# By Michael Tokarev (2) and others
# Via Michael Tokarev
* mjt/trivial-patches:
doc: monitor multiplexing rewording
block/m25p80: Update Micron entries
Fix command example in qemu.sasl
slirp: remove mbuf(m_hdr,m_dat) indirection
linux-user: declare sys_futex to have 6 arguments
Message-id: 1374225073-12959-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Peter Lieven (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block/raw: add .bdrv_get_info
block: fix bdrv_read_unthrottled()
cpus: Let vm_stop[_force_state]() always flush block devices
block-migration: efficiently encode zero blocks
block/raw: add bdrv_co_write_zeroes
block: add bdrv_write_zeroes()
block: fix vvfat error path for enable_write_target
QEMUBH: make AioContext's bh re-entrant
dataplane: sync virtio.c and vring.c virtqueue state
gluster: Add discard support for GlusterFS block driver.
gluster: Use pkg-config to configure GlusterFS block driver
Message-id: 1374223132-29107-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Richard Henderson
# Via Richard Henderson
* rth/axp-next:
pc-bios: Update palcode-clipper
target-alpha: Move alarm to vm_clock
Message-id: 1374161033-11449-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Markus Armbruster
# Via Stefan Hajnoczi
* stefanha/tracing:
trace-events: Fix up source file comments
trace-events: Drop unused events
milkymist-minimac2: Fix minimac2_read/_write tracepoints
slavio_misc: Fix slavio_led_mem_readw/_writew tracepoints
cleanup-trace-events.pl: New
Message-id: 1374119369-26496-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The load_ramdisk function is used to load ramdisk featuring a U-Boot
header.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-3-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce 'load_ramdisk()' which can load "normal" ramdisks and ramdisks
with a u-boot header.
To enable this and leverage synergies 'load_uimage()' is refactored to
accomodate this additional use case.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-2-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some virtio-mmio transports to the vexpress board model,
together with a modify_dtb hook which adds them to the device
tree so that the kernel will probe for them. We put them
in a reserved area of the address map.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-9-git-send-email-peter.maydell@linaro.org
Make the VEDBoardInfo struct extend arm_boot_info; this will
allow us to get at the VEDBoardInfo information inside callbacks
from arm/boot code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-8-git-send-email-peter.maydell@linaro.org
Add a callback hook in arm_boot_info to allow board models to
modify the device tree blob if they need to. (The major expected
use case is to add virtio-mmio nodes for virtio-mmio transports
that exist in QEMU but not in the hardware.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org
Add support for the generic MMIO based virtio transport.
This patch includes some fixes for bugs spotted by
Ying-Shiuan Pan <yspan@itri.org.tw>.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1373977512-28932-6-git-send-email-peter.maydell@linaro.org
[Fred changes: updated to new virtio-bus mechanisms]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[PMM changes:
* fixed trivial makefile conflict
* removed unused int_enable
* host_features doesn't need migrating
* reset guest accessible state in the reset function
* minor style fixes like extra blank lines
* RAZ/WI if there's no backend
* made transport size 0x200, in line with kvmtool
* set has_variable_vring_alignment
]
Support virtio transports which can specify the vring alignment
(ie where the guest communicates this to the host) by providing
a new virtio_queue_set_align() function. (The default alignment
remains as before.)
Transports which wish to make use of this must set the
has_variable_vring_alignment field in their VirtioBusClass
struct to true; they can then change the alignment via
virtio_queue_set_align().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-5-git-send-email-peter.maydell@linaro.org
The MMIO virtio transport spec allows the guest to tell the host how
large the queue size is. Add virtio_queue_set_num() function which
implements this in the QEMU common virtio support code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-4-git-send-email-peter.maydell@linaro.org
Replace the opencoded assembly of the reg property array for the
/memory node with a call to qemu_devtree_setprop_sized_cells().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1373977512-28932-3-git-send-email-peter.maydell@linaro.org
- Split 32Mb and 256Mb parts into a11 and a13 variants.
- Add the 4K sector flag to the 128Mb parts. (These entries were taken from
the Linux kernel list, which is missing the flag.)
- Fill out the table of sizes with entries for 64Mb parts.
Prodded by Peter Crosthwaite.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Load the virtio.c state into vring.c when we start dataplane mode and
vice versa when stopping dataplane mode. This patch makes it possible
to start and stop dataplane any time while the guest is running.
This will eventually allow us to go back to QEMU main loop for
bdrv_drain_all() and live migration. In the meantime, this patch makes
the dataplane lifecycle more robust but should make no visible
difference. It may be useful in the virtio-net dataplane effort.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Basing the alarm off the rtc_clock was silly. It leads to horrible
spinning in the guest after being suspended and resumed, as it tries
to catch up with lost ticks.
This requires adding an accessor for reading the vm_clock too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
=P+pr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pc: don't access fw cfg if NULL
virtio-net: add feature bit for any header s/g
net: add support of mac-programming over macvtap in QEMU side
pci: fix BRDIGE typo
pci-bridge: update mappings for migration/restore
Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Broken in milkymist-minimac.c from the start (commit 0742454),
faithfully moved to milkymist-minimac2.c (commit 57aa265).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Broken since they got added in commit 97bf485.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add support for error containment when a VFIO device assigned to a KVM
guest encounters an error. This is for PCIe devices/drivers that support AER
functionality. When the host OS is notified of an error in a device either
through the firmware first approach or through an interrupt handled by the AER
root port driver, the error handler registered by the vfio-pci driver gets
invoked. The qemu process is signaled through an eventfd registered per
VFIO device by the qemu process. In the eventfd handler, qemu decides on
what action to take. In this implementation, guest is brought down to
contain the error.
The kernel patches for the above functionality has been already accepted.
This is a refresh of the QEMU patch which was reviewed earlier.
http://marc.info/?l=linux-kernel&m=136281557608087&w=2
This patch has the same contents and has been built after refreshing
to latest upstream and after the linux headers have been updated in qemu.
- Create eventfd per vfio device assigned to a guest and register an
event handler
- This fd is passed to the vfio_pci driver through the SET_IRQ ioctl
- When the device encounters an error, the eventfd is signalled
and the qemu eventfd handler gets invoked.
- In the handler decide what action to take. Current action taken
is to stop the guest.
Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Turns out all the suspicions for AMD devices were correct, everywhere
we read a BAR address that the address matches the config space offset,
there's full access to PCI config space. Attempt to generalize some
helpers to allow quirks to easily be added for mirrors and windows.
Also fill in complete config space for AMD.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABCAAGBQJR5BsIAAoJEDwlJe0UNgzemaIP/1XIep/THEP6D3X96uJ21u3y
8aVGlkkZMwPSmLm9kN6EuU8C4dwxRIVI/0QewUySdsQApiWUdes+ypeMdckgnyzi
j/DxiGpFlqs3U4y778ELHGv7//8Mmfy1vkBY35q3tFS8+DXIwe78Dryvd+uhFb4W
X2m0rKME145RQBiG59/P2aEYj3VTJbyjRPye0U97k7LuP3I4uW4HFxM5H6pJce8O
/Mb4Llqtigx+MZPrI4oFrZMpHIVmn6o4VHK3TpF0vpXZGng9x5qrB9VgPwDV2O1P
eW/RKVZFZgL91y8xSZUS1jQKzqQfJz9CjdNp+md+t14X4bRbaAZC5nNQPM7lT7nM
xroOgEWeISRKekulhpNxE9lVI1mRo9BBPLQR1MsdQMEqMZrnGVmJaaUHAclbJVec
YIdP2QZ+Q2WLgiz+nKlGnvQxlNEJA+0g1fGL0VHbG1J1eo6MmCbAvq/IEklH0b0y
a0yj7yAdvmdco7Xp6bC/lPtnyS5hoFYXu3aLrCsfR/NL93P7FAP9DlL7P3hlGOMB
mHqchMP8IDtp/fquH0AAO0D0Uh6imXR6rGDwm8yo0vud2032pIcEYNhD+J+ot7DA
I/zL9l5r8FAg0mhzKblIWM7itV5+TXZDJ/T3ThzlhalzhNCrby/SAfmnQ/hpj+sM
ctqNJZLG7aay+HPCStPk
=c35i
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-arm-devs-20130715' into staging
arm-devs queue
# gpg: Signature made Mon 15 Jul 2013 10:53:44 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Maydell (4) and others
# Via Peter Maydell
* pmaydell/tags/pull-arm-devs-20130715:
ARM/highbank: add support for Calxeda ECX-2000 / Midway
ARM/highbank: prepare for adding similar machines
hw/arm/vexpress: Add alias for flash at address 0 on A15 board
hw/dma/omap_dma: Fix bugs with DMA requests above 32
sd/pl181.c: Avoid undefined shift behaviour in RWORD macro
hw/cpu/a15mpcore: Correct default value for num-irq
char/cadence_uart: Fix reset for unattached instances
Message-id: 1373904095-27592-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Richard Henderson
# Via Richard Henderson
* rth/axp-next:
hw/alpha: Use SRM epoch
hw/alpha: Drop latch_tmp hack
exec: Support 64-bit operations in address_space_rw
hw/alpha: Don't machine check on missing pci i/o
hw/alpha: Don't use get_system_io
Message-id: 1373840171-25556-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit f8c457b88d
"pc: pass PCI hole ranges to Guests"
broke Xen as it has no fw_cfg.
Check for this configuration and boil out.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.
Design:
QEMU notifies Libvirt when rx-filter config is changed in guest,
then Libvirt query the rx-filter information by a monitor command,
and sync the change to macvtap device. Related rx-filter config
of the nic contains main mac, rx-mode items and vlan table.
This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.
Test:
If we repeatedly add/remove vlan, and change macaddr of vlan
interfaces in guest by a loop script.
Result:
The events will flood the QMP client(management), management takes
too much resource to process the events.
Event_throttle API (set rate to 1 ms) can avoid the events to flood
QMP client, but it could cause an unexpected delay (~1ms), guests
guests normally expect rx-filter updates immediately.
So we use a flag for each nic to avoid events flooding, the event
is emitted once until the query command is executed. The flag
implementation could not introduce unexpected delay.
There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.
Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
"additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Calxeda ECX-2000 chip (aka. Midway) is model-wise quite similar
to the Highbank. The most prominent difference is the Cortex-A15 CPU
core in it, together with the associated core peripherals.
Add a new ARM machine type called "midway".
Move the L2 cache controller device into the Highbank specific part,
since Midway does not have (and need) it.
Signed-off-by: Andre Przywara <andre.przywara@calxeda.com>
Message-id: 1373026897-12085-3-git-send-email-andre.przywara@calxeda.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To allow the modelling of machines similar to Calxeda Highbank,
introduce a parameter to the init function and call it from a
wrapper. This allows to tweak the definition for individual machines
later on.
Signed-off-by: Andre Przywara <andre.przywara@calxeda.com>
Message-id: 1373026897-12085-2-git-send-email-andre.przywara@calxeda.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A15 Versatile Express board can remap a variety of things at address
0. We don't currently emulate the Serial Configuration Controller which
is how the guest can control this remapping, but we can provide the
initial default mapping of the first flash device into this space.
In particular this allows QEMU to boot flash images such as UEFI which
expect to include an exception vector table.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Grant Likely <grant.likely@linaro.org>
Message-id: 1373374180-19884-1-git-send-email-peter.maydell@linaro.org
The drqbmp field of struct soc_dma_s is a uint64_t; however several
places in the code attempt to set bits in it using "(1 << drq)",
which will fail if drq is large enough that the 1 bit gets shifted
off the top of a 32 bit integer. Change these to "(1ULL << drq)" so
that the promotion to 64 bit happens before the shift rather than
afterwards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372423919-5669-1-git-send-email-peter.maydell@linaro.org
Add a cast to avoid potentially shifting into the sign bit of
a signed value, which is undefined behaviour in C.
(Detected with clang's -fsanitize=undefined.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372341831-4264-1-git-send-email-peter.maydell@linaro.org
The a15mpcore device claims that its default value for num-irq
is the number of interrupts used by the A15MP in the vexpress-a15
board. However that chip has 128 external interrupts, not 64.
Since there is only one A15 based model in QEMU currently, we
can fix this by simply changing the default value.
This error was causing recent (3.10) Linux kernels to print
warnings/backtraces when the number of interrupts reported
by the GIC was smaller than an interrupt number they wanted
to use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373032481-15280-1-git-send-email-peter.maydell@linaro.org
commit 1db8b5efe0 introduced an issue
where QEMU would segfault if you have an unattached Cadence UART.
Fix by guarding the flush-on-reset logic on there being a qemu_chr
attachment.
Reported-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Message-id: 9009578ee10a50d994b2e10aa2840d73765f5968.1370577272.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AHCI couldn't cope with asynchronous commands that aren't doing DMA, it
simply wouldn't complete them. Due to the bug fixed in commit f68ec837,
FLUSH commands would seem to have completed immediately even if they
were still running on the host. After the commit, they would simply hang
and never unset the BSY bit, rendering AHCI unusable on any OS sending
flushes.
This patch adds another callback for the completion of asynchronous
commands. This is what AHCI really wants to use for its command
completion logic rather than an DMA completion callback.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The 1980 epoch is used by the ARC PALcode for NT. But we're emulating
a system using the SRM PALcode. Using the proper epoch results in less
confusion in the guest userland.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The memory and i/o core now support passing 64-bit accesses along
from the guest, so we no longer need to emulate them.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Not really correct, but we don't implement all of the random devices
that the kernel looks for. This is good enough to keep us booting.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Advancements in the ioport subsystem mean that we need no longer
thunk memory-mapped i/o through the system-io address space.
Signed-off-by: Richard Henderson <rth@twiddle.net>
A DMA request can happen for data that hasn't been completely been
provided by the IDE core yet. For example
- DBDMA request for 0x1000 bytes
- IDE request for 1 sector
- DBDMA wants to read 0x1000 bytes (8 sectors) from bdrv
- breakage
Instead, we should truncate our bdrv request to the maximum number
of sectors we're allowed to read at that given time. Once that transfer
is through, we will fall into our recently introduced waiting logic.
- DBDMA requests for 0x1000 bytes
- IDE request for 1 sector
- DBDMA wants to read MIN(0x1000, 1 * 512) bytes
- DBDMA finishes reading, indicates to IDE core that transfer is complete
- IDE request for 7 sectors
- DBDMA finishes the DMA
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X accesses fancy timer registers inside of the mac-io on bootup.
These really should be ticking at the mac-io bus frequency, but I don't
see anyone upset when we just make them as fast as we want to.
With this patch on top of my previous patch queue and latest OpenBIOS
I am able to boot Mac OS X 10.4 with -M mac99.
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA engine really just reads bytes from a producing device (IDE
in our case) and shoves these bytes into memory. It doesn't care whether
any alignment takes place or not.
Our code today however assumes that block accesses always happen on
sector (512 byte) boundaries. This is a fair assumption for most cases.
However, Mac OS X really likes to do unaligned, incomplete accesses
that it finishes with the next DMA request.
So we need to read / write the unaligned bits independent of the actual
asynchronous request, because that one can only handle 512-byte-aligned
data. We also need to cache these unaligned sectors until the next DMA
request, at which point the data might be successfully flushed from the
pipe.
Signed-off-by: Alexander Graf <agraf@suse.de>
We should only start processing DMA requests when we have data to process.
Hold off working through the DMA shuffling until the IDE core told us that
it's ready.
This is required because the guest can program the DMA engine or the IDE
transfer first. Both are legal.
Signed-off-by: Alexander Graf <agraf@suse.de>
Soon we will introduce intermediate processing pauses which will
allow the bottom half to restart a DMA request that couldn't be
fulfilled yet.
For that to work, move the processing variable into the io struct
which is what DMA providers work with.
While touching it, also change it into a bool
Signed-off-by: Alexander Graf <agraf@suse.de>
We need to know when the IDE core starts a DMA transfer. Add a notifier
function so we have the chance to start transmitting data.
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA controller has a bottom half to asynchronously process DMA
request queues.
This bh was stored as a gross static variable. Move it into the device
struct instead.
While at it, move all users of it to the new generic kick function.
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA engine really is running all the time, waiting for input. However
we don't want to waste cycles constantly polling.
So introduce a kick function that data providers can call to notify the
DBDMA controller of new input.
Signed-off-by: Alexander Graf <agraf@suse.de>
We usually keep struct and constant definitions in header files. Move
them there to stay consistent and to make access to fields easier.
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA controller can not change its command stream while it's
actively streaming data, true. But the fact that it's in RUN state
doesn't actually indicate anything. It could just as well be in
WAIT while in RUN. And then it's legal to change commands.
This fixes a real world issue I've encountered with Mac OS X.
Signed-off-by: Alexander Graf <agraf@suse.de>
There was a debug print that didn't compile for me because the format
and the arguments weren't in sync. Fix it up.
Signed-off-by: Alexander Graf <agraf@suse.de>
The macio code is basically undebuggable as it stands today, with no
debug prints anywhere whatsoever. DBDMA was better, but I needed a
few more to create reasonable logs that tell me where breakage is.
Add a DPRINTF macro in the macio source file and add a bunch of debug
prints that are all disabled by default of course.
Signed-off-by: Alexander Graf <agraf@suse.de>
On a real G3 Beige the secondary IDE bus lives on the mac-io chip, not
on some random PCI device. Move it there to become more compatible.
While at it, also clean up the IDE channel connection logic.
Signed-off-by: Alexander Graf <agraf@suse.de>
We can tell the guest the frequency of its time base through fwcfg.
However, we tell it a different value from the speed tb actually runs
at. Let's fix it and make the tbfreq initialization and the fwcfg exposure
use the same values.
Signed-off-by: Alexander Graf <agraf@suse.de>
Allow the user to override the firmware file name rather than always
using "slof.bin".
Reported-by: Dinar Valeev <k0da@opensuse.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The function returned a target_ulong which was made from unnamed enum
values. The target_ulong was then assigned to an int variable which
was used in a switch statement.
Using a named enum in both cases makes reviews easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
i686-w64-mingw32-gcc (GCC) 4.6.3 from Debian wheezy reports these warnings:
hw/ppc/spapr_hcall.c:188:1: warning:
control reaches end of non-void function [-Wreturn-type]
hw/ppc/spapr_pci.c:454:1: warning:
control reaches end of non-void function [-Wreturn-type]
Both warnings are fixed by using g_assert_not_reached instead of assert.
A second line with assert(0) in spapr_pci.c which did not raise a compiler
warning was modified, too, because g_assert_not_reached documents the
purpose of that statement and is not removed in release builds.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix for LP#1187529: Devices on PCI bridge stop working when
live-migrated. Update bridge mappings for all PCI bridge
devices in get_pci_config_device().
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since current_cpu is CPUState it no longer depends on CPUPPCState.
Move ppce500_set_mpic_proxy() to a new hw/ppc/ppc_e500.h because
hw/ppc/ppc.h is too heavily using CPUPPCState and PowerPCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The previous two commits fixed bugs in -machine option queries. I
can't find fault with the remaining queries, but let's use
qemu_get_machine_opts() everywhere, for consistency, simplicity and
robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
microblaze_load_kernel() fails to call
qemu_find_file(QEMU_FILE_TYPE_BIOS, dtb_filename) when no -machine
options are given. This can't normally happen, because -machine
option kernel is mandatory for this target. Fix it anyway, by using
qemu_get_machine_opts().
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Multiple -machine options with the same ID are merged. All but the
one without an ID are to be silently ignored.
In most places, we query these options with a null ID. This is
correct.
In some places, we instead query whatever options come first in the
list. This is wrong. When the -machine processed first happens to
have an ID, options are taken from that ID, and the ones specified
without ID are silently ignored.
Example:
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: disabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
USB support not enabled
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
xen be core: can't open xen interface
failed to initialize Xen: Operation not permitted
Option usb is queried correctly, and the one without an ID wins,
regardless of option order.
Option accel is queried incorrectly, and which one wins depends on
option order and ID.
Affected options are accel (and its sugared forms -enable-kvm and
-no-kvm), kernel_irqchip, kvm_shadow_mem.
Additionally, option kernel_irqchip is normally on by default, except
it's off when no -machine options are given. Bug can't bite, because
kernel_irqchip is used only when KVM is enabled, KVM is off by
default, and enabling always creates -machine options. Downstreams
that enable KVM by default do get bitten, though.
Use qemu_get_machine_opts() to fix these bugs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix few more memory leaks in virtio-9p-device.c detected using valgrind.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Message-id: 1372929678-14341-1-git-send-email-mohan@in.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Previous realization doesn't consider flags in the status register.
Add DS and INTR bits of HST_STS register set after transaction execution.
Update bits resetting in HST_STS register. Update error processing:
if DEV_ERR bit set transaction isn't execution.
Signed-off-by: MRatnikov <m.o.ratnikov@gmail.com>
Message-id: 1373230982-9190-1-git-send-email-m.o.ratnikov@gmail.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
=gxxc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,misc enhancements
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: Fold host_buses list into PCIHostState functionality
pci: Remove domain from PCIHostBus
pci: Simpler implementation of primary PCI bus
pci: Add root bus parameter to pci_nic_init()
pci: Add root bus argument to pci_get_bus_devfn()
pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci: Use helper to find device's root bus in pci_find_domain()
pci: Abolish pci_find_root_bus()
pci: Move pci_read_devaddr to pci-hotplug-old.c
pci: Cleanup configuration for pci-hotplug.c
pvpanic: fix fwcfg for big endian hosts
pvpanic: initialization cleanup
MAINTAINERS: s/Marcelo/Paolo/
e1000: cleanup process_tx_desc
pc_piix: cleanup init compat handling
pc: pass PCI hole ranges to Guests
pci: store PCI hole ranges in guestinfo structure
range: add Range structure
Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The host_buses list is an odd structure - a list of pointers to PCI root
buses existing in parallel to the normal qdev tree structure. This patch
removes it, instead putting the link pointers into the PCIHostState
structure, which have a 1:1 relationship to PCIHostBus structures anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are now no users of the domain field of PCIHostBus, so remove it
from the structure, and as a parameter from the pci_host_bus_register()
function which sets it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently pci_find_primary_bus() searches the list of root buses for one
with domain 0. But since host buses are always registered with domain 0,
this just amounts to finding the only PCI host bus. The only remaining
users of pci_find_primary_bus() are in pci-hotplug-old.c, which implements
the old style pci_add/pci_del commands.
Therefore, this patch redefines pci_find_primary_bus() to find the only
PCI root bus, returning an error if there are multiple roots. The callers
in pci-hotplug-old.c are updated correspondingly, to produce sensible
error messages.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root. As we add support for
multiple PCI roots, that may no longer be the case. This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters. NICs created new-style, with
-device can of course be put anywhere.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_get_bus_devfn() interprets a full PCI address string to give a PCIBus *
and device/function number within that bus. Currently it assumes it is
working on an address under the primary PCI root bus. This patch extends
it to allow the caller to specify a root bus. This might seem a little odd
since the supplied address can (theoretically) include a PCI domain number.
However, attempting to use a non-zero domain number there is currently an
error, so that shouldn't really cause problems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_domain() is used in a number of places where we want an id for a
whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is
that many platforms may support multiple independent host bridges with no
hardware supplied notion of domain number.
This patch, therefore, replaces calls to pci_find_domain() with calls to
a new pci_root_bus_path() returning a string. The new call is implemented
in terms of a new callback in the host bridge class, so it can be defined
in some way that's well defined for the platform. When no callback is
available we fall back on the qbus name.
Most current uses of pci_find_domain() are for error or informational
messages, so the change in identifiers should be harmless. The exception
is pci_get_dev_path(), whose results form part of migration streams. To
maintain compatibility with old migration streams, the PIIX PCI host is
altered to always supply "0000" for this path, which matches the old domain
number (since the code didn't actually support domains other than 0).
For the pseries (spapr) PCI bridge we use a different platform-unique
identifier (pseries machines can routinely have dozens of PCI host
bridges). Theoretically that breaks migration streams, but given that we
don't yet have migration support for pseries, it doesn't matter.
Any other machines that have working migration support including PCI
devices will need to be updated to maintain migration stream compatibility.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently pci_find_domain() performs two functions - it locates the PCI
root bus above the given bus, then looks up that root bus's domain number.
This patch adds a helper function to perform the first task, finding the
root bus for a given PCI device. This is then used in pci_find_domain().
This changes pci_find_domain()'s signature slightly, taking a PCIDevice
instead of a PCIBus - since all callers passed something of the form
dev->bus, this simplifies things slightly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_root_bus() takes a domain parameter. Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus. Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_find_primary_bus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Paolo Bonzini (50) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony: (66 commits)
exec: change some APIs to take AddressSpaceDispatch
exec: remove cur_map
exec: put memory map in AddressSpaceDispatch
exec: separate current radix tree from the one being built
exec: move listener from AddressSpaceDispatch to AddressSpace
memory: move MemoryListener declaration earlier
exec: separate current memory map from the one being built
exec: change well-known physical sections to macros
qom: Use atomics for object refcounting
memory: add reference counting to FlatView
memory: use a new FlatView pointer on every topology update
memory: access FlatView from a local variable
add a header file for atomic operations
hw/[u-x]*: pass owner to memory_region_init* functions
hw/t*: pass owner to memory_region_init* functions
hw/s*: pass owner to memory_region_init* functions
hw/p*: pass owner to memory_region_init* functions
hw/n*: pass owner to memory_region_init* functions
hw/m*: pass owner to memory_region_init* functions
hw/i*: pass owner to memory_region_init* functions
...
Message-id: 1372950842-32422-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're already using them in several places, but __sync builtins are just
too ugly to type, and do not provide seqcst load/store operations.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are using the same struct name for two devices. 8250 is widespread
enough that this causes some confusion, rename the other instance.
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ref/unref calls at the following places:
- places where memory regions are stashed by a listener and
used outside the BQL (including in Xen or KVM).
- memory_region_find callsites
- creation of aliases and containers (only the aliased/contained
region gets a reference to avoid loops)
- around calls to del_subregion/add_subregion, where the region
could disappear after the first call
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new API will avoid having too many memory_region_ref/unref
in paths that currently use memory_region_find.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the latter may vanish one day, make sure the vmport read handler
type will remain unaffected. This is also conceptually cleaner.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before switching to the memory core dispatcher, we need to make sure
that this pv-device will continue to receive unaligned portio accesses.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before switching to the memory core dispatcher, we need to make sure
that this pv-device will continue to receive unaligned portio accesses.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Open-code isa_is_ioport_assigned via a memory region lookup. As all IO
ports are now directly or indirectly registered via the memory API, this
becomes possible and will finally allow us to drop the ioport tables.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert over to memory regions to obsolete register_ioport*.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert over to memory regions to obsolete register_ioport*.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert over to memory regions to obsolete register_ioport*.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert over to memory regions to obsolete register_ioport*.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert over to memory regions to obsolete register_ioport*.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert over to memory regions to obsolete register_ioport*.
CC: malc <av1474@comtv.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pci_read_devaddr() is only used by the legacy functions for the old PCI
hotplug interface in pci-hotplug-old.c. So we move the function there,
and make it static.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed. They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface. This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.
CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too. In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.
Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid use of static variables: PC systems
initialize pvpanic device through pvpanic_init,
so we can simply create the fw_cfg file at that point.
This also makes it possible to skip device
creation completely if fw_cfg is not there, e.g. for xen -
so the ports it reserves are not discoverable by guests.
Also, make pvpanic_init void since callers ignore return
status anyway.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity complains about two overruns in process_tx_desc(). The
complaints are false positives, but we might as well eliminate
them. The problem is that "hdr" is defined as an unsigned int,
but then used to offset an array of size 65536, and another of
size 256 bytes. hdr will actually never be greater than 255
though, as it's assigned only once and to the value of
tp->hdr_len, which is an uint8_t. This patch simply gets rid of
hdr, replacing it with tp->hdr_len, which makes it consistent
with all other tp member use in the function.
v2:
- also cleanup coding style issues in the touched lines
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure 1.4 calls 1.5, 1.3 calls 1.4 etc.
This way it's enough to add enough new compat hook
in a single place in piix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Guest currently has to jump through lots of hoops to guess the PCI hole
ranges. It's fragile, and makes us change BIOS each time we add a new
chipset. Let's report the window in a ROM file, to make BIOS do exactly
what QEMU intends.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
kvmclock should not count while vm is paused, because:
1) if the vm is paused for long periods, timekeeping
math can overflow while converting the (large) clocksource
delta to nanoseconds.
2) Users rely on CLOCK_MONOTONIC to count run time, that is,
time which OS has been in a runnable state (see CLOCK_BOOTTIME).
Change kvmclock driver so as to save clock value when vm transitions
from runnable to stopped state, and to restore clock value from stopped
to runnable transition.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While DEBUG() already includes the function name.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Alexander Graf (12) and others
# Via Alexander Graf
* agraf/ppc-for-upstream: (32 commits)
PPC: Ignore writes to L2CR
mac-io: Add escc-legacy memory alias region
PPC: Newworld: Add second uninorth control register set
PPC: Newworld: Add uninorth token register
PPC: Add clock-frequency export for Mac machines
PPC: Introduce an alias cache for faster lookups
PPC: Fix GDB read on code area for PPC6xx
PPC: Add dump_mmu() for 6xx
target-ppc: Introduce unrealizefn for PowerPCCPU
booke_ppc: limit booke timer to max when timeout overflow
Graphics: Switch to 800x600x32 as default mode
pseries: Update MAINTAINERS information
target-ppc kvm: save cr register
pseries: Fix compiler warning (conversion of pointer to integral value)
spapr-rtas: add CPU argument to RTAS calls
target-ppc: Change default machine for 64-bit
ppc: do not register IABR SPR twice for 603e
target-ppc: Drop redundant flags assignments from CPU families
mpc8544_guts: Turn qdev initfn into instance_init
mpc8544_guts: QOM'ify
...
Message-id: 1372556709-23868-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
event_notifier_get_fd() is not available on windows hosts. Fix this by
moving the calls to event_notifier_get_fd() to the kvm code.
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Mac OS X's debugging serial driver accesses the ESCC through a different
register layout, called "escc-legacy". This layout differs from the normal
escc register layout purely by the location of the respective registers.
This patch adds a memory alias region that takes normal escc registers and
maps them into the escc-legacy register space.
With this patch applied, a Mac OS X guest successfully emits debug output
on the serial port when run with debug parameters set, for example by running:
$ qemu-system-ppc -prom-env -'boot-args=-v debug=0x8 io=0xff serial=0x3' \
-cdrom 10.4.iso -boot d
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X requires a second uninorth register set to be mapped a few
bytes above the first one. Let's just expose it to make it happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Mac OS X expects the uninorth control register set to contain one
register that always reads back what it writes in. Expose that.
This is just a temporary hack. Eventually, we want to expose the
uninorth (/uni-n in device tree) as a separate QOM device.
Signed-off-by: Alexander Graf <agraf@suse.de>
Support in fwcfg has been around for exposure of the clock-frequency
CPU property. OpenBIOS reads it, we just never exposed it.
Since Mac OS X is very picky about its clock frequency values, let's
just take a known good value and always expose that.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
Limit watchdog and fit timer to maximum timeout value which
qemu timer can support (INT64_MAX). This maximum timeout will be
hundreds of years, so limiting to max timeout is pretty safe.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This kind of type cast must use uintptr_t or target_ulong to be portable
for hosts with sizeof(void *) != sizeof(long).
Here the value is assigned to a variable of type target_ulong.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
RTAS is a hypervisor provided binary blob that a guest loads and
calls into to execute certain functions. It's similar to the
vsyscall page in Linux or the short lived VMCI paravirt interface
from VMware.
The QEMU implementation of the RTAS blob is simply a passthrough
that proxies all RTAS calls to the hypervisor via an hypercall.
While we pass a CPU argument for hypercall handling in QEMU, we
don't pass it for RTAS calls. Since some RTAs calls require
making hypercalls (normally RTAS is implemented as guest code) we
have nasty hacks to allow that.
Add a CPU argument to RTAS call handling so we can more easily
invoke hypercalls just as guest code would.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, for qemu-system-ppc64, the default machine type is 'mac99'.
The mac99 machine is not being actively maintained, and represents a
bizarre hybrid of components that never actually existed as a real system.
This patch changes the default machine to 'pseries', which is actively
maintained and works well with most modern ppc64 Linux distributions as a
guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: adjust commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
SysBus can deal with NULL SysBusDeviceClass::init since 4ce5dae.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant, cast macro and rename parent field.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Split qdev initfn into instance_init and realize functions.
Change one occurrence of "klass" while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant and cast macro.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).
Note from Alex regarding kvm_irqchip_create():
On x86, one would call kvm_irqchip_create() to initialize an
in-kernel interrupt controller. That function then goes ahead and
initializes global capability variables as well as the default irq
routing table.
On ppc, we can't call kvm_irqchip_create() because we can have
different types of interrupt controllers. So we want to do all the
things that function would do for us in the in-kernel device init
handler.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
The current logic updates KVM's view of our interrupt map every time we
change it. While this is nice and bullet proof, it slows things down
badly for me. QEMU spends about 3 seconds on every start telling KVM what
news it has on its routing maps.
Instead, let's just synchronize the whole irq routing map as a whole when
we're done constructing it. For things that change during runtime, we can
still update the routing table on demand.
Signed-off-by: Alexander Graf <agraf@suse.de>
KVM in-kernel MPIC support is going to expand this even more,
so let's keep it contained.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The upper_mem field of the Multiboot information struct doesn't really
contain the RAM size - 1 MB like we used to calculate it, but only the
memory from 1 MB up to the first (upper) memory hole.
In order to correctly retrieve this information, the multiboot ROM now
looks at the mmap it creates anyway and tries to find the size of
contiguous usable memory from 1 MB.
Drop the multiboot.c definition of lower_mem and upper_mem because both
are queried at runtime now.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1372018066-21822-3-git-send-email-mail@kevin-wolf.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make sure we use the correct TARGET/PRI macros in the debug statements.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use it for all targets, but be careful not to pass invalid CPUState.
cpu_single_env can be NULL, e.g. on Xen.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer relies on CPUArchState since 20d695a.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Peter Crosthwaite (3) and others
# Via Peter Maydell
* pmaydell/arm-devs.for-upstream:
nand: Don't inherit from Sysbus
block/nand: Convert Sysbus::init to Device::realize
block/nand: QOM casting sweep
i.MX31: Fix PRCS bit test
arm/boot: Free dtb blob memory after use
i.MX: Rework functions/types name and use new style initialization
i.MX: Implement a more complete version of the GPT timer.
ARM: Allow dumping of device tree
Message-id: 1372184516-32397-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Cornelia Huck (2) and Christian Borntraeger (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wire up guest and host notifies.
virtio-ccw: Wire up ioeventfd.
s390/virtio-ccw: Fix virtio reset
Message-id: 1372177538-9812-1-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Nand chips are not sysbus devices - they do not have any sense of MMIO,
nor interrupts. Re-parent to TYPE_DEVICE accordingly.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The prescribed transition from Sysbus::init function to a
Device::realize.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cppcheck detected a condition which was always false.
According to the MCIMX31 Reference Manual, the PRCS bits have to be 01
to select the Frequency Pre-Multiplier (FPM). PRCS uses bits 1 and 2,
so we have to test for 2.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Message-id: 1370810662-32320-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dtb blob returned by load_device_tree() is in memory allocated
with g_malloc(). Free it accordingly once we have copied its
contents into the guest memory. To make this easy, we need also to
clean up the error handling in load_dtb() so that we consistently
handle errors in the same way (by printing a message and then
returning -1, rather than either plowing on or exiting immediately).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371209256-11408-1-git-send-email-peter.maydell@linaro.org
* use dynamic cast whenever possible
* Change function names to some more meaningful prefix
* Change type names to a more meaningful one
* use new style device initialization
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1369898943-1993-3-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By calling qemu_devtree_dumpdtb near the end of load_dtb.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guest and host notifiers are needed by vhost. We use ioeventfds for
the guest notifiers, but need to fall back on qemu injecting interrupts
for the host notifiers.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On hosts that support ioeventfd, make use of it for host-to-guest
notifications via diagnose 500.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On virtio reset we must reset the indicator to avoid stale interrupts,
e.g. after a reset.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Creation of the xen-platform device is currently hardcoded into machine
type pc's initialization code, guarded by a test for the whether the xen
accelerator is enabled. This patch moves the creation of xen-platform into
the initialization code of the xenfv machine type. This maintains backwards
compatibility for that machine type but allows more flexibility if another
machine type is used with Xen HVM domains.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Xen HVM domains normally spawn QEMU with a dedicated xenfv machine type. The
initialization code for this machine type can easily be pulled into the
generic pc initialization code and guarded with a test for whether the xen
accelerator options is specified, which is more consistent with the way
other accelerators are used.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This reverts commit 9f24a8030a.
The start of the PCI hole is actually set to 0xf0000000 by hvmloader.
In order to retain ABI compatibility with Xen we leave the start of the
PCI hole at 0xf0000000 in QEMU (for Xen) too.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
# By Kevin Wolf (22) and Fam Zheng (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
vmdk: refuse to open higher version than supported
block: Always enable discard on the protocol level
qcow2: Batch discards
qcow2: Options to enable discard for freed clusters
qcow2: Add refcount update reason to all callers
Revert "block: Disable driver-specific options for 1.5"
ide: Clean up ide_exec_cmd()
ide: Convert SMART commands to ide_cmd_table handler
ide: Convert CF-ATA commands to ide_cmd_table handler
ide: Convert ATAPI commands to ide_cmd_table handler
ide: Convert SEEK to ide_cmd_table handler
ide: Convert FLUSH CACHE to ide_cmd_table handler
ide: Convert SET FEATURES to ide_cmd_table handler
ide: Convert CHECK POWER MDOE to ide_cmd_table handler
ide: Convert READ NATIVE MAX ADDRESS to ide_cmd_table handler
ide: Convert DMA read/write commands to ide_cmd_table handler
ide: Convert PIO read/write commands to ide_cmd_table handler
ide: Convert read/write multiple commands to ide_cmd_table handler
ide: Convert verify commands to ide_cmd_table handler
ide: Convert cmd_nop commands to ide_cmd_table handler
...
Message-id: 1372065035-19601-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Andreas Färber (3) and others
# Via Gerd Hoffmann
* kraxel/usb.84:
usb: fix serial number for hid devices
usb: add serial bus property
usb-host-libusb: set USB_DEV_FLAG_IS_HOST
usb/host-libusb: Fix building with libusb git master code
usb/hcd-ehci: Add Faraday FUSBH200 support
usb/hcd-ehci: Replace PORTSC macros with variables
usb/hcd-ehci: Add Tegra2 SysBus EHCI device
usb/hcd-ehci: Split off instance_init from realize
usb/hcd-ehci-sysbus: Convert to QOM realize
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
configure: Add signed*signed check to [u]int128_t test
Makefile: pass include directives to dtc via CPPFLAGS, not CFLAGS
qapi: lack of two commas in dict
sd: pass bool parameter for sd_init
qemu-char: use bool in qemu_chr_open_socket and simplify code a bit
vnc: use booleans for vnc_connect, vnc_listen_read and vnc_display_add_client
block/nand: Formatting sweep
qxl: Fix QXLRam initialisation.
acl: acl_add can't insert before last list element, fix
configure: Fix "ERROR: ERROR: " for missing/incompatible DTC
audio: Replace static functions in header file by macros, remove GCC_ATTR
libcacard: Fix cppcheck warning and remove unneeded code
savevm: Fix potential memory leak
kvm: Fix potential resource leak (missing fclose)
qemu-img: Add missing GCC_FMT_ATTR
qemu-options: trivial fix for -mon args help
vl: reformat SDL ifdeffery a bit
Message-id: 1371893076-9643-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All commands are now converted to ide_cmd_table handlers, so it can be
unconditional now and the old switch block can go.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cmd_nop handles all commands that don't really do anything in our
implementation except setting status register flags.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As a preparation for moving all IDE commands into their own function
like in the ATAPI code, introduce a 'handler' callback to ide_cmd_table.
Commands using this new infrastructure get some things handled
automatically:
* The BSY flag is set before calling the handler (in order to avoid bugs
like the one fixed in f68ec837) and reset on completion.
* The (obsolete) DSC flag in the status register is set on completion if
the command is flagged with SET_DSC in the command table
* An IRQ is triggered on completion.
* The error register and the ERR flag in the status register are cleared
before calling the handler and on completion it is asserted that
either none or both of them are set.
No commands are converted at this point.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 7b074a22da changed the serial
number of hid devices. Add compat properties to keep the old serial
number for qemu 0.12 and older.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a serial property for all usb devices, which can be
used to set the serial number of a usb device (as listed by lsusb -v)
to a specific value. Applies to emulated devices only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next libusb release will deprecate libusb_get_port_path, and since
we compile with -Werror, this breaks the build.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add Faraday FUSBH200 support, which is slightly different from EHCI spec.
(Or maybe simply a bad/wrong implementation...)
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace PORTSC macros with variables which could then be
configured in ehci_xxxx_class_init(...)
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This prepares an EHCI device for the Nvidia Tegra2 SoC family.
Values based on patch by Vincent Palatin and verified against TRM v01p.
Cc: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes the mem MemoryRegion available to derived instance_inits.
Keep the bus in realize for now since naming breaks in instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The SysBus qdev initfn merely calls SysBusDeviceClass::init, so we can
replace it with a realizefn already. This avoids getting into any initfn
ambiguity with the upcoming Faraday EHCI implementation.
Rename internal usb_ehci_initfn() to usb_ehci_realize() to allow to
return Errors from common initialization code as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make this code closer to passing checkpatch. Mostly missing braces, but
a few rogue tabs in there as well.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The qxl driver expect NULL for QXLRam.memory_configs, but this is never
initialized.
If memory is set to 0xc2c2.., it leads to a spice-critical error when
trying to start qxl.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "info mtree" command in QEMU console prints only "memory" and "I/O"
address spaces while there are actually a lot more other AddressSpace
structs created by PCI and VIO devices. Those devices do not normally
have names and therefore not present in "info mtree" output.
The patch fixes this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fetch the root region from the sPAPRTCETable, and use it to build
an AddressSpace and DMAContext.
Now, everywhere we have a DMAContext we also have access to the
corresponding AddressSpace (either because we create it just before
the DMAContext, or because dma_context_memory's AddressSpace is
trivially address_space_memory).
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new iommu support in the memory core for iommu support. The only
user, spapr, is also converted, but it still provides a DMAContext
interface until the non-PCI bits switch to AddressSpace.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Do not calls memory_region_del_subregion() on the device's
bus_master_enable_region, it is an alias; return an AddressSpace
from the IOMMU hook and remove the destructor hook. - David Gibson ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The translate function in the DMAContext is now always NULL.
Remove every reference to it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we can stop using a "translating" DMAContext, but we do not yet modify
the sPAPRTCETable users to get an AddressSpace; they keep using the table
via a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next step is to introduce the translation code that will be used for
IOMMU MemoryRegions, but still do the actual translation in a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TCE table is currently returned as a DMAContext, and non-type-safe
APIs are called later passing back the DMAContext. Since we want to move
away from DMAContext, use an opaque type instead, and add an accessor
to retrieve the DMAContext from it.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vfio doesn't support guest iommus yet, indicate it to the user
by gently depositing a core on their disk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes
An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Option -no-fd-bootchk asks the BIOS to attempt booting from a floppy
even when the boot sector signature isn't there, by setting a bit in
RTC CMOS. It was added back in 2006 (commit 52ca8d6a).
Two years later, commit 0ecdffbb added monitor command boot_set.
Implemented by new function pc_boot_set(). It unconditionally clears
the floppy signature bit in CMOS.
Commit e0f084bf added -boot option once to automatically change the
boot order on first reset. Reuses pc_boot_set(), thus also clears the
floppy signature bit. Commit d9346e81 took care to preserve this
behavior.
Thus, -no-fd-bootchk applies to any number of boots. Except it
applies just to the first boot with -boot once, and never after
boot_set. Weird. Make it stick instead: set the bit according to
-no-fd-bootchk in pc_boot_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When this VMSD was introduced it's version fields were set to
sizeof(I6300State), making them essentially random from build to build,
version to version.
To fix this, we lock in a high version id and low minimum version id to
support old->new migration from all prior versions of this device's
state. This should work since the device state has not changed since
its introduction.
The potentially breaks migration from 1.5+ to 1.5, but since the
versioning was essentially random prior to this patch, new->old
migration was not consistently functional to begin with.
Reported-by: Nicholas Thomas <nick@bytemark.co.uk>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
iscsi: reorganize iscsi_readcapacity_sync
iscsi: simplify freeing of tasks
vhost-scsi: fix k->set_guest_notifiers() NULL dereference
scsi-disk: scsi-block device for scsi pass-through should not be removable
scsi-generic: check the return value of bdrv_aio_ioctl in execute_command
scsi-generic: fix sign extension of READ CAPACITY(10) data
scsi: reset cdrom tray statuses on scsi_disk_reset
Message-id: 1371565016-2643-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
'default_backend' isn't always set, but 'rng' is, so use that.
$ ./x86_64-softmmu/qemu-system-x86_64 -object rng-random,id=rng0,filename=/dev/random -device virtio-rng-pci,rng=rng0
Segmentation fault (core dumped)
Regressed with virtio refactoring in 59ccd20a9a
CC: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: bf4505014a0a941dbd3c62068f3cf2c496b69e6a.1370023944.git.crobinso@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Coverity picked up a copy-paste bug. In vhost_scsi_start() we check for
!k->set_guest_notifiers and error out. The check probably got copied
but instead of erroring we actually use the function pointer!
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Asias He <asias@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new SCSI_DISK_F_NO_REMOVABLE_DEVOPS feature. By this
feature we can set that the scsi-block (scsi pass-through) device will still
be removable from the guest side, but from monitor it cannot be removed.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the bug introduced by this commit ad54ae80c7.
The bdrv_aio_ioctl() still could return null and we should return an error
in that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Issuing the READ CAPACITY(10) command in the guest will cause QEMU
to update its knowledge of the maximum accessible LBA in the disk.
The recorded maximum LBA will be wrong if the disk is bigger than
1TB, because ldl_be_p returns a signed int.
When this is fixed, a latent bug will be unmasked. If the READ
CAPACITY(10) command reported an overflow (0xFFFFFFFF), we must
not overwrite the previously-known maximum accessible LBA, or the guest
will fail to access the disk above the first 2TB.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tray statuses should be also reset. Some guests may lock the tray and
right after resetting the guest it should be unlocked and closed. This
is done on power-on, reset and resume from suspend/hibernate on bare-metal.
This fix is already committed for IDE CD.
Check the commit a7f3d65b65.
Test results on bare-metal:
- on reset/power-on the CD-ROM tray is closed even before the monitor
is turned on
- on resume from suspend/hibernate the tray is also closed before
the monitor is turned on
From test results it seems that this behavior is OS and probably BIOS
independent.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a little strange. It is lowering the parent IRQ pin on input
when HIE is cleared. There is no such behaviour in the real hardware.
ISR changes based on interrupt pin state are already guarded on HIE
being set. So we can just delete this if in its entirety.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
When the Hardware Interrupt Enable (HIE) bit is set, software cannot
change ISR. Add write guard accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Acking a level sensitive interrupt should have no effect if the
interrupt pin is still asserted. The current implementation requires
and edge condition to occur for setting a level sensitive IRQ, which
means an ACK can clear a level sensitive interrupt, until the original
source strobes the interrupt again.
Fix by keeping track of the interrupt pin state and setting ISR based
on this every time update_irq() is called.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
For level sensitive interrupts, ISR bits are cleared when the input pin
is lowered. This is incorrect. Only software can clear ISR bits (via
IAR or direct write to ISR with !MER(2)).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The UART IRQ is edge sensitive, whereas the machine was registering it
as level sensitive. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Paolo Bonzini (4) and others
# Via Peter Maydell
* pmaydell/configury.next:
ppc: Remove CONFIG_FDT conditionals
microblaze: Remove CONFIG_FDT conditionals
arm: Remove CONFIG_FDT conditionals
configure: Require libfdt for arm, ppc, microblaze softmmu targets
configure: dtc: Probe for libfdt_env.h
build: drop TARGET_TYPE
main: use TARGET_ARCH only for the target-specific #define
build: do not use TARGET_ARCH
build: rename TARGET_ARCH2 to TARGET_NAME
Add a stp file for usage from build directory
Message-id: 1371221594-11556-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Copy&paste error in serial.c causes a crash when attempting
to read from UART (if there is no data to be read)
Signed-off-by: Vladimir Senkov <hangup@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
qdev: Drop FROM_QBUS() macro
isa: QOM'ify ISADevice
isa: QOM'ify ISABus
i8259: Convert PICCommonState to use QOM realizefn
kvm/i8259: QOM'ify some more
i8259: QOM'ify some more
i8254: Convert PITCommonState to QOM realizefn
kvm/i8254: QOM'ify some more
i8254: QOM'ify some more
isa: Use realizefn for ISADevice
cs4231a: QOM'ify some more
gus: QOM'ify some more
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-4-git-send-email-peter.maydell@linaro.org
Now that we know we're compiling with libfdt, we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-3-git-send-email-peter.maydell@linaro.org
Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 96f00396338321f5a76c9b86c629b69895e4d2d0.1370496582.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ich6 and ich9 variants either need to inherit one from the other,
or both from a common base class, otherwise its not possible to create
a QOM cast macro for use by the shared implementation functions.
Went for option B, with a common base class.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 54453b6aa8afa1a76b2ec1932f1d7fd25205d0bc.1370496582.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Classic endianness bug due to careless dirty coding: assuming reading
a byte from an int variable gets the least significant byte.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Having size precede the associated pointer is odd. Swap them, and fix
up the types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Improves diagnistics from ad hoc messages like
Invalid SMBIOS UUID string
to
qemu-system-x86_64: -smbios type=1,uuid=gaga: Invalid UUID
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Michael Tokarev (4) and others
# Via Michael Tokarev
* mjt/trivial-patches-next: (26 commits)
piix: fix some printf errors when debug is enabled
cputlb: fix debug logs
create qemu_openpty_raw() helper function and move it to a separate file
main-loop: do not include slirp/slirp.h, use libslirp.h instead
libcacard/vscclient: fix leakage of socket on error paths
linux-headers: Update to v3.10-rc5
KVM: PPC: Add dummy kvm_arch_init_irq_routing()
KVM: S390: Add dummy kvm_arch_init_irq_routing()
KVM: ARM: Add dummy kvm_arch_init_irq_routing()
ivshmem: add missing error exit(2)
hw/xen: Use g_free instead of free and fix potential memory leaks
target-sparc: Replace free by g_free
hw/scsi: Don't increment a boolean value
device tree: Fix cppcheck warning
Makefile: Install qemu-img and qemu-nbd man pages only if built
Unbreak -no-quit for GTK, validate SDL options
gtk: implement -full-screen
char/serial: serial_ioport_write: Factor out common code
char/serial: Use generic Fifo8
char/serial: cosmetic fixes.
...
Message-id: 1371207042-17980-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of looping over all CPUArchState, use a helper to obtain the
desired CPUState.
Free the "cpu" variable for PowerPCCPU, to access its CPUPPCState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of looping over all CPUArchState, use a helper to obtain the
desired CPUState directly. Saves a CPUPPCState variable and QOM cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
If the user fails to specify 'chardev' or 'shm' then we cannot continue.
Exit right away so that we don't invoke shm_open(3) with a NULL pointer.
It would be nice to replace exit(1) with error returns in the PCI device
.init() function, but leave that for another patch since exit(1) is
currently used elsewhere.
Spotted by Coverity.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The wrong functions and the missing calls of g_free were reported
by cppcheck.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These three lines are common to both FIFO and regular mode. Just factor
them out to outside the if rather than replicate the same lines inside
both if and else.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use the generic Fifo8 helper provided by QEMU, rather than re-implement
privately.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some cosmetic fixes to char/serial fixing some checkpatch errors.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use qemu_set_irq rather than if-elsing qemu_irq_(lower|raise). No
functional change, just reduces verbosity.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The CPUID model values on Conroe, Penryn, and Nehalem are too
conservative and don't reflect the values found on real Conroe, Penryn,
and Nehalem CPUs.
This causes at least one known problems: Windows XP disables sysenter
when (family == 6 && model <= 2), but Skype tries to use the sysenter
instruction anyway because it is reported as available on CPUID, making
it crash.
This patch sets appropriate model values that correspond to real Conroe,
Penryn, and Nehalem CPUs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some CPU model fixes are going to be included and they will require
compatibility properties in the pc-*-1.5 machine-types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QMP command "{ 'execute': 'cpu-add', 'arguments': { 'id': -1 }}" may cause
QEMU SIGSEGV at:
piix4_cpu_hotplug_req ()
...
g->sts[cpu_id / 8] |= (1 << (cpu_id % 8));
...
Since for PC in current implementation id should be in range [0...maxcpus)
and maxcpus is already checked, add check for lower bound and error out
on incorrect value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Jason Wang (1) and Stefan Hajnoczi (1)
# Via Stefan Hajnoczi
* stefanha/net:
tap: fix NULL dereference when passing invalid parameters to tap
vmxnet3: fix NICState cleanup
Message-id: 1370613288-14933-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a stream notify function is not ready, it may re-populate the notify call-
back to indicate it should be re-polled later. This break in this usage, as
immediately following the notify() call, .notify is set to NULL. reverse the
ordering of the notify call and NULL assignment accordingly.
[PC: Reworked commit message]
Signed-off-by: Wendy Liang <jliang@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Obviously the code wanted to mask the lower bits but failed to do so
because of a missing "<".
cppcheck detected a conditional expression which was always true (1 < 7).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
# By Kevin Wolf (19) and others
# Via Stefan Hajnoczi
* stefanha/block: (26 commits)
hmp: add parameters device and -v for info block
hmp: show ImageInfo in 'info block'
qmp: add ImageInfo in BlockDeviceInfo used by query-block
block: add image info query function bdrv_query_image_info()
block: add snapshot info query function bdrv_query_snapshot_info_list()
ide-test: Add FLUSH CACHE test case
ide: Set BSY bit during FLUSH
ide-test: Add enum value for DEV
blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK events
Make qemu-io commands available in HMP
qemu-io: Use the qemu version for -V
qemu-io: Interface cleanup
qemu-io: Move remaining helpers from cmd.c
qemu-io: Move command_loop() and friends
qemu-io: Move functions for registering and running commands
qemu-io: Move qemu_strsep() to cutils.c
qemu-io: Move 'quit' function
qemu-io: Move 'help' function
qemu-io: Factor out qemuio_command
qemu-io: Split off commands to qemu-io-cmds.c
...
Message-id: 1370606325-10680-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of having the parent provide PICCommonClass::init,
let the children override DeviceClass::realize themselves.
This pushes the responsibility of saving and calling the parent's
realizefn to the children.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of having the parent provide PITCommonClass::init,
let the children override DeviceClass::realize themselves.
This pushes the responsibility for saving and calling the parent's
realizefn to the children.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The implementation of the ATA FLUSH command invokes a flush at the block
layer, which may on raw files on POSIX entail a synchronous fdatasync().
This may in some cases take so long that the SLES 11 SP1 guest driver
reports I/O errors and filesystems get corrupted or remounted read-only.
Avoid this by setting BUSY_STAT, so that the guest is made aware we are
in the middle of an operation and no ATA commands are attempted to be
processed concurrently.
Addresses BNC#637297.
Suggested-by: Gonglei (Arei) <arei.gonglei@huawei.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Interpretation of the ccws to register (configuration) indicators contained
a thinko: We want to disallow reading from 0, but setting the indicator
pointer to 0 is fine.
Let's fix the handling for CCW_CMD_SET{,_CONF}_IND.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix an off-by-one error when indicating availablity of concurrent
sense data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Use qemu_del_nic() instead of qemu_del_net_client() to correctly free
the entire NICState.
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* sstabellini/xen_fixes_20130603:
xen: use pc_init_pci instead of pc_init_pci_no_kvmclock
xen: remove xen_vcpu_init
xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)
xen_machine_pv: do not create a dummy CPU in machine->init
main_loop: do not set nonblocking if xen_enabled()
xen: simplify xen_enabled
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Stefan Hajnoczi (6) and others
# Via Kevin Wolf
* kwolf/for-anthony:
block: dump snapshot and image info to specified output
block: move qmp and info dump related code to block/qapi.c
block: move snapshot code in block.c to block/snapshot.c
block: drop bs_snapshots global variable
qemu-iotests: make create_image() common
qemu-iotests: make compare_images() common
qemu-iotests: make cancel_and_wait() common
qemu-iotests: make assert_no_active_block_jobs() common
block: add block driver read only whitelist
qemu-iotests: fix 054 cluster size help output
Message-id: 1370349940-4703-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some pci-related cleanups,
and fw cfg cleanups which will be useful for on-going
pci related work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRq6EsAAoJECgfDbjSjVRplKYIALtUF6RtKyOR6bSo1YvI203y
huzLkLP675D2cEFbjBsjJFLcQPXUbj78taePMgFwlLzKWCrV0wTuAX21Sd3m4i/p
P4BZzXd50EgRwxtpTBOu7jgboZbL/3TuVpRYDiGz5pRnWw/NBOPYbbi1Trj53nXg
lwOq8E1HZyBo7pniLkYsUuScXzmqQ5qqNDU0r5eQURKkqaIXJN6ZFlXb0N6IgWMZ
ytX5FGi22pIzQwf5oxKRrIbko1dyy+Jn5xoykEz9AbP+mt+kvTqjAkzO7cCSCmSq
DOYQT4EsGnokM2CVwdZEbjgjJ+nTrzwf7VbvMIlWOSHyPYBBMjBXXYhwsC/fuU8=
=Adz/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: misc cleanups
This includes some pci-related cleanups,
and fw cfg cleanups which will be useful for on-going
pci related work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 02 Jun 2013 02:46:52 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and Laszlo Ersek (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pvpanic: use FWCfgState explicitly
fw_cfg: fw_cfg is a singleton
fw_cfg: add API to find FW cfg object
fw_cfg: move typedef to qemu/typedefs.h
refer to FWCfgState explicitly
apic: rename apic specific bitopts
firmware_abi: move to include/hw/nvram/
dec.c - move to pci-bridge
q35: set fw_name
Message-id: 1370202787-3712-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Unify function and type naming
* use dynamic cast whenever possible
* simplify Debug printf.
* use new style device intialization.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Message-id: 1369839656-24466-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even if we do not register newly created RAM MemoryRegion for migration with
vmstate_register_ram_global() function, ram_save_setup() still saves this region
to snapshot file with empty idstr=="". Consequently this results in error during
VM loading in ram_load().
Register rom_mem for migration.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-3-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exynos SoC was misusing memory_region_init_ram_ptr(): this interface can safely
be used only for memory regions which size is a multiple of target page size.
Change chipid_and_omr memory to an mmio region to fix this.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-2-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no common code between these 2 timer implementation.
So it is better to split them.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1368990197-19694-1-git-send-email-jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU models two (of the three) ACMD41 has two modes, "inquiry" and
"first". The selection logic for which of the two is incorrect - it
compares != 0 for the entire argument value rather than only bits 23:0
as per the spec. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3ef0a7fd1b2f3ebb23b4fdeabcc14caf3fad6d71.1369622254.git.peter.crosthwaite@xilinx.com
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The end of transfer check was occurring and potentially returning before
the interrupt flag was checked. This means the interrupt will be missed
if it occurs on the last packet. Fix by checking for the interrupt
before checking for the end of transfer.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 9969ec154777957ec738fc4e539d68e7494d0081.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This message was printing out the data in decimal only, which is not
very friendly to the debugging developer. Add hex variant in
parenthesis to make it consistent with other similar messages in this
module.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: d624179649137832eaa8caa263ef9589b4395d5e.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This interrupt is not risen after the last block is written to sd. It
is mutually exclusive with the end of transfer conditions. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 7ca9fd3e03ce1bec94aff08f607c15a0ec3d3371.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The data_count variable was being reset on every transfer, including
DMA transfer resumptions. This is incorrect, it should only be set
on a new command.
Manifests as a bug when using ADMA and there is a timer delay between
ADMA frames where the fifo is left in a non empty state.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 15a98609cc32315211b0963091a8efd67522e160.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The LQSPI bus attachment supports byte/halfword and misaligned
accesses. Fixed. Refactored the LQSPI cache to be byte-wise
instead of word wise accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 5ec47b13563ad2d22105a1f26186d7756718394b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do 16 words per fifo flush. Increases performance and decreases
debug verbosity. This data depth has no real hardware analogue,
so just go with something that has reasonable performance.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 5621ee4621941d3639b5cacfdec26bd3148f31d5.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The debug printfs on every SPI operation is extremely verbose. Add
a second level of debug for this.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: f63478b8e5b29cc011cdc10e29f8537bb2fc2b5e.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is worth keeping track of when debugging the device model.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: d3b44ecf23d671798b062eee5dc362c716ea54cd.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QSPI controller was using byte-wide stripes when striping across
the two flashes in dual parallel mode. The real hardware however uses
individual bit striping. QEMU misbehaves in the (corner) case where
data is written/read in dual-parallel mode and read/written back in
single mode.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 718a61df1bf746ec06f6da44d12f8317af7b08ce.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CTRL register was RAZ/WI on some of the RW bits. Even though the
function behind these bits is invalid in QEMU, they should still be
guest accessible. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: b7aaad93163ce4af0c428635804ac7b77a567b25.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The LQSPI mode is supposed to work via the automatic CS mode feature
rather than manipulate CS lines itself. Now that auto CS is implemented
remove LQSPIs CS mode override logic. There is still a need to
manipulate the U_PAGE bit in LQSPI config register to implement
dual-stack mode however.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 000c8dd54df09523f17052638100722ef0f5a3af.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the automatic CS control feature. If the MANUAL_CS bit is
cleared then the chip select stay de-asserted as long as the tx FIFO
is empty.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1d67383adc42761af715a93f161344b9284dfc9a.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SPI has a mode where it automatically starts based on tx fifo
occupancy. Implemented.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: f4e9accb5de87b526fff6ed937f63278db76533b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Invalidate the LQSPI cached page when transitioning into LQSPI mode.
Otherwise there is a possibility that the controller will return stale
data to the guest when transitioning back to LQ_MODE after a page
program.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 677490a6ee1953fe5d366e599d665de645ac84db.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QSPI has a bigger FIFO than the regular SPI controller. Differentiate
between the two with correct FIFO sizes for each.
This is the first piece of class data for SPIPS, so this patch sees
the creation of the XilinxSPIPSClass definition and assoicated QOM
constructs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: acee25dd5e203215cbc15ca5d3cb5d5b2efebe7b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
You really need this is you want to track a guest banging on LQSPI.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 26e508da4af11058d37daa777064c9e5c2a69abb.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The real hardware does not produce interrupts in LQSPI mode. Inhibit
generation of interrupts when the LQ_MODE bit is set.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: dff794a06872009ea7e5733ce6adcff94d18bbd0.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By default these interrupts are clear on read.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 999ff0091ed3cc3969a431bf55c00ef934cecc8e.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make SPI and QSPI different classes. QSPIPS is setup as a child of SPIPS.
Only QSPI has the LQSPI functionality, so move all that to the child class.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 2cdd0cadb5ba77ca02fde5cae627852dc9a64c71.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Call kvmclock_create only if kvmclock_enabled.
Use pc_init_pci on Xen rather than pc_init_pci_no_kvmclock.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
No need for xen_vcpu_init anymore:
- the RTC emulator doesn't have any periodic timers continuously running
even in absence of guest interactions anymore;
- qemu_dummy_start_vcpu takes care of disabling TCG for us, so we don't
need to do it manually here.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
We are currently setting the PCI hole to start at HVM_BELOW_4G_RAM_END,
that is 0xf0000000.
Start the PCI hole at 0xe0000000 instead, that is the same value used by
pc_init1 and qemu-xen-traditional.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: qemu-stable@nongnu.org
This fixes a regression introduced by:
commit 62fc403f11
Author: Igor Mammedov <imammedo@redhat.com>
Date: Mon Apr 29 18:54:13 2013 +0200
target-i386: Attach ICC bus to CPU on its creation
X86CPU should have parent bus so it could provide bus for child APIC.
The commit makes it mandatory to pass a valid ICC bus to cpu_x86_create,
but cpu_x86_init just passes NULL to it.
xen_machine_pv uses cpu_x86_init, therefore it has been broken.
This patch fixes the problem by removing the dummy CPU creation
altogether from xen_init_pv, relying on the fact that QEMU can now cope
with a machine without an emulated CPU.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
CC: imammedo@redhat.com
CC: qemu-stable@nongnu.org
# By Gerd Hoffmann (5) and others
# Via Gerd Hoffmann
* kraxel/usb.83:
xhci: add live migration support
xhci: add xhci_init_epctx
xhci: add xhci_alloc_epctx
xhci: add XHCISlot->addressed
pci: add VMSTATE_MSIX
host-libusb: Correct test for USB packet state
Fix usage of USB_DEV_FLAG_IS_HOST flag.
Message-id: 1370253951-12323-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Ed Maste (3) and others
# Via Michael Tokarev
* mjt/trivial-patches:
do not check pointers after dereferencing them
m25p80: Add Micron n25q032a
qemu: fix out of tree cross compile
slirp: cleanup leftovers from misc.h
migration: Remove duplicate bandwidth_limit set
docs: Fix typo and update file in migration
configure: try pkg-config ncurses first
rtc: remove rtc_set_date
linux-user: Fix typo in comment
configure: remove confusing file manipulation
debugcon: fix compiler warning when open DEBUG_DEBUGCON
debugcon: make debug message more readable
debugcon: fix always print "addr=0x0, val=0x0" bug when use DEBUG_DEBUGCON
Remove unnecessary break statements
don't run pkg-config for features explicitly disabled
Message-id: 51A9CCFB.1000109@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With all preparing pieces in place we can finally drop in
the vmstate structs and the postload function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out endpoint context initialization to a separate function.
xhci live migration will need that too, in post_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out endpoint context allocation to a separate function.
xhci live migration will need that too, in post_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using a trick cut+pasted from vmstate_scsi_device
to wind up msix_save and msix_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
USB_RET_ASYNC is -6, so inflight was always false.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USB_DEV_FLAG_IS_HOST is the bit number, not value. Booting with a
"Fitbit Base Station" USB dongle was triggering this assert.
Signed-off-by: Michael Marineau <mike@marineau.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit d08151bf (conversion of tcx to the memory API) broke the 24-bit mode of
the tcx display adapter by accidentally passing in the final address of the
dirty region to memory_region_reset_dirty() instead of its size.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make sure we only have a single instance ever:
because if it isn't we can't find it so it's
useless anyway.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove some code duplication by adding a
function to look up the fw cfg file.
This way, we don't need to duplicate same strings everywhere.
Use by both fw cfg and pvpanic device.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently some places use pointer-to-void even though they mean
pointer-to-FWCfgState. Clean them up.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
apic has its own version of bitops, with the
difference that it works on u32 and not long.
Add apic_ prefix to avoid namespace clashes.
We should look into reusing standard bitops long-term,
but that's not entirely trivial.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
firmware_abi.h with structs for OpenBIOS landed in hw/sparc/ by mistake
- move it to hw/nvram/ alongside fw_cfg.h. In addition to sparc it's
included from ppc mac_nvram.c and will need to include it from prep.c in
the future.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Looks like dec.c is in pci-host by mistake.
Moving it over to pci-bridge.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
compiler warnings:
CC hw/char/debugcon.o
hw/char/debugcon.c: In function ‘debugcon_ioport_write’:
hw/char/debugcon.c:58: warning: format ‘%02x’ expects type ‘unsigned int’, but argument 3 has type ‘uint64_t’
hw/char/debugcon.c: In function ‘debugcon_ioport_read’:
hw/char/debugcon.c:70: warning: format ‘%04x’ expects type ‘unsigned int’, but argument 2 has type ‘hwaddr’
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix these warnings from cppcheck:
hw/display/cirrus_vga.c:2603:
hw/sd/sd.c:348:
hw/timer/exynos4210_mct.c:1033:
target-arm/translate.c:9886:
target-s390x/mem_helper.c:518:
target-unicore32/translate.c:1936:
style: Consecutive return, break, continue, goto or throw statements are unnecessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recent virtio refactoring in QEMU made virtio-bus become the parent bus
of scsi-bus, and virtio-bus doesn't have get_fw_dev_path implementation,
typename will be added to fw_dev_path by default, the new fw_dev_path
could not be identified by seabios. It causes that bootindex parameter
of scsi device doesn't work.
This patch implements get_fw_dev_path() in BusClass, it will be called
if bus doesn't implement the method, tyename will be added to
fw_dev_path. If the implemented method returns NULL, nothing will be
added to fw_dev_path.
It also implements virtio_bus_get_fw_dev_path() to return NULL. Then
QEMU will still pass original style of fw_dev_path to seabios.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1369814202-10346-1-git-send-email-akong@redhat.com
--
v2: only add nothing to fw_dev_path when get_fw_dev_path() is
implemented and returns NULL. then it will not effect other devices
don't have get_fw_dev_path() implementation.
v3: implement default get_fw_dev_path() in BusClass
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
PCI host bridges need to set fw_name to be discoverable
by bios for boot device selection.
In particular, seabios expects root device to be called
"/pci/@i0cf8", so let's set it up like that for Q35.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Amos Kong <akong@redhat.com>
The implementation is wrong for kvm, and it's unused anyway.
Drop it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130528102023.GA30055@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When pc-sysfw.rom_only == 0, flash memory will be
usable with kvm. In order to enable flash memory mode,
a pflash device must be created. (For example, by
using the -pflash command line parameter.)
Usage of a flash memory device with kvm requires
KVM_CAP_READONLY_MEM, and kvm will abort if
a flash device is used with an older kvm which does
not support this capability.
If a flash device is not used, then qemu/kvm will
operate in the original rom-mode.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-5-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The isapc machine with seabios currently requires the BIOS region
to be read/write memory rather than read-only memory.
KVM currently cannot support the BIOS as a ROM region, but qemu
in non-KVM mode can. Based on this, isapc machine currently only
works with KVM.
To work-around this isapc issue, this change avoids marking the
BIOS as readonly for isapc.
This change also will allow KVM to start supporting ROM mode
via KVM_CAP_READONLY_MEM.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-2-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Aneesh Kumar K.V (3) and Gabriel de Perthuis (1)
# Via Aneesh Kumar K.V
* aneesh/for-upstream:
hw/9pfs: Be robust against paths without FS_IOC_GETVERSION
hw/9pfs: Use O_NOFOLLOW when opening files on server
hw/9pfs: use O_NOFOLLOW for mapped readlink operation
hw/9pfs: Fix segfault with 9p2000.u
Message-id: 87zjvevx4s.fsf@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
9P optionally uses the FS_IOC_GETVERSION ioctl to get information about
a file's version (sometimes called generation number).
The code checks for supported filesystems at mount time, but some paths
may come from other mounted filesystems.
Change it to treat unsupported paths the same as unsupported
filesystems, returning 0 in both cases.
Note: ENOTTY is the error code for an unsupported ioctl.
This fix allows booting a linux kernel with the same / filesystem as the
host; otherwise the boot fails when mounting devtmpfs.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
9p server should never follow a symlink. So use O_NOFOLLOW with all open
syscall
Tested-by: "M. Mohan Kumar" <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
With mapped security models like mapped-xattr and mapped-file, we save the
symlink target as file contents. Now if we ever expose a normal directory
with mapped security model and find real symlinks in export path, never
follow them and return proper error.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
When guest tries to chmod a block or char device file over 9pfs,
the qemu process segfaults. With 9p2000.u protocol we use wstat to
change mode bits and client don't send extension information for
chmod. We need to check for size field to check whether extension
info is present or not.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Sun4c and Sun4d architectures and related CPUs are not fully implemented
(especially Sun4c MMU) and there has been no interest for them.
Likewise, a few CPUs (Cypress, Ross etc) are only half implemented.
Remove the machines and CPUs, they can be re-added if needed later.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
# By Paolo Bonzini (11) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
memory: clean up phys_page_find
memory: populate FlatView for new address spaces
memory: limit sections in the radix tree to the actual address space size
s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62
memory: fix address space initialization/destruction
memory: make memory_global_sync_dirty_bitmap take an AddressSpace
memory: do not duplicate memory_region_destructor_none
memory: Rename readable flag to romd_mode
memory: Replace open-coded memory_region_is_romd
memory: allow memory_region_find() to run on non-root memory regions
memory: assert that PhysPageEntry's ptr does not overflow
exec: eliminate stq_phys_notdirty
exec: make qemu_get_ram_ptr private
exec: eliminate qemu_put_ram_ptr
exec: remove obsolete comment
Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.
So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Net queues support efficient "receive disable". For example, tap's file
descriptor will not be polled while its peer has receive disabled. This
saves CPU cycles for needlessly copying and then dropping packets which
the peer cannot receive.
rtl8139 is missing the qemu_flush_queued_packets() call that wakes the
queue up when receive becomes possible again.
As a result, the Windows 7 guest driver reaches a state where the
rtl8139 cannot receive packets. The driver has actually refilled the
receive buffer but we never resume reception.
The bug can be reproduced by running a large FTP 'get' inside a Windows
7 guest:
$ qemu -netdev tap,id=tap0,...
-device rtl8139,netdev=tap0
The Linux guest driver does not trigger the bug, probably due to a
different buffer management strategy.
Reported-by: Oliver Francke <oliver.francke@filoo.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Christophe Lyon (1) and others
# Via Michael Tokarev
* mjt/trivial-patches:
target-moxie: replace target_phys_addr_t with hwaddr
Rename hexdump to avoid FreeBSD libutil conflict
remove some double-includes
translate: remove redundantly included qemu/timer.h
Remove twice include of qemu-common.h
fix /proc/self/maps output
Message-id: 51977B44.1000302@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support guest MSI affinity changes update the MSI message any time
the guest writes to the address or data fields.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130513201840.5430.86331.stgit@bling.home
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Virtio-net driver currently negotiates network offloads
on startup via features mechanism and have no ability to
disable and re-enable offloads later.
This patch introduced a new control command that allows
to configure device network offloads state dynamically.
The patch also introduces a new feature flag
VIRTIO_NET_F_CTRL_GUEST_OFFLOADS.
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130520081814.GA8162@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This unbreaks cross compile builds:
configure --target-list="i386-softmmu" --cpu=i386
When building on a 64bit machine.
Reported-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 926326e96fd8685d74e9d5bf430fe4ad97a55289.1369191585.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368718348-15199-1-git-send-email-emaste@freebsd.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 215e47b9 enabled TRIM by default, which revealed a bug in TRIM
support for the IDE macio emulation driver, introduced in d353fb72.
The call to dma_bdrv_io() is using a wrong opaque of type IDEState
instead of DBDMA_io. This patch fixes that.
Fixes LP#1179104
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds virtio_bus_get_dev_path to fix migration id string which is wrong
since the virtio refactoring.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368723967-21050-1-git-send-email-fred.konrad@greensocs.com
Cc: mdroth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although we try our best to automatically detect broken versions
of Linux which assume the old broken IRQ mapping we used to implement
for our model of the Versatile PCI controller, it turns out that
some particularly new kernels manage to outwit the autodetection.
We therefore provide a property for enabling the old broken IRQ
mapping, so that if users happen to have such a kernel they can
work around its deficiencies with the command line option:
-global versatile_pci.broken-irq-mapping=1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Newer versatilepb kernels still don't get the IRQ mapping right
for the PCI controller, but they get it differently wrong (they add
a fixed +64 offset to everything they write to PCI_INTERRUPT_LINE).
Update the autodetection to handle these too, and include a more
detailed comment on the various different behaviours that might
be present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 5f37ef92b7.
It turns out that some kernels incorrectly depend on the
old QEMU behaviour of not putting the host PCI bridge device
where the hardware puts it, because they use a swizzling IRQ
mapping which is incorrect but happens to match up with old
broken QEMU when the slot number mod 4 is zero. Since we
start PCI devices at 11, if we put the host bridge at 29
then the first real PCI device goes at 11 and doesn't work.
Not putting the host bridge at 29 means it defaults to 11,
so the first real PCI device is at 12 and works.
Since continuing with the old behaviour doesn't cause problems
for kernels which do work with hardware, the simplest fix for
this is to revert the change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This forwards the name and the type of virtio-net-x to fix the bad
behaviour of "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds virtio_net_set_netclient_name, which is used to set the
name and type shown in "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 9953f8822c.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Dong Xu Wang (2) and others
# Via Michael Tokarev
* mjt/trivial-patches-next:
osdep.h: include sys/types.h for ssize_t definition
remove double semicolons
clean unnecessary code: don't check g_strdup arg for NULL
docs: mention AddressSpaces in docs/memory.txt
audio: update documentation after removing --audio-card-list option
m25p80.c: Sync Flash chip list with Linux
bsd-user: OS-agnostic 64-bit SYSCTL types
Message-id: 518F61B9.9050803@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new devices for various manufacturers, and re-sort Spansion list to
match the order in Linux, which requires chips with a non-zero extended ID
to come first.
With this commit the outstanding differences to Linux rev 55bf75b are:
- Erase size flag differences in s25sl032p, s25sl064p, s25fl016k, s25fl064k
(These devices have only some blocks that support small erase sizes.)
- Linux lacks n25q128
- Devices without a Jedec ID have been excluded
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With a SPICE_DISPLAY_CAP_MONITORS_CONFIG capable client, the client needs to
know what part of the primary to use for each monitor. If the guest driver
does not support this, the server sends messages to the client for a
single monitor spanning the entire primary.
As soon as the guest calls spice_qxl_monitors_config_async once, the server
sets the red_worker driver_has_monitors_config flag and stops doing this.
This is a problem when the driver gets unloaded, for example after a reboot
or when switching to a text vc with usermode mode-setting under Linux.
To reproduce this start a multi-mon capable Linux guest which uses
usermode mode-setting and then once X has started switch to a text vc. Note
how the client window does not only not resize, if you try to resize it
manually you always keep blackborders since the aspect is wrong.
This patch calls a new spice-server method called spice_qxl_driver_unload
which clears the driver_has_monitors_config flag inside the server, thereby
fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Kevin Wolf (7) and Fam Zheng (3)
# Via Kevin Wolf
* kwolf/for-anthony:
qemu-iotests: fix 017 018 for vmdk
qemu-iotests: exclude vmdk and qcow from 043
qemu-iotests: exclude vmdk for test 042
qtest/ide-test: Test short and long PRDTs
qtest/ide-test: Add simple DMA read/write test case
qtest: Add IDE test case
libqos/pci: Enable bus mastering
ide: Reset BMIDEA bit when the bus master is stopped
de_DE.po: Add missing leading spaces
ahci: Don't allow creating slave drives
Message-id: 1368023344-29731-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are several several issues in the current checking:
- The check was based on the minus of unsigned values which can overflow
- It was done after .{set|get}_config() which can lead crash when config_len
is zero since vdev->config is NULL
Fix this by:
- Validate the address in virtio_pci_config_{read|write}() before
.{set|get}_config
- Use addition instead minus to do the validation
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Petr Matousek <pmatouse@redhat.com>
Message-id: 1367905369-10765-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
mask notifiers are never called without msix,
so devices with backend masking like vhost don't work.
Call mask notifiers explicitly at
startup/cleanup to make it work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The device is supposed to reset the Bus Master IDE Active bit in the
status register when 0 is written to the Start/Stop Bus Master bit in
the command register.
In the common cases this happens automatically because bdrv_drain_all()
flushes the requests, but with a large PRDT it could remain set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An IDE bus provided by AHCI can only take a single IDE drive. If you add
a drive as slave, qemu used to accept the command line but the device
wouldn't be actually usable. Catch the situation instead and error out.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Gerd Hoffmann (3) and Hans de Goede (1)
# Via Gerd Hoffmann
* kraxel/usb.82:
xhci: handle USB_RET_BABBLE
uhci: Use an intermediate buffer for usb packet data
usb-host: add usb_host_full_speed_compat
usb-host: live migration support for the libusb version
Message-id: 1367920207-1404-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 32993698 (vhost: disable on tap link down) tries to disable the vhost
also when the peer's link is down. But the check was not done properly, the
vhost were only started when:
1) peer's link is not down
2) virtio-net has already been started.
Since == have a higher precedence than &&, place a brace to make sure both the
conditions were met then does the check. This fixes the crash when doing a savem
after set the link off which let qemu crash and complains:
virtio_net_save: Assertion `!n->vhost_started' failed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1366972060-21606-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Eduardo Habkost (6) and others
# Via Andreas Färber
* afaerber/qom-cpu:
target-i386: n270 can MOVBE
target-i386: Introduce generic CPUID feature compat function
target-i386: Change CPUID model of 486 to 8
target-i386: Emulate X86CPU subclasses for global properties
qdev: Introduce qdev_prop_set_globals_for_type()
qdev: Let qdev_prop_parse() pass through Error
target-i386: Add "filtered-features" property to X86CPU
target-i386: Introduce X86CPU::filtered_features field
target-i386: Add "feature-words" property to X86CPU
target-i386: Use FeatureWord loop on filter_features_for_kvm()
target-i386: Add ECX information to FeatureWordInfo
Due to various unfortunate reasons we cannot reliable detect a guest
cancelling a packet as soon as it happens, instead we detect cancels
with some delay.
When packets are handled async, and we directly pass the guest memory for
the packet to the usb-device as iovec, this means that the usb-device can
write to guest-memory which the guest has already re-used for other purposes
-> not good!
This patch fixes this by adding an intermediate buffer and writing back not
only the result, but also the data, of async completed packets when scanning
the schedule.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alloes to pass through usb2 devices on usb1 host controllers if possible.
Brings the libusb implementation to feature-parity with the linux usbfs
code, so the usb-host implementation in 1.5 (libusb) doesn't regress
compared to 1.4 (usbfs).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Atom core (cpu name "n270" in QEMU speak) supports MOVBE. This is
needed when booting 3.8 and later linux kernels built with the MATOM
target because we require MOVBE in order to boot properly now.
Signed-off-by: Borislav Petkov <bp@suse.de>
[ehabkost: added compat code to disable MOVBE on pc-*-1.4 and older]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390: update s390-ccw.img
S390: BIOS boot from given device
S390: Add virtio-blk boot
S390: Merging s390_ipl_cpu and s390_ipl_reset
S390: BIOS create link to src folder for .img file
S390: BIOS check for file
Reuse it in qdev_prop_set_globals().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Renamed from qdev_prop_set_custom_globals()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
If no kernel IPL entry is specified, boot the bios and pass if available
device information for the first boot device (as given by the boot index).
The provided information will be used in the next commit from the BIOS.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
There is no use in have this splitted in two functions.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a check if the BIOS blob exists before trying to load.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Normally, the "tap" device is polled by QEMU if a guest NIC can
receive packets. If a guest NIC is stopped during transfer (rmmod or
ifdown), it may still have packets in a queue which have to be send
to the guest before QEMU enables polling of a "tap" interface via
tap_update_fd_handler().
However the spapr_llan device was missing the qemu_flush_queued_packets()
call so the tap_send_completed() callback was never called and therefore
"tap" interface polling was not enabled ever.
The patch fixes this problem.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
We should sync params->ram_size after we fixup memory size on
a alignment boundary. Otherwise Guest would exceed the actual
memory region.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
ePAPR defines the initial values of cpu registers.
This patch initialize the GPRs as per ePAPR specification.
This resolves the issue of guest reboot/reset (guest hang on reboot).
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: add whitespace line]
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to a brain outage, this message says "out-of-boards" instead of
"out-of-bounds".
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR defines LIOBNs (Logical IO Bus Numbers) to be 32-bit, and we check for
values that aren't in the code for H_PUT_TCE. This patch factors the check
into spapr_tce_find_by_liobn(), which already checks if a 32-bit LIOBN
actually exists. This will become more important as future patches add
other hypercalls which need to look up a LIOBN.
At the same time we fix the typo in the message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
# By Andreas Färber (1) and others
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Make System I/O port 0092 read/write
prep: Add ELF support for -bios
prep: Fix NIP reset value
# By Jean-Christophe DUBOIS
# Via Peter Maydell
* pmaydell/arm-devs.next:
i.MX: implement a more correct version of EPIT timer.
Message-id: 1367603215-5120-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Port 0x0092 is documented as read/write, so for now return the
endianness state instead of hardcoded 0x00.
Signed-off-by: Julio Guerra <guerr@julio.in>
[AF: Extracted from larger port 0092 patch]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This prepares for switching from OpenHack'Ware to OpenBIOS.
While touching the error handling code, switch from aborting hw_error()
to fprintf()+exit() and suppress failing without -bios for qtest.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
The value was changed by commit 09d9828ace
"PPC: fix hreset_vector for 60x, ...".
Change it back for prep machine to unbreak OpenHack'Ware.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This patch is providing a complete version of the EPIT timer.
Note, however that the GPT timer in the same file is still not
complete.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1365624982-15647-1-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
[PMM: wrapped an overly long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 2f7bd829db "qdev: Fix device_add bus assumptions"
it's possible to device_add bus-less device, but if such device is
unplugged it will dereference NULL parent_bus in qdev_unplug().
Fix it by taking in account that parent_bus might be NULL and
skipping bus check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1367587536-14964-1-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the possibility to create a scsi-bus with a specified name.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add virtio_device_set_child_bus_name function.
It will be used with virtio-serial-x and virtio-scsi-x to set the
child bus name before calling virtio-x-device's init.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the proxy id is set, this bus takes the name "id.0" which is expected
to be the virtio-device's first bus.
So force this name to "virtio-bus" as it is an internal bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Igor Mammedov (21) and others
# Via Andreas Färber
* afaerber/qom-cpu: (29 commits)
Drop redundant resume_all_vcpus() from main()
cpus: Fix pausing TCG CPUs while in vCPU thread
target-i386: Replace cpuid_*features fields with a feature word array
target-i386: Break CPUID feature definition lines
target-i386/kvm.c: Code formatting changes
target-i386: Group together level, xlevel, xlevel2 fields
pc: Implement QEMUMachine::hot_add_cpu hook
QMP: Add cpu-add command
Add hot_add_cpu hook to QEMUMachine
target-i386: Move APIC to ICC bus
target-i386: Attach ICC bus to CPU on its creation
target-i386: Introduce ICC bus/device/bridge
cpu: Move cpu_write_elfXX_note() functions to CPUState
kvmvapic: Make dependency on sysbus.h explicit
target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZE
target-i386: Do not allow to set apic-id once CPU is realized
target-i386: Introduce apic-id CPU property
target-i386: Introduce feat2prop() for CPU properties
acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guest
cpu: Add helper cpu_exists(), to check if CPU with specified id exists
...
This replaces the feature-bit fields on both X86CPU and x86_def_t
structs with an array.
With this, we will be able to simplify code that simply does the same
operation on all feature words (e.g. kvm_check_features_against_host(),
filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit
property lookup/registration, and the proposed "feature-words" property)
The following field replacements were made on X86CPU and x86_def_t:
(cpuid_)features -> features[FEAT_1_EDX]
(cpuid_)ext_features -> features[FEAT_1_ECX]
(cpuid_)ext2_features -> features[FEAT_8000_0001_EDX]
(cpuid_)ext3_features -> features[FEAT_8000_0001_ECX]
(cpuid_)ext4_features -> features[FEAT_C000_0001_EDX]
(cpuid_)kvm_features -> features[FEAT_KVM]
(cpuid_)svm_features -> features[FEAT_SVM]
(cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
similiar -> similar
recieve -> receive
transfered -> transferred
preperation -> preparation
Most changes are in comments, one modifies a parameter name in a function
prototype.
The spelling fixes were made using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It allows APIC to be hotplugged.
* map APIC's mmio at board level if it is present
* do not register mmio region for each APIC, since
only one is used/mapped
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
X86CPU should have parent bus so it could provide bus for child APIC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Provides a hotpluggable bus for APIC and CPU.
* icc-bridge will serve as a parent for icc-bus and provide
mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
and IOAPIC devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Allows kvmvapic to compile if sysbus.h is removed from apic_internal.h,
from which it is indirectly included.
sysbus.h will be removed from apic_internal.h after converting
APICs to ICCDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Put APIC_SPACE_SIZE in a public header so that it can be
reused elsewhere later.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The property is used from board level to set APIC ID for CPUs it
creates. Do so in a new pc_new_cpu() helper, to be reused for hot-plug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* introduce processor status bitmask visible to guest at 0xaf00 addr,
where ACPI asl code expects it
* set bit corresponding to APIC ID in processor status bitmask on
receiving CPU hot-plug notification
* trigger CPU hot-plug SCI, to notify guest about CPU hot-plug event
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It provides updated currently available CPUs count to BIOS on reboot.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 14f9b664 (hw/virtio-net.c: set config size using host features) tries to
calculate config size based on the host features. But it forgets the
VIRTIO_NET_F_MAC were always set for qemu later. This will lead a zero config
len for virtio-net device when both VIRTIO_NET_F_STATUS and VIRTIO_NET_F_MQ were
disabled form command line. Then qemu will crash when user tries to read the
config of virtio-net.
Fix this by counting VIRTIO_NET_F_MAC and make sure the config at least contains
the mac address.
Cc: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1366874814-2658-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets seabios patch the corresponding SSDT entry.
Also add fw_cfg object to /machine/fw_cfg so we can reference
it elsewhere.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 60c65d95fe2b23b12bea67099126566010a11a1a.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pvpanic device is used to send guest panic event from guest to qemu.
When guest panic happens, pvpanic device driver will write a event
number to IO port 0x505(which is the IO port occupied by pvpanic device,
by default). On receiving the event, pvpanic device will pause guest
cpu(s), and send a qmp event QEVENT_GUEST_PANICKED.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Better than just releasing the error object silently.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 517E68FC.6030400@siemens.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduced when applying commit f81222b (audio: look for the ISA and
PCI buses, 2013-04-18).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1367330432-14417-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-21-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Drop reserved underscore from struct name while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-20-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST() and
container_of(). Prepares for ISA realizefn.
Remove reserved underscore from struct name while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-19-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST() and
container_of(). Prepares for ISA realizefn.
Unify function naming scheme while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-18-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-17-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-16-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-15-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-14-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-13-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-12-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-11-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-10-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-9-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST() and
container_of().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-8-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Add missing braces.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-7-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Eliminate DO_UPCAST() for PICCommonState. Prepares for ISA realizefn.
Also give the i8259_common type registration functions unique names
while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-6-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-5-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Reuse type constant for PC machine compatibility settings.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-4-git-send-email-afaerber@suse.de
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a typedef for the state struct and rename from Status to State.
Add type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-2-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Multiqueue patchset conditionally add control vq only when guest negotiate the
feature. Though the spec is not clear on this but it breaks the minix guest
since it will identify the ctrl vq even if it does not support it. Though this
behavior seems a violation on the spec "If the VIRTIO_NET_F_CTRL_VQ feature bit
is negotiated, identify the control virtqueue.", to keep the backward
compatibility, always add the ctrl vq at end of the queues.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1366874663-2566-1-git-send-email-jasowang@redhat.com
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Cole Robinson
# Via Alon Levy
* alon/libcacard_ccid.2:
ccid: Fix crash when backend isn't specified
Message-id: 20130426234357.GA12457@garlic.tami
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Every PCI Slot in PBM has 4 directly mapped IRQ lines.
Use the IRQ routing schema 0bssnn (Bus, Slot, interrupt Number)
described in Section 19.3.3 of UltraSPARC™-IIi User's Manual.
Please note that this patch requires the OpenBIOS counterpart patch.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- clear interrupts only on writing to the interrupt clear registers
- don't overwrite a currently active interrupt request
- use the correct addresses for the interrupt clear registers
(section 19.3.3.3 of the UltraSPARC™-IIi User’s Manual)
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to UltraSPARC™-IIi User’s Manual, PBM has 64 IRQ lines.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (30 commits)
target-ppc: add support for extended mtfsf/mtfsfi forms
target-ppc: emulate store doubleword pair instructions
target-ppc: emulate load doubleword pair instructions
target-ppc: emulate lfiwax instruction
target-ppc: emulate fcpsgn instruction
target-ppc: emulate prtyw and prtyd instructions
target-ppc: emulate cmpb instruction
target-ppc: add instruction flags for Book I 2.05
disas: Disassemble all ppc insns for the guest
target-ppc: optimize fabs, fnabs, fneg
PPC: Fix dcbz for linux-user on 970
powerpc: correctly handle fpu exceptions.
pseries: Generate device paths for VIO devices
pseries: Convert VIO code to QOM style type safe(ish) casts
target-ppc: Synchronize VPA state with KVM
pseries: Fix some small errors in XICS logic
target-ppc: Add more stubs for POWER7 PMU registers
pseries: Fixes and enhancements to L1 cache properties
pseries: Fix incorrect calculation of RMA size in certain configurations
PPC: Fix compile with profiling enabled
...
This patch implements a get_dev_path qdev hook for the pseries paravirtual
VIO bus. With upcoming savevm support, this will become very important for
scsi disks hanging of VIO virtual SCSI adapters. scsibus_get_dev_path
uses the get_dev_path of the parent adapter if available, but otherwise
just uses a local channel/target/lun number to identify the device. So if
two disks are present in the system having the same target and lun on
seperate VIO scsi adapters, savevm cannot distinguish them. Since the
conventional way of using VSCSI adapters is to have just one disk per
adapter, such a conflict is very likely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Curerntly the pseries VIO device code contains quite a few explicit
uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe,
and not the conventional way of doing things in the QOM model. This
patch converts the code to use the QOM convention of per-type macros
to do verified casts with OBJECT_CHECK().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Under certain circumstances the emulation for the pseries "XICS" interrupt
controller was clearing a pending interrupt from the XISR register, without
also clearing the corresponding priority variable. This will cause
problems later when can trigger sanity checks in the under-development
in-kernel XICS implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR requires that the device tree's CPU nodes have several properties
with information about the L1 cache. We already create two of these
properties, but with incorrect names - "[id]cache-block-size" instead
of "[id]-cache-block-size" (note the extra hyphen).
We were also missing some of the required cache properties. This
patch adds the [id]-cache-line-size properties (which have the same
values as the block size properties in all current cases). We also
add the [id]-cache-size properties.
Adding the cache sizes requires some extra infrastructure in the
general target-ppc code to (optionally) set the cache sizes for
various CPUs. The CPU family descriptions in translate_init.c can set
these sizes - this patch adds correct information for POWER7, I'm
leaving other CPU types to people who have a physical example to
verify against. In addition, for -cpu host we take the values
advertised by the host (if available) and use those to override the
information based on PVR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
On -M mac99, we can run 970 CPUs. However, these CPUs define the initial
instruction pointer they start execution at as part of their bootup protocol,
so effectively it's up to the board to decide where they start.
This went unnoticed, because they used to boot at the same location our flash
was mapped to, but due to the recent reset changes our 970 CPUs want to reset
to 0x100 now, which is always a 0 instruction.
Set the initial IP to something reasonable for -M mac99.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Enable the KVM emulated watchdog if KVM supports (use the
capability enablement in watchdog handler). Also watchdog exit
(KVM_EXIT_WATCHDOG) handling is added.
Watchdog state machine is cleared whenever VM state changes to running.
This is to handle the cases like return from debug halt etc.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: rebase to current code base, fix non-kvm cases]
Signed-off-by: Alexander Graf <agraf@suse.de>
This value is not needed if we use correctly the MSR[IP] bit.
excp_prefix is always 0x00000000, except when the MSR[IP] bit is
implemented and set to 1, in that case excp_prefix is 0xfff00000.
The handling of MSR[IP] was already implemented but not used at reset
because the value of env->msr was changed "manually".
The patch uses the function hreg_store_msr() to set env->msr, this
ensures a good handling of MSR[IP] at reset, and therefore a good value
for excp_prefix.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Older KVM versions don't support EPR which breaks guests when we announce
MPIC variants that support EPR.
Catch that case and expose only MPIC version 2.0 which tells the guest that
we don't support the EPR capability yet.
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: Add comment, route cap check through kvm_ppc.c]
Signed-off-by: Alexander Graf <agraf@suse.de>
I don't see any reason why these properties are missing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Note: Need to apply virtio-rng-refactoring first!
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since we now have working firmware for s390-ccw in the tree, we can
default to it on our s390-ccw machine, rendering it more useful.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a virtio-s390 and a virtio-ccw machine in QEMU. Both use vastly
different ways to do I/O. Having the same firmware blob for both doesn't
really make any sense.
Instead, let's parametrize the firmware file name, so that we can have
different blobs for different machines.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our firmware blob is always a raw file that we load at a fixed address today.
Support loading an ELF blob instead that we can map high up in memory.
This way we don't have to be so conscious about size constraints.
Signed-off-by: Alexander Graf <agraf@suse.de>
We can have different load addresses for different blobs we boot with.
Make the reset IP dynamic, so that we can handle things more flexibly.
Signed-off-by: Alexander Graf <agraf@suse.de>
If a guest neglected to register (secondary) indicators but still runs
with notifications enabled, we might end up writing to guest zero;
avoid this by checking for valid indicators and only writing to the
guest and generating an interrupt if indicators have been setup.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Use of a flash memory device for the BIOS was added in series "[PATCH
v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1.
Flash vs. ROM is a guest-visible difference. Thus, flash use had to
be suppressed for machine types pc-1.0 and older. This was
accomplished by adding a dummy device "pc-sysfw" with property
"rom_only":
* Non-zero rom_only means "use ROM". Default for pc-1.0 and older.
* Zero rom_only means "maybe use flash". Default for newer machines.
Not only is the dummy device ugly, it was also retroactively added to
the older machine types! Fortunately, it's not guest-visible (thus no
immediate guest ABI breakage), and has no vmstate (thus no immediate
migration breakage). Breakage occurs only if the user unwisely
enables flash by setting rom_only to zero. Patch review FAIL #1.
Why "maybe use flash"? Flash didn't (and still doesn't) work with
KVM. Therefore, rom_only=0 really means "use flash, except when KVM
is enabled, use ROM". This is a Bad Idea, because it makes enabling/
disabling KVM guest-visible. Patch review FAIL #2.
Aside: it also precludes migrating between KVM on and off, but that's
not possible for other reasons anyway.
Fix as follows:
1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts,
or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything
for older machines (to remain bug-compatible).
2. Change the default value from 0 to 1 for these machines.
Necessary, because 0 doesn't work with KVM. Once it does, we can flip
the default back to 0.
3. Don't revert the retroactive addition of device "pc-sysfw" to older
machine types. Seems not worth the trouble.
4. Add a TODO comment asking for device "pc-sysfw" to be dropped once
flash works with KVM.
Net effect is that you get a BIOS ROM again even when KVM is disabled,
just like for machines predating the introduction of flash.
To get flash instead, use "--global pc-sysfw.rom_only=0".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the next commit easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the commit after next easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Alon Levy (15) and others
# Via Alon Levy
* alon/libcacard_ccid.1: (28 commits)
libcacard/cac: change big switch functions to single return point
dev-smartcard-reader: empty implementation for Mechanical (fail correctly)
libcacard: move atr setting from macro to function
libcacard/vreader: add debugging messages for apdu
dev-smartcard-reader: copy atr protocol to ccid parameters
dev-smartcard-reader: change default protocol to T=0
dev-smartcard-reader: define structs for CCID_Parameter internals
ccid-card-passthru, dev-smartcard-reader: add debug environment variables
ccid-card-passthru: add atr check
libcacard: change default ATR
dev-smartcard-reader: reuse usb.h definitions
dev-smartcard-reader: support windows guest
dev-smartcard-reader: remove aborts (never triggered, but just in case)
dev-smartcard-reader: nicer debug messages
dev-smartcard-reader: white space fixes
libcacard: remove default libcoolkey loading
libcacard: remove sql: prefix
libcacard: teach vscclient to use GMainLoop for portability
libcacard: vscclient to use QemuThread for portability
libcacard: split vscclient main() from socket reading
...
Message-id: 921423767.1475937.1366790789930.JavaMail.root@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This clean the init and the exit functions and rename virtio_common_cleanup
to virtio_cleanup.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove virtio-bindings, and use class instead.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the init, exit functions as they are no longer used.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio_x_bus_new are only used in file scope.
So this make them static.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This add two functions:
* virtio_bus_set_vdev_config.
* virtio_bus_set_vdev_feature.
Needed by virtio-ccw.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-rng-pci, virtio-rng-s390 and virtio-rng-ccw are
switched to the new API, we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-ccw is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-s390 is modified for the new API. The device
virtio-rng-s390 extends virtio-s390-device as before. It creates and
connects a virtio-rng during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-pci is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
The virtio_pci_reset function, is removed as no longer used.
The virtio_pci_rst function, is renamed virtio_pci_reset.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-rng-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The configuration field must not be a pointer as it will be used for
virtio-rng properties. So *conf is replaced by conf.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a linked list of keyboard handlers. Added handlers will go
to the head of the list. Removed handlers will be zapped from
the list. The head of the list will be used for events.
This fixes the keyboard-dead-after-usb-kbd-unplug issue, key events
will be re-routed to the ps/2 kbd instead of being discarded.
[ v2: fix cut+paste bug found my Markus ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1366798118-3248-3-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori