Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
2018-02-01 08:20:37 +00:00
|
|
|
build := performance
|
2015-12-30 06:41:46 +00:00
|
|
|
include ../nall/GNUmakefile
|
2011-08-18 13:58:27 +00:00
|
|
|
|
2017-09-24 01:01:48 +00:00
|
|
|
binary := application
|
Update to v106r21 release.
byuu says:
Changelog:
- higan: target-tomoko has been renamed to target-higan
- Super Famicom: event has been renamed to
processor(architecture=uPD78214)
- Super Famicom: SNES-EVENT supported once more; under board IDs
EVENT-CC92 and EVENT-PF94
- Super Famicom: SNES-EVENT preliminarily set up to use DIP switch
settings ala the Nintendo Super System (incomplete)
- Super Famicom: MCC PSRAM moved inside the MCU, as it is remappable
- Super Famicom: MCC emulation rewritten from scratch; it is now
vastly more accurate than before
- Super Famicom: added BSC-1A5B9P-01 board definition to database;
corrected BS-MCC-RAM board definition
- Super Famicom: moved SHVC-LN3B-01 RAM outside of
processor(identifier=SDD1)
- higan: when selecting a default game to load for a new system entry,
it will change the system option to match the media type
- higan: the load text box on the system entry window is now editable;
can be used to erase entries
- icarus: fixed bug in Famicom importing
- icarus: importing unappended SNES coprocessor firmware will now
rename the firmware properly
- hiro/GTK,Qt: WM_CLASS is now set correctly in `argv[0]`, so
applications should show “higan”, “icarus” instead of “hiro” now
Note: if you wish to run the BS-X town cartridge, the database currently
lists the download RAM as type “PSRAM”. This needs to be changed to
“RAM” in order to load properly. Otherwise, the emulator will bomb
out on the load window, because BSC-1A5B9P-01 expects PSRAM to always be
present, but it won't find it with the wrong memory type. I'll correct
this in the database in a later release. For now, you can copy the game
portion of the manifest to a new manifest.bml file and drop it into the
gamepak folder until I fix the database.
2018-05-17 03:37:29 +00:00
|
|
|
target := higan
|
2017-01-13 01:15:45 +00:00
|
|
|
objects := libco emulator audio video resource
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v102r05 release.
byuu says:
Changelog:
- higan: added Makefile option,
`build=(release|debug|instrument|optimize)` , defaults to release
- PCE: added preliminary PSG (sound) emulation
The Makefile thing is just to make it easier to build debug releases
without having to hand-edit the Makefile. Just say "gmake build=debug"
and you'll get -g, otherwise you'll get -O3 -s. I'll probably start
adding these build= blocks to my other projects. Or maybe I'll put it
into nall, in which case release will need a different name ... a stable
-01, and a fast -03 mode. I also want to add a mode to generate
profiling information (via gprof.)
Unfortunately, the existing documentation on the PCE's PSG is as
barebones as humanly possible.
Right now, I support waveform mode, direct D/A mode, and noise
generation mode. However for noise, I'm not actually generating a proper
square wave, and I don't know the PRNG algorithm used for choosing the
random values. So for now, I'm just feeding in nall::random() values to
it.
I'm also not sure about the noise mode's frequency counter. Magic Kit is
implying it's 64*~frequency, but that results in an 11-bit period. It
seems only logical that we'd want a 12-bit period. So my guess is that
it's actually 12-bit, and halfway through it alternates between two
randomly generated values every 32 samples, and the two values are
generated every time the period hits zero.
Next up, it's not clear when the period counter is reloaded, either for
the waveform or the noise mode. So for now, when enabling the channel, I
reload the waveform period. And when enabling noise mode, I reload the
noise period. I don't know if you need to do it when writing to the
frequency registers or not.
Next, it's not clear whether the period is a decrement-and-compare, or a
compare-and-decrement, and whether we reload with frequency,
frequency-1, or frequency+1. There's this cryptic note in
pcetext.txt:
> The PSG channel frequency is 12 bits, $001 is the highest frequency,
> $FFF is the next to lowest frequency, and $000 is the lowest frequency.
As best I can tell, he's trying to say that it's decrement-and-compare.
Whatever the case, there's periodic popping noises every few seconds. I
thought it might be because this is the first system with a fractional
sampling rate (~3.57MHz), but rounding the frequency to a whole number
doesn't help at all, and emulator/audio should be able to handle
fractional resampling rates anyway.
The popping noises could also be due to PSG writes being cycle-timed,
and my HuC6280 cycle timings not being very great yet. The PSG has no
kind of interrupts, so I think careful timing is the only way to do
certain things, especially D/A mode.
Next up, I really don't understand the frequency modulation mode at all.
I don't have any idea whatsoever how to support that. It also has a
frequency value that we'll need to understand how the period works and
reloads. Basic idea though is the channel 1 output turns into a value to
modulate channel 0's frequency by, and channel 1's output gets muted.
Next up, I don't know how the volume controls work at all. There's a
master volume left+right, per-channel volume left+right, and per-channel
overall volume. The documentation lists their effects in terms of
decibels. I have no fucking clue how to turn decibels into multiply-by
values. Let alone how to stack THREE levels of audio volume controls
>_>
Next, it looks like the output is always 5-bit unsigned per-channel, but
there's also all the volume adjustments. So I don't know the final
bit-depth of the final output to normalize the value into a signed
floating point value between -1.0 and +1.0. So for now, half the
potential speaker range (anything below zero) isn't used in the
generated output.
As bad as all this sounds, and it is indeed bad ... the audio's about
~75% correct, so you can definitely play games like this, it just won't
be all that much fun.
2017-02-09 20:10:38 +00:00
|
|
|
flags += -I. -I..
|
2011-08-20 14:40:44 +00:00
|
|
|
|
Update to v093r01 release.
byuu says:
Changelog:
- added SA-1 MDR; fixes bug in SD Gundam G-Next where the main
battleship was unable to fire
- added out-of-the-box support for any BSD running Clang 3.3+ (FreeBSD
10+, notably)
- added new video shader, "Display Emulation", which changes the shader
based on the emulated system
- fixed the home button to go to your default library path
- phoenix: Windows port won't send onActivate unless an item is selected
(prevents crashing on pressing enter in file dialog)
- ruby: removed vec4 position from out Vertex {} (helps AMD cards)
- shaders: updated all shaders to use texture() instead of texture2D()
(helps AMD cards)
The "Display Emulation" option works like this: when selected, it tries
to load "<path>/Video Shaders/Emulation/<systemName>.shader/"; otherwise
it falls back to the blur shader. <path> is the usual (next to binary,
then in <config>/higan, then in /usr/share/higan, etc); and <systemName>
is "Famicom", "Super Famicom", "Game Boy", "Game Boy Color", "Game Boy
Advance"
To support BSD, I had to modify the $(platform) variable to
differentiate between Linux and BSD.
As such, the new $(platform) values are:
win -> windows
osx -> macosx
x -> linux or bsd
I am also checking uname -s instead of uname -a now. No reason to
potentially match the hostname to the wrong OS type.
2013-10-21 11:45:39 +00:00
|
|
|
ifeq ($(platform),windows)
|
2017-09-24 01:01:48 +00:00
|
|
|
ifeq ($(binary),application)
|
|
|
|
|
link += -mthreads -lpthread -luuid -lkernel32 -luser32 -lgdi32 -lcomctl32 -lcomdlg32 -lshell32
|
|
|
|
|
link += -Wl,-enable-auto-import
|
|
|
|
|
link += -Wl,-enable-runtime-pseudo-reloc
|
|
|
|
|
else ifeq ($(binary),library)
|
|
|
|
|
link += -shared
|
|
|
|
|
endif
|
|
|
|
|
else ifeq ($(platform),macos)
|
|
|
|
|
ifeq ($(binary),application)
|
|
|
|
|
else ifeq ($(binary),library)
|
|
|
|
|
flags += -fPIC
|
|
|
|
|
link += -dynamiclib
|
Update to v090 release.
byuu says:
Most notably, this release adds Nintendo DS emulation. The Nintendo DS
module was written entirely by Cydrak, so please give him all of the
credit for it. I for one am extremely grateful to be allowed to use his
module in bsnes.
The Nintendo DS emulator's standalone name is dasShiny. You will need
the Nintendo DS firmware, which I cannot provide, in order to use it. It
also cannot (currently?) detect the save type used by NDS games. As
such, manifest.xml files must be created manually for this purpose. The
long-term plan is to create a database of save types for each game.
Also, you will need an analog input device for the touch screen for now
(joypad axes work well.)
There have also been a lot of changes from my end: a unified
manifest.xml format across all systems, major improvements to SPC7110
emulation, enhancements to RTC emulation, MSU1 enhancements, icons in
the file browser list, improvements to SNES coprocessor memory mapping,
cleanups and improvements in the libraries used to build bsnes, etc.
I've also included kaijuu (which allows launching game folders directly
with bsnes) and purify (which allows opening images that are compressed,
have copier headers, and have wrong extensions); both of which are fully
GUI-based.
This release only loads game folders, not files. Use purify to load ROM
files in bsnes.
Note that this will likely be the last release for a long time, and that
I will probably rename the emulator for the next release, due to how
many additional systems it now supports.
2012-08-07 14:08:37 +00:00
|
|
|
endif
|
Update to v096r07 release.
byuu says:
Changelog:
- configuration files are now stored in localpath() instead of configpath()
- Video gamma/saturation/luminance sliders are gone now, sorry
- added Video Filter->Blur Emulation [1]
- added Video Filter->Scanline Emulation [2]
- improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn]
[1] For the Famicom, this does nothing. For the Super Famicom, this
performs horizontal blending for proper pseudo-hires translucency. For
the Game Boy, Game Boy Color, and Game Boy Advance, this performs
interframe blending (each frame is the average of the current and
previous frame), which is important for things like the GBVideoPlayer.
[2] Right now, this only applies to the Super Famicom, but it'll come to
the Famicom in the future. For the Super Famicom, this option doesn't
just add scanlines, it simulates the phosphor decay that's visible in
interlace mode. If you observe an interlaced game like RPM Racing on
a real SNES, you'll notice that even on perfectly still screens, the
image appears to shake. This option emulates that effect.
Note 1: the buffering right now is a little sub-optimal, so there will
be a slight speed hit with this new support. Since the core is now
generating native ARGB8888 colors, it might as well call out to the
interface to lock/unlock/refresh the video, that way it can render
directly to the screen. Although ... that might not be such a hot idea,
since the GBx interframe blending reads from the target buffer, and that
tends to be a catastrophic option for performance.
Note 2: the balanced and performance profiles for the SNES are
completely busted again. This WIP took 6 1/2 hours, and I'm exhausted.
Very much not looking forward to working on those, since those two have
all kinds of fucked up speedup tricks for non-interlaced and/or
non-hires video modes.
Note 3: if you're on Windows and you saved your system folders somewhere
else, now'd be a good time to move them to %localappdata%/higan
2016-01-15 10:06:51 +00:00
|
|
|
else ifneq ($(filter $(platform),linux bsd),)
|
2017-09-24 01:01:48 +00:00
|
|
|
flags += -fopenmp
|
2015-06-12 13:14:38 +00:00
|
|
|
link += -fopenmp
|
2017-09-24 01:01:48 +00:00
|
|
|
ifeq ($(binary),application)
|
|
|
|
|
flags += -march=native
|
|
|
|
|
link += -Wl,-export-dynamic
|
|
|
|
|
link += -lX11 -lXext
|
|
|
|
|
else ifeq ($(binary),library)
|
|
|
|
|
flags += -fPIC
|
|
|
|
|
link += -shared
|
|
|
|
|
endif
|
2010-08-09 13:28:56 +00:00
|
|
|
else
|
2015-12-30 06:41:46 +00:00
|
|
|
$(error "unsupported platform")
|
2010-08-09 13:28:56 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
compile = \
|
|
|
|
|
$(strip \
|
|
|
|
|
$(if $(filter %.c,$<), \
|
2013-03-19 08:48:50 +00:00
|
|
|
$(compiler) $(cflags) $(flags) $1 -c $< -o $@, \
|
2010-08-09 13:28:56 +00:00
|
|
|
$(if $(filter %.cpp,$<), \
|
2013-03-19 08:48:50 +00:00
|
|
|
$(compiler) $(cppflags) $(flags) $1 -c $< -o $@ \
|
2010-08-09 13:28:56 +00:00
|
|
|
) \
|
|
|
|
|
) \
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
%.o: $<; $(call compile)
|
|
|
|
|
|
|
|
|
|
all: build;
|
|
|
|
|
|
2017-01-13 01:15:45 +00:00
|
|
|
obj/libco.o: ../libco/libco.c $(call rwildcard,../libco)
|
|
|
|
|
obj/emulator.o: emulator/emulator.cpp $(call rwildcard,emulator)
|
|
|
|
|
obj/audio.o: audio/audio.cpp $(call rwildcard,audio)
|
|
|
|
|
obj/video.o: video/video.cpp $(call rwildcard,video)
|
|
|
|
|
obj/resource.o: resource/resource.cpp $(call rwildcard,resource)
|
Update to v098r01 release.
byuu says:
Changelog:
- SFC: balanced profile removed
- SFC: performance profile removed
- SFC: code for handling non-threaded CPU, SMP, DSP, PPU removed
- SFC: Coprocessor, Controller (and expansion port) shared Thread code
merged to SFC::Cothread
- Cothread here just means "Thread with CPU affinity" (couldn't think
of a better name, sorry)
- SFC: CPU now has vector<Thread*> coprocessors, peripherals;
- this is the beginning of work to allow expansion port devices to be
dynamically changed at run-time
- ruby: all audio drivers default to 48000hz instead of 22050hz now if
no frequency is assigned
- note: the WASAPI driver can default to whatever the native frequency
is; doesn't have to be 48000hz
- tomoko: removed the ability to change the frequency from the UI (but
it will display the frequency used)
- tomoko: removed the timing settings panel
- the goal is to work toward smooth video via adaptive sync
- the model is broken by not being in control of the audio frequency
anyway
- it's further broken by PAL running at 50hz and WSC running at 75hz
- it was always broken anyway by SNES interlace timing varying from
progressive timing
- higan: audio/ stub created (for now, it's just nall/dsp/ moved here
and included as a header)
- higan: video/ stub created
- higan/GNUmakefile: now includes build rules for essential components
(libco, emulator, audio, video)
The audio changes are in preparation to merge wareya's awesome WASAPI
work without the need for the nall/dsp resampler.
2016-04-09 03:40:12 +00:00
|
|
|
|
2015-12-30 06:41:46 +00:00
|
|
|
ui := target-$(target)
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
include $(ui)/GNUmakefile
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v075 release.
byuu says:
This release brings improved Super Game Boy emulation, the final SHA256
hashes for the DSP-(1,1B,2,3,4) and ST-(0010,0011) coprocessors, user
interface improvements, and major internal code restructuring.
Changelog (since v074):
- completely rewrote memory sub-system to support 1-byte granularity in
XML mapping
- removed Memory inheritance and MMIO class completely, any address can
be mapped to any function now
- SuperFX: removed SuperFXBus : Bus, now implemented manually
- SA-1: removed SA1Bus : Bus, now implemented manually
- entire bus mapping is now static, happens once on cartridge load
- as a result, read/write handlers now handle MMC mapping; slower
average case, far faster worst case
- namespace memory is no more, RAM arrays are stored inside the chips
they are owned by now
- GameBoy: improved CPU HALT emulation, fixes Zelda: Link's Awakening
scrolling
- GameBoy: added serial emulation (cannot connect to another GB yet),
fixes Shin Megami Tensei - Devichil
- GameBoy: improved LCD STAT emulation, fixes Sagaia
- ui: added fullscreen support (F11 key), video settings allows for
three scale settings
- ui: fixed brightness, contrast, gamma, audio volume, input frequency
values on program startup
- ui: since Qt is dead, config file becomes bsnes.cfg once again
- Super Game Boy: you can now load the BIOS without a game inserted to
see a pretty white box
- ui-gameboy: can be built without SNES components now
- libsnes: now a UI target, compile with 'make ui=ui-libsnes'
- libsnes: added WRAM, APURAM, VRAM, OAM, CGRAM access (cheat search,
etc)
- source: removed launcher/, as the Qt port is now gone
- source: Makefile restructuring to better support new ui targets
- source: lots of other internal code cleanup work
2011-01-27 08:52:34 +00:00
|
|
|
clean:
|
Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
2018-02-01 08:20:37 +00:00
|
|
|
$(call rm,out/*)
|
|
|
|
|
$(call rm,obj/*)
|