ShuriZma
/
bsnes
mirror of https://github.com/bsnes-emu/bsnes.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
bsnes/higan/sfc/GNUmakefile

53 lines
3.0 KiB
Makefile
Raw Normal View History

Update to v103r30 release. byuu says: Changelog: - processor/arm7tdmi: completed implemented - gba/cpu, sfc/coprocessor/armdsp: use arm7tdmi instead of arm - sfc/cpu: experimental fix for newly discovered HDMA emulation issue Notes: The ARM7TDMI core crashes pretty quickly when trying to run GBA games, and I'm certain the same will be the case with the ST018. It was never all that likely I could rewrite 70KiB of code in 20 hours and have it work perfectly on the first try. So, now it's time for lots and lots of debugging. Any help would *really* be appreciated, if anyone were up for comparing the two implementations for regressions =^-^= I often have a really hard time spotting simple typos that I make. Also, the SNES HDMA fix is temporary. I would like it if testers could run through a bunch of games that are known for being tricky with HDMA (or if these aren't known to said tester, any games are fine then.) If we can confirm regressions, then we'll know the fix is either incorrect or incomplete. But if we don't find any, then it's a good sign that we're on the right path.
2017-08-09 11:11:59 +00:00
processors += wdc65816 spc700 arm7tdmi gsu hg51b upd96050
Update to v097r18 release. byuu says: Changelog: - fixed SNES sprite priority regression from r17 - added nall/windows/guard.hpp to guard against global namespace pollution (similar to nall/xorg/guard.hpp) - almost fixed Windows compilation (still accuracy profile only, sorry) - finished porting all of gba/ppu's registers over to the new .bit,.bits format ... all GBA registers.cpp files gone now - the "processors :=" line in the target-$(ui)/GNUmakefile is no longer required - processors += added to each emulator core - duplicates are removed using the new nall/GNUmakefile's $(unique) function - SFC core can be compiled without the GB core now - "-DSFC_SUPERGAMEBOY" is required to build in SGB support now (it's set in target-tomoko/GNUmakefile) - started once again on loki (higan/target-loki/) [as before, loki is Linux/BSD only on account of needing hiro::Console] loki shouldn't be too horrendous ... I hope. I just have the base skeleton ready for now. But the code from v094r08 should be mostly copyable over to it. It's just that it's about 50KiB of incredibly tricky code that has to be just perfect, so it's not going to be quick. But at least with the skeleton, it'll be a lot easier to pick away at it as I want. Windows compilation fix: move hiro/windows/header.hpp line 18 (header guard) to line 16 instead.
2016-02-25 10:38:03 +00:00
Update to v100r03 release. byuu says: Changelog: - moved Thread, Scheduler, Cheat functionality into emulator/ for all cores - start of actual Mega Drive emulation (two 68K instructions) I'm going to be rather terse on MD emulation, as it's too early for any meaningful dialogue here.
2016-07-10 05:28:26 +00:00
objects += sfc-interface sfc-system sfc-controller
objects += sfc-cartridge sfc-memory
objects += sfc-cpu sfc-smp sfc-dsp sfc-ppu
Update to v101r19 release. byuu says: Changelog: - added \~130 new PAL games to icarus (courtesy of Smarthuman and aquaman) - added all three Korean-localized games to icarus - sfc: removed SuperDisc emulation (it was going nowhere) - sfc: fixed MSU1 regression where the play/repeat flags were not being cleared on track select - nall: cryptography support added; will be used to sign future databases (validation will always be optional) - minor shims to fix compilation issues due to nall changes The real magic is that we now have 25-30% of the PAL SNES library in icarus! Signing will be tricky. Obviously if I put the public key inside the higan archive, then all anyone has to do is change that public key for their own releases. And if you download from my site (which is now over HTTPS), then you don't need the signing to verify integrity. I may just put the public key on my site on my site and leave it at that, we'll see.
2016-10-27 21:16:58 +00:00
objects += sfc-expansion sfc-satellaview sfc-21fx
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
objects += sfc-icd2 sfc-mcc sfc-nss sfc-event
objects += sfc-sa1 sfc-superfx
objects += sfc-armdsp sfc-hitachidsp sfc-necdsp
objects += sfc-epsonrtc sfc-sharprtc
Update to v101r19 release. byuu says: Changelog: - added \~130 new PAL games to icarus (courtesy of Smarthuman and aquaman) - added all three Korean-localized games to icarus - sfc: removed SuperDisc emulation (it was going nowhere) - sfc: fixed MSU1 regression where the play/repeat flags were not being cleared on track select - nall: cryptography support added; will be used to sign future databases (validation will always be optional) - minor shims to fix compilation issues due to nall changes The real magic is that we now have 25-30% of the PAL SNES library in icarus! Signing will be tricky. Obviously if I put the public key inside the higan archive, then all anyone has to do is change that public key for their own releases. And if you download from my site (which is now over HTTPS), then you don't need the signing to verify integrity. I may just put the public key on my site on my site and leave it at that, we'll see.
2016-10-27 21:16:58 +00:00
objects += sfc-spc7110 sfc-sdd1
objects += sfc-obc1 sfc-msu1
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
objects += sfc-bsmemory sfc-sufamiturbo
Update to v088r07 release. byuu says: (r05 and r06 were save points between large core modifications) I would really appreciate extensive regression testing (especially around SuperFX, Cx4, ST018, DSP-n, ST-01n, NES, GB) at this point. The most critical core changes should be completed now. And it was an unbelievable amount of restructuring. Changelog: - SuperFX core moved to Processor::GSU - SNES::CPU core moved to Processor::R65816 - SNES::SMP core moved to Processor::SPC700 - NES::CPU core renamed to Processor::R6502 - use filestream to load RAM files from interface - save states store SHA256 instead of CRC32 (CRC32 usage removed entirely from bsnes) - nes/ -> fc/ and NES -> FC - snes/ -> sfc/ and SNES -> SFC - SuperFamicom::MappedRAM::copy uses stream instead of data+size - Linux port uses gcc-4.7 (still using only gcc-4.6 subset, so you can make a gcc-4.6 symlink for now if you like.) - all profiles and all targets compile and work properly All eight instruction set cores have been moved to processor/ now. Consistency's a wonderful thing. The last remnants of NES/SNES are now limited to target-ui code; and the nall/(system) folder names. I'm building with gcc-4.7 on my Linux box now because the resultant binaries are up to 20% faster (seriously) than gcc-4.6.
2012-04-29 06:16:44 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-interface.o: sfc/interface/interface.cpp $(call rwildcard,sfc/interface)
obj/sfc-system.o: sfc/system/system.cpp $(call rwildcard,sfc/system/)
obj/sfc-controller.o: sfc/controller/controller.cpp $(call rwildcard,sfc/controller/)
obj/sfc-cartridge.o: sfc/cartridge/cartridge.cpp $(call rwildcard,sfc/cartridge/)
obj/sfc-memory.o: sfc/memory/memory.cpp $(call rwildcard,sfc/memory/)
Update to v098r01 release. byuu says: Changelog: - SFC: balanced profile removed - SFC: performance profile removed - SFC: code for handling non-threaded CPU, SMP, DSP, PPU removed - SFC: Coprocessor, Controller (and expansion port) shared Thread code merged to SFC::Cothread - Cothread here just means "Thread with CPU affinity" (couldn't think of a better name, sorry) - SFC: CPU now has vector<Thread*> coprocessors, peripherals; - this is the beginning of work to allow expansion port devices to be dynamically changed at run-time - ruby: all audio drivers default to 48000hz instead of 22050hz now if no frequency is assigned - note: the WASAPI driver can default to whatever the native frequency is; doesn't have to be 48000hz - tomoko: removed the ability to change the frequency from the UI (but it will display the frequency used) - tomoko: removed the timing settings panel - the goal is to work toward smooth video via adaptive sync - the model is broken by not being in control of the audio frequency anyway - it's further broken by PAL running at 50hz and WSC running at 75hz - it was always broken anyway by SNES interlace timing varying from progressive timing - higan: audio/ stub created (for now, it's just nall/dsp/ moved here and included as a header) - higan: video/ stub created - higan/GNUmakefile: now includes build rules for essential components (libco, emulator, audio, video) The audio changes are in preparation to merge wareya's awesome WASAPI work without the need for the nall/dsp resampler.
2016-04-09 03:40:12 +00:00
obj/sfc-cpu.o: sfc/cpu/cpu.cpp $(call rwildcard,sfc/cpu/)
obj/sfc-smp.o: sfc/smp/smp.cpp $(call rwildcard,sfc/smp/)
obj/sfc-dsp.o: sfc/dsp/dsp.cpp $(call rwildcard,sfc/dsp/)
obj/sfc-ppu.o: sfc/ppu/ppu.cpp $(call rwildcard,sfc/ppu/)
Update to v088r07 release. byuu says: (r05 and r06 were save points between large core modifications) I would really appreciate extensive regression testing (especially around SuperFX, Cx4, ST018, DSP-n, ST-01n, NES, GB) at this point. The most critical core changes should be completed now. And it was an unbelievable amount of restructuring. Changelog: - SuperFX core moved to Processor::GSU - SNES::CPU core moved to Processor::R65816 - SNES::SMP core moved to Processor::SPC700 - NES::CPU core renamed to Processor::R6502 - use filestream to load RAM files from interface - save states store SHA256 instead of CRC32 (CRC32 usage removed entirely from bsnes) - nes/ -> fc/ and NES -> FC - snes/ -> sfc/ and SNES -> SFC - SuperFamicom::MappedRAM::copy uses stream instead of data+size - Linux port uses gcc-4.7 (still using only gcc-4.6 subset, so you can make a gcc-4.6 symlink for now if you like.) - all profiles and all targets compile and work properly All eight instruction set cores have been moved to processor/ now. Consistency's a wonderful thing. The last remnants of NES/SNES are now limited to target-ui code; and the nall/(system) folder names. I'm building with gcc-4.7 on my Linux box now because the resultant binaries are up to 20% faster (seriously) than gcc-4.6.
2012-04-29 06:16:44 +00:00
Update to v098r03 release. byuu says: It took several hours, but I've rebuilt much of the SNES' bus memory mapping architecture. The new design unifies the cartridge string-based mapping ("00-3f,80-bf:8000-ffff") and internal bus.map calls. The map() function now has an accompanying unmap() function, and instead of a fixed 256 callbacks, it'll scan to find the first available slot. unmap() will free slots up when zero addresses reference a given slot. The controllers and expansion port are now both entirely dynamic. Instead of load/unload/power/reset, they only have the constructor (power/reset/load) and destructor (unload). What this means is you can now dynamically change even expansion port devices after the system is loaded. Note that this is incredibly dangerous and stupid, but ... oh well. The whole point of this was for 21fx. There's no way to change the expansion port device prior to loading a game, but if the 21fx isn't active, then the reset vector hijack won't work. Now you can load a 21fx game, change the expansion port device, and simply reset the system to active the device. The unification of design between controller port devices and expansion port devices is nice, and overall this results in a reduction of code (all of the Mapping stuff in Cartridge is gone, replaced with direct bus mapping.) And there's always the potential to expand this system more in the future now. The big missing feature right now is the ability to push/pop mappings. So if you look at how the 21fx does the reset vector, you might vomit a little bit. But ... it works. Also changed exit(0) to _exit(0) in the POSIX version of nall::execute. [The _exit(0) thing is an attempt to make higan not crash when it tries to launch icarus and it's not on $PATH. The theory is that higan forks, then the child tries to exec icarus and fails, so it exits, all the unique_ptrs clean up their resources and tell the X server to free things the parent process is still using. Calling _exit() prevents destructors from running, and seems to prevent the problem. -Ed.]
2016-04-09 10:21:18 +00:00
obj/sfc-expansion.o: sfc/expansion/expansion.cpp $(call rwildcard,sfc/expansion/)
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-satellaview.o: sfc/expansion/satellaview/satellaview.cpp $(call rwildcard,sfc/expansion/satellaview/)
Update to v097r31 release. byuu says: Changelog: - WS: fixed sprite window clipping (again) - WS: don't set IRQ status bits of IRQ enable bits are clear - SFC: signed/unsigned -> int/uint for DSP core - SFC: removed eBoot - SFC: added 21fx (not the same as the old precursor to MSU1; just reusing the name) Note: XI Little doesn't seem to be fixed after all ... but the other three are. So I guess we're at 13 bugs :( And holy shit that music when you choose a menu option is one of the worst sounds I've ever heard in my life >_<
2016-03-29 09:15:01 +00:00
obj/sfc-21fx.o: sfc/expansion/21fx/21fx.cpp $(call rwildcard,sfc/expansion/21fx/)
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-icd2.o: sfc/coprocessor/icd2/icd2.cpp $(call rwildcard,sfc/coprocessor/icd2/)
obj/sfc-mcc.o: sfc/coprocessor/mcc/mcc.cpp $(call rwildcard,sfc/coprocessor/mcc/)
obj/sfc-nss.o: sfc/coprocessor/nss/nss.cpp $(call rwildcard,sfc/coprocessor/nss/)
obj/sfc-event.o: sfc/coprocessor/event/event.cpp $(call rwildcard,sfc/coprocessor/event/)
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-sa1.o: sfc/coprocessor/sa1/sa1.cpp $(call rwildcard,sfc/coprocessor/sa1/)
obj/sfc-superfx.o: sfc/coprocessor/superfx/superfx.cpp $(call rwildcard,sfc/coprocessor/superfx/)
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-armdsp.o: sfc/coprocessor/armdsp/armdsp.cpp $(call rwildcard,sfc/coprocessor/armdsp/)
obj/sfc-hitachidsp.o: sfc/coprocessor/hitachidsp/hitachidsp.cpp $(call rwildcard,sfc/coprocessor/hitachidsp/)
obj/sfc-necdsp.o: sfc/coprocessor/necdsp/necdsp.cpp $(call rwildcard,sfc/coprocessor/necdsp/)
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-epsonrtc.o: sfc/coprocessor/epsonrtc/epsonrtc.cpp $(call rwildcard,sfc/coprocessor/epsonrtc/)
obj/sfc-sharprtc.o: sfc/coprocessor/sharprtc/sharprtc.cpp $(call rwildcard,sfc/coprocessor/sharprtc/)
Update to v089r06 release. byuu says: Changelog: - renamed SRTC -> SharpRTC - renamed RTC4513 -> EpsonRTC (consistent with DSP naming schema) - full emulation of invalid BCD values for EpsonRTC - fixed EpsonRTC IRQ mask Remaining SPC7110 tasks: - RTC: test 30-second adjust with all values from 00-7f - RTC: hold is supposed to tick the clock one second after being released? - RTC: wait times are too long (need to use >32KHz oscillation to simulate it properly) - Data Port: test $4818 more thoroughly (not too important) - Decompression: test $480c more thoroughly (very important) - Decompression: perform some tests on DMA transferring data, especially with $4807 set Write-offs, at least for now: - Decompression: emulation of the crash/glitch behavior seen on the real chip when fed invalid data - Decompression: I can find no use of $4808 - ALU: Booth cycles for MUL/DIV (this could actually be rather important if the game reads simpler values quickly [some shoddy games did this with the CPU ALU]) - RTC: delay after hold release for $4841 accesses - RTC: 125uS delay after 30-second adjust that will screw with registers in odd ways if your read or write too soon - RTC: psychotic behavior of reading too early returning port address - 1
2012-05-22 12:10:00 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-spc7110.o: sfc/coprocessor/spc7110/spc7110.cpp $(call rwildcard,sfc/coprocessor/spc7110/)
obj/sfc-sdd1.o: sfc/coprocessor/sdd1/sdd1.cpp $(call rwildcard,sfc/coprocessor/sdd1/)
obj/sfc-obc1.o: sfc/coprocessor/obc1/obc1.cpp $(call rwildcard,sfc/coprocessor/obc1/)
Update to higan v092r01, ananke v02r01 and purify v03r01 releases. byuu says: higan changelog: - compiler is set to g++-4.7, subst(cc,++) rule is gone, C files compile with $(compiler) -x c - make throws an error when you specify an invalid profile or compile on an unsupported platform (instead of hanging forever) - added unverified.png to resources (causes too big of a speed hit to actually check for folder/unverified file ... so disabled for now) - fixed default browser paths for Game Boy, Sufami Turbo and BS-X Satellaview (have to delete paths.cfg to see this) - browser home button seeks to configpath()/higan/library.cfg - settings->driver is now settings->advanced, and it adds game library path setting and profile information - emulation cores now load manifest files internally, manifest.bml is not required for a game folder to be recognized by higan as such - BS-X Satellaview and Sufami Turbo slot cartridge handling moved out of sfc/chip and into sfc/slot - Video::StartFullScreen only sets fullscreen when a game is specified on the command-line purify and ananke changelog: - library output path shown in purify window - added button to change library path - squelch firmware warning windows to prevent multi-threading crash, but only via purify (they show up in higan still)
2013-01-21 12:27:15 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-msu1.o: sfc/coprocessor/msu1/msu1.cpp $(call rwildcard,sfc/coprocessor/msu1/)
Update to v092r02 release. byuu says: Changelog: - merged AWJ's hires color blending improvements (most notably: fixes Marvelous' text) - created sfc/base/ to store base unit (expansion port device) emulation - synchronized the markup of Satellaview and Sufami Turbo cartridge slots in the board markup - fixed "Initializing ..." typo in timing settings If at all possible, I'd really like to have heavy testing of games that use hires graphics to check for any regressions. I trust AWJ's code, and all of the test ROMs I have thrown at it all appear to work great. But better safe than sorry. Same deal for any core changes, it's a lot better to catch it now than after v093 is released.
2013-01-23 08:28:35 +00:00
Update to v097r19 release. byuu says: Changelog: - fixed nall/windows/guard.hpp - fixed hiro/(windows,gtk)/header.hpp - fixed Famicom PPU OAM reads (mask the correct bits when writing) [hex_usr] - removed the need for (system := system) lines from higan/GNUmakefile - added "All" option to filetype dropdown for ROM loading - allows loading GBC games in SGB mode (and technically non-GB(C) games, which will obviously fail to do anything) - loki can load and play game folders now (command-line only) (extremely unimpressive; don't waste your time :P) - the input is extremely hacked in as a quick placeholder; not sure how I'm going to do mapping yet for it
2016-02-28 11:42:52 +00:00
obj/sfc-bsmemory.o: sfc/slot/bsmemory/bsmemory.cpp $(call rwildcard,sfc/slot/bsmemory/)
obj/sfc-sufamiturbo.o: sfc/slot/sufamiturbo/sufamiturbo.cpp $(call rwildcard,sfc/slot/sufamiturbo/)