* properly detect gl nv depth extension
* Always show the hack on the gui. Add a new hack option for DATE (gl4.2) only
* Save the scan mode on linux too (f7)
* hopefully fix some crash on some drivers... (ensure aligment 256 bits alignment, and if not use std memcpy)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5888 96395faa-99c1-11dd-bbfe-3dabce05a288
* gui refresh
+ Use some tab to reduce heigth for small screen
+ Add logz option
+ remove broken/experimental keyword. GSdx ogl is not too bad ;)
* autodetect GL_NV_depth_buffer_float
Linux tester you are welcome!
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5862 96395faa-99c1-11dd-bbfe-3dabce05a288
Best setting if you driver support GL_NV_depth_buffer_float => GL_NV_Depth = 1 & logz = 0
Otherwise => GL_NV_Depth = 0 & logz = 1
Explanation of the bug:
Dx z position ranges from 0.0f to 1.0f (FS ranges 0.0f to 1.0f)
GL z Position ranges from -1.0f to 1.0f (FS ranges 0.0f to 1.0f)
Why it sucks:
GS small depth value will be "mapped" to -1.0f. In others all small values will be 1.0f! Terrible lost
of accuraccy.
The GL_NV_depth_buffer_float extension allow to set the near plane as -1.0f.
So
"GL z Position ranges from -1.0f to 1.0f (FS ranges 0.0f to 1.0f)"
will become
"GL z Position ranges from -1.0f to 1.0f (FS ranges -1.0f to 1.0f)"
and therefore
"z posision [0.0f;1.0f] will map to FS [0.0f;1.0f]" as DX
Yes we just get back all precision lost previously :)
However you need hardware (intel?) and driver support (free driver?/gles?) :(
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5860 96395faa-99c1-11dd-bbfe-3dabce05a288
* restore the old fxaa (Asmodeam will be integrated when I got time)
* port the recently added new scanline algo
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5818 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to use more subroutine on VS&PS, unfortunately hit a driver crash!
* Call Attach/DetachContext through GSDevice so I can unmap currently mapped buffer
* Implement glsl part of GL_ARB_bindless texture, again hit another driver crash!
* various fix of GL_ARB_buffer_storage. Basic benchmark show only improvement on 'cold' case, I guess it will improve smoothness
* try to fix GL_clear_texture, no success so far. It seem the extension is limited to basic texture (aka no depth/stencil)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5752 96395faa-99c1-11dd-bbfe-3dabce05a288
* GL_ARB_shader_subroutine for perf
fix for nvidia => add missing shader declaration. Nvidia got +4fps on colin3 :)
For the moment only 2 PS parameters are supported. Code need to be extended to support others games that often
switch shader program (like xenosaga).
require GL4 class hardware and the option override_GL_ARB_shader_subroutine = 1
Note: strangely on AMD linux it is slower!
* GL_ARB_shader_image_load_store for accuraccy (Date)
Use a signed integer texture and reenable color buffer writing
Current status: Amagami_transparency.gs & P3_battle_shadows.gs are now working on Nvidia with a small perf impact.
Current implementation detail:
1/ setup the standard stencil as before
2/ on remaining pixel, draw once to compute first primitive that will write a fail alpha value.
3/ final draw based on primitive id of step 2
Note: I think we would get a bad behavior if depth test&mask are enabled on step 2/3
Note2: on my limited testcase the perf impact was on CPU. It would be possible to merge step1&2 to nullifying it (could
even be faster actually), however it would require more GPU power.
Again require GL4 class hardware. And the option UserHacks_DateGL4 = 1
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5725 96395faa-99c1-11dd-bbfe-3dabce05a288
* some preliminary work to test/benchmark bindless texture in the future (glsl was not yet updated)
Bindless texture allow to get a GPU texture pointer and then set it directly
to the shader as a basic uniform.
=> no more texture unit selection/validation
=> no more texture validation neither texture hash lookup
3rdparty: update gl header to the latest gl4.4
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5720 96395faa-99c1-11dd-bbfe-3dabce05a288
Card that support gs:
remain only a gs to generate sprite from a line. Even dummy gs are costly for the GPU.
Card that don't support gs:
remove useless copy of color for line and triangle primitives
Note for dx: opengl 3.2 (maybe not gles) supports both flat interpolation
convention (GL_FIRST_VERTEX_CONVENTION or GL_LAST_VERTEX_CONVENTION). It might
be possible to shuffle vertex index to put the last vertex in first position.
- buff[0] = head + 0;
- buff[1] = head + 1;
- buff[2] = head + 2;
+ buff[0] = head + 2;
+ buff[1] = head + 1;
+ buff[2] = head + 0;
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5718 96395faa-99c1-11dd-bbfe-3dabce05a288
The idea was to replace shader program swith by pointer function calls inside
shaders. At least parameters that are often changed between draw call. So far
I only ported atst and colclip. Unfortunately code is "slower" (on GSdx standalone).
For the moment keep the code but disabled.
If I understand well the validation of program is done in the "driver thread"
but the additional call are done in the overloaded MTGS thread. Apitrace
profiling shows faster GPU draw calls. Another possibility is that the driver still
need to validate the draw call because of others state change.
Here some stats on colin3 (90 frames):
without subroutine: UseProgram 125246
with subroutine: UseProgram 2906, subroutine 125945 => 3605 extra calls overhead (not
all parameters are ported to subroutine)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5715 96395faa-99c1-11dd-bbfe-3dabce05a288
* move most of gl states into a separate namespace. Extend it to depth/stencil/blend micro state
=> save 10,000 opengl call by frame for colin mcrae 3
* Only setup blend state of first drawbuffer
* Don't request anymore a debug context on dev/release build
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5713 96395faa-99c1-11dd-bbfe-3dabce05a288
* clean extension management and fix compilation of previous gl44 code.
* Use pixel buffer object to upload texture data.
=> avoid crash on AMD driver
=> a bit faster and probably got some margins for the future
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5712 96395faa-99c1-11dd-bbfe-3dabce05a288
* preliminary work for GL4.4 extensions (ARB_clear_texture & ARB_multi_bind). Disabled until I got a 4.4 driver
Note: I plan also to use ARB_buffer_storage
* compute texture gl option in the constructor (avoid a couple of swith case)
* redo texture unit management. Unit 0-2 for shaders, Unit 3 for texture operations. MultiBind will allow to bind
shader input without disturbing texture binding points.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5711 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a non-working hack: UserHacks_DateGL4, goal was to replace UserHacks_AlphaStencil
+ Detection of good/bad samples is based on primitive ID variable. However I'm not sure
the behavior is always the same between draw call...Anyway let's keep a copy of the current
work
* Dump integer texture into text csv
* add gl4.2 ARB_shader_image_load_store extension (needed by UserHacks_DateGL4)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5707 96395faa-99c1-11dd-bbfe-3dabce05a288
* allow to switch renderer with F9
* skip first frame in stat of the replayer
* drop msaa. Fxaa and internal resolution will do the job
* move texture attachment from texture object into device object (allow to keep sanely the state)
* split the write buffer and attachment setup
* completely split sampler and texture input setup
* redo GSDeviceOGL::CopyOffscreen to avoid an extra copy.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5704 96395faa-99c1-11dd-bbfe-3dabce05a288
* use gles header file, disable opengl code (mainly GLX, ARB_sso, geometry shader)
* Define properly the function pointer, GLES use basic linking whereas GL must get the symbol dynamically
* cmake: properly search and set libglesv2.so
* don't use dual source blending => HW renderer work (only miss unimportant FBA)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5701 96395faa-99c1-11dd-bbfe-3dabce05a288
* uniform was wrongly set before the activation of the program (free driver only)
* Always use only 1 drawbuffer. Easier besides previous setup was wrong for convert:ps_main1
GLES trial (v3):
* add the cmake option GLES_API. Note library (libgles) are hardcoded for the moment
* Disable opengl check
* Disable gl_GetDebugMessageLogARB not supported!
* Emulate gl_DrawElementsBaseVertex, add manually the index offset (surely slow but work)
* Fix hundred of shader error (no implicit cast of integer to float...)
Unfortunately GLES doesn't support dual blending so no blend in hardware renderer. Otherwise it is fine
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5700 96395faa-99c1-11dd-bbfe-3dabce05a288
* redo glsl2h.pl script to generate only one big glsl headers.
* fix gcc warning in GSVector.h
* fix memory leak of GSDeviceOGL.m_shader
* clean shader compilation function => split generation header & drop malloc stuff
cmake:
* only rebuild shader when asked by the use. Avoid perl dependency to build pcsx2
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5698 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove the possibility to compile shader from file. Some people loads older shaders...
The feature might be readded later
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5697 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to setup advance gl context attribute. If driver doesn't support it fallback to the default.
zzogl:
* use glsl2h to generate an header shader as GSdx. Much easier to install
* Get GSUniformBufferOGL & GSVertexArrayOGL speed improvement from GSdx
cmake:
* detect current gcc version. Yield a warning if < 4.7 or an error if < 4.5
glsl2h:
* support zzogl too
* compute md5sum to avoid useless relink
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5696 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove unused variable
* move static function from h into cpp
* Initialized hw_by_page to 0xFFFFFFFF instead of -1 (number must be a positive integer)
* Use a s32 fore m_current_lsn instead of u32 (use -1 as error code)
Bonus: a couple of fix for clang compiler (doesn't mean that it fully compile with clang)
* remove useless __debugbreak on linux
* use short for 16bits atomic function
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5695 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix shader compilation on Nvidia (broken on r5682)
* fix various memory leak thanks to Valgrind
Cmake: fix a minor typo
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5688 96395faa-99c1-11dd-bbfe-3dabce05a288
* Separate state and shader compilation into separate function
* replace various hash_map by basic array
* Compact VertexScale and offset into a single vec4
* add the new option "ogl_vertex_subdata": subdata is faster on FGLRX, test are welcome on Nvidia drivers
0 => use map/unmap
1 => use subdata
replay: add "linux_replay" option and compute some nice stat (mean, standard deviation)
cmake: recreate shader header at build time
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5682 96395faa-99c1-11dd-bbfe-3dabce05a288
* don't delete the wnd in GSclose. It can still be used later
* Properly detect the GL_ARB_gpu_shader5 extension for Fxaa
* A couple of fix in Create (GSopen1) of GSWndEGL/GSWndOGL
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5674 96395faa-99c1-11dd-bbfe-3dabce05a288
gsdx:
* move gl function loading into GSwnd. Clean the header and avoid to rely on macro.
* Always require libegl for GSdx. You still need to select the API at compilation.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5670 96395faa-99c1-11dd-bbfe-3dabce05a288
* Don't write color during stencil. Keep the old method to ease debug
* Realign date shader on DX
* keep stencil ref to 1. Reduce stencil management burder
* Fix texture pitch (was in pixels but need bytes). Fix Bleach Blade Battlers 2. Thanks Miseru for your trace
Remember note:
fxaa -> not yet implemented
msaa -> not implemented (I might drop it actually)
8 bit texture -> not yet implemented
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5657 96395faa-99c1-11dd-bbfe-3dabce05a288
* detect Advanced Micro Devices for newer AMD Card...
* Mess with coordinate for StretchRect. Upscaling seem to work now. Surely the biggest diff between ogl and dx...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5655 96395faa-99c1-11dd-bbfe-3dabce05a288
* factorize sample object creation
* remember frame buffer attachment state
* Use a basic context on EGL. Allow to use Mesa 9.1 on AMD GPU.
* precompile vertex and geometry shader to avoid benchmark polution on replay
* Try harder to detect FGLRX driver on window
* various clean
Remain to fix the coordinate system for upscaling
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5651 96395faa-99c1-11dd-bbfe-3dabce05a288
* clean texture management & use different texture unit for various texture operation
* separate sampler and texture setup
* Always disable GL_SCISSOR_TEST before any cleaning to be sure the all pixels are reset
* properly set upscale_multiplier in the linux gui (was mixed with msaa). Unfortunately it is still broken...
* Fix EGL with GSopen1
* Use stdcall for function definition in the replay (avoid segmentation fault)
* Directly use gl_Position in shader instead of an extra user defined variable
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5648 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace most OGL_FREE_DRIVER with a dynamic detection. Remains the context creation. Closed drivers need 3.3
* Add the CopySubImage fallback
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5647 96395faa-99c1-11dd-bbfe-3dabce05a288
* Emulate Geometry Shader from the CPU.
* add some option to override opengl extension detection
* redo shader interface (again) to compile on the free driver
SW renderer is now working on the free driver.
To test it on your linux box use this cmake option -DEGL_API=TRUE
Note: (need opengl 3.0) I test mesa 9.2 git
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5646 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix a bad interaction when GL_ARB_SSO is supported without GL_ARB_shading_language_420pack
* try to replace struct with flat parameter in glsl interface
=> with some hacks of the free driver, I was able to compile SW renderer shader. Unfortunately
the rendering is broken. Maybe my hack :p
* remove EGL context check (wasn't working as expected)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5644 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix wrong interaction when both GL41 or GL42 aren't supported
* Add a new define to downgrade opengl requirement to test the free driver and EGL
=> As far as I can tell, they only miss geometry shader& GLSL150 (got GLSL140)
* Found a way to avoid crash in AMD driver. Skip the upload of small texture but rendering is wrong now...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5643 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove an old&useles dummy geometry shader (was used to workaround amd bug)
* use a basic X11 window for GSopen1
* redo the replayer: it is now based on dlopen rather than standard static/dynamic library. AMD driver doesn't play nicely with the later...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5639 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace both DISABLE_GL41_SSO and DISABLE_GL42 macro with a dynamic check based on the extension support
* glsl2h: use static instead of extern
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5636 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a perl script to convert shader to char*
* By default use *.glsl file (handy to do some trials).
Only drawback, glsl2h need to be manually called at the moment
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5632 96395faa-99c1-11dd-bbfe-3dabce05a288
* workaround AMD driver bleding issue (got at least a nice rendering in GoW)
* would run on the opensource driver when they support geometry shader
Stil got some crash on the driver. Arg!!!
FGLRX user if you want to do some trials
uncomment #define DISABLE_GL41_SSO in GSdx/config.h
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5630 96395faa-99c1-11dd-bbfe-3dabce05a288
* Use bigger index for Uniform buffer to avoid any collision with sampler.
* add a new config to disable openGL 4.2 requirement. Would be done at runtime later.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5620 96395faa-99c1-11dd-bbfe-3dabce05a288
gregory.hainaut