mirror of https://github.com/bsnes-emu/bsnes.git
56 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
04072b278b |
Update to v102r16 release.
byuu says:
Changelog:
- Emulator::Stream now allows adding low-pass and high-pass filters
dynamically
- also accepts a pass# count; each pass is a second-order biquad
butterworth IIR filter
- Emulator::Stream no longer automatically filters out >20KHz
frequencies for all streams
- FC: added 20Hz high-pass filter; 20KHz low-pass filter
- GB: removed simple 'magic constant' high-pass filter of unknown
cutoff frequency (missed this one in the last WIP)
- GB,SGB,GBC: added 20Hz high-pass filter; 20KHz low-pass filter
- MS,GG,MD/PSG: added 20Hz high-pass filter; 20KHz low-pass filter
- MD: added save state support (but it's completely broken for now;
sorry)
- MD/YM2612: fixed Voice#3 per-operator pitch support (fixes sound
effects in Streets of Rage, etc)
- PCE: added 20Hz high-pass filter; 20KHz low-pass filter
- WS,WSC: added 20Hz high-pass filter; 20KHz low-pass filter
So, the point of the low-pass filters is to remove frequencies above
human hearing. If we don't do this, then resampling will introduce
aliasing that results in sounds that are audible to the human ear. Which
basically an annoying buzzing sound. You'll definitely hear the
improvement from these in games like Mega Man 2 on the NES. Of course,
these already existed before, so this WIP won't sound better than
previous WIPs.
The high-pass filters are a little more complicated. Their main role is
to remove DC bias and help to center the audio stream. I don't
understand how they do this at all, but ... that's what everyone who
knows what they're talking about says, thus ... so be it.
I have set all of the high-pass filters to 20Hz, which is below the
limit of human hearing. Now this is where it gets really interesting ...
technically, some of these systems actually cut off a lot of range. For
instance, the GBA should technically use an 800Hz high-pass filter when
output is done through the system's speakers. But of course, if you plug
in headphones, you can hear the lower frequencies.
Now 800Hz ... you definitely can hear. At that level, nearly all of the
bass is stripped out and the audio is very tinny. Just like the real
system. But for now, I don't want to emulate the audio being crushed
that badly.
I'm sticking with 20Hz everywhere since it won't negatively affect audio
quality. In fact, you should not be able to hear any difference between
this WIP and the previous WIP. But theoretically, DC bias should mostly
be removed as a result of these new filters. It may be that we need to
raise the values on some cores in the future, but I don't want to do
that until we know for certain that we have to.
What I can say is that compared to even older WIPs than r15 ... the
removal of the simple one-pole low-pass and high-pass filters with the
newer three-pass, second-order filters should result in much better
attenuation (less distortion of audible frequencies.) Probably not
enough to be noticeable in a blind test, though.
|
|
|
Tim Allen
|
7e7003fd29 |
Update to v102r15 release.
byuu says:
Changelog:
- nall: added DSP::IIR::OnePole (which is a first-order IIR filter)
- FC/APU: removed strong highpass, weak hipass filters (and the
dummied out lowpass filter)
- MS,GG,MD/PSG: removed lowpass filter
- MS,GG,MD/PSG: audio was not being centered properly; removed
centering for now
- MD/YM2612: fixed clipping of accumulator from 18 signed bits to 14
signed bits (-0x2000 to +0x1fff) [Cydrak]
- MD/YM2612: removed lowpass filter
- PCE/PSG: audio was not being centered properly; removed centering
for now
First thing is that I've removed all of the ad-hoc audio filtering.
Emulator::Stream intrinsically provides a three-pass, second-order
biquad IIR butterworth lowpass filter that clips frequencies above 20KHz
with very good attenuation (as good as IIR gets, anyway.)
It doesn't really make sense to have the various cores running
additional lowpass filters. If we want to filter frequencies below
20KHz, then I can adapt Emulator::Audio::createStream() to take a cutoff
frequency value, and we can do it all at once, with much better quality.
Right now, I don't know what frequencies are best to cut off the various
other audio cores, so they're just gone for now.
As for the highpass filters for the Famicom core, well ... you don't get
aliasing from resampling low frequencies. And generally speaking, too
low a frequency will be inaudible anyway. All these were doing was
killing possible bass (if they were too strong.) We can add them again,
but only if someone can convert Ryphecha's ad-hoc magic integers into a
frequency cutoff. In which case, I'll use my biquad IIR filter to do it
even better. On this note, it may prove useful to do this for the MD PSG
as well, to try and head off unnecessary clamping when mixing with the
YM2612.
Finally, there was the audio centering issue that affected the
MS,GG,MD,PCE,SG cores. It was flooring the "silent" audio level, which
was resulting in extremely heavy distortion if you tried listening to
higan and, say, audacious at the same time. Without the botched
centering, this distortion is completely gone now.
However, without any centering, we've halved the potential volume range.
This means the audio slider in higan's audio settings panel will start
clamping twice as quickly. So ultimately, we need to figure out how to
fix the centering. This isn't as simple as just subtracting less. We
will probably have to center every individual audio channel before
summing them to do this properly.
Results:
On the Mega Drive, Altered Beast sounds quite a bit better, a lot less
distortion now. But it's still not perfect, especially sound effects.
Further, Bare Knuckle / Streets of Rage still has really bad sound
effects. It looks like I broke something in Cydrak's code when trying to
adapt it to my style =(
|
|
|
Tim Allen
|
0bf2c9d4e1 |
Update to v102r13 release.
byuu says:
Changelog:
- removed Emulator::Interface::videoFrequency(), audioFrequency()¹
- (MS,GG,MD)/PSG: removed inversion on noise channel LFSR update
[mic_]
- MD/PSG: lowered volume to match YM2612 volume
- MD/YM2612: added Cydrak's emulation of FM channels and LFO²
¹: These were no longer used by the UI. The video frequency is
adaptive on many systems. And the audio frequency is meaningless due to
Emulator::Audio always outputting a consistent frequency specified by
the UI. Plus, take the Genesis where there's two sound chips running at
different frequencies. So, these had to go.
²: Due to some lurking bugs, the audio is completely broken
unfortunately. Will need to be debugged :(
First pass looking for any typos didn't yield any obvious results.
|
|
|
Tim Allen
|
68f04c3bb8 |
Update to v102r10 release.
byuu says: Changelog: - removed Emulator::Interface::Capabilities¹ - MS: improved the PSG emulation a bit - MS: added cheat code support - MS: added save state support² - MD: emulated the PSG³ ¹: there's really no point to it anymore. I intend to add cheat codes to the GBA core, as well as both cheat codes and save states to the Mega Drive core. I no longer intend to emulate any new systems, so these values will always be true. Further, the GUI doesn't respond to these values to disable those features anymore ever since the hiro rewrite, so they're double useless. ²: right now, the Z80 core is using a pointer for HL-\>(IX,IY) overrides. But I can't reliably serialize pointers, so I need to convert the Z80 core to use an integer here. The save states still appear to work fine, but there's the potential for an instruction to execute incorrectly if you're incredibly unlucky, so this needs to be fixed as soon as possible. Further, I still need a way to serialize array<T, Size> objects, and I should also add nall::Boolean serialization support. ³: I don't have a system in place to share identical sound chips. But this chip is so incredibly simple that it's not really much trouble to duplicate it. Further, I can strip out the stereo sound support code from the Game Gear portion, so it's even tinier. Note that the Mega Drive only just barely uses the PSG. Not at all in Altered Beast, and only for a tiny part of the BGM music on Sonic 1, plus his jump sound effect. |
|
|
Tim Allen
|
fa6cbac251 |
Update to v102r06 release.
byuu says:
Changelog:
- added higan/emulator/platform.hpp (moved out Emulator::Platform from
emulator/interface.hpp)
- moved gmake build paramter to nall/GNUmakefile; both higan and
icarus use it now
- added build=profile mode
- MD: added the region select I/O register
- MD: started to add region selection support internally (still no
external select or PAL support)
- PCE: added cycle stealing when reading/writing to the VDC or VCE;
and when using ST# instructions
- PCE: cleaned up PSG to match the behavior of Mednafen (doesn't
improve sound at all ;_;)
- note: need to remove loadWaveSample, loadWavePeriod
- HuC6280: ADC/SBC decimal mode consumes an extra cycle; does not set
V flag
- HuC6280: block transfer instructions were taking one cycle too many
- icarus: added code to strip out PC Engine ROM headers
- hiro: added options support to BrowserDialog
The last one sure ended in failure. The plan was to put a region
dropdown directly onto hiro::BrowserDialog, and I had all the code for
it working. But I forgot one important detail: the system loads
cartridges AFTER powering on, so even though I could technically change
the system region post-boot, I'd rather not do so.
So that means we have to know what region we want before we even select
a game. Shit.
|
|
|
Tim Allen
|
bdc100e123 |
Update to v102r02 release.
byuu says:
Changelog:
- I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it
- if it's really invalid C++, then GCC needs to stop accepting it
in strict `-std=c++14` mode
- Emulator::Interface::Information::resettable is gone
- Emulator::Interface::reset() is gone
- FC, SFC, MD cores updated to remove soft reset behavior
- split GameBoy::Interface into GameBoyInterface,
GameBoyColorInterface
- split WonderSwan::Interface into WonderSwanInterface,
WonderSwanColorInterface
- PCE: fixed off-by-one scanline error [hex_usr]
- PCE: temporary hack to prevent crashing when VDS is set to < 2
- hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#)
types to (u)int_(#)t types
- icarus: replaced usage of unique with strip instead (so we don't
mess up frameworks on macOS)
- libco: added macOS-specific section marker [Ryphecha]
So ... the major news this time is the removal of the soft reset
behavior. This is a major!! change that results in a 100KiB diff file,
and it's very prone to accidental mistakes!! If anyone is up for
testing, or even better -- looking over the code changes between v102r01
and v102r02 and looking for any issues, please do so. Ideally we'll want
to test every NES mapper type and every SNES coprocessor type by loading
said games and power cycling to make sure the games are all cleanly
resetting. It's too big of a change for me to cover there not being any
issues on my own, but this is truly critical code, so yeah ... please
help if you can.
We technically lose a bit of hardware documentation here. The soft reset
events do all kinds of interesting things in all kinds of different
chips -- or at least they do on the SNES. This is obviously not ideal.
But in the process of removing these portions of code, I found a few
mistakes I had made previously. It simplifies resetting the system state
a lot when not trying to have all the power() functions call the reset()
functions to share partial functionality.
In the future, the goal will be to come up with a way to add back in the
soft reset behavior via keyboard binding as with the Master System core.
What's going to have to happen is that the key binding will have to send
a "reset pulse" to every emulated chip, and those chips are going to
have to act independently to power() instead of reusing functionality.
We'll get there eventually, but there's many things of vastly greater
importance to work on right now, so it'll be a while. The information
isn't lost ... we'll just have to pull it out of v102 when we are ready.
Note that I left the SNES reset vector simulation code in, even though
it's not possible to trigger, for the time being.
Also ... the Super Game Boy core is still disconnected. To be honest, it
totally slipped my mind when I released v102 that it wasn't connected
again yet. This one's going to be pretty tricky to be honest. I'm
thinking about making a third GameBoy::Interface class just for SGB, and
coming up with some way of bypassing platform-> calls when in this
mode.
|
|
|
Tim Allen
|
bf90bdfcc8 |
Update to v101r31 release.
byuu says:
Changelog:
- converted Emulator::Interface::Bind to Emulator::Platform
- temporarily disabled SGB hooks
- SMS: emulated Game Gear palette (latching word-write behavior not
implemented yet)
- SMS: emulated Master System 'Reset' button, Game Gear 'Start' button
- SMS: removed reset() functionality, driven by the mappable input now
instead
- SMS: split interface class in two: one for Master System, one for
Game Gear
- SMS: emulated Game Gear video cropping to 160x144
- PCE: started on HuC6280 CPU core—so far only registers, NOP
instruction has been implemented
Errata:
- Super Game Boy support is broken and thus disabled
- if you switch between Master System and Game Gear without
restarting, bad things happen:
- SMS→GG, no video output on the GG
- GG→SMS, no input on the SMS
I'm not sure what's causing the SMS\<-\>GG switch bug, having a hard
time debugging it. Help would be very much appreciated, if anyone's up
for it. Otherwise I'll keep trying to track it down on my end.
|
|
|
Tim Allen
|
f3e67da937 |
Update to v101r19 release.
byuu says:
Changelog:
- added \~130 new PAL games to icarus (courtesy of Smarthuman
and aquaman)
- added all three Korean-localized games to icarus
- sfc: removed SuperDisc emulation (it was going nowhere)
- sfc: fixed MSU1 regression where the play/repeat flags were not
being cleared on track select
- nall: cryptography support added; will be used to sign future
databases (validation will always be optional)
- minor shims to fix compilation issues due to nall changes
The real magic is that we now have 25-30% of the PAL SNES library in
icarus!
Signing will be tricky. Obviously if I put the public key inside the
higan archive, then all anyone has to do is change that public key for
their own releases. And if you download from my site (which is now over
HTTPS), then you don't need the signing to verify integrity. I may just
put the public key on my site on my site and leave it at that, we'll
see.
|
|
|
Tim Allen
|
427bac3011 |
Update to v101r06 release.
byuu says:
I reworked the video sizing code. Ended up wasting five fucking hours
fighting GTK. When you call `gtk_widget_set_size_request`, it doesn't
actually happen then. This is kind of a big deal because when I then go
to draw onto the viewport, the actual viewport child window is still the
old size, so the image gets distorted. It recovers in a frame or so with
emulation, but if we were to put a still image on there, it would stay
distorted.
The first thought is, `while(gtk_events_pending())
gtk_main_iteration_do(false);` right after the `set_size_request`. But
nope, it tells you there's no events pending. So then you think, go
deeper, use `XPending()` instead. Same thing, GTK hasn't actually issued
the command to Xlib yet. So then you think, if the widget is realized,
just call a blocking `gtk_main_iteration`. One call does nothing, two
calls results in a deadlock on the second one ... do it before program
startup, and the main window will never appear. Great.
Oh, and it's not just the viewport. It's also the widget container area
of the windows, as well as the window itself, as well as the fullscreen
mode toggle effect. They all do this.
For the latter three, I couldn't find anything that worked, so I just
added 20ms loops of constantly calling `gtk_main_iteration_do(false)`
after each one of those things. The downside here is toggling the status
bar takes 40ms, so you'll see it and it'll feel a tiny bit sluggish.
But I can't have a 20ms wait on each widget resize, that would be
catastrophic to performance on windows with lots of widgets.
I tried hooking configure-event and size-allocate, but they were very
unreliable. So instead I ended up with a loop that waits up to a maximm
of 20ms that inspects the `widget->allocation.(width,height)` values
directly and waits for them to be what we asked for with
`set_size_request`.
There was some extreme ugliness in GTK with calling
`gtk_main_iteration_do` recursively (`hiro::Widget::setGeometry` is
called recursively), so I had to lock it to only happen on the top level
widgets (the child ones should get resized while waiting on the
top-level ones, so it should be fine in practice), and also only run it
on realized widgets.
Even still, I'm getting ~3 timeouts when opening the settings dialog in
higan, but no other windows. But, this is the best I can do for now.
And the reason for all of this pain? Yeah, updated the video code.
So the Emulator::Interface now has this:
struct VideoSize { uint width, height; }; //or requiem for a tuple
auto videoSize() -> VideoSize;
auto videoSize(uint width, uint height, bool arc) -> VideoSize;
The first function, for now, is just returning the literal surface size.
I may remove this ... one thing I want to allow for is cores that send
different texture sizes based on interlace/hires/overscan/etc settings.
The second function is more interesting. Instead of having the UI trying
to figure out sizing, I figure the emulation cores can do a better job
and we can customize it per-core now. So it gets the window's width and
height, and whether the user asked for aspect correction, and then
computes the best width/height ratio possible. For now they're all just
doing multiples of a 1x scale to the UI 2x,3x,4x modes.
We still need a third function, which will probably be what I repurpose
videoSize() for: to return the 'effective' size for pixel shaders, to
then feed into ruby, to then feed into quark, to then feed into our
shaders. Since shaders use normalized coordinates for pixel fetching,
this should work out just fine. The real texture size will be exposed to
quark shaders as well, of course.
Now for the main window ... it's just hard-coded to be 640x480, 960x720,
1280x960 for now. It works nicely for some cores on some modes, not so
much for others. Work in progress I guess.
I also took the opportunity to draw the about dialog box logo on the
main window. Got a bit fancy and used the old spherical gradient and
impose functionality of nall/image on it. Very minor highlight, nothing
garish. Just something nicer than a solid black window.
If you guys want to mess around with sizes, placements, and gradient
styles/colors/shapes ... feel free. If you come up with something nicer,
do share.
That's what led to all the GTK hell ... the logo wasn't drawing right as
you resized the window. But now it is, though I am not at all happy with
the hacking I had to do.
I also had to improve the video update code as a result of this:
- when you unload a game, it blacks out the screen
- if you are not quitting the emulator, it'll draw the logo; if
you are, it won't
- when you load a game, it black out the logo
These options prevent any unsightliness from resizing the viewport with
image data on it already
I need to redraw the logo when toggling fullscreen with no game loaded
as well for Windows, it seems.
|
|
|
Tim Allen
|
c50723ef61 |
Update to v100r15 release.
byuu wrote: Aforementioned scheduler changes added. Longer explanation of why here: http://hastebin.com/raw/toxedenece Again, we really need to test this as thoroughly as possible for regressions :/ This is a really major change that affects absolutely everything: all emulation cores, all coprocessors, etc. Also added ADDX and SUB to the 68K core, which brings us just barely above 50% of the instruction encoding space completed. [Editor's note: The "aformentioned scheduler changes" were described in a previous forum post: Unfortunately, 64-bits just wasn't enough precision (we were getting misalignments ~230 times a second on 21/24MHz clocks), so I had to move to 128-bit counters. This of course doesn't exist on 32-bit architectures (and probably not on all 64-bit ones either), so for now ... higan's only going to compile on 64-bit machines until we figure something out. Maybe we offer a "lower precision" fallback for machines that lack uint128_t or something. Using the booth algorithm would be way too slow. Anyway, the precision is now 2^-96, which is roughly 10^-29. That puts us far beyond the yoctosecond. Suck it, MAME :P I'm jokingly referring to it as the byuusecond. The other 32-bits of precision allows a 1Hz clock to run up to one full second before all clocks need to be normalized to prevent overflow. I fixed a serious wobbling issue where I was using clock > other.clock for synchronization instead of clock >= other.clock; and also another aliasing issue when two threads share a common frequency, but don't run in lock-step. The latter I don't even fully understand, but I did observe it in testing. nall/serialization.hpp has been extended to support 128-bit integers, but without explicitly naming them (yay generic code), so nall will still compile on 32-bit platforms for all other applications. Speed is basically a wash now. FC's a bit slower, SFC's a bit faster. The "longer explanation" in the linked hastebin is: Okay, so the idea is that we can have an arbitrary number of oscillators. Take the SNES: - CPU/PPU clock = 21477272.727272hz - SMP/DSP clock = 24576000hz - Cartridge DSP1 clock = 8000000hz - Cartridge MSU1 clock = 44100hz - Controller Port 1 modem controller clock = 57600hz - Controller Port 2 barcode battler clock = 115200hz - Expansion Port exercise bike clock = 192000hz Is this a pathological case? Of course it is, but it's possible. The first four do exist in the wild already: see Rockman X2 MSU1 patch. Manifest files with higan let you specify any frequency you want for any component. The old trick higan used was to hold an int64 counter for each thread:thread synchronization, and adjust it like so: - if thread A steps X clocks; then clock += X * threadB.frequency - if clock >= 0; switch to threadB - if thread B steps X clocks; then clock -= X * threadA.frequency - if clock < 0; switch to threadA But there are also system configurations where one processor has to synchronize with more than one other processor. Take the Genesis: - the 68K has to sync with the Z80 and PSG and YM2612 and VDP - the Z80 has to sync with the 68K and PSG and YM2612 - the PSG has to sync with the 68K and Z80 and YM2612 Now I could do this by having an int64 clock value for every association. But these clock values would have to be outside the individual Thread class objects, and we would have to update every relationship's clock value. So the 68K would have to update the Z80, PSG, YM2612 and VDP clocks. That's four expensive 64-bit multiply-adds per clock step event instead of one. As such, we have to account for both possibilities. The only way to do this is with a single time base. We do this like so: - setup: scalar = timeBase / frequency - step: clock += scalar * clocks Once per second, we look at every thread, find the smallest clock value. Then subtract that value from all threads. This prevents the clock counters from overflowing. Unfortunately, these oscillator values are psychotic, unpredictable, and often times repeating fractions. Even with a timeBase of 1,000,000,000,000,000,000 (one attosecond); we get rounding errors every ~16,300 synchronizations. Specifically, this happens with a CPU running at 21477273hz (rounded) and SMP running at 24576000hz. That may be good enough for most emulators, but ... you know how I am. Plus, even at the attosecond level, we're really pushing against the limits of 64-bit integers. Given the reciprocal inverse, a frequency of 1Hz (which does exist in higan!) would have a scalar that consumes 1/18th of the entire range of a uint64 on every single step. Yes, I could raise the frequency, and then step by that amount, I know. But I don't want to have weird gotchas like that in the scheduler core. Until I increase the accuracy to about 100 times greater than a yoctosecond, the rounding errors are too great. And since the only choice above 64-bit values is 128-bit values; we might as well use all the extra headroom. 2^-96 as a timebase gives me the ability to have both a 1Hz and 4GHz clock; and run them both for a full second; before an overflow event would occur. Another hastebin includes demonstration code: #include <libco/libco.h> #include <nall/nall.hpp> using namespace nall; // cothread_t mainThread = nullptr; const uint iterations = 100'000'000; const uint cpuFreq = 21477272.727272 + 0.5; const uint smpFreq = 24576000.000000 + 0.5; const uint cpuStep = 4; const uint smpStep = 5; // struct ThreadA { cothread_t handle = nullptr; uint64 frequency = 0; int64 clock = 0; auto create(auto (*entrypoint)() -> void, uint frequency) { this->handle = co_create(65536, entrypoint); this->frequency = frequency; this->clock = 0; } }; struct CPUA : ThreadA { static auto Enter() -> void; auto main() -> void; CPUA() { create(&CPUA::Enter, cpuFreq); } } cpuA; struct SMPA : ThreadA { static auto Enter() -> void; auto main() -> void; SMPA() { create(&SMPA::Enter, smpFreq); } } smpA; uint8 queueA[iterations]; uint offsetA; cothread_t resumeA = cpuA.handle; auto EnterA() -> void { offsetA = 0; co_switch(resumeA); } auto QueueA(uint value) -> void { queueA[offsetA++] = value; if(offsetA >= iterations) { resumeA = co_active(); co_switch(mainThread); } } auto CPUA::Enter() -> void { while(true) cpuA.main(); } auto CPUA::main() -> void { QueueA(1); smpA.clock -= cpuStep * smpA.frequency; if(smpA.clock < 0) co_switch(smpA.handle); } auto SMPA::Enter() -> void { while(true) smpA.main(); } auto SMPA::main() -> void { QueueA(2); smpA.clock += smpStep * cpuA.frequency; if(smpA.clock >= 0) co_switch(cpuA.handle); } // struct ThreadB { cothread_t handle = nullptr; uint128_t scalar = 0; uint128_t clock = 0; auto print128(uint128_t value) { string s; while(value) { s.append((char)('0' + value % 10)); value /= 10; } s.reverse(); print(s, "\n"); } //femtosecond (10^15) = 16306 //attosecond (10^18) = 688838 //zeptosecond (10^21) = 13712691 //yoctosecond (10^24) = 13712691 (hitting a dead-end on a rounding error causing a wobble) //byuusecond? ( 2^96) = (perfect? 79,228 times more precise than a yoctosecond) auto create(auto (*entrypoint)() -> void, uint128_t frequency) { this->handle = co_create(65536, entrypoint); uint128_t unitOfTime = 1; //for(uint n : range(29)) unitOfTime *= 10; unitOfTime <<= 96; //2^96 time units ... this->scalar = unitOfTime / frequency; print128(this->scalar); this->clock = 0; } auto step(uint128_t clocks) -> void { clock += clocks * scalar; } auto synchronize(ThreadB& thread) -> void { if(clock >= thread.clock) co_switch(thread.handle); } }; struct CPUB : ThreadB { static auto Enter() -> void; auto main() -> void; CPUB() { create(&CPUB::Enter, cpuFreq); } } cpuB; struct SMPB : ThreadB { static auto Enter() -> void; auto main() -> void; SMPB() { create(&SMPB::Enter, smpFreq); clock = 1; } } smpB; auto correct() -> void { auto minimum = min(cpuB.clock, smpB.clock); cpuB.clock -= minimum; smpB.clock -= minimum; } uint8 queueB[iterations]; uint offsetB; cothread_t resumeB = cpuB.handle; auto EnterB() -> void { correct(); offsetB = 0; co_switch(resumeB); } auto QueueB(uint value) -> void { queueB[offsetB++] = value; if(offsetB >= iterations) { resumeB = co_active(); co_switch(mainThread); } } auto CPUB::Enter() -> void { while(true) cpuB.main(); } auto CPUB::main() -> void { QueueB(1); step(cpuStep); synchronize(smpB); } auto SMPB::Enter() -> void { while(true) smpB.main(); } auto SMPB::main() -> void { QueueB(2); step(smpStep); synchronize(cpuB); } // #include <nall/main.hpp> auto nall::main(string_vector) -> void { mainThread = co_active(); uint masterCounter = 0; while(true) { print(masterCounter++, " ...\n"); auto A = clock(); EnterA(); auto B = clock(); print((double)(B - A) / CLOCKS_PER_SEC, "s\n"); auto C = clock(); EnterB(); auto D = clock(); print((double)(D - C) / CLOCKS_PER_SEC, "s\n"); for(uint n : range(iterations)) { if(queueA[n] != queueB[n]) return print("fail at ", n, "\n"); } } } ...and that's everything.] |
|
|
Tim Allen
|
ca277cd5e8 |
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
|
|
|
Tim Allen
|
76a8ecd32a |
Update to v100r03 release.
byuu says: Changelog: - moved Thread, Scheduler, Cheat functionality into emulator/ for all cores - start of actual Mega Drive emulation (two 68K instructions) I'm going to be rather terse on MD emulation, as it's too early for any meaningful dialogue here. |
|
|
Tim Allen
|
8d5cc0c35e |
Update to v099r15 release.
byuu says:
Changelog:
- nall::lstring -> nall::string_vector
- added IntegerBitField<type, lo, hi> -- hopefully it works correctly...
- Multitap 1-4 -> Super Multitap 2-5
- fixed SFC PPU CGRAM read regression
- huge amounts of SFC PPU IO register cleanups -- .bits really is lovely
- re-added the read/write(VRAM,OAM,CGRAM) helpers for the SFC PPU
- but they're now optimized to the realities of the PPU (16-bit data
sizes / no address parameter / where appropriate)
- basically used to get the active-display overrides in a unified place;
but also reduces duplicate code in (read,write)IO
|
|
|
Tim Allen
|
82293c95ae |
Update to v099r14 release.
byuu says:
Changelog:
- (u)int(max,ptr) abbreviations removed; use _t suffix now [didn't feel
like they were contributing enough to be worth it]
- cleaned up nall::integer,natural,real functionality
- toInteger, toNatural, toReal for parsing strings to numbers
- fromInteger, fromNatural, fromReal for creating strings from numbers
- (string,Markup::Node,SQL-based-classes)::(integer,natural,real)
left unchanged
- template<typename T> numeral(T value, long padding, char padchar)
-> string for print() formatting
- deduces integer,natural,real based on T ... cast the value if you
want to override
- there still exists binary,octal,hex,pointer for explicit print()
formatting
- lstring -> string_vector [but using lstring = string_vector; is
declared]
- would be nice to remove the using lstring eventually ... but that'd
probably require 10,000 lines of changes >_>
- format -> string_format [no using here; format was too ambiguous]
- using integer = Integer<sizeof(int)*8>; and using natural =
Natural<sizeof(uint)*8>; declared
- for consistency with boolean. These three are meant for creating
zero-initialized values implicitly (various uses)
- R65816::io() -> idle() and SPC700::io() -> idle() [more clear; frees
up struct IO {} io; naming]
- SFC CPU, PPU, SMP use struct IO {} io; over struct (Status,Registers) {}
(status,registers); now
- still some CPU::Status status values ... they didn't really fit into
IO functionality ... will have to think about this more
- SFC CPU, PPU, SMP now use step() exclusively instead of addClocks()
calling into step()
- SFC CPU joypad1_bits, joypad2_bits were unused; killed them
- SFC PPU CGRAM moved into PPU::Screen; since nothing else uses it
- SFC PPU OAM moved into PPU::Object; since nothing else uses it
- the raw uint8[544] array is gone. OAM::read() constructs values from
the OAM::Object[512] table now
- this avoids having to determine how we want to sub-divide the two
OAM memory sections
- this also eliminates the OAM::synchronize() functionality
- probably more I'm forgetting
The FPS fluctuations are driving me insane. This WIP went from 128fps to
137fps. Settled on 133.5fps for the final build. But nothing I changed
should have affected performance at all. This level of fluctuation makes
it damn near impossible to know whether I'm speeding things up or slowing
things down with changes.
|
|
|
Tim Allen
|
67457fade4 |
Update to v099r13 release.
byuu says: Changelog: - GB core code cleanup completed - GBA core code cleanup completed - some more cleanup on missed processor/arm functions/variables - fixed FC loading icarus bug - "Load ROM File" icarus functionality restored - minor code unification efforts all around (not perfect yet) - MMIO->IO - mmio.cpp->io.cpp - read,write->readIO,writeIO It's been a very long work in progress ... starting all the way back with v094r09, but the major part of the higan code cleanup is now completed! Of course, it's very important to note that this is only for the basic style: - under_score functions and variables are now camelCase - return-type function-name() are now auto function-name() -> return-type - Natural<T>/Integer<T> replace (u)intT_n types where possible - signed/unsigned are now int/uint - most of the x==true,x==false tests changed to x,!x A lot of spot improvements to consistency, simplicity and quality have gone in along the way, of course. But we'll probably never fully finishing beautifying every last line of code in the entire codebase. Still, this is a really great start. Going forward, WIP diffs should start being smaller and of higher quality once again. I know the joke is, "until my coding style changes again", but ... this was way too stressful, way too time consuming, and way too risky. I'm too old and tired now for extreme upheavel like this again. The only major change I'm slowly mulling over would be renaming the using Natural<T>/Integer<T> = (u)intT; shorthand to something that isn't as easily confused with the (u)int_t types ... but we'll see. I'll definitely continue to change small things all the time, but for the larger picture, I need to just accept the style I have and live with it. |
|
|
Tim Allen
|
7a68059f78 |
Update to v099r12 release.
byuu says: Changelog: - fixed FC AxROM / VRC7 regression - BitField split to BooleanBitField/NaturalBitField (in preparation for IntegerBitField) - BitFieldReference removed - GB CPU cleaned up - GB Cartridge + Mappers cleaned up - SFC CGRAM is now emulated as uint15[256] instead of uint[512] - sfc/ppu/memory.cpp no longer needed; removed - purged SFC Debugger hooks for now (some of the operator[] calls were bypassing them anyway) Unfortunately, for reasons that defy all semblance of logic, the CGRAM change caused a slight speed hit. As have the last few changes. We're now down to around 129.5fps compared to 123.fps for v099 and 134.5fps at our peak (v099r01-r02). I really like the style I came up with for the Game Boy mappers to settle the purpose(ROM,RAM) vs (rom,ram)Purpose naming convention. If I ever get around to redoing the NES mappers, that's likely the approach I'll take. |
|
|
Tim Allen
|
3e807946b8 |
Update to v099r11 release.
byuu says: Changelog: - NES PPU core updated to use BitFields (absolutely massive improvement in code readability) - NES APU core updated to new coding style - NES cartridge/board and cartridge/chip updated to new coding style - pushed NES PPU rendering one dot forward (doesn't fix King's Quest V yet, sadly) - fixed SNES PPU BG tilemask for 128KiB VRAM mode (doesn't fix Yoshi's Island, though) So ... I kind of went overboard with the fc/cartridge changes. This WIP diff is 185KiB >_> I didn't realize it was going to be as big a task as it was, but once I started everything broke in a chain reaction, so I had to do it all at once. There's a massive chance we've broken a bunch of NES things. Any typos in this WIP are going to be absolutely insidious to track down =( But ... supposing I pulled it off, this means the Famicom core is now fully converted to the new coding style as well. That leaves only the GB and GBA cores. Once those are finished, then we'll finally be free of these gigantic hellspawn diffs. |
|
|
Tim Allen
|
a816998122 |
Update to v099r10 release.
byuu says:
Changelog:
- higan/profile/ => higan/systems/ [temporary; unless we can't think of
a better base folder name]
- god-damn-better-have fixed the input polling bug
- re-added command-line and drag-and-drop loading
- command-line loading can now load multiple folders at once (SGB+GB
game; Sufami Turbo+Slot A+Slot B; etc)
- if you load just the base cart, it'll present you with a dialog to
optionally load slotted cart(s)
- MSU1 now goes through nall/vfs instead of directly accessing the
filesystem
- Famicom Cartridge, PPU cores updated to newer programming style
- there's countless opportunity for BitField and .bits() in the PPU
... but I'm worried about breaking things
If anyone has a working MSU1 game and can test the changes out, that'd
be appreciated. I still don't have a test ROM on my dev box.
I wouldn't worry too much about extensively testing the Famicom PPU
changes just yet ... I'm still struggling with what to name the structs
inside the classes between all of my emulators, and the BitField/.bits()
changes will be much more important to test at a later date.
The only use case left for Emulator::Interface::path(uint id) is for
21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen,
which do not have any official ways to open a file in RAM. I'm
very hesitant to use the portable trick of writing the memory to a
temporary file, loading it, and deleting the temporary file once done
... it's a real waste of disk activity. I might make something like
vfs::file::isVirtual->bool,path()->string to get around this. But even
once I do, the underlying LoadLibrary/dlopen call is still going to be
direct disk access.
|
|
|
Tim Allen
|
3a9c7c6843 |
Update to v099r09 release.
byuu says:
Changelog:
- Emulator::Interface::Medium::bootable removed
- Emulator::Interface::load(bool required) argument removed
[File::Required makes no sense on a folder]
- Super Famicom.sys now has user-configurable properties (CPU,PPU1,PPU2
version; PPU1 VRAM size, Region override)
- old nall/property removed completely
- volatile flags supported on coprocessor RAM files now (still not in
icarus, though)
- (hopefully) fixed SNES Multitap support (needs testing)
- fixed an OAM tiledata range clipping limit in 128KiB VRAM mode (doesn't
fix Yoshi's Island, sadly)
- (hopefully, again) fixed the input polling bug hex_usr reported
- re-added dialog box for when File::Required files are missing
- really cool: if you're missing a boot ROM, BIOS ROM, or IPL ROM,
it warns you immediately
- you don't have to select a game before seeing the error message
anymore
- fixed cheats.bml load/save location
|
|
|
Tim Allen
|
f48b332c83 |
Update to v099r08 release.
byuu says:
Changelog:
- nall/vfs work 100% completed; even SGB games load now
- emulation cores now call load() for the base cartridges as well
- updated port/device handling; portmask is gone; device ID bug should
be resolved now
- SNES controller port 1 multitap option was removed
- added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp
VRAM::size=0x10000; to enable)
Overall, nall/vfs was a huge success!! We've substantially reduced
the amount of boilerplate code everywhere, while still allowing (even
easier than before) support for RAM-based game loading/saving. All of
nall/stream is dead and buried.
I am considering removing Emulator::Interface::Medium::id and/or
bootable flag. Or at least, doing something different with it. The
values for the non-bootable GB/BS/ST entries duplicate the ID that is
supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use
this as the hardware revision selection ID, and then gut non-bootable
options. There's really no reason for that to be there. I think at one
point I was using it to generate library tabs for non-bootable systems,
but we don't do that anymore anyway.
Emulator::Interface::load() may not need the required flag anymore ... it
doesn't really do anything right now anyway.
I have a few reasons for having the cores load the base cartridge. Most
importantly, it is going to enable a special mode for the WonderSwan /
WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's
possible to boot these systems with no games inserted to set user profile
information and such. There are also other systems that may accept being
booted without a cartridge. To reach this state, you would load a game and
then cancel the load dialog. Right now, this results in games not loading.
The second reason is this prevents nasty crashes when loading fails. So
if you're missing a required manifest, the emulator won't die a violent
death anymore. It's able to back out at any point.
The third reason is consistency: loading the base cartridge works the
same as the slot cartridges.
The fourth reason is Emulator::Interface::open(uint pathID)
values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This
complicated things because you had to pass the correct ID. But now
instead, Emulator::Interface::load() returns maybe<uint> that is nothing
when no game is selected, and a pathID for a valid game. And now open()
can take this ID to access this game's folder contents.
The downside, which is temporary, is that command-line loading is
currently broken. But I do intend on restoring it. In fact, I want to do
better than before and allow multi-cart booting from the command-line by
specifying the base cartridge and then slot cartridges. The idea should
be pretty simple: keep a queue of pending filenames that we fill from
the command-line and/or drag-and-drop operations on the main window,
and then empty out the queue or prompt for load dialogs from the UI
when booting a system. This also might be a bit more unorthodox compared
to the traditional emulator design of "loadGame(filename)", but ... oh
well. It's easy enough still.
The port/device changes are fun. We simplified things quite a bit. The
portmask stuff is gone entirely. While ports and devices keep IDs,
this is really just sugar-coating so UIs can use for(auto& port :
emulator->ports) and access port.id; rather than having to use for(auto
n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... };
but they should otherwise generally be identical to the order they appear
in their respective ranges. Still, don't rely on that.
Input::id is gone. There was no point since we also got rid of the nasty
Input::order vector. Since I was in here, I went ahead and caved on the
pedantics and renamed Input::guid to Input::userData.
I removed the SNES controller port 1 multitap option. Basically, the only
game that uses this is N-warp Daisakusen and, no offense to d4s, it's
not really a good game anyway. It's just a quick demo to show 8-players
on the SNES. But in the UI, all it does is confuse people into wasting
time mapping a controller they're never going to use, and they're going
to wonder which port to use. If more compelling use cases for 8-players
comes about, we can reconsider this. I left all the code to support this
in place, so all you have to do is uncomment one line to enable it again.
We now have dsnes emulation! :D
If you change PPU::VRAM::size to 0x10000 (words), then you should now
have 128KiB of VRAM. Even better, it serializes the used-VRAM size,
so your save states shouldn't crash on you if you swap between the two
(though if you try this, you're nuts.)
Note that this option does break commercial software. Yoshi's Island in
particular. This game is setting A15 on some PPU register writes, but
not on others. The end result of this is things break horribly in-game.
Also, this option is causing a very tiny speed hit for obvious reasons
with the variable masking value (I'm even using size-1 for now.) Given
how niche this is, I may just leave it a compile-time constant to avoid
the overhead cost. Otherwise, if we keep the option, then it'll go into
Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future.
----
Finally, some fun for my OCD ... my monitor suddenly cut out on me
in the middle of working on this WIP, about six hours in of non-stop
work. Had to hit a bunch of ctrl+alt+fN commands (among other things)
and trying to log in headless on another TTY to do issue commands,
trying to recover the display. Finally power cycled the monitor and it
came back up. So all my typing ended up going to who knows where.
Usually this sort of thing terrifies me enough that I scrap a WIP and
start over to ensure I didn't screw anything up during the crashed screen
when hitting keys randomly.
Obviously, everything compiles and appears to work fine. And I know
it's extremely paranoid, but OCD isn't logical, so ... I'm going
to go over every line of the 100KiB r07->r08 diff looking for any
corruption/errors/whatever.
----
Review finished.
r08 diff review notes:
- fc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- gb/cartridge/cartridge.hpp:
remove redundant uint _pathID; (in Information::pathID already)
- gb/cartridge/cartridge.hpp:
pull sha256 inside Information
- sfc/cartridge/load/cpp:
add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more
descriptive
- sfc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- sfc/interface/interface.cpp:
remove n variable from the Multitap device input generation loop
(now unused)
- sfc/interface/interface.hpp:
put struct Port above struct Device like the other classes
- ui-tomoko:
cheats.bml is reading from/writing to mediumPaths(0) [system folder
instead of game folder]
- ui-tomoko:
instead of mediumPaths(1) - call emulator->metadataPathID() or something
like that
|
|
|
Tim Allen
|
ccd8878d75 |
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
|
|
|
Tim Allen
|
875f031182 |
Update to v099r06 release.
byuu says: Changelog: - Super Famicom core converted to use nall/vfs - excludes Super Game Boy; since that's invoked from inside the GB core This was definitely the major obstacle to test nall/vfs' applicability. Things worked out pretty great in the end. We went from 22.0KiB (cartridge) + 18.6KiB (interface) to 24.5KiB (cartridge) + 11.4KiB (interface). Or 40.7KiB to 36.0KiB. This removes a very large source of indirection. Before it was: "coprocessor <=> cartridge <=> interface" for loading and saving data, and now it's just "coprocessor <=> cartridge". And it may make sense to eventually turn this into just "cartridge -> coprocessor" by making each coprocessor class handle its own markup parsing. It's nice to have all the manifest parsing in one location (well, sans MSU1); but it's also nice for loading/unloading to be handled by each coprocessor itself. So I'll have to think longer about that one. I've also started handling Interface::save() differently. Instead of keeping track of memory IDs and filenames, and iterating through that vector of objects ... instead I now have a system that mirrors the markup parsing on loading, but handles saving instead. This was actually the reason the code size savings weren't more significant, but I like this style more. As before, it removes an extra level of indirection. So ... next up, I need to port over the GB, then GBA, then WS cores. These shouldn't take too long since they're all very simple with just ROM+RAM(+RTC) right now. Then get the SGB callbacks using vfs. Then after that, gut all the old stream stuff from nall and higan. Kill the (load,save)Request stuff, rename the load(Gamepak)Request to something simpler, and then we should be good. Anyway ... these are some huge changes. |
|
|
Tim Allen
|
f04d9d58f5 |
Update to v099r05 release.
byuu says: Changelog: - added nall/vfs - converted Famicom core to use nall/vfs interface instead of nall/stream interface |
|
|
Tim Allen
|
40abcfc4a5 |
Update to v099r04 release.
byuu says: Changelog: - lots of code cleanups to processor/r6502 (the switch.cpp file is only halfway done ...) - lots of code cleanups to fc/cpu - removed fc/input - implemented fc/controller hex_usr, you may not like this, but I want to keep the controller port and expansion port interface separate, like I do with the SNES. I realize the NES' is used more for controllers, and the SNES' more for hardware expansions, but ... they're not compatible pinouts and you can't really connect one to the other. Right now, I've only implemented the controller portion. I'll have to get to the peripheral portion later. Also, the gamepad implementation there now may be wrong. It's based off the Super Famicom version obviously. I'm not sure if the Famicom has different behavior with latching $4016 writes, or not. But, it works in Mega Man II, so it's a start. Everyone, be sure to remap your controls, and then set port 1 -> gamepad after loading your first Famicom game with the new WIP. |
|
|
Tim Allen
|
c074c6e064 |
Update to v099 release.
byuu says:
Time for a new release. There are a few important emulation improvements
and a few new features; but for the most part, this release focuses on
major code refactoring, the details of which I will mostly spare you.
The major change is that, as of v099, the SNES balanced and performance
cores have been removed from higan. Basically, in addition to my five
other emulation cores, these were too much of a burden to maintain. And
they've come along as far as I was able to develop them. If you need to
use these cores, please use these two from the v098 release.
I'm very well aware that ~80% of the people using higan for SNES
emulation were using the two removed profiles. But they simply had
to go. Hopefully in the future, we can compensate for their loss by
increasing the performance of the accuracy core.
Changelog (since v098):
SFC: balanced profile removed
SFC: performance profile removed
SFC: expansion port devices can now be changed during gameplay (atlhough
you shouldn't)
SFC: fixed bug in SharpRTC leap year calculations
SFC: emulated new research findings for the S-DD1 coprocessor
SFC: fixed CPU emulation-mode wrapping bug with pei, [dp], [dp]+y
instructions [AWJ]
SFC: fixed Super Game Boy bug that caused the bottom tile-row to flicker
in games
GB: added MBC1M (multi-cart) mapper; icarus can't detect these so manual
manifests are needed for now
GB: corrected return value when HuC3 unmapped RAM is read; fixes Robopon
[endrift]
GB: improved STAT IRQ emulation; fixes Altered Space, etc [endrift,
gekkio]
GB: partial emulation of DMG STAT write IRQ bug; fixes Legend of Zerd,
Road Rash, etc
nall: execute() fix, for some Linux platforms that had trouble detecting
icarus
nall: new BitField class; which allows for simplifying flag/register
emulation in various cores
ruby: added Windows WASAPI audio driver (experimental)
ruby: remove attempts to call glSwapIntervalEXT (fixes crashing on some
Linux systems)
ui: timing settings panel removed
video: restored saturation, gamma, luminance settings
video: added new post-emulation sprite system; light gun cursors are
now higher-resolution
audio: new resampler (6th-order Butterworth biquad IIR); quite a bit
faster than the old one
audio: added optional basic reverb filter (for fun)
higan: refresh video outside cooperative threads (workaround for shoddy
code in AMD graphics drivers)
higan: individual emulation cores no longer have unique names
higan: really substantial code refactoring; 43% reduction in binary size
Off the bat, here are the known bugs:
hiro/Windows: focus stealing bug on startup. Needs to be fixed in hiro,
not with a cheap hack to tomoko.
higan/SFC: some of the coprocessors are saving some volatile memory to
disk. Completely harmless, but still needs to be fixed.
ruby/WASAPI: some sound cards have a lot of issues with the current driver
(eg FitzRoy's). We need to find a clean way to fix this before it
can be made the default driver. Which would be a huge win because
the latency improvements are substantial, and in exclusive mode,
WASAPI allows G-sync to work very well.
[From the v099 WIP thread, here's the changelog since v098r19:
- GB: don't force mode 1 during force-blank; fixes v098r16 regression
with many Game Boy games
- GB: only perform the STAT write IRQ bug during vblank, not hblank
(still not hardware accurate, though)
-Ed.]
|
|
|
Tim Allen
|
fdc41611cf |
Update to v098r14 release.
byuu says:
Changelog:
- improved attenuation of biquad filter by computing butterworth Q
coefficients correctly (instead of using the same constant)
- adding 1e-25 to each input sample into the biquad filters to try and
prevent denormalization
- updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb
happen in floating-point mode now
- good amount of work to make the base Emulator::Audio support any number
of output channels
- so that we don't have to do separate work on left/right channels;
and can instead share the code for each channel
- Emulator::Interface::audioSample(int16 left, int16 right); changed to:
- Emulator::Interface::audioSample(double* samples, uint channels);
- samples are normalized [-1.0 to +1.0]
- for now at least, channels will be the value given to
Emulator::Audio::reset()
- fixed GUI crash on startup when audio driver is set to None
I'm probably going to be updating ruby to accept normalized doubles as
well; but I'm not sure if I will try and support anything other 2-channel
audio output. It'll depend on how easy it is to do so; perhaps it'll be
a per-driver setting.
The denormalization thing is fierce. If that happens, it drops the
emulator framerate from 220fps to about 20fps for Game Boy emulation. And
that happens basically whenever audio output is silent. I'm probably
also going to make a nall/denormal.hpp file at some point with
platform-specific functionality to set the CPU state to "denormals as
zero" where applicable. I'll still add the 1e-25 offset (inaudible)
as another fallback.
|
|
|
Tim Allen
|
ae5d380d06 |
Update to v098r11 release.
byuu says:
Changelog:
- fixed nall/path.hpp compilation issue
- fixed ruby/audio/xaudio header declaration compilation issue (again)
- cleaned up xaudio2.hpp file to match my coding syntax (12.5% of the
file was whitespace overkill)
- added null terminator entry to nall/windows/utf8.hpp argc[] array
- nall/windows/guid.hpp uses the Windows API for generating the GUID
- this should stop all the bug reports where two nall users were
generating GUIDs at the exact same second
- fixed hiro/cocoa compilation issue with uint# types
- fixed major higan/sfc Super Game Boy audio latency issue
- fixed higan/sfc CPU core bug with pei, [dp], [dp]+y instructions
- major cleanups to higan/processor/r65816 core
- merged emulation/native-mode opcodes
- use camel-case naming on memory.hpp functions
- simplify address masking code for memory.hpp functions
- simplify a few opcodes themselves (avoid redundant copies, etc)
- rename regs.* to r.* to match modern convention of other CPU cores
- removed device.order<> concept from Emulator::Interface
- cores will now do the translation to make the job of the UI easier
- fixed plurality naming of arrays in Emulator::Interface
- example: emulator.ports[p].devices[d].inputs[i]
- example: vector<Medium> media
- probably more surprises
Major show-stoppers to the next official release:
- we need to work on GB core improvements: LY=153/0 case, multiple STAT
IRQs case, GBC audio output regs, etc.
- we need to re-add software cursors for light guns (Super Scope,
Justifier)
- after the above, we need to fix the turbo button for the Super Scope
I really have no idea how I want to implement the light guns. Ideally,
we'd want it in higan/video, so we can support the NES Zapper with the
same code. But this isn't going to be easy, because only the SNES knows
when its output is interlaced, and its resolutions can vary as
{256,512}x{224,240,448,480} which requires pixel doubling that was
hard-coded to the SNES-specific behavior, but isn't appropriate to be
exposed in higan/video.
|
|
|
Tim Allen
|
7cdae5195a |
Update to v098r07 release.
byuu says: Changelog: - GB: support modeSelect and RAM for MBC1M (Momotarou Collection) - audio: implemented native resampling support into Emulator::Stream - audio: removed nall::DSP completely Unfortunately, the new resampler didn't turn out quite as fast as I had hoped. The final hermite resampling added some overhead; and I had to bump up the kernel count to 500 from 400 to get the buzzing to go away on my main PC. I think that's due to it running at 48000hz output instead of 44100hz output, maybe? Compared to Ryphecha's: (NES) Mega Man 2: 167fps -> 166fps (GB) Mega Man II: 224fps -> 200fps (WSC) Riviera: 143fps -> 151fps Odd that the WS/WSC ends up faster while the DMG/CGB ends up slower. But this knocks 922 lines down to 146 lines. The only files left in all of higan not written (or rewritten) by me are ruby/xaudio2.h and libco/ppc.c |
|
|
Tim Allen
|
e2ee6689a0 |
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
|
|
|
Tim Allen
|
55e507d5df |
Update to v098r05 release.
byuu says:
Changelog:
- WS/WSC: re-added support for screen rotation (code is inside WS core)
- ruby: changed sample(uint16_t left, uint16_t right) to sample(int16_t
left, int16_t right);
- requires casting to uint prior to shifting in each driver, but
I felt it was misleading to use uint16_t just to avoid that
- ruby: WASAPI is now built in by default; has wareya's improvements,
and now supports latency adjust
- tomoko: audio settings panel has new "Exclusive Mode" checkbox for
WASAPI driver only
- note: although the setting *does* take effect in real-time, I'd
suggest restarting the emulator after changing it
- tomoko: audio latency can now be set to 0ms (which in reality means
"the minimum supported by the driver")
- all: increased cothread size from 512KiB to 2MiB to see if it fixes
bullshit AMD driver crashes
- this appears to cause a slight speed penalty due to cache locality
going down between threads, though
|
|
|
Tim Allen
|
a2d3b8ba15 |
Update to v098r04 release.
byuu says: Changelog: - SFC: fixed behavior of 21fx $21fe register when no device is connected (must return zero) - SFC: reduced 21fx buffer size to 1024 bytes in both directions to mirror the FT232H we are using - SFC: eliminated dsp/modulo-array.hpp [1] - higan: implemented higan/video interface and migrated all cores to it [2] [1] the echo history buffer was 8-bytes, so there was no need for it at all here. Not sure what I was thinking. The BRR buffer was 12-bytes, and has very weird behavior ... but there's only a single location in the code where it actually writes to this buffer. It's much easier to just write to the buffer three times there instead of implementing an entire class just to abstract away two lines of code. This change actually boosted the speed from ~124.5fps to around ~127.5fps, but that's within the margin of error for GCC. I doubt it's actually faster this way. The DSP core could really use a ton of work. It comes from a port of blargg's spc_dsp to my coding style, but he was extremely fond of using 32-bit signed integers everywhere. There's a lot of opportunity to remove red tape masking by resizing the variables to their actual state sizes. I really need to find where I put spc_dsp6.sfc from blargg. It's a great test to verify if I've made any mistakes in my implementation that would cause regressions. Don't suppose anyone has it? [2] so again, the idea is that higan/audio and higan/video are going to sit between the emulation cores and the user interfaces. The hope is to output raw encoding data from the emulation cores without having to worry about the video display format (generally 24-bit RGB) of the host display. And also to avoid having to repeat myself with eg three separate implementations of interframe blending, and so on. Furthermore, the idea is that the user interface can configure its side of the settings, and the emulation cores can configure their sides. Thus, neither has to worry about the other end. And now we can spin off new user interfaces much easier without having to mess with all of these things. Right now, I've implemented color emulation, interframe blending and SNES horizontal color bleed. I did not implement scanlines (and interlace effects for them) yet, but I probably will at some point. Further, for right now, the WonderSwan/Color screen rotation is busted and will only show games in the horizontal orientation. Obviously this must be fixed before the next official release, but I'll want to think about how to implement it. Also, the SNES light gun pointers are missing for now. Things are a bit messy right now as I've gone through several revisions of how to handle these things, so a good house cleaning is in order once everything is feature-complete again. I need to sit down and think through how and where I want to handle things like light gun cursors, LCD icons, and maybe even rasterized text messages. And obviously ... higan/audio is still just nall::DSP's headers. I need to revamp that whole interface. I want to make it quite powerful with a true audio mixer so I can handle things like SNES+SGB+MSU1+Voicer-Kun+SNES-CD (five separate audio streams at once.) The video system has the concept of "effects" for things like color bleed and interframe blending. I want to extend on this with useful other effects, such as NTSC simulation, maybe bringing back my mini-HQ2x filter, etc. I'd also like to restore the saturation/gamma/luma adjustment sliders ... I always liked allowing people to compensate for their displays without having to change settings system-wide. Lastly, I've always wanted to see some audio effects. Although I doubt we'll ever get my dream of CoreAudio-style profiles, I'd like to get some basic equalizer settings and echo/reverb effects in there. |
|
|
Tim Allen
|
7403e69307 |
Update to v098r02 release.
byuu says: Changelog: - SFC: fixed a regression on auto joypad polling due to missing parentheses - SFC: exported new PPU::vdisp() const -> uint; function [1] - SFC: merged PPU MMIO functions into the read/write handles (as I previously did for the CPU) - higan: removed individual emulator core names (bnes, bsnes, bgb, bgba, bws) [2] Forgot: - to remove /tomoko from the about dialog [1] note that technically I was relying on the cached, per-frame overscan setting when the CPU and light guns were polling the number of active display scanlines per frame. This was technically incorrect as you can change this value mid-frame and it'll kick in. I've never seen any game toggle overscan every frame, we only know about this because anomie tested this a long time ago. So, nothing should break, but ... you know how the SNES is. You can't even look at the code without something breaking, so I figured I'd mention it >_> [2] I'll probably keep referring to the SNES core as bsnes anyway. I don't mind if you guys use the b<system> names as shorthand. The simplification is mostly to make the branding easier. |
|
|
Tim Allen
|
7dc62e3a69 |
Update to v097r19 release.
byuu says:
Changelog:
- fixed nall/windows/guard.hpp
- fixed hiro/(windows,gtk)/header.hpp
- fixed Famicom PPU OAM reads (mask the correct bits when writing)
[hex_usr]
- removed the need for (system := system) lines from higan/GNUmakefile
- added "All" option to filetype dropdown for ROM loading
- allows loading GBC games in SGB mode (and technically non-GB(C)
games, which will obviously fail to do anything)
- loki can load and play game folders now (command-line only) (extremely
unimpressive; don't waste your time :P)
- the input is extremely hacked in as a quick placeholder; not sure
how I'm going to do mapping yet for it
|
|
|
Tim Allen
|
fc7d5991ce |
Update to v097r18 release.
byuu says:
Changelog:
- fixed SNES sprite priority regression from r17
- added nall/windows/guard.hpp to guard against global namespace
pollution (similar to nall/xorg/guard.hpp)
- almost fixed Windows compilation (still accuracy profile only, sorry)
- finished porting all of gba/ppu's registers over to the new .bit,.bits
format ... all GBA registers.cpp files gone now
- the "processors :=" line in the target-$(ui)/GNUmakefile is no longer
required
- processors += added to each emulator core
- duplicates are removed using the new nall/GNUmakefile's $(unique)
function
- SFC core can be compiled without the GB core now
- "-DSFC_SUPERGAMEBOY" is required to build in SGB support now (it's
set in target-tomoko/GNUmakefile)
- started once again on loki (higan/target-loki/) [as before, loki is
Linux/BSD only on account of needing hiro::Console]
loki shouldn't be too horrendous ... I hope. I just have the base
skeleton ready for now. But the code from v094r08 should be mostly
copyable over to it. It's just that it's about 50KiB of incredibly
tricky code that has to be just perfect, so it's not going to be quick.
But at least with the skeleton, it'll be a lot easier to pick away at it
as I want.
Windows compilation fix: move hiro/windows/header.hpp line 18 (header
guard) to line 16 instead.
|
|
|
Tim Allen
|
ef65bb862a |
Update to 20160215 release.
byuu says: Got it. Wow, that didn't hurt nearly as much as I thought it was going to. Dropped from 127.5fps to 123.5fps to use Natural/Integer for (u)int(8,16,32,64). That's totally worth the cost. |
|
|
Tim Allen
|
6c83329cae |
Update to v097r13 release.
byuu says: I refactored my schedulers. Added about ten lines to each scheduler, and removed about 100 lines of calling into internal state in the scheduler for the FC,SFC cores and about 30-40 lines for the other cores. All of its state is now private. Also reworked all of the entry points to static auto Enter() and auto main(). Where Enter() handles all the synchronization stuff, and main() doesn't need the while(true); loop forcing another layer of indentation everywhere. Took a few hours to do, but totally worth it. I'm surprised I didn't do this sooner. Also updated icarus gmake install rule to copy over the database. |
|
|
Tim Allen
|
32a95a9761 |
Update to v097r12 release.
byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now. |
|
|
Tim Allen
|
605a8aa3e9 |
Update to v097r05 release.
byuu says: More V30MZ implemented, a lot more to go. icarus now supports importing WS and WSC games. It expects them to have the correct file extension, same for GB and GBC. > Ugh, apparently HiDPI icarus doesn't let you press the check boxes. I set the flag value in the plist to false for now. Forgot to do it for higan, but hopefully I won't forget before release. |
|
|
Tim Allen
|
a8323d0d2b |
Update to v097r04 release.
byuu says: Lots of improvements. We're now able to start executing some V30MZ instructions. 32 of 256 opcodes implemented so far. I hope this goes without saying, but there's absolutely no point in loading WS/WSC games right now. You won't see anything until I have the full CPU and partial PPU implemented. ROM bank 2 works properly now, the I/O map is 16-bit (address) x 16-bit (data) as it should be*, and I have a basic disassembler in place (adding to it as I emulate new opcodes.) (* I don't know what happens if you access an 8-bit port in 16-bit mode or vice versa, so for now I'm just treating the handlers as always being 16-bit, and discarding the upper 8-bits when not needed.) |
|
|
Tim Allen
|
344e63d928 |
Update to v097r02 release.
byuu says:
Note: balanced/performance profiles still broken, sorry.
Changelog:
- added nall/GNUmakefile unique() function; used on linking phase of
higan
- added nall/unique_pointer
- target-tomoko and {System}::Video updated to use
unique_pointer<ClassName> instead of ClassName* [1]
- locate() updated to search multiple paths [2]
- GB: pass gekkio's if_ie_registers and boot_hwio-G test ROMs
- FC, GB, GBA: merge video/ into the PPU cores
- ruby: fixed ~AudioXAudio2() typo
[1] I expected this to cause new crashes on exit due to changing the
order of destruction of objects (and deleting things that weren't
deleted before), but ... so far, so good. I guess we'll see what crops
up, especially on OS X (which is already crashing for unknown reasons on
exit.)
[2] right now, the search paths are: programpath(), {configpath(),
"higan/"}, {localpath(), "higan/"}; but we can add as many more as we
want, and we can also add platform-specific versions.
|
|
|
Tim Allen
|
12df278c5b |
Update to v096r08 release.
byuu says:
Changelog:
- FC: scanline emulation support added
- SFC: balanced profile compiles again
- SFC: performance profile compiles again
- GB,GBC: more fixes to pass blargg's 07, 08, 11 APU tests
- tomoko: added input loss { pause, allow-input } options
- tomoko: refactored settings video menu options to { Video Scale, Video
Emulation, Video Shader }
- icarus: connected { About, Preferences, Quit } application menu options
|
|
|
Tim Allen
|
cec33c1d0f |
Update to v096r07 release.
byuu says: Changelog: - configuration files are now stored in localpath() instead of configpath() - Video gamma/saturation/luminance sliders are gone now, sorry - added Video Filter->Blur Emulation [1] - added Video Filter->Scanline Emulation [2] - improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn] [1] For the Famicom, this does nothing. For the Super Famicom, this performs horizontal blending for proper pseudo-hires translucency. For the Game Boy, Game Boy Color, and Game Boy Advance, this performs interframe blending (each frame is the average of the current and previous frame), which is important for things like the GBVideoPlayer. [2] Right now, this only applies to the Super Famicom, but it'll come to the Famicom in the future. For the Super Famicom, this option doesn't just add scanlines, it simulates the phosphor decay that's visible in interlace mode. If you observe an interlaced game like RPM Racing on a real SNES, you'll notice that even on perfectly still screens, the image appears to shake. This option emulates that effect. Note 1: the buffering right now is a little sub-optimal, so there will be a slight speed hit with this new support. Since the core is now generating native ARGB8888 colors, it might as well call out to the interface to lock/unlock/refresh the video, that way it can render directly to the screen. Although ... that might not be such a hot idea, since the GBx interframe blending reads from the target buffer, and that tends to be a catastrophic option for performance. Note 2: the balanced and performance profiles for the SNES are completely busted again. This WIP took 6 1/2 hours, and I'm exhausted. Very much not looking forward to working on those, since those two have all kinds of fucked up speedup tricks for non-interlaced and/or non-hires video modes. Note 3: if you're on Windows and you saved your system folders somewhere else, now'd be a good time to move them to %localappdata%/higan |
|
|
Tim Allen
|
82ec876302 |
Update to v096r05 release.
byuu says: Changelog: - GB: re-enabling the LCD resets the display to LY=0,LX=0 [1] - GB: emulated new findings (as of today!) for a DMG quirk that triggers an extra OAM STAT IRQ when Vblank STAT IRQs are off - GB: made VBK, BGPI, OBPI readable - GB: fixed APU length operations - GB: fixed APU sweep operations - NES: fixed cartridge/ -> board/ manifest lookups for mirroring/pinous - hiro/Cocoa: added endrift's plist keys Fixed: - Astro Rabby is fully playable, even the title screen works correctly - Bomb Jack is fully playable - Kirby's Dream Land 2 intro scrolling first scanline of Rick is now fixed - GBVideoPlayer functions correctly [2] - Shin Megami Tensei: Devichil series regression fixed [1] doesn't pass oam_bug-2/1-lcd_sync; because it seems to want LY=0,LX>0, and I can't step the PPU in a register write as it's not a state machine; the effect is emulated, it just starts the frame a tiny bit sooner. blargg's testing is brutal, you can't be even one cycle off or the test will fail. [2] note that you will need the GBC Display Emulation shader from hunterk's repository, or it will look like absolute shit. The inter-frame blending is absolutely critical here. |
|
|
Tim Allen
|
72b6a8b32e |
Update to v096r04 release.
byuu says: Changelog: - fixed S-DD1 RAM writes (Star Ocean audio fixed) - applied all of the DMG test ROM fixes discussed earlier; passes many more test ROMs now - at least until the GBVideoPlayer is working: for debugging purposes, CPU/PPU single-step now instead of sync just-in-time (~30% slower) - fixed OS X crash on NSTextView (hopefully, would be very odd if not) Unfortunately passing these test ROMs caused my favorite GB/GBC game to break all of its graphics =( Shin Megami Tensei - Devichil - Kuro no Sho (Japan) is all garbled now. I'm really quite bummed by this ... but I guess I'll go through and revert r04's fixes one at a time until I find what's causing it. On the plus side, Astro Rabby is playable now. Still acts weird when pressing B/A on the first screen, but the start button will start the game. EDIT: got it. Shin Megami Tensei - Devichil requires FF4F (VBK) to be readable. Before, it was always returning 0x00. With my return 0xFF patch, that broke. But it should be returning the VBK value, which also fixes it. Also need to handle FF68/FF6A reads. Was really hoping that'd help GBVideoPlayer too, but nope. It doesn't read any of those three registers. |
|
|
Tim Allen
|
47d4bd4d81 |
Update to v096r01 release.
byuu says: Changelog: - restructured the project and removed a whole bunch of old/dead directives from higan/GNUmakefile - huge amounts of work on hiro/cocoa (compiles but ~70% of the functionality is commented out) - fixed a masking error in my ARM CPU disassembler [Lioncash] - SFC: decided to change board cic=(411,413) back to board region=(ntsc,pal) ... the former was too obtuse If you rename Boolean (it's a problem with an include from ruby, not from hiro) and disable all the ruby drivers, you can compile an OS X binary, but obviously it's not going to do anything. It's a boring WIP, I just wanted to push out the project structure change now at the start of this WIP cycle. |
|
|
Tim Allen
|
4e2eb23835 |
Update to v093 release.
byuu says: Changelog: - added Cocoa target: higan can now be compiled for OS X Lion [Cydrak, byuu] - SNES/accuracy profile hires color blending improvements - fixes Marvelous text [AWJ] - fixed a slight bug in SNES/SA-1 VBR support caused by a typo - added support for multi-pass shaders that can load external textures (requires OpenGL 3.2+) - added game library path (used by ananke->Import Game) to Settings->Advanced - system profiles, shaders and cheats database can be stored in "all users" shared folders now (eg /usr/share on Linux) - all configuration files are in BML format now, instead of XML (much easier to read and edit this way) - main window supports drag-and-drop of game folders (but not game files / ZIP archives) - audio buffer clears when entering a modal loop on Windows (prevents audio repetition with DirectSound driver) - a substantial amount of code clean-up (probably the biggest refactoring to date) One highly desired target for this release was to default to the optimal drivers instead of the safest drivers, but because AMD drivers don't seem to like my OpenGL 3.2 driver, I've decided to postpone that. AMD has too big a market share. Hopefully with v093 officially released, we can get some public input on what AMD doesn't like. |
|
|
Tim Allen
|
c74865e171 |
Update to v092r10 release.
byuu says: Changelog: - you can now drop game folders (not game files, sorry) onto higan's main window to load them - audio buffer will clear on Windows when entering modal loop (entering menu, moving or resizing window) - this prevents DirectSound driver's audio repetition - ruby defaults to the optimal driver for each platform, rather than the safest driver, now - added Cydrak's gl_Position.zw change to ruby - added fixes for all the changes to nall, ruby, phoenix over the past three months |
|
|
Tim Allen
|
29ea5bd599 |
Update to v092r09 release.
byuu says:
This will be another massive diff from the previous version.
All of higan was updated to use the new foo& bar syntax, and I also
updated switch statements to be consistent as well (but not in the
disassemblers, was starting to get an RSI just from what I already did.)
phoenix/{windows, cocoa, qt} need to be updated to use "string foo"
instead of "const string& foo", and after that, the major diffs should
be finished.
This archive is the first time I'm posting my copy-on-write,
size+capacity nall::string class, so any feedback on that is welcome as
well.
|
|
|
Tim Allen
|
75dab443b4 |
Update to v092r08 release.
byuu says: Changelog: - fixed cartridge load window focus on Windows - lots of updates to nall, ruby and phoenix - ethos and Emulator::Interface updated from "foo &bar" to "foo& bar" syntax (work-in-progress) Before I had mixed the two ways to declare variables/arguments all over the place, so the goal is to unify them all for consistency. So the changelog for this release will be massive (750KB >.>) due to the syntax change. Yeah, that's what I spent the last three days working on ... |
|
|
Tim Allen
|
fdd3ea490e |
Update to v092r04 release.
byuu says:
This is the first release with full support for OS X, although it's
certainly still very buggy.
Known issues:
- window status bars are still unsupported (they just don't show up)
- you get the bad keypress chime when you use the keyboard
- window geometry and font metrics aren't perfect (bit of clipping here
and there)
- list view headers that aren't auto-sized are sometimes too short (file
browser)
- input assignment is really rough (assigning a key also moves around in
the list or beeps at you)
Custom OS X integration support so far:
- 512x512 ICNS application icon: will look razor-sharp even on a retina
display
- basic Info.plist added to application bundle
- program menu about, preferences, quit all connected
- Settings->Configuration removed (use higan->Preferences instead)
- global menubar
To compile and use this, you'll need:
- Xz Utils (to extract .tar.xz)
- Xcode 4.6
- Lion 10.7.4 or newer
mkdir higan_v092r04
tar -xJf higan_v092r04.tar.xz -C higan_v092r04
cd higan_v092r04
make -j 2
ananke is missing, and I haven't updated purify yet, so you'll have to
move game folders from Windows or Linux over, or make them by hand (a
not so enjoyable experience, to say the least.)
|