bsnes/higan/target-higan/settings/audio.cpp

86 lines
2.8 KiB
C++
Raw Normal View History

Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
AudioSettings::AudioSettings(TabFrame* parent) : TabFrameItem(parent) {
setIcon(Icon::Device::Speaker);
Update to v094r23 release. byuu says: The library window is gone, and replaced with hiro::BrowserWindow::openFolder(). This gives navigation capabilities to game loading, and it also completes our slotted cart selection code. As an added bonus, it's less code this way, too. I also set the window size to consistent sizes between all emulated systems, so that switching between SFC and GB don't cause the window size to keep changing, and so that the scaling size is consistent (eg at normal scale, GB @ 3x is closer to SNES @ 2x.) This means black borders in GB/GBA mode, but it doesn't look that bad, and it's not like many people ever use these modes anyway. Finally, added the placeholder tabs for video, audio and timing. I don't intend to add the timing calculator code to v095 (it might be better as a separate tool), but I'll add the ability to set video/audio rates, at least. Glitch 1: despite selecting the first item in the BrowserDialog list, if you press enter when the window appears, it doesn't activate the item until you press an arrow key first. Glitch 2: in Game Boy mode, if you set the 4x window size, it's not honoring the full requested height because the viewport is smaller than the window. 8+ years of trying to get GTK+ and Qt to simply set the god damned window size I ask for, and I still can't get them to do it reliably. Remaining issues: - finish configuration panels (video, audio, timing) - fix ruby driver compilation on Windows - add DIP switch selection window (NSS) [I may end up punting this one to v096]
2015-05-30 11:39:09 +00:00
setText("Audio");
layout.setMargin(5);
Update to v103r18 release. byuu says: Changelog: - tomoko: improved handling of changing audio devices on the audio settings panel - ruby/audio/wasapi: added device enumeration and selection support¹ - ruby/audio/wasapi: release property store handle from audio device - ruby/audio/wasapi: fix exclusive mode buffer filling - ruby/video/glx2: ported to new API -- tested and confirmed working great² - ruby/video/sdl: fixed initialization -- tested and confirmed working on FreeBSD now³ - ruby/video/xv: ported to new API -- tested and mostly working great, sans fullscreen mode⁴ Errata: - accidentally changed "Driver Settings" label to "Driver" on the audio settings tab because I deleted the line and forgot the "Settings" part - need to use "return initialize();" from setDevice() in the WASAPI driver, instead of "return true;", so device selection is currently not functioning in this WIP for said driver ¹: for now, this will likely end up selecting the first available endpoint device, which is probably wrong. I need to come up with a system to expose good 'default values' when selecting new audio drivers, or changing audio device settings. ²: glx2 is a fallback driver for system with only OpenGL 2.0 and no OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards. ³: although I really should track down why InputManager::poll() is crashing the emulator when Video::ready() returns false ... ⁴: really bizarrely, when entering fullscreen mode, it looks like the image was a triangle strip, and the bottom right triange is missing, and the top left triangle skews the entire image into it. I'm suspecting this is a Radeon driver bug when trying to create a 2560x1600 X-Video surface. The glitch persists when exiting fullscreen, too. If anyone can test the X-Video driver on their Linux/BSD system, it'd be appreciated. If it's just my video card, I'll ignore it. If not, hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
driverLabel.setFont(Font().setBold()).setText("Driver");
deviceLabel.setText("Device:");
Update to v104r06 release. byuu says: Changelog: - gba,ws: removed Thread::step() override¹ - processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not by one² - tomoko: created new initialize(Video,Audio,Input)Driver() functions³ - ruby/audio: split Audio::information into Audio::available(Devices,Frequencies,Latencies,Channels)³ - ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)() functions for consistency with other cores ¹: this should hopefully fix GBA Pokemon Pinball. Thanks to SuperMikeMan for pointing out the underlying cause. ²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more games. ³: this is the big change: so there was a problem with WASAPI where you might change your device under the audio settings panel. And your new device may not support the frequency that your old device used. This would end up not updating the frequency, and the pitch would be distorted. The old Audio::information() couldn't tell you what frequencies, latencies, or channels were available for all devices simultaneously, so I had to split them up. The new initializeAudioDriver() function validates you have a correct driver, or it defaults to none. Then it validates a correct device name, or it defaults to the first entry in the list. Then it validates a correct frequency, or defaults to the first in the list. Then finally it validates a correct latency, or defaults to the first in the list. In this way ... we have a clear path now with no API changes required to select default devices, frequencies, latencies, channel counts: they need to be the first items in their respective lists. So, what we need to do now is go through and for every audio driver that enumerates devices, we need to make sure the default device gets added to the top of the list. I'm ... not really sure how to do this with most drivers, so this is definitely going to take some time. Also, when you change a device, initializeAudioDriver() is called again, so if it's a bad device, it will disable the audio driver instead of continuing to send samples at it and hoping that the driver blocked those API calls when it failed to initialize properly. Now then ... since it was a decently-sized API change, it's possible I've broken compilation of the Linux drivers, so please report any compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
deviceList.onChange([&] {
settings["Audio/Device"].setValue(deviceList.selected().text());
program->initializeAudioDriver();
updateDevice();
});
Update to v103r18 release. byuu says: Changelog: - tomoko: improved handling of changing audio devices on the audio settings panel - ruby/audio/wasapi: added device enumeration and selection support¹ - ruby/audio/wasapi: release property store handle from audio device - ruby/audio/wasapi: fix exclusive mode buffer filling - ruby/video/glx2: ported to new API -- tested and confirmed working great² - ruby/video/sdl: fixed initialization -- tested and confirmed working on FreeBSD now³ - ruby/video/xv: ported to new API -- tested and mostly working great, sans fullscreen mode⁴ Errata: - accidentally changed "Driver Settings" label to "Driver" on the audio settings tab because I deleted the line and forgot the "Settings" part - need to use "return initialize();" from setDevice() in the WASAPI driver, instead of "return true;", so device selection is currently not functioning in this WIP for said driver ¹: for now, this will likely end up selecting the first available endpoint device, which is probably wrong. I need to come up with a system to expose good 'default values' when selecting new audio drivers, or changing audio device settings. ²: glx2 is a fallback driver for system with only OpenGL 2.0 and no OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards. ³: although I really should track down why InputManager::poll() is crashing the emulator when Video::ready() returns false ... ⁴: really bizarrely, when entering fullscreen mode, it looks like the image was a triangle strip, and the bottom right triange is missing, and the top left triangle skews the entire image into it. I'm suspecting this is a Radeon driver bug when trying to create a 2560x1600 X-Video surface. The glitch persists when exiting fullscreen, too. If anyone can test the X-Video driver on their Linux/BSD system, it'd be appreciated. If it's just my video card, I'll ignore it. If not, hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
Update to v104r06 release. byuu says: Changelog: - gba,ws: removed Thread::step() override¹ - processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not by one² - tomoko: created new initialize(Video,Audio,Input)Driver() functions³ - ruby/audio: split Audio::information into Audio::available(Devices,Frequencies,Latencies,Channels)³ - ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)() functions for consistency with other cores ¹: this should hopefully fix GBA Pokemon Pinball. Thanks to SuperMikeMan for pointing out the underlying cause. ²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more games. ³: this is the big change: so there was a problem with WASAPI where you might change your device under the audio settings panel. And your new device may not support the frequency that your old device used. This would end up not updating the frequency, and the pitch would be distorted. The old Audio::information() couldn't tell you what frequencies, latencies, or channels were available for all devices simultaneously, so I had to split them up. The new initializeAudioDriver() function validates you have a correct driver, or it defaults to none. Then it validates a correct device name, or it defaults to the first entry in the list. Then it validates a correct frequency, or defaults to the first in the list. Then finally it validates a correct latency, or defaults to the first in the list. In this way ... we have a clear path now with no API changes required to select default devices, frequencies, latencies, channel counts: they need to be the first items in their respective lists. So, what we need to do now is go through and for every audio driver that enumerates devices, we need to make sure the default device gets added to the top of the list. I'm ... not really sure how to do this with most drivers, so this is definitely going to take some time. Also, when you change a device, initializeAudioDriver() is called again, so if it's a bad device, it will disable the audio driver instead of continuing to send samples at it and hoping that the driver blocked those API calls when it failed to initialize properly. Now then ... since it was a decently-sized API change, it's possible I've broken compilation of the Linux drivers, so please report any compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
for(auto& device : audio->availableDevices()) {
Update to v103r18 release. byuu says: Changelog: - tomoko: improved handling of changing audio devices on the audio settings panel - ruby/audio/wasapi: added device enumeration and selection support¹ - ruby/audio/wasapi: release property store handle from audio device - ruby/audio/wasapi: fix exclusive mode buffer filling - ruby/video/glx2: ported to new API -- tested and confirmed working great² - ruby/video/sdl: fixed initialization -- tested and confirmed working on FreeBSD now³ - ruby/video/xv: ported to new API -- tested and mostly working great, sans fullscreen mode⁴ Errata: - accidentally changed "Driver Settings" label to "Driver" on the audio settings tab because I deleted the line and forgot the "Settings" part - need to use "return initialize();" from setDevice() in the WASAPI driver, instead of "return true;", so device selection is currently not functioning in this WIP for said driver ¹: for now, this will likely end up selecting the first available endpoint device, which is probably wrong. I need to come up with a system to expose good 'default values' when selecting new audio drivers, or changing audio device settings. ²: glx2 is a fallback driver for system with only OpenGL 2.0 and no OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards. ³: although I really should track down why InputManager::poll() is crashing the emulator when Video::ready() returns false ... ⁴: really bizarrely, when entering fullscreen mode, it looks like the image was a triangle strip, and the bottom right triange is missing, and the top left triangle skews the entire image into it. I'm suspecting this is a Radeon driver bug when trying to create a 2560x1600 X-Video surface. The glitch persists when exiting fullscreen, too. If anyone can test the X-Video driver on their Linux/BSD system, it'd be appreciated. If it's just my video card, I'll ignore it. If not, hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
deviceList.append(ComboButtonItem().setText(device));
if(device == settings["Audio/Device"].text()) {
deviceList.item(deviceList.itemCount() - 1).setSelected();
}
}
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
frequencyLabel.setText("Frequency:");
Update to v104r06 release. byuu says: Changelog: - gba,ws: removed Thread::step() override¹ - processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not by one² - tomoko: created new initialize(Video,Audio,Input)Driver() functions³ - ruby/audio: split Audio::information into Audio::available(Devices,Frequencies,Latencies,Channels)³ - ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)() functions for consistency with other cores ¹: this should hopefully fix GBA Pokemon Pinball. Thanks to SuperMikeMan for pointing out the underlying cause. ²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more games. ³: this is the big change: so there was a problem with WASAPI where you might change your device under the audio settings panel. And your new device may not support the frequency that your old device used. This would end up not updating the frequency, and the pitch would be distorted. The old Audio::information() couldn't tell you what frequencies, latencies, or channels were available for all devices simultaneously, so I had to split them up. The new initializeAudioDriver() function validates you have a correct driver, or it defaults to none. Then it validates a correct device name, or it defaults to the first entry in the list. Then it validates a correct frequency, or defaults to the first in the list. Then finally it validates a correct latency, or defaults to the first in the list. In this way ... we have a clear path now with no API changes required to select default devices, frequencies, latencies, channel counts: they need to be the first items in their respective lists. So, what we need to do now is go through and for every audio driver that enumerates devices, we need to make sure the default device gets added to the top of the list. I'm ... not really sure how to do this with most drivers, so this is definitely going to take some time. Also, when you change a device, initializeAudioDriver() is called again, so if it's a bad device, it will disable the audio driver instead of continuing to send samples at it and hoping that the driver blocked those API calls when it failed to initialize properly. Now then ... since it was a decently-sized API change, it's possible I've broken compilation of the Linux drivers, so please report any compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
frequencyList.onChange([&] {
settings["Audio/Frequency"].setValue(frequencyList.selected().text());
program->updateAudioDriver();
});
latencyLabel.setText("Latency:");
Update to v104r06 release. byuu says: Changelog: - gba,ws: removed Thread::step() override¹ - processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not by one² - tomoko: created new initialize(Video,Audio,Input)Driver() functions³ - ruby/audio: split Audio::information into Audio::available(Devices,Frequencies,Latencies,Channels)³ - ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)() functions for consistency with other cores ¹: this should hopefully fix GBA Pokemon Pinball. Thanks to SuperMikeMan for pointing out the underlying cause. ²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more games. ³: this is the big change: so there was a problem with WASAPI where you might change your device under the audio settings panel. And your new device may not support the frequency that your old device used. This would end up not updating the frequency, and the pitch would be distorted. The old Audio::information() couldn't tell you what frequencies, latencies, or channels were available for all devices simultaneously, so I had to split them up. The new initializeAudioDriver() function validates you have a correct driver, or it defaults to none. Then it validates a correct device name, or it defaults to the first entry in the list. Then it validates a correct frequency, or defaults to the first in the list. Then finally it validates a correct latency, or defaults to the first in the list. In this way ... we have a clear path now with no API changes required to select default devices, frequencies, latencies, channel counts: they need to be the first items in their respective lists. So, what we need to do now is go through and for every audio driver that enumerates devices, we need to make sure the default device gets added to the top of the list. I'm ... not really sure how to do this with most drivers, so this is definitely going to take some time. Also, when you change a device, initializeAudioDriver() is called again, so if it's a bad device, it will disable the audio driver instead of continuing to send samples at it and hoping that the driver blocked those API calls when it failed to initialize properly. Now then ... since it was a decently-sized API change, it's possible I've broken compilation of the Linux drivers, so please report any compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
latencyList.onChange([&] {
settings["Audio/Latency"].setValue(latencyList.selected().text());
program->updateAudioDriver();
});
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
exclusiveMode.setText("Exclusive mode");
Update to v104r06 release. byuu says: Changelog: - gba,ws: removed Thread::step() override¹ - processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not by one² - tomoko: created new initialize(Video,Audio,Input)Driver() functions³ - ruby/audio: split Audio::information into Audio::available(Devices,Frequencies,Latencies,Channels)³ - ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)() functions for consistency with other cores ¹: this should hopefully fix GBA Pokemon Pinball. Thanks to SuperMikeMan for pointing out the underlying cause. ²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more games. ³: this is the big change: so there was a problem with WASAPI where you might change your device under the audio settings panel. And your new device may not support the frequency that your old device used. This would end up not updating the frequency, and the pitch would be distorted. The old Audio::information() couldn't tell you what frequencies, latencies, or channels were available for all devices simultaneously, so I had to split them up. The new initializeAudioDriver() function validates you have a correct driver, or it defaults to none. Then it validates a correct device name, or it defaults to the first entry in the list. Then it validates a correct frequency, or defaults to the first in the list. Then finally it validates a correct latency, or defaults to the first in the list. In this way ... we have a clear path now with no API changes required to select default devices, frequencies, latencies, channel counts: they need to be the first items in their respective lists. So, what we need to do now is go through and for every audio driver that enumerates devices, we need to make sure the default device gets added to the top of the list. I'm ... not really sure how to do this with most drivers, so this is definitely going to take some time. Also, when you change a device, initializeAudioDriver() is called again, so if it's a bad device, it will disable the audio driver instead of continuing to send samples at it and hoping that the driver blocked those API calls when it failed to initialize properly. Now then ... since it was a decently-sized API change, it's possible I've broken compilation of the Linux drivers, so please report any compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
exclusiveMode.setChecked(settings["Audio/Exclusive"].boolean()).onToggle([&] {
settings["Audio/Exclusive"].setValue(exclusiveMode.checked());
program->updateAudioDriver();
});
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
effectsLabel.setFont(Font().setBold()).setText("Effects");
volumeLabel.setText("Volume:");
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
volumeValue.setAlignment(0.5);
volumeSlider.setLength(201).setPosition(settings["Audio/Volume"].natural()).onChange([&] { updateEffects(); });
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
balanceLabel.setText("Balance:");
balanceValue.setAlignment(0.5);
balanceSlider.setLength(101).setPosition(settings["Audio/Balance"].natural()).onChange([&] { updateEffects(); });
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
reverbEnable.setText("Reverb").setChecked(settings["Audio/Reverb/Enable"].boolean()).onToggle([&] { updateEffects(); });
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
Update to v103r18 release. byuu says: Changelog: - tomoko: improved handling of changing audio devices on the audio settings panel - ruby/audio/wasapi: added device enumeration and selection support¹ - ruby/audio/wasapi: release property store handle from audio device - ruby/audio/wasapi: fix exclusive mode buffer filling - ruby/video/glx2: ported to new API -- tested and confirmed working great² - ruby/video/sdl: fixed initialization -- tested and confirmed working on FreeBSD now³ - ruby/video/xv: ported to new API -- tested and mostly working great, sans fullscreen mode⁴ Errata: - accidentally changed "Driver Settings" label to "Driver" on the audio settings tab because I deleted the line and forgot the "Settings" part - need to use "return initialize();" from setDevice() in the WASAPI driver, instead of "return true;", so device selection is currently not functioning in this WIP for said driver ¹: for now, this will likely end up selecting the first available endpoint device, which is probably wrong. I need to come up with a system to expose good 'default values' when selecting new audio drivers, or changing audio device settings. ²: glx2 is a fallback driver for system with only OpenGL 2.0 and no OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards. ³: although I really should track down why InputManager::poll() is crashing the emulator when Video::ready() returns false ... ⁴: really bizarrely, when entering fullscreen mode, it looks like the image was a triangle strip, and the bottom right triange is missing, and the top left triangle skews the entire image into it. I'm suspecting this is a Radeon driver bug when trying to create a 2560x1600 X-Video surface. The glitch persists when exiting fullscreen, too. If anyone can test the X-Video driver on their Linux/BSD system, it'd be appreciated. If it's just my video card, I'll ignore it. If not, hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
updateDevice();
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
updateEffects(true);
}
Update to v103r18 release. byuu says: Changelog: - tomoko: improved handling of changing audio devices on the audio settings panel - ruby/audio/wasapi: added device enumeration and selection support¹ - ruby/audio/wasapi: release property store handle from audio device - ruby/audio/wasapi: fix exclusive mode buffer filling - ruby/video/glx2: ported to new API -- tested and confirmed working great² - ruby/video/sdl: fixed initialization -- tested and confirmed working on FreeBSD now³ - ruby/video/xv: ported to new API -- tested and mostly working great, sans fullscreen mode⁴ Errata: - accidentally changed "Driver Settings" label to "Driver" on the audio settings tab because I deleted the line and forgot the "Settings" part - need to use "return initialize();" from setDevice() in the WASAPI driver, instead of "return true;", so device selection is currently not functioning in this WIP for said driver ¹: for now, this will likely end up selecting the first available endpoint device, which is probably wrong. I need to come up with a system to expose good 'default values' when selecting new audio drivers, or changing audio device settings. ²: glx2 is a fallback driver for system with only OpenGL 2.0 and no OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards. ³: although I really should track down why InputManager::poll() is crashing the emulator when Video::ready() returns false ... ⁴: really bizarrely, when entering fullscreen mode, it looks like the image was a triangle strip, and the bottom right triange is missing, and the top left triangle skews the entire image into it. I'm suspecting this is a Radeon driver bug when trying to create a 2560x1600 X-Video surface. The glitch persists when exiting fullscreen, too. If anyone can test the X-Video driver on their Linux/BSD system, it'd be appreciated. If it's just my video card, I'll ignore it. If not, hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
auto AudioSettings::updateDevice() -> void {
frequencyList.reset();
Update to v104r06 release. byuu says: Changelog: - gba,ws: removed Thread::step() override¹ - processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not by one² - tomoko: created new initialize(Video,Audio,Input)Driver() functions³ - ruby/audio: split Audio::information into Audio::available(Devices,Frequencies,Latencies,Channels)³ - ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)() functions for consistency with other cores ¹: this should hopefully fix GBA Pokemon Pinball. Thanks to SuperMikeMan for pointing out the underlying cause. ²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more games. ³: this is the big change: so there was a problem with WASAPI where you might change your device under the audio settings panel. And your new device may not support the frequency that your old device used. This would end up not updating the frequency, and the pitch would be distorted. The old Audio::information() couldn't tell you what frequencies, latencies, or channels were available for all devices simultaneously, so I had to split them up. The new initializeAudioDriver() function validates you have a correct driver, or it defaults to none. Then it validates a correct device name, or it defaults to the first entry in the list. Then it validates a correct frequency, or defaults to the first in the list. Then finally it validates a correct latency, or defaults to the first in the list. In this way ... we have a clear path now with no API changes required to select default devices, frequencies, latencies, channel counts: they need to be the first items in their respective lists. So, what we need to do now is go through and for every audio driver that enumerates devices, we need to make sure the default device gets added to the top of the list. I'm ... not really sure how to do this with most drivers, so this is definitely going to take some time. Also, when you change a device, initializeAudioDriver() is called again, so if it's a bad device, it will disable the audio driver instead of continuing to send samples at it and hoping that the driver blocked those API calls when it failed to initialize properly. Now then ... since it was a decently-sized API change, it's possible I've broken compilation of the Linux drivers, so please report any compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
for(auto& frequency : audio->availableFrequencies()) {
frequencyList.append(ComboButtonItem().setText((uint)frequency));
Update to v103r18 release. byuu says: Changelog: - tomoko: improved handling of changing audio devices on the audio settings panel - ruby/audio/wasapi: added device enumeration and selection support¹ - ruby/audio/wasapi: release property store handle from audio device - ruby/audio/wasapi: fix exclusive mode buffer filling - ruby/video/glx2: ported to new API -- tested and confirmed working great² - ruby/video/sdl: fixed initialization -- tested and confirmed working on FreeBSD now³ - ruby/video/xv: ported to new API -- tested and mostly working great, sans fullscreen mode⁴ Errata: - accidentally changed "Driver Settings" label to "Driver" on the audio settings tab because I deleted the line and forgot the "Settings" part - need to use "return initialize();" from setDevice() in the WASAPI driver, instead of "return true;", so device selection is currently not functioning in this WIP for said driver ¹: for now, this will likely end up selecting the first available endpoint device, which is probably wrong. I need to come up with a system to expose good 'default values' when selecting new audio drivers, or changing audio device settings. ²: glx2 is a fallback driver for system with only OpenGL 2.0 and no OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards. ³: although I really should track down why InputManager::poll() is crashing the emulator when Video::ready() returns false ... ⁴: really bizarrely, when entering fullscreen mode, it looks like the image was a triangle strip, and the bottom right triange is missing, and the top left triangle skews the entire image into it. I'm suspecting this is a Radeon driver bug when trying to create a 2560x1600 X-Video surface. The glitch persists when exiting fullscreen, too. If anyone can test the X-Video driver on their Linux/BSD system, it'd be appreciated. If it's just my video card, I'll ignore it. If not, hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
if(frequency == settings["Audio/Frequency"].real()) {
frequencyList.item(frequencyList.itemCount() - 1).setSelected();
}
}
latencyList.reset();
Update to v104r06 release. byuu says: Changelog: - gba,ws: removed Thread::step() override¹ - processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not by one² - tomoko: created new initialize(Video,Audio,Input)Driver() functions³ - ruby/audio: split Audio::information into Audio::available(Devices,Frequencies,Latencies,Channels)³ - ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)() functions for consistency with other cores ¹: this should hopefully fix GBA Pokemon Pinball. Thanks to SuperMikeMan for pointing out the underlying cause. ²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more games. ³: this is the big change: so there was a problem with WASAPI where you might change your device under the audio settings panel. And your new device may not support the frequency that your old device used. This would end up not updating the frequency, and the pitch would be distorted. The old Audio::information() couldn't tell you what frequencies, latencies, or channels were available for all devices simultaneously, so I had to split them up. The new initializeAudioDriver() function validates you have a correct driver, or it defaults to none. Then it validates a correct device name, or it defaults to the first entry in the list. Then it validates a correct frequency, or defaults to the first in the list. Then finally it validates a correct latency, or defaults to the first in the list. In this way ... we have a clear path now with no API changes required to select default devices, frequencies, latencies, channel counts: they need to be the first items in their respective lists. So, what we need to do now is go through and for every audio driver that enumerates devices, we need to make sure the default device gets added to the top of the list. I'm ... not really sure how to do this with most drivers, so this is definitely going to take some time. Also, when you change a device, initializeAudioDriver() is called again, so if it's a bad device, it will disable the audio driver instead of continuing to send samples at it and hoping that the driver blocked those API calls when it failed to initialize properly. Now then ... since it was a decently-sized API change, it's possible I've broken compilation of the Linux drivers, so please report any compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
for(auto& latency : audio->availableLatencies()) {
Update to v103r18 release. byuu says: Changelog: - tomoko: improved handling of changing audio devices on the audio settings panel - ruby/audio/wasapi: added device enumeration and selection support¹ - ruby/audio/wasapi: release property store handle from audio device - ruby/audio/wasapi: fix exclusive mode buffer filling - ruby/video/glx2: ported to new API -- tested and confirmed working great² - ruby/video/sdl: fixed initialization -- tested and confirmed working on FreeBSD now³ - ruby/video/xv: ported to new API -- tested and mostly working great, sans fullscreen mode⁴ Errata: - accidentally changed "Driver Settings" label to "Driver" on the audio settings tab because I deleted the line and forgot the "Settings" part - need to use "return initialize();" from setDevice() in the WASAPI driver, instead of "return true;", so device selection is currently not functioning in this WIP for said driver ¹: for now, this will likely end up selecting the first available endpoint device, which is probably wrong. I need to come up with a system to expose good 'default values' when selecting new audio drivers, or changing audio device settings. ²: glx2 is a fallback driver for system with only OpenGL 2.0 and no OpenGL 3.2 drivers, such as FreeBSD 10.1 with AMD graphics cards. ³: although I really should track down why InputManager::poll() is crashing the emulator when Video::ready() returns false ... ⁴: really bizarrely, when entering fullscreen mode, it looks like the image was a triangle strip, and the bottom right triange is missing, and the top left triangle skews the entire image into it. I'm suspecting this is a Radeon driver bug when trying to create a 2560x1600 X-Video surface. The glitch persists when exiting fullscreen, too. If anyone can test the X-Video driver on their Linux/BSD system, it'd be appreciated. If it's just my video card, I'll ignore it. If not, hopefully someone can find the cause of the issue :|
2017-07-20 11:52:47 +00:00
latencyList.append(ComboButtonItem().setText(latency));
if(latency == settings["Audio/Latency"].natural()) {
latencyList.item(latencyList.itemCount() - 1).setSelected();
}
}
}
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
auto AudioSettings::updateEffects(bool initializing) -> void {
settings["Audio/Volume"].setValue(volumeSlider.position());
volumeValue.setText({volumeSlider.position(), "%"});
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
settings["Audio/Balance"].setValue(balanceSlider.position());
balanceValue.setText({balanceSlider.position(), "%"});
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
settings["Audio/Reverb/Enable"].setValue(reverbEnable.checked());
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
Update to v103r16 release. byuu says: Changelog: - emulator/audio: added the ability to change the output frequency at run-time without emulator reset - tomoko: display video synchronize option again¹ - tomoko: Settings→Configuration expanded to Settings→{Video, Audio, Input, Hotkey, Advanced} Settings² - tomoko: fix default population of audio settings tab - ruby: Audio::frequency is a double now (to match both Emulator::Audio and ASIO)³ - tomoko: changing the audio device will repopulate the frequency and latency lists - tomoko: changing the audio frequency can now be done in real-time - ruby/audio/asio: added missing device() information, so devices can be changed now - ruby/audio/openal: ported to new API; added device selection support - ruby/audio/wasapi: ported to new API, but did not test yet (it's assuredly still broken)⁴ ¹: I'm uneasy about this ... but, I guess if people want to disable audio and just have smooth scrolling video ... so be it. With Screwtape's documentation, hopefully that'll help people understand that video synchronization always breaks audio synchronization. I may change this to a child menu that lets you pick between {no synchronization, video synchronization, audio synchronization} as a radio selection. ²: given how much more useful the video and audio tabs are now, I felt that four extra menu items were worth saving a click and going right to the tab you want. This also matches the behavior of the Tools menu displaying all tool options and taking you directly to each tab. This is kind of a hard change to get used to ... but I think it's for the better. ³: kind of stupid because I've never seen a hardware sound card where floor(frequency) != frequency, but whatever. Yay consistency. ⁴: I'm going to move it to be event-driven, and try to support 24-bit sample formats if possible. Who knows which cards that'll fix and which cards that'll break. I may end up making multiple WASAPI drivers so people can find one that actually works for them. We'll see.
2017-07-17 10:32:36 +00:00
if(!initializing) program->updateAudioEffects();
}