Don't rely on trailing /'s in directory names.
Destdir only works for global builds.
Only tar up global builds if they are in a destdir to
avoid SCons eating all available memory indexing /usr.
Print current status of shared_foo in 'scons -h'.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5966 8ced0084-cf51-0410-be5f-012b33b47a6e
The new default wiiuse wiimote read timeout of 30ms has been overridden previously by the default 10ms from the wiimoteplugin.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5965 8ced0084-cf51-0410-be5f-012b33b47a6e
- More removal of unnecessary code
- Windows: Modification of Wiiuse_Find under windows,
instead of always deleting and recreating the whole wiimote_t struct, we do maintain the old one,
adding/removing new wiimotes to/from it
- some wiimote bugfixes, see below for details
Windows related stuff:
Fixed most of the disconnection issues (single and mulitple real wiimotes, both wiimote plugins) (I haven't had a disconnect msg in hours anymore(ms stack)).
Rumble bug should be fixed now(both plugins,pls verify).
Fixed some pair up issues( sometimes you had to press the pair up button up to 3 times, till it paired up your wiimote).
More dongles might be now supported via ms stack, pls try and report back!
Fixed a problem where multiple wiimotes would swap slots on pair-up/addition of a real wiimote (2-4 real wiimotes) (both plugins, but not integrated into new plugin).
Improved ingame auto-pairup for real wiimotes(thx to the new wiiuse_find routine).
Fixed a bug on setting wiimote timeouts, which means changing the timeout was just a dummy earlier.
Most of the stuff concerns stuff in the old wiimote plugin, dont worry, in the end it's important for both plugins. It will get ported to the new plugin sooner or later.:')
Some minor stuff.
This might break osx/linux build and maybe the new plugin realwiimote-wise only. Thx to glennrics to pointing me to some breakings on linux, I didn't fix them all.
PS I hope i haven't forgotten anything, enjoy.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5940 8ced0084-cf51-0410-be5f-012b33b47a6e
Also added a DSPCORE_STOP state. The DSP-LLE debugger window segmentation faults if it is openned when a game is not running.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5931 8ced0084-cf51-0410-be5f-012b33b47a6e
Should revisit and make the distinction more explicit.
Put the Data and Sys directories under Resources in the OS X app bundle.
Construct config.h (now lower-case to avoid confusion with other Config.h
instances in the tree) in the root. One tiny step towards a read-only
and cross-buildable source tree.
Some minor bits of non-Linux Unix portability.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5921 8ced0084-cf51-0410-be5f-012b33b47a6e
Use SCons' convenient # shorthand for the root of our tree.
Also various minor cleanup of SConscripts.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5915 8ced0084-cf51-0410-be5f-012b33b47a6e
few different variations that can be true depending on circumstances.
This would likely cover the _WIN32 case as well, but since I don't
pretend to fully understand just what is going on with wxWidgets
here, I can't really call this any less of a hack..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5794 8ced0084-cf51-0410-be5f-012b33b47a6e
Wiimotes are now slighty more responsive and multiple wiimotes should harmonize now slighty better. This clean up was requested/inevitable and should have be done way more earlier. This "might" break osx/linux builds, so please test. If your aware of any "real wiimote" issues please post it in the comments as well(dont forget to state your OS).
Known wiimote issues:
1.) Possible wiimote disconnect on pressing the home button
2.) 1-2 Possible wiimote disconnects directly after starting a game
3.) Rumble causes lag. I don't think this is a wiimote plugin issue itself, I'm not sure tho. It would be interesting to know whether the lag still happens on emulated wiimotes as well, when the game tries to rumble.
4.) Connecting(pairing up and refreshing) a 2nd/3rd/4th real wiimote while having a game running/paused, might swap player slots and cause disconnects at that moment.
If u have more issues, feel free to post them, to have them all here collected once more to get a brief overview.
Apart from that, increase the wiimote read timeout @settings(20-200). If your expecting frequent disconnects, restart dolphin, and don't open the wiimote gui before playing instead directly start games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5788 8ced0084-cf51-0410-be5f-012b33b47a6e
minor code changes and adding comments.
And issue fix 2792 with credits to Karloathian for finding and fixing it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5750 8ced0084-cf51-0410-be5f-012b33b47a6e
wiimotes, so that wiiuse_find has a chance to return early when that
number is found rather than wait for the 5 second timeout always.
Hide the auto-(re)connect UI elements on non-Windows so as not to
confuse users until that functionality is implemented generally.
Empty strings are not allowed in wxChoice lists.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5714 8ced0084-cf51-0410-be5f-012b33b47a6e
LZO/SFML/SOIL and subject to the same shared_foo exception options.
This makes building a self-contained distribution package much easier.
TBD: Cg and wxWidgets 2.9.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5712 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes a number of problems, including unreliable connection setup,
frequent disconnections, busy-waiting and shutdown deadlocks.
Motion Plus and nunchuk hot swapping now work and Wiiuse does a small
amount of queueing to prevent occasional dropped packets. The OS X
bluetooth stack has no internal input buffering and while a worker
thread can easily keep up with data coming from the Wiimote, the rest
of Dolphin can easily get behind if it is blocked by disk I/O or
similar. Mostly the Wiimote protocol recovers from dropped packets,
but sometimes the Wiimote would get out of sync and send a disconnect.
I wonder if the other platforms might benefit from a bit of queueing
at this layer as well.
Still doesn't support multiple devices, as I kept changing my mind
about how best to do it. I only have one Wiimote anyway..
One improvement to the Wiimote plugin that would be really nice would
be for the scan for new devices to operate continuously or periodically
like on a real Wii rather than just for 5 seconds at startup..
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5640 8ced0084-cf51-0410-be5f-012b33b47a6e
enable newline normalization
get revision number via `hg svn info` for svnrev.h
ignore incremental/generated binary files (windows/VS at least)
leave a comment if some files need native eol set in svnprops
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5637 8ced0084-cf51-0410-be5f-012b33b47a6e
We really should integrate the nowx functionality into the main build,
removing nowx and HAVE_WX checks and turning USE_WX into a variable
that defaults to GUI use but can be overridden at the command line.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5630 8ced0084-cf51-0410-be5f-012b33b47a6e
hotkey configuration working with wx 2.9, but it turned out to be
too tempting to use it to hack up OS X keyboard support using wx
key events in the "old" input plugins.
It was with some reluctance that I used PAD_Input (and copied it
for Wiimote as well) as that is clearly a deprecated interface,
but this way the hack is contained within the old plugins for when
the switchover to ControllerInterface happens.
The idea is to provide stable keyboard support on OS X for both
GCPad and Wiimote while we debug HID keyboard and real 'mote code.
It works pretty well, although the wx approach does impose a few
limitations like no arrow keys and left/right side modifier keys
are considered equivalent.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5622 8ced0084-cf51-0410-be5f-012b33b47a6e
Not only does it change tons of files to switch to a new and non-working (it doesn't parse my ini files, at least) ini parser, it also reshuffles a lot of code and removes a plugin. The latter part is fine, but doing these two major switches in one revision, one of which is broken, is completely unacceptable. I said to merge tiny changes, not massive reworkings.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5589 8ced0084-cf51-0410-be5f-012b33b47a6e
variables, writeable strings and dangerously shadowed variables.
index(), gamma(), exp() and y0() are POSIX functions and using those
names can cause namespace confusion.
A number of C files were missing the final newline required by ANSI C
and some versions of GCC are pedantic enough to complain about this.
These changes simply the scons build, allowing us to get rid of
filterWarnings which is simply more trouble than it's worth.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5574 8ced0084-cf51-0410-be5f-012b33b47a6e
Using Unix tools to operate on a tree containing filename with spaces in them
is really annoying, so rename the handful of instances where there were spaces.
Host.cpp has never been used.
Games tend to lookup the following directories that we don't yet have anything
to put in, so prepopulate them in Data/User/Wii:
title/00010001
title/00010002
title/00010003
title/00010004
title/00010005
title/00010006
title/00010007
meta
shared2/title
Set eol-style native on a number of text files which didn't already have it.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5572 8ced0084-cf51-0410-be5f-012b33b47a6e
Removing and adding some elements, making it more readable for others.
Off-Topic: Have fun at the Grandprix! May the best win:P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5536 8ced0084-cf51-0410-be5f-012b33b47a6e
Apparently, motionplus games are very strict on calibration data checksums, they don't like invalid/0x00'd checksums(this is trackable via 0x01 writes to the active extension register at 0xA400F3). I'll keep all motion plus related stuff that I've discovered on my blog: http://snzgoo.blogspot.com
Next time I'll fix the disconnects, which are most likely caused by the sent motionplus empty/dummy data.
So stage2 might come sooner than u guys thought. Let me hear u scream;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5522 8ced0084-cf51-0410-be5f-012b33b47a6e
Just minor stuff that needs to be finished: Dummy motionplus data needs to be kept dynamic(just like wiimote accel data), or it might cause disconnects after some time. Furthermore, there are 1-2 remaining register writes that have to be understood and emulated.(e.g. 0x00F3/F4). In the end just minor stuff. I'll address that in my next commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@5476 8ced0084-cf51-0410-be5f-012b33b47a6e
snzgoo