Update to v087r04 release.
byuu says:
Changelog:
- gameboy/ -> gb/
- GameBoy -> GB
- basic memory map for GBA
- enough code to execute the first BIOS instruction (b 0x68)
I have the code resetting r(15) to 0 on an exception just as a test.
Since that flushes the pipeline, that means we're basically executing "b
0x68" at 8MHz, and nothing else.
... and I am getting __6 motherfucking FPS__ at 4.4GHz on an i7.
Something is seriously, horribly, unfuckingbelievably wrong here, and
I can't figure out what it is.
My *fully complete* ARM core on the ST018 is even less efficient and
runs at 21.47MHz, and yet I get 60fps even after emulating the SNES
CPU+PPU @ 10+MHz each as well.
... I'm stuck. I can't proceed until we figure out what in the holy fuck
is going on here. So ... if anyone can help, please do. If we can't fix
this, the GBA emulation is dead.
I was able to profile on Windows, and I've included that in this WIP
under out/log.txt.
But it looks normal to me. But yeah, there's NO. FUCKING. WAY. This code
should be running this slowly.
2012-03-18 12:35:53 +00:00
|
|
|
#include <gb/gb.hpp>
|
2010-12-28 01:53:15 +00:00
|
|
|
|
2012-04-26 10:51:13 +00:00
|
|
|
namespace GameBoy {
|
2010-12-28 01:53:15 +00:00
|
|
|
|
Update to v098r04 release.
byuu says:
Changelog:
- SFC: fixed behavior of 21fx $21fe register when no device is connected
(must return zero)
- SFC: reduced 21fx buffer size to 1024 bytes in both directions to
mirror the FT232H we are using
- SFC: eliminated dsp/modulo-array.hpp [1]
- higan: implemented higan/video interface and migrated all cores to it
[2]
[1] the echo history buffer was 8-bytes, so there was no need for it at
all here. Not sure what I was thinking. The BRR buffer was 12-bytes, and
has very weird behavior ... but there's only a single location in the
code where it actually writes to this buffer. It's much easier to just
write to the buffer three times there instead of implementing an entire
class just to abstract away two lines of code. This change actually
boosted the speed from ~124.5fps to around ~127.5fps, but that's within
the margin of error for GCC. I doubt it's actually faster this way.
The DSP core could really use a ton of work. It comes from a port of
blargg's spc_dsp to my coding style, but he was extremely fond of using
32-bit signed integers everywhere. There's a lot of opportunity to
remove red tape masking by resizing the variables to their actual state
sizes.
I really need to find where I put spc_dsp6.sfc from blargg. It's a great
test to verify if I've made any mistakes in my implementation that would
cause regressions. Don't suppose anyone has it?
[2] so again, the idea is that higan/audio and higan/video are going to
sit between the emulation cores and the user interfaces. The hope is to
output raw encoding data from the emulation cores without having to
worry about the video display format (generally 24-bit RGB) of the host
display. And also to avoid having to repeat myself with eg three
separate implementations of interframe blending, and so on.
Furthermore, the idea is that the user interface can configure its side
of the settings, and the emulation cores can configure their sides.
Thus, neither has to worry about the other end. And now we can spin off
new user interfaces much easier without having to mess with all of these
things.
Right now, I've implemented color emulation, interframe blending and
SNES horizontal color bleed. I did not implement scanlines (and
interlace effects for them) yet, but I probably will at some point.
Further, for right now, the WonderSwan/Color screen rotation is busted
and will only show games in the horizontal orientation. Obviously this
must be fixed before the next official release, but I'll want to think
about how to implement it.
Also, the SNES light gun pointers are missing for now.
Things are a bit messy right now as I've gone through several revisions
of how to handle these things, so a good house cleaning is in order once
everything is feature-complete again. I need to sit down and think
through how and where I want to handle things like light gun cursors,
LCD icons, and maybe even rasterized text messages.
And obviously ... higan/audio is still just nall::DSP's headers. I need
to revamp that whole interface. I want to make it quite powerful with
a true audio mixer so I can handle things like
SNES+SGB+MSU1+Voicer-Kun+SNES-CD (five separate audio streams at once.)
The video system has the concept of "effects" for things like color
bleed and interframe blending. I want to extend on this with useful
other effects, such as NTSC simulation, maybe bringing back my mini-HQ2x
filter, etc. I'd also like to restore the saturation/gamma/luma
adjustment sliders ... I always liked allowing people to compensate for
their displays without having to change settings system-wide. Lastly,
I've always wanted to see some audio effects. Although I doubt we'll
ever get my dream of CoreAudio-style profiles, I'd like to get some
basic equalizer settings and echo/reverb effects in there.
2016-04-11 21:29:56 +00:00
|
|
|
#include "video.cpp"
|
2011-01-07 11:11:56 +00:00
|
|
|
#include "serialization.cpp"
|
2010-12-28 01:53:15 +00:00
|
|
|
System system;
|
2016-07-10 05:28:26 +00:00
|
|
|
Scheduler scheduler;
|
|
|
|
Cheat cheat;
|
2010-12-28 01:53:15 +00:00
|
|
|
|
2015-11-21 07:36:48 +00:00
|
|
|
auto System::run() -> void {
|
2016-07-10 05:28:26 +00:00
|
|
|
if(scheduler.enter() == Scheduler::Event::Frame) ppu.refresh();
|
2011-01-07 11:11:56 +00:00
|
|
|
}
|
|
|
|
|
Update to v097r12 release.
byuu says:
Nothing WS-related this time.
First, I fixed expansion port device mapping. On first load, it was
mapping the expansion port device too late, so it ended up not taking
effect. I had to spin out the logic for that into
Program::connectDevices(). This was proving to be quite annoying while
testing eBoot (SNES-Hook simulation.)
Second, I fixed the audio->set(Frequency, Latency) functions to take
(uint) parameters from the configuration file, so the weird behavior
around changing settings in the audio panel should hopefully be gone
now.
Third, I rewrote the interface->load,unload functions to call into the
(Emulator)::System::load,unload functions. And I have those call out to
Cartridge::load,unload. Before, this was inverted, and Cartridge::load()
was invoking System::load(), which I felt was kind of backward.
The Super Game Boy really didn't like this change, however. And it took
me a few hours to power through it. Before, I had the Game Boy core
dummying out all the interface->(load,save)Request calls, and having the
SNES core make them for it. This is because the folder paths and IDs
will be different between the two cores.
I've redesigned things so that ICD2's Emulator::Interface overloads
loadRequest and saveRequest, and translates the requests into new
requests for the SuperFamicom core. This allows the Game Boy code to do
its own loading for everything without a bunch of Super Game Boy special
casing, and without any awkwardness around powering on with no cartridge
inserted.
This also lets the SNES side of things simply call into higher-level
GameBoy::interface->load,save(id, stream) functions instead of stabbing
at the raw underlying state inside of various Game Boy core emulation
classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
|
|
|
auto System::runToSave() -> void {
|
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
2016-07-30 03:56:12 +00:00
|
|
|
scheduler.synchronize(cpu);
|
|
|
|
scheduler.synchronize(ppu);
|
|
|
|
scheduler.synchronize(apu);
|
2011-01-07 11:11:56 +00:00
|
|
|
}
|
|
|
|
|
2015-11-21 07:36:48 +00:00
|
|
|
auto System::init() -> void {
|
2012-07-15 09:47:35 +00:00
|
|
|
assert(interface != nullptr);
|
2010-12-28 01:53:15 +00:00
|
|
|
}
|
|
|
|
|
Update to v102r04 release.
byuu says:
Changelog:
- Super Game Boy support is functional once again
- new GameBoy::SuperGameBoyInterface class
- system.(dmg,cgb,sgb) is now Model::(Super)GameBoy(Color) ala the PC
Engine
- merged WonderSwanInterface, WonderSwanColorInterface shared
functions to WonderSwan::Interface
- merged GameBoyInterface, GameBoyColorInterface shared functions to
GameBoy::Interface
- Interface::unload() now calls Interface::save() for Master System,
Game Gear, Mega Drive, PC Engine, SuperGrafx
- PCE: emulated PCE-CD backup RAM; stored per-game as save.ram (2KiB
file)
- this means you can now save your progress in games like Neutopia
- the PCE-CD I/O registers like BRAM write protect are not
emulated yet
- PCE: IRQ sources now hold the IRQ line state, instead of the CPU
holding it
- this fixes most SuperGrafx games, which were fighting over the
VDC IRQ line previously
- PCE: CPU I/O $14xx should return the pending IRQ bits even if IRQs
are disabled
- PCE: VCE and the VDCs now synchronize to each other; fixes pixel
widths in all games
- PCE: greatly increased the accuracy of the VPC priority selection
code (windows may be buggy still)
- HuC6280: PLA, PLX, PLY should set Z, N flags; fixes many game bugs
[Jonas Quinn]
The big thing I wanted to do was enslave the VDC(s) to the VCE. But
unfortunately, I forgot about the asynchronous DMA channels that each
VDC supports, so this isn't going to be possible I'm afraid.
In the most demanding case, Daimakaimura in-game, we're looking at 85fps
on my Xeon E3 1276v3. So ... not great, and we don't even have sound
connected yet.
We are going to have to profile and optimize this code once sound
emulation and save states are in.
Basically, think of it like this: the VCE, VDC0, and VDC1 all have the
same overhead, scheduling wise (which is the bulk of the performance
loss) as the dot-renderer for the SNES core. So it's like there's three
bsnes-accuracy PPU threads running just for video.
-----
Oh, just a fair warning ... the hooks for the SGB are a work in
progress.
If anyone is working on higan or a fork and want to do something similar
to it, don't use it as a template, at least not yet.
Right now, higan looks like this:
- Emulator::Video handles the platform→videoRefresh calls
- Emulator::Audio handles the platform→audioSample calls
- each core hard-codes the platform→inputPoll, inputRumble calls
- each core hard-codes calls to path, open, load to process files
- dipSettings and notify are specialty hacks, neither are even hooked
up right now to anything
With the SGB, it's an emulation core inside an emulation core, so
ideally you want to hook all of those functions. Emulator::Video and
Emulator::Audio aren't really abstractions over that, as the GB core
calls them and we have to special case not calling them in SGB mode.
The path, open, load can be implemented without hooks, thanks to the UI
only using one instance of Emulator::Platform for all cores. All we have
to do is override the folder path ID for the "Game Boy.sys" folder, so
that it picks "Super Game Boy.sfc/" and loads its boot ROM instead.
That's just a simple argument to GameBoy::System::load() and we're done.
dipSettings, notify and inputRumble don't matter. But we do also have to
hook inputPoll as well.
The nice idea would be for SuperFamicom::ICD2 to inherit from
Emulator::Platform and provide the desired functions that we need to
overload. After that, we'd just need the GB core to keep an abstraction
over the global Emulator::platform\* handle, to select between the UI
version and the SFC::ICD2 version.
However ... that doesn't work because of Emulator::Video and
Emulator::Audio. They would also have to gain an abstraction over
Emulator::platform\*, and even worse ... you'd have to constantly swap
between the two so that the SFC core uses the UI, and the GB core uses
the ICD2.
And so, for right now, I'm checking Model::SuperGameBoy() -> bool
everywhere, and choosing between the UI and ICD2 targets that way. And
as such, the ICD2 doesn't really need Emulator::Platform inheritance,
although it certainly could do that and just use the functions it needs.
But the SGB is even weirder, because we need additional new signals
beyond just Emulator::Platform, like joypWrite(), etc.
I'd also like to work on the Emulator::Stream for the SGB core. I don't
see why we can't have the GB core create its own stream, and let the
ICD2 just use that instead. We just have to be careful about the ICD2's
CPU soft reset function, to make sure the GB core's Stream object
remains valid. What I think that needs is a way to release an
Emulator::Stream individually, rather than calling
Emulator::Audio::reset() to do it. They are shared\_pointer objects, so
I think if I added a destructor function to remove it from
Emulator::Audio::streams, then that should work.
2017-01-26 01:06:06 +00:00
|
|
|
auto System::load(Emulator::Interface* interface, Model model_, maybe<uint> systemID) -> bool {
|
|
|
|
_model = model_;
|
|
|
|
|
|
|
|
if(model() == Model::GameBoy) {
|
|
|
|
if(auto fp = platform->open(ID::System, "manifest.bml", File::Read, File::Required)) {
|
|
|
|
information.manifest = fp->reads();
|
|
|
|
} else return false;
|
|
|
|
|
|
|
|
auto document = BML::unserialize(information.manifest);
|
|
|
|
if(auto name = document["system/cpu/rom/name"].text()) {
|
|
|
|
if(auto fp = platform->open(ID::System, name, File::Read, File::Required)) {
|
|
|
|
fp->read(bootROM.dmg, 256);
|
|
|
|
}
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
}
|
2012-07-15 09:47:35 +00:00
|
|
|
}
|
Update to v097r12 release.
byuu says:
Nothing WS-related this time.
First, I fixed expansion port device mapping. On first load, it was
mapping the expansion port device too late, so it ended up not taking
effect. I had to spin out the logic for that into
Program::connectDevices(). This was proving to be quite annoying while
testing eBoot (SNES-Hook simulation.)
Second, I fixed the audio->set(Frequency, Latency) functions to take
(uint) parameters from the configuration file, so the weird behavior
around changing settings in the audio panel should hopefully be gone
now.
Third, I rewrote the interface->load,unload functions to call into the
(Emulator)::System::load,unload functions. And I have those call out to
Cartridge::load,unload. Before, this was inverted, and Cartridge::load()
was invoking System::load(), which I felt was kind of backward.
The Super Game Boy really didn't like this change, however. And it took
me a few hours to power through it. Before, I had the Game Boy core
dummying out all the interface->(load,save)Request calls, and having the
SNES core make them for it. This is because the folder paths and IDs
will be different between the two cores.
I've redesigned things so that ICD2's Emulator::Interface overloads
loadRequest and saveRequest, and translates the requests into new
requests for the SuperFamicom core. This allows the Game Boy code to do
its own loading for everything without a bunch of Super Game Boy special
casing, and without any awkwardness around powering on with no cartridge
inserted.
This also lets the SNES side of things simply call into higher-level
GameBoy::interface->load,save(id, stream) functions instead of stabbing
at the raw underlying state inside of various Game Boy core emulation
classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
|
|
|
|
Update to v102r04 release.
byuu says:
Changelog:
- Super Game Boy support is functional once again
- new GameBoy::SuperGameBoyInterface class
- system.(dmg,cgb,sgb) is now Model::(Super)GameBoy(Color) ala the PC
Engine
- merged WonderSwanInterface, WonderSwanColorInterface shared
functions to WonderSwan::Interface
- merged GameBoyInterface, GameBoyColorInterface shared functions to
GameBoy::Interface
- Interface::unload() now calls Interface::save() for Master System,
Game Gear, Mega Drive, PC Engine, SuperGrafx
- PCE: emulated PCE-CD backup RAM; stored per-game as save.ram (2KiB
file)
- this means you can now save your progress in games like Neutopia
- the PCE-CD I/O registers like BRAM write protect are not
emulated yet
- PCE: IRQ sources now hold the IRQ line state, instead of the CPU
holding it
- this fixes most SuperGrafx games, which were fighting over the
VDC IRQ line previously
- PCE: CPU I/O $14xx should return the pending IRQ bits even if IRQs
are disabled
- PCE: VCE and the VDCs now synchronize to each other; fixes pixel
widths in all games
- PCE: greatly increased the accuracy of the VPC priority selection
code (windows may be buggy still)
- HuC6280: PLA, PLX, PLY should set Z, N flags; fixes many game bugs
[Jonas Quinn]
The big thing I wanted to do was enslave the VDC(s) to the VCE. But
unfortunately, I forgot about the asynchronous DMA channels that each
VDC supports, so this isn't going to be possible I'm afraid.
In the most demanding case, Daimakaimura in-game, we're looking at 85fps
on my Xeon E3 1276v3. So ... not great, and we don't even have sound
connected yet.
We are going to have to profile and optimize this code once sound
emulation and save states are in.
Basically, think of it like this: the VCE, VDC0, and VDC1 all have the
same overhead, scheduling wise (which is the bulk of the performance
loss) as the dot-renderer for the SNES core. So it's like there's three
bsnes-accuracy PPU threads running just for video.
-----
Oh, just a fair warning ... the hooks for the SGB are a work in
progress.
If anyone is working on higan or a fork and want to do something similar
to it, don't use it as a template, at least not yet.
Right now, higan looks like this:
- Emulator::Video handles the platform→videoRefresh calls
- Emulator::Audio handles the platform→audioSample calls
- each core hard-codes the platform→inputPoll, inputRumble calls
- each core hard-codes calls to path, open, load to process files
- dipSettings and notify are specialty hacks, neither are even hooked
up right now to anything
With the SGB, it's an emulation core inside an emulation core, so
ideally you want to hook all of those functions. Emulator::Video and
Emulator::Audio aren't really abstractions over that, as the GB core
calls them and we have to special case not calling them in SGB mode.
The path, open, load can be implemented without hooks, thanks to the UI
only using one instance of Emulator::Platform for all cores. All we have
to do is override the folder path ID for the "Game Boy.sys" folder, so
that it picks "Super Game Boy.sfc/" and loads its boot ROM instead.
That's just a simple argument to GameBoy::System::load() and we're done.
dipSettings, notify and inputRumble don't matter. But we do also have to
hook inputPoll as well.
The nice idea would be for SuperFamicom::ICD2 to inherit from
Emulator::Platform and provide the desired functions that we need to
overload. After that, we'd just need the GB core to keep an abstraction
over the global Emulator::platform\* handle, to select between the UI
version and the SFC::ICD2 version.
However ... that doesn't work because of Emulator::Video and
Emulator::Audio. They would also have to gain an abstraction over
Emulator::platform\*, and even worse ... you'd have to constantly swap
between the two so that the SFC core uses the UI, and the GB core uses
the ICD2.
And so, for right now, I'm checking Model::SuperGameBoy() -> bool
everywhere, and choosing between the UI and ICD2 targets that way. And
as such, the ICD2 doesn't really need Emulator::Platform inheritance,
although it certainly could do that and just use the functions it needs.
But the SGB is even weirder, because we need additional new signals
beyond just Emulator::Platform, like joypWrite(), etc.
I'd also like to work on the Emulator::Stream for the SGB core. I don't
see why we can't have the GB core create its own stream, and let the
ICD2 just use that instead. We just have to be careful about the ICD2's
CPU soft reset function, to make sure the GB core's Stream object
remains valid. What I think that needs is a way to release an
Emulator::Stream individually, rather than calling
Emulator::Audio::reset() to do it. They are shared\_pointer objects, so
I think if I added a destructor function to remove it from
Emulator::Audio::streams, then that should work.
2017-01-26 01:06:06 +00:00
|
|
|
if(model() == Model::GameBoyColor) {
|
|
|
|
if(auto fp = platform->open(ID::System, "manifest.bml", File::Read, File::Required)) {
|
|
|
|
information.manifest = fp->reads();
|
|
|
|
} else return false;
|
|
|
|
|
|
|
|
auto document = BML::unserialize(information.manifest);
|
|
|
|
if(auto name = document["system/cpu/rom/name"].text()) {
|
|
|
|
if(auto fp = platform->open(ID::System, name, File::Read, File::Required)) {
|
|
|
|
fp->read(bootROM.cgb, 2048);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if(model() == Model::SuperGameBoy) {
|
|
|
|
if(auto fp = platform->open(systemID(), "manifest.bml", File::Read, File::Required)) {
|
|
|
|
information.manifest = fp->reads();
|
|
|
|
} else return false;
|
|
|
|
|
|
|
|
auto document = BML::unserialize(information.manifest);
|
2018-02-08 10:32:46 +00:00
|
|
|
if(auto name = document["game/memory[1]/name"].text()) {
|
Update to v102r04 release.
byuu says:
Changelog:
- Super Game Boy support is functional once again
- new GameBoy::SuperGameBoyInterface class
- system.(dmg,cgb,sgb) is now Model::(Super)GameBoy(Color) ala the PC
Engine
- merged WonderSwanInterface, WonderSwanColorInterface shared
functions to WonderSwan::Interface
- merged GameBoyInterface, GameBoyColorInterface shared functions to
GameBoy::Interface
- Interface::unload() now calls Interface::save() for Master System,
Game Gear, Mega Drive, PC Engine, SuperGrafx
- PCE: emulated PCE-CD backup RAM; stored per-game as save.ram (2KiB
file)
- this means you can now save your progress in games like Neutopia
- the PCE-CD I/O registers like BRAM write protect are not
emulated yet
- PCE: IRQ sources now hold the IRQ line state, instead of the CPU
holding it
- this fixes most SuperGrafx games, which were fighting over the
VDC IRQ line previously
- PCE: CPU I/O $14xx should return the pending IRQ bits even if IRQs
are disabled
- PCE: VCE and the VDCs now synchronize to each other; fixes pixel
widths in all games
- PCE: greatly increased the accuracy of the VPC priority selection
code (windows may be buggy still)
- HuC6280: PLA, PLX, PLY should set Z, N flags; fixes many game bugs
[Jonas Quinn]
The big thing I wanted to do was enslave the VDC(s) to the VCE. But
unfortunately, I forgot about the asynchronous DMA channels that each
VDC supports, so this isn't going to be possible I'm afraid.
In the most demanding case, Daimakaimura in-game, we're looking at 85fps
on my Xeon E3 1276v3. So ... not great, and we don't even have sound
connected yet.
We are going to have to profile and optimize this code once sound
emulation and save states are in.
Basically, think of it like this: the VCE, VDC0, and VDC1 all have the
same overhead, scheduling wise (which is the bulk of the performance
loss) as the dot-renderer for the SNES core. So it's like there's three
bsnes-accuracy PPU threads running just for video.
-----
Oh, just a fair warning ... the hooks for the SGB are a work in
progress.
If anyone is working on higan or a fork and want to do something similar
to it, don't use it as a template, at least not yet.
Right now, higan looks like this:
- Emulator::Video handles the platform→videoRefresh calls
- Emulator::Audio handles the platform→audioSample calls
- each core hard-codes the platform→inputPoll, inputRumble calls
- each core hard-codes calls to path, open, load to process files
- dipSettings and notify are specialty hacks, neither are even hooked
up right now to anything
With the SGB, it's an emulation core inside an emulation core, so
ideally you want to hook all of those functions. Emulator::Video and
Emulator::Audio aren't really abstractions over that, as the GB core
calls them and we have to special case not calling them in SGB mode.
The path, open, load can be implemented without hooks, thanks to the UI
only using one instance of Emulator::Platform for all cores. All we have
to do is override the folder path ID for the "Game Boy.sys" folder, so
that it picks "Super Game Boy.sfc/" and loads its boot ROM instead.
That's just a simple argument to GameBoy::System::load() and we're done.
dipSettings, notify and inputRumble don't matter. But we do also have to
hook inputPoll as well.
The nice idea would be for SuperFamicom::ICD2 to inherit from
Emulator::Platform and provide the desired functions that we need to
overload. After that, we'd just need the GB core to keep an abstraction
over the global Emulator::platform\* handle, to select between the UI
version and the SFC::ICD2 version.
However ... that doesn't work because of Emulator::Video and
Emulator::Audio. They would also have to gain an abstraction over
Emulator::platform\*, and even worse ... you'd have to constantly swap
between the two so that the SFC core uses the UI, and the GB core uses
the ICD2.
And so, for right now, I'm checking Model::SuperGameBoy() -> bool
everywhere, and choosing between the UI and ICD2 targets that way. And
as such, the ICD2 doesn't really need Emulator::Platform inheritance,
although it certainly could do that and just use the functions it needs.
But the SGB is even weirder, because we need additional new signals
beyond just Emulator::Platform, like joypWrite(), etc.
I'd also like to work on the Emulator::Stream for the SGB core. I don't
see why we can't have the GB core create its own stream, and let the
ICD2 just use that instead. We just have to be careful about the ICD2's
CPU soft reset function, to make sure the GB core's Stream object
remains valid. What I think that needs is a way to release an
Emulator::Stream individually, rather than calling
Emulator::Audio::reset() to do it. They are shared\_pointer objects, so
I think if I added a destructor function to remove it from
Emulator::Audio::streams, then that should work.
2017-01-26 01:06:06 +00:00
|
|
|
if(auto fp = platform->open(systemID(), name, File::Read, File::Required)) {
|
|
|
|
fp->read(bootROM.sgb, 256);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if(!cartridge.load()) return false;
|
Update to v097r12 release.
byuu says:
Nothing WS-related this time.
First, I fixed expansion port device mapping. On first load, it was
mapping the expansion port device too late, so it ended up not taking
effect. I had to spin out the logic for that into
Program::connectDevices(). This was proving to be quite annoying while
testing eBoot (SNES-Hook simulation.)
Second, I fixed the audio->set(Frequency, Latency) functions to take
(uint) parameters from the configuration file, so the weird behavior
around changing settings in the audio panel should hopefully be gone
now.
Third, I rewrote the interface->load,unload functions to call into the
(Emulator)::System::load,unload functions. And I have those call out to
Cartridge::load,unload. Before, this was inverted, and Cartridge::load()
was invoking System::load(), which I felt was kind of backward.
The Super Game Boy really didn't like this change, however. And it took
me a few hours to power through it. Before, I had the Game Boy core
dummying out all the interface->(load,save)Request calls, and having the
SNES core make them for it. This is because the folder paths and IDs
will be different between the two cores.
I've redesigned things so that ICD2's Emulator::Interface overloads
loadRequest and saveRequest, and translates the requests into new
requests for the SuperFamicom core. This allows the Game Boy code to do
its own loading for everything without a bunch of Super Game Boy special
casing, and without any awkwardness around powering on with no cartridge
inserted.
This also lets the SNES side of things simply call into higher-level
GameBoy::interface->load,save(id, stream) functions instead of stabbing
at the raw underlying state inside of various Game Boy core emulation
classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
|
|
|
serializeInit();
|
2017-01-13 01:15:45 +00:00
|
|
|
this->interface = interface;
|
Update to v099r07 release.
byuu says:
Changelog:
- (hopefully) fixed BS Memory and Sufami Turbo slot loading
- ported GB, GBA, WS cores to use nall/vfs
- completely removed loadRequest, saveRequest functionality from
Emulator::Interface and ui-tomoko
- loadRequest(folder) is now load(folder)
- save states now use a shared Emulator::SerializerVersion string
- whenever this is bumped, all older states will break; but this makes
bumping state versions way easier
- also, the version string makes it a lot easier to identify
compatibility windows for save states
- SNES PPU now uses uint16 vram[32768] for memory accesses [hex_usr]
NOTE: Super Game Boy loading is currently broken, and I'm not entirely
sure how to fix it :/
The file loading handoff was -really- complicated, and so I'm kind of
at a loss ... so for now, don't try it.
Everything else should theoretically work, so please report any bugs
you find.
So, this is pretty much it. I'd be very curious to hear feedback from
people who objected to the old nall/stream design, whether they are
happy with the new file loading system or think it could use further
improvements.
The 16-bit VRAM turned out to be a wash on performance (roughly the same
as before. 1fps slower on Zelda 3, 1fps faster on Yoshi's Island.) The
main reason for this was because Yoshi's Island was breaking horribly
until I changed the vramRead, vramWrite functions to take uint15 instead
of uint16.
I suspect the issue is we're using uint16s in some areas now that need
to be uint15, and this game is setting the VRAM address to 0x8000+,
causing us to go out of bounds on memory accesses.
But ... I want to go ahead and do something cute for fun, and just because
we can ... and this new interface is so incredibly perfect for it!! I
want to support an SNES unit with 128KiB of VRAM. Not out of the box,
but as a fun little tweakable thing. The SNES was clearly designed to
support that, they just didn't use big enough VRAM chips, and left one
of the lines disconnected. So ... let's connect it anyway!
In the end, if we design it right, the only code difference should be
one area where we mask by 15-bits instead of by 16-bits.
2016-06-24 12:09:30 +00:00
|
|
|
return _loaded = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
auto System::save() -> void {
|
|
|
|
if(!loaded()) return;
|
|
|
|
cartridge.save();
|
Update to v097r12 release.
byuu says:
Nothing WS-related this time.
First, I fixed expansion port device mapping. On first load, it was
mapping the expansion port device too late, so it ended up not taking
effect. I had to spin out the logic for that into
Program::connectDevices(). This was proving to be quite annoying while
testing eBoot (SNES-Hook simulation.)
Second, I fixed the audio->set(Frequency, Latency) functions to take
(uint) parameters from the configuration file, so the weird behavior
around changing settings in the audio panel should hopefully be gone
now.
Third, I rewrote the interface->load,unload functions to call into the
(Emulator)::System::load,unload functions. And I have those call out to
Cartridge::load,unload. Before, this was inverted, and Cartridge::load()
was invoking System::load(), which I felt was kind of backward.
The Super Game Boy really didn't like this change, however. And it took
me a few hours to power through it. Before, I had the Game Boy core
dummying out all the interface->(load,save)Request calls, and having the
SNES core make them for it. This is because the folder paths and IDs
will be different between the two cores.
I've redesigned things so that ICD2's Emulator::Interface overloads
loadRequest and saveRequest, and translates the requests into new
requests for the SuperFamicom core. This allows the Game Boy code to do
its own loading for everything without a bunch of Super Game Boy special
casing, and without any awkwardness around powering on with no cartridge
inserted.
This also lets the SNES side of things simply call into higher-level
GameBoy::interface->load,save(id, stream) functions instead of stabbing
at the raw underlying state inside of various Game Boy core emulation
classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
auto System::unload() -> void {
|
|
|
|
if(!loaded()) return;
|
|
|
|
cartridge.unload();
|
|
|
|
_loaded = false;
|
2011-01-29 09:48:44 +00:00
|
|
|
}
|
|
|
|
|
2015-11-21 07:36:48 +00:00
|
|
|
auto System::power() -> void {
|
Update to v102r04 release.
byuu says:
Changelog:
- Super Game Boy support is functional once again
- new GameBoy::SuperGameBoyInterface class
- system.(dmg,cgb,sgb) is now Model::(Super)GameBoy(Color) ala the PC
Engine
- merged WonderSwanInterface, WonderSwanColorInterface shared
functions to WonderSwan::Interface
- merged GameBoyInterface, GameBoyColorInterface shared functions to
GameBoy::Interface
- Interface::unload() now calls Interface::save() for Master System,
Game Gear, Mega Drive, PC Engine, SuperGrafx
- PCE: emulated PCE-CD backup RAM; stored per-game as save.ram (2KiB
file)
- this means you can now save your progress in games like Neutopia
- the PCE-CD I/O registers like BRAM write protect are not
emulated yet
- PCE: IRQ sources now hold the IRQ line state, instead of the CPU
holding it
- this fixes most SuperGrafx games, which were fighting over the
VDC IRQ line previously
- PCE: CPU I/O $14xx should return the pending IRQ bits even if IRQs
are disabled
- PCE: VCE and the VDCs now synchronize to each other; fixes pixel
widths in all games
- PCE: greatly increased the accuracy of the VPC priority selection
code (windows may be buggy still)
- HuC6280: PLA, PLX, PLY should set Z, N flags; fixes many game bugs
[Jonas Quinn]
The big thing I wanted to do was enslave the VDC(s) to the VCE. But
unfortunately, I forgot about the asynchronous DMA channels that each
VDC supports, so this isn't going to be possible I'm afraid.
In the most demanding case, Daimakaimura in-game, we're looking at 85fps
on my Xeon E3 1276v3. So ... not great, and we don't even have sound
connected yet.
We are going to have to profile and optimize this code once sound
emulation and save states are in.
Basically, think of it like this: the VCE, VDC0, and VDC1 all have the
same overhead, scheduling wise (which is the bulk of the performance
loss) as the dot-renderer for the SNES core. So it's like there's three
bsnes-accuracy PPU threads running just for video.
-----
Oh, just a fair warning ... the hooks for the SGB are a work in
progress.
If anyone is working on higan or a fork and want to do something similar
to it, don't use it as a template, at least not yet.
Right now, higan looks like this:
- Emulator::Video handles the platform→videoRefresh calls
- Emulator::Audio handles the platform→audioSample calls
- each core hard-codes the platform→inputPoll, inputRumble calls
- each core hard-codes calls to path, open, load to process files
- dipSettings and notify are specialty hacks, neither are even hooked
up right now to anything
With the SGB, it's an emulation core inside an emulation core, so
ideally you want to hook all of those functions. Emulator::Video and
Emulator::Audio aren't really abstractions over that, as the GB core
calls them and we have to special case not calling them in SGB mode.
The path, open, load can be implemented without hooks, thanks to the UI
only using one instance of Emulator::Platform for all cores. All we have
to do is override the folder path ID for the "Game Boy.sys" folder, so
that it picks "Super Game Boy.sfc/" and loads its boot ROM instead.
That's just a simple argument to GameBoy::System::load() and we're done.
dipSettings, notify and inputRumble don't matter. But we do also have to
hook inputPoll as well.
The nice idea would be for SuperFamicom::ICD2 to inherit from
Emulator::Platform and provide the desired functions that we need to
overload. After that, we'd just need the GB core to keep an abstraction
over the global Emulator::platform\* handle, to select between the UI
version and the SFC::ICD2 version.
However ... that doesn't work because of Emulator::Video and
Emulator::Audio. They would also have to gain an abstraction over
Emulator::platform\*, and even worse ... you'd have to constantly swap
between the two so that the SFC core uses the UI, and the GB core uses
the ICD2.
And so, for right now, I'm checking Model::SuperGameBoy() -> bool
everywhere, and choosing between the UI and ICD2 targets that way. And
as such, the ICD2 doesn't really need Emulator::Platform inheritance,
although it certainly could do that and just use the functions it needs.
But the SGB is even weirder, because we need additional new signals
beyond just Emulator::Platform, like joypWrite(), etc.
I'd also like to work on the Emulator::Stream for the SGB core. I don't
see why we can't have the GB core create its own stream, and let the
ICD2 just use that instead. We just have to be careful about the ICD2's
CPU soft reset function, to make sure the GB core's Stream object
remains valid. What I think that needs is a way to release an
Emulator::Stream individually, rather than calling
Emulator::Audio::reset() to do it. They are shared\_pointer objects, so
I think if I added a destructor function to remove it from
Emulator::Audio::streams, then that should work.
2017-01-26 01:06:06 +00:00
|
|
|
if(model() != Model::SuperGameBoy) {
|
Update to v098r06 release.
byuu says:
Changelog:
- emulation cores now refresh video from host thread instead of
cothreads (fix AMD crash)
- SFC: fixed another bug with leap year months in SharpRTC emulation
- SFC: cleaned up camelCase on function names for
armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes
- GB: added MBC1M emulation (requires manually setting mapper=MBC1M in
manifest.bml for now, sorry)
- audio: implemented Emulator::Audio mixer and effects processor
- audio: implemented Emulator::Stream interface
- it is now possible to have more than two audio streams: eg SNES
+ SGB + MSU1 + Voicer-Kun (eventually)
- audio: added reverb delay + reverb level settings; exposed balance
configuration in UI
- video: reworked palette generation to re-enable saturation, gamma,
luminance adjustments
- higan/emulator.cpp is gone since there was nothing left in it
I know you guys are going to say the color adjust/balance/reverb stuff
is pointless. And indeed it mostly is. But I like the idea of allowing
some fun special effects and configurability that isn't system-wide.
Note: there seems to be some kind of added audio lag in the SGB
emulation now, and I don't really understand why. The code should be
effectively identical to what I had before. The only main thing is that
I'm sampling things to 48000hz instead of 32040hz before mixing. There's
no point where I'm intentionally introducing added latency though. I'm
kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be
much appreciated :/
I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as
well, and that would be very bad.
2016-04-22 13:35:51 +00:00
|
|
|
Emulator::video.reset();
|
|
|
|
Emulator::video.setInterface(interface);
|
|
|
|
configureVideoPalette();
|
|
|
|
configureVideoEffects();
|
|
|
|
|
|
|
|
Emulator::audio.reset();
|
|
|
|
Emulator::audio.setInterface(interface);
|
|
|
|
}
|
|
|
|
|
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
2016-07-30 03:56:12 +00:00
|
|
|
scheduler.reset();
|
2010-12-29 11:03:42 +00:00
|
|
|
bus.power();
|
|
|
|
cartridge.power();
|
2010-12-28 01:53:15 +00:00
|
|
|
cpu.power();
|
2012-04-26 10:51:13 +00:00
|
|
|
ppu.power();
|
2011-01-22 08:15:49 +00:00
|
|
|
apu.power();
|
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
2016-07-30 03:56:12 +00:00
|
|
|
scheduler.primary(cpu);
|
2011-01-06 10:16:07 +00:00
|
|
|
|
Update to v097r12 release.
byuu says:
Nothing WS-related this time.
First, I fixed expansion port device mapping. On first load, it was
mapping the expansion port device too late, so it ended up not taking
effect. I had to spin out the logic for that into
Program::connectDevices(). This was proving to be quite annoying while
testing eBoot (SNES-Hook simulation.)
Second, I fixed the audio->set(Frequency, Latency) functions to take
(uint) parameters from the configuration file, so the weird behavior
around changing settings in the audio panel should hopefully be gone
now.
Third, I rewrote the interface->load,unload functions to call into the
(Emulator)::System::load,unload functions. And I have those call out to
Cartridge::load,unload. Before, this was inverted, and Cartridge::load()
was invoking System::load(), which I felt was kind of backward.
The Super Game Boy really didn't like this change, however. And it took
me a few hours to power through it. Before, I had the Game Boy core
dummying out all the interface->(load,save)Request calls, and having the
SNES core make them for it. This is because the folder paths and IDs
will be different between the two cores.
I've redesigned things so that ICD2's Emulator::Interface overloads
loadRequest and saveRequest, and translates the requests into new
requests for the SuperFamicom core. This allows the Game Boy code to do
its own loading for everything without a bunch of Super Game Boy special
casing, and without any awkwardness around powering on with no cartridge
inserted.
This also lets the SNES side of things simply call into higher-level
GameBoy::interface->load,save(id, stream) functions instead of stabbing
at the raw underlying state inside of various Game Boy core emulation
classes. So things are a lot better abstracted now.
2016-02-08 03:17:59 +00:00
|
|
|
_clocksExecuted = 0;
|
2010-12-28 01:53:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
}
|