compliant with this. Upadte the '-cpu max' ID registers to
advertise the feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-3-peter.maydell@linaro.org
As of version DDI0487K.a of the Arm ARM, some architectural features
which previously didn't have official names have been named. Add
these to the list of features which QEMU's TCG emulation supports.
Mostly these are features which we thought of as part of baseline 8.0
support. For SVE and SVE2, the names have been brought into line
with the FEAT_* naming convention of other extensions, and some
sub-components split into separate FEAT_ items. In a few cases (eg
FEAT_CCIDX, FEAT_DPB2) the omission from our list was just an oversight.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240418152004.2106516-2-peter.maydell@linaro.org
Add the USART to the SoC and connect it to the other implemented devices.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr
[PMM: fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable FEAT_NMI on the 'max' CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-24-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hardware of sbsa-ref board is nowadays defined by both BSA and SBSA
specifications. Then BBR defines firmware interface.
Added note about DeviceTree data passed from QEMU to firmware. It is
very minimal and provides only data we use in firmware.
Added NUMA information to list of things reported by DeviceTree.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240328163851.1386176-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Features supported :
- the 8 STM32L4x5 GPIOs are initialized with their reset values
(except IDR, see below)
- input mode : setting a pin in input mode "externally" (using input
irqs) results in an out irq (transmitted to SYSCFG)
- output mode : setting a bit in ODR sets the corresponding out irq
(if this line is configured in output mode)
- pull-up, pull-down
- push-pull, open-drain
Difference with the real GPIOs :
- Alternate Function and Analog mode aren't implemented :
pins in AF/Analog behave like pins in input mode
- floating pins stay at their last value
- register IDR reset values differ from the real one :
values are coherent with the other registers reset values
and the fact that AF/Analog modes aren't implemented
- setting I/O output speed isn't supported
- locking port bits isn't supported
- ADC function isn't supported
- GPIOH has 16 pins instead of 2 pins
- writing to registers LCKR, AFRL, AFRH and ASCR is ineffective
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240305210444.310665-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable all FEAT_ECV features on the 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-9-peter.maydell@linaro.org
Add the necessary files to add a simple RCC implementation with just
reads from and writes to registers. Also instantiate the RCC in the
STM32L4x5_SoC. It is needed for accurate emulation of all the SoC
clocks and timers.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A few deficiencies in the current device model need to be noted.
1. FIFOs are not used. All sends and receives are done directly.
2. Repeated starts are not emulated. Repeated starts can be triggered in real
hardware by sending a new read transfer request in the window time between
transfer active set of write transfer request and done bit set of the same.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240224191038.2409945-2-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-42-sergey.kambalin@auriga.com
[PMM: list PCIE and GENET as 'missing' for now, until we land
the patches which add those devices]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add documentation for the mps3-an536 board type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-14-peter.maydell@linaro.org
This patch adds the SPI controller for the BCM2835. Polling and interrupt modes
of transfer are supported. DMA and LoSSI modes are currently unimplemented.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Message-id: 20240129221807.2983148-2-rayhan.faizel@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a note on CPU features that are off by default in `virt` machines.
Some CPU features will remain off even if a CPU-capable CPU (e.g.,
`-cpu max`) is selected because they require support in both the CPU
itself and in the wider system. Therefore, the user, besides selecting a
CPU that supports such features, must also turn on the feature using a
machine option.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240122211215.95073-1-gustavo.romero@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add watchdog timer support to Allwinner-H40 and Bananapi.
The watchdog timer is added as an overlay to the Timer
module memory map.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20240115182757.1095012-4-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allwinner R40 supports an AHCI compliant SATA controller.
Add support for it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20240115182757.1095012-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allwinner R40 supports two USB host ports shared between a USB 2.0 EHCI
host controller and a USB 1.1 OHCI host controller. Add support for both
of them.
If machine USB support is not enabled, create unimplemented devices
for the USB memory ranges to avoid crashes when booting Linux.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240115182757.1095012-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pierrick Bouvier