Use shared memory region for interrupt remapping which can be
aliased by all devices.
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Santosh Shukla <santosh.shukla@amd.com>
Message-Id: <20240927172913.121477-4-santosh.shukla@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce 'nodma' shared memory region to support PT mode
so that for each device, we only create an alias to shared memory
region when DMA-remapping is disabled.
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Santosh Shukla <santosh.shukla@amd.com>
Message-Id: <20240927172913.121477-3-santosh.shukla@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename the MMIO memory region variable 'mmio' to 'mr_mmio'
so to correctly name align with struct AMDVIState::variable type.
No functional change intended.
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Santosh Shukla <santosh.shukla@amd.com>
Message-Id: <20240927172913.121477-2-santosh.shukla@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add command to sync config from vhost-user backend to the device. It
may be helpful when VHOST_USER_SLAVE_CONFIG_CHANGE_MSG failed or not
triggered interrupt to the guest or just not available (not supported
by vhost-user server).
Command result is racy if allow it during migration. Let's not allow
that.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Raphael Norwitz <raphael@enfabrica.net>
Message-Id: <20240920094936.450987-4-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split vhost_user_blk_sync_config() out from
vhost_user_blk_handle_config_change(), to be reused in the following
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Raphael Norwitz <raphael@enfabrica.net>
Message-Id: <20240920094936.450987-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
To establish performance characteristics of a CXL device when used via a
particular CXL topology (root ports, switches, end points) it is necessary
to set the appropriate link speed and width in the PCI Express capability
structure. Provide x-speed and x-link properties for this.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To establish performance characteristics of a CXL device when used via a
particular CXL topology (root ports, switches, end points) it is necessary
to set the appropriate link speed and width in the PCI Express capability
structure. Provide x-speed and x-link properties for this.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst similar to existing PCIESlot link configuration a few registers
need to be set differently so that the downstream device presents
a 'configured' state that is then used to 'train' the upstream port
on the link. Basically that means setting the status register to
reflect it succeeding in training up to target settings.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst not all link related registers are common between RP / Switch DSP
and EP / Switch USP many of them are. Factor that group out to save
on duplication when adding EP / Swtich USP configurability.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Copied from gen_pcie_root_port.c
Drop the previous code that ensured a valid value in s->width, s->speed
as now a default is provided so this will always be set.
Note this changes the default settings but it is unlikely to have a negative
effect on software as will only affect ports with now downstream device.
All other ports will use the settings from that device.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Approach copied from gen_pcie_root_port.c
Previously the link defaulted to a maximum of 2.5GT/s and 1x. Enable setting
it's maximum values. The actual value after 'training' will depend on the
downstream device configuration.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916173518.1843023-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
>From review of the Generic Ports support.
These properties had no description set so add one.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916174321.1843228-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From review of generic port introduction.
The value is handled as a uint32_t so store it in that type.
The value cannot in reality exceed MAX_NODES which is currently
128 but if the types are matched there is no need to rely on that
restriction.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916174237.1843213-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are very similar to the recently added Generic Initiators
but instead of representing an initiator of memory traffic they
represent an edge point beyond which may lie either targets or
initiators. Here we add these ports such that they may
be targets of hmat_lb records to describe the latency and
bandwidth from host side initiators to the port. A discoverable
mechanism such as UEFI CDAT read from CXL devices and switches
is used to discover the remainder of the path, and the OS can build
up full latency and bandwidth numbers as need for work and data
placement decisions.
Acked-by: Markus Armbruster <armbru@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916174122.1843197-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reduce the direct use of PCI internals inside ACPI table creation.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than relying on PCI internals, use the new acpi_property
to obtain the ACPI _UID values. These are still the same
as the PCI Bus numbers so no functional change.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable ACPI table creation for PCI Expander Bridges to be independent
of PCI internals. Note that the UID is currently the PCI bus number.
This is motivated by the forthcoming ACPI Generic Port SRAT entries
which can be made completely independent of PCI internals.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst ACPI SRAT Generic Initiator Afinity Structures are able to refer to
both PCI and ACPI Device Handles, the QEMU implementation only implements
the PCI Device Handle case. For now move the code into the existing
hw/acpi/pci.c file and header. If support for ACPI Device Handles is
added in the future, perhaps this will be moved again.
Also push the struct AcpiGenericInitiator down into the c file as not
used outside pci.c.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using a property allows us to hide the internal details of the PCI device
from the code to build a SRAT Generic Initiator Affinity Structure with
PCI Device Handle.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor noted that this function only builds one instance, so was rather
misleadingly named. Fix that.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than attempting to create a generic function with mess of the two
different device handle types, use a PCI handle specific variant. If the
ACPI handle form is needed then that can be introduced alongside this
with little duplicated code.
Drop the PCIDeviceHandle in favor of just passing the bus, devfn
and segment directly. devfn kept as a single byte because ARI means
that in this case it is just an 8 bit function number.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20240618142333.102be976@imammedo.users.ipa.redhat.com/
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Before making additional modification, tidy up this misleading indentation.
Reviewed-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ordering in ACPI specification [1] has bus number in the lowest byte.
As ACPI tables are little endian this is the reverse of the ordering
used by PCI_BUILD_BDF(). As a minimal fix split the QEMU BDF up
into bus and devfn and write them as single bytes in the correct
order.
[1] ACPI Spec 6.3, Table 5.80
Fixes: 0a5b5acdf2 ("hw/acpi: Implement the SRAT GI affinity structure")
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240916171017.1841767-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
-----BEGIN PGP SIGNATURE-----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=rPaa
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DBG support adds three additional registers: tr_req_iova, tr_req_ctl and
tr_response.
The DBG cap is always enabled. No on/off toggle is provided for it.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add PCIe Address Translation Services (ATS) capabilities to the IOMMU.
This will add support for ATS translation requests in Fault/Event
queues, Page-request queue and IOATC invalidations.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU spec predicts that the IOMMU can use translation caches
to hold entries from the DDT. This includes implementation for all cache
commands that are marked as 'not implemented'.
There are some artifacts included in the cache that predicts s-stage and
g-stage elements, although we don't support it yet. We'll introduce them
next.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate device tree entry for riscv-iommu PCI device, along with
mapping all PCI device identifiers to the single IOMMU device instance.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU can be modelled as a PCIe device following the
guidelines of the RISC-V IOMMU spec, chapter 7.1, "Integrating an IOMMU
as a PCIe device".
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU specification is now ratified as-per the RISC-V
international process. The latest frozen specifcation can be found at:
https://github.com/riscv-non-isa/riscv-iommu/releases/download/v1.0/riscv-iommu.pdf
Add the foundation of the device emulation for RISC-V IOMMU. It includes
support for s-stage (sv32, sv39, sv48, sv57 caps) and g-stage (sv32x4,
sv39x4, sv48x4, sv57x4 caps).
Other capabilities like ATS and DBG support will be added incrementally
in the next patches.
Co-developed-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20241016204038.649340-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This header will be used by the RISC-V IOMMU emulation to be added
in the next patch. Due to its size it's being sent in separate for
an easier review.
One thing to notice is that this header can be replaced by the future
Linux RISC-V IOMMU driver header, which would become a linux-header we
would import instead of keeping our own. The Linux implementation isn't
upstream yet so for now we'll have to manage riscv-iommu-bits.h.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current approach of using qemu_chr_fe_write() and ignoring the
return values results in dropped characters [1].
Let's update the SiFive UART to use a async sifive_uart_xmit() function
to transmit the characters and apply back pressure to the guest with
the SIFIVE_UART_TXFIFO_FULL status.
This should avoid dropped characters and more realisticly model the
hardware.
1: https://gitlab.com/qemu-project/qemu/-/issues/2114
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910045419.1252277-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current approach of using qemu_chr_fe_write() and ignoring the
return values results in dropped characters [1]. Ideally we want to
report FIFO status to the guest, but the HTIF isn't a real UART, so we
don't really have a way to do that.
Instead let's just use qemu_chr_fe_write_all() so at least we don't drop
characters.
1: https://gitlab.com/qemu-project/qemu/-/issues/2114
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910045419.1252277-2-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The section 4.5.2 of the RISC-V AIA specification says that any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode.
If an interrupt is asserted before the driver configs its interrupt
type to APLIC, it's pending bit will not be set except a relevant
write to a setip or setipnum register. When we write the interrupt
type to sourcecfg register, if the APLIC device doesn't check
rectified input value and update the pending bit, this interrupt
might never becomes pending.
For APLIC.m, we can manully set pending by setip or setipnum
registers in driver. But for APLIC.w, the pending status totally
depends on the rectified input value, we can't control the pending
status via mmio registers. In this case, hw should check and update
pending status for us when writing sourcecfg registers.
Update QEMU emulation to handle "pre-existing" interrupts.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241004104649.13129-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to PLIC specification (chapter 5), there
is only one case, when interrupt is claimed. Fix
PLIC controller to match this behavior.
Signed-off-by: Sergey Makarov <s.makarov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240918140229.124329-3-s.makarov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to PLIC specification chapter 4, zeroth
priority register is reserved. Discard writes to
this register.
Signed-off-by: Sergey Makarov <s.makarov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240918140229.124329-2-s.makarov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RV32 OpenSBI need a fw_dynamic_info parameter with 32-bit fields instead
of target_ulong.
In RV64 QEMU, target_ulong is 64. So it is not right for booting RV32 OpenSBI.
We create a fw_dynmaic_info32 struct for this purpose.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We are currently lacking a declared maintainer for the sub-system so
while we look for one I'm merging after testing locally.
- convert some fprintfs to proper trace events
- move timers used by GL devices into GL structures
- handle virtio_gpu_virgl_init() failure better
- implement unrealize for GL devices
- use virgl version numbering to gate features
- support context-init feature
- don't require udmabuf for virgl only
- add virgl resource tracker
- allow command submission to be suspended
- handle resource blob commands
- dynamically handle capabilit sets
- add venus context support for passing vulkan
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcg0FsACgkQ+9DbCVqe
KkT86Qf/RtQuzIl+y60BeXdBLqjpLbS2WY3pk49068o+ZyUccNhMLzfL/Pd2Iz7t
nW/4kI0lkobsPeKGLJchJQzWgEbFTD3KvYz9r8Ywugoy6FquMUptkSHcH8ggKZwT
oJ0wT2jNS7UjgcJjnlQ8WaP/EH8qPI/0+e6W6RlcTE1sIxpJ6zHfMnHi4RUayGz7
P9JYbOrMO2bHWBrdfQXIJaUVSLvy44j9V4u6OCCLPfDvr5RwzPXFv1YmTRpW14Zu
P+iuxdUjRuhUQDMSKIbrzfHOFLg4iUchMgyd2pnVFjU6zOyA+yKWDxfPO0K0AbHh
FddMYgP5K7IrgaUc6mI0w2/RCuLJvw==
=mSAL
-----END PGP SIGNATURE-----
Merge tag 'pull-virtio-gpu-vulkan-291024-1' of https://gitlab.com/stsquad/qemu into staging
virtio-gpu: add venus/vulkan capability
We are currently lacking a declared maintainer for the sub-system so
while we look for one I'm merging after testing locally.
- convert some fprintfs to proper trace events
- move timers used by GL devices into GL structures
- handle virtio_gpu_virgl_init() failure better
- implement unrealize for GL devices
- use virgl version numbering to gate features
- support context-init feature
- don't require udmabuf for virgl only
- add virgl resource tracker
- allow command submission to be suspended
- handle resource blob commands
- dynamically handle capabilit sets
- add venus context support for passing vulkan
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcg0FsACgkQ+9DbCVqe
# KkT86Qf/RtQuzIl+y60BeXdBLqjpLbS2WY3pk49068o+ZyUccNhMLzfL/Pd2Iz7t
# nW/4kI0lkobsPeKGLJchJQzWgEbFTD3KvYz9r8Ywugoy6FquMUptkSHcH8ggKZwT
# oJ0wT2jNS7UjgcJjnlQ8WaP/EH8qPI/0+e6W6RlcTE1sIxpJ6zHfMnHi4RUayGz7
# P9JYbOrMO2bHWBrdfQXIJaUVSLvy44j9V4u6OCCLPfDvr5RwzPXFv1YmTRpW14Zu
# P+iuxdUjRuhUQDMSKIbrzfHOFLg4iUchMgyd2pnVFjU6zOyA+yKWDxfPO0K0AbHh
# FddMYgP5K7IrgaUc6mI0w2/RCuLJvw==
# =mSAL
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 29 Oct 2024 12:08:59 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-virtio-gpu-vulkan-291024-1' of https://gitlab.com/stsquad/qemu:
virtio-gpu: Support Venus context
virtio-gpu: Register capsets dynamically
virtio-gpu: Handle resource blob commands
virtio-gpu: Support suspension of commands processing
virtio-gpu: Add virgl resource management
virtio-gpu: Don't require udmabuf when blobs and virgl are enabled
virtio-gpu: Support context-init feature with virglrenderer
virtio-gpu: Use pkgconfig version to decide which virgl features are available
virtio-gpu: Unrealize GL device
virtio-gpu: Handle virtio_gpu_virgl_init() failure
virtio-gpu: Move print_stats timer to VirtIOGPUGL
virtio-gpu: Move fence_poll timer to VirtIOGPUGL
virtio-gpu: Use trace events for tracking number of in-flight fences
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The device control API was added in 2013, assume that it is present.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20241024113126.44343-1-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 1ab08790bb we did some refactoring of the SD card
implementation, which included a rearrangement of the sd_cmd_type_t
enum values. Unfortunately we didn't notice that this enum is not
used solely inside the SD card model itself, but is also used by the
OMAP MMC controller device. In the OMAP MMC controller, it is used
to implement the handling of the Type field of the MMC_CMD register,
so changing the enum values so that they no longer lined up with the
bit definitions for that register field broke the controller model.
The effect is that Linux fails to boot from an SD card on the "sx1"
machine.
Give omap-mmc its own enum which we can document as needing to match
the encoding used in this device's register, so it isn't sharing
sd_cmd_type_t with the SD card model any more. We can then move
sd_cmd_type_t's definition out of sd.h and into sd.c, which is the
only place that uses it.
Cc: qemu-stable@nongnu.org
Fixes: 1ab08790bb ("hw/sd/sdcard: Store command type in SDProto")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241017162755.710698-1-peter.maydell@linaro.org
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable
the capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
[gankulkarni: This patch is rework of commit b320e21c48
which broke TCG since it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM.]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Message-id: 20241008114302.4855-1-gankulkarni@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We computes indirections_len by adding 1 to indirection_table_mask, but
it may overflow indirection_table_mask is UINT16_MAX. Check if
indirection_table_mask is small enough before adding 1.
Fixes: 590790297c ("virtio-net: implement RSS configuration command")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Request Venus when initializing VirGL and if venus=true flag is set for
virtio-gpu-gl device.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-14-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
virtio_gpu_virgl_get_num_capsets will return "num_capsets", but we can't
assume that capset_index 1 is always VIRGL2 once we'll support more capsets,
like Venus and DRM capsets. Register capsets dynamically to avoid that problem.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-13-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Support BLOB resources creation, mapping, unmapping and set-scanout by
calling the new stable virglrenderer 0.10 interface. Only enabled when
available and via the blob config. E.g. -device virtio-vga-gl,blob=true
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com> # added set_scanout_blob
Signed-off-by: Xenia Ragiadakou <xenia.ragiadakou@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-12-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Check whether command processing has been finished; otherwise, stop
processing commands and retry the command again next time. This allows
us to support asynchronous execution of non-fenced commands needed for
unmapping host blobs safely.
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-11-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
In a preparation to adding host blobs support to virtio-gpu, add virgl
resource management that allows to retrieve resource based on its ID
and virgl resource wrapper on top of simple resource that will be contain
fields specific to virgl.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-10-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The udmabuf usage is mandatory when virgl is disabled and blobs feature
enabled in the Qemu machine configuration. If virgl and blobs are enabled,
then udmabuf requirement is optional. Since udmabuf isn't widely supported
by a popular Linux distros today, let's relax the udmabuf requirement for
blobs=on,virgl=on. Now, a full-featured virtio-gpu acceleration is
available to Qemu users without a need to have udmabuf available in the
system.
Reviewed-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-9-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suravee Suthikulpanit