On some architectures, qemu doesn't support vmcoreinfo device,
and dump-guest-memory fails:
(gdb) dump-guest-memory /tmp/vmcore ppc64-le
guest RAM blocks:
target_start target_end host_addr message count
---------------- ---------------- ---------------- ------- -----
0000000000000000 0000000200000000 00003ffd86980000 added 1
0000200080000000 0000200080800000 00003ffd86170000 added 2
Python Exception <class 'gdb.error'> No symbol "vmcoreinfo_realize" in current context.:
Error occurred in Python command: No symbol "vmcoreinfo_realize" in current context.
Check that vmcoreinfo_realize symbol exists before evaluating an
expression with it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
200 currently fails on tmpfs because it sets cache=none. However,
without that (and aio=native), the test still works now and it fails
before Jeff's series (on fc7dbc119e). So
we can probably remove the aio=native safely, and replace cache=none by
cache=$CACHEMODE.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180117135015.15051-1-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This patch prevents a possible segmentation fault when .desc members are checked
against NULL.
The ssh_runtime_opts was added by commit
8a6a80896d ("block/ssh: Use QemuOpts for runtime
options").
This fix was inspired by
http://lists.nongnu.org/archive/html/qemu-devel/2018-01/msg00883.html.
Fixes: 8a6a80896d ("block/ssh: Use QemuOpts for runtime options")
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
We masked the wrong bits, which prevented some of the
32-bit R registers. E.g. "fcnvxf,sgl,sgl fr22R,fr6R".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have the prerequisites in target/hppa/,
implement the hardware for a PA7100LC.
This also enables build for hppa-softmmu.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Since it is all new code, squashed all branch development
withing hw/hppa/ to a single patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is an extension to the base ISA, but we can use this in
the kernel idle loop to reduce the host cpu time consumed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
HP-UX 10.20 CD contains "add r0, r0, r27" in a delay slot,
which uses at least 5 temps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unknown why this works, but if we return EXCP_ITLB_MISS we
will triple-fault the first userland instruction fetch.
Is it something to do with having a combined I/DTLB?
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linux sets sr4-sr7 all to the same value, which means that we
need not do any runtime computation to find out what space to
use in forming the GVA.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Real hardware would use an external device to control the power.
But for the moment let's invent instructions in reserved space,
to be used by our custom firmware.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
However since HPPA has a software-managed TLB, and the relevant
TLB manipulation instructions are not implemented, this does not
actually do anything.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Any one TB will have only one space value. If we change spaces,
we change TBs. Thus BE and BEV must exit the TB immediately.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These instructions force the destination privilege level
of the branch destination to be no higher than current.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This changes the system virtual address width to 64-bit and
incorporates the space registers into load/store operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the E bit is only used for pa2.0 mfctl,w from sar,
the otherwise reserved bit does not appear to be decoded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most aspects of privilege are not yet handled. But this
gives us the start from which to begin checking.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For system mode, we will need 64-bit virtual addresses even when
we have 32-bit register sizes. Since the rest of QEMU equates
TARGET_LONG_BITS with the address size, redefine everything
related to register size in terms of a new TARGET_REGISTER_BITS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't actually do anything with most of the bits yet,
but at least they have names and we have somewhere to
store them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the addition of default-configs/hppa-softmmu.mak, this
will compile. It is not enabled with this patch, however.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJab54VAAoJEHWtZYAqC0IRZ+IH+QFtVX3R9fVxlSmFtPs7L9+s
a+WbbVbYf0toiTg1taRoYgyGkryc8Gtw8VJrN2iowM8KFjEx+h2cZ3qoRd15GqP6
jFAGb0lc6tjOk0O5pDiJU8hErSrIda8biBp/I0QDz3RkXeGrAZ7FrQemj0FXQjEG
0o+xGstCYKrVfGxrnDysfvyGSDOad0HnBqwc0rerbVjBJe5p8UErP8DSPsNCaj6W
qbSSgySeMnTeXGOwIXgCW43eTEJG13eBQ/rNJRqrcoIXiBd/txPb+c+E1iBBAmrF
XZHxS4v8vP+8rVRgBut4sIr2psx1DZvktHRThJDgu+Cyv6h7c6okQ0wxmo0+9bo=
=k7Fh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-01-26-2' into staging
Merge tpm 2018/01/26 v2
# gpg: Signature made Mon 29 Jan 2018 22:20:05 GMT
# gpg: using RSA key 0x75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-01-26-2:
tpm: add CRB device
tpm: report backend request error
tpm: replace GThreadPool with AIO threadpool
tpm: lookup cancel path under tpm device class
tpm: fix alignment issues
tpm: Set the flags of the CMD_INIT command to 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell