bsnes/higan/target-tomoko/presentation/presentation.cpp

295 lines
12 KiB
C++
Raw Normal View History

#include "../tomoko.hpp"
unique_pointer<Presentation> presentation;
Presentation::Presentation() {
presentation = this;
libraryMenu.setText("Library");
for(auto& emulator : program->emulators) {
Update to v099r08 release. byuu says: Changelog: - nall/vfs work 100% completed; even SGB games load now - emulation cores now call load() for the base cartridges as well - updated port/device handling; portmask is gone; device ID bug should be resolved now - SNES controller port 1 multitap option was removed - added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp VRAM::size=0x10000; to enable) Overall, nall/vfs was a huge success!! We've substantially reduced the amount of boilerplate code everywhere, while still allowing (even easier than before) support for RAM-based game loading/saving. All of nall/stream is dead and buried. I am considering removing Emulator::Interface::Medium::id and/or bootable flag. Or at least, doing something different with it. The values for the non-bootable GB/BS/ST entries duplicate the ID that is supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use this as the hardware revision selection ID, and then gut non-bootable options. There's really no reason for that to be there. I think at one point I was using it to generate library tabs for non-bootable systems, but we don't do that anymore anyway. Emulator::Interface::load() may not need the required flag anymore ... it doesn't really do anything right now anyway. I have a few reasons for having the cores load the base cartridge. Most importantly, it is going to enable a special mode for the WonderSwan / WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's possible to boot these systems with no games inserted to set user profile information and such. There are also other systems that may accept being booted without a cartridge. To reach this state, you would load a game and then cancel the load dialog. Right now, this results in games not loading. The second reason is this prevents nasty crashes when loading fails. So if you're missing a required manifest, the emulator won't die a violent death anymore. It's able to back out at any point. The third reason is consistency: loading the base cartridge works the same as the slot cartridges. The fourth reason is Emulator::Interface::open(uint pathID) values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This complicated things because you had to pass the correct ID. But now instead, Emulator::Interface::load() returns maybe<uint> that is nothing when no game is selected, and a pathID for a valid game. And now open() can take this ID to access this game's folder contents. The downside, which is temporary, is that command-line loading is currently broken. But I do intend on restoring it. In fact, I want to do better than before and allow multi-cart booting from the command-line by specifying the base cartridge and then slot cartridges. The idea should be pretty simple: keep a queue of pending filenames that we fill from the command-line and/or drag-and-drop operations on the main window, and then empty out the queue or prompt for load dialogs from the UI when booting a system. This also might be a bit more unorthodox compared to the traditional emulator design of "loadGame(filename)", but ... oh well. It's easy enough still. The port/device changes are fun. We simplified things quite a bit. The portmask stuff is gone entirely. While ports and devices keep IDs, this is really just sugar-coating so UIs can use for(auto& port : emulator->ports) and access port.id; rather than having to use for(auto n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... }; but they should otherwise generally be identical to the order they appear in their respective ranges. Still, don't rely on that. Input::id is gone. There was no point since we also got rid of the nasty Input::order vector. Since I was in here, I went ahead and caved on the pedantics and renamed Input::guid to Input::userData. I removed the SNES controller port 1 multitap option. Basically, the only game that uses this is N-warp Daisakusen and, no offense to d4s, it's not really a good game anyway. It's just a quick demo to show 8-players on the SNES. But in the UI, all it does is confuse people into wasting time mapping a controller they're never going to use, and they're going to wonder which port to use. If more compelling use cases for 8-players comes about, we can reconsider this. I left all the code to support this in place, so all you have to do is uncomment one line to enable it again. We now have dsnes emulation! :D If you change PPU::VRAM::size to 0x10000 (words), then you should now have 128KiB of VRAM. Even better, it serializes the used-VRAM size, so your save states shouldn't crash on you if you swap between the two (though if you try this, you're nuts.) Note that this option does break commercial software. Yoshi's Island in particular. This game is setting A15 on some PPU register writes, but not on others. The end result of this is things break horribly in-game. Also, this option is causing a very tiny speed hit for obvious reasons with the variable masking value (I'm even using size-1 for now.) Given how niche this is, I may just leave it a compile-time constant to avoid the overhead cost. Otherwise, if we keep the option, then it'll go into Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future. ---- Finally, some fun for my OCD ... my monitor suddenly cut out on me in the middle of working on this WIP, about six hours in of non-stop work. Had to hit a bunch of ctrl+alt+fN commands (among other things) and trying to log in headless on another TTY to do issue commands, trying to recover the display. Finally power cycled the monitor and it came back up. So all my typing ended up going to who knows where. Usually this sort of thing terrifies me enough that I scrap a WIP and start over to ensure I didn't screw anything up during the crashed screen when hitting keys randomly. Obviously, everything compiles and appears to work fine. And I know it's extremely paranoid, but OCD isn't logical, so ... I'm going to go over every line of the 100KiB r07->r08 diff looking for any corruption/errors/whatever. ---- Review finished. r08 diff review notes: - fc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - gb/cartridge/cartridge.hpp: remove redundant uint _pathID; (in Information::pathID already) - gb/cartridge/cartridge.hpp: pull sha256 inside Information - sfc/cartridge/load/cpp: add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more descriptive - sfc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - sfc/interface/interface.cpp: remove n variable from the Multitap device input generation loop (now unused) - sfc/interface/interface.hpp: put struct Port above struct Device like the other classes - ui-tomoko: cheats.bml is reading from/writing to mediumPaths(0) [system folder instead of game folder] - ui-tomoko: instead of mediumPaths(1) - call emulator->metadataPathID() or something like that
2016-06-24 12:16:53 +00:00
for(auto& medium : emulator->media) {
auto item = new MenuItem{&libraryMenu};
Update to v099r08 release. byuu says: Changelog: - nall/vfs work 100% completed; even SGB games load now - emulation cores now call load() for the base cartridges as well - updated port/device handling; portmask is gone; device ID bug should be resolved now - SNES controller port 1 multitap option was removed - added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp VRAM::size=0x10000; to enable) Overall, nall/vfs was a huge success!! We've substantially reduced the amount of boilerplate code everywhere, while still allowing (even easier than before) support for RAM-based game loading/saving. All of nall/stream is dead and buried. I am considering removing Emulator::Interface::Medium::id and/or bootable flag. Or at least, doing something different with it. The values for the non-bootable GB/BS/ST entries duplicate the ID that is supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use this as the hardware revision selection ID, and then gut non-bootable options. There's really no reason for that to be there. I think at one point I was using it to generate library tabs for non-bootable systems, but we don't do that anymore anyway. Emulator::Interface::load() may not need the required flag anymore ... it doesn't really do anything right now anyway. I have a few reasons for having the cores load the base cartridge. Most importantly, it is going to enable a special mode for the WonderSwan / WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's possible to boot these systems with no games inserted to set user profile information and such. There are also other systems that may accept being booted without a cartridge. To reach this state, you would load a game and then cancel the load dialog. Right now, this results in games not loading. The second reason is this prevents nasty crashes when loading fails. So if you're missing a required manifest, the emulator won't die a violent death anymore. It's able to back out at any point. The third reason is consistency: loading the base cartridge works the same as the slot cartridges. The fourth reason is Emulator::Interface::open(uint pathID) values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This complicated things because you had to pass the correct ID. But now instead, Emulator::Interface::load() returns maybe<uint> that is nothing when no game is selected, and a pathID for a valid game. And now open() can take this ID to access this game's folder contents. The downside, which is temporary, is that command-line loading is currently broken. But I do intend on restoring it. In fact, I want to do better than before and allow multi-cart booting from the command-line by specifying the base cartridge and then slot cartridges. The idea should be pretty simple: keep a queue of pending filenames that we fill from the command-line and/or drag-and-drop operations on the main window, and then empty out the queue or prompt for load dialogs from the UI when booting a system. This also might be a bit more unorthodox compared to the traditional emulator design of "loadGame(filename)", but ... oh well. It's easy enough still. The port/device changes are fun. We simplified things quite a bit. The portmask stuff is gone entirely. While ports and devices keep IDs, this is really just sugar-coating so UIs can use for(auto& port : emulator->ports) and access port.id; rather than having to use for(auto n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... }; but they should otherwise generally be identical to the order they appear in their respective ranges. Still, don't rely on that. Input::id is gone. There was no point since we also got rid of the nasty Input::order vector. Since I was in here, I went ahead and caved on the pedantics and renamed Input::guid to Input::userData. I removed the SNES controller port 1 multitap option. Basically, the only game that uses this is N-warp Daisakusen and, no offense to d4s, it's not really a good game anyway. It's just a quick demo to show 8-players on the SNES. But in the UI, all it does is confuse people into wasting time mapping a controller they're never going to use, and they're going to wonder which port to use. If more compelling use cases for 8-players comes about, we can reconsider this. I left all the code to support this in place, so all you have to do is uncomment one line to enable it again. We now have dsnes emulation! :D If you change PPU::VRAM::size to 0x10000 (words), then you should now have 128KiB of VRAM. Even better, it serializes the used-VRAM size, so your save states shouldn't crash on you if you swap between the two (though if you try this, you're nuts.) Note that this option does break commercial software. Yoshi's Island in particular. This game is setting A15 on some PPU register writes, but not on others. The end result of this is things break horribly in-game. Also, this option is causing a very tiny speed hit for obvious reasons with the variable masking value (I'm even using size-1 for now.) Given how niche this is, I may just leave it a compile-time constant to avoid the overhead cost. Otherwise, if we keep the option, then it'll go into Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future. ---- Finally, some fun for my OCD ... my monitor suddenly cut out on me in the middle of working on this WIP, about six hours in of non-stop work. Had to hit a bunch of ctrl+alt+fN commands (among other things) and trying to log in headless on another TTY to do issue commands, trying to recover the display. Finally power cycled the monitor and it came back up. So all my typing ended up going to who knows where. Usually this sort of thing terrifies me enough that I scrap a WIP and start over to ensure I didn't screw anything up during the crashed screen when hitting keys randomly. Obviously, everything compiles and appears to work fine. And I know it's extremely paranoid, but OCD isn't logical, so ... I'm going to go over every line of the 100KiB r07->r08 diff looking for any corruption/errors/whatever. ---- Review finished. r08 diff review notes: - fc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - gb/cartridge/cartridge.hpp: remove redundant uint _pathID; (in Information::pathID already) - gb/cartridge/cartridge.hpp: pull sha256 inside Information - sfc/cartridge/load/cpp: add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more descriptive - sfc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - sfc/interface/interface.cpp: remove n variable from the Multitap device input generation loop (now unused) - sfc/interface/interface.hpp: put struct Port above struct Device like the other classes - ui-tomoko: cheats.bml is reading from/writing to mediumPaths(0) [system folder instead of game folder] - ui-tomoko: instead of mediumPaths(1) - call emulator->metadataPathID() or something like that
2016-06-24 12:16:53 +00:00
item->setText({medium.name, " ..."}).onActivate([=] {
program->loadMedium(*emulator, medium);
});
loadBootableMedia.append(item);
}
}
Update to v096r06 release. byuu says: This WIP finally achieves the vision I've had for icarus. I also fixed a mapping issue with Cx4 that, oddly enough, only caused the "2" from the Mega Man X2 title screen to disappear. [Editor's note - "the vision for icarus" was described in a separate, public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584 Quoting for posterity: icarus is now a full-fledged part of higan, and will be bundled with each higan WIP as well. This will ensure that in the future, the exact version of icarus you need to run higan will be included right along with it. As of this WIP, physical manifest files are now truly and entirely optional. From now on, you can associate your ROM image files with higan's main binary, or drop them directly on top of it, to load and play your games. Furthermore, there are two new menu options that appear under the library menu when icarus is present: - "Load ROM File ..." => gives you a single-file selection dialog to import (and if possible) run the game - "Import ROM Files ..." => gives you a multi-file import dialog with checkboxes to pull in multiple games at once Finally, as before, icarus can generate manifest.bml files for folders that lack them. For people who like the game folder and library system, nothing's changed. Keep using higan as you have been. For people who hate it, you can now use higan like your classic emulators. Treat the "Library->{System Name}" entries as your "favorites" list: the games you actually play. Treat the "Library->Load ROM" as your standard open file dialog in other emulators. And finally, treat "Advanced->Game Library" as your save data path for cheat codes, save states, save RAM, etc. ]
2016-01-13 10:47:45 +00:00
//add icarus menu options -- but only if icarus binary is present
if(execute("icarus", "--name").output.strip() == "icarus") {
Update to v096r06 release. byuu says: This WIP finally achieves the vision I've had for icarus. I also fixed a mapping issue with Cx4 that, oddly enough, only caused the "2" from the Mega Man X2 title screen to disappear. [Editor's note - "the vision for icarus" was described in a separate, public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584 Quoting for posterity: icarus is now a full-fledged part of higan, and will be bundled with each higan WIP as well. This will ensure that in the future, the exact version of icarus you need to run higan will be included right along with it. As of this WIP, physical manifest files are now truly and entirely optional. From now on, you can associate your ROM image files with higan's main binary, or drop them directly on top of it, to load and play your games. Furthermore, there are two new menu options that appear under the library menu when icarus is present: - "Load ROM File ..." => gives you a single-file selection dialog to import (and if possible) run the game - "Import ROM Files ..." => gives you a multi-file import dialog with checkboxes to pull in multiple games at once Finally, as before, icarus can generate manifest.bml files for folders that lack them. For people who like the game folder and library system, nothing's changed. Keep using higan as you have been. For people who hate it, you can now use higan like your classic emulators. Treat the "Library->{System Name}" entries as your "favorites" list: the games you actually play. Treat the "Library->Load ROM" as your standard open file dialog in other emulators. And finally, treat "Advanced->Game Library" as your save data path for cheat codes, save states, save RAM, etc. ]
2016-01-13 10:47:45 +00:00
libraryMenu.append(MenuSeparator());
Update to v099r13 release. byuu says: Changelog: - GB core code cleanup completed - GBA core code cleanup completed - some more cleanup on missed processor/arm functions/variables - fixed FC loading icarus bug - "Load ROM File" icarus functionality restored - minor code unification efforts all around (not perfect yet) - MMIO->IO - mmio.cpp->io.cpp - read,write->readIO,writeIO It's been a very long work in progress ... starting all the way back with v094r09, but the major part of the higan code cleanup is now completed! Of course, it's very important to note that this is only for the basic style: - under_score functions and variables are now camelCase - return-type function-name() are now auto function-name() -> return-type - Natural<T>/Integer<T> replace (u)intT_n types where possible - signed/unsigned are now int/uint - most of the x==true,x==false tests changed to x,!x A lot of spot improvements to consistency, simplicity and quality have gone in along the way, of course. But we'll probably never fully finishing beautifying every last line of code in the entire codebase. Still, this is a really great start. Going forward, WIP diffs should start being smaller and of higher quality once again. I know the joke is, "until my coding style changes again", but ... this was way too stressful, way too time consuming, and way too risky. I'm too old and tired now for extreme upheavel like this again. The only major change I'm slowly mulling over would be renaming the using Natural<T>/Integer<T> = (u)intT; shorthand to something that isn't as easily confused with the (u)int_t types ... but we'll see. I'll definitely continue to change small things all the time, but for the larger picture, I need to just accept the style I have and live with it.
2016-06-29 11:10:28 +00:00
libraryMenu.append(MenuItem().setText("Load ROM File ...").onActivate([&] {
Update to v096r06 release. byuu says: This WIP finally achieves the vision I've had for icarus. I also fixed a mapping issue with Cx4 that, oddly enough, only caused the "2" from the Mega Man X2 title screen to disappear. [Editor's note - "the vision for icarus" was described in a separate, public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584 Quoting for posterity: icarus is now a full-fledged part of higan, and will be bundled with each higan WIP as well. This will ensure that in the future, the exact version of icarus you need to run higan will be included right along with it. As of this WIP, physical manifest files are now truly and entirely optional. From now on, you can associate your ROM image files with higan's main binary, or drop them directly on top of it, to load and play your games. Furthermore, there are two new menu options that appear under the library menu when icarus is present: - "Load ROM File ..." => gives you a single-file selection dialog to import (and if possible) run the game - "Import ROM Files ..." => gives you a multi-file import dialog with checkboxes to pull in multiple games at once Finally, as before, icarus can generate manifest.bml files for folders that lack them. For people who like the game folder and library system, nothing's changed. Keep using higan as you have been. For people who hate it, you can now use higan like your classic emulators. Treat the "Library->{System Name}" entries as your "favorites" list: the games you actually play. Treat the "Library->Load ROM" as your standard open file dialog in other emulators. And finally, treat "Advanced->Game Library" as your save data path for cheat codes, save states, save RAM, etc. ]
2016-01-13 10:47:45 +00:00
audio->clear();
if(auto location = execute("icarus", "--import")) {
Update to v099r13 release. byuu says: Changelog: - GB core code cleanup completed - GBA core code cleanup completed - some more cleanup on missed processor/arm functions/variables - fixed FC loading icarus bug - "Load ROM File" icarus functionality restored - minor code unification efforts all around (not perfect yet) - MMIO->IO - mmio.cpp->io.cpp - read,write->readIO,writeIO It's been a very long work in progress ... starting all the way back with v094r09, but the major part of the higan code cleanup is now completed! Of course, it's very important to note that this is only for the basic style: - under_score functions and variables are now camelCase - return-type function-name() are now auto function-name() -> return-type - Natural<T>/Integer<T> replace (u)intT_n types where possible - signed/unsigned are now int/uint - most of the x==true,x==false tests changed to x,!x A lot of spot improvements to consistency, simplicity and quality have gone in along the way, of course. But we'll probably never fully finishing beautifying every last line of code in the entire codebase. Still, this is a really great start. Going forward, WIP diffs should start being smaller and of higher quality once again. I know the joke is, "until my coding style changes again", but ... this was way too stressful, way too time consuming, and way too risky. I'm too old and tired now for extreme upheavel like this again. The only major change I'm slowly mulling over would be renaming the using Natural<T>/Integer<T> = (u)intT; shorthand to something that isn't as easily confused with the (u)int_t types ... but we'll see. I'll definitely continue to change small things all the time, but for the larger picture, I need to just accept the style I have and live with it.
2016-06-29 11:10:28 +00:00
program->mediumQueue.append(location.output.strip());
program->loadMedium();
Update to v096r06 release. byuu says: This WIP finally achieves the vision I've had for icarus. I also fixed a mapping issue with Cx4 that, oddly enough, only caused the "2" from the Mega Man X2 title screen to disappear. [Editor's note - "the vision for icarus" was described in a separate, public forum post: http://board.byuu.org/phpbb3/viewtopic.php?p=20584 Quoting for posterity: icarus is now a full-fledged part of higan, and will be bundled with each higan WIP as well. This will ensure that in the future, the exact version of icarus you need to run higan will be included right along with it. As of this WIP, physical manifest files are now truly and entirely optional. From now on, you can associate your ROM image files with higan's main binary, or drop them directly on top of it, to load and play your games. Furthermore, there are two new menu options that appear under the library menu when icarus is present: - "Load ROM File ..." => gives you a single-file selection dialog to import (and if possible) run the game - "Import ROM Files ..." => gives you a multi-file import dialog with checkboxes to pull in multiple games at once Finally, as before, icarus can generate manifest.bml files for folders that lack them. For people who like the game folder and library system, nothing's changed. Keep using higan as you have been. For people who hate it, you can now use higan like your classic emulators. Treat the "Library->{System Name}" entries as your "favorites" list: the games you actually play. Treat the "Library->Load ROM" as your standard open file dialog in other emulators. And finally, treat "Advanced->Game Library" as your save data path for cheat codes, save states, save RAM, etc. ]
2016-01-13 10:47:45 +00:00
}
}));
libraryMenu.append(MenuItem().setText("Import ROM Files ...").onActivate([&] {
invoke("icarus");
}));
}
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
systemMenu.setText("System").setVisible(false);
powerSystem.setText("Power").onActivate([&] { program->powerCycle(); });
resetSystem.setText("Reset").onActivate([&] { program->softReset(); });
Update to v099r08 release. byuu says: Changelog: - nall/vfs work 100% completed; even SGB games load now - emulation cores now call load() for the base cartridges as well - updated port/device handling; portmask is gone; device ID bug should be resolved now - SNES controller port 1 multitap option was removed - added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp VRAM::size=0x10000; to enable) Overall, nall/vfs was a huge success!! We've substantially reduced the amount of boilerplate code everywhere, while still allowing (even easier than before) support for RAM-based game loading/saving. All of nall/stream is dead and buried. I am considering removing Emulator::Interface::Medium::id and/or bootable flag. Or at least, doing something different with it. The values for the non-bootable GB/BS/ST entries duplicate the ID that is supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use this as the hardware revision selection ID, and then gut non-bootable options. There's really no reason for that to be there. I think at one point I was using it to generate library tabs for non-bootable systems, but we don't do that anymore anyway. Emulator::Interface::load() may not need the required flag anymore ... it doesn't really do anything right now anyway. I have a few reasons for having the cores load the base cartridge. Most importantly, it is going to enable a special mode for the WonderSwan / WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's possible to boot these systems with no games inserted to set user profile information and such. There are also other systems that may accept being booted without a cartridge. To reach this state, you would load a game and then cancel the load dialog. Right now, this results in games not loading. The second reason is this prevents nasty crashes when loading fails. So if you're missing a required manifest, the emulator won't die a violent death anymore. It's able to back out at any point. The third reason is consistency: loading the base cartridge works the same as the slot cartridges. The fourth reason is Emulator::Interface::open(uint pathID) values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This complicated things because you had to pass the correct ID. But now instead, Emulator::Interface::load() returns maybe<uint> that is nothing when no game is selected, and a pathID for a valid game. And now open() can take this ID to access this game's folder contents. The downside, which is temporary, is that command-line loading is currently broken. But I do intend on restoring it. In fact, I want to do better than before and allow multi-cart booting from the command-line by specifying the base cartridge and then slot cartridges. The idea should be pretty simple: keep a queue of pending filenames that we fill from the command-line and/or drag-and-drop operations on the main window, and then empty out the queue or prompt for load dialogs from the UI when booting a system. This also might be a bit more unorthodox compared to the traditional emulator design of "loadGame(filename)", but ... oh well. It's easy enough still. The port/device changes are fun. We simplified things quite a bit. The portmask stuff is gone entirely. While ports and devices keep IDs, this is really just sugar-coating so UIs can use for(auto& port : emulator->ports) and access port.id; rather than having to use for(auto n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... }; but they should otherwise generally be identical to the order they appear in their respective ranges. Still, don't rely on that. Input::id is gone. There was no point since we also got rid of the nasty Input::order vector. Since I was in here, I went ahead and caved on the pedantics and renamed Input::guid to Input::userData. I removed the SNES controller port 1 multitap option. Basically, the only game that uses this is N-warp Daisakusen and, no offense to d4s, it's not really a good game anyway. It's just a quick demo to show 8-players on the SNES. But in the UI, all it does is confuse people into wasting time mapping a controller they're never going to use, and they're going to wonder which port to use. If more compelling use cases for 8-players comes about, we can reconsider this. I left all the code to support this in place, so all you have to do is uncomment one line to enable it again. We now have dsnes emulation! :D If you change PPU::VRAM::size to 0x10000 (words), then you should now have 128KiB of VRAM. Even better, it serializes the used-VRAM size, so your save states shouldn't crash on you if you swap between the two (though if you try this, you're nuts.) Note that this option does break commercial software. Yoshi's Island in particular. This game is setting A15 on some PPU register writes, but not on others. The end result of this is things break horribly in-game. Also, this option is causing a very tiny speed hit for obvious reasons with the variable masking value (I'm even using size-1 for now.) Given how niche this is, I may just leave it a compile-time constant to avoid the overhead cost. Otherwise, if we keep the option, then it'll go into Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future. ---- Finally, some fun for my OCD ... my monitor suddenly cut out on me in the middle of working on this WIP, about six hours in of non-stop work. Had to hit a bunch of ctrl+alt+fN commands (among other things) and trying to log in headless on another TTY to do issue commands, trying to recover the display. Finally power cycled the monitor and it came back up. So all my typing ended up going to who knows where. Usually this sort of thing terrifies me enough that I scrap a WIP and start over to ensure I didn't screw anything up during the crashed screen when hitting keys randomly. Obviously, everything compiles and appears to work fine. And I know it's extremely paranoid, but OCD isn't logical, so ... I'm going to go over every line of the 100KiB r07->r08 diff looking for any corruption/errors/whatever. ---- Review finished. r08 diff review notes: - fc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - gb/cartridge/cartridge.hpp: remove redundant uint _pathID; (in Information::pathID already) - gb/cartridge/cartridge.hpp: pull sha256 inside Information - sfc/cartridge/load/cpp: add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more descriptive - sfc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - sfc/interface/interface.cpp: remove n variable from the Multitap device input generation loop (now unused) - sfc/interface/interface.hpp: put struct Port above struct Device like the other classes - ui-tomoko: cheats.bml is reading from/writing to mediumPaths(0) [system folder instead of game folder] - ui-tomoko: instead of mediumPaths(1) - call emulator->metadataPathID() or something like that
2016-06-24 12:16:53 +00:00
unloadSystem.setText("Unload").onActivate([&] { program->unloadMedium(); });
settingsMenu.setText("Settings");
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
videoScaleMenu.setText("Video Scale");
if(settings["Video/Scale"].text() == "Small") videoScaleSmall.setChecked();
if(settings["Video/Scale"].text() == "Medium") videoScaleMedium.setChecked();
if(settings["Video/Scale"].text() == "Large") videoScaleLarge.setChecked();
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
videoScaleSmall.setText("Small").onActivate([&] {
settings["Video/Scale"].setValue("Small");
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
resizeViewport();
});
videoScaleMedium.setText("Medium").onActivate([&] {
settings["Video/Scale"].setValue("Medium");
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
resizeViewport();
});
videoScaleLarge.setText("Large").onActivate([&] {
settings["Video/Scale"].setValue("Large");
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
resizeViewport();
});
aspectCorrection.setText("Aspect Correction").setChecked(settings["Video/AspectCorrection"].boolean()).onToggle([&] {
settings["Video/AspectCorrection"].setValue(aspectCorrection.checked());
resizeViewport();
});
videoEmulationMenu.setText("Video Emulation");
blurEmulation.setText("Blurring").setChecked(settings["Video/BlurEmulation"].boolean()).onToggle([&] {
Update to v096r07 release. byuu says: Changelog: - configuration files are now stored in localpath() instead of configpath() - Video gamma/saturation/luminance sliders are gone now, sorry - added Video Filter->Blur Emulation [1] - added Video Filter->Scanline Emulation [2] - improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn] [1] For the Famicom, this does nothing. For the Super Famicom, this performs horizontal blending for proper pseudo-hires translucency. For the Game Boy, Game Boy Color, and Game Boy Advance, this performs interframe blending (each frame is the average of the current and previous frame), which is important for things like the GBVideoPlayer. [2] Right now, this only applies to the Super Famicom, but it'll come to the Famicom in the future. For the Super Famicom, this option doesn't just add scanlines, it simulates the phosphor decay that's visible in interlace mode. If you observe an interlaced game like RPM Racing on a real SNES, you'll notice that even on perfectly still screens, the image appears to shake. This option emulates that effect. Note 1: the buffering right now is a little sub-optimal, so there will be a slight speed hit with this new support. Since the core is now generating native ARGB8888 colors, it might as well call out to the interface to lock/unlock/refresh the video, that way it can render directly to the screen. Although ... that might not be such a hot idea, since the GBx interframe blending reads from the target buffer, and that tends to be a catastrophic option for performance. Note 2: the balanced and performance profiles for the SNES are completely busted again. This WIP took 6 1/2 hours, and I'm exhausted. Very much not looking forward to working on those, since those two have all kinds of fucked up speedup tricks for non-interlaced and/or non-hires video modes. Note 3: if you're on Windows and you saved your system folders somewhere else, now'd be a good time to move them to %localappdata%/higan
2016-01-15 10:06:51 +00:00
settings["Video/BlurEmulation"].setValue(blurEmulation.checked());
if(emulator) emulator->set("Blur Emulation", blurEmulation.checked());
});
colorEmulation.setText("Colors").setChecked(settings["Video/ColorEmulation"].boolean()).onToggle([&] {
settings["Video/ColorEmulation"].setValue(colorEmulation.checked());
Update to v096r07 release. byuu says: Changelog: - configuration files are now stored in localpath() instead of configpath() - Video gamma/saturation/luminance sliders are gone now, sorry - added Video Filter->Blur Emulation [1] - added Video Filter->Scanline Emulation [2] - improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn] [1] For the Famicom, this does nothing. For the Super Famicom, this performs horizontal blending for proper pseudo-hires translucency. For the Game Boy, Game Boy Color, and Game Boy Advance, this performs interframe blending (each frame is the average of the current and previous frame), which is important for things like the GBVideoPlayer. [2] Right now, this only applies to the Super Famicom, but it'll come to the Famicom in the future. For the Super Famicom, this option doesn't just add scanlines, it simulates the phosphor decay that's visible in interlace mode. If you observe an interlaced game like RPM Racing on a real SNES, you'll notice that even on perfectly still screens, the image appears to shake. This option emulates that effect. Note 1: the buffering right now is a little sub-optimal, so there will be a slight speed hit with this new support. Since the core is now generating native ARGB8888 colors, it might as well call out to the interface to lock/unlock/refresh the video, that way it can render directly to the screen. Although ... that might not be such a hot idea, since the GBx interframe blending reads from the target buffer, and that tends to be a catastrophic option for performance. Note 2: the balanced and performance profiles for the SNES are completely busted again. This WIP took 6 1/2 hours, and I'm exhausted. Very much not looking forward to working on those, since those two have all kinds of fucked up speedup tricks for non-interlaced and/or non-hires video modes. Note 3: if you're on Windows and you saved your system folders somewhere else, now'd be a good time to move them to %localappdata%/higan
2016-01-15 10:06:51 +00:00
if(emulator) emulator->set("Color Emulation", colorEmulation.checked());
});
scanlineEmulation.setText("Scanlines").setChecked(settings["Video/ScanlineEmulation"].boolean()).setVisible(false).onToggle([&] {
Update to v096r07 release. byuu says: Changelog: - configuration files are now stored in localpath() instead of configpath() - Video gamma/saturation/luminance sliders are gone now, sorry - added Video Filter->Blur Emulation [1] - added Video Filter->Scanline Emulation [2] - improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn] [1] For the Famicom, this does nothing. For the Super Famicom, this performs horizontal blending for proper pseudo-hires translucency. For the Game Boy, Game Boy Color, and Game Boy Advance, this performs interframe blending (each frame is the average of the current and previous frame), which is important for things like the GBVideoPlayer. [2] Right now, this only applies to the Super Famicom, but it'll come to the Famicom in the future. For the Super Famicom, this option doesn't just add scanlines, it simulates the phosphor decay that's visible in interlace mode. If you observe an interlaced game like RPM Racing on a real SNES, you'll notice that even on perfectly still screens, the image appears to shake. This option emulates that effect. Note 1: the buffering right now is a little sub-optimal, so there will be a slight speed hit with this new support. Since the core is now generating native ARGB8888 colors, it might as well call out to the interface to lock/unlock/refresh the video, that way it can render directly to the screen. Although ... that might not be such a hot idea, since the GBx interframe blending reads from the target buffer, and that tends to be a catastrophic option for performance. Note 2: the balanced and performance profiles for the SNES are completely busted again. This WIP took 6 1/2 hours, and I'm exhausted. Very much not looking forward to working on those, since those two have all kinds of fucked up speedup tricks for non-interlaced and/or non-hires video modes. Note 3: if you're on Windows and you saved your system folders somewhere else, now'd be a good time to move them to %localappdata%/higan
2016-01-15 10:06:51 +00:00
settings["Video/ScanlineEmulation"].setValue(scanlineEmulation.checked());
if(emulator) emulator->set("Scanline Emulation", scanlineEmulation.checked());
});
maskOverscan.setText("Mask Overscan").setChecked(settings["Video/Overscan/Mask"].boolean()).onToggle([&] {
settings["Video/Overscan/Mask"].setValue(maskOverscan.checked());
});
videoShaderMenu.setText("Video Shader");
videoShaderNone.setText("None").onActivate([&] {
settings["Video/Shader"].setValue("None");
program->updateVideoShader();
});
videoShaderBlur.setText("Blur").onActivate([&] {
settings["Video/Shader"].setValue("Blur");
program->updateVideoShader();
});
2015-11-08 08:54:42 +00:00
loadShaders();
synchronizeVideo.setText("Synchronize Video").setChecked(settings["Video/Synchronize"].boolean()).setVisible(false).onToggle([&] {
settings["Video/Synchronize"].setValue(synchronizeVideo.checked());
video->set(Video::Synchronize, synchronizeVideo.checked());
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
});
synchronizeAudio.setText("Synchronize Audio").setChecked(settings["Audio/Synchronize"].boolean()).onToggle([&] {
settings["Audio/Synchronize"].setValue(synchronizeAudio.checked());
audio->set(Audio::Synchronize, synchronizeAudio.checked());
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
});
muteAudio.setText("Mute Audio").setChecked(settings["Audio/Mute"].boolean()).onToggle([&] {
settings["Audio/Mute"].setValue(muteAudio.checked());
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
program->updateAudioEffects();
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
});
showStatusBar.setText("Show Status Bar").setChecked(settings["UserInterface/ShowStatusBar"].boolean()).onToggle([&] {
settings["UserInterface/ShowStatusBar"].setValue(showStatusBar.checked());
statusBar.setVisible(showStatusBar.checked());
if(visible()) resizeViewport();
});
Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
showConfiguration.setText("Configuration ...").onActivate([&] { settingsManager->show(2); });
toolsMenu.setText("Tools").setVisible(false);
saveStateMenu.setText("Save State");
saveSlot1.setText("Slot 1").onActivate([&] { program->saveState(1); });
saveSlot2.setText("Slot 2").onActivate([&] { program->saveState(2); });
saveSlot3.setText("Slot 3").onActivate([&] { program->saveState(3); });
saveSlot4.setText("Slot 4").onActivate([&] { program->saveState(4); });
saveSlot5.setText("Slot 5").onActivate([&] { program->saveState(5); });
loadStateMenu.setText("Load State");
loadSlot1.setText("Slot 1").onActivate([&] { program->loadState(1); });
loadSlot2.setText("Slot 2").onActivate([&] { program->loadState(2); });
loadSlot3.setText("Slot 3").onActivate([&] { program->loadState(3); });
loadSlot4.setText("Slot 4").onActivate([&] { program->loadState(4); });
loadSlot5.setText("Slot 5").onActivate([&] { program->loadState(5); });
cheatEditor.setText("Cheat Editor").onActivate([&] { toolsManager->show(0); });
stateManager.setText("State Manager").onActivate([&] { toolsManager->show(1); });
Update to higan and icarus v095r15 release. r13 and r14 weren't posted as individual releases, but their changelogs were posted. byuu says about r13: I'm not going to be posting WIPs for r13 and above for a while. The reason is that I'm working on the major manifest overhaul I've discussed previously on the icarus subforum. I'm recreating my boards database from scratch using the map files and the new map analyzer. The only games that will load are ones I've created board definitions for, and updated sfc/cartridge/markup.cpp to parse. Once I've finished all the boards, then I'll update the heuristics. Then finally, I'll sync the syntax changes over to the fc, gb, gba cores. Once that's done, I'll start posting WIPs again, along with a new build of icarus. But I'll still post changelogs as I work through things. Changelog (r13): - preservation: created new database-builder tool (merges region-specific databases with boards) - icarus: support new, external database format (~/.config/icarus/Database/(Super Famicom.bml, ...) - added 1A3B-(10,11,12); 1A3B-20 byuu says about r14: r14 work: I successfully created mappings for every board used in the US set. I also updated icarus' heuristics to use the new mappings, and created ones there for the boards that are only in the JP set. Then I patched icarus to support pulling games out of the database when it's used on a game folder to generate a manifest file. Then I updated a lot of code in higan/sfc to support the new mapping syntax. sfc/cartridge/markup.cpp is about half the size it used to be with the new mappings, and I was able to kill off both map/id and map/select entirely. Then I updated all four emulated systems (and both subsystems) to use "board" as the root node, and harmonized their syntax (made them all more consistent with each other.) Then I added a manifest viewer to the tools window+menu. It's kind of an advanced user feature, but oh well. No reason to coddle people when the feature is very useful for developers. The viewer will show all manifests in order when you load multi-cart games as well. Still not going to call any syntax 100% done right now, but thankfully with the new manifest-free folders, nobody will have to do anything to use the new format. Just download the new version and go. The Super Famicom Event stuff is currently broken (CC92/PF94 boards). That's gonna be fun to support. byuu says about r15: EDIT: small bug in icarus with heuristics. Edit core/super-famicom.cpp line 27: if(/*auto*/ markup = cartridge.markup) { Gotta remove that "auto" so that it returns valid markup. Resolved the final concerns I had with the new manifest format. Right now there are two things that are definitely broken: MCC (BS-X Town cart) and Event (CC '92 and PF'94). And there are a few things that are untested: SPC7110, EpsonRTC, SharpRTC, SDD1+RAM, SufamiTurbo, BS-X slotted carts.
2015-12-19 08:52:34 +00:00
manifestViewer.setText("Manifest Viewer").onActivate([&] { toolsManager->show(2); });
Update to v096r02 (OS X Preview for Developers) release. byuu says: Warning: this is not for the faint of heart. This is a very early, unpolished, buggy release. But help testing/fixing bugs would be greatly appreciated for anyone willing. Requirements: - Mac OS X 10.7+ - Xcode 7.2+ Installation Commands: cd higan gmake -j 4 gmake install cd ../icarus gmake -j 4 gmake install (gmake install is absolutely required, sorry. You'll be missing key files in key places if you don't run it, and nothing will work.) (gmake uninstall also exists, or you can just delete the .app bundles from your Applications folder, and the Dev folder on your desktop.) If you want to use the GBA emulation, then you need to drop the GBA BIOS into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom Usage: You'll now find higan.app and icarus.app in your Applications folders. First, run icarus.app, navigate to where you keep your game ROMs. Now click the settings button at the bottom right, and check "Create Manifests", and click OK. (You'll need to do this every time you run icarus because there's some sort of bug on OSX saving the settings.) Now click "Import", and let it bring in your games into ~/Emulation. Note: "Create Manifests" is required. I don't yet have a pipe implementation on OS X for higan to invoke icarus yet. If you don't check this box, it won't create manifest.bml files, and your games won't run at all. Now you can run higan.app. The first thing you'll want to do is go to higan->Preferences... and assign inputs for your gamepads. At the very least, do it for the default controller for all the systems you want to emulate. Now this is very important ... close the application at this point so that it writes your config file to disk. There's a serious crashing bug, and if you trigger it, you'll lose your input bindings. Now the really annoying part ... go to Library->{System} and pick the game you want to play. Right now, there's a ~50% chance the application will bomb. It seems the hiro::pListView object is getting destroyed, yet somehow the internal Cocoa callbacks are being triggered anyway. I don't know how this is possible, and my attempts to debug with lldb have been a failure :( If you're unlucky, the application will crash. Restart and try again. If it crashes every single time, then you can try launching your game from the command-line instead. Example: open /Applications/higan.app \ --args ~/Emulation/Super\ Famicom/Zelda3.sfc/ Help wanted: I could really, really, really use some help with that crashing on game loading. There's a lot of rough edges, but they're all cosmetic. This one thing is pretty much the only major show-stopping issue at the moment, preventing a wider general audience pre-compiled binary preview.
2016-01-05 02:59:19 +00:00
helpMenu.setText("Help");
documentation.setText("Documentation ...").onActivate([&] {
invoke("http://doc.byuu.org/higan/");
});
Update to v096r02 (OS X Preview for Developers) release. byuu says: Warning: this is not for the faint of heart. This is a very early, unpolished, buggy release. But help testing/fixing bugs would be greatly appreciated for anyone willing. Requirements: - Mac OS X 10.7+ - Xcode 7.2+ Installation Commands: cd higan gmake -j 4 gmake install cd ../icarus gmake -j 4 gmake install (gmake install is absolutely required, sorry. You'll be missing key files in key places if you don't run it, and nothing will work.) (gmake uninstall also exists, or you can just delete the .app bundles from your Applications folder, and the Dev folder on your desktop.) If you want to use the GBA emulation, then you need to drop the GBA BIOS into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom Usage: You'll now find higan.app and icarus.app in your Applications folders. First, run icarus.app, navigate to where you keep your game ROMs. Now click the settings button at the bottom right, and check "Create Manifests", and click OK. (You'll need to do this every time you run icarus because there's some sort of bug on OSX saving the settings.) Now click "Import", and let it bring in your games into ~/Emulation. Note: "Create Manifests" is required. I don't yet have a pipe implementation on OS X for higan to invoke icarus yet. If you don't check this box, it won't create manifest.bml files, and your games won't run at all. Now you can run higan.app. The first thing you'll want to do is go to higan->Preferences... and assign inputs for your gamepads. At the very least, do it for the default controller for all the systems you want to emulate. Now this is very important ... close the application at this point so that it writes your config file to disk. There's a serious crashing bug, and if you trigger it, you'll lose your input bindings. Now the really annoying part ... go to Library->{System} and pick the game you want to play. Right now, there's a ~50% chance the application will bomb. It seems the hiro::pListView object is getting destroyed, yet somehow the internal Cocoa callbacks are being triggered anyway. I don't know how this is possible, and my attempts to debug with lldb have been a failure :( If you're unlucky, the application will crash. Restart and try again. If it crashes every single time, then you can try launching your game from the command-line instead. Example: open /Applications/higan.app \ --args ~/Emulation/Super\ Famicom/Zelda3.sfc/ Help wanted: I could really, really, really use some help with that crashing on game loading. There's a lot of rough edges, but they're all cosmetic. This one thing is pretty much the only major show-stopping issue at the moment, preventing a wider general audience pre-compiled binary preview.
2016-01-05 02:59:19 +00:00
about.setText("About ...").onActivate([&] {
MessageDialog().setParent(*this).setTitle("About higan ...").setText({
Update to v098r01 release. byuu says: Changelog: - SFC: balanced profile removed - SFC: performance profile removed - SFC: code for handling non-threaded CPU, SMP, DSP, PPU removed - SFC: Coprocessor, Controller (and expansion port) shared Thread code merged to SFC::Cothread - Cothread here just means "Thread with CPU affinity" (couldn't think of a better name, sorry) - SFC: CPU now has vector<Thread*> coprocessors, peripherals; - this is the beginning of work to allow expansion port devices to be dynamically changed at run-time - ruby: all audio drivers default to 48000hz instead of 22050hz now if no frequency is assigned - note: the WASAPI driver can default to whatever the native frequency is; doesn't have to be 48000hz - tomoko: removed the ability to change the frequency from the UI (but it will display the frequency used) - tomoko: removed the timing settings panel - the goal is to work toward smooth video via adaptive sync - the model is broken by not being in control of the audio frequency anyway - it's further broken by PAL running at 50hz and WSC running at 75hz - it was always broken anyway by SNES interlace timing varying from progressive timing - higan: audio/ stub created (for now, it's just nall/dsp/ moved here and included as a header) - higan: video/ stub created - higan/GNUmakefile: now includes build rules for essential components (libco, emulator, audio, video) The audio changes are in preparation to merge wareya's awesome WASAPI work without the need for the nall/dsp resampler.
2016-04-09 03:40:12 +00:00
Emulator::Name, "/tomoko v", Emulator::Version, "\n\n",
Update to v096r02 (OS X Preview for Developers) release. byuu says: Warning: this is not for the faint of heart. This is a very early, unpolished, buggy release. But help testing/fixing bugs would be greatly appreciated for anyone willing. Requirements: - Mac OS X 10.7+ - Xcode 7.2+ Installation Commands: cd higan gmake -j 4 gmake install cd ../icarus gmake -j 4 gmake install (gmake install is absolutely required, sorry. You'll be missing key files in key places if you don't run it, and nothing will work.) (gmake uninstall also exists, or you can just delete the .app bundles from your Applications folder, and the Dev folder on your desktop.) If you want to use the GBA emulation, then you need to drop the GBA BIOS into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom Usage: You'll now find higan.app and icarus.app in your Applications folders. First, run icarus.app, navigate to where you keep your game ROMs. Now click the settings button at the bottom right, and check "Create Manifests", and click OK. (You'll need to do this every time you run icarus because there's some sort of bug on OSX saving the settings.) Now click "Import", and let it bring in your games into ~/Emulation. Note: "Create Manifests" is required. I don't yet have a pipe implementation on OS X for higan to invoke icarus yet. If you don't check this box, it won't create manifest.bml files, and your games won't run at all. Now you can run higan.app. The first thing you'll want to do is go to higan->Preferences... and assign inputs for your gamepads. At the very least, do it for the default controller for all the systems you want to emulate. Now this is very important ... close the application at this point so that it writes your config file to disk. There's a serious crashing bug, and if you trigger it, you'll lose your input bindings. Now the really annoying part ... go to Library->{System} and pick the game you want to play. Right now, there's a ~50% chance the application will bomb. It seems the hiro::pListView object is getting destroyed, yet somehow the internal Cocoa callbacks are being triggered anyway. I don't know how this is possible, and my attempts to debug with lldb have been a failure :( If you're unlucky, the application will crash. Restart and try again. If it crashes every single time, then you can try launching your game from the command-line instead. Example: open /Applications/higan.app \ --args ~/Emulation/Super\ Famicom/Zelda3.sfc/ Help wanted: I could really, really, really use some help with that crashing on game loading. There's a lot of rough edges, but they're all cosmetic. This one thing is pretty much the only major show-stopping issue at the moment, preventing a wider general audience pre-compiled binary preview.
2016-01-05 02:59:19 +00:00
"Author: ", Emulator::Author, "\n",
"License: ", Emulator::License, "\n",
"Website: ", Emulator::Website
}).information();
});
Update to v094r43 release. byuu says: Updated to compile with all of the new hiro changes. My next step is to write up hiro API documentation, and move the API from alpha (constantly changing) to beta (rarely changing), in preparation for the first stable release (backward-compatible changes only.) Added "--fullscreen" command-line option. I like this over a configuration file option. Lets you use the emulator in both modes without having to modify the config file each time. Also enhanced the command-line game loading. You can now use any of these methods: higan /path/to/game-folder.sfc higan /path/to/game-folder.sfc/ higan /path/to/game-folder.sfc/program.rom The idea is to support launchers that insist on loading files only. Technically, the file can be any name (manifest.bml also works); the only criteria is that the file actually exists and is a file, and not a directory. This is a requirement to support the first version (a directory lacking the trailing / identifier), because I don't want my nall::string class to query the file system to determine if the string is an actual existing file or directory for its pathname() / dirname() functions. Anyway, every game folder I've made so far has program.rom, and that's very unlikely to change, so this should be fine. Now, of course, if you drop a regular "game.sfc" file on the emulator, it won't even try to load it, unless it's in a folder that ends in .fc, .sfc, etc. In which case, it'll bail out immediately by being unable to produce a manifest for what is obviously not really a game folder.
2015-08-30 02:08:26 +00:00
statusBar.setFont(Font().setBold());
statusBar.setVisible(settings["UserInterface/ShowStatusBar"].boolean());
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
viewport.setDroppable().onDrop([&](auto locations) {
if(!directory::exists(locations(0))) return;
program->mediumQueue.append(locations(0));
program->loadMedium();
});
onClose([&] { program->quit(); });
setTitle({"higan v", Emulator::Version});
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
setResizable(false);
Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
setBackgroundColor({0, 0, 0});
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
resizeViewport();
setCentered();
Update to v096r02 (OS X Preview for Developers) release. byuu says: Warning: this is not for the faint of heart. This is a very early, unpolished, buggy release. But help testing/fixing bugs would be greatly appreciated for anyone willing. Requirements: - Mac OS X 10.7+ - Xcode 7.2+ Installation Commands: cd higan gmake -j 4 gmake install cd ../icarus gmake -j 4 gmake install (gmake install is absolutely required, sorry. You'll be missing key files in key places if you don't run it, and nothing will work.) (gmake uninstall also exists, or you can just delete the .app bundles from your Applications folder, and the Dev folder on your desktop.) If you want to use the GBA emulation, then you need to drop the GBA BIOS into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom Usage: You'll now find higan.app and icarus.app in your Applications folders. First, run icarus.app, navigate to where you keep your game ROMs. Now click the settings button at the bottom right, and check "Create Manifests", and click OK. (You'll need to do this every time you run icarus because there's some sort of bug on OSX saving the settings.) Now click "Import", and let it bring in your games into ~/Emulation. Note: "Create Manifests" is required. I don't yet have a pipe implementation on OS X for higan to invoke icarus yet. If you don't check this box, it won't create manifest.bml files, and your games won't run at all. Now you can run higan.app. The first thing you'll want to do is go to higan->Preferences... and assign inputs for your gamepads. At the very least, do it for the default controller for all the systems you want to emulate. Now this is very important ... close the application at this point so that it writes your config file to disk. There's a serious crashing bug, and if you trigger it, you'll lose your input bindings. Now the really annoying part ... go to Library->{System} and pick the game you want to play. Right now, there's a ~50% chance the application will bomb. It seems the hiro::pListView object is getting destroyed, yet somehow the internal Cocoa callbacks are being triggered anyway. I don't know how this is possible, and my attempts to debug with lldb have been a failure :( If you're unlucky, the application will crash. Restart and try again. If it crashes every single time, then you can try launching your game from the command-line instead. Example: open /Applications/higan.app \ --args ~/Emulation/Super\ Famicom/Zelda3.sfc/ Help wanted: I could really, really, really use some help with that crashing on game loading. There's a lot of rough edges, but they're all cosmetic. This one thing is pretty much the only major show-stopping issue at the moment, preventing a wider general audience pre-compiled binary preview.
2016-01-05 02:59:19 +00:00
#if defined(PLATFORM_WINDOWS)
Application::Windows::onModalChange([](bool modal) { if(modal && audio) audio->clear(); });
#endif
Update to v096r02 (OS X Preview for Developers) release. byuu says: Warning: this is not for the faint of heart. This is a very early, unpolished, buggy release. But help testing/fixing bugs would be greatly appreciated for anyone willing. Requirements: - Mac OS X 10.7+ - Xcode 7.2+ Installation Commands: cd higan gmake -j 4 gmake install cd ../icarus gmake -j 4 gmake install (gmake install is absolutely required, sorry. You'll be missing key files in key places if you don't run it, and nothing will work.) (gmake uninstall also exists, or you can just delete the .app bundles from your Applications folder, and the Dev folder on your desktop.) If you want to use the GBA emulation, then you need to drop the GBA BIOS into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom Usage: You'll now find higan.app and icarus.app in your Applications folders. First, run icarus.app, navigate to where you keep your game ROMs. Now click the settings button at the bottom right, and check "Create Manifests", and click OK. (You'll need to do this every time you run icarus because there's some sort of bug on OSX saving the settings.) Now click "Import", and let it bring in your games into ~/Emulation. Note: "Create Manifests" is required. I don't yet have a pipe implementation on OS X for higan to invoke icarus yet. If you don't check this box, it won't create manifest.bml files, and your games won't run at all. Now you can run higan.app. The first thing you'll want to do is go to higan->Preferences... and assign inputs for your gamepads. At the very least, do it for the default controller for all the systems you want to emulate. Now this is very important ... close the application at this point so that it writes your config file to disk. There's a serious crashing bug, and if you trigger it, you'll lose your input bindings. Now the really annoying part ... go to Library->{System} and pick the game you want to play. Right now, there's a ~50% chance the application will bomb. It seems the hiro::pListView object is getting destroyed, yet somehow the internal Cocoa callbacks are being triggered anyway. I don't know how this is possible, and my attempts to debug with lldb have been a failure :( If you're unlucky, the application will crash. Restart and try again. If it crashes every single time, then you can try launching your game from the command-line instead. Example: open /Applications/higan.app \ --args ~/Emulation/Super\ Famicom/Zelda3.sfc/ Help wanted: I could really, really, really use some help with that crashing on game loading. There's a lot of rough edges, but they're all cosmetic. This one thing is pretty much the only major show-stopping issue at the moment, preventing a wider general audience pre-compiled binary preview.
2016-01-05 02:59:19 +00:00
#if defined(PLATFORM_MACOSX)
showConfigurationSeparator.setVisible(false);
showConfiguration.setVisible(false);
about.setVisible(false);
Update to v096r02 (OS X Preview for Developers) release. byuu says: Warning: this is not for the faint of heart. This is a very early, unpolished, buggy release. But help testing/fixing bugs would be greatly appreciated for anyone willing. Requirements: - Mac OS X 10.7+ - Xcode 7.2+ Installation Commands: cd higan gmake -j 4 gmake install cd ../icarus gmake -j 4 gmake install (gmake install is absolutely required, sorry. You'll be missing key files in key places if you don't run it, and nothing will work.) (gmake uninstall also exists, or you can just delete the .app bundles from your Applications folder, and the Dev folder on your desktop.) If you want to use the GBA emulation, then you need to drop the GBA BIOS into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom Usage: You'll now find higan.app and icarus.app in your Applications folders. First, run icarus.app, navigate to where you keep your game ROMs. Now click the settings button at the bottom right, and check "Create Manifests", and click OK. (You'll need to do this every time you run icarus because there's some sort of bug on OSX saving the settings.) Now click "Import", and let it bring in your games into ~/Emulation. Note: "Create Manifests" is required. I don't yet have a pipe implementation on OS X for higan to invoke icarus yet. If you don't check this box, it won't create manifest.bml files, and your games won't run at all. Now you can run higan.app. The first thing you'll want to do is go to higan->Preferences... and assign inputs for your gamepads. At the very least, do it for the default controller for all the systems you want to emulate. Now this is very important ... close the application at this point so that it writes your config file to disk. There's a serious crashing bug, and if you trigger it, you'll lose your input bindings. Now the really annoying part ... go to Library->{System} and pick the game you want to play. Right now, there's a ~50% chance the application will bomb. It seems the hiro::pListView object is getting destroyed, yet somehow the internal Cocoa callbacks are being triggered anyway. I don't know how this is possible, and my attempts to debug with lldb have been a failure :( If you're unlucky, the application will crash. Restart and try again. If it crashes every single time, then you can try launching your game from the command-line instead. Example: open /Applications/higan.app \ --args ~/Emulation/Super\ Famicom/Zelda3.sfc/ Help wanted: I could really, really, really use some help with that crashing on game loading. There's a lot of rough edges, but they're all cosmetic. This one thing is pretty much the only major show-stopping issue at the moment, preventing a wider general audience pre-compiled binary preview.
2016-01-05 02:59:19 +00:00
Application::Cocoa::onAbout([&] { about.doActivate(); });
Application::Cocoa::onActivate([&] { setFocused(); });
Application::Cocoa::onPreferences([&] { showConfiguration.doActivate(); });
Application::Cocoa::onQuit([&] { doClose(); });
#endif
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
}
auto Presentation::updateEmulator() -> void {
if(!emulator) return;
resetSystem.setVisible(emulator->information.resettable);
inputPort1.setVisible(false).reset();
inputPort2.setVisible(false).reset();
inputPort3.setVisible(false).reset();
Update to v098r11 release. byuu says: Changelog: - fixed nall/path.hpp compilation issue - fixed ruby/audio/xaudio header declaration compilation issue (again) - cleaned up xaudio2.hpp file to match my coding syntax (12.5% of the file was whitespace overkill) - added null terminator entry to nall/windows/utf8.hpp argc[] array - nall/windows/guid.hpp uses the Windows API for generating the GUID - this should stop all the bug reports where two nall users were generating GUIDs at the exact same second - fixed hiro/cocoa compilation issue with uint# types - fixed major higan/sfc Super Game Boy audio latency issue - fixed higan/sfc CPU core bug with pei, [dp], [dp]+y instructions - major cleanups to higan/processor/r65816 core - merged emulation/native-mode opcodes - use camel-case naming on memory.hpp functions - simplify address masking code for memory.hpp functions - simplify a few opcodes themselves (avoid redundant copies, etc) - rename regs.* to r.* to match modern convention of other CPU cores - removed device.order<> concept from Emulator::Interface - cores will now do the translation to make the job of the UI easier - fixed plurality naming of arrays in Emulator::Interface - example: emulator.ports[p].devices[d].inputs[i] - example: vector<Medium> media - probably more surprises Major show-stoppers to the next official release: - we need to work on GB core improvements: LY=153/0 case, multiple STAT IRQs case, GBC audio output regs, etc. - we need to re-add software cursors for light guns (Super Scope, Justifier) - after the above, we need to fix the turbo button for the Super Scope I really have no idea how I want to implement the light guns. Ideally, we'd want it in higan/video, so we can support the NES Zapper with the same code. But this isn't going to be easy, because only the SNES knows when its output is interlaced, and its resolutions can vary as {256,512}x{224,240,448,480} which requires pixel doubling that was hard-coded to the SNES-specific behavior, but isn't appropriate to be exposed in higan/video.
2016-05-25 11:13:02 +00:00
for(auto n : range(emulator->ports)) {
if(n >= 3) break;
Update to v098r11 release. byuu says: Changelog: - fixed nall/path.hpp compilation issue - fixed ruby/audio/xaudio header declaration compilation issue (again) - cleaned up xaudio2.hpp file to match my coding syntax (12.5% of the file was whitespace overkill) - added null terminator entry to nall/windows/utf8.hpp argc[] array - nall/windows/guid.hpp uses the Windows API for generating the GUID - this should stop all the bug reports where two nall users were generating GUIDs at the exact same second - fixed hiro/cocoa compilation issue with uint# types - fixed major higan/sfc Super Game Boy audio latency issue - fixed higan/sfc CPU core bug with pei, [dp], [dp]+y instructions - major cleanups to higan/processor/r65816 core - merged emulation/native-mode opcodes - use camel-case naming on memory.hpp functions - simplify address masking code for memory.hpp functions - simplify a few opcodes themselves (avoid redundant copies, etc) - rename regs.* to r.* to match modern convention of other CPU cores - removed device.order<> concept from Emulator::Interface - cores will now do the translation to make the job of the UI easier - fixed plurality naming of arrays in Emulator::Interface - example: emulator.ports[p].devices[d].inputs[i] - example: vector<Medium> media - probably more surprises Major show-stoppers to the next official release: - we need to work on GB core improvements: LY=153/0 case, multiple STAT IRQs case, GBC audio output regs, etc. - we need to re-add software cursors for light guns (Super Scope, Justifier) - after the above, we need to fix the turbo button for the Super Scope I really have no idea how I want to implement the light guns. Ideally, we'd want it in higan/video, so we can support the NES Zapper with the same code. But this isn't going to be easy, because only the SNES knows when its output is interlaced, and its resolutions can vary as {256,512}x{224,240,448,480} which requires pixel doubling that was hard-coded to the SNES-specific behavior, but isn't appropriate to be exposed in higan/video.
2016-05-25 11:13:02 +00:00
auto& port = emulator->ports[n];
auto& menu = (n == 0 ? inputPort1 : n == 1 ? inputPort2 : inputPort3);
menu.setText(port.name);
Group devices;
Update to v098r11 release. byuu says: Changelog: - fixed nall/path.hpp compilation issue - fixed ruby/audio/xaudio header declaration compilation issue (again) - cleaned up xaudio2.hpp file to match my coding syntax (12.5% of the file was whitespace overkill) - added null terminator entry to nall/windows/utf8.hpp argc[] array - nall/windows/guid.hpp uses the Windows API for generating the GUID - this should stop all the bug reports where two nall users were generating GUIDs at the exact same second - fixed hiro/cocoa compilation issue with uint# types - fixed major higan/sfc Super Game Boy audio latency issue - fixed higan/sfc CPU core bug with pei, [dp], [dp]+y instructions - major cleanups to higan/processor/r65816 core - merged emulation/native-mode opcodes - use camel-case naming on memory.hpp functions - simplify address masking code for memory.hpp functions - simplify a few opcodes themselves (avoid redundant copies, etc) - rename regs.* to r.* to match modern convention of other CPU cores - removed device.order<> concept from Emulator::Interface - cores will now do the translation to make the job of the UI easier - fixed plurality naming of arrays in Emulator::Interface - example: emulator.ports[p].devices[d].inputs[i] - example: vector<Medium> media - probably more surprises Major show-stoppers to the next official release: - we need to work on GB core improvements: LY=153/0 case, multiple STAT IRQs case, GBC audio output regs, etc. - we need to re-add software cursors for light guns (Super Scope, Justifier) - after the above, we need to fix the turbo button for the Super Scope I really have no idea how I want to implement the light guns. Ideally, we'd want it in higan/video, so we can support the NES Zapper with the same code. But this isn't going to be easy, because only the SNES knows when its output is interlaced, and its resolutions can vary as {256,512}x{224,240,448,480} which requires pixel doubling that was hard-coded to the SNES-specific behavior, but isn't appropriate to be exposed in higan/video.
2016-05-25 11:13:02 +00:00
for(auto& device : port.devices) {
MenuRadioItem item{&menu};
item.setText(device.name).onActivate([=] {
auto path = string{emulator->information.name, "/", port.name}.replace(" ", "");
settings[path].setValue(device.name);
emulator->connect(port.id, device.id);
});
devices.append(item);
}
if(devices.objectCount() > 1) {
auto path = string{emulator->information.name, "/", port.name}.replace(" ", "");
auto device = settings(path).text();
Update to v097r12 release. byuu says: Nothing WS-related this time. First, I fixed expansion port device mapping. On first load, it was mapping the expansion port device too late, so it ended up not taking effect. I had to spin out the logic for that into Program::connectDevices(). This was proving to be quite annoying while testing eBoot (SNES-Hook simulation.) Second, I fixed the audio->set(Frequency, Latency) functions to take (uint) parameters from the configuration file, so the weird behavior around changing settings in the audio panel should hopefully be gone now. Third, I rewrote the interface->load,unload functions to call into the (Emulator)::System::load,unload functions. And I have those call out to Cartridge::load,unload. Before, this was inverted, and Cartridge::load() was invoking System::load(), which I felt was kind of backward. The Super Game Boy really didn't like this change, however. And it took me a few hours to power through it. Before, I had the Game Boy core dummying out all the interface->(load,save)Request calls, and having the SNES core make them for it. This is because the folder paths and IDs will be different between the two cores. I've redesigned things so that ICD2's Emulator::Interface overloads loadRequest and saveRequest, and translates the requests into new requests for the SuperFamicom core. This allows the Game Boy code to do its own loading for everything without a bunch of Super Game Boy special casing, and without any awkwardness around powering on with no cartridge inserted. This also lets the SNES side of things simply call into higher-level GameBoy::interface->load,save(id, stream) functions instead of stabbing at the raw underlying state inside of various Game Boy core emulation classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
for(auto item : devices.objects<MenuRadioItem>()) {
if(item.text() == device) item.setChecked();
}
menu.setVisible();
}
}
systemMenuSeparatorPorts.setVisible(inputPort1.visible() || inputPort2.visible() || inputPort3.visible());
Update to v096r07 release. byuu says: Changelog: - configuration files are now stored in localpath() instead of configpath() - Video gamma/saturation/luminance sliders are gone now, sorry - added Video Filter->Blur Emulation [1] - added Video Filter->Scanline Emulation [2] - improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn] [1] For the Famicom, this does nothing. For the Super Famicom, this performs horizontal blending for proper pseudo-hires translucency. For the Game Boy, Game Boy Color, and Game Boy Advance, this performs interframe blending (each frame is the average of the current and previous frame), which is important for things like the GBVideoPlayer. [2] Right now, this only applies to the Super Famicom, but it'll come to the Famicom in the future. For the Super Famicom, this option doesn't just add scanlines, it simulates the phosphor decay that's visible in interlace mode. If you observe an interlaced game like RPM Racing on a real SNES, you'll notice that even on perfectly still screens, the image appears to shake. This option emulates that effect. Note 1: the buffering right now is a little sub-optimal, so there will be a slight speed hit with this new support. Since the core is now generating native ARGB8888 colors, it might as well call out to the interface to lock/unlock/refresh the video, that way it can render directly to the screen. Although ... that might not be such a hot idea, since the GBx interframe blending reads from the target buffer, and that tends to be a catastrophic option for performance. Note 2: the balanced and performance profiles for the SNES are completely busted again. This WIP took 6 1/2 hours, and I'm exhausted. Very much not looking forward to working on those, since those two have all kinds of fucked up speedup tricks for non-interlaced and/or non-hires video modes. Note 3: if you're on Windows and you saved your system folders somewhere else, now'd be a good time to move them to %localappdata%/higan
2016-01-15 10:06:51 +00:00
emulator->set("Blur Emulation", blurEmulation.checked());
emulator->set("Color Emulation", colorEmulation.checked());
emulator->set("Scanline Emulation", scanlineEmulation.checked());
}
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
auto Presentation::resizeViewport() -> void {
int width = emulator ? emulator->information.width : 256;
int height = emulator ? emulator->information.height : 240;
2015-11-08 08:54:42 +00:00
double stretch = emulator ? emulator->information.aspectRatio : 1.0;
if(stretch != 1.0) {
//aspect correction is always enabled in fullscreen mode
if(!fullScreen() && !settings["Video/AspectCorrection"].boolean()) stretch = 1.0;
2015-11-08 08:54:42 +00:00
}
int scale = 2;
if(settings["Video/Scale"].text() == "Small" ) scale = 2;
if(settings["Video/Scale"].text() == "Medium") scale = 3;
if(settings["Video/Scale"].text() == "Large" ) scale = 4;
Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
int windowWidth = 0, windowHeight = 0;
2015-11-08 08:54:42 +00:00
if(!fullScreen()) {
windowWidth = 256 * scale * (settings["Video/AspectCorrection"].boolean() ? 8.0 / 7.0 : 1.0);
2015-11-08 08:54:42 +00:00
windowHeight = 240 * scale;
} else {
windowWidth = geometry().width();
windowHeight = geometry().height();
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
}
int multiplier = min(windowWidth / (int)(width * stretch), windowHeight / height);
2015-11-08 08:54:42 +00:00
width = width * multiplier * stretch;
height = height * multiplier;
2015-11-08 08:54:42 +00:00
if(!fullScreen()) setSize({windowWidth, windowHeight});
viewport.setGeometry({(windowWidth - width) / 2, (windowHeight - height) / 2, width, height});
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
if(!emulator) drawSplashScreen();
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
}
auto Presentation::toggleFullScreen() -> void {
if(fullScreen() == false) {
menuBar.setVisible(false);
statusBar.setVisible(false);
setResizable(true);
setFullScreen(true);
if(!input->acquired()) input->acquire();
} else {
if(input->acquired()) input->release();
setFullScreen(false);
setResizable(false);
menuBar.setVisible(true);
statusBar.setVisible(settings["UserInterface/ShowStatusBar"].boolean());
}
Application::processEvents();
resizeViewport();
}
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
auto Presentation::drawSplashScreen() -> void {
if(!video) return;
uint32_t* output;
uint length;
if(video->lock(output, length, 256, 240)) {
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
for(auto y : range(240)) {
auto dp = output + y * (length >> 2);
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
for(auto x : range(256)) *dp++ = 0xff000000;
}
video->unlock();
video->refresh();
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
}
}
2015-11-08 08:54:42 +00:00
auto Presentation::loadShaders() -> void {
auto pathname = locate("Video Shaders/");
Update to v097 release. byuu says: This release features improvements to all emulation cores, but most substantially for the Game Boy core. All of blargg's test ROMs that pass in gambatte now either pass in higan, or are off by 1-2 clocks (the actual behaviors are fully emulated.) I consider the Game Boy core to now be fairly accurate, but there's still more improvements to be had. Also, what's sure to be a major feature for some: higan now has full support for loading and playing ordinary ROM files, whether they have copier headers, weird extensions, or are inside compressed archives. You can load these games from the command-line, from the main Library menu (via Load ROM Image), or via drag-and-drop on the main higan window. Of course, fans of game folders and the library need not worry: that's still there as well. Also new, you can drop the (uncompressed) Game Boy Advance BIOS onto the higan main window to install it into the correct location with the correct file name. Lastly, this release technically restores Mac OS X support. However, it's still not very stable, so I have decided against releasing binaries at this time. I'd rather not rush this and leave a bad first impression for OS X users. Changelog (since v096): - higan: project source code hierarchy restructured; icarus directly integrated - higan: added software emulation of color-bleed, LCD-refresh, scanlines, interlacing - icarus: you can now load and import ROM files/archives from the main higan menu - NES: fixed manifest parsing for board mirroring and VRC pinouts - SNES: fixed manifest for Star Ocean - SNES: fixed manifest for Rockman X2,X3 - GB: enabling LCD restarts frame - GB: emulated extra OAM STAT IRQ quirk required for GBVideoPlayer (Shonumi) - GB: VBK, BGPI, OBPI are readable - GB: OAM DMA happens inside PPU core instead of CPU core - GB: fixed APU length and sweep operations - GB: emulated wave RAM quirks when accessing while channel is enabled - GB: improved timings of several CPU opcodes (gekkio) - GB: improved timings of OAM DMA refresh (gekkio) - GB: CPU uses open collector logic; return 0xFF for unmapped memory (gekkio) - GBA: fixed sequencer enable flags; fixes audio in Zelda - Minish Cap (Jonas Quinn) - GBA: fixed disassembler masking error (Lioncash) - hiro: Cocoa support added; higan can now be compiled on Mac OS X 10.7+ - nall: improved program path detection on Windows - higan/Windows: moved configuration data from %appdata% to %localappdata% - higan/Linux,BSD: moved configuration data from ~/.config/higan to ~/.local/higan
2016-01-17 08:59:25 +00:00
if(settings["Video/Driver"].text() == "OpenGL") {
for(auto shader : directory::folders(pathname, "*.shader")) {
if(videoShaders.objectCount() == 2) videoShaderMenu.append(MenuSeparator());
MenuRadioItem item{&videoShaderMenu};
item.setText(string{shader}.trimRight(".shader/", 1L)).onActivate([=] {
Update to v097 release. byuu says: This release features improvements to all emulation cores, but most substantially for the Game Boy core. All of blargg's test ROMs that pass in gambatte now either pass in higan, or are off by 1-2 clocks (the actual behaviors are fully emulated.) I consider the Game Boy core to now be fairly accurate, but there's still more improvements to be had. Also, what's sure to be a major feature for some: higan now has full support for loading and playing ordinary ROM files, whether they have copier headers, weird extensions, or are inside compressed archives. You can load these games from the command-line, from the main Library menu (via Load ROM Image), or via drag-and-drop on the main higan window. Of course, fans of game folders and the library need not worry: that's still there as well. Also new, you can drop the (uncompressed) Game Boy Advance BIOS onto the higan main window to install it into the correct location with the correct file name. Lastly, this release technically restores Mac OS X support. However, it's still not very stable, so I have decided against releasing binaries at this time. I'd rather not rush this and leave a bad first impression for OS X users. Changelog (since v096): - higan: project source code hierarchy restructured; icarus directly integrated - higan: added software emulation of color-bleed, LCD-refresh, scanlines, interlacing - icarus: you can now load and import ROM files/archives from the main higan menu - NES: fixed manifest parsing for board mirroring and VRC pinouts - SNES: fixed manifest for Star Ocean - SNES: fixed manifest for Rockman X2,X3 - GB: enabling LCD restarts frame - GB: emulated extra OAM STAT IRQ quirk required for GBVideoPlayer (Shonumi) - GB: VBK, BGPI, OBPI are readable - GB: OAM DMA happens inside PPU core instead of CPU core - GB: fixed APU length and sweep operations - GB: emulated wave RAM quirks when accessing while channel is enabled - GB: improved timings of several CPU opcodes (gekkio) - GB: improved timings of OAM DMA refresh (gekkio) - GB: CPU uses open collector logic; return 0xFF for unmapped memory (gekkio) - GBA: fixed sequencer enable flags; fixes audio in Zelda - Minish Cap (Jonas Quinn) - GBA: fixed disassembler masking error (Lioncash) - hiro: Cocoa support added; higan can now be compiled on Mac OS X 10.7+ - nall: improved program path detection on Windows - higan/Windows: moved configuration data from %appdata% to %localappdata% - higan/Linux,BSD: moved configuration data from ~/.config/higan to ~/.local/higan
2016-01-17 08:59:25 +00:00
settings["Video/Shader"].setValue({pathname, shader});
program->updateVideoShader();
});
videoShaders.append(item);
}
2015-11-08 08:54:42 +00:00
}
Update to v097 release. byuu says: This release features improvements to all emulation cores, but most substantially for the Game Boy core. All of blargg's test ROMs that pass in gambatte now either pass in higan, or are off by 1-2 clocks (the actual behaviors are fully emulated.) I consider the Game Boy core to now be fairly accurate, but there's still more improvements to be had. Also, what's sure to be a major feature for some: higan now has full support for loading and playing ordinary ROM files, whether they have copier headers, weird extensions, or are inside compressed archives. You can load these games from the command-line, from the main Library menu (via Load ROM Image), or via drag-and-drop on the main higan window. Of course, fans of game folders and the library need not worry: that's still there as well. Also new, you can drop the (uncompressed) Game Boy Advance BIOS onto the higan main window to install it into the correct location with the correct file name. Lastly, this release technically restores Mac OS X support. However, it's still not very stable, so I have decided against releasing binaries at this time. I'd rather not rush this and leave a bad first impression for OS X users. Changelog (since v096): - higan: project source code hierarchy restructured; icarus directly integrated - higan: added software emulation of color-bleed, LCD-refresh, scanlines, interlacing - icarus: you can now load and import ROM files/archives from the main higan menu - NES: fixed manifest parsing for board mirroring and VRC pinouts - SNES: fixed manifest for Star Ocean - SNES: fixed manifest for Rockman X2,X3 - GB: enabling LCD restarts frame - GB: emulated extra OAM STAT IRQ quirk required for GBVideoPlayer (Shonumi) - GB: VBK, BGPI, OBPI are readable - GB: OAM DMA happens inside PPU core instead of CPU core - GB: fixed APU length and sweep operations - GB: emulated wave RAM quirks when accessing while channel is enabled - GB: improved timings of several CPU opcodes (gekkio) - GB: improved timings of OAM DMA refresh (gekkio) - GB: CPU uses open collector logic; return 0xFF for unmapped memory (gekkio) - GBA: fixed sequencer enable flags; fixes audio in Zelda - Minish Cap (Jonas Quinn) - GBA: fixed disassembler masking error (Lioncash) - hiro: Cocoa support added; higan can now be compiled on Mac OS X 10.7+ - nall: improved program path detection on Windows - higan/Windows: moved configuration data from %appdata% to %localappdata% - higan/Linux,BSD: moved configuration data from ~/.config/higan to ~/.local/higan
2016-01-17 08:59:25 +00:00
if(settings["Video/Shader"].text() == "None") videoShaderNone.setChecked();
if(settings["Video/Shader"].text() == "Blur") videoShaderBlur.setChecked();
for(auto radioItem : videoShaders.objects<MenuRadioItem>()) {
if(settings["Video/Shader"].text() == string{pathname, radioItem.text(), ".shader/"}) {
radioItem.setChecked();
2015-11-08 08:54:42 +00:00
}
}
}