Per the below code, it can overflow as am can be larger than 8 according
to the CH 6.5.2.3 IOTLB Invalidate. Use uint64_t to avoid overflows.
Fixes: b5a280c008 ("intel-iommu: add IOTLB using hash table")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-4-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These 2 macros are for high 64-bit of the FRCD registers.
Declarations have to be moved accordingly.
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The constant must be unsigned, otherwise the two's complement
overrides the other fields when a PASID is present.
Fixes: 1b2b12376c ("intel-iommu: PASID support")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-Id: <20240709142557.317271-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When setting the parameters of a PCM stream, we compute the bit flag
with the format and rate values as shift operand to check if they are
set in supported_formats and supported_rates.
If the guest provides a format/rate value which when shifting 1 results
in a value bigger than the number of bits in
supported_formats/supported_rates, we must report an error.
Previously, this ended up triggering the not reached assertions later
when converting to internal QEMU values.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2416
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2416-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When reading input audio in the virtio-snd input callback,
virtio_snd_pcm_in_cb(), we do not check whether the iov can actually fit
the data buffer. This is because we use the buffer->size field as a
total-so-far accumulator instead of byte-size-left like in TX buffers.
This triggers an out of bounds write if the size of the virtio queue
element is equal to virtio_snd_pcm_status, which makes the available
space for audio data zero. This commit adds a check for reaching the
maximum buffer size before attempting any writes.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2427
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2427-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240708032112.796339-1-yi.l.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement transfer and activate functionality per 3.1 spec for
supporting update metadata (no actual buffers). Transfer times
are arbitrarily set to ten and two seconds for full and part
transfers, respectively.
cxl update-firmware mem0 -F fw.img
<on-going fw update>
cxl update-firmware mem0
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"fw_update_in_progress":true,
"remaining_size":22400
}
}
<completed fw update>
cxl update-firmware mem0
{
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"staged_slot":2,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"slot_2_version":"BWFW VERSION 1",
"fw_update_in_progress":false
}
}
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240627164912.25630-1-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705125915.991672-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.
The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-3-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
Get Supported Features retrieves the list of supported device specific
features. The settings of a feature can be retrieved using Get Feature and
optionally modified using Set Feature.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-2-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Preparation for allowing devices to define their own CCI commands
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20230906001517.324380-2-gregory.price@memverge.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Iterate over the list keeping the output payload size into account,
returning the results from a previous scan media operation. The
scan media operation does not fail prematurely due to device being
out of storage, so this implementation does not deal with the
retry/restart functionality.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-5-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h), the
sanitize command should delete all event logs. Introduce
cxl_discard_all_event_logs() and call
this in __do_sanitization().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20231222090051.3265307-5-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spec states that reads/writes should have no effect and a part of
commands should be ignored when the media is disabled, not when the
sanitize command is running.
Introduce cxl_dev_media_disabled() to check if the media is disabled and
replace sanitize_running() with it.
Make sure that the media has been correctly disabled during sanitation
by adding an assert to __toggle_media(). Now, enabling when already
enabled or vice versa results in an assert() failure.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/r/20231222090051.3265307-4-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use simple heuristics to determine the cost of scanning any given
chunk, assuming cost is equal across the whole device, without
differentiating between volatile or persistent partitions. This
is aligned to the fact that these constraints are not enforced
in respective poison query commands.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-3-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes (Segmentation fault) when getting cxl-fmw property via
qmp:
(QEMU) qom-get path=machine property=cxl-fmw
This issue is caused by accessing wrong callback (opaque) type in
machine_get_cfmw().
cxl_machine_init() sets the callback as `CXLState *` type but
machine_get_cfmw() treats the callback as
`CXLFixedMemoryWindowOptionsList **`.
Fix this error by casting opaque to `CXLState *` type in
machine_get_cfmw().
Fixes: 03b39fcf64 ("hw/cxl: Make the CXL fixed memory window setup a machine parameter.")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Link: https://lore.kernel.org/r/20240704093404.1848132-1-zhao1.liu@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar protection to that provided for -numa memdev=x
to make sure that memory used to back a type3 device is not also mapped
as normal RAM, or for multiple type3 devices.
This is an easy footgun to remove and seems multiple people have
run into it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I have recently been working on supporting vhost-user on any POSIX,
so I want to help maintain it.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240704081336.21208-1-sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, if the function fails during the key_len check, the op_code
does not have a proper value, causing virtio_crypto_free_create_session_req
not to free the memory correctly, leading to a memory leak.
By setting the op_code before performing any checks, we ensure that
virtio_crypto_free_create_session_req has the correct context to
perform cleanup operations properly, thus preventing memory leaks.
ASAN log:
==3055068==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 512 byte(s) in 1 object(s) allocated from:
#0 0x5586a75e6ddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7fb6b63b6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x5586a864bbde in virtio_crypto_handle_ctrl hw/virtio/virtio-crypto.c:407:19
#3 0x5586a94fc84c in virtio_queue_notify_vq hw/virtio/virtio.c:2277:9
#4 0x5586a94fc0a2 in virtio_queue_host_notifier_read hw/virtio/virtio.c:3641:9
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-Id: <20240702211835.3064505-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
And firmware required to set the offset of pool buffer
by writing "Function Control Register(I2CD 00)"
To make this model more readable, will change to introduce
a new bus pool buffer attribute in AspeedI2Cbus.
So, it does not need to calculate the pool buffer offset
for different I2C bus.
This patch rename the I2C class pool attribute to share_pool.
It make user more understand share pool and bus pool
are different.
Incrementing the version of aspeed_i2c_vmstate to 3.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
an I2C controller owns 8KB of register space for AST2700,
owns 4KB of register space for AST2600, AST2500 and AST2400,
and owns 64KB of register space for AST1030.
It set the memory region size 4KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the I2C controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Add ADC model for AST2700 ADC support.
The ADC controller registers base address is start at
0x14C0_0000 and its address space is 0x1000.
The ADC controller interrupt is connected to
GICINT130_INTC group at bit 16. The GIC IRQ is 130.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 and AST2600 ADC controllers are identical.
Introduce ast2700 class and set 2 engines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The default behavior of some Aspeed machines is to boot from the eMMC
device, like the rainier-bmc. Others like ast2600-evb could also boot
from eMMC if the HW strapping boot-from-eMMC bit was set. Add a
property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc
machines for which eMMC images are available or can be built.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To change default behavior of a machine and boot from eMMC, future
changes will add a machine option to let the user configure the
boot-from-eMMC HW strapping bit. Add a new machine attribute first.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This value is taken from a running Rainier machine.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config'
property to set the boot config register to boot from the first boot
area partition of the eMMC device. Also set the boot partition size
of the device.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping
bit is set at the board level. AST2700 also has support but it is not
yet ready in QEMU and others SoCs do not have support, so return false
always for these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images
specially built for this purpose.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The first boot area partition (64K) of the eMMC device should contain
an initial boot loader (u-boot SPL). Load it as a ROM only if an eMMC
device is available to boot from but no flash device is.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The QEMU device model representing the eMMC device of the machine is
currently created with type SD_CARD. Change the type to EMMC now that
it is available.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity reports a possible integer overflow because routine
aspeeed_smc_hclk_divisor() has a codepath returning 0, which could
lead to an integer overflow when computing variable 'hclk_shift' in
the caller aspeed_smc_dma_calibration().
The value passed to aspeed_smc_hclk_divisor() is always between 0 and
15 and, in this case, there is always a matching hclk divisor. Remove
the return 0 and use g_assert_not_reached() instead.
Fixes: Coverity CID 1547822
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
While the `allow-rpcs` option is documented in the CLI options
section, it was missing in the section about the configuration file
syntax.
And while it's mentioned that "the list of keys follows the command line
options", having `block-rpcs` there but not `allow-rpcs` seems like
being a potential source of confusion; and as it's cheap to add let's
just do so.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240718140407.444160-1-t.lamprecht@proxmox.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Make ga_wait_child() return boolean and check the returned boolean
in ga_run_command() instead of dereferencing @errp.
Cc: Michael Roth <michael.roth@amd.com>
Cc: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240716162351.270095-1-zhao1.liu@intel.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
It is confusing having many different pieces of code enabling and
disabling commands, and it is not clear that they all have the same
semantics, especially wrt prioritization of the block/allow lists.
The code attempted to prevent the user from setting both the block
and allow lists concurrently, however, the logic was flawed as it
checked settings in the configuration file separately from the
command line arguments. Thus it was possible to set a block list
in the config file and an allow list via a command line argument.
The --dump-conf option also creates a configuration file with both
keys present, even if unset, which means it is creating a config
that cannot actually be loaded again.
Centralizing the code in a single method "ga_apply_command_filters"
will provide a strong guarantee of consistency and clarify the
intended behaviour. With this there is no compelling technical
reason to prevent concurrent setting of both the allow and block
lists, so this flawed restriction is removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240712132459.3974109-23-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Allowing the user to set the QGA_CONF environment variable to change
the default configuration file path is very unusual practice, made
more obscure since this ability is not documented.
This introduces the more normal '-c PATH' / '--config=PATH' command
line argument approach. This requires that we parse the comamnd line
twice, since we want the command line arguments to take priority over
the configuration file settings in general.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240712132459.3974109-22-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
This variable was used to support back compat for the old config
file key name, and became redundant after the following change:
commit a7a2d636ae
Author: Philippe Mathieu-Daudé <philmd@linaro.org>
Date: Thu May 30 08:36:43 2024 +0200
qga: Remove deprecated 'blacklist' argument / config key
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-21-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
It is referenced by QGAState already, and it is clearer to declare all
data types at the top of the file, rather than have them mixed with
code later.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-20-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The fsfreeze commands are already written to report an error if
vss_init() fails. Reporting a more specific error message is more
helpful than a generic "command is disabled" message, which cannot
between an admin config decision and lack of platform support.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240712132459.3974109-19-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on other UNIX.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-18-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the get-users command on POSIX
platforms lacking required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-17-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the schema to fully
exclude generation of the filesystem trimming commands on POSIX
platforms lacking required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-16-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the filesystem trimming commands
on POSIX platforms lacking required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-15-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the schema to fully
exclude generation of the filesystem freezing commands on POSIX
platforms lacking the required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-14-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on non-Windows.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-13-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Some commands were blocked based on CONFIG_FSFREEZE, but their
impl had nothing todo with CONFIG_FSFREEZE, and were instead
either Linux-only, or Win+Linux-only.
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the stats and fsinfo commands on
platforms that can't support them.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-12-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Rather than creating stubs for every comamnd that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the network interface command on
POSIX platforms lacking getifaddrs().
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-11-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Clément Mathieu--Drif