* get this started
* implement DSi RTC commands
* set up RTC clock timer. lay down basic idea of a clock.
* make the date/time registers writable
* move RTC state to its own structure, to make it easier to deal with
* more RTC work
lay base for date/time dialog
* get the bulk of the RTC functionality going
* much simpler design for RTC stuff
* aha, that is what it is
* start working on the RTC IRQ
* implement all types of RTC IRQ
* start refining sleep mode. code still kinda sucks.
* implement keypad IRQ
* refine it some more
* shut the fuck uuuuuupppppppppppppp
* Replace some standard I/O calls with Platform equivalents
- I missed a spot when I submitted that PR a few months ago
* Include <memory> in DSi_NAND.h
- Because it uses unique_ptr
* Split DSi_NAND::ReadHardwareInfo into ReadSerialData and ReadHardwareInfoN
* Add a RegionMask enum
* Move DSi NAND patching to the frontend
* Add DSiSupportedLanguageMask
- Not currently used by the frontend, but I use it in melonDS DS
* Remove some Platform::ConfigEntry values
- The core no longer needs to know about them
- The corresponding Config values are unchanged
* Mark NANDMount's destructor as noexcept
* Slight polish to DMA
- Default-initialize members explicitly
- Mark some methods as const noexcept
- Initialize DMA::MRAMBurstTable to DMATiming::MRAMDummy
- Use the default destructor
* Move DMA_Timings definitions to a source file
- To ensure constant and unique addresses
* Include some extra DMA members in the savestate
* Simplify serializing the DMA table
- Extend the dummy table to 256 bytes (same length as the real ones)
* Revert the type change to DMA::DoSavestate
* Keep the MRAMBurstTable inside the DMA class, instead of using a pointer
- If we use a pointer to an external table, then we can't use it in savestates (else that external table gets overwritten)
* gdbstub beginnings
* gdbstub: finish gdb impl things, next up is integration with melonDS
* holy fuck the gdbstub works
* gdb breakpoints work, but there's a mysterious crash on continue
* fix memory corruption that sometimes happened, and make resetting the console thru gdb work
* remove some gdb debug printing
* fix things in gdbstub
* separate option for enabling gdbstub
* add mode-dependent CPU registers
* C++ize the GDBstub code
* add gdbstub config in emu settings dialog
* make sure gdb is disabled when jit is enabled
* Remove unnecessary compiler flags, mark ARMJIT assembly code as no-execute-stack
This hardens the binary a little bit against common exploitation methods
* add option to wait for debugger attach on startup
* only insert GNU stack notes on linux
* disable gdbstub enable checkbox when jit is enabled
* fix non-linux incompatibilities
* enable gdbstub by default
* fix issues with gdbstub settings disable stuff
* format stuff
* update gdb test code
* Fix segfault when calling StubCallbacks->GetCPU()
C++ overrides are hard. Please I'm just a lowly C programmer.
* fix packet size not being sent correctly
Thanks to @GlowingUmbreon on Github for troubleshooting this
* fix select(2) calls (i should read docs more properly)
* fix GDB command sequencing/parsing issue (hopefully)
* [GDB] implement no-ack mode
* fix sending ack on handshake
* get lldb to work
* Refactor diskio's contents
- Change ff_disk_read_cb/write_cb into a std::function instead of a raw pointer
- Add const specifiers as needed
* Refactor DSi_NAND to manage the file system's mounted lifetime with RAII
* Split NANDMount into NANDMount and NANDImage
- NANDImage is used for information about the NAND that doesn't require decryption or filesystem access
- NANDMount is used to actually access the file system
- Both classes manage their respective resources (the NAND file handle and the NAND's mount) with RAII
- Also split the file loading into another function that I will remove in a later PR
* Make NANDMount immovable
* Remove NAND-loading code that I had sectioned off into a function
- Incomplete copypasta
- I must have gotten distracted
* Tidy up NANDImage's initialization
- Don't unmount the disk image if the constructor fails (that's NANDMount's job now)
- Only assign CurFile if the constructor succeeds
* Add some const-correctness
* Move DSi NAND initialization to the frontend
- The NANDImage is now installed via a unique_ptr in DSi
* Remove Platform::DSi_NANDPath
- Not Config::DSiNANDPath; that can still be configured as usual
- The core no longer needs to care
* Add DSiFirmwareSystemSettings
* Replace DSiFirmwareSystemSettings::TouchCalibration fields with std::arrays
- So assignment can be done in one line
* Make DSiFirmwareSystemSettings a union
- So its bytes can be accessed
* Add a comment
* Use DSiFirmwareSystemSettings instead of raw byte offsets
* Add definitions for DSiSerialData and DSiHardwareInfoN
* Move DSiFirmwareSystemSettings's hash update logic into its own method
* Introduce firmware-related structs
* Fix some indents
* Move the generated firmware identifier to a constant
* Document the WifiAccessPoint constructors
* Add some constants
* Remove a stray comment
* Implement Firmware::UserData
* Add Firmware::Mask
* Document Firmware::Buffer
* Add a Firmware constructor that uses a FileHandle
* Set the default username in UserData
* Update the UserData checksum
* Forgot to include Platform.h
* Remove some redundant assignments in the default Firmware constructor
* const-ify CRC16
* Replace the plain Firmware buffer with a Firmware object
- Remove some functions that were reimplemented in the Firmware constructors
* Fix some crashes due to undefined behavior
* Fix the user data initialization
- Initialize both user data objects to default
- Set both user data objects to the same touch screen calibration
* Follow the DS logic in determining which user data section is current
* Remove an unneeded include
* Remove another unneeded include
* Initialize FirmwareMask in Firmware::Firmware
* Use the DEFAULT_SSID constant
* Add SPI_Firmware::InstallFirmware and SPI_Firmware::RemoveFirmware
* Move a logging call to after the file is written
* Add a SaveManager for the firmware
* Touch up the SPI_Firmware::Firmware declaration
* Move all firmware loading and customization to the frontend
* Call Platform::WriteFirmware when it's time to write the firmware back to disk
* Fix some missing stuff
* Remove the Get* functions from SPI_Firmware in favor of GetFirmware()
* Implement SPI_Firmware::DeInit in terms of RemoveFirmware
* Add Firmware::UpdateChecksums
* Fix an incorrect length
* Update all checksums in the firmware after setting touch screen calibration data
* Use the Firmware object's Position methods
* Remove register fields from the Firmware object
* Install the firmware before seeing if direct boot is necessary
* Install the firmware before calling NDS::Reset in LoadROM
* Slight cleanup in ROMManager
* Fix the default access point name
* Shorten the various getters in Firmware
* Add qualifiers for certain uses of firmware types
- GCC can get picky if -fpermissive isn't defined
* Add an InstallFirmware overload that takes a unique_ptr
* Log when firmware is added or removed
* Don't clear the firmware in SPI_Firmware::Init
- The original code didn't, it just set the pointer to nullptr
* Fix a typo
* Write back the full firmware if it's not generated
* Move the FreeBIOS to an external file
* Load wfcsettings.bin into the correct part of the generated firmware blob
* Load BIOS files in the frontend, not in the core
* Fix logging the firmware ID
* Add some utility functions
* Mark Firmware's constructors as explicit
* Remove obsolete ConfigEntry values
* Include <locale> explicitly in ROMManager
* Fix up some includes
* Add Firmware::IsBootable()
* Add a newline to a log entry
- Whoops
* Log the number of bytes written out in SaveManager
* Mark FirmwareHeader's constructor as explicit
* Clean up GenerateDefaultFirmware and LoadFirmwareFromFile
- Now they return a pair instead of two by-ref values
* Refactor SaveManager a little bit
- Manage its buffers as unique_ptrs to mitigate leaks
- Reallocate the internal buffer if SetPath is asked to reload the file (and the new length is different)
* Remove some stray parens
* Fix some firmware-related bugs I introduced
- Firmware settings are now properly saved to disk (beforehand I misunderstood when the firmware blob was written)
- Firmware is no longer overwritten by contents of wfcsettings.bin
* Slight cleanup
* Make cleanup a little more robust to mitigate undefined behavior
- Add some null checks before cleaning up the GPU3D renderer
- Make sure that all deleted objects are null
- Move cleanup logic out of an assert call
- Note that deleting a null pointer is a no-op, so there's no need to check for null beforehand
- Use RAII for GLCompositor instead of Init/DeInit methods
* Replace a DeInit call that I missed
* Make ARMJIT_Memory less likely to generate errors
- Set FastMem7/9Start to nullptr at the end
- Only close and unmap the file if it's initialized
* Make Renderer3D manage its resources with RAII
* Don't try to deallocate frontend resources that aren't loaded
* Make ARMJIT_Memory::DeInit more robust on the Switch
* Reset MemoryFile on Windows to INVALID_HANDLE_VALUE, not nullptr
- There is a difference
* Don't explicitly store a Valid state in GLCompositor or the 3D renderers
- Instead, create them with static methods while making the actual constructors private
* Make initialization of OpenGL resources fail if OpenGL isn't loaded
* assert that OpenGL is loaded instead of returning failure
CRC32.cpp:
Make table initialization compile time
DSi_NAND.cpp:
Fix file close / unmount / disk close on error
~L427: Remove redundant calls, as they are immediately rendered useless by `rem` being overwritten
NDS.cpp / FreeBIOS.h:
Remove unneeded size values in header
Remove unneeded memset's as they are initialized anyway
sha1.c / sha1.h:
Fix useless warning
Wifi.cpp:
Remove unneeded includes
DSi.cpp:
Reduce ugly casts
Deduplicate code
qt_sdl/main.cpp:
silence clang switch statement warning
qt_sdl/main.h:
fix override warnings
dolphin/BitSet.h:
use msvc extensions only when appropriate, fix broken bit set count under _WIN32
* fix edge fill rules for swapped polygons
also fixes translucent polygons not being always edge filled.
* fix right edge fill rule
* fix right edge fill rule for realsies
* fix a few more glitchy polygons
specifically quads similar to: (-67,40) (64, 160) (192, 160), (8, 111)
* fix one edge case pixel
i hate this so much
* fix "flat bottom" edge fill
* fix regression + apply changes to shadow masks
fix a regression with certain line polygons not rendering; there seems to be an exception made by the ds' gpu in order for these polygons to render properly.
also apply these changes to shadow masks because i forgot to
* forgot to remove a line
---------
Co-authored-by: Arisotura <thetotalworm@gmail.com>
* Make horizontal sprite mosaic (more) accurate
* Vertical sprite mosaic should not extend the sprite's bounding area
* Vertical sprite mosaic should not extend the sprite's bounding area (2)
* OBJIndex is no longer needed
* fix polygons being swapped incorrectly
"borrowed" this from noods
needs verification that the >= and <= signs aren't actually supposed to be > and <
* proper rules for moving vertical right slopes left
* nvm most of that was actually pointless
that's on me for not checking
Jesse Talavera-Greenberg