This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.
This defines AIL flags for LPCR special register.
This changes @excp_prefix according to the mode, takes effect in TCG.
This turns support of a new capability PPC2_ISA207S flag for TCG.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves H_SET_MODE_RESOURCE_LE handler to a separate function
as there are other "resources" coming and this is going to become ugly.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PR KVM supports an ePAPR compliant hypercall interface in parallel to the
normal sPAPR one. Expose the ePAPR /hypervisor node and properties to the
guest so it can use it.
This enables magic page sharing on PR KVM with -M pseries.
However we had a few nasty bugs in the magic page implementation on vcpus
newer than 970 (p7, p8) that KVM now has workarounds for. It indicates that
it does have these workarounds through the PPC_FIXUP_HCALL capability.
To not expose broken guest kernels to issues on host kernels that don't
have the fixups in place, we don't expose working hypercall instructions
when the fixups are not available so that the guest can never active the
magic page.
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix a typo in the ppce500_pci vmstate definition which meant that
we were migrating the struct pci_inbound using the vmstate for
pci_outbound. Fortunately the two structures have exactly the same
format at the moment (four uint32_ts) so this was harmless, and
we can correcting the typo without a migration compatibility
break because the vmstate name doesn't go out on the wire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts
from. It is set to 0 for emulated devices. Dynamic DMA windows will use
other offset.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR
spec allows other page sizes and we are going to implement them, we need
page size to be configrable.
This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT
with it where it is possible.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.
This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
qdev_init_nofail() was replaced by object_property_set_bool("realized")
all over the QEMU so do we.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment sPAPRPHBState contains a @tcet pointer to the only
TCE table. However sPAPR spec allows having more than one DMA window.
Since the TCE object is already a child of SPAPR PHB object, there is
no need to keep an additional pointer to it in sPAPRPHBState so remove it.
This changes the way sPAPRPHBState::reset performs reset of sPAPRTCETable
objects.
This changes the default DMA window properties calculation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the default DMA window is represented by a single MemoryRegion.
However there can be more than just one window so we need
a "root" memory region to be separated from the actual DMA window(s).
This introduces a "root" IOMMU memory region and adds a subregion for
the default DMA 32bit window. Following patches will add other
subregion(s).
This initializes a default DMA window subregion size to the guest RAM
size as this window can be switched into "bypass" mode which implements
direct DMA mapping.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The spapr-pci PHB initializes IOMMU for emulated devices only.
The upcoming VFIO support will do it different. However both emulated
and VFIO PHB types share most of the initialization code.
For the type specific things a new finish_realize() callback is
introduced.
This introduces sPAPRPHBClass derived from PCIHostBridgeClass and
adds the callback pointer.
This implements finish_realize() for emulated devices.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: Fix compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently only single TCE entry per request is supported (H_PUT_TCE).
However PAPR+ specification allows multiple entry requests such as
H_PUT_TCE_INDIRECT and H_STUFF_TCE. Having less transitions to the host
kernel via ioctls, support of these calls can accelerate IOMMU operations.
This implements H_STUFF_TCE and H_PUT_TCE_INDIRECT.
This advertises "multi-tce" capability to the guest if the host kernel
supports it (KVM_CAP_SPAPR_MULTITCE) or guest is running in TCG mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment the "ibm,hypertas-functions" list is fixed. However some
calls should be listed there if they are supported by QEMU or the host
kernel.
This enables hyperrtas_prop to grow on stack by adding
a SPAPR_HYPERRTAS_ADD macro. "qemu,hypertas-functions" is converted as well.
The first user of this is going to be a "multi-tce" property.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The timer registers on our KeyLargo macio emulation are read as byte reversed
from the big endian guest, so we better expose them endian reversed as well.
This fixes initial hickups of booting Mac OS X with -M mac99 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.
However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.
Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.
This fixes booting Mac OS X for me.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
SPAPR IOMMU is a bus-less device and therefore its only ID in
migration stream is an instance id which is not reliable ID
as it depends on the command line parameters order. Since
libvirt may change the order, we need something better than that.
This removes VMSD descriptor from the class definitiion and
registers it with @liobn as an intance ID to let the destination
side find the right device to receive migration data.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.
>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.
This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This puts a limit to the number of threads per core based on the current
compatibility mode. Although PowerISA specs do not specify the maximum
threads per core number, the linux guest still expects that
PowerISA2.05-compatible CPU supports only 2 threads per core as this
is what POWER6 (2.05 compliant CPU) implements, the same is for
POWER7 (2.06, 4 threads) and POWER8 (2.07, 8 threads).
This calls spapr_fixup_cpu_smt_dt() with the maximum allowed number of
threads which affects ibm,ppc-interrupt-server#s and
ibm,ppc-interrupt-gserver#s properties.
The number of CPU nodesremains unchanged.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
In PPC code we usually use the "cs" name for a CPUState* variables
and "cpu" for PowerPCCPU. So let's change spapr_fixup_cpu_dt() to
use same rules as spapr_create_fdt_skel() does.
This adds missing nodes creation if they do not already exist in
the current device tree, this is going to be used from
the client-architecture-support handler.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PAPR+ specification defines a ibm,client-architecture-support (CAS)
RTAS call which purpose is to provide a negotiation mechanism for
the guest and the hypervisor to work out the best compatibility parameters.
During the negotiation process, the guest provides an array of various
options and capabilities which it supports, the hypervisor adjusts
the device tree and (optionally) reboots the guest.
At the moment the Linux guest calls CAS method at early boot so SLOF
gets called. SLOF allocates a memory buffer for the device tree changes
and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options,
composes a diff for the device tree, copies it to the buffer provided
by SLOF and returns to SLOF. SLOF updates the device tree and returns
control to the guest kernel. Only then the Linux guest parses the device
tree so it is possible to avoid unnecessary reboot in most cases.
The device tree diff is a header with an update format version
(defined as 1 in this patch) followed by a device tree with the properties
which require update.
If QEMU detects that it has to reboot the guest, it silently does so
as the guest expects reboot to happen because this is usual pHyp firmware
behavior.
This defines custom KVMPPC_H_CAS hypercall. The current SLOF already
has support for it.
This implements stub which returns very basic tree (root node,
no properties) to the guest.
As the return buffer does not contain any change, no change in behavior is
expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds basic support for the "compat" CPU option. By specifying
the compat property, the user can manually switch guest CPU mode from
"raw" to "architected".
This defines feature disable bits which are not used yet as, for example,
PowerISA 2.07 says if 2.06 mode is selected, the TM bit does not matter -
transactional memory (TM) will be disabled because 2.06 does not define
it at all. The same is true for VSX and 2.05 mode. So just setting a mode
must be ok.
This does not change the existing behavior as the actual compatibility
mode support is coming in next patches.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
The upcoming support of the "ibm,client-architecture-support"
reconfiguration call will be able to change dynamically the number
of threads per core (SMT mode). From the device tree prospective
this does not change the number of CPU nodes (as it is one node per
a CPU core) but affects content and size of the ibm,ppc-interrupt-server#s
and ibm,ppc-interrupt-gserver#s properties.
This moves ibm,ppc-interrupt-server#s and ibm,ppc-interrupt-gserver#s
out of the device tree skeleton.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
When we trigger a system reset, the in-kernel openpic controller should also
get reset. This happens through a write to the GCR.RESET register which is
the same mechanism a guest would use to manually reset the device.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic emulation code maintains an allowable-CPU's bitmap
("destmask") for each IRQ source which is calculated from the IDR
register value whenever the guest OS writes to it. However, if the
guest OS relies on the system to set the IDR register to a default
value at reset, and does not write IDR, then destmask does not get
updated, and interrupts do not get propagated to the guest.
Additionally, if an IRQ source is marked as critical, the source's
internal "output" and "nomask" fields are not correctly reset when the
PIC is reset.
Fix both these issues by calling write_IRQreg_idr from within
openpic_reset, instead of simply setting the IDR register to the
specified idr_reset value.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch moves the definition of openpic_reset after the various
register read/write functions. No functional change. It is in
preparation for using the register read/write functions in
openpic_reset.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the macio DMA routines assume that all DMA requests are for read/write
block transfers. This is not always the case for ATAPI, for example when
requesting a TOC where the response is generated directly in the IDE buffer.
Detect these non-block ATAPI DMA transfers (where no lba is specified in the
command) and copy the results directly into RAM as indicated by the DBDMA
descriptor. This fixes CDROM access under MorphOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a "ibm,chip-id" property for CPU nodes which should be the same
for all cores in the same CPU socket. The recent guest kernels use this
information to associate threads with sockets.
Refer to the kernel commit 256f2d4b463d3030ebc8d2b54f427543814a2bdc
for more details.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.
This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.
This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.
The feature must be present in the host kernel.
This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Almost all platforms QEMU emulates have some sort of firmware they can load
to expose a guest environment that closely resembles the way it would look
like on real hardware.
This patch introduces such a firmware on our e500 platforms. U-boot is the
default firmware for most of these systems and as such our preferred choice.
For backwards compatibility reasons (and speed and simplicity) we skip u-boot
when you use -kernel and don't pass in -bios. For all other combinations like
-kernel and -bios or no -kernel you get u-boot as firmware.
This allows you to modify the boot environment, execute a networked boot through
the e1000 emulation and execute u-boot payloads.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to move to a model where firmware loads our kernel. To achieve
this we need to be able to tell firmware where the kernel lies.
Let's copy the mechanism we already use for -M pseries and expose the
kernel load address and size through the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds pci pin to irq_num routing callback.
This callback is called from pci_device_route_intx_to_irq to
find which pci device maps to which irq.
This fix is required for pci-device passthrough using vfio.
Also without this patch we gets below prints
"
PCI: Bug - unimplemented PCI INTx routing (e500-pcihost)
qemu-system-ppc64: PCI: Bug - unimplemented PCI INTx routing (e500-pcihost) "
and Legacy interrupt does not work with pci device passthrough.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[agraf: remove double semicolon]
Signed-off-by: Alexander Graf <agraf@suse.de>
- Use PCI_NUM_PINS rather than hardcoding
- use "pin" wherever possible
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment XICS does not support interrupts reuse so sPAPR PHB
implements this. sPAPRPHBState holds array of 32 spapr_pci_msi to
describe PCI config address, first MSI and number of MSIs. Once
allocated for a device, QEMU tries reusing this config until the number
of MSIs changes.
Existing SPAPR guests call ibm,change-msi in a loop until the handler
returns the requested number of vectors.
Recently introduced check for the maximum number of MSI/MSIX vectors
supported by a device only works for a device which is new for PHB's
MSI cache. If it is already there, the check is not performed which
leads to new IRQ block allocation. This happens during PCI hotplug
even when the user hot plug the same device which he just hot unplugged.
This moves the check earlier.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
While there, also moved the hard coded value for CLOCKFREQ to a #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Current guest kernels try allocating as many vectors as the quota is.
For example, in the case of virtio-net (which has just 3 vectors)
the guest requests 4 vectors (that is the quota in the test) and
the existing ibm,change-msi handler returns 4. But before it returns,
it calls msix_set_message() in a loop and corrupts memory behind
the end of msix_table.
This limits the number of vectors returned by ibm,change-msi to
the maximum supported by the actual device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: qemu-stable@nongnu.org
[agraf: squash in bugfix from aik]
Signed-off-by: Alexander Graf <agraf@suse.de>
In the past, IO space could not be mapped into the memory address space
so we introduced a workaround for that. Nowadays it does not look
necessary so we can remove the workaround and make sPAPR PCI
configuration simplier.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently it is UINT16_MAX*16 = 65536*16 = 1048560 which is not
a round number and therefore a bit confusing.
This defines MAX_NVRAM_SIZE precisely as 1MB.
Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
IRQ are lowered when ievent bit is cleared, so irq_pulse makes no sense
here...
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It's always one since commit fa510eb dropped the last drive_get_ref().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
"Init" and "uninit" suggest the functions don't allocate / free
storage. But they do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid using the GNU extesion ffsl which is not implemented in musl libc.
The atomic_xchg() means we know that vhost_log_chunk_t will never be
larger than the 'long' type, so ctzl() is always sufficient.
See also commit fbeadf50 (bitops: unify bitops_ffsl with the one in
host-utils.h, call it bitops_ctzl) on why ctzl should be used instead
of ffsl.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hello qemu-*@nongnu.org, this is my first contribution. apologies if
something is incorrect.
this patch fixes vmware_vga.c so that it actually returns the cursory
register when asked for, instead of cursorx.
Signed-off-by: Nicolas Owens <mischief@offblast.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
No need to wrap it with an if.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ne2000-isa device defines a VMState struct for migration, but
we forgot to actually register it. Correct this deficiency by
setting dc->vmsd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The functions softusb_read_pmem() and softusb_write_pmem() are unused;
remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function is_parallel_epp() is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The IRQ_testbit() function is never used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The stream_halted() function is never used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Drop the sd_acmd_type[] array: it is never used. (The equivalent
sd_cmd_type[] array for normal commands is used to identify
those commands whose argument includes the card address in the
top 16 bits; but for app commands the card address is passed
with the APP_CMD prefix, not with the argument to the app command
itself.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The variables parallel_io and parallel_irq are unused; delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a debug printf for TX descriptor fetching. This is helpful to anyone
needing to debug TX ring buffer traversal. It is also now consistent with
the RX code which has a similar printf.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The local variable "desc" was being used to read-modify-write the
first descriptor (of a multi-desc packet) upon packet completion.
desc however continues to be used by the code as the current
descriptor. Give this first desc RMW it's own local variable to
avoid trampling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Try to inject floating interrupts via the flic if it is available.
This allows us to inject the full range of floating interrupts.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Remove the need for a cpu to inject a floating interrupt on kvm.
Acked-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move the injection code for all floating interrupts to interrupt.c
and add a comment.
Also get rid of the #ifdef CONFIG_KVM for the service interrupt.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds live migration support for virtio-ccw devices.
It's not done with vmstate because virtio itself is not yet ported
to vmstate either.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we run with an old kernel that does not support KVM_CAP_IRQ_ROUTING,
we don't have to do anything in the ->register_io_adapter and
->io_adapter_map callbacks and therefore should return 0 instead of
-ENOSYS (just as the non-kvm flic does).
This fixes using adapter interrupts when running under an older kernel,
which broke with "s390x: add I/O adapter registration".
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We should not try to store the emw portion of the irb if extended
measurements are not applicable. In particular, we should not surprise
the guest by storing a larger irb if it did not enable extended
measurements.
Cc: qemu-stable@nongnu.org
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Right now to run firmware inside the QEMU VExpress model requires
padding out the firmware image to the size of the virtual flash and
passing it in via the -pflash argument. If the firmware image is passed
without padding, then QEMU will fail. Also, when passed as a -pflash
argument, QEMU treats the file as persistent storage and will modify the
file.
The -bios flag provides the semantics that we want for providing a
firmware image. This patch maps the contents of the -bios file into the
address space at the boot flash location.
Tested with the vexpress-a15 model and the Tianocore port.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Roy Franz <roy.franz@linaro.org>
[PMM: folded long line, removed stray \n from error message,
use correct variable for printing image name, exit(1) rather than 0]
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, e1000 support is based on the manual for the 8254xx
model series. 82573x models are documented in a separate manual
(see http://www.intel.com/content/dam/www/public/us/en/documents/manuals/pcie-gbe-controllers-open-source-manual.pdf)
and the 82573L device ID no longer works correctly on either Linux
(3.14.*) or Windows 7.
This patch removes stale code claiming to support 82573L, cleaning
up the code base for the remaining 8254xx model series.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow selection of different card models from the qemu
command line, to better accomodate a wider range of guests.
Signed-off-by: Romain Dolbeau <romain@dolbeau.org>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In vmxnet3_cleanup_msix(), there is called msix_vector_unuse() with
VMXNET3_MAX_INTRS. That is not correct since vector of
value VMXNET3_MAX_INTRS was never used. Also all the used vectors
are not un-used. So call vmxnet3_unuse_msix_vectors() instead which
does the correct job.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no CTRL_I bit in the pong buffer control register. The
CTRL_I bit from the ping buffer masks both ping and pong buffers.
Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTkeeSAAoJEJykq7OBq3PIi9sIAIKVSHE/c6Tc4rGcIgPoAXTS
li9FCQ/vXFUehIe6MFMmf6OX08zKxBw18DLS6mLyqAn5lJGUWQBXiP+nXqgzhy5T
EoCtwE/n5fpbQuCVxXm+CsaGZc4IySyZ4FiwqAe4MysYKXkJbDGEF/TEzL+0vFw4
wEHZUQ3ykydJtPLtZVI3MNRmqRtk7zbq8So6g/FYB3VyIeyhMp1peWahHPLXGOQ/
phpk5G4Yk6p8TtjTe6lo4ajBzAprsxc052Jz+MaxbuihzfHjf2i62iLixcDDTUzz
6n/sCVsvorA6O6SJ/sMtkQs1N1cXoj3tKSIu8gh6zkAtlg/V6sSRaLCnQQtFQB4=
=xvq7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 06 Jun 2014 17:08:50 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (42 commits)
qapi: Extract qapi/block.json definitions
qapi: Extract qapi/block-core.json definitions
qapi: create two block related json modules
qapi: Extract qapi/common.json definitions
sheepdog: reload only header in a case of live snapshot
sheepdog: fix vdi object update after live snapshot
rbd: Fix leaks in rbd_start_aio() error path
qemu-img: Document check exit codes
block: fix wrong order in live block migration setup
blockdev: acquire AioContext in block_set_io_throttle
throttle: add detach/attach test case
throttle: add throttle_detach/attach_aio_context()
dataplane: Support VIRTIO_BLK_T_SCSI_CMD
virtio-blk: Factor out virtio_blk_handle_scsi_req from virtio_blk_handle_scsi
virtio-blk: Allow config-wce in dataplane
block: Move declaration of bdrv_get_aio_context to block.h
raw-posix: drop raw_get_aio_fd() since it is no longer used
dataplane: implement async flush
dataplane: delete IOQueue since it is no longer used
dataplane: use the QEMU block layer for I/O
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SysBusDevice::init is depracated. Convert to Object::init
as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
SysBusDevice::init is depracated. Convert to Object::init and
Device::realize as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This refresh of the device state is intended to be a reset side
effect. Move it to a proper reset handler rather than do it at
init time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
SysBusDevice::init is depracated. Convert to Object::init and
Device::realize as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This zeroing-out of the rxbuf variable (ping pong state) is a reset
side effect. Extract into a proper reset.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
SysBusDevice::init is depracated. Convert to Object::init and
Device::realize as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* remotes/mcayland/qemu-sparc:
apb: implement IOMMU translation for PCI host bridge
apb: handle reading/writing of IOMMU control registers
apb: fix IOMMU register sizes
apb: Move IOMMU registers into a separate IOMMUState struct
tcx: move initialisation from realizefn to initfn
tcx: move initialisation from SysBusDevice class to TCX class realizefn
cg3: add extra check to prevent CG3 register array overflow
cg3: move initialisation from realizefn to initfn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTkJ2iAAoJECgfDbjSjVRpk4oIALf6RC/Bm3bVaX5TSgqdt8UT
4vCf10V53KkbfhxN9dGyPluswz/gyY7M/nrOoi0BSbrQndSavgyNRCfMfBfIw1FO
yvfeyrkBkKBP4ViF6uogcSr79h3vQaXsqZIGmZUsdv3ZfVrLS+7dKsigVI6PumNR
8YBveGljFjn0nrCC2+M2+LDefcPGSEu9vea9hKER0uPuz1mib8otjm1PAH30QeW/
9q1bwFEwobFJk32vrayQrwGk5ECXCCHR8LPV1Rv9tyZLEqAbdiNrwGb4MycztLvK
UHuvNFNqUHKNe/tqvp1RPmWOY2aO8+u0570kc8nhXXq2/tjJTOCmQfmodE6hh8A=
=bwmA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,qdev fixes, tests
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream:
qdev: Add test of qdev_prop_check_global
qdev: Display warning about unused -global
tests: add smbios testing
tests: rename acpi-test to bios-tables-test
virtio-balloon: return empty data when no stats are available
pcie_host: Turn pcie_host_init() into an instance_init
SMBIOS: Fix type 17 field sizes
SMBIOS: Update Type 0 struct generator for machines >= 2.1
SMBIOS: Fix endian-ness when populating multi-byte fields
serial-pci: Set prog interface field of pci config to 16550 compatible
Conflicts:
include/hw/i386/pc.h
[PMM: fixed trivial conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/softmmu-smap: (33 commits)
target-i386: cleanup x86_cpu_get_phys_page_debug
target-i386: fix protection bits in the TLB for SMEP
target-i386: support long addresses for 4MB pages (PSE-36)
target-i386: raise page fault for reserved bits in large pages
target-i386: unify reserved bits and NX bit check
target-i386: simplify pte/vaddr calculation
target-i386: raise page fault for reserved physical address bits
target-i386: test reserved PS bit on PML4Es
target-i386: set correct error code for reserved bit access
target-i386: introduce support for 1 GB pages
target-i386: introduce do_check_protect label
target-i386: tweak handling of PG_NX_MASK
target-i386: commonize checks for PAE and non-PAE
target-i386: commonize checks for 4MB and 4KB pages
target-i386: commonize checks for 2MB and 4KB pages
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
target-i386: fix kernel accesses with SMAP and CPL = 3
target-i386: move check_io helpers to seg_helper.c
target-i386: rename KSMAP to KNOSMAP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the registers are documented as being 64-bit, Linux seems to access
them in two halves as 2 x 32-bit accesses. Make sure that we can correctly
handle this case.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
According to the referenced documentation, the IOMMU has 3 64-bit registers
consisting of a control register, base register and flush register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is an intermediate step to bring TCX in line with CG3.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Andreas Färber <afaerber@suse.de>
The case statements in the CG3 read and write register routines have a maximum
value of CG3_REG_SIZE, so if a value were written to this offset then it
would overflow the register array.
Currently this cannot be exploited since the MemoryRegion restricts accesses
to the range 0 ... CG3_REG_SIZE - 1, but it seems worth clarifying this for
future review and/or static analysis.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Paolo Bonzini <pbonzini@redhat.com>
* remotes/kvm/uq/master:
kvm: Fix eax for cpuid leaf 0x40000000
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
kvm: Enable -cpu option to hide KVM
kvm: Ensure negative return value on kvm_init() error handling path
target-i386: set CC_OP to CC_OP_EFLAGS in cpu_load_eflags
target-i386: get CPL from SS.DPL
target-i386: rework CPL checks during task switch, preparing for next patch
target-i386: fix segment flags for SMM and VM86 mode
target-i386: Fix vm86 mode regression introduced in fd460606fd.
kvm_stat: allow choosing between tracepoints and old stats
kvmclock: Ensure time in migration never goes backward
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This can help a user understand why -global was ignored.
For example: with "-vga cirrus"; "-global vga.vgamem_mb=16" is just
ignored when "-global cirrus-vga.vgamem_mb=16" is not.
This is currently clear when the wrong property is provided:
out/x86_64-softmmu/qemu-system-x86_64 -global cirrus-vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
qemu-system-x86_64: Property '.vram_size_mb' not found
Aborted (core dumped)
vs
out/x86_64-softmmu/qemu-system-x86_64 -global vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
VNC server running on `::1:5900'
^Cqemu: terminating on signal 2
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexey Kardashevskiy