0a290f5d11
Merge pull request #6607 from lioncash/ppc
...
PPCDebugInterface: Remove redundant HostRead_U32() call in Disassemble()
2018-04-08 10:25:43 +02:00
2a535d5a55
Merge pull request #6608 from lioncash/gekko
...
Gekko: In-class initialize members where applicable
2018-04-08 10:23:42 +02:00
219728dbd4
Merge pull request #6609 from lioncash/ufpr
...
Gekko: Remove unused UFPR union
2018-04-08 10:22:43 +02:00
3d10344561
Merge pull request #6610 from lioncash/swap
...
Common/Swap: Amend BigEndianValue's operator= to return a reference to the object rather than returning void
2018-04-08 10:22:10 +02:00
88a80f118c
Common/Swap: Amend BigEndianValue's operator= to return a reference to the object rather than returning void
...
The general convention is to return a reference to the object that was
acted on, otherwise you can get into situations with errors because the
type wasn't being propagated properly
2018-04-08 01:22:18 -04:00
5d1349f9c7
Gekko: Remove unused UFPR union
...
Using this in its current form would invoke undefined behavior, as it's
using a union to type pun between data types. It's also, well, unused,
so we don't need to keep it around.
2018-04-07 22:30:26 -04:00
d5555b49e9
Gekko: In-class initialize members where applicable
...
Allows defaulting the default constructor. Also moves assignment to
initializer lists where applicable as well.
2018-04-07 22:26:24 -04:00
3e50b0e320
PPCDebugInterface: Remove redundant HostRead_U32() call in Disassemble()
...
We already read the necessary information with the
HostRead_Instruction() call. Internally, it calls HostRead_U32() as
well, so there's no difference in behavior.
2018-04-07 22:20:59 -04:00
75574b7b97
Merge pull request #6565 from leoetlino/fs-timing
...
IOS: Emulate filesystem timings
2018-04-07 23:47:09 +02:00
f4a2ad3c88
IOS/FS: Emulate read/write/close/seek timing
...
Also bumps up the state version.
2018-04-07 23:35:28 +02:00
42983c0bd3
IOS/FS: Emulate superblock write timing
2018-04-07 23:35:28 +02:00
b74577ff43
IOS/FS: Emulate GetAttr() timing
2018-04-07 23:35:28 +02:00
896d875187
IOS/FS: Emulate Open() timing
2018-04-07 23:35:28 +02:00
32b1409cbd
IOS/FS: Use hardware tested minimum reply time
...
...instead of an arbitrary guess.
2018-04-07 23:35:28 +02:00
bb38b612ba
Merge pull request #6602 from lioncash/xxhash
...
CMakeLists: Don't dump xxhash's includes into top-level directory scope
2018-04-07 23:31:13 +02:00
7dff069659
Merge pull request #6605 from spycrab/gc_fix_rumble
...
[RFC] Core/GC: Fix rumble for "Luigi's Mansion"
2018-04-07 23:23:30 +02:00
eed066e8a7
Core/GC: Fix rumble for "Luigi's Mansion"
2018-04-07 22:13:01 +02:00
5ed12b45ec
Merge pull request #6603 from orbea/ffmpeg
...
[AVIDump] fix compilation on Linux
2018-04-06 23:49:29 -04:00
9e2806c181
[AVIDump] fix compilation issues on Linux
2018-04-06 19:53:10 -07:00
a4ba92c697
CMakeLists: Don't dump xxhash's includes into top-level directory scope
...
We already use a custom CMakeLists file for xxhash, so we can just make it's headers
public as part of its target interface.
This way, only libraries that link in the xxhash target will see its headers, as opposed
to every target under the top-level directory.
2018-04-06 10:41:58 -04:00
a957bd1ecc
Merge pull request #6421 from leoetlino/fs-interface
...
IOS: Refactor the filesystem code
2018-04-06 12:17:09 +02:00
c2fa6f5bee
Merge pull request #6599 from lioncash/cmake-option
...
CMakeLists: Move build options to the top of the file
2018-04-06 12:13:34 +02:00
cc3a98ad08
Merge pull request #6601 from lioncash/mkdir
...
DolphinWX/DolphinQt2 CMakeLists: Use cmake -E instead of mkdir -p for creating language directories
2018-04-06 12:01:28 +02:00
3e946d87e4
DolphinWX/DolphinQt2 CMakeLists: Use cmake -E instead of mkdir -p for creating language directories
...
CMake already has this functionality built-in. This lessens depending on the host system environment
and is more cross-platform friendly (which is always nice from a build-system point of view).
2018-04-05 12:49:33 -04:00
a3bdb5d85e
Merge pull request #6598 from lioncash/target
...
DolphinQt2/CMakeLists: Use the target_* equivalents of add_definitions and include_directories
2018-04-05 17:53:24 +02:00
4cd5ef76ad
Merge pull request #6537 from spycrab/qt_quick_assign
...
Qt/Mapping: Implement "Iterative Input"
2018-04-05 17:44:30 +02:00
a66c7d6a64
Merge pull request #6600 from lioncash/leak
...
DolphinQt2/MainWindow: Resolve a memory leak on systems with X11
2018-04-05 17:42:15 +02:00
839fc7e749
DolphinQt2/MainWindow: Resolve a memory leak on systems with X11
...
In the case we had X11 libs available, we'd allocate an XRRConfiguration instance and pass it
to the GraphicsWindow instance, but it would never actually be freed.
2018-04-05 09:07:08 -04:00
b4e36bbd27
CMakeLists: Move build options to the top of the file
...
Makes the configurable aspects of the build more immediately discoverable
as opposed to needing to read down the entire file.
2018-04-05 08:27:49 -04:00
9c27c7eda8
DolphinQt2/CMakeLists: Use the target_* equivalents of add_definitions and include_directories
...
add_definitions and include_directories don't operate on a by-target basis, they act on a
by-directory basis (i.e. if we defined two targets, A and B, in this CMakeLists file, add_definitions
would add the definitions to the COMPILE_DEFINITIONS directory property which both A and B would
implicitly use).
The same idea applies to include_directories, only it appends to the INCLUDE_DIRECTORIES directory
property.
Instead, specify these on the target to keep scope as narrow as possible.
2018-04-05 07:52:25 -04:00
d0b7c013a1
Merge pull request #6593 from lioncash/headless
...
DolphinNoGUI/CMakeLists: Remove the use of SRCS and LIBS variables
2018-04-05 10:07:31 +02:00
39cb22ddc9
Merge pull request #6594 from lioncash/qt
...
DolphinQt2/CMakeLists: Specify Qt libraries via COMPONENTS in the find_package call
2018-04-05 10:03:41 +02:00
a9cd67125c
Merge pull request #6597 from lioncash/fp-load-store
...
Interpreter_LoadStore: Generate alignment exceptions if an FP load/store instruction's effective address is not word aligned
2018-04-05 09:55:49 +02:00
a8821839da
Merge pull request #6596 from lioncash/dcbz
...
Interpreter_LoadStore: Generate alignment exceptions if dcbz or dcbz_l are executed with the data cache disabled
2018-04-05 08:46:36 +02:00
912c9490c0
Interpreter_LoadStore: Generate alignment exceptions if an FP load/store instruction's effective address is not word aligned
...
This is one of the conditions for an alignment exception documented in
the 750CL architecture reference manual in section 4.5.6, which also
applies to the Gekko microprocessor.
2018-04-05 00:30:53 -04:00
980f1641b5
Interpreter_LoadStore: Generate alignment exceptions if dcbz or dcbz_l are executed with the data cache disabled
...
This is an exception condition documented within section 4.5.6 in the
architecture reference manual for the PPC 750CL, which also applies to
the Gekko microprocessor.
Also moves dcbz_l's implementation out of Interpreter_Paired and beside
dcbz where it belongs.
2018-04-04 18:44:17 -04:00
e0ba2a4aeb
Qt: Implement "Iterative Input"
2018-04-04 21:51:51 +02:00
fb929ab8e5
DolphinQt2/CMakeLists: Specify Qt modules via COMPONENTS in the find_package call
...
Eliminates the need to find the individual modules separately
2018-04-04 15:05:20 -04:00
84ed6fd445
CMakeLists: Remove the LIBS variable
...
Now that we link all libraries in explicitly, the top-level LIBS variable can finally go.
2018-04-04 11:46:30 -04:00
6f694e435c
DolphinNoGUI/CMakeLists: Remove the use of SRCS and LIBS variables
...
Instead, operate on the target directly. This removes the last usages of the
SRCS and LIBS variables.
2018-04-04 11:42:57 -04:00
9be505fde2
Merge pull request #6473 from spycrab/qt_dbg_memory
...
Qt/Debugger: Implement "Memory" widget
2018-04-04 16:58:04 +02:00
4d5adf3dfa
Merge pull request #6588 from lioncash/cmake
...
DolphinWX/DolphinQt2 CMakeLists: Remove use of LIBS and SRCS variables
2018-04-04 16:57:01 +02:00
5e4446c313
DolphinQt2/CMakeLists: Remove usages of LIBS and SRCS variables
...
Instead, operate on the target itself. Also removes the variable
representing the name of the target. We can just refer to this directly
2018-04-04 09:09:45 -04:00
95ae4b34d9
Qt/Debugger: Implement "Memory" widget
2018-04-04 13:43:30 +02:00
c6d0d9a01f
Merge pull request #6578 from JosJuice/remove-projection-hacks
...
Remove support for projection hacks
2018-04-04 09:10:32 +02:00
ba42238b0b
Merge pull request #6592 from lioncash/imagine-le-ppc
...
Interpreter_LoadStore: Generate alignment exceptions if lmw, lswi, lswx, stmw, stswi, or stswx is executed when the MSR[LE] bit is set
2018-04-04 09:00:45 +02:00
b82539e927
Merge pull request #6589 from lioncash/jni
...
Android/CMakeLists: Remove usages of LIBS and SRCS variables
2018-04-04 08:57:10 +02:00
3ea0a37d72
Interpreter_LoadStore: Generate alignment exceptions if lmw, lswi, lswx, stmw, stswi, or stswx is executed when the MSR[LE] bit is set
...
Improves exception accuracy regarding an admittedly very unlikely
scenario.
2018-04-03 20:47:40 -04:00
88853551e6
Merge pull request #6590 from lioncash/hires
...
HiresTexture: Correct texture hashes
2018-04-03 19:00:28 -04:00
74aff4d9ef
HiresTexture: Correct texture hashes
...
Fixes a regression introduced in 2da8d98b2f
2018-04-03 12:42:05 -04:00
Léo Lam