Commit Graph

74 Commits

Author SHA1 Message Date
degasus 21970c4a2a VideoCommon: cleanup OpcodeDecoder 2014-12-09 18:56:27 +01:00
degasus 4b22885ed8 VideoCommon: fifo cleanups 2014-12-09 18:56:27 +01:00
skidau 3d448e49c6 Update CPStatus before processing the FIFO events and force an exception check on interrupts.
Added more information into the FIFO unknown opcode error message.
2014-11-19 12:48:08 +11:00
degasus 90613a1bda OpcodeDecoder: Skip recursiv display lists 2014-11-15 16:24:06 +01:00
Lioncash 884ec2ed13 Host: Kill off Host_SysMessage
Equivalent facilities already exist.
2014-11-05 02:30:48 -05:00
comex 65af90669b Add the 'desynced GPU thread' mode.
It's a relatively big commit (less big with -w), but it's hard to test
any of this separately...

The basic problem is that in netplay or movies, the state of the CPU
must be deterministic, including when the game receives notification
that the GPU has processed FIFO data.  Dual core mode notifies the game
whenever the GPU thread actually gets around to doing the work, so it
isn't deterministic.  Single core mode is because it notifies the game
'instantly' (after processing the data synchronously), but it's too slow
for many systems and games.

My old dc-netplay branch worked as follows: everything worked as normal
except the state of the CP registers was a lie, and the CPU thread only
delivered results when idle detection triggered (waiting for the GPU if
they weren't ready at that point).  Usually, a game is idle iff all the
work for the frame has been done, except for a small amount of work
depending on the GPU result, so neither the CPU or the GPU waiting on
the other affected performance much.  However, it's possible that the
game could be waiting for some earlier interrupt, and any of several
games which, for whatever reason, never went into a detectable idle
(even when I tried to improve the detection) would never receive results
at all.  (The current method should have better compatibility, but it
also has slightly higher overhead and breaks some other things, so I
want to reimplement this, hopefully with less impact on the code, in the
future.)

With this commit, the basic idea is that the CPU thread acts as if the
work has been done instantly, like single core mode, but actually hands
it off asynchronously to the GPU thread (after backing up some data that
the game might change in memory before it's actually done).  Since the
work isn't done, any feedback from the GPU to the CPU, such as real
XFB/EFB copies (virtual are OK), EFB pokes, performance queries, etc. is
broken; but most games work with these options disabled, and there is no
need to try to detect what the CPU thread is doing.

Technically: when the flag g_use_deterministic_gpu_thread (currently
stuck on) is on, the CPU thread calls RunGpu like in single core mode.
This function synchronously copies the data from the FIFO to the
internal video buffer and updates the CP registers, interrupts, etc.
However, instead of the regular ReadDataFromFifo followed by running the
opcode decoder, it runs ReadDataFromFifoOnCPU ->
OpcodeDecoder_Preprocess, which relatively quickly scans through the
FIFO data, detects SetFinish calls etc., which are immediately fired,
and saves certain associated data from memory (e.g. display lists) in
AuxBuffers (a parallel stream to the main FIFO, which is a bit slow at
the moment), before handing the data off to the GPU thread to actually
render.  That makes up the bulk of this commit.

In various circumstances, including the aforementioned EFB pokes and
performance queries as well as swap requests (i.e. the end of a frame -
we don't want the CPU potentially pumping out frames too quickly and the
GPU falling behind*), SyncGPU is called to wait for actual completion.

The overhead mainly comes from OpcodeDecoder_Preprocess (which is,
again, synchronous), as well as the actual copying.

Currently, display lists and such are escrowed from main memory even
though they usually won't change over the course of a frame, and
textures are not even though they might, resulting in a small chance of
graphical glitches.  When the texture locking (i.e. fault on write) code
lands, I can make this all correct and maybe a little faster.

* This suggests an alternate determinism method of just delaying results
until a short time before the end of each frame.  For all I know this
might mostly work - I haven't tried it - but if any significant work
hinges on the competion of render to texture etc., the frame will be
missed.
2014-09-28 21:34:29 -04:00
comex 0ae9e398c8 Rejigger some FIFO buffer variables to be more rational.
videoBuffer -> s_video_buffer
size -> s_video_buffer_write_ptr
g_pVideoData -> g_video_buffer_read_ptr (impl moved to Fifo.cpp)

This eradicates the wonderful use of 'size' as a global name, and makes
it clear that s_video_buffer_write_ptr and g_video_buffer_read_ptr are
the two ends of the FIFO buffer s_video_buffer.

Oh, and remove a useless namespace {}.
2014-09-28 21:25:12 -04:00
Rohit Nirmal fbc64984ca Include CommonTypes.h instead of Common.h. 2014-09-08 15:39:58 -04:00
Dolphin Bot 830a03c540 Merge pull request #957 from degasus/frame_skipping
VideoCommon: rewrite frame skipping code
2014-09-04 18:27:19 +02:00
degasus 8b84ddce9a VideoCommon: rewrite frame skipping code 2014-09-04 18:07:39 +02:00
degasus ef6f6a7fa9 VideoCommon: remove XFReg copy optimization
This code is just ugly and I doubt there is a way that copying twice is faster.
2014-09-04 17:56:17 +02:00
comex 608f9bcd67 Refactor opcode decoding a bit to kill FifoCommandRunnable.
Separated out from my gpu-determinism branch by request.  It's not a big
commit; I just like to write long commit messages.

The main reason to kill it is hopefully a slight performance improvement
from avoiding the double switch (especially in single core mode);
however, this also improves cycle calculation, as described below.

- FifoCommandRunnable is removed; in its stead, Decode returns the
number of cycles (which only matters for "sync" GPU mode), or 0 if there
was not enough data, and is also responsible for unknown opcode alerts.

Decode and DecodeSemiNop are almost identical, so the latter is replaced
with a skipped_frame parameter to Decode.  Doesn't mean we can't improve
skipped_frame mode to do less work; if, at such a point, branching on it
has too much overhead (it certainly won't now), it can always be changed
to a template parameter.

- FifoCommandRunnable used a fixed, large cycle count for display lists,
regardless of the contents.  Presumably the actual hardware's processing
time is mostly the processing time of whatever commands are in the list,
and with this change InterpretDisplayList can just return the list's
cycle count to be added to the total.  (Since the calculation for this
is part of Decode, it didn't seem easy to split this change up.)

To facilitate this, Decode also gains an explicit 'end' parameter in
lieu of FifoCommandRunnable's call to GetVideoBufferEndPtr, which can
point to there or to the end of a display list (or elsewhere in
gpu-determinism, but that's another story).  Also, as a small
optimization, InterpretDisplayList now calls OpcodeDecoder_Run rather
than having its own Decode loop, to allow Decode to be inlined (haven't
checked whether this actually happens though).

skipped_frame mode still does not traverse display lists and uses the
old fake value of 45 cycles.  degasus has suggested that this hack is
not essential for performance and can be removed, but I want to separate
any potential performance impact of that from this commit.
2014-09-01 14:35:23 -04:00
comex 45a4236283 A tiny restructuring to allow inlining of FifoCommandRunnable. Probably useless. 2014-08-26 12:43:39 -04:00
degasus 7e79806efc remove unused globals
Also change globals into statics which are only used in one file
2014-07-11 16:10:20 +02:00
degasus 22e1aa5bb4 mark all local functions as static 2014-07-11 16:07:23 +02:00
degasus f1ddd3c66a VideoCommon: remove unused stats 2014-06-27 09:35:26 +02:00
Lioncash ce54c1e571 Kill off replaceable usages of s[n]printf. 2014-06-18 19:53:38 -04:00
magumagu 369c0c4ce2 Opcode decoding: 0xC0 isn't a valid command.
Fix our opcode decoders to handle this appropriately.
2014-05-08 15:49:19 -07:00
Tillmann Karras d802d39281 clang-modernize -use-nullptr
and s/\bNULL\b/nullptr/g for *.cpp/h/mm files not compiled on my machine
2014-03-09 21:14:26 +01:00
Pierre Bourdon ffe588cc24 Fix more header sorting issues in VideoCommon/ (now check-includes clean). 2014-02-20 01:01:10 +01:00
Lioncash 2afe215271 Convert all includes to relative paths. 2014-02-18 02:19:10 -05:00
Lioncash 3fd87a7636 Second and final pass of clearing out tabs. 2014-02-17 02:19:41 -05:00
degasus 010a0d481a VideoCommon: remove Cache Displaylist
This option was known to break every second game and only boost a bit.
It also seems to be broken because of streaming into pinned memory and buffer storage buffers.

v2: also remove dlc_desc
2014-01-31 07:30:55 +01:00
Jasper St. Pierre 34692ab826 Remove unnecessary Src/ folders 2013-12-31 14:03:19 -05:00