.
Allows to have a single dynaCRC DLL for several games, differentiated by their CRCs by using the new utility IsCRC(0x12345678, 0x87654321, ...).
Note: With old GSdx (and updated new DynaCrcHack.c), IsCRC always returns false.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5215 96395faa-99c1-11dd-bbfe-3dabce05a288
- 14 Updated hacks, 41 new hacks (See full list at the first comment).
- New crc-hacks might have patial crc lists, so it's possible that some copies won't get the benefit (yet).
- Non crc-hacks code was NOT imported from Cutie, so some crc hacks might not be as effective as within Cutie itself.
- New region: CH, few more CRCs.
Note:
Due to the very big list of affected games, I couldn't test the vast majority of them, and so your help would be appreciated in testing. Please report (even if someone else already reported with the same result as yours) with the following format:
<game name> - <better/worse/same> (reason) - tested <little/medium/much>
e.g.:
Tomb Raider Legend - Better (removes garbage graphics) - tested a little.
GTA San Andreas - Better (removes ghosts) - tested a little.
And of course, big thank you goes to the author of Cutie, for the time put into improving PCSX2, and for respecting the GPL license and releasing the code.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5214 96395faa-99c1-11dd-bbfe-3dabce05a288
* some parameters was set after the shader setup. Extend the API to do the shader setup before the draw
* remove the useless shader compatibility bits
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5212 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix properly context, directly save the state in the shader
* replace the last deprecated variable in the shader. Remain the issue that host enable 1 output and the shader write 2 outputs
* It seems that VBO does't depends on the VAO but vertex format depends on both VBO/VAO so I set the format multiple time. Not sure the behavior is fully correct
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5211 96395faa-99c1-11dd-bbfe-3dabce05a288
zzogl: rework the shader interface to use struct like CG. Shader are still broken because some variables (gl_color & gl_secondary_color) are not supported in vertex shader...
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5209 96395faa-99c1-11dd-bbfe-3dabce05a288
* use 128 vertex buffer instead of 512 that will avoid to fill the GPU vram
* Use separate shader infrastructure for GLSL 4 as Nvidia cg. Beside code is much easier to understand
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5208 96395faa-99c1-11dd-bbfe-3dabce05a288
various: apply some patch of Micove to disable debug logging in GSdx release mode
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5206 96395faa-99c1-11dd-bbfe-3dabce05a288
* Clean the zzsetparameter API to always use the program for uniform that depends on the program. Future goal is to use a nice OO interface
* Use uniform buffer. Would allow future optimization and remove most initialization stuff. Don't support yet the 2 zzogl contexts.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5201 96395faa-99c1-11dd-bbfe-3dabce05a288
* drop hack for of Natty and use the std FindGtk2 module, time to upgrade to Precise.
* Bump cmake requirement to 2.8.5 to avoid multiarch issue
* Create new cmake variable GLSL_SHADER_DIR for glsl file. Default value /usr/share/games/pcsx2
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5200 96395faa-99c1-11dd-bbfe-3dabce05a288
pcsx2: don't print window title in fullscreen because it create a white frame flickering. Seem like a wx regression
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5199 96395faa-99c1-11dd-bbfe-3dabce05a288
* Add 2 new dev options: REBUILD_SHADER (nvidia cg) & BUILD_REPLAY_LOADERS
* zzogl-pg-cg will use the shader of zzogl-pg.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5190 96395faa-99c1-11dd-bbfe-3dabce05a288
* add some code to support OGL4 debugging. Not enable on CmakeList.txt by default
* LOAD_PS/LOAD_VS were using a "std" argument instead of a reference.
* reuse the opengl context creation developed for GSdx. For the moment only enable OGL2
* Add some documentation for the zzShader API
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5188 96395faa-99c1-11dd-bbfe-3dabce05a288
* for the moment only the SW render is supported, hopefully HW will come some day. And linux only for the moment.
* Require an OpenGL3 GPU (==Dx10) ie Nvidia >= 8800, AMD >= HD2000)
* Require an OpenGL4.2 compatible drivers => no opensource driver supported neither Intel driver.
* Build by default without SDL support which will dropped later. You need to add this define "ENABLE_SDL_DEV" on Win.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5186 96395faa-99c1-11dd-bbfe-3dabce05a288
* put shade boost in HW setting (not sure it is HW only)
* Remove logz, useless since openGL support 32bits Z buffer
* Update hack section with a table. Note don't put MSAA (not yet implemented) to have a nice square
Note: user hack is enabled with "UserHacks" instead of "allowHacks"
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5184 96395faa-99c1-11dd-bbfe-3dabce05a288
The detection is based on a quickly reversed smode1 flag and needs to be done properly.
The timing itself also needs reversing and has only been tested on the VP2 intro video.
(That video now runs without audio / video desync when progressive scan is enabled :) )
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5179 96395faa-99c1-11dd-bbfe-3dabce05a288
various:
* rename the man page as requested by arch users.
* Delete pcsx2/* symlink. Was only useful for autotool removed few years ago.
* commit the top metadata of my previous branch merge.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5172 96395faa-99c1-11dd-bbfe-3dabce05a288
* new memory management
* asm was replaced by intrinsic
* new GLSL backend (AMD only) Cmake is probably broken anyway with the 2 plugins...
* and lots of others stuff that I forgot about it ;)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5166 96395faa-99c1-11dd-bbfe-3dabce05a288
Then it would be easier to separate CG/GLSL for copyright issue. CG is not compatible with the GPL...
Old version will be zzogl-pg-cg
Future version will be zzogl-pg
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5165 96395faa-99c1-11dd-bbfe-3dabce05a288
Previously: GSdx was switching between the configured renderer and the best SW renderer (best = DX11 if supported).
Now: If using DX: Switch SW/HW renderer and use the same DX version. If using SDL: same as before.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5164 96395faa-99c1-11dd-bbfe-3dabce05a288
* build the utility to prebuilt cg shader (zzogl-shader)
* build the shader (ps2hw_cmake.dat) that would avoid copyright issue for debian/ubuntu
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5159 96395faa-99c1-11dd-bbfe-3dabce05a288
cmake: keep all library for the linking of plugins
hex2h.pl: add svn:executable
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5157 96395faa-99c1-11dd-bbfe-3dabce05a288
* change the man page to gpl3
* add missing copyrigh for zerogsshader
* re write bin2cpp tool (in perl) to avoid any copyright issue => hex2h.pl
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5155 96395faa-99c1-11dd-bbfe-3dabce05a288
* update missing copyright on
+ plugins/GSdx/config.h
+ pcsx2/MTVU.h
+ plugins/zzogl-pg/opengl/ZZHacks.h
+ plugins/spu2-x/src/DplIIdecoder.cpp
* put a copyright for trivial script file
+ pcsx2/gui/Resources/rebuild.sh
+ tools/bin2app.sh
+ plugins/zzogl-pg/opengl/shaders.sh
* remove autotool from zzogl
* apply the patch for issue 1257. Thanks very much Micove for the hard work.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5154 96395faa-99c1-11dd-bbfe-3dabce05a288
* Only available on debug build
* ctrl F9 -> dump a couple of frames
* ctrl shift F9 -> start/stop a stream of frames.
* Build a replayer too, called pcsx2_ZZReplayLoader
Note: dump are saved in /tmp.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5152 96395faa-99c1-11dd-bbfe-3dabce05a288
Some games use volume slides combined with reversed phase.
Gigaherz tweaked the code to handle this nicer (fixes Mashed Drive to Survive noises).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5139 96395faa-99c1-11dd-bbfe-3dabce05a288
* Keep the state of the draw buffer (save few opengl call)
* AMD fix the shader unloading (12.2 and above). So disable the workaround
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl@5137 96395faa-99c1-11dd-bbfe-3dabce05a288