Update to v094r23 release.
byuu says:
The library window is gone, and replaced with
hiro::BrowserWindow::openFolder(). This gives navigation capabilities to
game loading, and it also completes our slotted cart selection code. As
an added bonus, it's less code this way, too.
I also set the window size to consistent sizes between all emulated
systems, so that switching between SFC and GB don't cause the window
size to keep changing, and so that the scaling size is consistent (eg at
normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders
in GB/GBA mode, but it doesn't look that bad, and it's not like many
people ever use these modes anyway.
Finally, added the placeholder tabs for video, audio and timing. I don't
intend to add the timing calculator code to v095 (it might be better as
a separate tool), but I'll add the ability to set video/audio rates, at
least.
Glitch 1: despite selecting the first item in the BrowserDialog list, if
you press enter when the window appears, it doesn't activate the item
until you press an arrow key first.
Glitch 2: in Game Boy mode, if you set the 4x window size, it's not
honoring the full requested height because the viewport is smaller than
the window. 8+ years of trying to get GTK+ and Qt to simply set the god
damned window size I ask for, and I still can't get them to do it
reliably.
Remaining issues:
- finish configuration panels (video, audio, timing)
- fix ruby driver compilation on Windows
- add DIP switch selection window (NSS) [I may end up punting this one
to v096]
2015-05-30 11:39:09 +00:00
|
|
|
AudioSettings::AudioSettings(TabFrame* parent) : TabFrameItem(parent) {
|
2016-01-07 08:14:33 +00:00
|
|
|
setIcon(Icon::Device::Speaker);
|
Update to v094r23 release.
byuu says:
The library window is gone, and replaced with
hiro::BrowserWindow::openFolder(). This gives navigation capabilities to
game loading, and it also completes our slotted cart selection code. As
an added bonus, it's less code this way, too.
I also set the window size to consistent sizes between all emulated
systems, so that switching between SFC and GB don't cause the window
size to keep changing, and so that the scaling size is consistent (eg at
normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders
in GB/GBA mode, but it doesn't look that bad, and it's not like many
people ever use these modes anyway.
Finally, added the placeholder tabs for video, audio and timing. I don't
intend to add the timing calculator code to v095 (it might be better as
a separate tool), but I'll add the ability to set video/audio rates, at
least.
Glitch 1: despite selecting the first item in the BrowserDialog list, if
you press enter when the window appears, it doesn't activate the item
until you press an arrow key first.
Glitch 2: in Game Boy mode, if you set the 4x window size, it's not
honoring the full requested height because the viewport is smaller than
the window. 8+ years of trying to get GTK+ and Qt to simply set the god
damned window size I ask for, and I still can't get them to do it
reliably.
Remaining issues:
- finish configuration panels (video, audio, timing)
- fix ruby driver compilation on Windows
- add DIP switch selection window (NSS) [I may end up punting this one
to v096]
2015-05-30 11:39:09 +00:00
|
|
|
setText("Audio");
|
|
|
|
|
|
|
|
layout.setMargin(5);
|
2015-06-15 22:26:47 +00:00
|
|
|
|
Update to v103r18 release.
byuu says:
Changelog:
- tomoko: improved handling of changing audio devices on the audio
settings panel
- ruby/audio/wasapi: added device enumeration and selection support¹
- ruby/audio/wasapi: release property store handle from audio device
- ruby/audio/wasapi: fix exclusive mode buffer filling
- ruby/video/glx2: ported to new API -- tested and confirmed working
great²
- ruby/video/sdl: fixed initialization -- tested and confirmed working
on FreeBSD now³
- ruby/video/xv: ported to new API -- tested and mostly working great,
sans fullscreen mode⁴
Errata:
- accidentally changed "Driver Settings" label to "Driver" on the
audio settings tab because I deleted the line and forgot the
"Settings" part
- need to use "return initialize();" from setDevice() in the WASAPI
driver, instead of "return true;", so device selection is currently
not functioning in this WIP for said driver
¹: for now, this will likely end up selecting the first available
endpoint device, which is probably wrong. I need to come up with a
system to expose good 'default values' when selecting new audio drivers,
or changing audio device settings.
²: glx2 is a fallback driver for system with only OpenGL 2.0 and no
OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards.
³: although I really should track down why InputManager::poll() is
crashing the emulator when Video::ready() returns false ...
⁴: really bizarrely, when entering fullscreen mode, it looks like the
image was a triangle strip, and the bottom right triange is missing, and
the top left triangle skews the entire image into it. I'm suspecting
this is a Radeon driver bug when trying to create a 2560x1600 X-Video
surface. The glitch persists when exiting fullscreen, too.
If anyone can test the X-Video driver on their Linux/BSD system, it'd be
appreciated. If it's just my video card, I'll ignore it. If not,
hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
|
|
|
driverLabel.setFont(Font().setBold()).setText("Driver");
|
2015-06-15 22:26:47 +00:00
|
|
|
|
Update to v103r15 release.
byuu says:
Changelog:
- ruby: rewrote the API interfaces for Video, Audio, Input
- ruby/audio: can now select the number of output channels (not useful
to higan, sorry)
- ruby/asio: various improvements
- tomoko: audio settings panel can now select separate audio devices
(for ASIO, OSS so far)
- tomoko: audio settings panel frequency and latency lists are
dynamically populated now
Note: due to the ruby API rewrite, most drivers will not compile. Right
now, the following work:
- video: Direct3D, XShm
- audio: ASIO, OSS
- input: Windows, SDL, Xlib
It takes a really long time to rewrite these (six hours to do the
above), so it's going to be a while before we're back at 100%
functionality again.
Errata:
- ASIO needs device(), setDevice()
- need to call setDevice() at program startup to populate
frequency/latency settings properly
- changing the device and/or frequency needs to update the emulator
resampler rates
The really hard part is going to be the last one: the only way to change
the emulator frequency is to flush all the audio streams and then
recompute all the coefficients for the resamplers. If this is called
during emulation, all audio streams will be erased and thus no sound
will be output. I'll most likely be forced to simply ignore
device/frequency changes until the user loads another game. It is at
least possible to toggle the latency dynamically.
2017-07-17 05:11:18 +00:00
|
|
|
deviceLabel.setText("Device:");
|
Update to v103r18 release.
byuu says:
Changelog:
- tomoko: improved handling of changing audio devices on the audio
settings panel
- ruby/audio/wasapi: added device enumeration and selection support¹
- ruby/audio/wasapi: release property store handle from audio device
- ruby/audio/wasapi: fix exclusive mode buffer filling
- ruby/video/glx2: ported to new API -- tested and confirmed working
great²
- ruby/video/sdl: fixed initialization -- tested and confirmed working
on FreeBSD now³
- ruby/video/xv: ported to new API -- tested and mostly working great,
sans fullscreen mode⁴
Errata:
- accidentally changed "Driver Settings" label to "Driver" on the
audio settings tab because I deleted the line and forgot the
"Settings" part
- need to use "return initialize();" from setDevice() in the WASAPI
driver, instead of "return true;", so device selection is currently
not functioning in this WIP for said driver
¹: for now, this will likely end up selecting the first available
endpoint device, which is probably wrong. I need to come up with a
system to expose good 'default values' when selecting new audio drivers,
or changing audio device settings.
²: glx2 is a fallback driver for system with only OpenGL 2.0 and no
OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards.
³: although I really should track down why InputManager::poll() is
crashing the emulator when Video::ready() returns false ...
⁴: really bizarrely, when entering fullscreen mode, it looks like the
image was a triangle strip, and the bottom right triange is missing, and
the top left triangle skews the entire image into it. I'm suspecting
this is a Radeon driver bug when trying to create a 2560x1600 X-Video
surface. The glitch persists when exiting fullscreen, too.
If anyone can test the X-Video driver on their Linux/BSD system, it'd be
appreciated. If it's just my video card, I'll ignore it. If not,
hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
|
|
|
deviceList.onChange([&] { updateDevice(); updateDriver(); });
|
|
|
|
|
|
|
|
//the device list never changes once a driver is activated;
|
|
|
|
//however, the available frequencies and latencies may change when the active device is changed
|
|
|
|
for(auto& device : audio->information().devices) {
|
|
|
|
deviceList.append(ComboButtonItem().setText(device));
|
|
|
|
if(device == settings["Audio/Device"].text()) {
|
|
|
|
deviceList.item(deviceList.itemCount() - 1).setSelected();
|
|
|
|
}
|
|
|
|
}
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
|
|
|
|
frequencyLabel.setText("Frequency:");
|
Update to v103r15 release.
byuu says:
Changelog:
- ruby: rewrote the API interfaces for Video, Audio, Input
- ruby/audio: can now select the number of output channels (not useful
to higan, sorry)
- ruby/asio: various improvements
- tomoko: audio settings panel can now select separate audio devices
(for ASIO, OSS so far)
- tomoko: audio settings panel frequency and latency lists are
dynamically populated now
Note: due to the ruby API rewrite, most drivers will not compile. Right
now, the following work:
- video: Direct3D, XShm
- audio: ASIO, OSS
- input: Windows, SDL, Xlib
It takes a really long time to rewrite these (six hours to do the
above), so it's going to be a while before we're back at 100%
functionality again.
Errata:
- ASIO needs device(), setDevice()
- need to call setDevice() at program startup to populate
frequency/latency settings properly
- changing the device and/or frequency needs to update the emulator
resampler rates
The really hard part is going to be the last one: the only way to change
the emulator frequency is to flush all the audio streams and then
recompute all the coefficients for the resamplers. If this is called
during emulation, all audio streams will be erased and thus no sound
will be output. I'll most likely be forced to simply ignore
device/frequency changes until the user loads another game. It is at
least possible to toggle the latency dynamically.
2017-07-17 05:11:18 +00:00
|
|
|
frequencyList.onChange([&] { updateDriver(); });
|
2015-06-15 22:26:47 +00:00
|
|
|
|
Update to v103r15 release.
byuu says:
Changelog:
- ruby: rewrote the API interfaces for Video, Audio, Input
- ruby/audio: can now select the number of output channels (not useful
to higan, sorry)
- ruby/asio: various improvements
- tomoko: audio settings panel can now select separate audio devices
(for ASIO, OSS so far)
- tomoko: audio settings panel frequency and latency lists are
dynamically populated now
Note: due to the ruby API rewrite, most drivers will not compile. Right
now, the following work:
- video: Direct3D, XShm
- audio: ASIO, OSS
- input: Windows, SDL, Xlib
It takes a really long time to rewrite these (six hours to do the
above), so it's going to be a while before we're back at 100%
functionality again.
Errata:
- ASIO needs device(), setDevice()
- need to call setDevice() at program startup to populate
frequency/latency settings properly
- changing the device and/or frequency needs to update the emulator
resampler rates
The really hard part is going to be the last one: the only way to change
the emulator frequency is to flush all the audio streams and then
recompute all the coefficients for the resamplers. If this is called
during emulation, all audio streams will be erased and thus no sound
will be output. I'll most likely be forced to simply ignore
device/frequency changes until the user loads another game. It is at
least possible to toggle the latency dynamically.
2017-07-17 05:11:18 +00:00
|
|
|
latencyLabel.setText("Latency:");
|
|
|
|
latencyList.onChange([&] { updateDriver(); });
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
|
2017-07-09 02:23:17 +00:00
|
|
|
exclusiveMode.setText("Exclusive mode");
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
exclusiveMode.setChecked(settings["Audio/Exclusive"].boolean()).onToggle([&] { updateDriver(); });
|
|
|
|
|
|
|
|
effectsLabel.setFont(Font().setBold()).setText("Effects");
|
2015-06-15 22:26:47 +00:00
|
|
|
|
|
|
|
volumeLabel.setText("Volume:");
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
volumeValue.setAlignment(0.5);
|
2016-06-01 11:23:22 +00:00
|
|
|
volumeSlider.setLength(501).setPosition(settings["Audio/Volume"].natural()).onChange([&] { updateEffects(); });
|
2015-06-15 22:26:47 +00:00
|
|
|
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
balanceLabel.setText("Balance:");
|
|
|
|
balanceValue.setAlignment(0.5);
|
|
|
|
balanceSlider.setLength(101).setPosition(settings["Audio/Balance"].natural()).onChange([&] { updateEffects(); });
|
2016-04-18 10:49:45 +00:00
|
|
|
|
Update to v098r13 release.
byuu says:
Changelog:
- nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files
- nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't
cause too many moves with FIFO)
- audio streams now only buffer 20ms; so even if multiple audio streams
desync, latency can never exceed 20ms
- replaced blackman windwed sinc FIR hermite audio filter with transposed
direct form II biquadratic sixth-order IIR butterworth filter (better
attenuation of frequencies above 20KHz, faster, no need for decimation,
less code)
- put in experimental eight-tap echo filter (a lot better than what I
had before, but still rather weak)
- substantial cleanups to the SuperFX GSU processor core (slightly
faster, 479KB->100KB object file, 42.7KB->33.4KB source code size,
way less code duplication)
We'll definitely want to test the whole SuperFX library (not many games)
just to make sure there's no regressions caused by this one.
Not sure what I want to do with audio processing effects yet. I've always
really wanted lots of fun controls to customize audio, and now finally
with this new biquad filter, I can finally start implementing real
effects. For instance, an equalizer wouldn't be too complicated anymore.
The new reverb effect is still a poor man's version. I need to find human
readable source for implementing a comb-filter properly. I'm pretty sure
I can already treat nall::queue as an all-pass filter since all that
does is phase shift (fancy audio term for "delay audio"). What's really
going to be hard is figuring out how to expose user-friendly settings for
controlling it. It looks like you need a bunch of coprime coefficients,
and I don't think casual users are going to be able to hand-enter coprime
values to get the echo effect they want. I uh ... don't even know how
to calculate coprime values dynamically right now >_> But we're going
to have to, as they are correlated to the output sampling rate.
We'll definitely want to make some audio profiles so that users can
quickly select pre-configured themes that sound nice, but expose the
underlying coefficients so that they can tweak stuff to their liking. This
isn't just about higan, this is about me trying to learn digital signal
processing, so please don't be too upset about feature creep or anything
on this.
Anyway ... I'm having some difficulties with my audio right now. When
the reverb effect is enabled, there's a bunch of static on system
reset for just a moment. But this should not be possible. nall::queue
is initializing all previous reverb sample elements to 0.0. I don't
understand where static is coming in from. Further, we have the same
issue with both the windowed sinc and the biquad filters ... a bit of
a popping sound when starting a game. Any help tracking this down would
be appreciated.
There's also one really annoying issue ... I can't seem to do reverb
or volume adjustments with normalized samples. If I say "volume *= 0.5"
in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it
adds a whole bunch of distortion. This makes absolutely zero sense to
me. The sample values are between 0.0 (mute) and 1.0 (full volume) here,
so multiplying a double by 0.5 shouldn't cause distortion. So right now,
I'm doing these adjustments with less precision after denormalizing back
to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
|
|
|
reverbEnable.setText("Reverb").setChecked(settings["Audio/Reverb/Enable"].boolean()).onToggle([&] { updateEffects(); });
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
|
Update to v103r18 release.
byuu says:
Changelog:
- tomoko: improved handling of changing audio devices on the audio
settings panel
- ruby/audio/wasapi: added device enumeration and selection support¹
- ruby/audio/wasapi: release property store handle from audio device
- ruby/audio/wasapi: fix exclusive mode buffer filling
- ruby/video/glx2: ported to new API -- tested and confirmed working
great²
- ruby/video/sdl: fixed initialization -- tested and confirmed working
on FreeBSD now³
- ruby/video/xv: ported to new API -- tested and mostly working great,
sans fullscreen mode⁴
Errata:
- accidentally changed "Driver Settings" label to "Driver" on the
audio settings tab because I deleted the line and forgot the
"Settings" part
- need to use "return initialize();" from setDevice() in the WASAPI
driver, instead of "return true;", so device selection is currently
not functioning in this WIP for said driver
¹: for now, this will likely end up selecting the first available
endpoint device, which is probably wrong. I need to come up with a
system to expose good 'default values' when selecting new audio drivers,
or changing audio device settings.
²: glx2 is a fallback driver for system with only OpenGL 2.0 and no
OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards.
³: although I really should track down why InputManager::poll() is
crashing the emulator when Video::ready() returns false ...
⁴: really bizarrely, when entering fullscreen mode, it looks like the
image was a triangle strip, and the bottom right triange is missing, and
the top left triangle skews the entire image into it. I'm suspecting
this is a Radeon driver bug when trying to create a 2560x1600 X-Video
surface. The glitch persists when exiting fullscreen, too.
If anyone can test the X-Video driver on their Linux/BSD system, it'd be
appreciated. If it's just my video card, I'll ignore it. If not,
hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
|
|
|
updateDevice();
|
Update to v103r16 release.
byuu says:
Changelog:
- emulator/audio: added the ability to change the output frequency at
run-time without emulator reset
- tomoko: display video synchronize option again¹
- tomoko: Settings→Configuration expanded to Settings→{Video,
Audio, Input, Hotkey, Advanced} Settings²
- tomoko: fix default population of audio settings tab
- ruby: Audio::frequency is a double now (to match both
Emulator::Audio and ASIO)³
- tomoko: changing the audio device will repopulate the frequency and
latency lists
- tomoko: changing the audio frequency can now be done in real-time
- ruby/audio/asio: added missing device() information, so devices can
be changed now
- ruby/audio/openal: ported to new API; added device selection support
- ruby/audio/wasapi: ported to new API, but did not test yet (it's
assuredly still broken)⁴
¹: I'm uneasy about this ... but, I guess if people want to disable
audio and just have smooth scrolling video ... so be it. With
Screwtape's documentation, hopefully that'll help people understand that
video synchronization always breaks audio synchronization. I may change
this to a child menu that lets you pick between {no synchronization,
video synchronization, audio synchronization} as a radio selection.
²: given how much more useful the video and audio tabs are now, I
felt that four extra menu items were worth saving a click and going
right to the tab you want. This also matches the behavior of the Tools
menu displaying all tool options and taking you directly to each tab.
This is kind of a hard change to get used to ... but I think it's for
the better.
³: kind of stupid because I've never seen a hardware sound card where
floor(frequency) != frequency, but whatever. Yay consistency.
⁴: I'm going to move it to be event-driven, and try to support 24-bit
sample formats if possible. Who knows which cards that'll fix and which
cards that'll break. I may end up making multiple WASAPI drivers so
people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
|
|
|
updateDriver(true);
|
|
|
|
updateEffects(true);
|
2015-06-15 22:26:47 +00:00
|
|
|
}
|
|
|
|
|
Update to v103r18 release.
byuu says:
Changelog:
- tomoko: improved handling of changing audio devices on the audio
settings panel
- ruby/audio/wasapi: added device enumeration and selection support¹
- ruby/audio/wasapi: release property store handle from audio device
- ruby/audio/wasapi: fix exclusive mode buffer filling
- ruby/video/glx2: ported to new API -- tested and confirmed working
great²
- ruby/video/sdl: fixed initialization -- tested and confirmed working
on FreeBSD now³
- ruby/video/xv: ported to new API -- tested and mostly working great,
sans fullscreen mode⁴
Errata:
- accidentally changed "Driver Settings" label to "Driver" on the
audio settings tab because I deleted the line and forgot the
"Settings" part
- need to use "return initialize();" from setDevice() in the WASAPI
driver, instead of "return true;", so device selection is currently
not functioning in this WIP for said driver
¹: for now, this will likely end up selecting the first available
endpoint device, which is probably wrong. I need to come up with a
system to expose good 'default values' when selecting new audio drivers,
or changing audio device settings.
²: glx2 is a fallback driver for system with only OpenGL 2.0 and no
OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards.
³: although I really should track down why InputManager::poll() is
crashing the emulator when Video::ready() returns false ...
⁴: really bizarrely, when entering fullscreen mode, it looks like the
image was a triangle strip, and the bottom right triange is missing, and
the top left triangle skews the entire image into it. I'm suspecting
this is a Radeon driver bug when trying to create a 2560x1600 X-Video
surface. The glitch persists when exiting fullscreen, too.
If anyone can test the X-Video driver on their Linux/BSD system, it'd be
appreciated. If it's just my video card, I'll ignore it. If not,
hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
|
|
|
auto AudioSettings::updateDevice() -> void {
|
|
|
|
frequencyList.reset();
|
|
|
|
for(auto& frequency : audio->information().frequencies) {
|
|
|
|
frequencyList.append(ComboButtonItem().setText(frequency));
|
|
|
|
if(frequency == settings["Audio/Frequency"].real()) {
|
|
|
|
frequencyList.item(frequencyList.itemCount() - 1).setSelected();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
latencyList.reset();
|
|
|
|
for(auto& latency : audio->information().latencies) {
|
|
|
|
latencyList.append(ComboButtonItem().setText(latency));
|
|
|
|
if(latency == settings["Audio/Latency"].natural()) {
|
|
|
|
latencyList.item(latencyList.itemCount() - 1).setSelected();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Update to v103r16 release.
byuu says:
Changelog:
- emulator/audio: added the ability to change the output frequency at
run-time without emulator reset
- tomoko: display video synchronize option again¹
- tomoko: Settings→Configuration expanded to Settings→{Video,
Audio, Input, Hotkey, Advanced} Settings²
- tomoko: fix default population of audio settings tab
- ruby: Audio::frequency is a double now (to match both
Emulator::Audio and ASIO)³
- tomoko: changing the audio device will repopulate the frequency and
latency lists
- tomoko: changing the audio frequency can now be done in real-time
- ruby/audio/asio: added missing device() information, so devices can
be changed now
- ruby/audio/openal: ported to new API; added device selection support
- ruby/audio/wasapi: ported to new API, but did not test yet (it's
assuredly still broken)⁴
¹: I'm uneasy about this ... but, I guess if people want to disable
audio and just have smooth scrolling video ... so be it. With
Screwtape's documentation, hopefully that'll help people understand that
video synchronization always breaks audio synchronization. I may change
this to a child menu that lets you pick between {no synchronization,
video synchronization, audio synchronization} as a radio selection.
²: given how much more useful the video and audio tabs are now, I
felt that four extra menu items were worth saving a click and going
right to the tab you want. This also matches the behavior of the Tools
menu displaying all tool options and taking you directly to each tab.
This is kind of a hard change to get used to ... but I think it's for
the better.
³: kind of stupid because I've never seen a hardware sound card where
floor(frequency) != frequency, but whatever. Yay consistency.
⁴: I'm going to move it to be event-driven, and try to support 24-bit
sample formats if possible. Who knows which cards that'll fix and which
cards that'll break. I may end up making multiple WASAPI drivers so
people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
|
|
|
auto AudioSettings::updateDriver(bool initializing) -> void {
|
Update to v103r15 release.
byuu says:
Changelog:
- ruby: rewrote the API interfaces for Video, Audio, Input
- ruby/audio: can now select the number of output channels (not useful
to higan, sorry)
- ruby/asio: various improvements
- tomoko: audio settings panel can now select separate audio devices
(for ASIO, OSS so far)
- tomoko: audio settings panel frequency and latency lists are
dynamically populated now
Note: due to the ruby API rewrite, most drivers will not compile. Right
now, the following work:
- video: Direct3D, XShm
- audio: ASIO, OSS
- input: Windows, SDL, Xlib
It takes a really long time to rewrite these (six hours to do the
above), so it's going to be a while before we're back at 100%
functionality again.
Errata:
- ASIO needs device(), setDevice()
- need to call setDevice() at program startup to populate
frequency/latency settings properly
- changing the device and/or frequency needs to update the emulator
resampler rates
The really hard part is going to be the last one: the only way to change
the emulator frequency is to flush all the audio streams and then
recompute all the coefficients for the resamplers. If this is called
during emulation, all audio streams will be erased and thus no sound
will be output. I'll most likely be forced to simply ignore
device/frequency changes until the user loads another game. It is at
least possible to toggle the latency dynamically.
2017-07-17 05:11:18 +00:00
|
|
|
settings["Audio/Device"].setValue(deviceList.selected().text());
|
|
|
|
settings["Audio/Frequency"].setValue(frequencyList.selected().text());
|
|
|
|
settings["Audio/Latency"].setValue(latencyList.selected().text());
|
2016-04-18 10:49:45 +00:00
|
|
|
settings["Audio/Exclusive"].setValue(exclusiveMode.checked());
|
Update to v103r16 release.
byuu says:
Changelog:
- emulator/audio: added the ability to change the output frequency at
run-time without emulator reset
- tomoko: display video synchronize option again¹
- tomoko: Settings→Configuration expanded to Settings→{Video,
Audio, Input, Hotkey, Advanced} Settings²
- tomoko: fix default population of audio settings tab
- ruby: Audio::frequency is a double now (to match both
Emulator::Audio and ASIO)³
- tomoko: changing the audio device will repopulate the frequency and
latency lists
- tomoko: changing the audio frequency can now be done in real-time
- ruby/audio/asio: added missing device() information, so devices can
be changed now
- ruby/audio/openal: ported to new API; added device selection support
- ruby/audio/wasapi: ported to new API, but did not test yet (it's
assuredly still broken)⁴
¹: I'm uneasy about this ... but, I guess if people want to disable
audio and just have smooth scrolling video ... so be it. With
Screwtape's documentation, hopefully that'll help people understand that
video synchronization always breaks audio synchronization. I may change
this to a child menu that lets you pick between {no synchronization,
video synchronization, audio synchronization} as a radio selection.
²: given how much more useful the video and audio tabs are now, I
felt that four extra menu items were worth saving a click and going
right to the tab you want. This also matches the behavior of the Tools
menu displaying all tool options and taking you directly to each tab.
This is kind of a hard change to get used to ... but I think it's for
the better.
³: kind of stupid because I've never seen a hardware sound card where
floor(frequency) != frequency, but whatever. Yay consistency.
⁴: I'm going to move it to be event-driven, and try to support 24-bit
sample formats if possible. Who knows which cards that'll fix and which
cards that'll break. I may end up making multiple WASAPI drivers so
people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
|
|
|
|
|
|
|
if(!initializing) program->updateAudioDriver();
|
2015-06-15 22:26:47 +00:00
|
|
|
}
|
|
|
|
|
Update to v103r16 release.
byuu says:
Changelog:
- emulator/audio: added the ability to change the output frequency at
run-time without emulator reset
- tomoko: display video synchronize option again¹
- tomoko: Settings→Configuration expanded to Settings→{Video,
Audio, Input, Hotkey, Advanced} Settings²
- tomoko: fix default population of audio settings tab
- ruby: Audio::frequency is a double now (to match both
Emulator::Audio and ASIO)³
- tomoko: changing the audio device will repopulate the frequency and
latency lists
- tomoko: changing the audio frequency can now be done in real-time
- ruby/audio/asio: added missing device() information, so devices can
be changed now
- ruby/audio/openal: ported to new API; added device selection support
- ruby/audio/wasapi: ported to new API, but did not test yet (it's
assuredly still broken)⁴
¹: I'm uneasy about this ... but, I guess if people want to disable
audio and just have smooth scrolling video ... so be it. With
Screwtape's documentation, hopefully that'll help people understand that
video synchronization always breaks audio synchronization. I may change
this to a child menu that lets you pick between {no synchronization,
video synchronization, audio synchronization} as a radio selection.
²: given how much more useful the video and audio tabs are now, I
felt that four extra menu items were worth saving a click and going
right to the tab you want. This also matches the behavior of the Tools
menu displaying all tool options and taking you directly to each tab.
This is kind of a hard change to get used to ... but I think it's for
the better.
³: kind of stupid because I've never seen a hardware sound card where
floor(frequency) != frequency, but whatever. Yay consistency.
⁴: I'm going to move it to be event-driven, and try to support 24-bit
sample formats if possible. Who knows which cards that'll fix and which
cards that'll break. I may end up making multiple WASAPI drivers so
people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
|
|
|
auto AudioSettings::updateEffects(bool initializing) -> void {
|
2015-11-16 08:38:05 +00:00
|
|
|
settings["Audio/Volume"].setValue(volumeSlider.position());
|
|
|
|
volumeValue.setText({volumeSlider.position(), "%"});
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
|
|
|
|
settings["Audio/Balance"].setValue(balanceSlider.position());
|
|
|
|
balanceValue.setText({balanceSlider.position(), "%"});
|
|
|
|
|
Update to v098r13 release.
byuu says:
Changelog:
- nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files
- nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't
cause too many moves with FIFO)
- audio streams now only buffer 20ms; so even if multiple audio streams
desync, latency can never exceed 20ms
- replaced blackman windwed sinc FIR hermite audio filter with transposed
direct form II biquadratic sixth-order IIR butterworth filter (better
attenuation of frequencies above 20KHz, faster, no need for decimation,
less code)
- put in experimental eight-tap echo filter (a lot better than what I
had before, but still rather weak)
- substantial cleanups to the SuperFX GSU processor core (slightly
faster, 479KB->100KB object file, 42.7KB->33.4KB source code size,
way less code duplication)
We'll definitely want to test the whole SuperFX library (not many games)
just to make sure there's no regressions caused by this one.
Not sure what I want to do with audio processing effects yet. I've always
really wanted lots of fun controls to customize audio, and now finally
with this new biquad filter, I can finally start implementing real
effects. For instance, an equalizer wouldn't be too complicated anymore.
The new reverb effect is still a poor man's version. I need to find human
readable source for implementing a comb-filter properly. I'm pretty sure
I can already treat nall::queue as an all-pass filter since all that
does is phase shift (fancy audio term for "delay audio"). What's really
going to be hard is figuring out how to expose user-friendly settings for
controlling it. It looks like you need a bunch of coprime coefficients,
and I don't think casual users are going to be able to hand-enter coprime
values to get the echo effect they want. I uh ... don't even know how
to calculate coprime values dynamically right now >_> But we're going
to have to, as they are correlated to the output sampling rate.
We'll definitely want to make some audio profiles so that users can
quickly select pre-configured themes that sound nice, but expose the
underlying coefficients so that they can tweak stuff to their liking. This
isn't just about higan, this is about me trying to learn digital signal
processing, so please don't be too upset about feature creep or anything
on this.
Anyway ... I'm having some difficulties with my audio right now. When
the reverb effect is enabled, there's a bunch of static on system
reset for just a moment. But this should not be possible. nall::queue
is initializing all previous reverb sample elements to 0.0. I don't
understand where static is coming in from. Further, we have the same
issue with both the windowed sinc and the biquad filters ... a bit of
a popping sound when starting a game. Any help tracking this down would
be appreciated.
There's also one really annoying issue ... I can't seem to do reverb
or volume adjustments with normalized samples. If I say "volume *= 0.5"
in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it
adds a whole bunch of distortion. This makes absolutely zero sense to
me. The sample values are between 0.0 (mute) and 1.0 (full volume) here,
so multiplying a double by 0.5 shouldn't cause distortion. So right now,
I'm doing these adjustments with less precision after denormalizing back
to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
|
|
|
settings["Audio/Reverb/Enable"].setValue(reverbEnable.checked());
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
|
Update to v103r16 release.
byuu says:
Changelog:
- emulator/audio: added the ability to change the output frequency at
run-time without emulator reset
- tomoko: display video synchronize option again¹
- tomoko: Settings→Configuration expanded to Settings→{Video,
Audio, Input, Hotkey, Advanced} Settings²
- tomoko: fix default population of audio settings tab
- ruby: Audio::frequency is a double now (to match both
Emulator::Audio and ASIO)³
- tomoko: changing the audio device will repopulate the frequency and
latency lists
- tomoko: changing the audio frequency can now be done in real-time
- ruby/audio/asio: added missing device() information, so devices can
be changed now
- ruby/audio/openal: ported to new API; added device selection support
- ruby/audio/wasapi: ported to new API, but did not test yet (it's
assuredly still broken)⁴
¹: I'm uneasy about this ... but, I guess if people want to disable
audio and just have smooth scrolling video ... so be it. With
Screwtape's documentation, hopefully that'll help people understand that
video synchronization always breaks audio synchronization. I may change
this to a child menu that lets you pick between {no synchronization,
video synchronization, audio synchronization} as a radio selection.
²: given how much more useful the video and audio tabs are now, I
felt that four extra menu items were worth saving a click and going
right to the tab you want. This also matches the behavior of the Tools
menu displaying all tool options and taking you directly to each tab.
This is kind of a hard change to get used to ... but I think it's for
the better.
³: kind of stupid because I've never seen a hardware sound card where
floor(frequency) != frequency, but whatever. Yay consistency.
⁴: I'm going to move it to be event-driven, and try to support 24-bit
sample formats if possible. Who knows which cards that'll fix and which
cards that'll break. I may end up making multiple WASAPI drivers so
people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
|
|
|
if(!initializing) program->updateAudioEffects();
|
|
|
|
}
|