bsnes/higan/md/system/system.hpp

44 lines
1.2 KiB
C++
Raw Normal View History

Update to v100r02 release. byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing.
2016-07-09 04:21:37 +00:00
struct System {
enum class Region : uint {
NTSCJ,
NTSCU,
PAL,
};
auto loaded() const -> bool { return information.loaded; }
auto region() const -> Region { return information.region; }
Update to v103r02 release. byuu says: Changelog: - fc/apu: improved phase duty cycle emulation (mode 3 is 25% phase inverted; counter decrements) - md/apu: power/reset do not cancel 68K bus requests - md/apu: 68K is not granted bus access on Z80 power/reset - md/controller: replaced System::Peripherals with ControllerPort concept - md/controller: CTRL port is now read-write, maintains value across controller changes (and soon, soft resets) - md/psg: PSG sampling rate unintentionally modified¹ - processor/spc700: improve cycle timing of (indirect),y instructions [Overload] - processor/spc700: idle() cycles actually read from the program counter; much like the 6502 [Overload] - some of the idle() cycles should read from other addresses; this still needs to be supported - processor/spc700: various cleanups to instruction function naming - processor/z80: prefix state (HL→IX,IY override) can now be serialized - icarus: fix install rule for certain platforms (it wasn't buggy on FreeBSD, but was on Linux?) ¹: the clock speed of the PSG is oscillator/15. But I was setting the sampling rate to oscillator/15/16, which was around 223KHz. I am not sure whether the PSG should be outputting at 3MHz or 223KHz. Amazingly ... I don't really hear a difference either way `o_O` I didn't actually mean to make this change; I just noticed it after comparing the diff between r01 and r02. If this turns out to be wrong, set stream = Emulator::audio.createStream(1, frequency() / 16.0); in md/psg.cpp to revert this change.
2017-06-27 01:18:28 +00:00
auto frequency() const -> double { return information.frequency; }
Update to v100r02 release. byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing.
2016-07-09 04:21:37 +00:00
auto run() -> void;
Update to v102r16 release. byuu says: Changelog: - Emulator::Stream now allows adding low-pass and high-pass filters dynamically - also accepts a pass# count; each pass is a second-order biquad butterworth IIR filter - Emulator::Stream no longer automatically filters out >20KHz frequencies for all streams - FC: added 20Hz high-pass filter; 20KHz low-pass filter - GB: removed simple 'magic constant' high-pass filter of unknown cutoff frequency (missed this one in the last WIP) - GB,SGB,GBC: added 20Hz high-pass filter; 20KHz low-pass filter - MS,GG,MD/PSG: added 20Hz high-pass filter; 20KHz low-pass filter - MD: added save state support (but it's completely broken for now; sorry) - MD/YM2612: fixed Voice#3 per-operator pitch support (fixes sound effects in Streets of Rage, etc) - PCE: added 20Hz high-pass filter; 20KHz low-pass filter - WS,WSC: added 20Hz high-pass filter; 20KHz low-pass filter So, the point of the low-pass filters is to remove frequencies above human hearing. If we don't do this, then resampling will introduce aliasing that results in sounds that are audible to the human ear. Which basically an annoying buzzing sound. You'll definitely hear the improvement from these in games like Mega Man 2 on the NES. Of course, these already existed before, so this WIP won't sound better than previous WIPs. The high-pass filters are a little more complicated. Their main role is to remove DC bias and help to center the audio stream. I don't understand how they do this at all, but ... that's what everyone who knows what they're talking about says, thus ... so be it. I have set all of the high-pass filters to 20Hz, which is below the limit of human hearing. Now this is where it gets really interesting ... technically, some of these systems actually cut off a lot of range. For instance, the GBA should technically use an 800Hz high-pass filter when output is done through the system's speakers. But of course, if you plug in headphones, you can hear the lower frequencies. Now 800Hz ... you definitely can hear. At that level, nearly all of the bass is stripped out and the audio is very tinny. Just like the real system. But for now, I don't want to emulate the audio being crushed that badly. I'm sticking with 20Hz everywhere since it won't negatively affect audio quality. In fact, you should not be able to hear any difference between this WIP and the previous WIP. But theoretically, DC bias should mostly be removed as a result of these new filters. It may be that we need to raise the values on some cores in the future, but I don't want to do that until we know for certain that we have to. What I can say is that compared to even older WIPs than r15 ... the removal of the simple one-pole low-pass and high-pass filters with the newer three-pass, second-order filters should result in much better attenuation (less distortion of audible frequencies.) Probably not enough to be noticeable in a blind test, though.
2017-03-08 20:20:40 +00:00
auto runToSave() -> void;
Update to v100r02 release. byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing.
2016-07-09 04:21:37 +00:00
auto load(Emulator::Interface*, maybe<Region> = nothing) -> bool;
Update to v100r02 release. byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing.
2016-07-09 04:21:37 +00:00
auto save() -> void;
auto unload() -> void;
auto power() -> void;
Update to v102r16 release. byuu says: Changelog: - Emulator::Stream now allows adding low-pass and high-pass filters dynamically - also accepts a pass# count; each pass is a second-order biquad butterworth IIR filter - Emulator::Stream no longer automatically filters out >20KHz frequencies for all streams - FC: added 20Hz high-pass filter; 20KHz low-pass filter - GB: removed simple 'magic constant' high-pass filter of unknown cutoff frequency (missed this one in the last WIP) - GB,SGB,GBC: added 20Hz high-pass filter; 20KHz low-pass filter - MS,GG,MD/PSG: added 20Hz high-pass filter; 20KHz low-pass filter - MD: added save state support (but it's completely broken for now; sorry) - MD/YM2612: fixed Voice#3 per-operator pitch support (fixes sound effects in Streets of Rage, etc) - PCE: added 20Hz high-pass filter; 20KHz low-pass filter - WS,WSC: added 20Hz high-pass filter; 20KHz low-pass filter So, the point of the low-pass filters is to remove frequencies above human hearing. If we don't do this, then resampling will introduce aliasing that results in sounds that are audible to the human ear. Which basically an annoying buzzing sound. You'll definitely hear the improvement from these in games like Mega Man 2 on the NES. Of course, these already existed before, so this WIP won't sound better than previous WIPs. The high-pass filters are a little more complicated. Their main role is to remove DC bias and help to center the audio stream. I don't understand how they do this at all, but ... that's what everyone who knows what they're talking about says, thus ... so be it. I have set all of the high-pass filters to 20Hz, which is below the limit of human hearing. Now this is where it gets really interesting ... technically, some of these systems actually cut off a lot of range. For instance, the GBA should technically use an 800Hz high-pass filter when output is done through the system's speakers. But of course, if you plug in headphones, you can hear the lower frequencies. Now 800Hz ... you definitely can hear. At that level, nearly all of the bass is stripped out and the audio is very tinny. Just like the real system. But for now, I don't want to emulate the audio being crushed that badly. I'm sticking with 20Hz everywhere since it won't negatively affect audio quality. In fact, you should not be able to hear any difference between this WIP and the previous WIP. But theoretically, DC bias should mostly be removed as a result of these new filters. It may be that we need to raise the values on some cores in the future, but I don't want to do that until we know for certain that we have to. What I can say is that compared to even older WIPs than r15 ... the removal of the simple one-pole low-pass and high-pass filters with the newer three-pass, second-order filters should result in much better attenuation (less distortion of audible frequencies.) Probably not enough to be noticeable in a blind test, though.
2017-03-08 20:20:40 +00:00
//serialization.cpp
auto serializeInit() -> void;
auto serialize() -> serializer;
auto unserialize(serializer&) -> bool;
auto serializeAll(serializer&) -> void;
auto serialize(serializer&) -> void;
private:
Emulator::Interface* interface = nullptr;
Update to v100r02 release. byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing.
2016-07-09 04:21:37 +00:00
struct Information {
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
string manifest;
Update to v100r02 release. byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing.
2016-07-09 04:21:37 +00:00
bool loaded = false;
Region region = Region::NTSCJ;
Update to v103r02 release. byuu says: Changelog: - fc/apu: improved phase duty cycle emulation (mode 3 is 25% phase inverted; counter decrements) - md/apu: power/reset do not cancel 68K bus requests - md/apu: 68K is not granted bus access on Z80 power/reset - md/controller: replaced System::Peripherals with ControllerPort concept - md/controller: CTRL port is now read-write, maintains value across controller changes (and soon, soft resets) - md/psg: PSG sampling rate unintentionally modified¹ - processor/spc700: improve cycle timing of (indirect),y instructions [Overload] - processor/spc700: idle() cycles actually read from the program counter; much like the 6502 [Overload] - some of the idle() cycles should read from other addresses; this still needs to be supported - processor/spc700: various cleanups to instruction function naming - processor/z80: prefix state (HL→IX,IY override) can now be serialized - icarus: fix install rule for certain platforms (it wasn't buggy on FreeBSD, but was on Linux?) ¹: the clock speed of the PSG is oscillator/15. But I was setting the sampling rate to oscillator/15/16, which was around 223KHz. I am not sure whether the PSG should be outputting at 3MHz or 223KHz. Amazingly ... I don't really hear a difference either way `o_O` I didn't actually mean to make this change; I just noticed it after comparing the diff between r01 and r02. If this turns out to be wrong, set stream = Emulator::audio.createStream(1, frequency() / 16.0); in md/psg.cpp to revert this change.
2017-06-27 01:18:28 +00:00
double frequency = Emulator::Constants::Colorburst::NTSC * 15.0;
Update to v102r16 release. byuu says: Changelog: - Emulator::Stream now allows adding low-pass and high-pass filters dynamically - also accepts a pass# count; each pass is a second-order biquad butterworth IIR filter - Emulator::Stream no longer automatically filters out >20KHz frequencies for all streams - FC: added 20Hz high-pass filter; 20KHz low-pass filter - GB: removed simple 'magic constant' high-pass filter of unknown cutoff frequency (missed this one in the last WIP) - GB,SGB,GBC: added 20Hz high-pass filter; 20KHz low-pass filter - MS,GG,MD/PSG: added 20Hz high-pass filter; 20KHz low-pass filter - MD: added save state support (but it's completely broken for now; sorry) - MD/YM2612: fixed Voice#3 per-operator pitch support (fixes sound effects in Streets of Rage, etc) - PCE: added 20Hz high-pass filter; 20KHz low-pass filter - WS,WSC: added 20Hz high-pass filter; 20KHz low-pass filter So, the point of the low-pass filters is to remove frequencies above human hearing. If we don't do this, then resampling will introduce aliasing that results in sounds that are audible to the human ear. Which basically an annoying buzzing sound. You'll definitely hear the improvement from these in games like Mega Man 2 on the NES. Of course, these already existed before, so this WIP won't sound better than previous WIPs. The high-pass filters are a little more complicated. Their main role is to remove DC bias and help to center the audio stream. I don't understand how they do this at all, but ... that's what everyone who knows what they're talking about says, thus ... so be it. I have set all of the high-pass filters to 20Hz, which is below the limit of human hearing. Now this is where it gets really interesting ... technically, some of these systems actually cut off a lot of range. For instance, the GBA should technically use an 800Hz high-pass filter when output is done through the system's speakers. But of course, if you plug in headphones, you can hear the lower frequencies. Now 800Hz ... you definitely can hear. At that level, nearly all of the bass is stripped out and the audio is very tinny. Just like the real system. But for now, I don't want to emulate the audio being crushed that badly. I'm sticking with 20Hz everywhere since it won't negatively affect audio quality. In fact, you should not be able to hear any difference between this WIP and the previous WIP. But theoretically, DC bias should mostly be removed as a result of these new filters. It may be that we need to raise the values on some cores in the future, but I don't want to do that until we know for certain that we have to. What I can say is that compared to even older WIPs than r15 ... the removal of the simple one-pole low-pass and high-pass filters with the newer three-pass, second-order filters should result in much better attenuation (less distortion of audible frequencies.) Probably not enough to be noticeable in a blind test, though.
2017-03-08 20:20:40 +00:00
uint serializeSize = 0;
Update to v100r02 release. byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing.
2016-07-09 04:21:37 +00:00
} information;
};
extern System system;
auto Region::NTSCJ() -> bool { return system.region() == System::Region::NTSCJ; }
auto Region::NTSCU() -> bool { return system.region() == System::Region::NTSCU; }
auto Region::PAL() -> bool { return system.region() == System::Region::PAL; }