* Integrate support for building with dependencies from vcpkg
Configure the build using -DUSE_VCPKG=ON to use vcpkg. By default
recommended triplets targeting the OS versions official builds support
are used. You can opt out of this with -DUSE_RECOMMENDED_TRIPLETS=OFF.
* Add the vcpkg manifest
* Fetch vcpkg with FetchContent if we don't have it
* macOS cross compiling fixes
- can't use the x86_64 one as host triplet on arm64 because building Qt
fails for whatever reason. Because of course it does :D
- vcpkg doesn't always like periods in triplet names so removed those
* x86_64 macOS should also use its recommended target when building arm64 builds
- When I adapted `GBACart::ParseROM` to use `unique_ptr` instead of a plain pointer, I forgot to remove the code that copied the SRAM data
- That code was made unnecessary because of the move
* Simplify the SRAM's representation in `NDSCartArgs`
- I overthought this one.
- I could've just checked `args && args->SRAM`, but then some other poor bastard might make this mistake.
- Don't mix `pair`, `optional`, and `unique_ptr` all at once, kids.
* Fix a `nullptr` read
* Fix detection of native NDS ARM BIOS images
- Instead of checking for built-in BIOS images, now the altered methods check for native ones
- The CRC32 must match exactly; patched BIOS images will result in `false`
* Encapsulate `NDS::ARM9BIOS` and `ARM7BIOS`
- Also compute the checksum only when setting the BIOS
* Allow 3D renderers to be created without passing `GPU` to the constructor
* Make the initial 3D renderer configurable via `NDSArgs`
* Fix a compiler error
* Sprinkle `const` around where appropriate
- This will make it easier to use `NDS` objects in `const` contexts (e.g. `const` parameters or methods)
* Remove the `const` qualifier on `DSi_DSP::DSPRead16`
- MMIO reads can be non-pure, so this may not be `const` in the future
Fixes Castlevania: Dawn of Sorrow's checksumming which uses crc16 swi and has garbage in the upper 16 bits of r0.
The official BIOS would seem to implicitly clear these upper 16 bits.
* Get rid of `ConfigEntry::ExternalBIOSEnable`
- Now the BIOS files themselves are checked
- The frontend's `Config::ExternalBIOSEnable` is not affected
* Add `JITArgs`
* Pass the JIT status to the `ARM` constructors
* Encapsulate `NDS::EnableJIT`
* Pass `JITArgs` to `ARMJIT`'s constructor
* Remove the `JIT_*` `ConfigEntry`s in favor of members
- Allow all the JIT args to be set with `NDS::SetJITArgs`
- Encapsulate the JIT-related parameters in `ARMJIT` so they can reset the block cache if changed
- Update the active (or newly-created) console in the frontend with adjusted JIT args
* Make audio bit depth and interpolation configurable in `NDSArgs`
- Define enums for both
- Give those settings default values in `NDSArgs`
- Remove `ConfigEntry::AudioBitDepth`
- Initialize these settings in the relevant SPU constructors
* Move the last DSi-specific logic in `Reset` to its own subclass
* Remove `ConfigEntry::DSi_FullBIOSBoot`
- Add members to `DSi` instead for getting and setting this
- Update the frontend to accommodate these changes
* Oops, missed a spot
* Remove `ConfigEntry::Firm_MAC` and `Platform::GetConfigArray`
- Also move the MAC parsing code to `ROMManager`
* Remove the last `ConfigEntry` state
- Make GDB support configurable via members
* Add some `#ifdef`s that I'd almost forgotten
* Remove `FATStorage::Open` and `FATStorage::Close`
- That's what the constructor and destructor are for, respectively
* Add `FATStorage::IsReadOnly`
* Slight cleanup of `FATStorage`
- Make it move-constructible and move-assignable
- Represent the absence of a sync directory with `std::optional`, not an empty string
- Add `FATStorageArgs` for later use
* Refactor `CartHomebrew` to accept an optional `FATStorageArgs`
- `CartHomebrew` uses it to load an SD card image
- Not passing a `FATStorage` directly because we won't know if we need to load the card until we parse the ROM
- Store the `FATStorage` inside a `std::optional` instead of a pointer
- `CartHomebrew::Reset` no longer reloads the SD card; the frontend needs to set it with the `SetSDCard` method
* Close `NANDImage::CurFile` when move-assigning
- Whoops
* Add `Args.h`
- To construct a `NDS` or `DSi` with arguments
- Mostly intended for system files
* Fix incorrect `final` placement
* Refactor how `DSi`'s NAND and SD card are set
- Provide them via a `DSiArgs` argument in the constructor
- Give `DSi_MMCStorage` ownership of the `NANDImage` or `FATStorage` as needed, and expose getters/setters
- Replace `DSi_SDHost::Ports` with a `array<unique_ptr, 2>` to reduce the risk of leaks
- Store `DSi_MMCStorage`'s disk images in a `std::variant`
- The SD card and NAND image are no longer reset in `Reset()`; the frontend will need to do that itself
* Add getters/setters on `DSi` itself for its storage media
* Remove newly-unused `Platform::ConfigEntry`s
* Use `DSi::SetNAND` in the frontend
* Add `EmuThread::NeedToRecreateConsole`
* Document `NDSArgs` and give its fields default values
* Refactor how system files are loaded upon construction
- Pass `NDSArgs&&` into `NDS`'s constructor
- Use `std::array` for the emulator's BIOS images and the built-in FreeBIOS, to simplify copying and comparison
- Initialize the BIOS, firmware, and SD cards from `NDSArgs` or `DSiArgs`
- Add a new default constructor for `NDS` (not `DSi`) that initializes the DS with default system files
- Embed `FirmwareMem::Firmware` directly instead of in a `unique_ptr`
- `SPIHost` now takes a `Firmware&&` that it forwards to `FirmwareMem`
- Add `Firmware` getters/setters plus `const` variants for `NDS`, `Firmware`, and `FirmwareMem`
- Simplify installation of firmware
* Initialize the DSi BIOS in the constructor
- Change `DSi::ARM9iBIOS` and `ARM7iBIOS` to `std::array`
* Update the frontend to reflect the core's changes
* Remove `DSi_SDHost::CloseHandles`
* Pass `nullopt` instead of the empty string when folder sync is off
* Deduplicate ROM extraction logic
- `LoadGBAROM` and `LoadROM` now delegate to `LoadROMData`
- Also use `unique_ptr` instead of `new[]`
* Oops, missed some `get()`'s
* Move `NDS::IsLoadedARM9BIOSBuiltIn` to the header
- So it's likelier to be inlined
- Same for the ARM7 version
* Remove `NDS::SetConsoleType`
* Add `NDS::SetFirmware`
* Move `GBACart::SetupSave` to be `protected`
- It was only ever used inside the class
* Rename `GBACart::LoadSave` to `SetSaveMemory`
- Same for the cart slot
* Declare `GBACartSlot` as a friend of `GBACart::CartCommon`
* Revise `GBACartSlot`'s getters and setters
- Rename `InsertROM` and `LoadROM` to `SetCart`
- Add a `GetCart` method
* Clean up getters and setters for NDS and GBA carts
* Clean up how carts are inserted into the slots
- Remove setters that operate directly on pointers, to simplify error-handling (use ParseROM instead)
- Add overloads for all carts that accept a `const u8*` (to copy the ROM data) and a `unique_ptr<u8[]>` (to move the ROM data)
- Store all ROM and RAM data in `unique_ptr`
- Default-initialize all fields
- Simplify constructors and destructors, inheriting where applicable
* Refactor GBA save data insertion
- Make `SetupSave` private and non-virtual and move its logic to be in `SetSaveMemory`
- Add overloads for setting save data in the constructor
- Update the SRAM completely in `SetSaveMemory`
* Clean up `NDSCart::CartCommon::SetSaveMemory`
- Move its declaration next to the other `SaveMemory` methods
- Move its (empty) implementation to the header
* Add some comments
* Add Utils.cpp and Utils.h
* Rename some functions in Utils for clarity
* Add `GBACart::ParseROM` and `NDSCart::ParseROM` overloads that accept `unique_ptr<u8[]>`
- The `u8*` overloads delegate to these new overloads
- Also move `SetupSave` for both kinds of carts to be private non-virtual methods
* Finalize the `NDSCart` refactor
- Add `NDSCartArgs` to pass to `ParseROM`
- Add SRAM arguments for all retail carts
- Initialize SRAM inside the constructor
- Delegate to other constructors where possible
* Replace `ROMManager::NDSSave` and `GBASave` with `unique_ptr`
* Make both cart slots return the previously-inserted cart in `EjectCart`
- Primarily intended for reusing carts when resetting the console
* Make `NDS::EjectCart` return the old cart
* Initialize both cart slots with the provided ROM (if any)
* Make `NDS::EjectGBACart` return the ejected cart
* Clean up some comments in Args.h
* Rename `ROMManager::LoadBIOS` to `BootToMenu`
- Clarifies the intent
* Add `ROMManager::LoadDLDISDCard`
* Add a doc comment
* Refactor how the `NDS` is created or updated
- Rewrite `CreateConsole` to read from `Config` and load system files, but accept carts as arguments
- Fail without creating an `NDS` if any required system file doesn't load
- Add `UpdateConsole`, which delegates to `CreateConsole` if switching modes or starting the app
- Use `std::variant` to indicate whether a cart should be removed, inserted, or reused
- Load all system files (plus SD cards) in `UpdateConsole`
- Eject the cart and reinsert it into the new console if applicable
* Respect some more `Config` settings in the `Load*` functions
* Remove `InstallNAND` in favor of `LoadNAND`
* Fix some potential bugs in `LoadROMData`
* Oops, forgot to delete the definition of `InstallNAND`
* Add functions to get `FATStorageArgs`
- Not the cards themselves, but to get the arguments you _would_ use to load the cards
* Refactor `ROMManager::LoadROM`
- Load the ROM and save data before trying to initialize the console
* Clean up `ROMManager::Reset` and `BootToMenu`
- Let `EmuThread::UpdateConsole` do the heavy lifting
* Clean up `LoadGBAROM`
* Remove some unused functions
* Set the default DSi BIOS to be broken in `DSiArgs`
* Respect `Config::DSiFullBIOSBoot` when loading DSi BIOS files
* Remove some more unused functions
* Remove redundant `virtual` specifiers
* Refactor `NDSCart::CartCommon::Type()` to return a member instead of a constant
- One less virtual dispatch
- The cart type is read in `NDSCartSlot::DoSavestate`, which is a path downstream (due to rewinding)
* Remove a hash that I computed for debugging purposes
* Make `ByteSwap` `constexpr`
* Remove an unused `#include`
* Remove unnecessary functions from the NDS carts
- Mostly overrides that added nothing
* Default-initialize all NDSCart fields
* Make `GBACart::Type()` not rely on virtual dispatch
- `GBACartSlot::DoSavestate` calls it, and savestates can be a hot path downstream
* Don't forget to reset the base class in `CartGameSolarSensor::Reset()`
* Remove redundant `virtual` specifiers
* Default-initialize some fields in `GBACart`
* Fix ROMs not loading from archives in the frontend
- Whoops
* Change how the `Firmware` member is declared
* Forgot an include in Utils.cpp
* Rename `FirmwareMem::Firmware` to `FirmwareData` to fix a build error on Linux
- One of these days I'll convince you people to let me use `camelCaseMemberNames`
* Add `override` to places in `DSi_MMCStorage` that warrant it
* Fix firmware saving on the frontend
- Remove `GetConfigString` and `ConfigEntry::WifiSettingsPath` while I'm at it
* Add a non-const `GetNAND()`
* Move `SPUChannel` and `SPUCaptureUnit` to be stored inside `array`s instead of allocated separately
* Default-initialize most of `SPU`'s fields
* Generate the interpolation tables at compile-time with `constexpr`
- Now it's faster and thread-safe
* Slight cleanup in SPU
- Iniitialize most fields in the class declaration
* Mark `SPU` as `explicit`
* Give `GPU2D::Unit` a virtual destructor
- Undefined behavior avoided!
* Add an `array2d` alias
* Move various parts of `GPU2D::SoftRenderer` to `constexpr`
- `SoftRenderer::MosaicTable` is now initialized at compile-time
- Most of the `SoftRenderer::Color*` functions are now `constexpr`
- The aforementioned functions are used with a constant value in at least one place, so they'll be at least partially computed at compile-time
* Generalize `GLRenderer::PrepareCaptureFrame`
- Declare it in the base `Renderer3D` class, but make it empty
* Remove unneeded `virtual` specifiers
* Store `Framebuffer`'s memory in `unique_ptr`s
- Reduce the risk of leaks this way
* Clean up how `GLCompositor` is initialized
- Return it as an `std::optional` instead of a `std::unique_ptr`
- Make `GLCompositor` movable
- Replace `GLCompositor`'s plain arrays with `std::array` to simplify moving
* Pass `GPU` to `GLCompositor`'s important functions instead of passing it to the constructor
* Move `GLCompositor` to be a field within `GLRenderer`
- Some methods were moved up and made `virtual`
* Fix some linker errors
* Set the renderer in the frontend
* Remove unneeded `virtual` specifiers
* Remove `RenderSettings` in favor of just exposing the relevant member variables
* Update the frontend to accommodate the core changes
* Add `constexpr` and `const` to places in the interpolator
* Qualify references to `size_t`
* Construct the `optional` directly instead of using `make_optional`
- It makes the Linux build choke
- I think it's because `GLCompositor`'s constructor is `private`
* First crack at refactoring NDS and DSi into objects
- Remove all global/`static` variables in `NDS` and related classes
- Rely more on virtual dispatch when we need to pick methods at runtime
- Pass `NDS&` or `DSi&` to its constituent components where necessary
- Introduce some headers or move some definitions to break `#include` cycles
* Refactor the frontend to accommodate the core's changes
* Move up `SchedList`'s declaration
- Move it to before the components are initialized so the `map`s inside are initialized
- Fields in C++ are initialized in the order they're declared
* Fix a crash when allocating memory
* Fix JIT-free builds
* Fix GDB-free builds
* Fix Linux builds
- Explicitly qualify some member types in NDS, since they share the same name as their classes
* Remove an unnecessary template argument
- This was causing the build to fail on macOS
* Fix ARM and Android builds
* Rename `Constants.h` to `MemConstants.h`
* Add `NDS::IsRunning()`
* Use an `#include` guard instead of `#pragma once`
Nadia Holmquist Pedersen