Update to v087r04 release.
byuu says:
Changelog:
- gameboy/ -> gb/
- GameBoy -> GB
- basic memory map for GBA
- enough code to execute the first BIOS instruction (b 0x68)
I have the code resetting r(15) to 0 on an exception just as a test.
Since that flushes the pipeline, that means we're basically executing "b
0x68" at 8MHz, and nothing else.
... and I am getting __6 motherfucking FPS__ at 4.4GHz on an i7.
Something is seriously, horribly, unfuckingbelievably wrong here, and
I can't figure out what it is.
My *fully complete* ARM core on the ST018 is even less efficient and
runs at 21.47MHz, and yet I get 60fps even after emulating the SNES
CPU+PPU @ 10+MHz each as well.
... I'm stuck. I can't proceed until we figure out what in the holy fuck
is going on here. So ... if anyone can help, please do. If we can't fix
this, the GBA emulation is dead.
I was able to profile on Windows, and I've included that in this WIP
under out/log.txt.
But it looks normal to me. But yeah, there's NO. FUCKING. WAY. This code
should be running this slowly.
2012-03-18 12:35:53 +00:00
|
|
|
#include <gb/gb.hpp>
|
2010-12-28 01:53:15 +00:00
|
|
|
|
|
|
|
#define SYSTEM_CPP
|
2012-04-26 10:51:13 +00:00
|
|
|
namespace GameBoy {
|
2010-12-28 01:53:15 +00:00
|
|
|
|
2011-01-07 11:11:56 +00:00
|
|
|
#include "serialization.cpp"
|
2010-12-28 01:53:15 +00:00
|
|
|
System system;
|
|
|
|
|
2011-01-07 11:11:56 +00:00
|
|
|
void System::run() {
|
|
|
|
scheduler.sync = Scheduler::SynchronizeMode::None;
|
|
|
|
|
|
|
|
scheduler.enter();
|
|
|
|
if(scheduler.exit_reason() == Scheduler::ExitReason::FrameEvent) {
|
2013-12-20 11:40:39 +00:00
|
|
|
interface->videoRefresh(video.palette, ppu.screen, 4 * 160, 160, 144);
|
2011-01-07 11:11:56 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void System::runtosave() {
|
|
|
|
scheduler.sync = Scheduler::SynchronizeMode::CPU;
|
|
|
|
runthreadtosave();
|
|
|
|
|
2012-04-17 12:16:54 +00:00
|
|
|
scheduler.sync = Scheduler::SynchronizeMode::All;
|
2012-04-26 10:51:13 +00:00
|
|
|
scheduler.active_thread = ppu.thread;
|
2011-01-07 11:11:56 +00:00
|
|
|
runthreadtosave();
|
2012-04-17 12:16:54 +00:00
|
|
|
|
|
|
|
scheduler.sync = Scheduler::SynchronizeMode::All;
|
|
|
|
scheduler.active_thread = apu.thread;
|
|
|
|
runthreadtosave();
|
|
|
|
|
|
|
|
scheduler.sync = Scheduler::SynchronizeMode::None;
|
2011-01-07 11:11:56 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void System::runthreadtosave() {
|
|
|
|
while(true) {
|
|
|
|
scheduler.enter();
|
|
|
|
if(scheduler.exit_reason() == Scheduler::ExitReason::SynchronizeEvent) break;
|
|
|
|
if(scheduler.exit_reason() == Scheduler::ExitReason::FrameEvent) {
|
2013-12-20 11:40:39 +00:00
|
|
|
interface->videoRefresh(video.palette, ppu.screen, 4 * 160, 160, 144);
|
2011-01-07 11:11:56 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-09-15 12:41:49 +00:00
|
|
|
void System::init() {
|
2012-07-15 09:47:35 +00:00
|
|
|
assert(interface != nullptr);
|
2010-12-28 01:53:15 +00:00
|
|
|
}
|
|
|
|
|
2011-10-27 00:00:17 +00:00
|
|
|
void System::load(Revision revision) {
|
|
|
|
this->revision = revision;
|
2011-01-29 09:48:44 +00:00
|
|
|
serialize_init();
|
2012-07-15 09:47:35 +00:00
|
|
|
if(revision == Revision::SuperGameBoy) return; //Super Famicom core loads boot ROM for SGB
|
|
|
|
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
string manifest = string::read({interface->path(ID::System), "manifest.bml"});
|
Update to v094r17 release.
byuu says:
This updates higan to use the new Markup::Node changes. This is a really
big change, and one slight typo anywhere could break certain classes of
games from playing.
I don't have ananke hooked up again yet, so I don't have the ability to
test this much. If anyone with some v094 game folders wouldn't mind
testing, I'd help out a great deal.
I'm most concerned about testing one of each SNES special chip game.
Most notably, systems like the SA-1, HitachiDSP and NEC-DSP were using
the fancier lookups, eg node["rom[0]/name"], which I had to convert to
a rather ugly node["rom"].at(0)["name"], which I'm fairly confident
won't work. I'm going to blame that on the fumes from the shelves I just
stained >.> Might work with node.find("rom[0]/name")(0) though ...? But
so ugly ... ugh.
That aside, this WIP adds the accuracy-PPU inlining, so the accuracy
profile should run around 7.5% faster than before.
2015-05-02 13:05:46 +00:00
|
|
|
auto document = BML::unserialize(manifest);
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
|
Update to v094r17 release.
byuu says:
This updates higan to use the new Markup::Node changes. This is a really
big change, and one slight typo anywhere could break certain classes of
games from playing.
I don't have ananke hooked up again yet, so I don't have the ability to
test this much. If anyone with some v094 game folders wouldn't mind
testing, I'd help out a great deal.
I'm most concerned about testing one of each SNES special chip game.
Most notably, systems like the SA-1, HitachiDSP and NEC-DSP were using
the fancier lookups, eg node["rom[0]/name"], which I had to convert to
a rather ugly node["rom"].at(0)["name"], which I'm fairly confident
won't work. I'm going to blame that on the fumes from the shelves I just
stained >.> Might work with node.find("rom[0]/name")(0) though ...? But
so ugly ... ugh.
That aside, this WIP adds the accuracy-PPU inlining, so the accuracy
profile should run around 7.5% faster than before.
2015-05-02 13:05:46 +00:00
|
|
|
auto bootROM = document["system/cpu/rom/name"].text();
|
2012-07-15 09:47:35 +00:00
|
|
|
interface->loadRequest(
|
|
|
|
revision == Revision::GameBoy ? ID::GameBoyBootROM : ID::GameBoyColorBootROM,
|
Update to v094r17 release.
byuu says:
This updates higan to use the new Markup::Node changes. This is a really
big change, and one slight typo anywhere could break certain classes of
games from playing.
I don't have ananke hooked up again yet, so I don't have the ability to
test this much. If anyone with some v094 game folders wouldn't mind
testing, I'd help out a great deal.
I'm most concerned about testing one of each SNES special chip game.
Most notably, systems like the SA-1, HitachiDSP and NEC-DSP were using
the fancier lookups, eg node["rom[0]/name"], which I had to convert to
a rather ugly node["rom"].at(0)["name"], which I'm fairly confident
won't work. I'm going to blame that on the fumes from the shelves I just
stained >.> Might work with node.find("rom[0]/name")(0) though ...? But
so ugly ... ugh.
That aside, this WIP adds the accuracy-PPU inlining, so the accuracy
profile should run around 7.5% faster than before.
2015-05-02 13:05:46 +00:00
|
|
|
bootROM
|
2012-07-15 09:47:35 +00:00
|
|
|
);
|
Update to v094r17 release.
byuu says:
This updates higan to use the new Markup::Node changes. This is a really
big change, and one slight typo anywhere could break certain classes of
games from playing.
I don't have ananke hooked up again yet, so I don't have the ability to
test this much. If anyone with some v094 game folders wouldn't mind
testing, I'd help out a great deal.
I'm most concerned about testing one of each SNES special chip game.
Most notably, systems like the SA-1, HitachiDSP and NEC-DSP were using
the fancier lookups, eg node["rom[0]/name"], which I had to convert to
a rather ugly node["rom"].at(0)["name"], which I'm fairly confident
won't work. I'm going to blame that on the fumes from the shelves I just
stained >.> Might work with node.find("rom[0]/name")(0) though ...? But
so ugly ... ugh.
That aside, this WIP adds the accuracy-PPU inlining, so the accuracy
profile should run around 7.5% faster than before.
2015-05-02 13:05:46 +00:00
|
|
|
if(!file::exists({interface->path(ID::System), bootROM})) {
|
Update to v092 release.
In the release thread, byuu says:
The first official release of higan has been posted. higan is the
new name for bsnes, and it continues with the latter's version
numbering.
Note that as of now, bsnes still exists. It's a module distributed
inside of higan. bsnes is now specific to my SNES emulator.
Due to last minute changes to the emulator interface, and missing
support in ananke, I wasn't able to include Cydrak's Nintendo DS
emulator dasShiny in this build, but I hope to do so in the next
release.
http://code.google.com/p/higan/downloads/list
For both new and experienced users, please read the higan user guide
first:
http://byuu.org/higan/user-guide
In the v091 WIP thread, byuu says:
r15->r16:
- BS-X MaskROM handling (partial ... need to split bsx/flash away
from sfc/chip, restructure code - it requires tagging the base
cart markup for now, but it needs to parse the slotted cart
markup)
- phoenixflags / phoenixlink += -m32
- nall/sort stability
- if(input.poll(scancode[activeScancode]) == false) return;
- MSU1 / USART need to use interface->path(1)
- MSU1 needs to use Markup::Document, not XML::Document
- case-insensitive folder listings
- remove nall/emulation/system.hpp files (move to ananke)
- remove rom/ram id= checks with indexing
X have cores ask for manifest.bml (skipped for v092's release, too
big a change)
- rename compatibility profile to balanced (so people don't assume
it has better compatibility than accuracy)
2013-01-14 12:10:20 +00:00
|
|
|
interface->notify("Error: required Game Boy firmware boot.rom not found.\n");
|
2012-07-15 09:47:35 +00:00
|
|
|
}
|
2011-01-29 09:48:44 +00:00
|
|
|
}
|
|
|
|
|
2010-12-28 01:53:15 +00:00
|
|
|
void System::power() {
|
2010-12-29 11:03:42 +00:00
|
|
|
bus.power();
|
|
|
|
cartridge.power();
|
2010-12-28 01:53:15 +00:00
|
|
|
cpu.power();
|
2012-04-26 10:51:13 +00:00
|
|
|
ppu.power();
|
2011-01-22 08:15:49 +00:00
|
|
|
apu.power();
|
2010-12-28 06:03:02 +00:00
|
|
|
scheduler.init();
|
2011-01-06 10:16:07 +00:00
|
|
|
|
2011-01-07 11:11:56 +00:00
|
|
|
clocks_executed = 0;
|
2010-12-28 01:53:15 +00:00
|
|
|
}
|
|
|
|
|
Update to v087r28 release.
byuu says:
Be sure to run make install, and move required images to their appropriate system profile folders.
I still have no warnings in place if those images aren't present.
Changelog:
- OBJ mosaic should hopefully be emulated correctly now (thanks to krom
and Cydrak for testing the hardware behavior)
- emulated dummy serial registers, fixes Sonic Advance (you may still
need to specify 512KB FlashROM with an appropriate ID, I used
Panaonic's)
- GBA core exits scheduler (PPU thread) and calls
interface->videoRefresh() from main thread (not required, just nice)
- SRAM, FRAM, EEPROM and FlashROM initialized to 0xFF if it does not
exist (probably not needed, but FlashROM likes to reset to 0xFF
anyway)
- GBA manifest.xml for file-mode will now use "gamename.xml" instead of
"gamename.gba.xml"
- started renaming "NES" to "Famicom" and "SNES" to "Super Famicom" in
the GUI (may or may not change source code in the long-term)
- removed target-libsnes/
- added profile/
Profiles are the major new feature. So far we have:
Famicom.sys/{nothing (yet?)}
Super Famicom.sys/{ipl.rom}
Game Boy.sys/{boot.rom}
Game Boy Color.sys/{boot.rom}
Game Boy Advance.sys/{bios.rom[not included]}
Super Game Boy.sfc/{boot.rom,program.rom[not included]}
BS-X Satellaview.sfc/{program.rom,bsx.ram,bsx.pram}
Sufami Turbo.sfc/{program.rom}
The SGB, BSX and ST cartridges ask you to load GB, BS or ST cartridges
directly now. No slot loader for them. So the obvious downsides: you
can't quickly pick between different SGB BIOSes, but why would you want
to? Just use SGB2/JP. It's still possible, so I'll sacrifice a little
complexity for a rare case to make it a lot easier for the more common
case. ST cartridges currently won't let you load the secondary slot.
BS-X Town cart is the only useful game to load with nothing in the slot,
but only barely, since games are all seeded on flash and not on PSRAM
images. We can revisit a way to boot the BIOS directly if and when we
get the satellite uplink emulated and data can be downloaded onto the
PSRAM :P BS-X slotted cartridges still require the secondary slot.
My plan for BS-X slotted cartridges is to require a manifest.xml to
specify that it has the BS-X slot present. Otherwise, we have to load
the ROM into the SNES cartridge class, and parse its header before we
can find out if it has one. Screw that. If it's in the XML, I can tell
before loading the ROM if I need to present you with an optional slot
loading dialog. I will probably do something similar for Sufami Turbo.
Not all games even work with a secondary slot, so why ask you to load
a second slot for them? Let the XML request a second slot. A complete
Sufami Turbo ROM set will be trivial anyway. Not sure how I want to do
the sub dialog yet. We want basic file loading, but we don't want it to
look like the dialog 'didn't do anything' if it pops back open
immediately again. Maybe change the background color of the dialog to
a darker gray? Tacky, but it'd give you the visual cue without the need
for some subtle text changes.
2012-04-18 13:58:04 +00:00
|
|
|
System::System() {
|
2013-05-05 09:21:30 +00:00
|
|
|
for(auto& byte : bootROM.dmg) byte = 0;
|
|
|
|
for(auto& byte : bootROM.sgb) byte = 0;
|
|
|
|
for(auto& byte : bootROM.cgb) byte = 0;
|
Update to v087r28 release.
byuu says:
Be sure to run make install, and move required images to their appropriate system profile folders.
I still have no warnings in place if those images aren't present.
Changelog:
- OBJ mosaic should hopefully be emulated correctly now (thanks to krom
and Cydrak for testing the hardware behavior)
- emulated dummy serial registers, fixes Sonic Advance (you may still
need to specify 512KB FlashROM with an appropriate ID, I used
Panaonic's)
- GBA core exits scheduler (PPU thread) and calls
interface->videoRefresh() from main thread (not required, just nice)
- SRAM, FRAM, EEPROM and FlashROM initialized to 0xFF if it does not
exist (probably not needed, but FlashROM likes to reset to 0xFF
anyway)
- GBA manifest.xml for file-mode will now use "gamename.xml" instead of
"gamename.gba.xml"
- started renaming "NES" to "Famicom" and "SNES" to "Super Famicom" in
the GUI (may or may not change source code in the long-term)
- removed target-libsnes/
- added profile/
Profiles are the major new feature. So far we have:
Famicom.sys/{nothing (yet?)}
Super Famicom.sys/{ipl.rom}
Game Boy.sys/{boot.rom}
Game Boy Color.sys/{boot.rom}
Game Boy Advance.sys/{bios.rom[not included]}
Super Game Boy.sfc/{boot.rom,program.rom[not included]}
BS-X Satellaview.sfc/{program.rom,bsx.ram,bsx.pram}
Sufami Turbo.sfc/{program.rom}
The SGB, BSX and ST cartridges ask you to load GB, BS or ST cartridges
directly now. No slot loader for them. So the obvious downsides: you
can't quickly pick between different SGB BIOSes, but why would you want
to? Just use SGB2/JP. It's still possible, so I'll sacrifice a little
complexity for a rare case to make it a lot easier for the more common
case. ST cartridges currently won't let you load the secondary slot.
BS-X Town cart is the only useful game to load with nothing in the slot,
but only barely, since games are all seeded on flash and not on PSRAM
images. We can revisit a way to boot the BIOS directly if and when we
get the satellite uplink emulated and data can be downloaded onto the
PSRAM :P BS-X slotted cartridges still require the secondary slot.
My plan for BS-X slotted cartridges is to require a manifest.xml to
specify that it has the BS-X slot present. Otherwise, we have to load
the ROM into the SNES cartridge class, and parse its header before we
can find out if it has one. Screw that. If it's in the XML, I can tell
before loading the ROM if I need to present you with an optional slot
loading dialog. I will probably do something similar for Sufami Turbo.
Not all games even work with a secondary slot, so why ask you to load
a second slot for them? Let the XML request a second slot. A complete
Sufami Turbo ROM set will be trivial anyway. Not sure how I want to do
the sub dialog yet. We want basic file loading, but we don't want it to
look like the dialog 'didn't do anything' if it pops back open
immediately again. Maybe change the background color of the dialog to
a darker gray? Tacky, but it'd give you the visual cue without the need
for some subtle text changes.
2012-04-18 13:58:04 +00:00
|
|
|
}
|
|
|
|
|
2010-12-28 01:53:15 +00:00
|
|
|
}
|