byuu says:
Changelog:
- fc/apu: improved phase duty cycle emulation (mode 3 is 25% phase
inverted; counter decrements)
- md/apu: power/reset do not cancel 68K bus requests
- md/apu: 68K is not granted bus access on Z80 power/reset
- md/controller: replaced System::Peripherals with ControllerPort
concept
- md/controller: CTRL port is now read-write, maintains value across
controller changes (and soon, soft resets)
- md/psg: PSG sampling rate unintentionally modified¹
- processor/spc700: improve cycle timing of (indirect),y instructions
[Overload]
- processor/spc700: idle() cycles actually read from the program
counter; much like the 6502 [Overload]
- some of the idle() cycles should read from other addresses; this
still needs to be supported
- processor/spc700: various cleanups to instruction function naming
- processor/z80: prefix state (HL→IX,IY override) can now be
serialized
- icarus: fix install rule for certain platforms (it wasn't buggy on
FreeBSD, but was on Linux?)
¹: the clock speed of the PSG is oscillator/15. But I was setting the
sampling rate to oscillator/15/16, which was around 223KHz. I am not
sure whether the PSG should be outputting at 3MHz or 223KHz. Amazingly
... I don't really hear a difference either way `o_O` I didn't actually
mean to make this change; I just noticed it after comparing the diff
between r01 and r02. If this turns out to be wrong, set
stream = Emulator::audio.createStream(1, frequency() / 16.0);
in md/psg.cpp to revert this change.
byuu says:
Changelog:
- SMS: added cartridge ROM/RAM mirroring (fixes Alex Kidd)
- SMS: fixed 8x16 sprite mode (fixes Wonder Boy, Ys graphics)
- Z80: emulated "ex (sp),hl" instruction
- Z80: fixed INx NF (should be set instead of cleared)
- Z80: fixed loop condition check for CPxR, INxR, LDxR, OTxR (fixes
walking in Wonder Boy)
- SFC: removed Debugger and sfc/debugger.hpp
- icarus: connected MS, GG, MD importing to the scan dialog
- PCE: added emulation skeleton to higan and icarus
At this point, Master System games are fairly highly compatible, sans
audio. Game Gear games are running, but I need to crop the resolution
and support the higher color palette that they can utilize. It's really
something else the way they handled the resolution shrink on that thing.
The last change is obviously going to be the biggest news.
I'm very well aware it's not an ideal time to start on a new emulation
core, with the MS and MD cores only just now coming to life with no
audio support.
But, for whatever reason, my heart's really set on working on the PC
Engine. I wanted to write the final higan skeleton core, and get things
ready so that whenever I'm in the mood to work on the PCE, I can do so.
The skeleton is far and away the most tedious and obnoxious part of the
emulator development, because it's basically all just lots of
boilerplate templated code, lots of new files to create, etc.
I really don't know how things are going to proceed ... but I can say
with 99.9% certainty that this will be the final brand new core ever
added to higan -- at least one written by me, that is. This was
basically the last system from my childhood that I ever cared about.
It's the last 2D system with games that I really enjoy playing. No other
system is worth dividing my efforts and reducing the quality and amount
of time to work on the systems I have.
In the future, there will be potential for FDS, Mega CD and PCE-CD
support. But those will all be add-ons, and they'll all be really
difficult and challenge the entire design of higan's UI (it's entirely
cartridge-driven at this time.) None of them will be entirely new cores
like this one.
byuu says:
Changelog:
- SMS: background VDP clips partial tiles on the left (math may not be
right ... it's hard to reason about)
- SMS: fix background VDP scroll locks
- SMS: fix VDP sprite coordinates
- SMS: paint black after the end of the visible display
- todo: shouldn't be a brute force at the end of the main VDP
loop, should happen in each rendering unit
- higan: removed emulator/debugger.hpp
- higan: removed privileged: access specifier
- SFC: removed debugger hooks
- todo: remove sfc/debugger.hpp
- Z80: fixed disassembly of (fd,dd) cb (displacement) (opcode)
instructions
- Z80: fix to prevent interrupts from firing between ix/iy prefixes
and opcodes
- todo: this is a rather hacky fix that could, if exploited, crash
the stack frame
- Z80: fix BIT flags
- Z80: fix ADD hl,reg flags
- Z80: fix CPD, CPI flags
- Z80: fix IND, INI flags
- Z80: fix INDR, INIT loop flag check
- Z80: fix OUTD, OUTI flags
- Z80: fix OTDR, OTIR loop flag check
byuu says:
Changelog:
- SMS: emulated the remaining 240 instructions in the (0xfd, 0xdd)
0xcb (displacement) (opcode) set
- 1/8th of these were "legal" instructions, and apparently games
use them a lot
- SMS: emulated the standard gamepad controllers
- reset button not emulated yet
The reset button is tricky. In every other case, reset is a hardware
thing that instantly reboots the entire machine.
But on the SMS, it's more like a gamepad button that's attached to the
front of the device. When you press it, it fires off a reset vector
interrupt and the gamepad polling routine lets you query the status of
the button.
Just having a reset option in the "Master System" hardware menu is not
sufficient to fully emulate the behavior. Even more annoying is that the
Game Gear doesn't have such a button, yet the core information structs
aren't flexible enough for the Master System to have it, and the Game
Gear to not have it, in the main menu. But that doesn't matter anyway,
since it won't work having it in the menu for the Master System.
So as a result, I'm going to have to have a new "input device" called
"Hardware" that has the "Reset" button listed under there. And for the
sake of consistency, I'm not sure if we should treat the other systems
the same way or not :/
byuu says:
Changelog:
- SMS: emulated the generic Sega memory mapper (none of the more
limited forms of it yet)
- (missing ROM shift, ROM write enable emulation -- no commercial
games use either, though)
- SMS: bus I/O returns 0xff instead of 0x00 so games don't think every
key is being pressed at once
- (this is a hack until I implement proper controller pad reading)
- SMS: very limited protection against reading/writing past the end of
ROM/RAM (todo: should mirror)
- SMS: VDP background HSCROLL subtracts, rather than adds, to the
offset (unlike VSCROLL)
- SMS: VDP VSCROLL is 9-bit, modulates voffset+vscroll to 224 in
192-line mode (32x28 tilemap)
- SMS: VDP tiledata for backgrounds and sprites use `7-(x&7)` rather
than `(x&7)`
- SMS: fix output color to be 6-bit rather than 5-bit
- SMS: left clip uses register `#7`, not palette color `#7`
- (todo: do we want `color[reg7]` or `color[16 + reg7]`?)
- SMS: refined handling of 0xcb, 0xed prefixes in the Z80 core and its
disassembler
- SMS: emulated (0xfd, 0xdd) 0xcb opcodes 0x00-0x0f (still missing
0x10-0xff)
- SMS: fixed 0xcb 0b-----110 opcodes to use direct HL and never allow
(IX,IY)+d
- SMS: fixed major logic bug in (IX,IY)+d displacement
- (was using `read(x)` instead of `operand()` for the displacement
byte fetch before)
- icarus: fake there always being 32KiB of RAM in all SMS cartridges
for the time being
- (not sure how to detect this stuff yet; although I've read it's
not even really possible `>_>`)
TODO: remove processor/z80/dissassembler.cpp code block at line 396 (as it's unnecessary.)
Lots of commercial games are starting to show trashed graphical output now.
byuu says:
Changelog:
- Makefile: added $(windres), -lpthread to Windows port
- GBA: WAITCNT.prefetch is not writable (should fix Donkey Kong: King
of Swing) \[endrift\]
- SMS: fixed hcounter shift value \[hex\_usr\]
- SMS: emulated interrupts (reset button isn't hooked up anywhere, not
sure where to put it yet)
This WIP actually took a really long time because the documentation on
SMS interrupts was all over the place. I'm hoping I've emulated them
correctly, but I honestly have no idea. It's based off my best
understanding from four or five different sources. So it's probably
quite buggy.
However, a few interrupts fire in Sonic the Hedgehog, so that's
something to start with. Now I just have to hope I've gotten some games
far enough in that I can start seeing some data in the VDP VRAM. I need
that before I can start emulating graphics mode 4 to get some actual
screen output.
Or I can just say to hell with it and use a "Hello World" test ROM.
That'd probably be smarter.
byuu says:
Changelog:
- SMS: extended bus mapping of in/out ports: now decoding them fully
inside ms/bus
- SMS: moved Z80 disassembly code from processor/z80 to ms/cpu
(cosmetic)
- SMS: hooked up non-functional silent PSG sample generation, so I can
cap the framerate at 60fps
- SMS: hooked up the VDP main loop: 684 clocks/scanline, 262
scanlines/frame (no PAL support yet)
- SMS: emulated the VDP Vcounter and Hcounter polling ... hopefully
it's right, as it's very bizarre
- SMS: emulated VDP in/out ports (data read, data write, status read,
control write, register write)
- SMS: decoding and caching all VDP register flags (variable names
will probably change)
- nall: \#undef IN on Windows port (prevent compilation warning on
processor/z80)
Watching Sonic the Hedgehog, I can definitely see some VDP register
writes going through, which is a good sign.
Probably the big thing that's needed before I can get enough into the
VDP to start showing graphics is interrupt support. And interrupts are
never fun to figure out :/
What really sucks on this front is I'm flying blind on the Z80 CPU core.
Without a working VDP, I can't run any Z80 test ROMs to look for CPU
bugs. And the CPU is certainly too buggy still to run said test ROM
anyway. I can't find any SMS emulators with trace logging from reset.
Such logs vastly accelerate tracking down CPU logic bugs, so without
them, it's going to take a lot longer.
byuu says:
Changelog:
- Z80: emulated 83 new instructions
- Z80: timing improvements
DAA is a skeleton implementation to complete the normal opcode set. Also
worth noting that I don't know exactly what the hell RETI is doing,
so for now it acts like RET. RETN probably needs some special handling
besides just setting IFF1=IFF2 as well.
I'm now missing 24 ED-prefix instructions, plus DAA, for a total of 25
opcodes remaining. And then, of course, several weeks worth of debugging
all of the inevitable bugs in the core.
byuu says:
Changelog:
- Z80: added most opcodes between 0x00 and 0x3f (two or three hard
ones missing still)
- Z80: redid register declaration *again* to handle AF', BC', DE',
HL' (ugggggh, the fuck? Alternate registers??)
- basically, using `#define <register name>` values to get around
horrendously awful naming syntax
- Z80: improved handling of displace() so that it won't ever trigger
on (BC) or (DE)
byuu says:
Changelog:
- Z80: implemented 113 new instructions (all the easy
LD/ADC/ADD/AND/OR/SBC/SUB/XOR ones)
- Z80: used alternative to castable<To, With> type (manual cast inside
instruction() register macros)
- Z80: debugger: used register macros to reduce typing and increase
readability
- Z80: debugger: smarter way of handling multiple DD/FD prefixes
(using gotos, yay!)
- ruby: fixed crash with Windows input driver on exit (from SuperMikeMan)
I have no idea how the P/V flag is supposed to work on AND/OR/XOR, so
that's probably wrong for now. HALT is also mostly a dummy function for
now. But I typically implement those inside instruction(), so it
probably won't need to be changed? We'll see.
byuu says:
Changelog:
- added (poorly-named) castable<To, With> template
- Z80 debugger rewritten to make declaring instructions much simpler
- Z80 has more instructions implemented; supports displacement on
(IX), (IY) now
- added `Processor::M68K::Bus` to mirror `Processor::Z80::Bus`
- it does add a pointer indirection; so I'm not sure if I want to
do this for all of my emulator cores ...
byuu says:
Changelog:
- rewrote the Z80 core to properly handle 0xDD (IX0 and 0xFD (IY)
prefixes
- added Processor::Z80::Bus as a new type of abstraction
- all of the instructions implemented have their proper T-cycle counts
now
- added nall/certificates for my public keys
The goal of `Processor::Z80::Bus` is to simulate the opcode fetches being
2-read + 2-wait states; operand+regular reads/writes being 3-read. For
now, this puts the cycle counts inside the CPU core. At the moment, I
can't think of any CPU core where this wouldn't be appropriate. But it's
certainly possible that such a case exists. So this may not be the
perfect solution.
The reason for having it be a subclass of Processor::Z80 instead of
virtual functions for the MasterSystem::CPU core to define is due to
naming conflicts. I wanted the core to say `in(addr)` and have it take
the four clocks. But I also wanted a version of the function that didn't
consume time when called. One way to do that would be for the core to
call `Z80::in(addr)`, which then calls the regular `in(addr)` that goes to
`MasterSystem::CPU::in(addr)`. But I don't want to put the `Z80::`
prefix on all of the opcodes. Very easy to forget it, and then end up not
consuming any time. Another is to use uglier names in the
`MasterSystem::CPU` core, like `read_`, `write_`, `in_`, `out_`, etc. But,
yuck.
So ... yeah, this is an experiment. We'll see how it goes.
byuu says:
Changelog:
- MS: added ms/bus
- Z80: implemented JP/JR/CP/DI/IM/IN instructions
- MD/VDP: added window layer emulation
- MD/controller/gamepad: fixed d2,d3 bits (Altered Beast requires
this)
The Z80 is definitely a lot nastier than the LR35902. There's a lot of
table duplication with HL→IX→IY; and two of them nest two levels deep
(eg FD CB xx xx), so the design may change as I implement more.
byuu says:
Changelog:
- 68K: MOVEQ is 8-bit signed
- 68K: disassembler was print EOR for OR instructions
- 68K: address/program-counter indexed mode had the signed-word/long
bit backward
- 68K: ADDQ/SUBQ #n,aN always works in long mode; regardless of size
- 68K→VDP DMA needs to use `mode.bit(0)<<22|dmaSource`; increment by
one instead of two
- Z80: added registers and initial two instructions
- MS: hooked up enough to load and start running games
- Sonic the Hedgehog can execute exactly one instruction... whoo.
Tim Allen