Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Same machine name can be used by different architectures. Hence, create
aarch64 folder and move all aarch64 related AML files for virt machine
inside.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-11-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support multiple architectures using same machine name, create x86
folder and move all x86 related AML files for each machine type inside.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-10-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To search for expected AML files under ${arch}/${machine} path, set this
field for X86 related test cases.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To search for expected AML files under ${arch}/${machine} path, set this
field for AARCH64 related test cases.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-8-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since machine name can be common for multiple architectures (ex: virt),
add "arch" in the path to search for expected AML files. Since the AML
files are still under old path, add support for searching with and
without arch in the path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Existing AARCH64 virt test functions do not have AARCH64 in their name.
To add RISC-V virt related test cases, better to rename existing
functions to indicate they are ARM only.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-6-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To test ACPI tables, edk2 needs to be booted with a disk image having
EFI partition. This image is created using UefiTestToolsPkg.
The image is generated using tests/uefi-test-tools source.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20240625150839.1358279-5-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
edk2-funcs.sh which is used in this Makefile, was removed in the commit
c28a2891f3 ("edk2: update build script"). It is replaced with a python
based script. So, update the Makefile and add the configuration file as
required to support the python based build script.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-4-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable building the test application for RISC-V with appropriate
dependencies updated.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-3-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`memory-backend-shm` can be used with vhost-user devices, so let's
add a new test case for it.
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100534.145917-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`memory-backend-memfd` is available only on Linux while the new
`memory-backend-shm` can be used on any POSIX-compliant operating
system. Let's use it so we can run the test in multiple environments.
Since we are here, let`s remove `share=on` which is the default for shm
(and also for memfd).
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240618100527.145883-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Argument ordering for setcond2 is:
output, a_low, a_high, b_low, b_high, cond
The test is supposed to be against b_low, not a_high.
Cc: qemu-stable@nongnu.org
Fixes: ceb9ee06b7 ("tcg/optimize: Handle TCG_COND_TST{EQ,NE}")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2413
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240701024623.1265028-1-richard.henderson@linaro.org>
The non-standard .fa library suffix breaks the link source
de-duplication done by Meson so drop it.
The lack of link source de-duplication causes AddressSanitizer to
complain ODR violations, and makes GNU ld abort when combined with
clang's LTO.
Fortunately, the non-standard suffix is not necessary anymore for
two reasons.
First, the non-standard suffix was necessary for fork-fuzzing.
Meson wraps all standard-suffixed libraries with --start-group and
--end-group. This made a fork-fuzz.ld linker script wrapped as well and
broke builds. Commit d2e6f9272d ("fuzz: remove fork-fuzzing
scaffolding") dropped fork-fuzzing so we can now restore the standard
suffix.
Second, the libraries are not even built anymore, because it is
possible to just use the object files directly via extract_all_objects().
The occurences of the suffix were detected and removed by performing
a tree-wide search with 'fa' and .fa (note the quotes and dot).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used to request declare_dependency() to link_whole static libraries.
If a static library is a thin archive, GNU ld keeps all object files
referenced by the archive open, and sometimes exceeds the open file limit.
Another problem with link_whole is that suboptimal handling of nested
dependencies.
link_whole by itself does not propagate dependencies. In particular,
gnutls, a dependency of crypto, is not propagated to its users, and we
currently workaround the issue by declaring gnutls as a dependency for
each crypto user. On the other hand, if you write something like
libfoo = static_library('foo', 'foo.c', dependencies: gnutls)
foo = declare_dependency(link_whole: libfoo)
libbar = static_library('bar', 'bar.c', dependencies: foo)
bar = declare_dependency(link_whole: libbar, dependencies: foo)
executable('prog', sources: files('prog.c'), dependencies: [foo, bar])
hoping to propagate the gnutls dependency into bar.c, you'll see a
linking failure for "prog", because the foo.c.o object file is included in
libbar.a and therefore it is linked twice into "prog": once from libfoo.a
and once from libbar.a. Here Meson does not see the duplication, it
just asks the linker to link all of libfoo.a and libbar.a into "prog".
Instead of using link_whole, extract objects included in static libraries
and pass them to declare_dependency(); and then the dependencies can be
added as well so that they are propagated, because object files on the
linker command line are always deduplicated.
This requires Meson 1.1.0 or later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-objects-v1-1-07cbbe96166b@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Don't open qcow2 data files in 'qemu-img info'
- Disallow protocol prefixes for qcow2 data files, VMDK extent files and
other child nodes that are neither 'file' nor 'backing'
-----BEGIN PGP SIGNATURE-----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=7LWn
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches (CVE-2024-4467)
- Don't open qcow2 data files in 'qemu-img info'
- Disallow protocol prefixes for qcow2 data files, VMDK extent files and
other child nodes that are neither 'file' nor 'backing'
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmaEKQwRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9YgMA/+OeQf0veFb02ZNqf907Etz8/DvnqbiWUN
# 0aT5z5x8ilZQIiEDbFtLKgF3A/WO7phyCKk1q1dbRNbc1ZaWFW7mTaJM2ew++EuB
# fq0mnskLt/GVSqTReO4od7flsssp3sEDxs74yuyNITIUqui4we9WK2lLRiAv3aco
# 2NbyNeMHJxIW+QlOO3R62i24yjQaLyg/YekmiIK8itQkpKuI80fiVgor5W3RR0P0
# 71AVSHC0Edv5eavmiRqmQ+pfSI8tlINsN1s5jvxge6XpVTaL8NHsgH3LVv1R3Qtx
# Uo9hp6lQboAfc4I06gf+fcsYSBRiGCwA/J+JsWusX4FLaaTNHLt5eJAEJhfZlioj
# wgTqpy2ImRu5lcuLjLWRu4cLapPLI6CSwf4/lG9/szmRA/1UtOKpquKeTuCwMl9Y
# XEVoNDzo7GpfSb7YONo7fU7kq00OuEEAn0he7eNd2UU+Ao9Abi7JvY+fKx71FHo3
# k24SQVhVJihV1IEC4psCtaQm2bB/jdMr0jB44zHLtmqeUMLrrVf64cSAntp+2KRa
# sINBXA5OeblGKQ7FoAzc5NNNveSdF1ioRCvKB3MlHzI+efzRS7+I3wwh2Uz1Uwfo
# sivg+dAXQQBKVXn8UbfznFyEKueT0RW5CUbfeEqGQ/ocw7iTrXABsX+tjcktxl8Q
# zrHZNoAz6Ds=
# =7LWn
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 09:21:32 AM PDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
block: Parse filenames only when explicitly requested
iotests/270: Don't store data-file with json: prefix in image
iotests/244: Don't store data-file with protocol in image
qcow2: Don't open data_file with BDRV_O_NO_IO
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
One use case for 'qemu-img info' is verifying that untrusted images
don't reference an unwanted external file, be it as a backing file or an
external data file. To make sure that calling 'qemu-img info' can't
already have undesired side effects with a malicious image, just don't
open the data file at all with BDRV_O_NO_IO. If nothing ever tries to do
I/O, we don't need to have it open.
This changes the output of iotests case 061, which used 'qemu-img info'
to show that opening an image with an invalid data file fails. After
this patch, it succeeds. Replace this part of the test with a qemu-io
call, but keep the final 'qemu-img info' to show that the invalid data
file is correctly displayed in the output.
Fixes: CVE-2024-4467
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Introduce a test, that checks that plug/unplug of virtio-blk device
works.
(the test is developed by copying hotplug_cpu.py, so keep original
copyright)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240409065854.366856-1-vsementsov@yandex-team.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These GThreads are never referenced.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-15-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-14-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-12-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-11-750bb0946dbd@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A test function may not be executed depending on the test command line
so it is wrong to free data with a test function. Use
qtest_add_data_func_full() to register a function to free data.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240627-san-v2-10-750bb0946dbd@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
s390x with TCG is more stable now. Enable it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240525131241.378473-3-npiggin@gmail.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
[thuth: Added "with TCG" to the commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the scenario where vhost-user sets eventfd to -1,
qemu_chr_fe_get_msgfds retrieves fd as -1. When vhost_user_read
receives, it does not perform blocking operations on the descriptor
with fd=-1, so non-blocking operations should not be performed here
either.This is a normal use case. Calling g_unix_set_fd_nonblocking
at this point will cause the test to interrupt.
When vhost_user_write sets the call fd to -1, it sets the number of
fds to 0, so the fds obtained by qemu_chr_fe_get_msgfds will also
be 0.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Message-Id: <20240411073555.1357-1-yuxue.liu@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Validate that a shutdown via the pvpanic device emits the correct
QMP events.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240527-pvpanic-shutdown-v8-7-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid the necessity to update all tests when new events are added
to the device.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-4-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
EXTI's new field `irq_levels` tracks irq levels between tests when using
`global_qtest`.
This happens in `stm32l4x5_exti-test.c`, `stm32l4x5_syscfg-test.c` and
`stm32l4x5_gpio-test.c` (`dm163.c` doesn't use `global_qtest`).
To ensure that `irq_levels` has the same value before and after each
QTest, this commit toggles back the irq lines that were changed at the
end of each problematic test. Most QTests were already doing this.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-3-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QTest `test_irq_pin_multiplexer` makes the assumption that the
reset state of irq line 15 is low, which is false since STM32L4x5 GPIO
was implemented (the reset state of pin GPIOA15 is high because there's
pull-up and it results in the irq line 15 also being high at reset).
It wasn't triggering an error because `test_interrupt` was mistakenly
"resetting" the line low.
This commit corrects these two mistakes by :
- not setting the line low in `test_interrupt`
- using an irq line in `test_irq_pin_multiplexer` which is low at reset
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629104454.366283-1-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The version of the sbsa-ref EDK2 firmware we used to use in this test
had a bug where it might make an unaligned access to the framebuffer,
which causes a guest crash on newer versions of QEMU where we enforce
the architectural requirement that unaligned accesses to Device memory
should take an exception.
We happened to not notice this because our test was booting with "-smp
1" and through luck this didn't write the boot logo to the framebuffer
at an unaligned address; but trying to boot the same firmware with two
CPUs would result in a guest crash. Now we have updated the firmware
we're using for the test, we can make the test use all the cores on the
board, so we are testing the SMP boot path.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-2-29a3a2f1be1e@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update firmware to have graphics card memory fix from EDK2 commit
c1d1910be6e04a8b1a73090cf2881fb698947a6e:
OvmfPkg/QemuVideoDxe: add feature PCD to remap framebuffer W/C
Some platforms (such as SBSA-QEMU on recent builds of the emulator) only
tolerate misaligned accesses to normal memory, and raise alignment
faults on such accesses to device memory, which is the default for PCIe
MMIO BARs.
When emulating a PCIe graphics controller, the framebuffer is typically
exposed via a MMIO BAR, while the disposition of the region is closer to
memory (no side effects on reads or writes, except for the changing
picture on the screen; direct random access to any pixel in the image).
In order to permit the use of such controllers on platforms that only
tolerate these types of accesses for normal memory, it is necessary to
remap the memory. Use the DXE services to set the desired capabilities
and attributes.
Hide this behavior under a feature PCD so only platforms that really
need it can enable it. (OVMF on x86 has no need for this)
With this fix enabled we can boot sbsa-ref with more than one cpu core.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-1-29a3a2f1be1e@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Found with fuzzing for qemu-8.2, but also relevant for master
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-ID: <20240521103106.119021-3-frolov@swemel.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make sure there will be an event for postcopy recovery, irrelevant of
whether the reconnect will success, or when the failure happens.
The added new case is to fail early in postcopy recovery, in which case it
didn't even reach RECOVER stage on src (and in real life it'll be the same
to dest, but the test case is just slightly more involved due to the dual
socketpair setup).
To do that, rename the postcopy_recovery_test_fail to reflect either stage
to fail, instead of a boolean.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Making sure the postcopy-recover-setup status is present in the postcopy
failure unit test. Note that it only applies to src QEMU not dest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Introduce a small helper to wait for a migration event, generalized from
the incoming migration path. Make the helper easier to use by allowing it
to keep waiting until the expected event is received.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Libvirt should always enable it, so it'll be nice qtest also cover that for
all tests on both sides. migrate_incoming_qmp() used to enable it only on
dst, now we enable them on both, as we'll start to sanity check events even
on the src QEMU.
We'll need to leave the one in migrate_incoming_qmp(), because
virtio-net-failover test uses that one only, and it relies on the events to
work.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Most of them are not needed, we can stick with one ifdef inside
postcopy_recover_fail() so as to cover the scm right tricks only.
The tests won't run on windows anyway due to has_uffd always false.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a multifd test for mapped-ram with passing of fds into QEMU. This
is how libvirt will consume the feature.
There are a couple of details to the fdset mechanism:
- multifd needs two distinct file descriptors (not duplicated with
dup()) so it can enable O_DIRECT only on the channels that do
aligned IO. The dup() system call creates file descriptors that
share status flags, of which O_DIRECT is one.
- the open() access mode flags used for the fds passed into QEMU need
to match the flags QEMU uses to open the file. Currently O_WRONLY
for src and O_RDONLY for dst.
Note that fdset code goes under _WIN32 because fd passing is not
supported on Windows.
Reviewed-by: Peter Xu <peterx@redhat.com>
[brought back the qmp_remove_fd() call at the end of the tests]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The tests are only allowed to run in systems that know about the
O_DIRECT flag and in filesystems which support it.
Note: this also brings back migrate_set_parameter_bool() which went
away when we removed the compression tests. I copied it verbatim.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
monitor_fdsets_cleanup() currently has three responsibilities:
1- Remove the fds that have been marked for removal(->removed=true) by
qmp_remove_fd(). This is overly complicated, but ok.
2- Remove any file descriptors that have been passed into QEMU and
never duplicated[1,2]. A file descriptor without duplicates
indicates that no part of QEMU has made use of it. This is
problematic because the current implementation does it only if the
guest is not running and the monitor is closed.
3- Remove/free fdsets that have become empty due to the above
removals. This is ok.
The scenario described in (2) is starting to show some cracks now that
we're trying to consume fds from the migration code:
- Doing cleanup every time the last monitor connection closes works to
reap unused fds, but also has the side effect of forcing the
management layer to pass the file descriptors again in case of a
disconnect/re-connect, if that happened to be the only monitor
connection.
Another side effect is that removing an fd with qmp_remove_fd() is
effectively delayed until the last monitor connection closes.
The usage of mon_refcount is also problematic because it's racy.
- Checking runstate_is_running() skips the cleanup unless the VM is
running and avoids premature cleanup of the fds, but also has the
side effect of blocking the legitimate removal of an fd via
qmp_remove_fd() if the VM happens to be in another state.
This affects qmp_remove_fd() and qmp_query_fdsets() in particular
because requesting a removal at a bad time (guest stopped) might
cause an fd to never be removed, or to be removed at a much later
point in time, causing the query command to continue showing the
supposedly removed fd/fdset.
Note that file descriptors that *have* been duplicated are owned by
the code that uses them and will be removed after qemu_close() is
called. Therefore we've decided that the best course of action to
avoid the undesired side-effects is to stop managing non-duplicated
file descriptors.
1- efb87c1697 ("monitor: Clean up fd sets on monitor disconnect")
2- ebe52b592d ("monitor: Prevent removing fd from set during init")
Reviewed-by: Peter Xu <peterx@redhat.com>
[fix logic mistake: s/fdset_free/fdset_free_if_empty]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a test for file migration using fdset. The passing of fds is more
complex than using a file path. This is also the scenario where it's
most important we ensure that the initial migration stream offset is
respected because the fdset interface is the one used by the
management layer when providing a non empty migration file.
Note that fd passing is not available on Windows, so anything that
uses add-fd needs to exclude that platform.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When doing file migration, QEMU accepts an offset that should be
skipped when writing the migration stream to the file. The purpose of
the offset is to allow the management layer to put its own metadata at
the start of the file.
We have tests for this in migration-test, but only testing that the
migration stream starts at the correct offset and not that it actually
leaves the data intact. Unsurprisingly, there's been a bug in that
area that the tests didn't catch.
Fix the tests to write some data to the offset region and check that
it's actually there after the migration.
While here, switch to using g_get_file_contents() which is more
portable than mmap().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
PCMachineClass::enforce_aligned_dimm was only used by the
pc-i440fx-2.1 machine, which got removed. It is now always
true. Remove it, simplifying pc_get_device_memory_range().
Update the comment in Avocado test_phybits_low_pse36().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-14-philmd@linaro.org>
Add a test case to test Aspeed OpenBMC SDK v09.01 on AST2700 board.
It loads u-boot-nodtb.bin, u-boot.dtb, tfa and optee-os
images to dram first which base address is 0x400000000.
Then, boot and launch 4 cpu cores.
```
qemu-system-aarch64 -machine ast2700-evb
-device loader,force-raw=on,addr=0x400000000,file=workdir/u-boot-nodtb.bin \
-device loader,force-raw=on,addr=uboot_dtb_load_addr,file=workdir/u-boot.dtb\
-device loader,force-raw=on,addr=0x430000000,file=workdir/bl31.bin\
-device loader,force-raw=on,addr=0x430080000,file=workdir/optee/tee-raw.bin\
-device loader,cpu-num=0,addr=0x430000000 \
-device loader,cpu-num=1,addr=0x430000000 \
-device loader,cpu-num=2,addr=0x430000000 \
-device loader,cpu-num=3,addr=0x430000000 \
-smp 4 \
-drive file=workdir/image-bmc,format=raw,if=mtd
```
A test image is downloaded from the ASPEED Forked OpenBMC GitHub release repository :
https://github.com/AspeedTech-BMC/openbmc/releases/
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
add qpl to compression method test for multifd migration
the qpl compression supports software path and hardware
path(IAA device), and the hardware path is used first by
default. If the hardware path is unavailable, it will
automatically fallback to the software path for testing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Similar to other archs, build a custom bios memory updater. Running the
test with OF code is a cool trick, but SLOF takes a long time to boot.
This reduces test time by around 3x (150s to 50s).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
ppc64 with TCG seems to no longer be failing this test, perhaps since
commit 03bfc2188f ("physmem: Fix migration dirty bitmap coherency
with TCG memory access") which is not ppc specific but was seen to hit
ppc64 quite easily.
Let's enable it again.
The s390x problem has been identified so mention it while we are
adjusting the comment.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The spapr QEMU machine defaults is useful outside libqos, so create a
new header for ppc specific qtests and move it there.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
* Make qtests more flexible with regards to non-available CPU models
* Improvements for the test-smp-parse unit test
-----BEGIN PGP SIGNATURE-----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=s7+V
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-06-12' of https://gitlab.com/thuth/qemu into staging
* Fix loongarch64 avocado test
* Make qtests more flexible with regards to non-available CPU models
* Improvements for the test-smp-parse unit test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmZpoEoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVF6g/+JYTRKmaIduQIP9g2+NkM+qMTbjI9Ow47
# 8Vdj/ePMXNWOZsgMPkCUdisYeMZEC+XMcDN1xvwZXwLTMTJRacZCSFRpeN4P0m0W
# 6aQ28+tPNgx+B9Eh2kc4TpxbiqSH8u5u4GEN4Y07rcX/3YbYyjFgZD8orRu/nJ+H
# 0wV7Riq9csi1BkLxrgKaHocFSOl4eOga4OFi+u4wIn/xoW3MN0laxe4iuoQRMZPf
# gJLPRhEija4lto8iIKNxJbTABB0wEcWRWtgqcbHxdatqh1lPTPBpWxmdD/v1LJn+
# H/eO+oh05NQdlhw7+xfWF9PD+MpIePbZ28oNb3X3uURROTdcxpBAgpPipv07FsT4
# LmU2nIBQ4FcpDOkhLnLmBmFBNO6uDCzuGzxFRhX1SIiGMABqTDOKynBQSgQI2iB0
# 5J47XUwHtnOoCvf4SRA/MZG8zNSQZdJbnuOBLgZ+vsCG14mWM2NbfSUwRkH6pd/J
# fEbODuzHZoYgUTxjR9+WMbINAbNjMy+SP2sGZIBzcAIIkybKynOy58LoCyNT684U
# ean9bnc65908PJxEfsQ6k9kNwkK4GwOqZi+X383nVgMJ9+3dDw8M76IVU59hsq1n
# wnz4VgFcRdXMYhj9zghaCgH2Ezw8gZHILXH+RlX0Bav4LQ5vSZQ6tRNwM4+rfXBe
# okF1Sxmz31U=
# =s7+V
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Jun 2024 06:19:06 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-06-12' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Allow specifying extra QEMU options on the command line
tests/unit/test-smp-parse: Test the full 8-levels topology hierarchy
tests/unit/test-smp-parse: Test "modules" and "dies" combination case
tests/unit/test-smp-parse: Test "modules" parameter in -smp
tests/unit/test-smp-parse: Make test cases aware of module level
tests/unit/test-smp-parse: Use default parameters=0 when not set in -smp
tests/unit/test-smp-parse: Fix an invalid topology case
tests/unit/test-smp-parse: Fix comment of parameters=1 case
tests/unit/test-smp-parse: Fix comments of drawers and books case
test: Remove libibumad dependence
meson: Remove libibumad dependence
tests/qtest/x86: check for availability of older cpu models before running tests
tests/qtest/libqtest: add qtest_has_cpu_model() api
qtest/x86/numa-test: do not use the obsolete 'pentium' cpu
tests/avocado: Update LoongArch bios file
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The use case for this is `make check-tcg EXTFLAGS="-accel kvm"`,
which allows validating the system TCG testcases on real hardware.
EXTFLAGS name is borrowed from tests/tcg/xtensa/Makefile.softmmu-target.
While at it, use += instead of = in order to be consistent with the
other architectures.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522184116.35975-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With module level, QEMU now support 8-levels topology hierarchy.
Cover "modules" in SMP_CONFIG_WITH_FULL_TOPO related cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-9-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since i386 PC machine supports both "modules" and "dies" in -smp, add the
"modules" and "dies" combination test case to match the actual topology
usage scenario.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-8-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cover the module cases in test-smp-parse.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-7-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, -smp supports module level.
It is necessary to consider the effects of module in the test cases to
ensure that the calculations are correct. This is also the preparation
to add module test cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-6-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since -smp allows parameters=1 whether the level is supported by
machine, to avoid the test scenarios where the parameter defaults to 1
cause some errors to be masked, explicitly set undesired parameters to
0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-5-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Adjust the "cpus" parameter to match the comment configuration.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-4-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SMP_CONFIG_WITH_FULL_TOPO hasn't support module level, so the parameter
should indicate the "clusters".
Additionally, reorder the parameters of -smp to match the topology
hierarchy order.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-3-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix the comments to match the actual configurations.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Message-ID: <20240529061925.350323-2-zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove libibumad dependence from the test environment.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240611105427.61395-3-pizhenwei@bytedance.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is better to check if some older cpu models like 486, athlon, pentium,
penryn, phenom, core2duo etc are available before running their corresponding
tests. Some downstream distributions may no longer support these older cpu
models.
Signature of add_feature_test() has been modified to return void as
FeatureTestArgs* was not used by the caller.
One minor correction. Replaced 'phenom' with '486' in the test
'x86/cpuid/auto-level/phenom/arat' matching the cpu used.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-4-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added a new test api qtest_has_cpu_model() in order to check availability of
some cpu models in the current QEMU binary. The specific architecture of the
QEMU binary is selected using the QTEST_QEMU_BINARY environment variable.
This api would be useful to run tests against some older cpu models after
checking if QEMU actually supported these models.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240610155303.7933-3-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'pentium' cpu is old and obsolete and should be avoided for running tests if
its not strictly needed. Use 'max' cpu instead for generic non-cpu specific
numa test.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20240610155303.7933-2-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The VM uses old bios to boot up only 1 cpu, causing the test case to fail.
Update the bios to solve this problem.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20240604030058.2327145-1-gaosong@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The n_threads argument is no longer used since the previous commit.
Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240527155851.892885-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Hexagon Programmer's Reference Manual says that the exception 0x1e
should be raised upon an unaligned program counter. Let's implement that
and also add some tests.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <277b7aeda2c717a96d4dde936b3ac77707cb6517.1714755107.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
At 09a7e7db0f (Hexagon (target/hexagon) Remove uses of
op_regs_generated.h.inc, 2024-03-06), we've changed the logic of
check_new_value() to use the new pre-calculated
packet->insn[...].dest_idx instead of calculating the index on the fly
using opcode_reginfo[...]. The dest_idx index is calculated roughly like
the following:
for reg in iset[tag]["syntax"]:
if reg.is_written():
dest_idx = regno
break
Thus, we take the first register that is writtable. Before that,
however, we also used to follow an alphabetical order on the register
type: 'd', 'e', 'x', and 'y'. No longer following that makes us select
the wrong register index and the HVX store new instruction does not
update the memory like expected.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <f548dc1c240819c724245e887f29f918441e9125.1716220379.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZmE0HwAKCRBAov/yOSY+
396sA/90m/zr91pLQlkhFuYLHg958Ow3L5ysblcuAAmcTXGi8iE9IeTTeZru6WEO
H/CL/njUkIgP+/Tio0n0Lx6rWkxOzGxWCpvzqrabsPGvs4GUtFEjI/2pvEWP6C9/
S6Jon3py0oZeoVx8D6Tr/CJrhD0IBptbEn1aiQNDRuSzeuCo1Q==
=xpjH
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240606' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240606
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZmE0HwAKCRBAov/yOSY+
# 396sA/90m/zr91pLQlkhFuYLHg958Ow3L5ysblcuAAmcTXGi8iE9IeTTeZru6WEO
# H/CL/njUkIgP+/Tio0n0Lx6rWkxOzGxWCpvzqrabsPGvs4GUtFEjI/2pvEWP6C9/
# S6Jon3py0oZeoVx8D6Tr/CJrhD0IBptbEn1aiQNDRuSzeuCo1Q==
# =xpjH
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 08:59:27 PM PDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240606' of https://gitlab.com/gaosong/qemu:
target/loongarch: fix a wrong print in cpu dump
hw/loongarch/virt: Enable extioi virt extension
hw/loongarch/virt: Use MemTxAttrs interface for misc ops
hw/intc/loongarch_extioi: Add extioi virt extension definition
tests/qtest: Add numa test for loongarch system
tests/libqos: Add loongarch virt machine node
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the new ability to output YAML we can build the package list for
our ansible setup scripts. We will integrate them in the next commit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-12-alex.bennee@linaro.org>
Beside g++ we also need the mingw-w64-tools for properly building
the code in qga/vss-win32/ , so let's install that package now, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240601070543.37786-5-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-11-alex.bennee@linaro.org>
Update to the latest version of lcitool. It dropped support for Fedora 38
and Alpine 3.18, so we have to update these to newer versions here, too.
Python 3.12 dropped the "imp" module which we still need for running
Avocado. Fortunately Fedora 40 still ships with a work-around package
that we can use until somebody updates our Avocado to a newer version.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240601070543.37786-3-thuth@redhat.com>
[AJB: regen on rebase]
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-10-alex.bennee@linaro.org>
We've missed to delete this file when removing support for CentOS 8.
Since the current upstream version of the lcitool removed support
for CentOS 8 now, too, we have to remove the file before updating.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240601070543.37786-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-8-alex.bennee@linaro.org>
This isn't really used and we have lighter weight docker containers
for testing this stuff directly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-5-alex.bennee@linaro.org>
As Centos Stream 8 goes out of support we need to update. To do this
powertools is replaced by crb and we don't over specify the python3 we
want.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240603175328.3823123-4-alex.bennee@linaro.org>
Add numa test case for loongarch system, it passes to run
with command "make check-qtest".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240528082155.938586-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c
It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.
Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prevent regressions when using NBD with TLS in the presence of
iothreads, adding coverage the fix to qio channels made in the
previous patch.
The shell function pick_unused_port() was copied from
nbdkit.git/tests/functions.sh.in, where it had all authors from Red
Hat, agreeing to the resulting relicensing from 2-clause BSD to GPLv2.
CC: qemu-stable@nongnu.org
CC: "Richard W.M. Jones" <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240531180639.1392905-6-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Partial support for NUMA setup:
- cpu nodes
- memory nodes
Used versions:
- Trusted Firmware v2.11.0
- Tianocore EDK2 stable202405
- Tianocore EDK2 Platforms code commit 4bbd0ed
Firmware is built using Debian 'bookworm' cross toolchain (gcc 12.2.0).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes test-failure on Fedora 40 CI.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240527040711.311865-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to avoid regressions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-15-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to have similar QMP objects in different tests. Reworking these
objects to make common parts by calling some helper functions doesn't
seem good. It's a lot more comfortable to see the whole QAPI request in
one place.
So, let's increase the limit, to unblock further commit
"iotests: add backup-discard-source"
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add test for a new backup option: discard-source.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-6-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Currently block_copy creates copy_bitmap in source node. But that is in
bad relation with .independent_close=true of copy-before-write filter:
source node may be detached and removed before .bdrv_close() handler
called, which should call block_copy_state_free(), which in turn should
remove copy_bitmap.
That's all not ideal: it would be better if internal bitmap of
block-copy object is not attached to any node. But that is not possible
now.
The simplest solution is just create copy_bitmap in filter node, where
anyway two other bitmaps are created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-4-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
linux-user/i386: Fix allocation and alignment of fp state in signal frame
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
0KPd/A==
=sYrE
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu into staging
target/i386: Introduce X86Access and use for xsave and friends
linux-user/i386: Fix allocation and alignment of fp state in signal frame
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmZT2GwdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV87pQf9F/cmrKQG1mVWKmJd
# MI7l63lbxejdgAADv1nmro+oapCsJSaQeUSrYp904ydqJjVfBJkaoXfknGsvxrNA
# oW7nEuYt0sBKdaBUKhYpMOJ3ivfw7lVVMJmjNv9ngZRhW+WOoJrBHoleUkVLiM7D
# rxkMLL+LQ7BR9i0Lv1unorOkqUPGNOnEd45qRn6k1g/Qnqi8SNMzxFwO8+232u8m
# EG9un/oh4mKPyb5vSg3Y4JLg+yDKCRScBqBU1wcKFe1u+umBkv2BNcU+k62AJh1q
# bv8i1n+X/dFAd1aj0NEupi04EOZIof5m3T4YIWg7M4I94NiFWNZ18vgskkmiO+Mo
# 0KPd/A==
# =sYrE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 26 May 2024 05:48:44 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20240526' of https://gitlab.com/rth7680/qemu: (28 commits)
target/i386: Pass host pointer and size to cpu_x86_{xsave,xrstor}
target/i386: Pass host pointer and size to cpu_x86_{fxsave,fxrstor}
target/i386: Pass host pointer and size to cpu_x86_{fsave,frstor}
target/i386: Convert do_xrstor to X86Access
target/i386: Convert do_xsave to X86Access
linux-user/i386: Honor xfeatures in xrstor_sigcontext
linux-user/i386: Fix allocation and alignment of fp state
linux-user/i386: Return boolean success from xrstor_sigcontext
linux-user/i386: Return boolean success from restore_sigcontext
linux-user/i386: Fix -mregparm=3 for signal delivery
linux-user/i386: Split out struct target_fregs_state
linux-user/i386: Replace target_fpstate_fxsave with X86LegacyXSaveArea
linux-user/i386: Remove xfeatures from target_fpstate_fxsave
linux-user/i386: Drop xfeatures_size from sigcontext arithmetic
target/i386: Add {hw,sw}_reserved to X86LegacyXSaveArea
target/i386: Add rbfm argument to cpu_x86_{xsave,xrstor}
target/i386: Split out do_xsave_chk
target/i386: Convert do_xrstor_* to X86Access
target/i386: Convert do_xsave_* to X86Access
tagret/i386: Convert do_fxsave, do_fxrstor to X86Access
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For modern cpus, the kernel uses xsave to store all extra
cpu state across the signal handler. For xsave/xrstor to
work, the pointer must be 64 byte aligned. Moreover, the
regular part of the signal frame must be 16 byte aligned.
Attempt to mirror the kernel code as much as possible.
Use enum FPStateKind instead of use_xsave() and use_fxsr().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1648
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The dbus_display1_dep is not really used since all occurrences also
request gio independently. Just list the generated sources and drop
dbus_display1_dep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
=lp7q
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hw/i386/pc_sysfw: Alias rather than copy isa-bios region
* target/i386: add control bits support for LAM
* target/i386: tweaks to new translator
* target/i386: add support for LAM in CPUID enumeration
* hw/i386/pc: Support smp.modules for x86 PC machine
* target-i386: hyper-v: Correct kvm_hv_handle_exit return value
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZOMlAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNTSwf8DOPgipepNcsxUQoV9nOBfNXqEWa6
# DilQGwuu/3eMSPITUCGKVrtLR5azwCwvNfYYErVBPVIhjImnk3XHwfKpH1csadgq
# 7Np8WGjAyKEIP/yC/K1VwsanFHv3hmC6jfcO3ZnsnlmbHsRINbvU9uMlFuiQkKJG
# lP/dSUcTVhwLT6eFr9DVDUnq4Nh7j3saY85pZUoDclobpeRLaEAYrawha1/0uQpc
# g7MZYsxT3sg9PIHlM+flpRvJNPz/ZDBdj4raN1xo4q0ET0KRLni6oEOVs5GpTY1R
# t4O8a/IYkxeI15K9U7i0HwYI2wVwKZbHgp9XPMYVZFJdKBGT8bnF56pV9A==
# =lp7q
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 10:58:40 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
target-i386: hyper-v: Correct kvm_hv_handle_exit return value
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use CPUCacheInfo.share_level to encode CPUID[4]
i386: Add cache topology info in CPUCacheInfo
hw/i386/pc: Support smp.modules for x86 PC machine
tests: Add test case of APIC ID for module level parsing
i386/cpu: Introduce module-id to X86CPU
i386: Support module_id in X86CPUTopoIDs
i386: Expose module level in CPUID[0x1F]
i386: Support modules_per_die in X86CPUTopoInfo
i386: Introduce module level cpu topology to CPUX86State
i386/cpu: Decouple CPUID[0x1F] subleaf with specific topology level
i386: Split topology types of CPUID[0x1F] from the definitions of CPUID[0xB]
i386/cpu: Introduce bitmap to cache available CPU topology levels
i386/cpu: Consolidate the use of topo_info in cpu_x86_cpuid()
i386/cpu: Use APIC ID info get NumSharingCache for CPUID[0x8000001D].EAX[bits 25:14]
i386/cpu: Use APIC ID info to encode cache topo in CPUID[4]
i386/cpu: Fix i/d-cache topology to core level for Intel CPU
target/i386: add control bits support for LAM
target/i386: add support for LAM in CPUID enumeration
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If analyze-migration.py cannot be run or crashes, the error is currently
ignored since the code only checks for nonzero values in case the child
exited properly. For example, if you run the test with a non-existing
Python interpreter, it still succeeds:
$ PYTHON=wrongpython QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/migration-test
...
# Running /x86_64/migration/analyze-script
# Using machine type: pc-q35-9.1
# starting QEMU: exec ./qemu-system-x86_64 -qtest unix:/tmp/qtest-417639.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-417639.qmp,id=char0 -mon chardev=char0,mode=control -display none -audio none -accel kvm -accel tcg -machine pc-q35-9.1, -name source,debug-threads=on -m 150M -serial file:/tmp/migration-test-XPLUN2/src_serial -drive if=none,id=d0,file=/tmp/migration-test-XPLUN2/bootsect,format=raw -device ide-hd,drive=d0,secs=1,cyls=1,heads=1 -uuid 11111111-1111-1111-1111-111111111111 -accel qtest
# starting QEMU: exec ./qemu-system-x86_64 -qtest unix:/tmp/qtest-417639.sock -qtest-log /dev/null -chardev socket,path=/tmp/qtest-417639.qmp,id=char0 -mon chardev=char0,mode=control -display none -audio none -accel kvm -accel tcg -machine pc-q35-9.1, -name target,debug-threads=on -m 150M -serial file:/tmp/migration-test-XPLUN2/dest_serial -incoming tcp:127.0.0.1:0 -drive if=none,id=d0,file=/tmp/migration-test-XPLUN2/bootsect,format=raw -device ide-hd,drive=d0,secs=1,cyls=1,heads=1 -accel qtest
**
ERROR:../../devel/qemu/tests/qtest/migration-test.c:1603:test_analyze_script: code should not be reached
migration-test: ../../devel/qemu/tests/qtest/libqtest.c:240: qtest_wait_qemu: Assertion `pid == s->qemu_pid' failed.
migration-test: ../../devel/qemu/tests/qtest/libqtest.c:240: qtest_wait_qemu: Assertion `pid == s->qemu_pid' failed.
ok 2 /x86_64/migration/analyze-script
...
Let's better fail the test in case the child did not exit properly, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
On s390x, we recently had a regression that broke migration / savevm
(see commit bebe9603fc ("hw/intc/s390_flic: Fix crash that occurs when
saving the machine state"). The problem was merged without being noticed
since we currently do not run any migration / savevm related tests on
x86 hosts.
While we currently cannot run all migration tests for the s390x target
on x86 hosts yet (due to some unresolved issues with TCG), we can at
least run some of the non-live tests to avoid such problems in the future.
Thus enable the "analyze-script" and the "bad_dest" tests before checking
for KVM on s390x or ppc64 (this also fixes the problem that the
"analyze-script" test was not run on s390x at all anymore since it got
disabled again by accident in a previous refactoring of the code).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
After i386 supports module level, it's time to add the test for module
level's parsing.
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Co-developed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240424154929.1487382-18-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support module level in i386 cpu topology structure "X86CPUTopoInfo".
Since x86 does not yet support the "modules" parameter in "-smp",
X86CPUTopoInfo.modules_per_die is currently always 1.
Therefore, the module level width in APIC ID, which can be calculated by
"apicid_bitwidth_for_count(topo_info->modules_per_die)", is always 0 for
now, so we can directly add APIC ID related helpers to support module
level parsing.
In addition, update topology structure in test-x86-topo.c.
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Co-developed-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Message-ID: <20240424154929.1487382-14-zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GDB commit a207f6b3a38 ('Rewrite "python" command exception handling')
changed how exit() called from Python scripts loaded by GDB behave,
turning it into an exception instead of a generic error code that is
returned. This change caused several QEMU tests to crash with the
following exception:
Python Exception <class 'SystemExit'>: 0
Error occurred in Python: 0
This happens because in tests/guest-debug/test_gdbstub.py exit is
called after the tests have completed.
This commit fixes it by politely asking GDB to exit via gdb.execute,
passing the proper fail_count to be reported to 'make', instead of
abruptly calling exit() from the Python script.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240515173132.2462201-4-gustavo.romero@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Validate that it is possible to pass 'parameter=1' for any SMP topology
parameter, since unsupported parameters are implicitly considered to
always have a value of 1.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-ID: <20240513123358.612355-3-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This effectively reverts
commit 54c4ea8f3a
Author: Zhao Liu <zhao1.liu@intel.com>
Date: Sat Mar 9 00:01:37 2024 +0800
hw/core/machine-smp: Deprecate unsupported "parameter=1" SMP configurations
but is not done as a 'git revert' since the part of the changes to the
file hw/core/machine-smp.c which add 'has_XXX' checks remain desirable.
Furthermore, we have to tweak the subsequently added unit test to
account for differing warning message.
The rationale for the original deprecation was:
"Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind
of configurations is marked deprecated since 9.0."
There are varying POVs on the topic of 'unsupported' topology levels.
It is common to say that on a system without hyperthreading, that there
is always 1 thread. Likewise when new CPUs introduced a concept of
multiple "dies', it was reasonable to say that all historical CPUs
before that implicitly had 1 'die'. Likewise for the more recently
introduced 'modules' and 'clusters' parameter'. From this POV, it is
valid to set 'parameter=1' on the -smp command line for any machine,
only a value > 1 is strictly an error condition.
It doesn't cause any functional difficulty for QEMU, because internally
the QEMU code is itself assuming that all "unsupported" parameters
implicitly have a value of '1'.
At the libvirt level, we've allowed applications to set 'parameter=1'
when configuring a guest, and pass that through to QEMU.
Deprecating this creates extra difficulty for because there's no info
exposed from QEMU about which machine types "support" which parameters.
Thus, libvirt can't know whether it is valid to pass 'parameter=1' for
a given machine type, or whether it will trigger deprecation messages.
Since there's no apparent functional benefit to deleting this deprecated
behaviour from QEMU, and it creates problems for consumers of QEMU,
remove this deprecation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-ID: <20240513123358.612355-2-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Run "make lcitool-refresh" after the previous changes to the
lcitool files. This removes the g++ and xfslibs-dev packages
from the dockerfiles (except for the fedora-win64-cross dockerfile
where we keep the C++ compiler).
Message-ID: <20240516084059.511463-6-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's try to keep the entries in alphabetical order here!
Message-ID: <20240516084059.511463-5-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't need C++ for the normal QEMU builds anymore, so installing
g++ in each and every container seems to be a waste of time and disk
space. The only container that still needs it is the Fedora MinGW
container that builds the only remaining C++ code in ./qga/vss-win32/
and we can install it there with an extra project yml file instead.
Message-ID: <20240516084059.511463-4-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU's commit a5730b8bd3 ("block/file-posix: Simplify the
XFS_IOC_DIOINFO handling") removed the need for the 'xfsprogs'
package.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[thuth: Adjusted the patch from the lcitools repo to QEMU's repo]
Message-ID: <20240516084059.511463-3-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case lcitool fails (e.g. with a python backtrace), this makes
the output of lcitool much more readable.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240516084059.511463-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Count number of tb and insn executed using a conditional callback. We
ensure the callback has been called expected number of time (per vcpu).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240502211522.346467-7-pierrick.bouvier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240514174253.694591-9-alex.bennee@linaro.org>
We don't want to build on the default machine setup here but define a
custom one for the microbit.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240514174253.694591-2-alex.bennee@linaro.org>
All the lcitool generated containers define a "MAKE" env. It will be
convenient for later patches if all containers do this.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240513111551.488088-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ARM/aarch64 are easy to fix because they already have to pass a machine
type by hand. Just guard the tests with a check that the machine actually
exists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do the bare minimum to ensure that at least a vanilla
--without-default-devices build works for all targets except i386,
x86_64 and ppc64. In particular this fixes s390x-softmmu; i386 and
x86_64 have about a dozen failing tests that do not pass -M and therefore
require a default machine type; ppc64 has the same issue, though only
with numa-test.
If we can for now ignore the cases where boards and devices are picked
by hand, drive_del-test however can be fixed easily; almost all tests
check for the virtio-blk or virtio-scsi device that they use, and are
already skipped. Only one didn't get the memo; plus another one does
not need a machine at all and can be run with -M none.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add boot-serial-test and filter test cases support on LoongArch system.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240509084745.2514607-1-maobibo@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU headers are relative to the include/ directory,
not to the project root directory. Remove "include/".
See also:
https://www.qemu.org/docs/master/devel/style.html#include-directives
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240507142737.95735-1-philmd@linaro.org>
The 'compress' migration capability enables the old compression code
which has shown issues over the years and is thought to be less stable
and tested than the more recent multifd-based compression. The old
compression code has been deprecated in 8.2 and now is time to remove
it.
Deprecation commit 864128df46 ("migration: Deprecate old compression
method").
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration is considered obsolete and has been deprecated in
8.2. Remove the migrate command option that enables it. This only
affects the QMP and HMP commands, the feature can still be accessed by
setting the migration 'block' capability. The whole feature will be
removed in a future patch.
Deprecation commit 8846b5bfca ("migration: migrate 'blk' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
=ZbNW
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386: Introduce SapphireRapids-v3 to add missing features
* switch boards to "default y"
* allow building emulators without any board
* configs: list "implied" device groups in the default configs
* remove unnecessary declarations from typedefs.h
* target/i386: Give IRQs a chance when resetting HF_INHIBIT_IRQ_MASK
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY1ILsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNtIwf+MEehq2HudZvsK1M8FrvNmkB/AssO
# x4tqL8DlTus23mQDBu9+rANTB93ManJdK9ybtf6NfjEwK+R8RJslLVnuy/qT+aQX
# PD208L88fjZg17G8uyawwvD1VmqWzHFSN14ShmKzqB2yPXXo/1cJ30w78DbD50yC
# 6rw/xbC5j195CwE2u8eBcIyY4Hh2PUYEE4uyHbYVr57cMjfmmA5Pg4I4FJrpLrF3
# eM2Avl/4pIbsW3zxXVB8QbAkgypxZErk3teDK1AkPJnlnBYM1jGKbt/GdKe7vcHR
# V/o+7NlcbS3oHVItQ2gP3m91stjFq+NhixaZpa0VlmuqayBa3xNGl0G6OQ==
# =ZbNW
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 May 2024 10:36:59 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
qga/commands-posix: fix typo in qmp_guest_set_user_password
migration: do not include coroutine_int.h
kvm: move target-dependent interrupt routing out of kvm-all.c
pci: remove some types from typedefs.h
tcg: remove CPU* types from typedefs.h
display: remove GraphicHwOps from typedefs.h
qapi/machine: remove types from typedefs.h
monitor: remove MonitorDef from typedefs.h
migration: remove PostcopyDiscardState from typedefs.h
lockable: remove QemuLockable from typedefs.h
intc: remove PICCommonState from typedefs.h
qemu-option: remove QemuOpt from typedefs.h
net: remove AnnounceTimer from typedefs.h
numa: remove types from typedefs.h
qdev-core: remove DeviceListener from typedefs.h
fw_cfg: remove useless declarations from typedefs.h
build: do not build virtio-vga-gl if virgl/opengl not available
bitmap: Use g_try_new0/g_new0/g_renew
target/i386: Introduce SapphireRapids-v3 to add missing features
docs: document new convention for Kconfig board symbols
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A previous commit narrowed the type of .visit_alternate_type()
parameter @variants from QAPISchemaVariants to QAPISchemaAlternatives.
Rename it to @alternatives.
One of them passes @alternatives to helper function
gen_visit_alternate(). Rename its @variants parameter to
@alternatives as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The previous commit narrowed the type of .visit_object_type()
parameter @variants from QAPISchemaVariants to QAPISchemaBranches.
Rename it to @branches.
Same for .visit_object_type_flat().
A few of these pass @branches to helper functions:
QAPISchemaGenRSTVisitor.visit_object_type() to ._nodes_for_members()
and ._nodes_for_variant_when(), and
QAPISchemaGenVisitVisitor.visit_object_type() to
gen_visit_object_members(). Rename the helpers' @variants parameters
to @branches as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make sure the decoding of HVX .new is correctly handling this case
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-6-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
The documentation says:
SUBV Rm, Rn Rn - Rm -> Rn, underflow -> T
The overflow / underflow can be calculated as:
T = ((Rn ^ Rm) & (Result ^ Rn)) >> 31
However we were using the incorrect:
T = ((Rn ^ Rm) & (Result ^ Rm)) >> 31
Fix by using the Rn register instead of Rm.
Add tests provided by Paul Cercueil.
Cc: qemu-stable@nongnu.org
Fixes: ad8d25a11f ("target-sh4: implement addv and subv using TCG")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2318
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240430163125.77430-3-philmd@linaro.org>
Benchmark each acceleration function vs an aligned buffer of zeros.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Together with the series at https://patchew.org/QEMU/20240423131612.28362-1-pbonzini@redhat.com/,
this allows adding sparc-softmmu to the target list of the
build-without-defaults CI job.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
`test_dm163_bank()`
Checks that the pin "sout" of the DM163 led driver outputs the values
received on pin "sin" with the expected latency (depending on the bank).
`test_dm163_gpio_connection()`
Check that changes to relevant STM32L4x5 GPIO pins are propagated to the
DM163 device.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-6-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to be connected to both SYSCFG inputs and DM163 inputs).
STM32L4x5 SYSCFG in-irq interception needed to be changed accordingly.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel 5.10.16 binary for sunxi has been removed from
apt.armbian.com. This means that the avocado tests for these machines
will be skipped (status CANCEL) if the old binary isn't present in
the avocado cache.
Update to 6.6.16, in the same way we did in commit e384db41d8
when we moved to 5.10.16 in 2021.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2284
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20240415151845.1564201-1-peter.maydell@linaro.org
Verify that the ATA command READ NATIVE MAX ADDRESS returns the last
valid CHS tuple for the native device rather than any limit
established by INITIALIZE DEVICE PARAMETERS.
Signed-off-by: Lev Kujawski <lkujaw@mailbox.org>
Message-ID: <20221010085229.2431276-2-lkujaw@mailbox.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
-----BEGIN PGP SIGNATURE-----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=WEsU
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement FEAT_NMI and NMI support in the GICv3
* hw/dma: avoid apparent overflow in soc_dma_set_request
* linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
* Add ResetType argument to Resettable hold and exit phase methods
* Add RESET_TYPE_SNAPSHOT_LOAD ResetType
* Implement STM32L4x5 USART
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYqMhMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uVlD/47U3zYP33y4+wJcRScC0QI
# jYd82jS7GhD5YP5QPrIEMaSbDwtYGi4Rez1taaHvZ2fWLg2gE973iixmTaM2mXCd
# xPEqMsRXkFrQnC89K5/v9uR04AvHxoM8J2mD2OKnUT0RVBs38WxCUMLETBsD18/q
# obs1RzDRhEs5BnwwPMm5HI1iQeVvDRe/39O3w3rZfA8DuqerrNOQWuJd43asHYjO
# Gc1QzCGhALlXDoqk11IzjhJ7es8WbJ5XGvrSNe9QLGNJwNsu9oi1Ez+5WK2Eht9r
# eRvGNFjH4kQY1YCShZjhWpdzU9KT0+80KLirMJFcI3vUztrYZ027/rMyKLHVOybw
# YAqgEUELwoGVzacpaJg73f77uknKoXrfTH25DfoLX0yFCB35JHOPcjU4Uq1z1pfV
# I80ZcJBDJ95mXPfyKLrO+0IyVBztLybufedK2aiH16waEGDpgsJv66FB2QRuQBYW
# O0i6/4DEUZmfSpOmr8ct+julz7wCWSjbvo6JFWxzzxvD0M5T3AFKXZI244g1SMdh
# LS8V7WVCVzVJ5mK8Ujp2fVaIIxiBzlXVZrQftWv5rhyDOiIIeP8pdekmPlI6p5HK
# 3/2efzSYNL2UCDZToIq24El/3md/7vHR6DBfBT1/pagxWUstqqLgkJO42jQtTG0E
# JY1cZ/EQY7cqXGrww8lhWA==
# =WEsU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:36:03 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240425' of https://git.linaro.org/people/pmaydell/qemu-arm: (37 commits)
tests/qtest: Add tests for the STM32L4x5 USART
hw/arm: Add the USART to the stm32l4x5 SoC
hw/char/stm32l4x5_usart: Add options for serial parameters setting
hw/char/stm32l4x5_usart: Enable serial read and write
hw/char: Implement STM32L4x5 USART skeleton
reset: Add RESET_TYPE_SNAPSHOT_LOAD
docs/devel/reset: Update to new API for hold and exit phase methods
hw, target: Add ResetType argument to hold and exit phase methods
scripts/coccinelle: New script to add ResetType to hold and exit phases
allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset
hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr
linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code
hw/dma: avoid apparent overflow in soc_dma_set_request
hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI
target/arm: Add FEAT_NMI to max
hw/intc/arm_gicv3: Report the VINMI interrupt
hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update()
hw/intc/arm_gicv3: Implement NMI interrupt priority
hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()
hw/intc/arm_gicv3: Add NMI handling CPU interface registers
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been running this test for almost a year; it
is safe to remove its debug statements, which clutter
CI jobs output:
▶ 88/100 /nested-aio-poll OK
io_read 0x16bb26158
io_poll_true 0x16bb26158
> io_poll_ready
io_read 0x16bb26164
< io_poll_ready
io_poll_true 0x16bb26158
io_poll_false 0x16bb26164
> io_poll_ready
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_poll_false 0x16bb26164
io_read 0x16bb26164
< io_poll_ready
88/100 qemu:unit / test-nested-aio-poll OK
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240422112246.83812-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test:
- read/write from/to the usart registers
- send/receive a character/string over the serial port
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-6-arnaud.minier@telecom-paris.fr
[PMM: fix checkpatch nits, remove commented out code]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To control that creating new machine type doesn't affect the previous
types (their compat_props) and to check complex compat_props inheritance
we need qmp command to print machine type compatibility properties.
This patch adds the ability to get list of all the compat_props of the
corresponding supported machines for their comparison via new optional
argument of "query-machines" command. Since information on compatibility
properties can increase the command output by a factor of 40, add an
argument to enable it, default off.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240318213550.155573-3-davydov-max@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
RHEL 9 (and thus also the derivatives) have been available since two
years now, so according to QEMU's support policy, we can drop the active
support for the previous major version 8 now.
Another reason for doing this is that Centos Stream 8 will go EOL soon:
https://blog.centos.org/2023/04/end-dates-are-coming-for-centos-stream-8-and-centos-linux-7/
"After May 31, 2024, CentOS Stream 8 will be archived
and no further updates will be provided."
Thus upgrade our CentOS Stream container to major version 9 now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This update adds the removing of the EXTERNALLY-MANAGED marker files
that has been added to the lcitool recently.
Quoting Daniel:
"For those who don't know, python now commonly blocks the ability to
run 'pip install' outside of a venv. This generally makes sense for
a precious installation environment. Our containers are disposable
though, so a venv has no benefit. Removing the 'EXTERNALLY-MANAGED'
allows the historical arbitrary use of 'pip' outside a venv.
lcitool just does this unconditionally given the containers are
not precious."
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need the latest fixes for the lcitool to be able to properly
update our CentOS docker file to CentOS Stream 9.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since Ubuntu 22.04 has now been available for more than two years, we
can stop actively supporting the previous LTS version of Ubuntu now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240418101056.302103-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The messages for assertions using hexadecimal numbers will be
easier to understand with `g_assert_cmphex`.
Cases changed : "cmpuint.*0x", "cmpuint.*<<"
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-ID: <20240414173349.31194-1-ines.varhol@telecom-paris.fr>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
=pJmQ
-----END PGP SIGNATURE-----
Merge tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.1
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
# fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
# =pJmQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 03:37:19 PM PDT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration/colo: Fix bdrv_graph_rdlock_main_loop: Assertion `!qemu_in_coroutine()' failed.
migration/multifd: solve zero page causing multiple page faults
migration: Add Error** argument to add_bitmaps_to_list()
migration: Modify ram_init_bitmaps() to report dirty tracking errors
migration: Add Error** argument to xbzrle_init()
migration: Add Error** argument to ram_state_init()
memory: Add Error** argument to the global_dirty_log routines
migration: Introduce ram_bitmaps_destroy()
memory: Add Error** argument to .log_global_start() handler
migration: Add Error** argument to .load_setup() handler
migration: Add Error** argument to .save_setup() handler
migration: Add Error** argument to qemu_savevm_state_setup()
migration: Add Error** argument to vmstate_save()
migration: Always report an error in ram_save_setup()
migration: Always report an error in block_save_setup()
vfio: Always report an error in vfio_save_setup()
s390/stattrib: Add Error** argument to set_migrationmode() handler
tests/qtest/migration: Fix typo for vsock in SocketAddress_to_str
tests/qtest/migration: Add negative tests to validate migration QAPIs
tests/qtest/migration: Add multifd_tcp_plain test using list of channels instead of uri
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration QAPI arguments - uri and channels are mutually exhaustive.
Add negative validation tests, one with both arguments present and
one with none present.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-9-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a positive test to check multifd live migration but this time
using list of channels (restricted to 1) as the starting point
instead of simple uri string.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-8-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Alter migrate_qmp() to allow use of channels parameter, but only
fill the uri with correct port number if there are no channels.
Here we don't want to allow the wrong cases of having both or
none (ex: migrate_qmp_fail).
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-7-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
migrate_get_connect_qdict gets qdict with the dst QEMU parameters.
migrate_set_ports() from list of channels reads each QDict for port,
and fills the port with correct value in case it was 0 in the test.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-6-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Alter migrate_qmp_fail() to allow both uri and channels
independently. For channels, convert string to a Dict.
No dealing with migrate_get_socket_address() here because
we will fail before starting the migration anyway.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-5-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Refactor migrate_get_socket_address to internally utilize 'socket-address'
parameter, reducing redundancy in the function definition.
migrate_get_socket_address implicitly converts SocketAddress into str.
Move migrate_get_socket_address inside migrate_get_connect_uri which
should return the uri string instead.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-4-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Move the calls to migrate_get_socket_address() into migrate_qmp().
Get rid of connect_uri and replace it with args->connect_uri only
because 'to' object will help to generate connect_uri with the
correct port number.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-3-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the 'to' object into migrate_qmp(), so we can use
migrate_get_socket_address() inside migrate_qmp() to get
the port value. This is not applied to other migrate_qmp*
because they don't need the port.
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240312202634.63349-2-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Try not to test code that is not used by user mode emulation, or by the
block layer, unless they are being compiled; and fix test-timed-average
which was not compiled with --disable-system --enable-tools.
This is by no means complete, it only touches the more blatantly
wrong cases.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no way to use them for testing, if all the available
accelerators use hardware virtualization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The saturation arithmetic logic in helper_macw is not correct.
I tested and verified this behavior on a SH7091.
Reviewd-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Zack Buhman <zack@buhman.org>
Message-Id: <20240405233802.29128-3-zack@buhman.org>
[rth: Reformat helper_macw, add a test case.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The saturation arithmetic logic in helper_macl is not correct.
I tested and verified this behavior on a SH7091.
Signed-off-by: Zack Buhman <zack@buhman.org>
Message-Id: <20240404162641.27528-2-zack@buhman.org>
[rth: Reformat helper_macl, add a test case.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out the tail of fold_neg to fold_neg_no_const so that we
can avoid attempting to constant fold vector negate.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2150
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since size_to_prdtl() is only used within ahci.c,
declare it statically. This removes the last use
of "inlined function with external linkage". See
previous commit and commit 9de9fa5cf2 for rationale.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240326171009.26696-4-philmd@linaro.org>
The test mangles the GPIO address and the pin number in the
qtest_add_data_func data parameter. Doing so, it assumes that the host
pointer size is always 64-bit, which breaks on 32-bit :
../tests/qtest/stm32l4x5_gpio-test.c: In function ‘test_gpio_output_mode’:
../tests/qtest/stm32l4x5_gpio-test.c:272:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
272 | unsigned int pin = ((uint64_t)data) & 0xF;
| ^
../tests/qtest/stm32l4x5_gpio-test.c:273:22: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
273 | uint32_t gpio = ((uint64_t)data) >> 32;
| ^
To fix, improve the mangling of the GPIO address and pin number fields
by using GPIO_SIZE so that the resulting value fits in a 32-bit pointer.
While at it, include some helpers to hide the details.
Cc: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Cc: Inès Varhol <ines.varhol@telecom-paris.fr>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240329092747.298259-1-clg@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=7UPB
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu into staging
Various fixes for recent regressions and new code.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmYJEQMACgkQZ7MCdqhi
# HK6l0BAAkVf/BXKJxMu3jLvCpK/fBYGytvfHBR9PdWeBwIirqsk3L8eI/Fb5qkMZ
# NMrfECyHR9LTcWb6/Pi/PGciNNWeyleN6IuVBeWfraIFyfHcxpwEKH8P+cXr5EWq
# WDg+1GUt9+FHuAC9UdGZ81UzX7qeI9VfD3wHceqJ/XRU3qjj67DPZjTpsvxuP64+
# N7MhdEM69F34uiIAn1aNCceXiS00dvtu6lDl3+18TzT8sNc6S3qdyxVcqfRhTJfY
# FMZIN3j2hQrVOElEQE9vAOeJyjAQCM+U0y3XZIZHFUw/GTwKV0tm08RFnnxprteG
# 67vR5uXrDEELnU/1PA1YeyaBMA3Z3Nc36XbGf8zTD6rKkS2z0lWMcs72pPIxbMXj
# c4FdnHaE+Q5ngy5s1p6bm5xM7WOEhrsJkgIu2N0weRroe0nAxywDWw3uQlMoV8Oc
# Xet/xM2IKdc0PLzTvFO7xKnW3oqavJ4CX/6XgrGBoMDZKO1JRqaMixGtYKmoH/1h
# 96+jdRbPTZAY8aoiFWW7t065lvdWt74A6QITcn2Kqm04j3MGJfyWMU6dakBzwuri
# PhOkf40o8qn8KN0JNfSO+IXhYVRRotLO/s9H7TEyQiXm25qrGMIF9FErnbDseZil
# rGR4eL0lcwJboYH9RSRWg0NNqpUekvqBzdnS+G0Ad3J+qaMYoik=
# =7UPB
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 31 Mar 2024 08:30:11 BST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu:
tests/avocado: ppc_hv_tests.py set alpine time before setup-alpine
tests/avocado: Fix ppc_hv_tests.py xorriso dependency guard
target/ppc: Do not clear MSR[ME] on MCE interrupts to supervisor
target/ppc: Fix GDB register indexing on secondary CPUs
target/ppc: Restore [H]DEXCR to 64-bits
target/ppc/mmu-radix64: Use correct string format in walk_tree()
hw/ppc/spapr: Include missing 'sysemu/tcg.h' header
spapr: nested: use bitwise NOT operator for flags check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the time is wrong, setup-alpine SSL certificate checks can fail.
setup-alpine is used to bring up the network, but it doesn't seem
to to set NTP time before the failing SSL checks. This test has
recently started failing presumably because the default time has
now fallen too far behind.
Fix this by setting time from the host time before running setup-alpine.
Fixes: c9cb496710 ("tests/avocado: ppc add hypervisor tests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For some reason the skipIf missing_deps() check fails to skip the test
if it comes after the skipUnless lines, causing an error running on
systems without xorriso.
Avocado implements skipUnless is just an inverted skipIf, so it's not
clear what the bug is or why this fixes it. For now it's enough to
get things working.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2246
Fixes: c9cb496710 ("tests/avocado: ppc add hypervisor tests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The 'sign' computation is attempting to locate the sign bit that has
been repeated, so that we can test if that bit is known zero. That
computation can be zero if there are no known sign repetitions.
Cc: qemu-stable@nongnu.org
Fixes: 93a967fbb5 ("tcg/optimize: Propagate sign info for shifting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2248
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit 558f5c42ef gated the local tests with g_test_slow() to skip them
in 'make check'. The reported issue back then was this following CI
problem:
https://lists.nongnu.org/archive/html/qemu-devel/2020-11/msg05510.html
This problem ended up being fixed after it was detected with the
recently added risc-v machine nodes [1]. virtio-9p-test.c is now
creating and removing temporary dirs for each test run, instead of
creating a single dir for the entire qos-test scope.
We're now able to run these tests with 'make check' in the CI, so let's
go ahead and re-enable them.
This reverts commit 558f5c42ef.
[1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20240327142011.805728-3-dbarboza@ventanamicro.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The local 9p driver in virtio-9p-test.c its temporary dir right at the
start of qos-test (via virtio_9p_create_local_test_dir()) and only
deletes it after qos-test is finished (via
virtio_9p_remove_local_test_dir()).
This means that any qos-test machine that ends up running virtio-9p-test
local tests more than once will end up re-using the same temp dir. This
is what's happening in [1] after we introduced the riscv machine nodes:
if we enable slow tests with the '-m slow' flag using
qemu-system-riscv64, this is what happens:
- a temp dir is created;
- virtio-9p-device tests will run virtio-9p-test successfully;
- virtio-9p-pci tests will run virtio-9p-test, and fail right at the
first slow test at fs_create_dir() because the "01" file was already
created by fs_create_dir() test when running with the virtio-9p-device.
The root cause is that we're creating a single temporary dir, via the
construct/destruct callbacks, and this temp dir is kept for the entire
qos-test run.
We can change each test to clean after themselves. This approach would
make the 'create' tests obsolete since we would need to create and
delete dirs/files/symlinks for the cleanup, turning them into the
'unlinkat' tests that comes right after.
We chose a different approach that handles the root cause: do not use
constructor/destructor to create the temp dir. Create one temp dir for
each test, and remove it after the test is complete. This is the
approach taken for other qtests like vhost-user-test.c where each test
requires a setup() and a subsequent cleanup(), all of those instantiated
in the .before callback.
[1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20240327142011.805728-2-dbarboza@ventanamicro.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Add a small test to prevent regressions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240325192436.561154-5-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Previously, bdrv_pad_request() could not deal with a NULL qiov when
a read needed to be aligned. During prefetch, a stream job will pass a
NULL qiov. Add a test case to cover this scenario.
By accident, also covers a previous race during shutdown, where block
graph changes during iteration in bdrv_flush_all() could lead to
unreferencing the wrong block driver state and an assertion failure
later.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-5-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 157 and 227 use the virtio-blk device, so we have to mark these
tests accordingly to be skipped if this devices is not available (e.g.
when running the tests with qemu-system-avr only).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240325154737.1305063-1-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
-----BEGIN PGP SIGNATURE-----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=lfZM
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu into staging
* Fix timeouts in Travis-CI jobs
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYBhdgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVcfA/9FulEN4HrjD3ObyboA+WfibXURwChui98
# 8LvL/fAGe3BZXQtspuNmPyrKRtIOrIwHJyFuxf2N5+8BuvGhEHQIuvIhQIj/rvfy
# X14KlldmQ3w3HlI3Ud4YiebLyK3AAFC2ApIywzFsnN+HoaHJR2EyDIb+T7OsGJZf
# ZLE/Z7qANxoNeZ+a3+rQR3SVpijyS3fXxDSaILrq2uW4kCCs/55O8Rt3Qb+PFSVd
# fF+OlpG6o+z73ACZc1u9Io4IO1ZZc/NdkmDTNz4HknkvJLTLF6kOECAxLl0ytgAG
# YRzBGKes29Zpa9wn/9rc75/OYNS0Ks+B19sQnijWUNX0zq5FkReXNXiyVcbT7d4p
# 6jFzlFnjj4ifB8uQkZTGcx/lL4s4VkPzF+f7fgHq9CKNrNsx8uca0TyQ8s4y+NGb
# C98kJdHd+QhCcuNnAbifCwuFaxQ8C4BdgzxVbU/sGDKNkINNkiTp+uue4TxnRKvV
# MfhqdnWRvqgZ0Rl4TxqcNfODK72Z1YNv3933OKE/mRJYS1Q529TIq4vfp8WIMsWQ
# 7+ipo4WKXhkiSOJZD6AkCoFum1W8yaDzUDJTw2Xt2bPBL3+FXcQyKkKVUMfzIJ8M
# KLe0Bb9W/pYU1ToTciTP0dkQF/02tG0Vik273445wPgH0x8OyHJkPF/ny1a7lKFO
# 5jreYdMxWdc=
# =lfZM
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Mar 2024 14:10:32 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Test TEST AND SET
target/s390x: Use mutable temporary value for op_ts
libqos/virtio.c: Correct 'flags' reading in qvirtqueue_kick
misc/pca955*: Move models under hw/gpio
aspeed: Make the ast1030-a1 SoC not user creatable
aspeed: Make the ast2600-a3 SoC not user creatable
hw/microblaze: Do not allow xlnx-zynqmp-pmu-soc to be created by the user
.travis.yml: Remove the unused xfslib-dev package
.travis.yml: Shorten the runtime of the problematic jobs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity points out that g_setenv() can fail and we don't
check for this in qtest_inproc_init(). In practice this will
only fail if a memory allocation failed in setenv() or if
the caller passed an invalid architecture name (e.g. one
with an '=' in it), so rather than requiring the callsite
to check for failure, make g_setenv() failure fatal here,
similarly to what we did in commit aca68d95c5.
Resolves: Coverity CID 1497485
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240312183810.557768-8-peter.maydell@linaro.org
In test_compute_wait() we do
double units = bkt.max / 10;
which does an integer division and then assigns it to a double variable,
and similarly later on in the expression for an assertion.
Use 10.0 so that we do a floating point division and calculate the
exact value, rather than doing an integer division.
Spotted by Coverity.
Resolves: Coverity CID 1432564
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240312183810.557768-7-peter.maydell@linaro.org
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240318202722.20675-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In qvirtqueue_kick(), the 'flags' were previously being incorrectly read from
vq->avail instead of the correct vq->used location. This update ensures 'flags'
are read from the correct location as per the virtio standard.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240320090442.267525-1-zheyuma97@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In socket_check_afunix_support() we call socket(PF_UNIX, SOCK_STREAM, 0)
to see if it works, but we call close() on the result whether it
worked or not. Only close the fd if the socket() call succeeded.
Spotted by Coverity.
Resolves: Coverity CID 1497481
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-3-peter.maydell@linaro.org
In test_rx() and test_tx() we allocate a GString *cmd_line
but never free it. This is pretty harmless in a test case, but
Coverity spotted it.
Resolves: Coverity CID 1507122
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-2-peter.maydell@linaro.org
This reverts commit decdc76772 in full
and also the relevant migration-tests from
7a09f09283.
After the addition of the new QAPI-based migration address API in 8.2
we've been converting an "fd:" URI into a SocketAddress, missing the
fact that the "fd:" syntax could also be used for a plain file instead
of a socket. This is a problem because the SocketAddress is part of
the API, so we're effectively asking users to create a "socket"
channel to pass in a plain file.
The easiest way to fix this situation is to deprecate the usage of
both SocketAddress and "fd:" when used with a plain file for
migration. Since this has been possible since 8.2, we can wait until
9.1 to deprecate it.
For 9.0, however, we should avoid adding further support to migration
to a plain file using the old "fd:" syntax or the new SocketAddress
API, and instead require the usage of either the old-style "file:" URI
or the FileMigrationArgs::filename field of the new API with the
"/dev/fdset/NN" syntax, both of which are already supported.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240319210941.1907-1-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
PAuth makes run timeout on CI so add tests using 'max' without
it and with impdef one.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-4-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
PAuth makes run timeout on CI so add tests using 'max' without it
and with impdef one.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-3-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
sbsa-ref is supposed to emulate real hardware so virtio-rng-pci
does not fit here
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-2-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We now have CI job to build those and publish in space with
readable urls.
Firmware is built using Debian 'bookworm' cross toolchain (gcc 12.2.0).
Used versions:
- Trusted Firmware v2.10.2
- Tianocore EDK2 stable202402
- Tianocore EDK2 Platforms code commit 085c2fb
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-1-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since the ciphers can be dynamically disabled at runtime, when running
unit tests it is helpful to report which ciphers we can skipped for
testing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This improves the error diagnosis from the unit test when a cipher
is unexpected not available from
ERROR:../tests/unit/test-crypto-cipher.c:683:test_cipher: assertion failed: (err == NULL)
Bail out! ERROR:../tests/unit/test-crypto-cipher.c:683:test_cipher: assertion failed: (err == NULL)
Aborted (core dumped)
to
Unexpected error in qcrypto_cipher_ctx_new() at ../crypto/cipher-gcrypt.c.inc:262:
./build//tests/unit/test-crypto-cipher: Cannot initialize cipher: Invalid cipher algorithm
Aborted (core dumped)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some minor fixes plus a big patchset from Igor fixing
a regression with windows.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmX4NzsPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkp0H/1foAaDYrApMiIkji4aI94bq/fwTnu5CshNP
+YEzwJCS4qbl67/Ix2Z+xVz7twjQbgGdLd6hb9ZypAQfclUk5tDoKyCmqHtQMakX
T080FayOvWmUEostAw7MXvuz0HpJlgnJaJBn29l1hHjA/XXahKqcc705cup+W8hv
F7xb6AoFcbdETMzNaoqekNaHiiYyQPITY9p/UYPLzj2zyLsspR9kBebIeA1yhtXw
Tmc3+FMquoM2fMNxpwfhCBswg662MlOXhLN3dmyLqeJRl09x1GvaeJIGMY2MbefM
RMMv0/jqwAyii5HXew2rPIbLdULGq+hSjZo2NOlx3EOjTCaOkXc=
=XGMp
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: bugfixes
Some minor fixes plus a big patchset from Igor fixing
a regression with windows.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmX4NzsPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkp0H/1foAaDYrApMiIkji4aI94bq/fwTnu5CshNP
# +YEzwJCS4qbl67/Ix2Z+xVz7twjQbgGdLd6hb9ZypAQfclUk5tDoKyCmqHtQMakX
# T080FayOvWmUEostAw7MXvuz0HpJlgnJaJBn29l1hHjA/XXahKqcc705cup+W8hv
# F7xb6AoFcbdETMzNaoqekNaHiiYyQPITY9p/UYPLzj2zyLsspR9kBebIeA1yhtXw
# Tmc3+FMquoM2fMNxpwfhCBswg662MlOXhLN3dmyLqeJRl09x1GvaeJIGMY2MbefM
# RMMv0/jqwAyii5HXew2rPIbLdULGq+hSjZo2NOlx3EOjTCaOkXc=
# =XGMp
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Mar 2024 12:44:43 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (24 commits)
smbios: add extra comments to smbios_get_table_legacy()
tests: acpi: update expected SSDT.dimmpxm blob
pc/q35: set SMBIOS entry point type to 'auto' by default
tests: acpi/smbios: whitelist expected blobs
smbios: error out when building type 4 table is not possible
smbios: in case of entry point is 'auto' try to build v2 tables 1st
smbios: extend smbios-entry-point-type with 'auto' value
smbios: clear smbios_type4_count before building tables
smbios: get rid of global smbios_ep_type
smbios: handle errors consistently
smbios: build legacy mode code only for 'pc' machine
smbios: rename/expose structures/bitmaps used by both legacy and modern code
smbios: add smbios_add_usr_blob_size() helper
smbios: don't check type4 structures in legacy mode
smbios: avoid mangling user provided tables
smbios: get rid of smbios_legacy global
smbios: get rid of smbios_smp_sockets global
smbios: cleanup smbios_get_tables() from legacy handling
tests: smbios: add test for legacy mode CLI options
tests: smbios: add test for -smbios type=11 option
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
address shift is caused by switch to 32-bit SMBIOS entry point
which has slightly different size from 64-bit one and happens
to trigger a bit different memory layout.
Expected diff:
- Name (MEMA, 0x07FFE000)
+ Name (MEMA, 0x07FFF000)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-19-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately having 2.0 machine type deprecated is not enough
to get rid of legacy SMBIOS handling since 'isapc' also uses
that and it's staying around.
Hence add test for CLI options handling to be sure that it
ain't broken during SMBIOS code refactoring.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cureently it not possible to run SMBIOS test without ACPI one,
which gets into the way when testing ACPI-less configs.
Extract SMBIOS testing into separate routines that could also
be run without ACPI dependency and use that for testing SMBIOS.
As the 1st user add "acpi/piix4/smbios-options" test case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Failure was noticed when running the tests for the qcow2 image format.
Fixes: 0bd779e27e ("crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240216101415.293769-1-f.ebner@proxmox.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests that use "--blockdev" with the "file" driver cannot work with
other protocols, so we should mark them accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-10-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 263, 284 and detect-zeroes-registered-buf use qemu-io
with --image-opts so we have to enforce IMGOPTSSYNTAX=true here
to get $TEST_IMG in shape for other protocols than "file".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-9-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These tests 188, 189 and 198 use qemu-io with --image-opts with additional
hard-coded parameters for the file protocol, so they cannot work for other
protocols. Thus we have to limit these tests to the file protocol only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-8-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test fails completely when you try to use it with a different
protocol, e.g. with "./check -ssh -qcow2 156".
The test uses some hand-crafted JSON statements which cannot work with other
protocols, thus let's change this test to only support the 'file' protocol.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-7-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b25b387fa5 updated the iotests 134 and 158 to use the --image-opts
parameter for qemu-io with file protocol related options, but forgot to
update the _supported_proto line accordingly. So let's do that now.
Fixes: b25b387fa5 ("qcow2: convert QCow2 to use QCryptoBlock for encryption")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-6-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using "-drive ...,backing.file.filename=..." only works with the
file protocol, but not with URIs, so mark this test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-5-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 114 uses "truncate" and the qcow2.py script on the destination file,
which both cannot deal with URIs. Thus this test needs the "file" protocol,
otherwise it fails with an error message like this:
truncate: cannot open 'ssh://127.0.0.1/tmp/qemu-build/tests/qemu-iotests/scratch/qcow2-ssh-114/t.qcow2.orig'
for writing: No such file or directory
Thus mark this test for "file protocol only" accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-4-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The hand-crafted json statement in this test only works if the test
is run with the "file" protocol, so mark this test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-3-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running iotest 033 with the ssh protocol, it fails with:
033 fail [14:48:31] [14:48:41] 10.2s output mismatch
--- /.../tests/qemu-iotests/033.out
+++ /.../tests/qemu-iotests/scratch/qcow2-ssh-033/033.out.bad
@@ -174,6 +174,7 @@
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 512/512 bytes at offset 2097152
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: warning: Failed to truncate the tail of the image: ssh driver does not support shrinking files
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
We already check for the qcow2 format here, so let's simply also
add a check for the protocol here, too, to only test the truncation
with the file protocol.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-2-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running the command `qemu-img snapshot -l SNAPSHOT` the output of
VM_CLOCK (measures the offset between host and VM clock) cannot to
accommodate values in the order of thousands (4-digit).
This line [1] hints on the problem. Additionally, the column width for
the VM_CLOCK field was reduced from 15 to 13 spaces in commit b39847a5
in line [2], resulting in a shortage of space.
[1]:
https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L753
[2]:
https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L763
This patch restores the column width to 15 spaces and makes adjustments
to the affected iotests accordingly. Furthermore, addresses a potential
source
of confusion by removing whitespace in column headers. Example, VM CLOCK
is modified to VM_CLOCK. Additionally a '--' symbol is introduced when
ICOUNT returns no output for clarity.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2062
Fixes: b39847a505 ("migration: introduce icount field for snapshots")
Signed-off-by: Abhiram Tilak <atp.exp@gmail.com>
Message-ID: <20240123050354.22152-2-atp.exp@gmail.com>
[kwolf: Fixed up qemu-iotests 261 and 286]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This replicates the scenario in which the bug was reported.
Unfortunately this relies on actually executing a guest (so that the
firmware initialises the virtio-blk device and moves it to its
configured iothread), so this can't make use of the qtest accelerator
like most other test cases. I tried to find a different easy way to
trigger the bug, but couldn't find one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240314165825.40261-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- fix the over rebuilding of test VMs
- support Xfer:siginfo:read in gdbstub
- fix double close() in gdbstub
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXxkb0ACgkQ+9DbCVqe
KkSw9wf+K+3kJYaZ2unEFku3Y6f4Z9XkrZCsFQFVNIJQgpYVc6peQyLUB1pZwzZc
yoQhmTIgej16iRZc7gEcJhFl2zlX2vulE/m+wiaR0Chv3E2r510AGn4aWl+GLB9+
/WduHaz1NobPW4JWaarxespa84Re8QZQgqkHX4nwYd++FW63E4uxydL4F1nmSNca
eTA6RwS48h4wqPzHBX72hYTRUnYrDUSSGCGUDzK3NHumuPi+AQ77GLRMO0MTYFfy
hWriapogCmghY+Xtn++eUIwDyh1CCnUT6Ntf5Qj06bZ+f6eaTwINM8QWhj9mxYX+
5/F5Q4JJDqRPYw/hF4wYXRsiZxTYFw==
=BOWW
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-final-130324-1' of https://gitlab.com/stsquad/qemu into staging
final updates for 9.0 (testing, gdbstub):
- fix the over rebuilding of test VMs
- support Xfer:siginfo:read in gdbstub
- fix double close() in gdbstub
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXxkb0ACgkQ+9DbCVqe
# KkSw9wf+K+3kJYaZ2unEFku3Y6f4Z9XkrZCsFQFVNIJQgpYVc6peQyLUB1pZwzZc
# yoQhmTIgej16iRZc7gEcJhFl2zlX2vulE/m+wiaR0Chv3E2r510AGn4aWl+GLB9+
# /WduHaz1NobPW4JWaarxespa84Re8QZQgqkHX4nwYd++FW63E4uxydL4F1nmSNca
# eTA6RwS48h4wqPzHBX72hYTRUnYrDUSSGCGUDzK3NHumuPi+AQ77GLRMO0MTYFfy
# hWriapogCmghY+Xtn++eUIwDyh1CCnUT6Ntf5Qj06bZ+f6eaTwINM8QWhj9mxYX+
# 5/F5Q4JJDqRPYw/hF4wYXRsiZxTYFw==
# =BOWW
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Mar 2024 11:45:01 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-final-130324-1' of https://gitlab.com/stsquad/qemu:
gdbstub: Fix double close() of the follow-fork-mode socket
tests/tcg: Add multiarch test for Xfer:siginfo:read stub
gdbstub: Add Xfer:siginfo:read stub
gdbstub: Save target's siginfo
linux-user: Move tswap_siginfo out of target code
gdbstub: Rename back gdb_handlesig
tests/vm: ensure we build everything by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
+jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
=C0UU
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
Add multiarch test for testing if Xfer:siginfo:read query is properly
handled by gdbstub.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-6-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The "check" target by itself is not enough to ensure we build the user
mode binaries. While we can't test them with check-tcg we can at least
include them in the build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Gustavo Romero <gustavo.romero@linaro.org>
Currently the default input range can extend to 64 bits. On x86,
when the virtio-iommu protects vfio devices, the physical iommu
may support only 39 bits. Let's set the default to 39, as done
for the intel-iommu.
We use hw_compat_8_2 to handle the compatibility for machines
before 9.0 which used to have a virtio-iommu default input range
of 64 bits.
Of course if aw-bits is set from the command line, the default
is overriden.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240307134445.92296-8-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
query-cpu-model-comparison, query-cpu-model-baseline, and
query-cpu-model-expansion take CpuModelInfo arguments. Errors in
@props members of these arguments are reported for 'props', without
further context. For instance, s390x rejects
{"execute": "query-cpu-model-comparison", "arguments": {"modela": {"name": "z13", "props": {}}, "modelb": {"name": "z14", "props": []}}}
with
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'props', expected: object"}}
This is unusual; the common QAPI unmarshaling machinery would complain
about 'modelb.props'. Our hand-written code to visit the @props
member neglects to provide the context.
Tweak it so it provides it. The command above now fails with
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'modelb.props', expected: dict"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-4-armbru@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
CpuModelInfo member @props is semantically a mapping from name to
value, and syntactically a JSON object on the wire. This translates
to QDict in C. Since the QAPI schema language lacks the means to
express 'object', we use 'any' instead. This is QObject in C.
Commands taking a CpuModelInfo argument need to check the QObject is a
QDict.
For arm, riscv, and s390x, the code checks right before passing the
QObject to visit_start_struct(). visit_start_struct() then checks
again.
Delete the first check.
The error message for @props that are not an object changes slightly
to the the message we get for this kind of type error in other
contexts. Minor improvement.
Additionally, error messages about members of @props now refer to
'props.prop-name' instead of just 'prop-name'. Another minor
improvement.
Both changes are visible in tests/qtest/arm-cpu-features.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-2-armbru@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[Drop #include now superfluous]
Now that zero page checking is done on the multifd sender threads by
default, we still provide an option for backward compatibility. This
change adds a qtest migration test case to set the zero-page-detection
option to "legacy" and run multifd migration with zero page checking on the
migration main thread.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-8-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
The support for "parameter=0" SMP configurations is removed, and QEMU
returns error for those cases.
So add the related test cases to ensure parameters can't accept 0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-14-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The smp_props.has_clusters in MachineClass is not a user configured
field, and it indicates if user specifies "clusters" in -smp.
After -smp parsing, other module could aware if the cluster level
is configured by user. This is used when the machine has only 1 cluster
since there's only 1 cluster by default.
Add the check to cover this field.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-13-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, -smp supports up to 7-levels topology hierarchy:
-drawers/books/sockets/dies/clusters/cores/threads.
Though no machine supports all these 7 levels yet, these 7 levels have
the strict containment relationship and together form the generic CPU
topology representation of QEMU.
Also, note that the maxcpus is calculated by multiplying all 7 levels:
maxcpus = drawers * books * sockets * dies * clusters *
cores * threads.
To cover this code path, it is necessary to test the full topology case
(with all 7 levels). This also helps to avoid introducing new issues by
further expanding the CPU topology in the future.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-12-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since s390 machine supports both "drawers" and "books" in -smp, add the
"drawers" and "books" combination test case to match the actual topology
usage scenario.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-11-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Although drawer was introduced to -smp along with book by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-10-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Although book was introduced to -smp along with drawer by s390 machine,
as a general topology level in QEMU that may be reused by other arches
in the future, it is desirable to cover this parameter's parsing in a
separate case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-9-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, -smp supports 2 more new levels: book and drawer.
It is necessary to consider the effects of book and drawer in the test
cases to ensure that the calculations are correct. This is also the
preparation to add new book and drawer test cases.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-8-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The q35 machine is trying to support up to 4096 vCPUs [1], so it's
necessary to bump max_cpus in test-smp-parse to 4096 to cover the
topological needs of future machines.
[1]: https://lore.kernel.org/qemu-devel/20240228143351.3967-1-anisinha@redhat.com/
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-7-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use MAX_CPUS/MIN_CPUS macros in invalid topology case. This gives us the
flexibility to change the maximum and minimum CPU limits.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Xiaoling Song <xiaoling.song@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-6-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Unsupported "parameter=1" SMP configurations is marked as deprecated,
so drop the related test case.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-5-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Running test-fcvtmod triggers the following deprecation warning:
warning: CPU property 'Zfa' is deprecated. Please use 'zfa' instead
Let's fix that.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240229180656.1208881-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a RISC-V 'virt' machine to the graph. This implementation is a
modified copy of the existing arm machine in arm-virt-machine.c
It contains a virtio-mmio and a generic-pcihost controller. The
generic-pcihost controller hardcodes assumptions from the ARM 'virt'
machine, like ecam and pio_base addresses, so we'll add an extra step to
set its parameters after creating it.
Our command line is incremented with 'aclint' parameters to allow the
machine to run MSI tests.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While the 8-bit input elements are sequential in the input vector,
the 32-bit output elements are not sequential in the output matrix.
Do not attempt to compute 2 32-bit outputs at the same time.
Cc: qemu-stable@nongnu.org
Fixes: 23a5e3859f ("target/arm: Implement SME integer outer product")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2083
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240305163931.242795-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The testcase contains :
- `test_idr_reset_value()` :
Checks the reset values of MODER, OTYPER, PUPDR, ODR and IDR.
- `test_gpio_output_mode()` :
Checks that writing a bit in register ODR results in the corresponding
pin rising or lowering, if this pin is configured in output mode.
- `test_gpio_input_mode()` :
Checks that a input pin set high or low externally results
in the pin rising and lowering.
- `test_pull_up_pull_down()` :
Checks that a floating pin in pull-up/down mode is actually high/down.
- `test_push_pull()` :
Checks that a pin set externally is disconnected when configured in
push-pull output mode, and can't be set externally while in this mode.
- `test_open_drain()` :
Checks that a pin set externally high is disconnected when configured
in open-drain output mode, and can't be set high while in this mode.
- `test_bsrr_brr()` :
Checks that writing to BSRR and BRR has the desired result in ODR.
- `test_clock_enable()` :
Checks that GPIO clock is at the right frequency after enabling it.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240305210444.310665-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now, it simply performs instruction, bb and mem count, and ensure
that inline vs callback versions have the same result. Later, we'll
extend it when new inline operations are added.
Use existing plugins to test everything works is a bit cumbersome, as
different events are treated in different plugins. Thus, this new one.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-6-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-19-alex.bennee@linaro.org>
Add follow-fork-mode child and and follow-fork-mode parent tests.
Check for the obvious pitfalls, such as lingering breakpoints,
catchpoints, and single-step mode.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-13-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-14-alex.bennee@linaro.org>
We "fixed" a bug with LTO builds with 100c459f19 (tests/qtest: bump
up QOS_PATH_MAX_ELEMENT_SIZE) but it seems it has triggered again.
The array is sized according to the maximum anticipated length of a
path on the graph. However, the worst case for a depth-first search is
to push all nodes on the graph. So it's not really LTO, it depends on
the ordering of the constructors.
Lets be more assertive raising QOS_PATH_MAX_ELEMENT_SIZE to make it go
away again.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1186 (again)
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-2-alex.bennee@linaro.org>
Tests:
- the ability to change the sysclk of the device
- the ability to enable/disable/configure the PLLs
- if the clock multiplexers work
- the register flags and the generation of irqs
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240303140643.81957-9-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Simple testcase for validating proper operation of read and write for all
three BSC controllers.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240224191038.2409945-4-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Bryan's fix on multifd compression level API
- Fabiano's mapped-ram series (base + multifd only)
- Steve's amend on cpr document in qapi/
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZeUjKhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbv5QD/ZexBUsmZA5qyxgGvZ2yvlUBEGNOvtmKY
kRdiYPU7khMA/0N43rn4LcqKCoq4+T+EAnYizGjIyhH/7BRUyn4DUxgO
=AeEn
-----END PGP SIGNATURE-----
Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Migartion pull request for 20240304
- Bryan's fix on multifd compression level API
- Fabiano's mapped-ram series (base + multifd only)
- Steve's amend on cpr document in qapi/
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZeUjKhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbv5QD/ZexBUsmZA5qyxgGvZ2yvlUBEGNOvtmKY
# kRdiYPU7khMA/0N43rn4LcqKCoq4+T+EAnYizGjIyhH/7BRUyn4DUxgO
# =AeEn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Mar 2024 01:26:02 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (27 commits)
migration/multifd: Document two places for mapped-ram
tests/qtest/migration: Add a multifd + mapped-ram migration test
migration/multifd: Add mapped-ram support to fd: URI
migration/multifd: Support incoming mapped-ram stream format
migration/multifd: Support outgoing mapped-ram stream format
migration/multifd: Prepare multifd sync for mapped-ram migration
migration/multifd: Add incoming QIOChannelFile support
migration/multifd: Add outgoing QIOChannelFile support
migration/multifd: Add a wrapper for channels_created
migration/multifd: Allow receiving pages without packets
migration/multifd: Allow multifd without packets
migration/multifd: Decouple recv method from pages
migration/multifd: Rename MultiFDSend|RecvParams::data to compress_data
tests/qtest/migration: Add tests for mapped-ram file-based migration
migration/ram: Add incoming 'mapped-ram' migration
migration/ram: Add outgoing 'mapped-ram' migration
migration: Add mapped-ram URI compatibility check
migration/ram: Introduce 'mapped-ram' migration capability
migration/qemu-file: add utility methods for working with seekable channels
io: fsync before closing a file channel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# migration/ram.c
We use section "Returns" for documenting both success and error
response of commands.
I intend to generate better command success response documentation.
Easier when "Returns" documents just he success response.
Create new section tag "Errors". The next two commits will move error
response documentation from "Returns" sections to "Errors" sections.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-4-armbru@redhat.com>
Change "'Returns:' is only valid for commands" to "'Returns' section
is only valid for commands".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-3-armbru@redhat.com>
Add a regression test for a recently fixed issue, where shmat()
desynced the guest and the host view of the address space and caused
open("/proc/self/maps") to SEGV.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <jwyuvao4apydvykmsnvacwshdgy3ixv7qvkh4dbxm3jkwgnttw@k4wpaayou7oq>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
test-util-sockets leaves the temporary socket files around in the
temporary files folder. Let's better remove them at the end of the
testing.
Fixes: 4d3a329af5 ("tests/util-sockets: add abstract unix socket cases")
Message-ID: <20240226082728.249753-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In qvring_init() we're writing vq->used->avail_event at "vq->used + 2 +
array_size". The struct pointed by vq->used is, from virtio_ring.h
Linux header):
* // A ring of used descriptor heads with free-running index.
* __virtio16 used_flags;
* __virtio16 used_idx;
* struct vring_used_elem used[num];
* __virtio16 avail_event_idx;
So 'flags' is the word right at vq->used. 'idx' is vq->used + 2. We need
to skip 'used_idx' by adding + 2 bytes, and then sum the vector size, to
reach avail_event_idx. An example on how to properly access this field
can be found in qvirtqueue_kick():
avail_event = qvirtio_readw(d, qts, vq->used + 4 +
sizeof(struct vring_used_elem) * vq->size);
This error was detected when enabling the RISC-V 'virt' libqos machine.
The 'idx' test from vhost-user-blk-test.c errors out with a timeout in
qvirtio_wait_used_elem(). The timeout happens because when processing
the first element, 'avail_event' is read in qvirtqueue_kick() as non-zero
because we didn't initialize it properly (and the memory at that point
happened to be non-zero). 'idx' is 0.
All of this makes this condition fail because "idx - avail_event" will
overflow and be non-zero:
/* < 1 because we add elements to avail queue one by one */
if ((flags & VRING_USED_F_NO_NOTIFY) == 0 &&
(!vq->event || (uint16_t)(idx-avail_event) < 1)) {
d->bus->virtqueue_kick(d, vq);
}
As a result the virtqueue is never kicked and we'll timeout waiting for it.
Fixes: 1053587c3f ("libqos: Added EVENT_IDX support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-3-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The loop isn't setting the values for the last element. Every other
element is being initialized with addr = 0, flags = VRING_DESC_F_NEXT
and next = i + 1. The last elem is never touched.
This became a problem when enabling a RISC-V 'virt' libqos machine in
the 'indirect' test of virti-blk-test.c. The 'flags' for the last
element will end up being an odd number (since we didn't touch it).
Being an odd number it will be mistaken by VRING_DESC_F_NEXT, which
happens to be 1.
Deep into hw/virt/virtio.c, in virtqueue_split_pop(), into
virtqueue_split_read_next_desc(), a check for VRING_DESC_F_NEXT will be
made to see if we're supposed to chain. The code will keep up chaining
in the last element because the uninitialized value happens to be odd.
We'll error out right after that because desc->next (which is also
uninitialized) will be >= max. A VIRTQUEUE_READ_DESC_ERROR will be
returned, with an error message like this in the stderr:
qemu-system-riscv64: Desc next is 49391
Since we never returned, we'll end up timing out at qvirtio_wait_used_elem():
ERROR:../tests/qtest/libqos/virtio.c:236:qvirtio_wait_used_elem:
assertion failed: (g_get_monotonic_time() - start_time <= timeout_us)
The root cause is using uninitialized values from guest_alloc() in
qvring_indirect_desc_setup(). There's no guarantee that the memory pages
retrieved will be zeroed, so we can't make assumptions. In fact, commit
5b4f72f5e8 ("tests/qtest: properly initialise the vring used idx") fixed a
similar problem stating "It is probably not wise to assume guest memory
is zeroed anyway". I concur.
Initialize all elems in qvring_indirect_desc_setup().
Fixes: f294b029aa ("libqos: Added indirect descriptor support to virtio implementation")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-2-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When guest page size > host page size, this test can fail
due to the SIGBUS protection hack. Avoid this by making
sure that the file size is at least one guest page.
Visible with alpha guest on x86_64 host.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-26-richard.henderson@linaro.org>
These tests are confused, because -p does not change
the guest page size, but the host page size.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-25-richard.henderson@linaro.org>
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
-----BEGIN PGP SIGNATURE-----
iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
=P2QF
-----END PGP SIGNATURE-----
Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
# -----BEGIN PGP SIGNATURE-----
#
# iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
# HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
# =P2QF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Feb 2024 05:11:10 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (25 commits)
migration: Use migrate_has_error() in close_return_path_on_source()
migration: Join the return path thread before releasing to_dst_file
migration: Fix qmp_query_migrate mbps value
migration: options incompatible with cpr
migration: update cpr-reboot description
migration: stop vm for cpr
migration: notifier error checking
migration: refactor migrate_fd_connect failures
migration: per-mode notifiers
migration: MigrationNotifyFunc
migration: remove postcopy_after_devices
migration: MigrationEvent for notifiers
migration: convert to NotifierWithReturn
migration: remove error from notifier data
notify: pass error to notifier with return
migration/multifd: Drop unnecessary helper to destroy IOC
migration/multifd: Cleanup outgoing_args in state destroy
migration/multifd: Make multifd_channel_connect() return void
migration/multifd: Drop registered_yank
migration/multifd: Cleanup TLS iochannel referencing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This ensure we at least read every register the plugin API reports at
least once during the check-tcg checks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-25-alex.bennee@linaro.org>
The old links are dead so even if we have the ISO cached we can't
finish the install. Update to the current stable and tweak the install
strings.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2192
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-5-alex.bennee@linaro.org>
The main problem is that "check-venv" is a .PHONY target will always
evaluate and trigger a full re-build of the VM images. While its
tempting to drop it from the dependencies that does introduce a
breakage on freshly configured builds.
Fortunately we do have the otherwise redundant --force flag for the
script which up until now was always on. If we make the usage of
--force conditional on dependencies other than check-venv triggering
the update we can avoid the costly rebuild and still run cleanly on a
fresh checkout.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2118
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-4-alex.bennee@linaro.org>
This is less than ideal but easier than making sure we get all the
iterations of the memory test. Update the comment accordingly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-3-alex.bennee@linaro.org>
My default header template is GPLv3 but for QEMU code we really should
stick to GPLv2-or-later (allowing others to up-license it if they
wish). While this is test code we should still be consistent on the
source distribution.
I wrote all of this code so its not a problem. However there remains
one GPLv3 file left which is the crt0-tc2x.S for TriCore.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-2-alex.bennee@linaro.org>
The fd URI supports an fd that is backed by a file. The code should
select between QIOChannelFile and QIOChannelSocket, depending on the
type of the fd. Add a test for that.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Next patch adds another fd test. Rename the existing one closer to
what's used on other tests, with the 'precopy' prefix.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Message-id: 20240226000259.2752893-31-sergey.kambalin@auriga.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Comment out use of USB, which depends on PCI]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds a QTest that verifies each input line of a specific
EXTI OR gate can influence the output line.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240220184145.106107-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QAPIDoc stores a reference to QAPIParser just to pass it to
QAPIParseError. The resulting error position depends on the state of
the parser. It happens to be the current comment line. Servicable,
but action at a distance.
The commit before previous moved most uses of QAPIParseError from
QAPIDoc to QAPIParser. There are just three left. Convert them to
QAPISemError. This involves passing info to a few methods. Then drop
the reference to QAPIParser.
The three errors lose the column number. Not really interesting here:
it's the comment line's indentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-17-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The parser recognizes only the first "Features:" line. Any subsequent
ones are treated as ordinary text, as visible in test case
doc-duplicate-features. Recognize "Features:" lines anywhere. A
second one is an error.
A 'Features:' line without any features is useless, but not an error.
Make it an error. This makes detecting a second "Features:" line
easier.
qapi/run-state.json actually has an instance of this since commit
fe17522d85 (qapi: Remove deprecated 'singlestep' member of
StatusInfo). Clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-16-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The parser mostly doesn't create adjacent untagged sections, and
merging the ones it does create is hardly worth the bother. I'm doing
it to avoid behavioral change in the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Putting a blank line before section tags and 'Features:' is good,
existing practice. Enforce it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By convention, we indent the second and subsequent lines of
descriptions and tagged sections, except for examples.
Turn this into a hard rule, and apply it to examples, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Straightforward conflicts in qapi/migration.json resolved]
docs/devel/qapi-code-gen.txt claims "A heading line must be the first
line of the documentation comment block" since commit
55ec69f8b1 (docs/devel/qapi-code-gen.txt: Update to new rST backend
conventions). Not true, we have code to make it work anywhere in a
free-form doc comment: commit dcdc07a97c (qapi: Make section headings
start a new doc comment block).
Make it true, for simplicity's sake.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-10-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the previous commit, QAPIDoc.Section.name is either
None (untagged section) or the section's tag string ('Returns',
'@name', ...). Rename it to .tag.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Improve the message for an empty tagged section from
empty doc section 'Note'
to
text required after 'Note:'
and the message for an empty argument or feature description from
empty doc section 'foo'
to
text required after '@foo:'
Improve the error position to refer to the beginning of the empty
section instead of its end.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When something other than a command has a "Returns" section, the error
message points to the beginning of the definition comment. Point to
the "Returns" section instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When documented arguments don't exist, the error message points to the
beginning of the definition comment. Point to the first bogus
argument description instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-6-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A 'Features:' line without any features is useless, but not an error
now. However, a later commit will make it one, because that makes
rejecting duplicate 'Features:' easier.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't actually recognize the second 'Features:' line. Instead, we
treat it as an untagged section.
If it was followed by feature description, we'd reject that like
"description of '@feat2:' follows a section". Less than clear.
To be improved shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-3-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The test compares Sphinx plain-text output against a golden reference.
To work on Windows hosts, it filters out carriage returns in both
files. Unfortunately, the filter doesn't work: it creates an empty
file. Comparing empty files always succeeds.
Fix the filter, and update the golden reference to current Sphinx
output.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-2-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tests the following for both P9 and P10:
- I2C master POR status
- I2C master status after immediate reset
Tests the following for powernv10-ranier only:
- Config pca9552 hotplug device pins as inputs then
Read the INPUT0/1 registers to verify all pins are high
- Connected GPIO pin tests of P10 PCA9552 device. Tests
output of pins 0-4 affect input of pins 5-9 respectively.
- PCA9554 GPIO pins test. Tests input and ouput functionality.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The pca9552 INPUT0 and INPUT1 registers are supposed to
hold the logical values of the LED pins. A logical 0
should be seen in the INPUT0/1 registers for a pin when
its corresponding LSn bits are set to 0, which is also
the state needed for turning on an LED in a typical
usage scenario. Existing code was doing the opposite
and setting INPUT0/1 bit to a 1 when the LSn bit was
set to 0, so this commit fixes that.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The powernv and pseries machines both provide hypervisor facilities
that are supported by KVM. This is a large and complicated set of
features that don't get much system-level testing in ppc tests.
Add a new test case for these which runs QEMU KVM inside the target.
This downloads an Alpine VM image, boots it and downloads and installs
the qemu package, then boots a virtual machine under it, re-using the
original Alpine VM image.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
ppc has no avocado tests for the KVM backend. Add a KVM boot_linux.py
test for pseries.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER CPUs support hash and radix MMU modes. Linux supports running in
either mode, but defaults to radix. To keep up testing of QEMU's hash
MMU implementation, add some Linux hash boot tests.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The expected MTD partition detection output does not always appear on
the console, despite the test reaching the boot loader and the string
appearing in dmesg. Possibly due to an init script that quietens the
console output. Using an earlier log message improves reliability.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc64 and s390x tests were first marked skipIf GITLAB_CI by commit
c0c8687ef0 ("tests/avocado: disable BootLinuxPPC64 test in CI"), and
commit 0f26d94ec9 ("tests/acceptance: skip s390x_ccw_vrtio_tcg on
GitLab") due to being very heavy-weight for gitlab CI.
Commit 9b45cc9931 ("docs/devel: rationalise unstable gitlab tests under
FLAKY_TESTS") changed this to being flaky but it isn't really, it just
had a long runtime.
So take the SPEED=slow variable from qtests and introduce it to avocado,
and make these tests require it.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
We don't support 32-bit Windows any more, so we don't need to defend it
with this CI job.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240222130920.362517-3-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling with "configure --without-default-devices", the
dbus-display-test fails since it implicitly assumes that the
machine comes with a default console.
There doesn't seem to be an easy way to figure this during build time,
so skip the tests requiring the Console interface at runtime.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240221073759.171443-1-marcandre.lureau@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If "configure" has been run with "--without-default-devices", there is
no e1000 device in the binaries, so the boot-serial-test currently fails
in that case since it tries to use the e1000 with the sam460ex machine.
Since we're testing the serial output here, and not the NIC, let's
simply switch to the "pci-bridge" device here instead, which should
always be there for PCI-based machines like the sam460ex.
Message-ID: <20240219111030.384158-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cdrom test skips to execute on LoongArch system with command
"make check", this patch enables cdrom test for LoongArch virt
machine platform.
With this patch, cdrom test passes to run on LoongArch virt
machine type.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240217100230.134042-1-maobibo@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It ensures dbus-display1.c will not be recompiled.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240214-dbus-v7-3-7eff29f04c34@daynix.com>
Since commit effd60c8 changed how QMP commands are processed, the order
of the block-commit return value and job events in iotests 144 wasn't
fixed and more and caused the test to fail intermittently.
Change the test to cache events first and then print them in a
predefined order.
Waiting three times for JOB_STATUS_CHANGE is a bit uglier than just
waiting for the JOB_STATUS_CHANGE that has "status": "ready", but the
tooling we have doesn't seem to allow the latter easily.
Fixes: effd60c878
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2126
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20240209173103.239994-1-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead
of 8xx. Also fix comments referencing this and values expecting 8xx.
Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8
Signed-Off-By: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240208194759.2858582-2-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently QEMU will warn if there is a NIC on the board that
is not connected to a backend. By default the '-nic user' will
get used for all NICs, but if you manually connect a specific
NIC to a specific backend, then the other NICs on the board
have no backend and will be warned about:
qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer
qemu-system-arm: warning: nic npcm-gmac.0 has no peer
qemu-system-arm: warning: nic npcm-gmac.1 has no peer
So suppress those warnings by manually connecting every NIC
on the board to some backend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240206171231.396392-3-peter.maydell@linaro.org
Allow changes to the virt GTDT -- we are going to add the IRQ
entry for a new timer to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240122143537.233498-2-peter.maydell@linaro.org
We deliberately don't include qtests_npcm7xx in qtests_aarch64,
because we already get the coverage of those tests via qtests_arm,
and we don't want to use extra CI minutes testing them twice.
In commit 327b680877 we added it to qtests_aarch64; revert
that change.
Fixes: 327b680877 ("tests/qtest: Creating qtest for GMAC Module")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206163043.315535-1-peter.maydell@linaro.org
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
/dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
+Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
=K4b1
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
# w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
# /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
# mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
# +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
# zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
# =K4b1
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits)
MAINTAINERS: Switch to my Enfabrica email
virtio-gpu-rutabaga.c: override resource_destroy method
virtio-gpu.c: add resource_destroy class method
hw/display/virtio-gpu.c: use reset_bh class method
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Standardize all references on CXL r3.1 and minor updates
hw/cxl: Update mailbox status registers.
hw/cxl: Update RAS Capability Definitions for version 3.
hw/cxl: Update link register definitions.
hw/cxl: Update HDM Decoder capability to version 3
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
hw/mem/cxl_type3: Fix potential divide by zero reported by coverity
hw/cxl: Pass NULL for a NULL MemoryRegionOps
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
hw/cxl/mbox: Remove dead code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
_STA will now return 0xB (in common with most other devices)
rather than not setting the bits to indicate this fake device
has not been enabled, and self tests haven't passed.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-13-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The _STA value returned currently indicates the ACPI0017 device
is not enabled. Whilst this isn't a real device, setting _STA
like this may prevent an OS from enumerating it correctly and
hence from parsing the CEDT table.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-11-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the instructions in bios-tables-test, this lists that IVRS.ivrs
in ACPI table will be changed to add new IVHD type 0x11.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-6-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_socket() and make_udp_socket() return a file descriptor on
success, -1 on failure. The check misinterprets 0 as failure. Fix
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The __linux__ version of qemu_chr_open_pp_fd() tries to claim the
parport device with a PPCLAIM ioctl(). On success, it stores the file
descriptor in the chardev object, and returns success. On failure, it
closes the file descriptor, and returns failure.
chardev_new() then passes the Chardev to object_unref(). This duly
calls char_parallel_finalize(), which closes the file descriptor
stored in the chardev object. Since qemu_chr_open_pp_fd() didn't
store it, it's still zero, so this closes standard input. Ooopsie.
To demonstate, add a unit test. With the bug above unfixed, running
this test closes standard input. char_hotswap_test() happens to run
next. It opens a socket, duly gets file descriptor 0, and since it
tests for success with > 0 instead of >= 0, it fails.
The new unit test needs to be conditional exactly like the chardev it
tests. Since the condition is rather complicated, steal the solution
from the serial chardev: define HAVE_CHARDEV_PARALLEL in qemu/osdep.h.
This also permits simplifying chardev/meson.build a bit.
The bug fix is easy enough: store the file descriptor, and leave
closing it to char_parallel_finalize().
The next commit will fix char_hotswap_test()'s test for success.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test fixed up for BSDs, indentation fixed up, commit message improved]
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
-----BEGIN PGP SIGNATURE-----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=61zI
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
- LUKS support for detached headers
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmXGMNUACgkQvobrtBUQ
# T998JQ//SqQ3L/AZmhE5cIwZ1XipSMMZ/yEoVIyniA3tL41S7Oimj3O9XvY68TEG
# nnj9Oh+zOlVLxauTHAczveJ7z+XfonQZS3HrbGRUTHU+ezGVjyM618e/h9pSQtYI
# +CCkrjtey1NoT42/um4D/bKg/B2XQeulS+pD12Z9l5zbqEZiw0R9+UwVIJ52G811
# 5UQgIjJ7GNFzalxqiMCkGc0nTyU8keEXQJcdZ4droo42DnU4pZeQWGDimzP61JnW
# 1Crm6aZSuUriUbVmxJde+2eEdPSR4rr/yQ4Pw06hoi1QJALSgGYtOTo8+qsyumHd
# us/2ouMrxOMdsIk4ViAkSTiaje9agPj84VE1Z229Y/uqZcEAuX572n730/kkzqUv
# ZDKxMz0v3rzpkjFmsgj5D4yqJaQp4zn1zYm98ld7HWJVIOf3GSvpaNg9J6jwN7Gi
# HKKkvYns9pxg3OSx++gqnM32HV6nnMDFiddipl/hTiUsnNlnWyTDSvJoNxIUU5+l
# /uEbbdt8xnxx1JP0LiOhgmz6N6FU7oOpaPuJ5CD8xO2RO8D1uBRvmpFcdOTDAfv0
# uYdjhKBI+quKjE64p7gNWYCoqZtipRIJ6AY2VaPU8XHx8GvGFwBLX64oLYiYtrBG
# gkv3NTHRkMhQw9cGQcZIgZ+OLU+1eNF+m9EV7LUjuKl0HWC3Vjs=
# =61zI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 14:04:05 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
tests: Add case for LUKS volume with detached header
crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS
block: Support detached LUKS header creation using qemu-img
block: Support detached LUKS header creation using blockdev-create
crypto: Modify the qcrypto_block_create to support creation flags
qapi: Make parameter 'file' optional for BlockdevCreateOptionsLUKS
crypto: Support LUKS volume with detached header
io: add trace event when cancelling TLS handshake
chardev: close QIOChannel before unref'ing
docs: re-generate x86_64 ABI compatibility CSV
docs: fix highlighting of CPU ABI header rows
scripts: drop comment about autogenerated CPU API file
softmmu: remove obsolete comment about libvirt timeouts
ui: drop VNC feature _MASK constants
qemu_init: increase NOFILE soft limit on POSIX
crypto: Introduce SM4 symmetric cipher algorithm
meson: sort C warning flags alphabetically
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QAPI generator forces you to document your stuff. Except for
command arguments, event data, and members of enum and object types:
these the generator silently "documents" as "Not documented".
We can't require proper documentation there without first fixing all
the offenders. We've always had too many offenders to pull that off.
Right now, we have more than 500. Worse, we seem to fix old ones no
faster than we add new ones: in the past year, we fixed 22 ones, but
added 26 new ones.
To help arrest the backsliding, make missing documentation an error
unless the command, type, or event is in listed in new pragma
documentation-exceptions.
List all the current offenders: 117 commands and types in qapi/, and 9
in qga/.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
docs/devel/qapi-code-gen demands that the "second and subsequent lines
of sections other than "Example"/"Examples" should be indented".
Commit a937b6aa739q (qapi: Reformat doc comments to conform to current
conventions) missed a few instances, and messed up a few others.
Clean that up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-5-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Avocado needs sqlite3:
Failed to load plugin from module "avocado.plugins.journal":
ImportError("Module 'sqlite3' is not installed.
Use: sudo zypper install python311 to install it")
>From 'zypper info python311':
"This package supplies rich command line features provided by
readline, and sqlite3 support for the interpreter core, thus forming
a so called "extended" runtime."
Include the appropriate package in the lcitool mappings which will
guarantee the dockerfile gets properly updated when lcitool is
run. Also include the updated dockerfile.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240117164227.32143-1-farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-2-alex.bennee@linaro.org>
Also, add a section to the MAINTAINERS file for detached
LUKS header, it only has a test case in it currently.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When querying the LUKS disk with the qemu-img tool or other APIs,
add information about whether the LUKS header is detached.
Additionally, update the test case with the appropriate
modification.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Expand the signature of qcrypto_block_create to enable the
formation of LUKS volumes with detachable headers. To accomplish
that, introduce QCryptoBlockCreateFlags to instruct the creation
process to set the payload_offset_sector to 0.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the SM4 cipher algorithms (OSCCA GB/T 32907-2016).
SM4 (GBT.32907-2016) is a cryptographic standard issued by the
Organization of State Commercial Administration of China (OSCCA)
as an authorized cryptographic algorithms for the use within China.
Detect the SM4 cipher algorithms and enable the feature silently
if it is available.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
=k53l
-----END PGP SIGNATURE-----
Merge tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
# IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
# =k53l
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 08 Feb 2024 03:04:21 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu: (34 commits)
ci: Update comment for migration-compat-aarch64
ci: Remove tag dependency for build-previous-qemu
tests/migration-test: Stick with gicv3 in aarch64 test
migration/multifd: Add a synchronization point for channel creation
migration/multifd: Unify multifd and TLS connection paths
migration/multifd: Move multifd_send_setup into migration thread
migration/multifd: Move multifd_send_setup error handling in to the function
migration/multifd: Remove p->running
migration/multifd: Join the TLS thread
migration: Fix logic of channels and transport compatibility check
migration/multifd: Optimize sender side to be lockless
migration/multifd: Fix MultiFDSendParams.packet_num race
migration/multifd: Stick with send/recv on function names
migration/multifd: Cleanup multifd_load_cleanup()
migration/multifd: Cleanup multifd_save_cleanup()
migration/multifd: Rewrite multifd_queue_page()
migration/multifd: Change retval of multifd_send_pages()
migration/multifd: Change retval of multifd_queue_page()
migration/multifd: Split multifd_send_terminate_threads()
migration/multifd: Forbid spurious wakeups
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If something goes wrong causing the iotests not to cleanup their
temporary directory, it is useful if the dir had an identifying
name to show what is to blame.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240205155158.1843304-1-berrange@redhat.com>
Revieved-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating an instance of the 'TestEnv' class will create a temporary
directory. This dir is only deleted, however, in the __exit__ handler
invoked by a context manager.
In dry-run mode, we don't use the TestEnv via a context manager, so
were leaking the temporary directory. Since meson invokes 'check'
5 times on each configure run, developers /tmp was filling up with
empty temporary directories.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240205154019.1841037-1-berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recently we introduced cross-binary migration test. It's always wanted
that migration-test uses stable guest ABI for both QEMU binaries in this
case, so that both QEMU binaries will be compatible on the migration
stream with the cmdline specified.
Switch to a static gic version "3" rather than using version "max", so that
GIC should be stable now across any future QEMU binaries for migration-test.
Here the version can actually be anything as long as the ABI is stable. We
choose "3" because it's the majority of what we already use in QEMU while
still new enough: "git grep gic-version=3" shows 6 hit, while version 4 has
no direct user yet besides "max".
Note that even with this change, aarch64 won't be able to work yet with
migration cross binary test, but then the only missing piece will be the
stable CPU model.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Unlike on Linux, on FreeBSD renaming a file when the destination
already exists results in an IN_DELETE event for that existing file:
$ FILEMONITOR_DEBUG=1 build/tests/unit/test-util-filemonitor
Rename /tmp/test-util-filemonitor-K13LI2/fish/one.txt -> /tmp/test-util-filemonitor-K13LI2/two.txt
Event id=200000000 event=2 file=one.txt
Queue event id 200000000 event 2 file one.txt
Queue event id 100000000 event 2 file two.txt
Queue event id 100000002 event 2 file two.txt
Queue event id 100000000 event 0 file two.txt
Queue event id 100000002 event 0 file two.txt
Event id=100000000 event=0 file=two.txt
Expected event 0 but got 2
This difference in behavior is not expected to break the real users, so
teach the test to accept it.
Suggested-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240206002344.12372-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
After console_sshd_config(), the SSH server needs to be nudged to pick
up the new configs. The scripts for the other BSD flavors already do
this with a reboot, but a simple reload is sufficient.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240206002344.12372-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
make vm-build-freebsd sometimes fails with "Connection timed out during
banner exchange". The client strace shows:
13:59:30 write(3, "SSH-2.0-OpenSSH_9.3\r\n", 21) = 21
13:59:30 getpid() = 252655
13:59:30 poll([{fd=3, events=POLLIN}], 1, 5000) = 1 ([{fd=3, revents=POLLIN}])
13:59:32 read(3, "S", 1) = 1
13:59:32 poll([{fd=3, events=POLLIN}], 1, 3625) = 1 ([{fd=3, revents=POLLIN}])
13:59:32 read(3, "S", 1) = 1
13:59:32 poll([{fd=3, events=POLLIN}], 1, 3625) = 1 ([{fd=3, revents=POLLIN}])
13:59:32 read(3, "H", 1) = 1
There is a 2s delay during connection, and ConnectTimeout is set to 1.
Raising it makes the issue go away, but we can do better. The server
truss shows:
888: 27.811414714 socket(PF_INET,SOCK_DGRAM|SOCK_CLOEXEC,0) = 5 (0x5)
888: 27.811765030 connect(5,{ AF_INET 10.0.2.3:53 },16) = 0 (0x0)
888: 27.812166941 sendto(5,"\^Z/\^A\0\0\^A\0\0\0\0\0\0\^A2"...,39,0,NULL,0) = 39 (0x27)
888: 29.363970743 poll({ 5/POLLRDNORM },1,5000) = 1 (0x1)
So the delay is due to a DNS query. Disable DNS queries in the server
config.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240206002344.12372-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check the CVB's, CVBY's, and CVBG's corner cases.
Co-developed-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240205205830.6425-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The `if not probe_proc_self_mem` check never passes, because
probe_proc_self_mem is a function object, which is a truthy value.
Add parentheses in order to perform a function call.
Fixes: dc84d50a7f9b ("tests/tcg: Add the PROT_NONE gdbstub test")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240131220245.235993-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Also update the test to specify which device to attach the test socket
to, and remove the comment lamenting the fact that we can't do so.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
- Created qtest to check initialization of registers in GMAC Module.
- Implemented test into Build File.
Change-Id: I8b2fe152d3987a7eec4cf6a1d25ba92e75a5391d
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-4-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test program is the last use of any variable length array in the
codebase. If we can get rid of all uses of VLAs we can make the
compiler error on new additions. This is a defensive measure against
security bugs where an on-stack dynamic allocation isn't correctly
size-checked (e.g. CVE-2021-3527).
In this case the test code didn't even want a variable-sized
array, it was just accidentally using syntax that gave it one.
(The array size for C has to be an actual constant expression,
not just something that happens to be known to be constant...)
Remove the VLA usage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240125173211.1786196-2-peter.maydell@linaro.org
In kernel commit 5d5b4e8c2d9ec ("arm64/sve: Report FEAT_SVE_B16B16 to
userspace") Linux added ID_AA64ZFR0_el1.B16B16 to the set of ID
register fields which it exposes to userspace. Update our
exported_bits mask to include this.
(This doesn't yet change any behaviour for us, because we don't yet
have any CPUs that implement this feature, which is part of SVE2.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240125134304.1470404-1-peter.maydell@linaro.org
* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
controller bridge
-----BEGIN PGP SIGNATURE-----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=0C5S
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging
aspeed queue:
* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
controller bridge
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmW7Sa8ACgkQUaNDx8/7
# 7KG7mw/8DbMJY6aqgq5YANszzem1ktJphPCNxq081cbczCOUpCNX4aL+0/ANvxxD
# lbJQB+SZeIRmuFbxYPhq68rtzB4vG7tsQpns4H33EPKT4vuzF70lq4fgptMiun3q
# 1ZJ2LF3jonvQWdhbC17wzAQz0FFb4F7XOxz++UL4okPsgzsYItnd+TWs8q7+erRb
# 84UwN+eBTBAl/FiNk679/tBTqAfCVGgQ7dzotr4f3tg5POvrGOrlEjAn0O+dGGDj
# wgILmpEBsTsilRB1tz8Kw0j/v/VkHz1DJu45lRAV9CIrN22iKcjMilNGgNDT8kcI
# yAlxAw3iN+hVFqDov8wFPjDYd/Qw2oRAPy2Kd14hW9xL8zBOTms1JK5L0PS2+Feo
# ZjMJ2cOJq3t4Wt1ZXRhgHfF4ANwP0OZ/y9bHCy3CkBljEeiTQbikHP9gVV4qHXZH
# 4Q0HnDZQwAgobw3CmZ8jVx1dQueqy3ycuvkhCyv3S0l/tdbtXDtr5pNNu3dAP/PJ
# 3nifLdRImhDvxxO9GKaCdUVLzELzMJl0GrgAsVJPKVnKHA4IiVKmB+XcW9IUbfy/
# 3zA2wHJLrEF+MF6MsuNcEYCCqUvyNLm7rUrXk1wNLXpCJ35bbW5IYy7Ty/8E2GHb
# D5Cv/EPNhMBiNA4+HqQlMOTC13Ozv2qwCuWYCh2Ik8mnzaEiyTo=
# =0C5S
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:35:11 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu:
hw/fsi: Update MAINTAINER list
hw/fsi: Added FSI documentation
hw/fsi: Added qtest
hw/arm: Hook up FSI module in AST2600
hw/fsi: Aspeed APB2OPB & On-chip peripheral bus
hw/fsi: Introduce IBM's FSI master
hw/fsi: Introduce IBM's cfam
hw/fsi: Introduce IBM's fsi-slave model
hw/fsi: Introduce IBM's FSI Bus
hw/fsi: Introduce IBM's scratchpad device
hw/fsi: Introduce IBM's Local bus
hw/arm/aspeed: Check for CPU types in machine_run_board_init()
hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper
hw/arm/aspeed: Init CPU defaults in a common helper
hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus()
hw/arm/aspeed: Remove dead code
tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added basic qtests for FSI model.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[ clg: aspeed-fsi-test.c -> aspeed_fsi-test.c to match other filenames ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Compared to mainline buildroot, these images have some customization :
- Linux version is bumped to 6.6.3 and built with a custom config
- U-Boot is switched to the one provided by OpenBMC for more support
- defconfigs extra tools for dev
See branch [1] for more details.
There are a few changes since last update, commit ed1f5ff842. Images
all have a password now and I2C devices have been updated in the Linux
ast2600-evb device tree [2]. Do the necessary adjustements.
[1] https://github.com/legoater/buildroot/commits/aspeed-2023.11
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9deb10cf160e
Signed-off-by: Cédric Le Goater <clg@kaod.org>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmW6NScPHG1qdEB0bHMu
bXNrLnJ1AAoJEHAbT2saaT5ZdQYH/2fhfhZotH0V2qAcMxlOoHbAE9UhZNRsSYtf
QFP0GXFYFAMm7LHkPUbvKgO7LylKWAOMn/zKZqgj1Vf1EpoKQ2FwLtR/buDz86Ec
pi2OrDPRA7Ay5c3ow3YZZkUOhQTTcR5rNjYctPtt/J4j8ol/z5vre7weJIg2bCJe
zI7vIVg7iFFzbkXY20KHngJ5nDC+aEm7WaGlxAP8kfkvy324Wy9O2k8qu2J5zbLT
HGvh3rwEDvRTYe4CaKFFHWNV0m4092HAr/dJBobugI5VZ6QQpK6Tgy8N+4ZrCHD2
SjUKeym85VTOYGuY8b18fk5MQK2SzsfBUJ4x8VGC75W4mJ8agdc=
=HImO
-----END PGP SIGNATURE-----
Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging
trivial patches for 2024-01-31
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmW6NScPHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZdQYH/2fhfhZotH0V2qAcMxlOoHbAE9UhZNRsSYtf
# QFP0GXFYFAMm7LHkPUbvKgO7LylKWAOMn/zKZqgj1Vf1EpoKQ2FwLtR/buDz86Ec
# pi2OrDPRA7Ay5c3ow3YZZkUOhQTTcR5rNjYctPtt/J4j8ol/z5vre7weJIg2bCJe
# zI7vIVg7iFFzbkXY20KHngJ5nDC+aEm7WaGlxAP8kfkvy324Wy9O2k8qu2J5zbLT
# HGvh3rwEDvRTYe4CaKFFHWNV0m4092HAr/dJBobugI5VZ6QQpK6Tgy8N+4ZrCHD2
# SjUKeym85VTOYGuY8b18fk5MQK2SzsfBUJ4x8VGC75W4mJ8agdc=
# =HImO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Jan 2024 11:55:19 GMT
# gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (21 commits)
hw/hyperv: Include missing headers
hw/intc/xics: Include missing 'cpu.h' header
hw/arm: Add `\n` to hint message
hw/loongarch: Add `\n` to hint message
hw/i386: Add `\n` to hint message
backends/hostmem: Fix block comments style (checkpatch.pl warnings)
misc: Clean up includes
riscv: Clean up includes
cxl: Clean up includes
include: Clean up includes
m68k: Clean up includes
acpi: Clean up includes
aspeed: Clean up includes
disas/riscv: Clean up includes
hyperv: Clean up includes
scripts/clean-includes: Update exclude list
mailmap: Fix Stefan Weil email
qemu-docs: Update options for graphical frontends
qapi/migration.json: Fix the member name for MigrationCapability
colo: examples: remove mentions of script= and (wrong) downscript=
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----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=Tl7c
-----END PGP SIGNATURE-----
Merge tag 'qga-pull-2024-01-30' of https://github.com/kostyanf14/qemu into staging
qga-pull-2024-01-30
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmW409sACgkQ711egWG6
# hOc0PxAAj0Lhgt70OpAGQd5ERBgdRbh2/pJkKvdWBZvUAkVyFEp6Wn1UEC9aRpdi
# g8KCfYWVpp4LKMm5Ok1/8MKzAKT0jJFKatX0iZy/sx5M0A7x2/cJWgTv69L41Ld3
# FoJM/a/te8VUSk/jPKMqf4G7BzqYyHDnAlcnLjnvUsUabnocjmpSSckCNWLtQ/Sz
# RCGOwaTJ4HKW9O7yuw4gcXeYf2G21UemkITLh7Kdv/6fqqlg3k2gRSQeQ11Xh9Tc
# Jst7511vs+9AvDVM67o84z6UQwlp+23IJb3PBG2Td+Odr7BDAturWE4yyqPtjcpf
# Kcy6uMO6ZNYSW9CAspIF271fObLBPdvvMCHabar8x3LwF/6SxdnVRnWbqVsY/LSZ
# j76VB7TashwxzgqXEqmSrJmCSiCU4L7k8+KU0XxqIg4howlHzoRlejuMZzVK8Hyt
# Cu5tqa6yq8+twxzP4qQhkvazGgYgWo/xNaZ8D3h6xxxZ4NE/hN24YodtyFV/NGWE
# VSvUpzTKettECcyPo3OGezOqcr0vW5Z776MQOsMQWAjwm3bjM8hMzuKglnJe7Lt4
# DAbreHQ5s+pELQnq/cv7AVAr3zy2AIpPq4xDPJUHunAh+kMFY3cHCNaKytiRqmf+
# kZtd4nSN9j5+0oE5jSiuPn9C96y3shGL95XR6WW0nN1ImWOVgx4=
# =Tl7c
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 30 Jan 2024 10:47:55 GMT
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2024-01-30' of https://github.com/kostyanf14/qemu:
qga: Solaris has net/if_arp.h and netinet/if_ether.h but not ETHER_ADDR_LEN
qga-win: Fix guest-get-fsinfo multi-disks collection
tests/unit/test-qga: do not qualify executable paths
guest-agent: improve help for --allow-rpcs and --block-rpcs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
guest-exec invocation does not need the full path of the executable to
execute. Using only the command names ensures correct execution of the
test on systems not adhering to the FHS.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Make sure that qemu gdbstub, like gdbserver, allows reading from and
writing to PROT_NONE pages.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240129093410.3151-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both the report() function as well as the initial gdbstub test sequence
are copy-pasted into ~10 files with slight modifications. This
indicates that they are indeed generic, so factor them out. While
at it, add a few newlines to make the formatting closer to PEP-8.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240129093410.3151-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no need to use the Linux-internal __u64 type, 1ULL is
guaranteed to be wide enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240117160313.175609-1-pbonzini@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
If socket path is too long (longer than 108 bytes), socket can't be
opened. This might lead to failure when test dir path is long enough.
Make sure socket is created in iotests.sock_dir to avoid such a case.
This commit basically aligns iotests/277 with the rest of iotests.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20240124162257.168325-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since Python 3.11 asyncio.TimeoutError is an alias for TimeoutError, but
in older versions it's not. We really have to catch asyncio.TimeoutError
here, otherwise a slow test run will fail (as has happened multiple
times on CI recently).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125152150.42389-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're seeing timeouts for this test on CI runs (specifically for
ubuntu-20.04-s390x-all). It doesn't fail consistently, but even the
successful runs take about 27 or 28 seconds, which is not very far from
the 30 seconds timeout.
Bump the timeout a bit to make failure less likely even on this CI host.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125165803.48373-1-kwolf@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If socket path is too long (longer than 108 bytes), socket can't be
opened. This might lead to failure when test dir path is long enough.
Make sure socket is created in iotests.sock_dir to avoid such a case.
This commit basically aligns iotests/264 with the rest of iotests.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20240125135237.189493-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not
polled during nested event loops. The coroutine currently reschedules
itself in the main loop's qemu_aio_context AioContext, which is polled
during nested event loops. One known problem is that QMP device-add
calls drain_call_rcu(), which temporarily drops the BQL, leading to all
sorts of havoc like other vCPU threads re-entering device emulation code
while another vCPU thread is waiting in device emulation code with
aio_poll().
Paolo Bonzini suggested running non-coroutine QMP handlers in the
iohandler AioContext. This avoids trouble with nested event loops. His
original idea was to move coroutine rescheduling to
monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch()
because we don't know if the QMP handler needs to run in coroutine
context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have
been nicer since it's associated with the monitor implementation and not
as general as qmp_dispatch(), which is also used by qemu-ga.
A number of qemu-iotests need updated .out files because the order of
QMP events vs QMP responses has changed.
Solves Issue #1933.
Cc: qemu-stable@nongnu.org
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985
Buglink: https://issues.redhat.com/browse/RHEL-17369
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The common.qemu bash functions allow tests to interact with the QMP
monitor of a QEMU process. I spent two days trying to update 141 when
the order of the test output changed, but found it would still fail
occassionally because printf() and QMP events race with synchronous QMP
communication.
I gave up and ported 141 to the existing Python API for QMP tests. The
Python API is less affected by the order in which QEMU prints output
because it does not print all QMP traffic by default.
The next commit changes the order in which QMP messages are received.
Make 141 reliable first.
Cc: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a filter function for QMP responses that contain QEMU's
automatically generated node ids. The ids change between runs and must
be masked in the reference output.
The next commit will use this new function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're still seeing timeouts in qtests that use a TCG payload with TCI
on a slow k8s runner:
https://gitlab.com/qemu-project/qemu/-/jobs/5990992722
So we should bump the timeout of cdrom-test to see whether that
fixes the issue.
Now, cdrom-test, as bios-tables-test, pxe-test and vmgenid-test use
the boot_sector_test() function for running a TCG payload. That
function already uses an internal timeout of 600 seconds with
the remark that the test could be slow with TCI.
Thus from the outer meson test runner side, we should not use less
than 600 seconds as timeout values for these tests. Let's bump them
on the meson side to 610 seconds so that the tests themselves can
run with their internal 600 seconds timeout and have some additional
seconds on top for reporting the outcome.
Message-ID: <20240124084412.465638-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test-iov code uses usleep() with small values (<= 30) in some
nested loops with many iterations. This causes a small delay on OSes
like Linux that have a precise sleeping mechanism, but on systems
like NetBSD and OpenBSD, each usleep() call takes multiple microseconds,
which then sum up in a total test time of multiple minutes!
Looking at the code, the usleep() does not really seem to be necessary
here - if not enough data could be send, we should simply always use
select() to wait 'til we can send more. Thus remove the usleep() and
re-arrange the code a little bit to make it more clear what is going
on here.
Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240122153347.71654-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On the slow k8s CI runner, the test sometimes takes more than 240
seconds. See for example this run here where it took ~ 267 seconds:
https://gitlab.com/qemu-project/qemu/-/jobs/5806087027#L4769
Thus we have to bump the timeout here even further to be on the
safe side. Let's use 360 seconds which should hopefully really be
high enough now.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2097
Message-ID: <20240123110353.30658-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This update includes support for privileged instructions.
Signed-off-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Tested-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Message-Id: <20240114232354.4109231-1-bcain@quicinc.com>
When icount and ibreak exceptions are due to happen on the same address
icount has higher precedence.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231130171920.3798954-3-jcmvbkbc@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since the pkgsrc-2023Q3 release [*], the py-expat package has been
merged into the base 'python' package:
- Several packages have been folded into base packages. While the
result is simpler, those updating may need to force-remove the
secondary packages, depending on the update method. When doing
make replace, one has to pkg_delete -f the secondary packages.
pkgin handles at least the python packages correctly, removing the
split package when updating python. Specific packages and the
former packages now included:
* cairo: cairo-gobject
* python: py-cElementTree py-curses py-cursespanel py-expat
py-readline py-sqlite3
Remove py311-expat from the package list in order to avoid:
### Installing packages ...
processing remote summary (http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All)...
database for http://cdn.NetBSD.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All is up-to-date
py311-expat is not available in the repository
...
calculating dependencies.../py311-expat is not available in the repository
pkg_install error log can be found in /var/db/pkgin/pkg_install-err.log
[*] https://mail-index.netbsd.org/netbsd-announce/2024/01/01/msg000360.html
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2109
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240117140746.23511-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This command has been deprecated before the 8.1 release,
in commit e9ccfdd91d ("hmp: Add 'one-insn-per-tb' command
equivalent to 'singlestep'"). Time to drop it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Dr. David Alan Gilbert" <dave@treblig.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This member has been deprecated before the 8.1 release, in commit
34c18203d4 ("qmp: Deprecate 'singlestep' member of StatusInfo").
Time to drop it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By default, the timeout to receive any specified event from the QEMU VM is 60
seconds set by the python avocado test framework. Please see event_wait() and
events_wait() in python/qemu/machine/machine.py. If the matching event is not
triggered within that interval, an asyncio.TimeoutError is generated. Since the
timeout for the bits avocado test is 200 secs, we need to make event_wait()
timeout of the same value as well so that an early timeout is not triggered by
the avocado framework.
CC: peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2077
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240117042556.3360190-1-anisinha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
make check-tcg fails on Fedora with:
vtimer.c:9:10: fatal error: inttypes.h: No such file or directory
Fedora has a minimal aarch64 cross-compiler, which satisfies the
configure checks, so it's chosen instead of the dockerized one.
There is no cross-version of inttypes.h, however.
Fix by using stdint.h instead. The test does not require anything
from inttypes.h anyway.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240108125030.58569-1-iii@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The npcm7xx_watchdog_timer-test can take more than 60 seconds in
SPEED=slow mode on a loaded host system.
Bumping to 2 minutes will give more headroom.
Message-ID: <20240112164717.1063954-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test_prescaler() part in the npcm7xx_watchdog_timer test is quite
repetitive, testing all possible combinations of the WTCLK and WTIS
bitfields. Since each test spins up a new instance of QEMU, this is
rather an expensive test, especially on loaded host systems.
For the normal quick test mode, it should be sufficient to test the
corner settings of these fields (i.e. 0 and 3), so we can speed up
this test in the default mode quite a bit.
Message-ID: <20240115070223.30178-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running with TCI, the boot-serial-test can take longer than 3 minutes:
https://gitlab.com/qemu-project/qemu/-/jobs/5890481086#L4774
Bump the timeout to 4 minutes to avoid CI failures here.
Message-ID: <20240115071146.31213-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've found the source of flakiness in this test, so re-enable it.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20230606144551.24367-4-farosas@suse.de
[peterx: rebase to 2a61a6964c, to use migration_test_add()]
Signed-off-by: Peter Xu <peterx@redhat.com>
Replace the tests registration with the new function that prints tests
names.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-8-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Our usage of gtest results in us losing the very basic functionality
of "knowing which test failed". The issue is that gtest only prints
test names ("paths" in gtest parlance) once the test has finished, but
we use asserts in the tests and crash gtest itself before it can print
anything. We also use a final abort when the result of g_test_run is
not 0.
Depending on how the test failed/broke we can see the function that
trigged the abort, which may be representative of the test, but it
could also just be some generic function.
We have been relying on the primitive method of looking at the name of
the previous successful test and then looking at the code to figure
out which test should have come next.
Add a wrapper to the test registration that does the job of printing
the test name before running.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We're currently just asserting when incoming migration fails. Let's
print the error message from QMP as well.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240104142144.9680-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
- add LE microblaze test to avocado
- use modern snapshot=on to avoid trashing disk image
- use plain bool for fe_is_open
- various updates to qtest timeouts
- enable meson test timeouts
- tweak the readthedocs environment
- partially revert un-flaking x86_64
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWhPccACgkQ+9DbCVqe
KkS5agf+OoW6HOitt34YeL6cGGtIKaxbta+Fs6jq+ucIbN63TmLTuKrmPiRNxjuo
Fj2Qvh9R7Tl7Q/a7ZAym0Fze7GtsvvsidkiQS4pmi9vYuJrhS734CxXHT8JS6zJr
ymQ0nGZODg1cVB4oAR9sXo/OwEQdDTSgKp8wdNr930fxYwokUKBUgcOqElu3SWHv
duSYDuaflnP5B8ZGbb1ZnOlwS9lZIHTwjZyN5J1YtxF0T8Ez4A+xseEOpQ/00MoE
Ecjdp3ELCxzOI+1U33Yni7ol//fxQpRKi+xf2fGIxhuSA3i32rmY5NWTvl7VwuS1
gXryjX2rukSujySP3vkdtTp0dmkbpg==
=ZuDd
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-updates-120124-2' of https://gitlab.com/stsquad/qemu into staging
testing and misc updates
- add LE microblaze test to avocado
- use modern snapshot=on to avoid trashing disk image
- use plain bool for fe_is_open
- various updates to qtest timeouts
- enable meson test timeouts
- tweak the readthedocs environment
- partially revert un-flaking x86_64
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWhPccACgkQ+9DbCVqe
# KkS5agf+OoW6HOitt34YeL6cGGtIKaxbta+Fs6jq+ucIbN63TmLTuKrmPiRNxjuo
# Fj2Qvh9R7Tl7Q/a7ZAym0Fze7GtsvvsidkiQS4pmi9vYuJrhS734CxXHT8JS6zJr
# ymQ0nGZODg1cVB4oAR9sXo/OwEQdDTSgKp8wdNr930fxYwokUKBUgcOqElu3SWHv
# duSYDuaflnP5B8ZGbb1ZnOlwS9lZIHTwjZyN5J1YtxF0T8Ez4A+xseEOpQ/00MoE
# Ecjdp3ELCxzOI+1U33Yni7ol//fxQpRKi+xf2fGIxhuSA3i32rmY5NWTvl7VwuS1
# gXryjX2rukSujySP3vkdtTp0dmkbpg==
# =ZuDd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 12 Jan 2024 13:25:27 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-updates-120124-2' of https://gitlab.com/stsquad/qemu: (22 commits)
tests/avocado: partially revert unmasking of replay_linux tests
readthodocs: fully specify a build environment
mtest2make: stop disabling meson test timeouts
tests/fp: Bump fp-test-mulAdd test timeout to 3 minutes
tests/unit: Bump test-crypto-block test timeout to 5 minutes
tests/unit: Bump test-aio-multithread test timeout to 2 minutes
tests/qtest: Bump the device-introspect-test timeout to 12 minutes
qtest: bump bios-table-test timeout to 9 minutes
qtest: bump aspeed_smc-test timeout to 6 minutes
qtest: bump qos-test timeout to 2 minutes
qtest: bump boot-serial-test timeout to 3 minutes
qtest: bump prom-env-test timeout to 6 minutes
qtest: bump pxe-test timeout to 10 minutes
qtest: bump test-hmp timeout to 4 minutes
qtest: bump npcm7xx_pwm-test timeout to 5 minutes
qtest: bump qom-test timeout to 15 minutes
qtest: bump migration-test timeout to 8 minutes
qtest: bump min meson timeout to 60 seconds
chardev: use bool for fe_is_open
gitlab: include microblazeel in testing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix device presence checking in the virtio-ccw qtest
* Support codespell checking in checkpatch.pl
* Fix emulation of LAE s390x instruction
* Work around htags bug when environment is large
* Some other small clean-ups here and there
-----BEGIN PGP SIGNATURE-----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=F/j2
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu into staging
* Fix non-deterministic failures of the 'netdev-socket' qtest
* Fix device presence checking in the virtio-ccw qtest
* Support codespell checking in checkpatch.pl
* Fix emulation of LAE s390x instruction
* Work around htags bug when environment is large
* Some other small clean-ups here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWgHlgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXAnBAAjQve/Jmfp9p8eQmswG7cl/a2TuJ59b9X
# SFRja2PprV/Wp4kxxEJX4er9F2+rlMusNL62LBp/QjZi9u4lCvCmuB7sMa0wEkjr
# BPPBrkxkAT+/8vhGpYg2GrxZv/UOLkycp3sjEp4v5yXWQw+OEBnkZZ+AuHddpnEr
# NKMKss71uQmccvuzD5FMDfbJQcSBD/yGPyFfDrv1RKreYRlbkEDVlcVoZpfoMwQY
# Pl167iDdmjVtsT+4wf8vHo5W/AYKDOjlV6AoujCnJVZnGx6BtDLiF/iNJ/VU1Ty5
# cRxySPT64HG+cGrbRqz9IjDvs++WW5EQn1jPY8NO2XFz3sney6Cs/pLKjqJY9S7P
# kfOXOBZG3zOI1kgd/CSR5b4szg4XvtTZaupczKiGOpYC9klf0oQNXGU5jXi3Csop
# Q332oUgiPeNdOx/4tXobFX6RwVCqLRYZbHx9RRYSxWlqJJPAB74/n+RZsmOtsxuJ
# RaiPKDmbVlslkUm78gIa5e6DMwDk2wmlkqa64W7VZxyqfQTRDPiPvfMGePkj6tmZ
# h9vUsELwwORlHpZyL08n0fzs3aeIYwzPwhfr+5iQZIawIp4Zqo8i8Lic/WfIlok9
# rmPIA0mjs1VtrUsroItw4NcY04xcVa7hkhz4EbkZROrfGamdkLuvbk2OKuOeoL0U
# lpgtQL6jA7E=
# =F/j2
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 16:59:04 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-01-11' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/buildtest.yml: Work around htags bug when environment is large
tests/tcg/s390x: Test LOAD ADDRESS EXTENDED
target/s390x: Fix LAE setting a wrong access register
scripts/checkpatch: Support codespell checking
hw/s390x/ccw: Replace dirname() with g_path_get_dirname()
hw/s390x/ccw: Replace basename() with g_path_get_basename()
target/s390x/kvm/pv: Provide some more useful information if decryption fails
gitlab: fix s390x tag for avocado-system-centos
tests/qtest/virtio-ccw: Fix device presence checking
qtest: ensure netdev-socket tests have non-overlapping names
net: handle QIOTask completion to report useful error message
net: add explicit info about connecting/listening state
Revert "tests/qtest/netdev-socket: Raise connection timeout to 120 seconds"
Revert "osdep: add getloadavg"
Revert "netdev: set timeout depending on loadavg"
qtest: use correct boolean type for failover property
q800: move dp8393x_prom memory region to Q800MachineState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems we were premature in declaring replay_linux.py fixed. The
x86_64 image still seems to hang occasionally. I've raised a new bug
to cover it:
https://gitlab.com/qemu-project/qemu/-/issues/2094
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode with --enable-debug on a very loaded
system, the fp-test-mulAdd test can take longer than 2 minutes. Bump the
timeout to three minutes to make sure it passes in such situations, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-16-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-crypto-block can take longer than 4 minutes.
Bump the timeout to 5 minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-15-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-aio-multithread can take longer than 1 minute.
Bump the timeout to two minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-14-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When running the test in slow mode on a very loaded system with the
arm/aarch64 target and with --enable-debug, it can take longer than
10 minutes to finish the introspection test. Bump the timeout to twelve
minutes to make sure that it also finishes in such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-13-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This is reliably hitting the current 2 minute timeout in GitLab CI,
and for the TCI job, it even hits a 6 minute timeout.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-12-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-12-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
On a loaded system with --enable-debug, this test can take longer than
5 minutes. Raising the timeout to 6 minutes gives greater headroom for
such situations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Increase the timeout to 6 minutes for very loaded systems]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-11-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The qos-test takes just under 1 minute in a --enable-debug
build. Bumping to 2 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-10-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-10-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The boot-serial-test takes about 1 + 1/2 minutes in a --enable-debug
build. Bumping to 3 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-9-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-9-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The prom-env-test can take more than 5 minutes in a --enable-debug
build on a loaded system. Bumping to 6 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 6 minutes instead of 3]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-8-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The pxe-test uses the boot_sector_test() function, and that already
uses a timeout of 600 seconds. So adjust the timeout on the meson
side accordingly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 600s and adjust commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-7-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The hmp test takes just under 3 minutes in a --enable-debug
build. Bumping to 4 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-6-berrange@redhat.com>
[thuth: fix copy-n-paste error in the description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-6-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The npcm7xx_pwm-test takes 3 & 1/2 minutes in a --enable-debug build.
Bumping to 5 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-5-thuth@redhat.com>
[AJB: s/pwn/pwm]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The qom-test is periodically hitting the 5 minute timeout when running
on the aarch64 emulator under GitLab CI. With an --enable-debug build
it can take over 10 minutes for arm/aarch64 targets. Setting timeout
to 15 minutes gives enough headroom to hopefully make it reliable.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The migration test should take between 1 min 30 and 2 mins on reasonably
modern hardware. The test is not especially compute bound, rather its
running time is dominated by the guest RAM size relative to the
bandwidth cap, which forces each iteration to take at least 30 seconds.
None the less under high load conditions with multiple QEMU processes
spawned and competing with other parallel tests, the worst case running
time might be somewhat extended. Bumping the timeout to 8 minutes gives
us good headroom, while still catching stuck tests relatively quickly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-3-berrange@redhat.com>
[thuth: Bump timeout to 8 minutes to make it work on very loaded systems, too]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Even some of the relatively fast qtests can sometimes hit the 30 second
timeout in GitLab CI under high parallelism/load conditions. Bump the
min to 60 seconds to give a higher margin for reliability.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This ensures the rootfs is never permanently changed as we don't need
persistence between tests anyway.
Message-Id: <20240103173349.398526-3-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We've already got a test for a big endian microblaze machine, but so
far we lack one for a little endian machine. Now that the QEMU advent
calendar featured such an image, we can test the little endian mode,
too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215161851.71508-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
-----BEGIN PGP SIGNATURE-----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=bcZj
-----END PGP SIGNATURE-----
Merge tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu into staging
edk2: update to git snapshot (maybe for-8.2)
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmV5i70ACgkQTLbY7tPo
# cTg5mA//VDjGNmBYWhIhf5c7Z8+h1FspnqkxqResX3KgE2indCWkTlyZnCFGb7CO
# NgDiCR7xKMw9S1Cun14vTs/OK8BVFvmXGhTIgjecK+k6w6D8PtR4QvfXYUKxNajA
# Sd6reWAlojlgKOkpcrejrSSvtBTZqrJc8CrkowMR3FZXzD0GstUCMZ0jBvVhzlO6
# o9RMk0kbf+VNupsA+v9ZWPstMHXjLKs8v1eUqrc6LYOanY6mqQM5Wz9yWteUfrNp
# /0zShBrkmB+BgPoRQypphFdXRacP82fVXDMeTSbbXaReI0PR9MLKZnyk0UUkES6k
# BTtEVEM0cCAYLGaGFjHZVEpbrtFmVBisE0fLgdozsCU8SMCuxjNzXyj0HGRsJ7m4
# UQ+qGJLOR3Zx/Bnz3LLKOmWBlq6MQD5lYgxk3dwSPKzXTqun1ndlVKenJ3Z9fgXQ
# gibVbS/2fNylR9aoPSYkXnlE8l8vSo24sXIn8R2wX8rJ0xBc6bFDs1MKizzv2b9l
# YUeybDwgDvbbDLGSN4DgIeNSZxQBgNO/nmuFnx8jNxTqcNlCJFHO2jR7gPijj5ct
# ZPQQwLCCEIxD3OY3Dg94zXDm1EfWZQpNBFDD/83joJt/15Vu9GLsPqEs4QUdiQsp
# MO4Bd7HFavLSGsyX1rMe0yonWirbRX2uKYmyc+KwGjjS9LRGesU=
# =bcZj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Dec 2023 10:47:25 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu:
tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes
tests/acpi: update expected data files
edk2: update binaries to git snapshot
edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE.
edk2: update to git snapshot
tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a small test to prevent regressions. Userspace runs in primary
mode, so LAE should always set the access register to 0.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240111092328.929421-3-iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An apparent copy-paste error tests for the presence of the
virtio-rng-ccw device in order to perform tests on the virtio-scsi-ccw
device.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Message-ID: <20240106130121.1244993-1-sam@rfc1149.net>
Fixes: 65331bf5d1 ("tests/qtest: Check for virtio-ccw devices before using them")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When naming glib tests if the name of one test is a substring of the
name of another test, it is not possible to use the '-p /the/name'
option to run a single test.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-7-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running 'info network', if the stream backend is still in
the process of connecting, or waiting for an incoming connection,
no information is displayed.
There is also no way to distinguish whether the server is still
in the process of setting up the listener socket, or whether it
is ready to accept incoming client connections.
This leads to a race condition in the netdev-socket qtest which
launches a server process followed by a client process. Under
high load conditions it is possible for the client to attempt
to connect before the server is accepting clients. For the
scenarios which do not set the 'reconnect' option, this opens
up a race which can lead to the test scenario failing to reach
the expected state.
Now that 'info network' can distinguish between initialization
phase and the listening phase, the netdev-socket qtest will
correctly synchronize, such that the client QEMU is not spawned
until the server is ready.
This should solve the non-deterministic failures seen with the
netdev-socket qtest.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-5-berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 0daaf2761f.
The test was not timing out because of slow execution. It was
timing out due to a race condition leading to the client QEMU
attempting (and fatally failing) to connect before the server
QEMU was listening.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-4-berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit cadfc72939.
The test was not timing out because of slow execution. It was
timing out due to a race condition leading to the client QEMU
attempting (and fatally failing) to connect before the server
QEMU was listening.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240104162942.211458-2-berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QMP device_add does not historically validate the parameter types.
At some point it will likely change to enforce correct types, to
match behaviour of -device. The failover property is expected to
be a boolean in JSON.
Signed-off-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240103123005.2400437-1-berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- add a 32 bit x86 replay test case
- fix some typos
- use modern snapshot setting for tests
- update replay_dump for current ABI
- remove stale replay variables
- improve kdoc for ReplayState
- introduce common error path for replay
- always fully drain chardevs when in replay
- catch unexpected waitio on playback
- remove flaky tags from replay_kernel tests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWcAJgACgkQ+9DbCVqe
KkS/TQf+PuIPtuX71ENajfRBjz6450IbGqLUJ1HEaPGYGRj+fR6rg5g5u8qaBrT7
TUv9ef9L22NtyL+Gbs1OGpGDWKoqV6RQc+A/MHa8IKFpcS24nUo3k4psIC6NSGRH
6w3++fPC1Q5cDk9Lei3Qt8fXzcnUZz+NTiIK05aC0xh7D6uGfdADvKqHeLav7qi+
X2ztNdBsy/WJWCuWcMVzb/dGwDBtuyyxvqTD4EF+zn+gSYq9od2G8XdF+0o6ZVLM
mXEHwNwB6UjOkLt2cYaay59SXcJFvwxKbEGTDnA7T+kgd3rknuBaWdVBIazoSPQh
+522nPz5qq/3wO1l7+iQXuvd38fWyw==
=nKRx
-----END PGP SIGNATURE-----
Merge tag 'pull-replay-fixes-080124-1' of https://gitlab.com/stsquad/qemu into staging
Record/replay fixes for replay_kernel tests
- add a 32 bit x86 replay test case
- fix some typos
- use modern snapshot setting for tests
- update replay_dump for current ABI
- remove stale replay variables
- improve kdoc for ReplayState
- introduce common error path for replay
- always fully drain chardevs when in replay
- catch unexpected waitio on playback
- remove flaky tags from replay_kernel tests
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWcAJgACgkQ+9DbCVqe
# KkS/TQf+PuIPtuX71ENajfRBjz6450IbGqLUJ1HEaPGYGRj+fR6rg5g5u8qaBrT7
# TUv9ef9L22NtyL+Gbs1OGpGDWKoqV6RQc+A/MHa8IKFpcS24nUo3k4psIC6NSGRH
# 6w3++fPC1Q5cDk9Lei3Qt8fXzcnUZz+NTiIK05aC0xh7D6uGfdADvKqHeLav7qi+
# X2ztNdBsy/WJWCuWcMVzb/dGwDBtuyyxvqTD4EF+zn+gSYq9od2G8XdF+0o6ZVLM
# mXEHwNwB6UjOkLt2cYaay59SXcJFvwxKbEGTDnA7T+kgd3rknuBaWdVBIazoSPQh
# +522nPz5qq/3wO1l7+iQXuvd38fWyw==
# =nKRx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 08 Jan 2024 14:03:04 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-replay-fixes-080124-1' of https://gitlab.com/stsquad/qemu:
tests/avocado: remove skips from replay_kernel
chardev: force write all when recording replay logs
replay: stop us hanging in rr_wait_io_event
replay/replay-char: use report_sync_error
replay: introduce a central report point for sync errors
replay: make has_unread_data a bool
replay: add proper kdoc for ReplayState
replay: remove host_clock_last
scripts/replay_dump: track total number of instructions
scripts/replay-dump: update to latest format
tests/avocado: modernise the drive args for replay_linux
tests/avocado: fix typo in replay_linux
tests/avocado: add a simple i386 replay kernel test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the latest fixes for #2010 and #2013 these tests look pretty
stable now. Of course the only way to be really sure is to run it in
the CI infrastructure and see what breaks.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-14-alex.bennee@linaro.org>
QEMU complains about us not being explicit with setting snapshot so
lets do that. Also as cdroms are RO media we don't need to jump the
hoops of setting up snapshots and replay disks - just declare the
drive is a cdrom and nothing should change.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-4-alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-3-alex.bennee@linaro.org>
There are a number of bugs against 32 bit x86 on the tracker. Lets at
least establish a baseline pure kernel boot can do record/replay
before we start looking at the devices.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-2-alex.bennee@linaro.org>
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
=sfuM
-----END PGP SIGNATURE-----
Merge tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu into staging
migration 1st pull for 9.0
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
# Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
# =sfuM
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 04 Jan 2024 04:30:07 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration: fix coverity migrate_mode finding
migration/multifd: Remove unnecessary usage of local Error
migration: Remove unnecessary usage of local Error
migration: Fix migration_channel_read_peek() error path
migration/multifd: Remove error_setg() in migration_ioc_process_incoming()
migration/multifd: Fix leaking of Error in TLS error flow
migration/multifd: Simplify multifd_channel_connect() if else statement
migration/multifd: Fix error message in multifd_recv_initial_packet()
migration: Remove errp parameter in migration_fd_process_incoming()
migration: Refactor migration_incoming_setup()
migration: Remove nulling of hostname in migrate_init()
migration: Remove migrate_max_downtime() declaration
tests/qtest: postcopy migration with suspend
tests/qtest: precopy migration with suspend
tests/qtest: option to suspend during migration
tests/qtest: migration events
migration: preserve suspended for bg_migration
migration: preserve suspended for snapshot
migration: preserve suspended runstate
migration: propagate suspended runstate
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test case to verify that the suspended state is handled correctly by
live migration postcopy. The test suspends the src, migrates, then wakes
the dest.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-13-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a test case to verify that the suspended state is handled correctly
during live migration precopy. The test suspends the src, migrates, then
wakes the dest.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-12-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add an option to suspend the src in a-b-bootblock.S, which puts the guest
in S3 state after one round of writing to memory. The option is enabled by
poking a 1 into the suspend_me word in the boot block prior to starting the
src vm. Generate symbol offsets in a-b-bootblock.h so that the suspend_me
offset is known. Generate the bootblock for each test, because suspend_me
may differ for each.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/1704312341-66640-11-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Define a state object to capture events seen by migration tests, to allow
more events to be captured in a subsequent patch, and simplify event
checking in wait_for_migration_pass. No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-10-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
config_all now lists only accelerators, rename it to indicate its actual
content.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
config_targetos is now empty and can be removed; its use in sourcesets
that do not involve target-specific files can be replaced with an empty
dictionary.
In fact, at this point *all* sourcesets that do not involve
target-specific files are just glorified mutable arrays. Enforce that
they never test for symbols in "when:" by computing the set of files
without "strict: false".
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ALU instructions can write to both memory and flags. If the CC_SRC*
and CC_DST locations have been written already when a memory access
causes a fault, the value in CC_SRC* and CC_DST might be interpreted
with the wrong CC_OP (the one that is in effect before the instruction.
Besides just using the wrong result for the flags, something like
subtracting -1 can have disastrous effects if the current CC_OP is
CC_OP_EFLAGS: this is because QEMU does not expect bits outside the ALU
flags to be set in CC_SRC, and env->eflags can end up set to all-ones.
In the case of the attached testcase, this sets IOPL to 3 and would
cause an assertion failure if SUB is moved to the new decoder.
This mechanism is not really needed for BMI instructions, which can
only write to a register, but put it to use anyway for cleanliness.
In the case of BZHI, the code has to be modified slightly to ensure
that decode->cc_src is written, otherwise the new assertions trigger.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While const data in tests is not particularly important,
this makes a grep test clear across the tree.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-71-richard.henderson@linaro.org>
In fact, type4-count, core-count, core-count2, thread-count and
thread-count2 are tested with KVM not TCG.
Rename these test functions to reflect KVM base instead of TCG.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231127160202.1037290-1-zhao1.liu@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The AioContext lock no longer exists.
There is one noteworthy change:
- * More specifically, these functions use BDRV_POLL_WHILE(bs), which
- * requires the caller to be either in the main thread and hold
- * the BlockdriverState (bs) AioContext lock, or directly in the
- * home thread that runs the bs AioContext. Calling them from
- * another thread in another AioContext would cause deadlocks.
+ * More specifically, these functions use BDRV_POLL_WHILE(bs), which requires
+ * the caller to be either in the main thread or directly in the home thread
+ * that runs the bs AioContext. Calling them from another thread in another
+ * AioContext would cause deadlocks.
I am not sure whether deadlocks are still possible. Maybe they have just
moved to the fine-grained locks that have replaced the AioContext. Since
I am not sure if the deadlocks are gone, I have kept the substance
unchanged and just removed mention of the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-15-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the big patch that removes
aio_context_acquire()/aio_context_release() from the block layer and
affected block layer users.
There isn't a clean way to split this patch and the reviewers are likely
the same group of people, so I decided to do it in one patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-ID: <20231205182011.1976568-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stop acquiring/releasing the AioContext lock in
bdrv_graph_wrlock()/bdrv_graph_unlock() since the lock no longer has any
effect.
The distinction between bdrv_graph_wrunlock() and
bdrv_graph_wrunlock_ctx() becomes meaningless and they can be collapsed
into one function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The aio_context_acquire() API is being removed. Drop the test case that
calls the API.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have a few test cases that include tests for corner case aspects of
internal snapshots, but nothing that tests that they actually function
as snapshots or that involves deleting a snapshot. Add a test for this
kind of basic internal snapshot functionality.
The error cases include a regression test for the crash we just fixed
with snapshot operations on inactive images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The fixture buys us exactly nothing, as we need a global variable
anyway, for test_qapi_event_emit(). Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-4-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generated qapi_event_send_FOO() call an event emitter function.
It's test_qapi_event_emit() in this test. It compares the actual
event to the expected event, and sets a flag to record it was called.
The test functions set expected data and clear the flag before calling
qapi_event_send_FOO(), and check the flag afterwards.
Make test_qapi_event_emit() consume expected data, and the test
functions check it was consumed. Delete the flag. This is simpler.
It also catches extraneous calls of test_qapi_event_emit(). Catching
that is not worthwhile, but since the cost is negative...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-3-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mutex @test_event_lock is held from fixture setup to teardown,
protecting global variable @test_event_data. But tests always run one
after the other, so this is superfluous. It also confuses Coverity.
Drop the mutex.
Fixes: CID 1527425
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231122072456.2518816-2-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The npcm7xx_pwm-test can take quite a while when running with
--enable-debug on a loaded system. The tests here are quite
repetitive - by default it should be fine if we only execute
some of them and only execute all when running in slow testing mode.
Message-ID: <20231215143524.49241-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The migration stream on s390x contains data for the storage_attributes
which the analyze-migration.py cannot handle yet. Add the basic code
for handling this, so we can re-enable the check in the migration-test.
Message-ID: <20231120113951.162090-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Type names should not contain special characters like ":" (so that
they are easier to use with QAPI and other parts). We are going to
forbid such names in an upcoming patch. Thus let's replace the ":"
here with a "-".
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231117114457.177308-5-thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I missed this when going through the recent failure logs. I can run
the test 30 times without failure locally but it seems to hang pretty
reliably on GitLab's CI infra-structure.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231201201027.2689404-1-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These variables "ret" are never referenced in the code, thus
add check logic for the "ret"
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231121080802.4500-1-zhujun2@cmss.chinamobile.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use 'unsupported_configs' and 'tested_configs' here
instead of non-inclusive words.
Message-ID: <20231122084000.809696-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- gdbstub, properly halt when QEMU is having IO issues
- convert skipIf(GITLAB_CI) to skipUnless(QEMU_TEST_FLAKY_TESTS)
- tag sbsa-ref tests as TCG only
- build the correct microblaze for avocado-system-ubuntu
- add optional flaky tests job to CI
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVqHFgACgkQ+9DbCVqe
KkQHLwgAjP2iL5LSa3FaMUoESJQqRB0rpoJ80gtEtmvmgRF0fHsRfHtDdMN9h2Ed
YilCDhMKLyr2ZoK4atyuc5SR6vCXI5RAvfTddex0xSxlvBX5Z5+1FMC6yA8SDJM7
ezEXACEKHiGv+l8gvOZOf9ZYEgh8DMJYFMbrtxuxKWw/kAjZ3R3X/ChCL94ZCPRe
486wqPIQfp5EPs2ddsW4DYFTjLpK5ImX+u/5kdaEGXwcg8UoLmQ9BVIrN/hYJ6u5
t/mAp1qVIQwSOSUBnerQ4ZkVQfCgLtEtiDtt8EZjUbQD3DcLjfHFjTwVlpqcC1zs
wHXYpLbD5jkthqav5E0DObCF9gIZdA==
=qtvU
-----END PGP SIGNATURE-----
Merge tag 'pull-more-8.2-fixes-011223-2' of https://gitlab.com/stsquad/qemu into staging
Flaky avocado tests, gdbstub and gitlab tweaks
- gdbstub, properly halt when QEMU is having IO issues
- convert skipIf(GITLAB_CI) to skipUnless(QEMU_TEST_FLAKY_TESTS)
- tag sbsa-ref tests as TCG only
- build the correct microblaze for avocado-system-ubuntu
- add optional flaky tests job to CI
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVqHFgACgkQ+9DbCVqe
# KkQHLwgAjP2iL5LSa3FaMUoESJQqRB0rpoJ80gtEtmvmgRF0fHsRfHtDdMN9h2Ed
# YilCDhMKLyr2ZoK4atyuc5SR6vCXI5RAvfTddex0xSxlvBX5Z5+1FMC6yA8SDJM7
# ezEXACEKHiGv+l8gvOZOf9ZYEgh8DMJYFMbrtxuxKWw/kAjZ3R3X/ChCL94ZCPRe
# 486wqPIQfp5EPs2ddsW4DYFTjLpK5ImX+u/5kdaEGXwcg8UoLmQ9BVIrN/hYJ6u5
# t/mAp1qVIQwSOSUBnerQ4ZkVQfCgLtEtiDtt8EZjUbQD3DcLjfHFjTwVlpqcC1zs
# wHXYpLbD5jkthqav5E0DObCF9gIZdA==
# =qtvU
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Dec 2023 12:48:08 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-more-8.2-fixes-011223-2' of https://gitlab.com/stsquad/qemu:
gitlab: add optional job to run flaky avocado tests
gitlab: build the correct microblaze target
tests/avocado: tag sbsa tests as tcg only
docs/devel: rationalise unstable gitlab tests under FLAKY_TESTS
gdbstub: use a better signal when we halt for IO reasons
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of whether there are any actual changes to
the tables or not. This creates lot of new files for various test variants that
are not part of the git repository. This is because we do not check in all table
blobs for all test variants into the repository. Only those blobs for those
variants that are different from the generic test-variant agnostic blob are
checked in.
This change makes the test smarter by checking if at all there are any changes
in the tables from the checked-in gold master blobs and take actions
accordingly.
When there are no changes:
- No new table blobs would be written.
- Existing table blobs will be refreshed (git diff will show no changes).
When there are changes:
- New table blob files will be dumped.
- Existing table blobs will be refreshed (git diff will show that the files
changed, asl diff will show the actual changes).
When new tables are introduced:
- Zero byte empty file blobs for new tables as instructed in the header of
bios-tables-test.c will be regenerated to actual table blobs.
This would make analyzing changes to tables less confusing and there would
be no need to clean useless untracked files when there are no table changes.
CC: peter.maydell@linaro.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231107044952.5461-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
One problem with flaky tests is they often only fail under CI
conditions which makes it hard to debug. We add an optional allow_fail
job so developers can trigger the only the flaky tests in the CI
environment if they are debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-8-alex.bennee@linaro.org>
As firmware runs at a higher privilege level than the hypervisor we
can only run these tests under TCG emulation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-6-alex.bennee@linaro.org>
It doesn't make sense to have two classes of flaky tests. While it may
take the constrained environment of CI to trigger failures easily it
doesn't mean they don't occasionally happen on developer machines. As
CI is the gating factor to passing there is no point developers
running the tests locally anyway unless they are trying to fix things.
While we are at it update the language in the docs to discourage the
QEMU_TEST_FLAKY_TESTS becoming a permanent solution.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231201093633.2551497-3-alex.bennee@linaro.org>
netdev test keeps failing sometimes.
I don't think we should increase the timeout some more:
let's try something else instead, testing how busy the
system is.
Seems to work for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the text description file is larger than DESC_SIZE, we force the last
byte in the buffer to be 0 and write it out.
This results in a corruption.
Try to allocate a big buffer in this case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1923
Signed-off-by: Fam Zheng <fam@euphon.net>
Message-ID: <20231124115654.3239137-1-fam@euphon.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The machine type is being detected based on "-M help" output, and we're
searching for the line ending with " (default)". However, in downstream
one of the machine types s marked as deprecated might become the
default, in which case this logic breaks as the line would now end with
" (default) (deprecated)". To fix potential issues here, let's relax
that requirement and detect the mere presence of " (default)" line
instead.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20231122121538.32903-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit edac4d8a16 back in 2015 when we added support for
the virtual timer offset CNTVOFF_EL2, we didn't correctly update
the timer-recalculation code that figures out when the timer
interrupt is next going to change state. We got it wrong in
two ways:
* for the 0->1 transition, we didn't notice that gt->cval + offset
can overflow a uint64_t
* for the 1->0 transition, we didn't notice that the transition
might now happen before the count rolls over, if offset > count
In the former case, we end up trying to set the next interrupt
for a time in the past, which results in QEMU hanging as the
timer fires continuously.
In the latter case, we would fail to update the interrupt
status when we are supposed to.
Fix the calculations in both cases.
The test case is Alex Bennée's from the bug report, and tests
the 0->1 transition overflow case.
Fixes: edac4d8a16 ("target-arm: Add CNTVOFF_EL2")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Upgrade libvirt-ci so it covers macOS 14. Add a manual entry
(QEMU_JOB_OPTIONAL: 1) to test on Sonoma release. Refresh the
lci-tool generated files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231109160504.93677-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the content of $mkvenv_flags (which is either "--online"
or empty) down to tests/Makefile.include.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The reason the ppc64 and s390x test where failing was because gdb
hides them although they are still accessible via regnum. We can
re-arrange the test a little bit and include these two arches in our
test.
We also need to be a bit more careful handling remote-registers as the
format isn't easily parsed with pure white space separation. Once we
fold types like "long long" and "long double" into a single word we
can now assert all registers are either listed or elided.
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <qemu-s390x@nongnu.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: <qemu-ppc@nongnu.org>
Cc: Luis Machado <luis.machado@arm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231121153606.542101-1-alex.bennee@linaro.org>
This still remains a MANUAL test due to blocking issues.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-13-alex.bennee@linaro.org>
To make it easier to test 32 bit Arm softmmu issues implement a basic
boot.S so we can build the multiarch tests. Currently CHECK_UNALIGNED
is disabled as I haven't got the right magic set for it to work.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-12-alex.bennee@linaro.org>
Prepare for expanding the arm system tests by cleaning up the test
directory.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-11-alex.bennee@linaro.org>
We need to ensure we squash the serial port if we want to hand craft
our muxed input. As a bonus emit the example with a V=1 build to make
it easier for people to figure out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-7-alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1972
Cross compile gcc is more picky about argument order than msys. Changed
the meson command to take the (now renamed) libqemu_plugin_api.a as a
lib, rather than an object. This puts it in the right place on both
native and cross compile gcc commands
Reenable plugins on crossbuilds
Signed-off-by: Greg Manning <gmanning@rapitasystems.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231109124326.21106-2-gmanning@rapitasystems.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-5-alex.bennee@linaro.org>
debian-native isn't really needed and suffers from the problem of
tracking a distros dependencies rather than the projects. With a
little surgery we can make the debian-amd64 container architecture
neutral and allow people to use it to build a native QEMU.
Rename it so it follows the same non-arch pattern of the other distro
containers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-4-alex.bennee@linaro.org>
macOS 14 "Sonoma" was released on September 2023 [1].
According to QEMU's support policy, we stop supporting the
previous major release two years after the the new major
release has been published. Replace the macOS 12 (Monterey)
testing by macOS 13 (Ventura, released on October 2022, [2]).
Refresh the generated files by running:
$ make lcitool-refresh
[1] https://www.apple.com/newsroom/2023/09/macos-sonoma-is-available-today/
[2] https://www.apple.com/newsroom/2022/10/macos-ventura-is-now-available/
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20231108162022.76189-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-3-alex.bennee@linaro.org>
Fedora is gradually killing off i386 packages in its repos, via a
death-by-1000-cuts process. Thus Debian looks like a better long
term bet for i686 build testing. It has the added advantage that
we can generate it via lcitool too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231107164109.1449014-1-berrange@redhat.com>
[AJB: tweak commit msg, set correct prefix]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-2-alex.bennee@linaro.org>
This reverts commit c4d74ab24a.
The reverse debugging test is sometimes still failing. See:
https://gitlab.com/qemu-project/qemu/-/issues/1992
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121100842.677363-1-thuth@redhat.com>
This tests two parallel stream jobs that will complete around the same
time and run on two different disks in the same iothreads. It is loosely
based on the bug report at https://issues.redhat.com/browse/RHEL-1761.
For me, this test hangs reliably with the originally reported bug in
blk_remove_bs(). After fixing it, it intermittently hangs for the bugs
fixed after it, missing AioContext unlocking in bdrv_graph_wrunlock()
and in stream_prepare(). The deadlocks seem to happen more frequently
when the test directory is on tmpfs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-5-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_graph_wrunlock() calls aio_poll(), which may run callbacks that
have a nested event loop. Nested event loops can depend on other
iothreads making progress, so in order to allow them to make progress it
must not hold the AioContext lock of another thread while calling
aio_poll().
This introduces a @bs parameter to bdrv_graph_wrunlock() whose
AioContext is temporarily dropped (which matches bdrv_graph_wrlock()),
and a bdrv_graph_wrunlock_ctx() that can be used if the BlockDriverState
doesn't necessarily exist any more when unlocking.
This also requires a change to bdrv_schedule_unref(), which was relying
on the incorrectly taken lock. It needs to take the lock itself now.
While this is a separate bug, it can't be fixed a separate patch because
otherwise the intermediate state would either deadlock or try to release
a lock that we don't even hold.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: Fixed up bdrv_schedule_unref()]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch below fixes a bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2
macros in target/ppc/fpu_helper.c where a non-NaN floating point value from the
source vector is incorrectly converted to 0, 0x80000000, or 0x8000000000000000
instead of the expected value if a preceding source floating point value from
the same source vector was a NaN.
The bug in the VSX_CVT_FP_TO_INT and VSX_CVT_FP_TO_INT2 macros in
target/ppc/fpu_helper.c was introduced with commit c3f24257e3.
This patch also adds a new vsx_f2i_nan test in tests/tcg/ppc64 that checks that
the VSX xvcvspsxws, xvcvspuxws, xvcvspsxds, xvcvspuxds, xvcvdpsxws, xvcvdpuxws,
xvcvdpsxds, and xvcvdpuxds instructions correctly convert non-NaN floating point
values to integer values if the source vector contains NaN floating point values.
Fixes: c3f24257e3 ("target/ppc: Clear fpstatus flags on helpers missing it")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1941
Signed-off-by: John Platts <john_platts@hotmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Like replay_linux.py, reverse_debugging.py starts the vm with console
set but does not interact with it (e.g., with wait_for_console_pattern).
In this situation, the console should have a drainer attached so the
socket does not fill. replay_linux.py has a drainer, but it is missing
from reverse_debugging.py.
Per analysis in Link: this can cause the console socket/pipe to fill and
QEMU get stuck in qemu_chr_write_buffer, leading to strange test case
failures (ppc64 fails because it prints a lot to console in early bios).
Attaching a drainer prevents this.
Note, this commit does not fix bugs introduced by the commits referenced
in the first two Fixes: tags, but together those commits conspire to
irritate the problem and cause test case failure, which this commit
fixes.
Link: https://lore.kernel.org/qemu-devel/ZVT-bY9YOr69QTPX@redhat.com/
Fixes: 1d4796cd00 ("python/machine: use socketpair() for console connections")
Fixes: 761a13b239 ("tests/avocado: ppc64 reverse debugging tests for pseries and powernv")
Fixes: be52eca309 ("tests/acceptance: add reverse debugging test")
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20231116115354.228678-1-npiggin@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <20231116061956.14676-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's failing very often, so don't run this by default anymore
until it gets fixed.
Message-ID: <20231114153019.295131-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In a perfect world we'd have reproducible tests,
but then we'd be sure we run the same binaries.
If a binary artifact isn't hashed, we have no idea
what we are running. Therefore enforce hashing for
all our artifacts.
With this change, unhashed artifacts produce:
$ avocado run tests/avocado/multiprocess.py
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
ERROR: QemuBaseTest.fetch_asset() missing 1 required positional argument: 'asset_hash' (0.19 s)
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20231115205149.90765-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The multiprocess test is currently succeeding with an annoying warning:
(1/2) tests/avocado/multiprocess.py:Multiprocess.test_multiprocess_x86_64:
WARN: Test passed but there were warnings during execution. Check
the log for details
In the log, you can find an entry like:
WARNI| No hash provided. Cannot check the asset file integrity.
Add the proper asset hashes to avoid those warnings.
Message-ID: <20231115145852.494052-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The intel_iommu test is currently succeeding with annoying warnings.
Add the proper asset hashes to avoid those.
Message-ID: <20231114143531.291820-1-thuth@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "edid" feature has been added to vhost-user-gpu in commit
c06444261e ("contrib/vhost-user-gpu: implement get_edid feature"),
so waiting for "features: +virgl -edid" in the test does not work
anymore, it's "+edid" instead of "-edid" now!
While we're at it, move the expected string to the preceeding
exec_command_and_wait_for_pattern() instead (since waiting for
empty string here does not make too much sense).
Message-ID: <20231114203456.319093-1-thuth@redhat.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertRegexpMatches() has been removed in Python 3.12 and should be replaced by
assertRegex(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114144832.71612-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <20231114134326.287242-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes: 631c872614 "tests/qtest: Introduce tests for UFS"
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qdict.txt only consists of more or less random test data. We
can simply drop the lines with the problematic words here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Python 3.12 now warns about backslashes in strings that aren't used
for escaping a special character from Python. Silence the warning
by using raw strings here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231113140721.46903-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Sunil V L