bsnes/higan/target-tomoko/settings/audio.cpp

91 lines
3.3 KiB
C++
Raw Normal View History

Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
AudioSettings::AudioSettings(TabFrame* parent) : TabFrameItem(parent) {
setIcon(Icon::Device::Speaker);
Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
setText("Audio");
layout.setMargin(5);
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
driverLabel.setFont(Font().setBold()).setText("Driver Settings");
deviceLabel.setText("Device:");
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
deviceList.onChange([&] { updateDriver(); updateDriverLists(); });
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
frequencyLabel.setText("Frequency:");
frequencyList.onChange([&] { updateDriver(); });
latencyLabel.setText("Latency:");
latencyList.onChange([&] { updateDriver(); });
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
exclusiveMode.setText("Exclusive mode");
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
exclusiveMode.setChecked(settings["Audio/Exclusive"].boolean()).onToggle([&] { updateDriver(); });
effectsLabel.setFont(Font().setBold()).setText("Effects");
volumeLabel.setText("Volume:");
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
volumeValue.setAlignment(0.5);
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
volumeSlider.setLength(501).setPosition(settings["Audio/Volume"].natural()).onChange([&] { updateEffects(); });
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
balanceLabel.setText("Balance:");
balanceValue.setAlignment(0.5);
balanceSlider.setLength(101).setPosition(settings["Audio/Balance"].natural()).onChange([&] { updateEffects(); });
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
reverbEnable.setText("Reverb").setChecked(settings["Audio/Reverb/Enable"].boolean()).onToggle([&] { updateEffects(); });
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
updateDriverLists();
updateDriver(true);
updateEffects(true);
}
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
//when changing audio drivers, device/frequency/latency values may no longer be valid for new driver
//updateDriverLists() will try to select a match if one is found
//otherwise, this function will force now-invalid settings to the first setting in each list
auto AudioSettings::updateDriver(bool initializing) -> void {
settings["Audio/Device"].setValue(deviceList.selected().text());
settings["Audio/Frequency"].setValue(frequencyList.selected().text());
settings["Audio/Latency"].setValue(latencyList.selected().text());
settings["Audio/Exclusive"].setValue(exclusiveMode.checked());
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
if(!initializing) program->updateAudioDriver();
}
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
auto AudioSettings::updateEffects(bool initializing) -> void {
settings["Audio/Volume"].setValue(volumeSlider.position());
volumeValue.setText({volumeSlider.position(), "%"});
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
settings["Audio/Balance"].setValue(balanceSlider.position());
balanceValue.setText({balanceSlider.position(), "%"});
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
settings["Audio/Reverb/Enable"].setValue(reverbEnable.checked());
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
if(!initializing) program->updateAudioEffects();
}
//called during initialization, and after changing audio device
//each audio device may have separately supported frequencies and/or latencies
auto AudioSettings::updateDriverLists() -> void {
auto information = audio->information();
deviceList.reset();
for(auto& device : information.devices) {
deviceList.append(ComboButtonItem().setText(device));
if(device == settings["Audio/Device"].text()) {
deviceList.item(deviceList.itemCount() - 1).setSelected();
}
}
frequencyList.reset();
for(auto& frequency : information.frequencies) {
frequencyList.append(ComboButtonItem().setText(frequency));
if(frequency == settings["Audio/Frequency"].real()) {
frequencyList.item(frequencyList.itemCount() - 1).setSelected();
}
}
latencyList.reset();
for(auto& latency : information.latencies) {
latencyList.append(ComboButtonItem().setText(latency));
if(latency == settings["Audio/Latency"].natural()) {
latencyList.item(latencyList.itemCount() - 1).setSelected();
}
}
Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
}