the new field will be used by boards to get access to main
RAM memory region and will help to save boiler plate in
boards which often introduce a field or variable just for
this purpose.
Memory region will be equivalent to what currently used
memory_region_allocate_system_memory() is returning apart
from that it will come from hostmem backend.
Followup patches will incrementally switch boards to using
RAM from MachineState::ram.
Patch takes care of non-NUMA case and follow up patch will
initialize MachineState::ram for NUMA case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-5-imammedo@redhat.com>
Property will contain link to memory backend that will be
used for backing initial RAM.
Follow up commit will alias -mem-path and -mem-prealloc
CLI options into memory backend options to make memory
handling consistent (using only hostmem backend family
for guest RAM allocation).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-3-imammedo@redhat.com>
it has been deprecated since 4.0 by commit
cb79224b7 (deprecate -mem-path fallback to anonymous RAM)
Deprecation period ran out and it's time to remove it
so it won't get in a way of switching to using hostmem
backend for RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-2-imammedo@redhat.com>
The device tree blob returned by load_device_tree is malloced.
We should free it after cpu_physical_memory_write().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200218091154.21696-4-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The device tree blob returned by load_device_tree is malloced.
We should free it after cpu_physical_memory_write().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200218091154.21696-2-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Register 0x818 is documented as 'undefined', and register
0x82c is not documented. Refuse their access.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200218063355.18577-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only 24 bits of the PCIROR register are documented
(see pp. 37 of datasheet referenced in this file header).
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200218063355.18577-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a comment with the name of each register in the 0x800-0x8ff range.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200218063355.18577-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200214001303.12873-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to have an early exit path. Delay some initializations
before the variables are used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of emitting the trace event before each call to
draw_line(), call it once at draw_line() entrance.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix warnings reported by Clang static code analyzer:
CC hw/net/rocker/rocker.o
hw/net/rocker/rocker.c:213:9: warning: Value stored to 'tx_tso_mss' is never read
tx_tso_mss = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_MSS]);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/net/rocker/rocker.c:217:9: warning: Value stored to 'tx_tso_hdr_len' is never read
tx_tso_hdr_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/net/rocker/rocker.c:255:9: warning: Value stored to 'tx_l3_csum_off' is never read
tx_l3_csum_off += tx_tso_mss = tx_tso_hdr_len = 0;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: dc488f888
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200217101637.27558-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix warning reported by Clang static code analyzer:
CC hw/block/pflash_cfi02.o
hw/block/pflash_cfi02.c:311:5: warning: Value stored to 'ret' is never read
ret = -1;
^ ~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix warning reported by Clang static code analyzer:
hw/display/qxl.c:1634:14: warning: Value stored to 'orig_io_port' during its initialization is never read
uint32_t orig_io_port = io_port;
^~~~~~~~~~~~ ~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 8b818e059b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 74d71ea16b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 956a78118b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 6f16da53ff
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In a few places we report errno formatted as a negative integer.
This is not as user friendly as it can be. Use strerror() and/or
error_setg_errno() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <4949c3ecf1a32189b8a4b5eb4b0fd04c1122501d.1581674006.git.mprivozn@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
-----BEGIN PGP SIGNATURE-----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=D4dQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf2:
MAINTAINERS: Add maintainer entry for Goldfish RTC
riscv: virt: Use Goldfish RTC device
hw: rtc: Add Goldfish RTC device
riscv: Separate FPU register size from core register size in gdbstub [v2]
riscv/virt: Add syscon reboot and poweroff DT nodes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl5FX+IZHHBldGVyLm1h
eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kSGEACPhcIl+ChhXd6M9iJASiXn
txg1a5ww6I99G9z9PFEuCv6lHBBcmfux9slu03HPyot1ycimx62NfjrOF/d0wq2p
OEw5Zs1BA9NqT6/aaB4JMV0RxkODP9xT6kKGVyufNJK1JS81V098R1EcSmaX+22+
LTa/IvQF128uqGqRwh68oU2YQ4FyP+Ow5AvGZ0JzhyDrtPxLVC5hVBqXK6iZhddk
6o6CtMRYP6v50dq6njScoAa0DOYm+FL/cOATtlZCozt2uGqkmuYmy4zP5j5JeP3c
SCQZW8MnF3duG1tX4nsxFEJEljjB1JrEpllm1Nml9wXe7XrQQfFXrvXARq900Xax
+hY6xMmNx/WyijXXbm3W8GVfVfzcE+/kzNb3wRcbXK4T2AB2B7qT7ShDLD84NLo4
5l+asl2bjfArcp4JQSHZbe3ZG848+qb+XIoXU7CMOswmJvKnoaXD0xXeFe84Qgnl
n/bhNJPNskNcfXGhXdGjmoTRN8gEpappiimCc5nzajNuJiAFJ9mcstV+ZGMHwOui
2Y/FMm3JgtKK9ecO1p3DZHrN+rqe3/WE4LIr2v2OoEdp9mlsAsq6cO3tzxxuKKTz
pyLnCW3q6t+rYDxqw6gvYudINtCSrmEHncEOAoqPxxFmc3YDJ6P3TfmiTKX3bioo
jwBnZGEuPINW1MZvCdCWUQ==
=Mspo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200213' into staging
target-arm queue:
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
# gpg: Signature made Thu 13 Feb 2020 14:40:34 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200213: (46 commits)
target/arm: Implement ARMv8.1-VMID16 extension
hw/arm/raspi: Extract the cores count from the board revision
hw/arm/raspi: Use a unique raspi_machine_class_init() method
hw/arm/raspi: Extract the board model from the board revision
hw/arm/raspi: Set default RAM size to size encoded in board revision
hw/arm/raspi: Let class_init() directly call raspi_machine_init()
hw/arm/raspi: Make board_rev a field of RaspiMachineClass
hw/arm/raspi: Make machines children of abstract RaspiMachineClass
hw/arm/raspi: Trivial code movement
hw/arm/raspi: Extract the processor type from the board revision
hw/arm/raspi: Extract the RAM size from the board revision
hw/arm/raspi: Extract the version from the board revision
hw/arm/raspi: Correct the board descriptions
hw/arm/raspi: Use BCM2708 machine type with pre Device Tree kernels
hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
hw/arm: ast2600: Wire up EHCI controllers
hw/arm: ast2400/ast2500: Wire up EHCI controllers
target/arm: Enable ARMv8.2-UAO in -cpu max
target/arm: Implement UAO semantics
target/arm: Update MSR access to UAO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The count of ARM cores is encoded in the board revision. Add a
helper to extract the number of cores, and use it. This will be
helpful when we add the Raspi0/1 that have a single core.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-14-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message as suggested by Igor]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the exception of the ignore_memory_transaction_failures
flag set for the raspi2, both machine_class_init() methods
are now identical. Merge them to keep a unique method.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-13-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the model type. Add a helper
to extract the model, and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-12-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We added a helper to extract the RAM size from the board
revision, and made board_rev a field of RaspiMachineClass.
The class_init() can now use the helper to extract from the
board revision the board-specific amount of RAM.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-11-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
raspi_machine_init() access to board_rev via RaspiMachineClass.
raspi2_init() and raspi3_init() do nothing. Call raspi_machine_init
directly.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to have a common class_init(). The only value that
matters (and changes) is the board revision.
Pass the board_rev as class_data to class_init().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-9-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM'ify RaspiMachineState. Now machines inherit of RaspiMachineClass.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-8-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no point in creating the SoC object before allocating the RAM.
Move the call to keep all the SoC-related calls together.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the processor type. Add a helper
to extract the type, and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-6-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the amount of RAM. Add a helper
to extract the RAM size, and use it.
Since the amount of RAM is fixed (it is impossible to physically
modify to have more or less RAM), do not allow sizes different
than the one anounced by the manufacturer.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the board version. Add a helper
to extract the version, and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We hardcode the board revision as 0xa21041 for the raspi2, and
0xa02082 for the raspi3:
166 static void raspi_init(MachineState *machine, int version)
167 {
...
194 int board_rev = version == 3 ? 0xa02082 : 0xa21041;
These revision codes are for the 2B and 3B models, see:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
Correct the board description.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting without device tree, the Linux kernels uses the $R1
register to determine the machine type. The list of values is
registered at [1].
There are two entries for the Raspberry Pi:
- https://www.arm.linux.org.uk/developer/machines/list.php?mid=3138
name: MACH_TYPE_BCM2708
value: 0xc42 (3138)
status: Active, not mainlined
date: 15 Oct 2010
- https://www.arm.linux.org.uk/developer/machines/list.php?mid=4828
name: MACH_TYPE_BCM2835
value: 4828
status: Active, mainlined
date: 6 Dec 2013
QEMU always used the non-mainlined type MACH_TYPE_BCM2708.
The value 0xc43 is registered to 'MX51_GGC' (processor i.MX51), and
0xc44 to 'Western Digital Sharespace NAS' (processor Marvell 88F5182).
The Raspberry Pi foundation bootloader only sets the BCM2708 machine
type, see [2] or [3]:
133 9:
134 mov r0, #0
135 ldr r1, =3138 @ BCM2708 machine id
136 ldr r2, atags @ ATAGS
137 bx r4
U-Boot only uses MACH_TYPE_BCM2708 (see [4]):
25 /*
26 * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
27 * so 2708 has historically been used rather than a dedicated 2835 ID.
28 *
29 * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
30 * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
31 * rather than obtaining a valid ID:-/
32 *
33 * For the bcm2837, hopefully a machine type is not needed, since everything
34 * is DT.
35 */
While the definition MACH_BCM2709 with value 0xc43 was introduced in
a commit described "Add 2709 platform for Raspberry Pi 2" out of the
mainline Linux kernel, it does not seem used, and the platform is
introduced with Device Tree support anyway (see [5] and [6]).
Remove the unused values (0xc43 introduced in commit 1df7d1f930
"raspi: add raspberry pi 2 machine" and 0xc44 in commit bade58166f
"raspi: Raspberry Pi 3 support"), keeping only MACH_TYPE_BCM2708.
[1] https://www.arm.linux.org.uk/developer/machines/
[2] https://github.com/raspberrypi/tools/blob/920c7ed2e/armstubs/armstub7.S#L135
[3] https://github.com/raspberrypi/tools/blob/49719d554/armstubs/armstub7.S#L64
[4] https://gitlab.denx.de/u-boot/u-boot/blob/v2015.04/include/configs/rpi-common.h#L18
[5] https://github.com/raspberrypi/linux/commit/d9fac63adac#diff-6722037d79570df5b392a49e0e006573R526
[6] http://lists.infradead.org/pipermail/linux-rpi-kernel/2015-February/001268.html
Cc: Zoltán Baldaszti <bztemail@gmail.com>
Cc: Pekka Enberg <penberg@iki.fi>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Kshitij Soni <kshitij.soni@broadcom.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200208165645.15657-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize EHCI controllers on AST2600 using the existing
TYPE_PLATFORM_EHCI. After this change, booting ast2600-evb
into Linux successfully instantiates a USB interface after
the necessary changes are made to its devicetree files.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
ehci-platform 1e6a3000.usb: EHCI Host Controller
ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1e6a3000.usb: irq 25, io mem 0x1e6a3000
ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00
usb usb1: Manufacturer: Linux 5.5.0-09825-ga0802f2d0ef5-dirty ehci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-platform
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200207174548.9087-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize EHCI controllers on AST2400 and AST2500 using the existing
TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux
successfully instantiates a USB interface.
ehci-platform 1e6a3000.usb: EHCI Host Controller
ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000
ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200206183437.3979-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original code defines a named object for the resource template but
then returns the resource template object itself; the resulted output
is like below:
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
0x0000, // Granularity
0x0000, // Range Minimum
0x00FF, // Range Maximum
0x0000, // Translation Offset
0x0100, // Length
,, )
......
})
Return (ResourceTemplate ()
{
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
0x0000, // Granularity
0x0000, // Range Minimum
0x00FF, // Range Maximum
0x0000, // Translation Offset
0x0100, // Length
,, )
......
})
}
So the named object "RBUF" is actually useless. The more natural way
is to return RBUF instead, or simply drop RBUF definition.
Choose the latter one to simplify the code.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-7-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using _UID of 0 for all PCI interrupt link devices absolutely violates
the spec. Simply increase one by one.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-6-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The address field in each _PRT mapping package should be constructed
with high word for device# and low word for function#, so it is wrong
to use bus_no as the high word. The existing code adds a bunch useless
entries with device #s above 31. Enumerate all possible slots
(i.e. PCI_SLOT_MAX) instead.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-5-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ACPI spec, _ADR should be used for device on a bus that
has a standard enumeration algorithm, but not for device which is on
system bus and must be enumerated by OSPM. And it is not recommended
to contain both _HID and _ADR in a single device.
See ACPI 6.3, section 6.1, top of page 343:
A device object must contain either an _HID object or an _ADR object,
but should not contain both.
(https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf)
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-4-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sub device "RP0" under PCI0 in ACPI/DSDT does not contain any
method or property other than "_ADR", so it is safe to remove it.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200204014325.16279-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Documentation says for WDA '0: Assert WDOG output.' and for SRS
'0: Assert system reset signal.'.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-id: 20200207095409.11227-1-rka@sysgo.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only difference to hardware revision 4 is that the device doesn't
switch to VGA mode in case someone happens to touch a VGA register,
which should make things more robust in configurations with multiple
vga devices.
Swtiching back to VGA mode happens on reset, either full machine
reset or qxl device reset (QXL_IO_RESET ioport command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20200206074358.4274-1-kraxel@redhat.com
For usb2 bMaxPacketSize0 is "n", for usb3 it is "1 << n",
so it must be 9 not 64 ...
rom "Universal Serial Bus 3.1 Specification":
If the device is operating at Gen X speed, the bMaxPacketSize0
field shall be set to 09H indicating a 512-byte maximum packet.
An Enhanced SuperSpeed device shall not support any other maximum
packet sizes for the default control pipe (endpoint 0) control
endpoint.
We now announce a 512-byte maximum packet.
Fixes: 89a453d4a5 ("uas-uas: usb3 streams")
Reported-by: Benjamin David Lunt <fys@fysnet.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200117073716.31335-1-kraxel@redhat.com
We extend QEMU RISC-V virt machine by adding Goldfish RTC device
to it. This will allow Guest Linux to sync it's local date/time
with Host date/time via RTC device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch adds model for Google Goldfish virtual platform RTC device.
We will be adding Goldfish RTC device to the QEMU RISC-V virt machine
for providing real date-time to Guest Linux. The corresponding Linux
driver for Goldfish RTC device is already available in upstream Linux.
For now, VM migration support is available but untested for Goldfish RTC
device. It will be hardened in-future when we implement VM migration for
KVM RISC-V.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The SiFive test device found on virt machine can be used by
generic syscon reboot and poweroff drivers available in Linux
kernel.
This patch updates FDT generation in virt machine so that
Linux kernel can probe and use generic syscon drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
-----BEGIN PGP SIGNATURE-----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=oMrh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-02-08' into staging
9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
# gpg: Signature made Sat 08 Feb 2020 08:38:10 GMT
# gpg: using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg: aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/9p-next-2020-02-08:
MAINTAINERS: 9pfs: Add myself as reviewer
tests/virtio-9p: added readdir test
hw/9pfs/9p-synth: added directory for readdir test
9pfs: validate count sent by client with T_readdir
9pfs: require msize >= 4096
tests/virtio-9p: add terminating null in v9fs_string_read()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will provide the following virtual files by the 9pfs
synth driver:
- /ReadDirDir/ReadDirFile99
- /ReadDirDir/ReadDirFile98
...
- /ReadDirDir/ReadDirFile1
- /ReadDirDir/ReadDirFile0
This virtual directory and its virtual 100 files will be
used by the upcoming 9pfs readdir tests.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5408c28c8de25dd575b745cef63bf785305ccef2.1579567020.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
A good 9p client sends T_readdir with "count" parameter that's sufficiently
smaller than client's initially negotiated msize (maximum message size).
We perform a check for that though to avoid the server to be interrupted
with a "Failed to encode VirtFS reply type 41" transport error message by
bad clients. This count value constraint uses msize - 11, because 11 is the
header size of R_readdir.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3990d3891e8ae2074709b56449e96ab4b4b93b7d.1579567020.git.qemu_oss@crudebyte.com>
[groug: added comment ]
Signed-off-by: Greg Kurz <groug@kaod.org>
A client establishes a session by sending a Tversion request along with a
'msize' parameter which client uses to suggest server a maximum message
size ever to be used for communication (for both requests and replies)
between client and server during that session. If client suggests a 'msize'
smaller than 4096 then deny session by server immediately with an error
response (Rlerror for "9P2000.L" clients or Rerror for "9P2000.u" clients)
instead of replying with Rversion.
So far any msize submitted by client with Tversion was simply accepted by
server without any check. Introduction of some minimum msize makes sense,
because e.g. a msize < 7 would not allow any subsequent 9p operation at
all, because 7 is the size of the header section common by all 9p message
types.
A substantial higher value of 4096 was chosen though to prevent potential
issues with some message types. E.g. Rreadlink may yield up to a size of
PATH_MAX which is usually 4096, and like almost all 9p message types,
Rreadlink is not allowed to be truncated by the 9p protocol. This chosen
size also prevents a similar issue with Rreaddir responses (provided client
always sends adequate 'count' parameter with Treaddir), because even though
directory entries retrieval may be split up over several T/Rreaddir
messages; a Rreaddir response must not truncate individual directory entries
though. So msize should be large enough to return at least one directory
entry with the longest possible file name supported by host. Most file
systems support a max. file name length of 255. Largest known file name
lenght limit would be currently ReiserFS with max. 4032 bytes, which is
also covered by this min. msize value because 4032 + 35 < 4096.
Furthermore 4096 is already the minimum msize of the Linux kernel's 9pfs
client.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <8ceecb7fb9fdbeabbe55c04339349a36929fb8e3.1579567019.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Commit ed65fd1a27 ("virtio-blk: switch off scsi-passthrough by
default") changed the default value of the 'scsi' property of
virtio-blk, which is only available on Linux hosts. It also added
an unconditional compat entry for 2.4 or earlier machines.
Trying to set this property on a pre-2.5 machine on OSX, we get:
Unexpected error in object_property_find() at qom/object.c:1201:
qemu-system-x86_64: -device virtio-blk-pci,id=scsi0,drive=drive0: can't apply global virtio-blk-device.scsi=true: Property '.scsi' not found
Fix this error by marking the property optional.
Fixes: ed65fd1a27 ("virtio-blk: switch off scsi-passthrough by default")
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200207001404.1739-1-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is a memory leak when we call 'device_list_properties' with typename = stellaris-gptm. It's easy to reproduce as follow:
virsh qemu-monitor-command vm1 --pretty '{"execute": "device-list-properties", "arguments": {"typename": "stellaris-gptm"}}'
This patch delay timer_new in realize to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200205070659.22488-4-pannengyuan@huawei.com
Cc: qemu-arm@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a memory leak when we call 'device_list_properties' with typename = stm32f2xx_timer. It's easy to reproduce as follow:
virsh qemu-monitor-command vm1 --pretty '{"execute": "device-list-properties", "arguments": {"typename": "stm32f2xx_timer"}}'
This patch delay timer_new to fix this memleaks.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200205070659.22488-3-pannengyuan@huawei.com
Cc: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a memory leak when we call 'device_list_properties' with typename = armv7m_systick. It's easy to reproduce as follow:
virsh qemu-monitor-command vm1 --pretty '{"execute": "device-list-properties", "arguments": {"typename": "armv7m_systick"}}'
This patch delay timer_new to fix this memleaks.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-id: 20200205070659.22488-2-pannengyuan@huawei.com
Cc: qemu-arm@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TD (two dimensions) DMA mode did not work, because the xlen variable
has not been re-initialized before each additional ylen run through
in bcm2835_dma_update(). Fix it.
Signed-off-by: Rene Stange <rsta2@o2online.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In TD (two dimensions) DMA mode ylen has to be increased by one after
reading it from the TXFR_LEN register, because a value of zero has to
result in one run through of the ylen loop. This has been tested on a
real Raspberry Pi 3 Model B+. In the previous implementation the ylen
loop was not passed at all for a value of zero.
Signed-off-by: Rene Stange <rsta2@o2online.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IGD quirk code defines a separate device, the so-called
"vfio-pci-igd-lpc-bridge" which shows up as a user-creatable
device in all QEMU binaries that include the vfio code. This
is a little bit unfortunate for two reasons: First, this device
is completely useless in binaries like qemu-system-s390x.
Second we also would like to disable it in downstream RHEL
which currently requires some extra patches there since the
device does not have a proper Kconfig-style switch yet.
So it would be good if the device could be disabled more easily,
thus let's move the code to a separate file instead and introduce
a proper Kconfig switch for it which gets only enabled by default
if we also have CONFIG_PC_PCI enabled.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
QEMU currently crashes when the user tries to use the "vmmouse" on a
machine without vmport, e.g.:
$ x86_64-softmmu/qemu-system-x86_64 -machine microvm -device vmmouse
Segmentation fault (core dumped)
or:
$ x86_64-softmmu/qemu-system-x86_64 -device vmmouse -M pc,vmport=off
Segmentation fault (core dumped)
Let's avoid the crash by checking for the vmport device first.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20200129112954.4282-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While removing the bluetooth code some weeks ago, I had to leave the
hw/bt/Kconfig file around. Otherwise some of the builds would have been
broken since the generated dependency files tried to include it before
they were rebuilt. Meanwhile, all those dependency files should have
been updated, so we can remove the empty Kconfig file now, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200123064525.6935-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Nothing from "sysemu/cpus.h" is used by smbios.c, remove the include.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200109112504.32622-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The PARISC Lasi chipset emulation requires some of the common parallel
support and fails to build on a --without-default-devices:
LINK hppa-softmmu/qemu-system-hppa
/usr/bin/ld: hw/hppa/lasi.o: in function `lasi_init':
hw/hppa/lasi.c:324: undefined reference to `parallel_mm_init'
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:206: qemu-system-hppa] Error 1
Fixes: 376b851909
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200129192350.27143-1-philmd@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The i8042 PS/2 Controller should not be enabled by default. It has
to be selected by machines or chipsets (e.g. SuperIO chipsets).
Message-Id: <20200115113748.24757-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The define is only used in one other place. Move the code there
instead of keeping this xen-specific define in sysemu.h.
Message-Id: <20200121161747.10569-1-thuth@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch sets the default value of SPAPR_CAP_FWNMI_MCE
to SPAPR_CAP_ON for machine type 5.0.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Message-Id: <20200130184423.20519-8-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch includes migration support for machine check
handling. Especially this patch blocks VM migration
requests until the machine check error handling is
complete as these errors are specific to the source
hardware and is irrelevant on the target hardware.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[Do not set FWNMI cap in post_load, now its done in .apply hook]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Message-Id: <20200130184423.20519-7-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds support in QEMU to handle "ibm,nmi-register"
and "ibm,nmi-interlock" RTAS calls.
The machine check notification address is saved when the
OS issues "ibm,nmi-register" RTAS call.
This patch also handles the case when multiple processors
experience machine check at or about the same time by
handling "ibm,nmi-interlock" call. In such cases, as per
PAPR, subsequent processors serialize waiting for the first
processor to issue the "ibm,nmi-interlock" call. The second
processor that also received a machine check error waits
till the first processor is done reading the error log.
The first processor issues "ibm,nmi-interlock" call
when the error log is consumed.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[Register fwnmi RTAS calls in core_rtas_register_types()
where other RTAS calls are registered]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Message-Id: <20200130184423.20519-6-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Upon a machine check exception (MCE) in a guest address space,
KVM causes a guest exit to enable QEMU to build and pass the
error to the guest in the PAPR defined rtas error log format.
This patch builds the rtas error log, copies it to the rtas_addr
and then invokes the guest registered machine check handler. The
handler in the guest takes suitable action(s) depending on the type
and criticality of the error. For example, if an error is
unrecoverable memory corruption in an application inside the
guest, then the guest kernel sends a SIGBUS to the application.
For recoverable errors, the guest performs recovery actions and
logs the error.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[Assume SLOF has allocated enough room for rtas error log]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200130184423.20519-5-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Memory error such as bit flips that cannot be corrected
by hardware are passed on to the kernel for handling.
If the memory address in error belongs to guest then
the guest kernel is responsible for taking suitable action.
Patch [1] enhances KVM to exit guest with exit reason
set to KVM_EXIT_NMI in such cases. This patch handles
KVM_EXIT_NMI exit.
[1] https://www.spinics.net/lists/kvm-ppc/msg12637.html
(e20bbd3d and related commits)
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200130184423.20519-4-ganeshgr@linux.ibm.com>
[dwg: #ifdefs to fix compile for 32-bit target]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce fwnmi an spapr capability and add a helper function
which tries to enable it, which would be used by following patch
of the series. This patch by itself does not change the existing
behavior.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[eliminate cap_ppc_fwnmi, add fwnmi cap to migration state
and reprhase the commit message]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200130184423.20519-3-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For POWER9 DD2.2 cpus, the best current Spectre v2 indirect branch
mitigation is "count cache disabled", which is configured with:
-machine cap-ibs=fixed-ccd
However, this option isn't available on DD2.3 CPUs with KVM, because they
don't have the count cache disabled.
For POWER9 DD2.3 cpus, it is "count cache flush with assist", configured
with:
-machine cap-ibs=workaround,cap-ccf-assist=on
However this option isn't available on DD2.2 CPUs with KVM, because they
don't have the special CCF assist instruction this relies on.
On current machine types, we default to "count cache flush w/o assist",
that is:
-machine cap-ibs=workaround,cap-ccf-assist=off
This runs, with mitigation on both DD2.2 and DD2.3 host cpus, but has a
fairly significant performance impact.
It turns out we can do better. The special instruction that CCF assist
uses to trigger a count cache flush is a no-op on earlier CPUs, rather than
trapping or causing other badness. It doesn't, of itself, implement the
mitigation, but *if* we have count-cache-disabled, then the count cache
flush is unnecessary, and so using the count cache flush mitigation is
harmless.
Therefore for the new pseries-5.0 machine type, enable cap-ccf-assist by
default. Along with that, suppress throwing an error if cap-ccf-assist
is selected but KVM doesn't support it, as long as KVM *is* giving us
count-cache-disabled. To allow TCG to work out of the box, even though it
doesn't implement the ccf flush assist, downgrade the error in that case to
a warning. This matches several Spectre mitigations where we allow TCG
to operate for debugging, since we don't really make guarantees about TCG
security properties anyway.
While we're there, make the TCG warning for this case match that for other
mitigations.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
The PowerNV machine emulates an OpenPOWER system and the PowerNV chip
devices are models of the internal logic of the POWER processor. They
can not be instantiated by the user on the QEMU command line.
The PHB3/PHB4 devices could be an exception in the future after some
rework on how the device tree is built. For the moment, exclude them
also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200129113720.7404-1-clg@kaod.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a model of the PCIe Host Bridge (PHB3) found on a POWER8
processor. It includes the PowerBus logic interface (PBCQ), IOMMU
support, a single PCIe Gen.3 Root Complex, and support for MSI and LSI
interrupt sources as found on a POWER8 system using the XICS interrupt
controller.
The POWER8 processor comes in different flavors: Venice, Murano,
Naple, each having a different number of PHBs. To make things simpler,
the models provides 3 PHB3 per chip. Some platforms, like the
Firestone, can also couple PHBs on the first chip to provide more
bandwidth but this is too specific to model in QEMU.
XICS requires some adjustment to support the PHB3 MSI. The changes are
provided here but they could be decoupled in prereq patches.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-3-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.
POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,
* PEC0 provides 1 PHB (PHB0)
* PEC1 provides 2 PHBs (PHB1 and PHB2)
* PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)
Each PEC has a set "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.
No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :
-device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
-netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
-device megasas,id=scsi0,bus=pcie.1,addr=0x0
-drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
If more are needed, include a bridge.
Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.
This model is not ready for hotplug yet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
- commit log
- fix for broken LSI support
- PHB pic printinfo
- large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-6-stefanb@linux.ibm.com>
[dwg: Use default in Kconfig rather than select to avoid breaking
Windows host build]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the tpm_spapr frontend with VM suspend and resume support.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-Id: <20200121152935.649898-5-stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement support for TPM on ppc64 by implementing the vTPM CRQ interface
as a frontend. It can use the tpm_emulator driver backend with the external
swtpm.
The Linux vTPM driver for ppc64 works with this emulation.
This TPM emulator also handles the TPM 2 case.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com>
[dwg: Use device_class_set_props(), tweak Kconfig]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For devices that cannot be statically initialized, implement a
get_dt_compatible() callback that allows us to ask the device for
the 'compatible' value.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-3-stefanb@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-2-stefanb@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When the "hb-mode" option is activated on the powernv machine, the
firmware is mapped at 0x8000000 and the HRMOR of the HW threads are
set to the same address.
The PNOR mapping on the FW address space of the LPC bus is left enabled
to let the firmware load any other images required to boot the host.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144154.10170-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 158e17a65e ("ppc/pnv: Link "chip" property to PnvCore::chip
pointer") introduced some cleanups of the PnvCore realize handler.
Let's continue by reworking a bit the interface of the PnvCore
handlers for the CPU threads. These changes make the "core-pir"
property alias unused. Remove it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144154.10170-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the description of "ibm,client-architecture-support" that
can found in LoPAPR "B.6.2.3 Root Node Methods":
If multiple partition processors or threads are active at the time of
the ibm,client-architecture-support method call, or an error is detected
in the format of the ibm,architecture.vec structure, the err? boolean
shall be TRUE; else FALSE.
We certainly don't want to temper with the platform or with the PCR of
the other vCPUs if they happen to be active. Ensure we have only one
active vCPU and fail CAS otherwise. This is just for conformance and
robustness, it doesn't fix any known bugs.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157969867170.571404.12117797348882189656.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Most of the option vector helpers have assertions to check their
arguments aren't null. The guest can provide an arbitrary address
for the CAS structure that would result in such null arguments.
Fail CAS with H_PARAMETER and print a warning instead of aborting
QEMU.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <157925255250.397143.10855183619366882459.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1579100861-73692-71-git-send-email-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Print out the offset at which the error occured.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200108090348.21224-3-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200108090348.21224-2-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The preferred way to test whether a trace event is enabled is to
use trace_event_get_state_backends(), because this will give the
correct answer (allowing expensive computations to be skipped)
whether the trace event is compile-time or run-time disabled.
Convert the old-style direct use of TRACE_FOO_ENABLED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200120151142.18954-4-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-4-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
kvm-no-adjvtime is a KVM specific CPU property and a first of its
kind. To accommodate it we also add kvm_arm_add_vcpu_properties()
and a KVM specific CPU properties description to the CPU features
document.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-7-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-3-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If LPIs are disabled, KVM will just ignore the GICR_PENDBASER.PTZ bit when
restoring GICR_CTLR. Setting PTZ here makes littlt sense in "reduce GIC
initialization time".
And what's worse, PTZ is generally programmed by guest to indicate to the
Redistributor whether the LPI Pending table is zero when enabling LPIs.
If migration is triggered when the PTZ has just been cleared by guest (and
before enabling LPIs), we will see PTZ==1 on the destination side, which
is not as expected. Let's just drop this hackish userspace behavior.
Also take this chance to refine the comment a bit.
Fixes: 367b9f527b ("hw/intc/arm_gicv3_kvm: Implement get/put functions")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20200119133051.642-1-yuzenghui@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace deprecated qdev_reset_all by resettable_cold_reset_fn for
the ipl registration in the main reset handlers.
This does not impact the behavior for the following reasons:
+ at this point resettable just call the old reset methods of devices
and buses in the same order than qdev/qbus.
+ resettable handlers registered with qemu_register_reset are
serialized; there is no interleaving.
+ eventual explicit calls to legacy reset API (device_reset or
qdev/qbus_reset) inside this reset handler will not be masked out
by resettable mechanism; they do not go through resettable api.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200123132823.1117486-12-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Deprecate device_legacy_reset(), qdev_reset_all() and
qbus_reset_all() to be replaced by new functions
device_cold_reset() and bus_cold_reset() which uses resettable API.
Also introduce resettable_cold_reset_fn() which may be used as a
replacement for qdev_reset_all_fn and qbus_reset_all_fn().
Following patches will be needed to look at legacy reset call sites
and switch to resettable api. The legacy functions will be removed
when unused.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-9-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit make use of the resettable API to reset the device being
hotplugged when it is realized. Also it ensures it is put in a reset
state coherent with the parent it is plugged into.
Note that there is a difference in the reset. Instead of resetting
only the hotplugged device, we reset also its subtree (switch to
resettable API). This is not expected to be a problem because
sub-buses are just realized too. If a hotplugged device has any
sub-buses it is logical to reset them too at this point.
The recently added should_be_hidden and PCI's partially_hotplugged
mechanisms do not interfere with realize operation:
+ In the should_be_hidden use case, device creation is
delayed.
+ The partially_hotplugged mechanism prevents a device to be
unplugged and unrealized from qdev POV and unrealized.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In qdev_set_parent_bus(), when changing the parent bus of a
realized device, if the source and destination buses are not in the
same reset state, some adaptations are required. This patch adds
needed call to resettable_change_parent() to make sure a device reset
state stays coherent with its parent bus.
The addition is a no-op if:
1. the device being parented is not realized.
2. the device is realized, but both buses are not under reset.
Case 2 means that as long as qdev_set_parent_bus() is called
during the machine realization procedure (which is before the
machine reset so nothing is in reset), it is a no op.
There are 52 call sites of qdev_set_parent_bus(). All but one fall
into the no-op case:
+ 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/
{vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device
parent bus just before realizing the same vdev(vgpu).
+ hw/core/qdev.c: when creating a device in qdev_try_create()
+ hw/core/sysbus.c: when initializing a device in the sysbus
+ hw/i386/amd_iommu.c: before realizing AMDVIState/pci
+ hw/isa/piix4.c: before realizing PIIX4State/rtc
+ hw/misc/auxbus.c: when creating an AUXBus
+ hw/misc/auxbus.c: when creating an AUXBus child
+ hw/misc/macio/macio.c: when initializing a MACIOState child
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda
+ hw/net/virtio-net.c: Used for migration when using the failover
mechanism to migration a vfio-pci/net. It is
a no-op because at this point the device is
already on the bus.
+ hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root
+ hw/pci-host/gpex.c: before realizing GPEXHost/root
+ hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev
+ hw/pci-host/q35.c: before realizing Q35PCIHost/mch
+ hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev
+ hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root
+ hw/s390x/event-facility.c: when creating SCLPEventFacility/
TYPE_SCLP_QUIESCE
+ hw/s390x/event-facility.c: ditto with SCLPEventFacility/
TYPE_SCLP_CPU_HOTPLUG
+ hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice
just after realizing it. Ok because at this point the destination
bus (sysbus) is not in reset; the realize step is before the
machine reset.
+ hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below.
+ hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs
line in ssi_auto_connect_slave(). Ok because this function is only
used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c,
hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c.
+ hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device
+ qdev-monitor.c: in device hotplug creation procedure before realize
Note that this commit alone will have no effect, right now there is no
use of resettable API to reset anything. So a bus will never be tagged
as in-reset by this same API.
The one place where side-effect will occurs is in hw/sd/core.c in
sdbus_reparent_card(). This function is only used in the raspi machines,
including during the sysbus reset procedure. This case will be
carrefully handled when doing the multiple phase reset transition.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a function resettable_change_parent() to do the required
plumbing when changing the parent a of Resettable object.
We need to make sure that the reset state of the object remains
coherent with the reset state of the new parent.
We make the 2 following hypothesis:
+ when an object is put in a parent under reset, the object goes in
reset.
+ when an object is removed from a parent under reset, the object
leaves reset.
The added function avoids any glitch if both old and new parent are
already in reset.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds support of Resettable interface to buses and devices:
+ ResettableState structure is added in the Bus/Device state
+ Resettable methods are implemented.
+ device/bus_is_in_reset function defined
This commit allows to transition the objects to the new
multi-phase interface without changing the reset behavior at all.
Object single reset method can be split into the 3 different phases
but the 3 phases are still executed in a row for a given object.
From the qdev/qbus reset api point of view, nothing is changed.
qdev_reset_all() and qbus_reset_all() are not modified as well as
device_legacy_reset().
Transition of an object must be done from parent class to child class.
Care has been taken to allow the transition of a parent class
without requiring the child classes to be transitioned at the same
time. Note that SysBus and SysBusDevice class do not need any transition
because they do not override the legacy reset method.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit defines an interface allowing multi-phase reset. This aims
to solve a problem of the actual single-phase reset (built in
DeviceClass and BusClass): reset behavior is dependent on the order
in which reset handlers are called. In particular doing external
side-effect (like setting an qemu_irq) is problematic because receiving
object may not be reset yet.
The Resettable interface divides the reset in 3 well defined phases.
To reset an object tree, all 1st phases are executed then all 2nd then
all 3rd. See the comments in include/hw/resettable.h for a more complete
description. The interface defines 3 phases to let the future
possibility of holding an object into reset for some time.
The qdev/qbus reset in DeviceClass and BusClass will be modified in
following commits to use this interface. A mechanism is provided
to allow executing a transitional reset handler in place of the 2nd
phase which is executed in children-then-parent order inside a tree.
This will allow to transition devices and buses smoothly while
keeping the exact current qdev/qbus reset behavior for now.
Documentation will be added in a following commit.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds trace events to reset procedure and when updating the parent
bus of a device.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a temporary device_legacy_reset function doing what
device_reset does to prepare for the transition with Resettable
API.
All occurrence of device_reset in the code tree are also replaced
by device_legacy_reset.
The new resettable API has different prototype and semantics
(resetting child buses as well as the specified device). Subsequent
commits will make the changeover for each call site individually; once
that is complete device_legacy_reset() will be removed.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we enabled parallel TCG code generation for softmmu (see
commit 3468b59 "tcg: enable multiple TCG contexts in softmmu")
and its subsequent fix (commit 72649619 "add .min_cpus and
.default_cpus fields to machine_class"), the raspi machines are
restricted to always use their 4 cores:
See in hw/arm/raspi2 (with BCM283X_NCPUS set to 4):
222 static void raspi2_machine_init(MachineClass *mc)
223 {
224 mc->desc = "Raspberry Pi 2";
230 mc->max_cpus = BCM283X_NCPUS;
231 mc->min_cpus = BCM283X_NCPUS;
232 mc->default_cpus = BCM283X_NCPUS;
235 };
236 DEFINE_MACHINE("raspi2", raspi2_machine_init)
We can no longer use the -smp option, as we get:
$ qemu-system-arm -M raspi2 -smp 1
qemu-system-arm: Invalid SMP CPUs 1. The min CPUs supported by machine 'raspi2' is 4
Since we can not set the TYPE_BCM283x SOC "enabled-cpus" with -smp,
remove the unuseful code.
We can achieve the same by using the '-global bcm2836.enabled-cpus=1'
option.
Reported-by: Laurent Bonnans <laurent.bonnans@here.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200120235159.18510-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following the pattern of the work recently done with the ASPEED GPIO
model, this adds support for inspecting and modifying the PCA9552 LEDs
from the monitor.
(qemu) qom-set /machine/unattached/device[17] led0 on
(qemu) qom-set /machine/unattached/device[17] led0 off
(qemu) qom-set /machine/unattached/device[17] led0 pwm0
(qemu) qom-set /machine/unattached/device[17] led0 pwm1
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-6-clg@kaod.org
[clg: - removed the "qom-get" examples from the commit log
- merged memory leak fixes from Joel ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The overhead for the OpenBMC firmware images using the a custom U-Boot
is around 2 seconds, which is fine, but with a U-Boot from mainline,
it takes an extra 50 seconds or so to reach Linux. A quick survey on
the number of reads performed on the flash memory region gives the
following figures :
OpenBMC U-Boot 922478 (~ 3.5 MBytes)
Mainline U-Boot 20569977 (~ 80 MBytes)
QEMU must be trashing the TCG TBs and reloading text very often. Some
addresses are read more than 250.000 times. Until we find a solution
to improve boot time, execution from MMIO is not activated by default.
Setting this option also breaks migration compatibility.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200114103433.30534-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These buffers should be aligned on 16 bytes.
Ignore invalid RX and TX buffer addresses and log an error. All
incoming and outgoing traffic will be dropped because no valid RX or
TX descriptors will be available.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-4-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialise another SDHCI model instance for the AST2600's eMMC
controller and use the SDHCI's num_slots value introduced previously to
determine whether we should create an SD card instance for the new slot.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-3-clg@kaod.org
[ clg : - removed ternary operator from sdhci_attach_drive()
- renamed SDHCI objects with a '-controller' prefix ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AST2600 includes a second cut-down version of the SD/MMC controller
found in the AST2500, named the eMMC controller. It's cut down in the
sense that it only supports one slot rather than two, but it brings the
total number of slots supported by the AST2600 to three.
The existing code assumed that the SD controller always provided two
slots. Rework the SDHCI object to expose the number of slots as a
property to be set by the SoC configuration.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-2-clg@kaod.org
[PMM: fixed up to use device_class_set_props()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The num-lines property of the TYPE_OR_GATE device sets the number
of input lines it has. An assert() in or_irq_realize() restricts
this to the maximum supported by the implementation. However we
got the condition in the assert wrong: it should be using <=,
because num-lines == MAX_OR_LINES is permitted, and means that
all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array
are used.
We didn't notice this previously because no user has so far
needed that many input lines.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200120142235.10432-1-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl4xgjEACgkQda1lgCoL
QhEmhggA4f2WVC23ub14UHFIqjkfWWDBZ2o+TxttuTNk8aAgSC0lLiPTUgDqB9oC
MINP8rXWB10xTzDPTAgi/C1eWBU0J9YUwGQFCXKTs/wYI2MT7ZVEQxV5kHBJ9Ygg
CjLIjMtDtzY6+gjtxzO1r9o3R+dEgi/ztk9p/EDCBfbERtyE2xqsL/rbhDeM0O2e
h5RVTqharUfvGEmSDWaorTMLcsbNJbx9bYC1PbJ3S9TBnDW6UHcTQ6PL7Rs39dU6
4n9VfE6KtfOwKf+plB8cZlerA9M0HoohsPoRhKPQkMhj1SbxD4jO1zyOuahxGJzY
xjmuJfPtFDTeFntpLNy7t66JYsPItw==
=4iNk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-01-29-1' into staging
Merge tpm 2020/01/29 v1
# gpg: Signature made Wed 29 Jan 2020 13:01:37 GMT
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-01-29-1:
tpm-ppi: page-align PPI RAM
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and, with this patch,
this is enabled by reading the field 'e_flags' of the ELF header of
the executable in question. The change expands functionality of
the following functions:
- load_elf()
- load_elf_as()
- load_elf_ram()
- load_elf_ram_sym()
The argument added to these functions is called 'pflags' and is of
type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word'
being the type of the field 'e_flags', in both 32-bit and 64-bit
variants of ELF header). Callers are allowed to pass NULL as that
argument, and in such case no lookup to the field 'e_flags' will
happen, and no information will be returned, of course.
CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
CC: Michael Walle <michael@walle.cc>
CC: Thomas Huth <huth@tuxfamily.org>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
CC: Aurelien Jarno <aurelien@aurel32.net>
CC: Jia Liu <proljc@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: BALATON Zoltan <balaton@eik.bme.hu>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
CC: Fabien Chouteau <chouteau@adacore.com>
CC: KONRAD Frederic <frederic.konrad@adacore.com>
CC: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
post-copy migration fails on destination with error such as:
2019-12-26T10:22:44.714644Z qemu-kvm: ram_block_discard_range:
Unaligned start address: 0x559d2afae9a0
Use qemu_memalign() to constrain the PPI RAM memory alignment.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200103074000.1006389-3-marcandre.lureau@redhat.com
The commit a718978ed5 from July 2015 introduced the assertion which
implies that the size of successful DMA transfers handled in ide_dma_cb()
should be multiple of 512 (the size of a sector). But guest systems can
initiate DMA transfers that don't fit this requirement.
For fixing that let's check the number of bytes prepared for the transfer
by the prepare_buf() handler. The code in ide_dma_cb() must behave
according to the Programming Interface for Bus Master IDE Controller
(Revision 1.0 5/16/94):
1. If PRDs specified a smaller size than the IDE transfer
size, then the Interrupt and Active bits in the Controller
status register are not set (Error Condition).
2. If the size of the physical memory regions was equal to
the IDE device transfer size, the Interrupt bit in the
Controller status register is set to 1, Active bit is set to 0.
3. If PRDs specified a larger size than the IDE transfer size,
the Interrupt and Active bits in the Controller status register
are both set to 1.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20191223175117.508990-2-alex.popov@linux.com
Signed-off-by: John Snow <jsnow@redhat.com>
The region in range [0xf0000000 - 0xf1000000] is the PDC area
(Processor Dependent Code), where the firmware is loaded.
This region has higher priority than the main memory.
When the machine has more than 3840MB of RAM, there is an
overlap. Since the PDC is closer to the CPU in the bus
hierarchy, it gets accessed first, and the CPU does not have
access to the RAM in this range.
To model the same behavior and keep a simple memory layout,
reduce the priority of the RAM region. The PDC region ends
overlapping the RAM.
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200109000525.24744-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hardware expects DIMM slots of 1 or 2 GB, allowing up to
4 GB of memory. We want to accept the same amount of memory the
hardware can deal with. DIMMs of 768MB are not available.
However we have to deal with a firmware limitation: currently
SeaBIOS only supports 32-bit, and expects the RAM size in a
32-bit register. When using a 4GB configuration, the 32-bit
register get truncated and we report a size of 0MB to SeaBIOS,
which ends halting the machine:
$ qemu-system-hppa -m 4g -serial stdio
SeaBIOS: Machine configured with too little memory (0 MB), minimum is 16 MB.
SeaBIOS wants SYSTEM HALT.
The easiest way is to restrict the machine to 3GB of memory.
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200109000525.24744-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The firmware has to reside in the PDC range. If the Elf file
expects to load it below FIRMWARE_START, it is incorrect,
regardless the RAM size.
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200109000525.24744-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.
Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most HP PA-RISC machines have a Digital DS21142/43 Tulip network card,
only some very latest generation machines have an e1000 NIC.
Since qemu now provides an emulated tulip card, use that one instead.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20191221222530.GB27803@ls3530.fritz.box>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-5-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
HP-UX sends both the 'Set key make and break (0xfc) and
'Set all key typematic make and break' (0xfa). QEMU response
with 'Resend' as it doesn't handle these commands. HP-UX than
reports an PS/2 max retransmission exceeded error. Add these
commands and just reply with ACK.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-4-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
LASI is a built-in multi-I/O chip which supports serial, parallel,
network (Intel i82596 Apricot), sound and other functionalities.
LASI has been used in many HP PARISC machines.
This patch adds the necessary parts to allow Linux and HP-UX to detect
LASI and the network card.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-3-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The tests of the dino chip with the Online-diagnostics CD
("ODE DINOTEST") now succeeds.
Additionally add some qemu trace events.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191220211512.3289-2-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While working on the "Enable adapter interruption suppression again"
recently, I had to discover that the meaning of get_machine_class()
and the related *_allowed() wrappers is not very obvious. Add a more
verbose comment here to clarify how these should be used.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200123170256.12386-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We currently check (by error) if the passed-in Error pointer errp
is non-null and return after realizing the first child of the
event facility in that case. Symptom is that 'virsh shutdown'
does not work, as the sclpquiesce device is not realized.
Fix this by (correctly) checking the local Error err.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 3d508334dd ("s390x/event-facility: Fix realize() error API violations")
Message-Id: <20200121095506.8537-1-cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the kernel irqchip has been disabled, we don't want the
{add,release}_adapter_routes routines to call any kvm_irqchip_*
interfaces, as they may rely on an irqchip actually having been
created. Just take a quick exit in that case instead. If you are
trying to use irqfd without a kernel irqchip, we will fail with
an error.
Also initialize routes->gsi[] with -1 in the virtio-ccw handling,
to make sure we don't trip over other errors, either. (Nobody
else uses the gsi array in that structure.)
Fixes: d426d9fba8 ("s390x/virtio-ccw: wire up irq routing and irqfds")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200117111147.5006-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
'out' label from write_event_mask() and write_event_data()
can be replaced by 'return'.
The 'out' label from read_event_data() can also be replaced.
However, as suggested by Cornelia Huck, instead of simply
replacing the 'out' label, let's also change the code flow
a bit to make it clearer that sccb events are always handled
regardless of the mask for unconditional reads, while selective
reads are handled if the mask is valid.
CC: Cornelia Huck <cohuck@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Halil Pasic <pasic@linux.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200108144607.878862-1-danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
'out' label can be replaced by 'return' with the appropriate
value that is set by 'r' right before the jump.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200106182425.20312-42-danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
'out' label can be replaced by 'return' with the appropriate
value. The 'r' integer, which is used solely to set the
return value for this label, can also be removed.
CC: Cornelia Huck <cohuck@redhat.com>
CC: Halil Pasic <pasic@linux.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200106182425.20312-39-danielhb413@gmail.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use class properties facilities to add properties to the class during
device_class_set_props().
qdev_property_add_static() must be adapted as PropertyInfo now
operates with classes (and not instances), so we must
set_default_value() on the ObjectProperty, before calling its init()
method on the object instance.
Also, PropertyInfo.create() is now exclusively used for class
properties. Fortunately, qdev_property_add_static() is only used in
target/arm/cpu.c so far, which doesn't use "link" properties (that
require create()).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-22-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the one-user function to the place it is being used.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200110153039.1379601-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All callers use error_abort, and even the function itself calls with
error_abort.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is already documented in the header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only access this variable in the RTAS_SYSPARM_SPLPAR_CHARACTERISTICS
case. Use it in place and remove the local declaration.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200121110349.25842-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We received a SpaprMachineState argument. Since SpaprMachineState
inherits of MachineState, use it instead of calling qdev_get_machine.
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200121110349.25842-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we have the MachineState already available locally,
use it instead of the global current_machine.
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200121110349.25842-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use virtio_delete_queue to make it more clear.
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200117075547.60864-3-pannengyuan@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To ease review/modifications of this Makefile, group generic
objects first, then system-mode specific ones, and finally
peripherals (which are only used in system-mode).
No logical changes introduced here.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200118140619.26333-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The user-mode code does not use this API, restrict it
to the system-mode.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200118140619.26333-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need to explicit this obvious switch fall through.
Stay consistent with the rest of the codebase.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191218192526.13845-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need to explicit these obvious switch fall through
comments. Stay consistent with the rest of the codebase.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191218192526.13845-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GCC9 is confused by this comment when building with CFLAG
-Wimplicit-fallthrough=2:
hw/net/imx_fec.c: In function ‘imx_eth_write’:
hw/net/imx_fec.c:906:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
906 | if (unlikely(single_tx_ring)) {
| ^
hw/net/imx_fec.c:912:5: note: here
912 | case ENET_TDAR: /* FALLTHROUGH */
| ^~~~
cc1: all warnings being treated as errors
Rewrite the comments in the correct place, using 'fall through'
which is recognized by GCC and static analyzers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191218192526.13845-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by GCC9 when building with CFLAG -Wimplicit-fallthrough=2:
hw/timer/aspeed_timer.c: In function ‘aspeed_timer_set_value’:
hw/timer/aspeed_timer.c:283:24: error: this statement may fall through [-Werror=implicit-fallthrough=]
283 | if (old_reload || !t->reload) {
| ~~~~~~~~~~~^~~~~~~~~~~~~
hw/timer/aspeed_timer.c:287:5: note: here
287 | case TIMER_REG_STATUS:
| ^~~~
cc1: all warnings being treated as errors
Add the missing fall through comment.
Fixes: 1403f36447
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191218192526.13845-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:
hw/display/tcx.c: In function ‘tcx_dac_writel’:
hw/display/tcx.c:453:26: error: this statement may fall through [-Werror=implicit-fallthrough=]
453 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:454:9: note: here
454 | default:
| ^~~~~~~
hw/display/tcx.c: In function ‘tcx_dac_readl’:
hw/display/tcx.c:412:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
412 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:413:5: note: here
413 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Give a hint to GCC by adding the missing fall through comments.
Fixes: 55d7bfe22
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20191218192526.13845-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle bit 1 write, then post event to monitor.
Suggested by Paolo, declear a new event, using GUEST_PANICKED could
cause upper layers to react by shutting down or rebooting the guest.
In advance for extention, add GuestPanicInformation in event message.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similarly to what we already do with qdev, use a helper to overload the
reset QOM methods of the parent in children classes, for clarity.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <157650847239.354886.2782881118916307978.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch set contains a handful of collected fixes that I'd like to target
for the 5.0 soft freeze (I know that's a long way away, I just don't know what
else to call these):
* A fix for a memory leak initializing the sifive_u board.
* Fixes to privilege mode emulation related to interrupts and fstatus.
Notably absent is the H extension implementation. That's pretty much reviewed,
but not quite ready to go yet and I didn't want to hold back these important
fixes. This boots 32-bit and 64-bit Linux (buildroot this time, just for fun)
and passes "make check".
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl4ngWATHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiT4eD/450dJ8tGRJKA7V/XEYFM4yYZ87cgsE
HSF3E4lOTdjqp+wNwag2P1uIFJO1snqAa+6qwQFLsPRtGwn43hQzTbay86L7sPK8
YXL143OaQz0jUtcmEyTJ2EczOti4bVhX+gy9T4NckvsteSJHnHbMmdqfaafwVlmy
Qrx2IMAwY8k7+Dfil2INZTp4jlJ6ibe0XwziiMM+5RwTL2a30vYAREkRU3wrF0UN
87BVp5jA5ytiOAtJoniD6Yh9zKgDhkQwv6orJUbIseAWhJUvVVoMg4IIdF11Hert
FoqFZy6dUbIAeCTwEtHfvgJJrA/2Mn2Go1uLG22ToStp8Vq9VGzq29MN7Zx4fM8J
22j3SOwOzUVGl0bSsSktfQ+QqJEMXRfWGzq4/al0JCjEx68DMKkVW3V5P4H8FP5Z
7ZlBvf9NxaZeXLFOavZgW0fQBdVKMjb0Uk2QXWbe45TdMOPQ7BT8WGRogb0MhOyW
t8iyKPCaYfF0NygOSCUaRdZ7Ng2NkAvppyUiAFccmttlPbaYSui306yMIJ9Ls2z1
3pny3gwdMTIy0/86yEWdi6gffVgUR/o9bhwRDjMQpJU21cAHn06zJjPM4hnPk83Z
j0/5JTQFWJzMO7xML9btMUV/bdPp5nJmI2ljQgkgaT92Qi3e9x4je09Duky5R2Bl
XbGrB9GzcDjAtw==
=WooQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf1' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 1
This patch set contains a handful of collected fixes that I'd like to target
for the 5.0 soft freeze (I know that's a long way away, I just don't know what
else to call these):
* A fix for a memory leak initializing the sifive_u board.
* Fixes to privilege mode emulation related to interrupts and fstatus.
Notably absent is the H extension implementation. That's pretty much reviewed,
but not quite ready to go yet and I didn't want to hold back these important
fixes. This boots 32-bit and 64-bit Linux (buildroot this time, just for fun)
and passes "make check".
# gpg: Signature made Tue 21 Jan 2020 22:55:28 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf1:
target/riscv: update mstatus.SD when FS is set dirty
target/riscv: fsd/fsw doesn't dirty FP state
target/riscv: Fix tb->flags FS status
riscv: Set xPIE to 1 after xRET
riscv/sifive_u: fix a memory leak in soc_realize()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
-----BEGIN PGP SIGNATURE-----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=UUVN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b' into staging
virtiofsd first pull v2
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
# gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits)
virtiofsd: add some options to the help message
virtiofsd: stop all queue threads on exit in virtio_loop()
virtiofsd/passthrough_ll: Pass errno to fuse_reply_err()
virtiofsd: Convert lo_destroy to take the lo->mutex lock itself
virtiofsd: add --thread-pool-size=NUM option
virtiofsd: fix lo_destroy() resource leaks
virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races
virtiofsd: process requests in a thread pool
virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance
virtiofsd: add definition of fuse_buf_writev()
virtiofsd: passthrough_ll: Use cache_readdir for directory open
virtiofsd: Fix data corruption with O_APPEND write in writeback mode
virtiofsd: Reset O_DIRECT flag during file open
virtiofsd: convert more fprintf and perror to use fuse log infra
virtiofsd: do not always set FUSE_FLOCK_LOCKS
virtiofsd: introduce inode refcount to prevent use-after-free
virtiofsd: passthrough_ll: fix refcounting on remove/rename
libvhost-user: Fix some memtable remap cases
virtiofsd: rename inode->refcount to inode->nlookup
virtiofsd: prevent races with lo_dirp_put()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we receive an unexpected message type on the slave fd, print
the type.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The Exynos4210 serial driver uses an interrupt line to signal if receive
data is available. Connect that interrupt with the DMA controller's
'peripheral busy' gpio pin to stop the DMA if there is no more receive
data available. Without this patch, receive DMA runs wild and fills the
entire receive DMA buffer with invalid data.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-9-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To support receive DMA, we need to inform the DMA controller if receive data
is available. Otherwise the DMA controller keeps requesting data, causing
receive errors.
Implement this using an interrupt line. The instantiating code then needs
to connect the interrupt with the matching DMA controller GPIO pin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-8-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The driver already implements a receive FIFO, but it does not
handle receive FIFO trigger levels and timeout. Implement the
missing functionality.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-7-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
After restoring a VM, serial parameters need to be updated to reflect
restored register values. Implement a post_load function to handle this
situation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-6-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace debug code with tracing to aid debugging.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-5-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First parameter to exynos4210_get_irq() is not the SPI port number,
but the interrupt group number. Interrupt groups are 20 for mdma
and 21 for pdma. Interrupts are not inverted. Controllers support 32
events (pdma) or 31 events (mdma). Events must all be routed to a single
interrupt line. Set other parameters as documented in Exynos4210 datasheet,
section 8 (DMA controller).
Fixes: 59520dc65e ("hw/arm/exynos4210: Add DMA support for the Exynos4210")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-4-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed in 870c034da0, hopefully reported by Coverity.
Fixes: Coverity CID 1412793 (Incorrect expression)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200121213853.9601-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can use existing helper function to trigger hotplug handler
plug, which makes code clearer.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200120012755.44581-3-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is extra indent in ACPI GED hotplug cb that should be
deleted.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200120012755.44581-2-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop a trailing whitespace. Make line shorter.
Fixes: 7652511473 ("vhost: Only align sections for vhost-user")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per the ACPI spec (version 6.1, section 6.1.5 _HID) it is not required
on enumerated buses (like PCI in this case), _ADR is required (and is
already there). And the _HID value is wrong. Linux appears to ignore
the _HID entry, but Windows 10 detects it as 'Unknown Device' and there
is no driver available. See https://bugs.launchpad.net/qemu/+bug/1856724
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200120170725.24935-6-minyard@acm.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I added hugepage alignment code in c1ece84e7c to deal with
vhost-user + postcopy which needs aligned pages when using userfault.
However, on x86 the lower 2MB of address space tends to be shotgun'd
with small fragments around the 512-640k range - e.g. video RAM, and
with HyperV synic pages tend to sit around there - again splitting
it up. The alignment code complains with a 'Section rounded to ...'
error and gives up.
Since vhost-user already filters out devices without an fd
(see vhost-user.c vhost_user_mem_section_filter) it shouldn't be
affected by those overlaps.
Turn the alignment off on vhost-kernel so that it doesn't try
and align, and thus won't hit the rounding issues.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200116202414.157959-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add the memory region names to section rounding/alignment
warnings.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200116202414.157959-2-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Receive/transmit/event vqs forgot to cleanup in vhost_vsock_unrealize. This
patch save receive/transmit vq pointer in realize() and cleanup vqs
through those vq pointers in unrealize(). The leak stack is as follow:
Direct leak of 21504 byte(s) in 3 object(s) allocated from:
#0 0x7f86a1356970 (/lib64/libasan.so.5+0xef970) ??:?
#1 0x7f86a09aa49d (/lib64/libglib-2.0.so.0+0x5249d) ??:?
#2 0x5604852f85ca (./x86_64-softmmu/qemu-system-x86_64+0x2c3e5ca) /mnt/sdb/qemu/hw/virtio/virtio.c:2333
#3 0x560485356208 (./x86_64-softmmu/qemu-system-x86_64+0x2c9c208) /mnt/sdb/qemu/hw/virtio/vhost-vsock.c:339
#4 0x560485305a17 (./x86_64-softmmu/qemu-system-x86_64+0x2c4ba17) /mnt/sdb/qemu/hw/virtio/virtio.c:3531
#5 0x5604858e6b65 (./x86_64-softmmu/qemu-system-x86_64+0x322cb65) /mnt/sdb/qemu/hw/core/qdev.c:865
#6 0x5604861e6c41 (./x86_64-softmmu/qemu-system-x86_64+0x3b2cc41) /mnt/sdb/qemu/qom/object.c:2102
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200115062535.50644-1-pannengyuan@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use virtio_delete_queue to make it more clear.
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200117075547.60864-3-pannengyuan@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Use virtio_delete_queue to make it more clear.
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200117060927.51996-3-pannengyuan@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
v->vq forgot to cleanup in virtio_9p_device_unrealize, the memory leak
stack is as follow:
Direct leak of 14336 byte(s) in 2 object(s) allocated from:
#0 0x7f819ae43970 (/lib64/libasan.so.5+0xef970) ??:?
#1 0x7f819872f49d (/lib64/libglib-2.0.so.0+0x5249d) ??:?
#2 0x55a3a58da624 (./x86_64-softmmu/qemu-system-x86_64+0x2c14624) /mnt/sdb/qemu/hw/virtio/virtio.c:2327
#3 0x55a3a571bac7 (./x86_64-softmmu/qemu-system-x86_64+0x2a55ac7) /mnt/sdb/qemu/hw/9pfs/virtio-9p-device.c:209
#4 0x55a3a58e7bc6 (./x86_64-softmmu/qemu-system-x86_64+0x2c21bc6) /mnt/sdb/qemu/hw/virtio/virtio.c:3504
#5 0x55a3a5ebfb37 (./x86_64-softmmu/qemu-system-x86_64+0x31f9b37) /mnt/sdb/qemu/hw/core/qdev.c:876
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200117060927.51996-2-pannengyuan@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Greg Kurz <groug@kaod.org>
Firmware can enumerate present at boot APs by broadcasting wakeup IPI,
so that woken up secondary CPUs could register them-selves.
However in CPU hotplug case, it would need to know architecture
specific CPU IDs for possible and hotplugged CPUs so it could
prepare environment for and wake hotplugged AP.
Reuse and extend existing CPU hotplug interface to return architecture
specific ID for currently selected CPU in 2 registers:
- lower 32 bits in ACPI_CPU_CMD_DATA_OFFSET_RW
- upper 32 bits in ACPI_CPU_CMD_DATA2_OFFSET_R
On x86, firmware will use CPHP_GET_CPU_ID_CMD for fetching the APIC ID
when handling hotplug SMI.
Later, CPHP_GET_CPU_ID_CMD will be used on ARM to retrieve MPIDR,
which serves the similar to APIC ID purpose.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-10-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
No functional change in practice, patch only aims to properly
document (in spec and code) intended usage of the reserved space.
The new field is to be used for 2 purposes:
- detection of modern CPU hotplug interface using
CPHP_GET_NEXT_CPU_WITH_EVENT_CMD command.
procedure will be described in follow up patch:
"acpi: cpuhp: spec: add typical usecases"
- for returning upper 32 bits of architecture specific CPU ID,
for new CPHP_GET_CPU_ID_CMD command added by follow up patch:
"acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command"
Change is backward compatible with 4.2 and older machines, as field was
unconditionally reserved and always returned 0x0 if modern CPU hotplug
interface was enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-8-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It's not what real HW does, implementing which would be overkill [**]
and would require complex cross stack changes (QEMU+firmware) to make
it work.
So considering that SMRAM is owned by MCH, for simplicity (ab)use
reserved Q35 register, which allows QEMU and firmware easily init
and make RAM at SMBASE available only from SMM context.
Patch uses commit (2f295167e0 q35/mch: implement extended TSEG sizes)
for inspiration and uses reserved register in config space at 0x9c
offset [*] to extend q35 pci-host with ability to use 128K at
0x30000 as SMRAM and hide it (like TSEG) from non-SMM context.
Usage:
1: write 0xff in the register
2: if the feature is supported, follow up read from the register
should return 0x01. At this point RAM at 0x30000 is still
available for SMI handler configuration from non-SMM context
3: writing 0x02 in the register, locks SMBASE area, making its contents
available only from SMM context. In non-SMM context, reads return
0xff and writes are ignored. Further writes into the register are
ignored until the system reset.
*) https://www.mail-archive.com/qemu-devel@nongnu.org/msg455991.html
**) https://www.mail-archive.com/qemu-devel@nongnu.org/msg646965.html
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
'out' label in v9fs_xattr_write() and 'out_nofid' label in
v9fs_complete_rename() can be replaced by appropriate return
calls.
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
init_in_iov_from_pdu might not be able to allocate the full buffer size
requested, which comes from the client and could be larger than the
transport has available at the time of the request. Specifically, this
can happen with read operations, with the client requesting a read up to
the max allowed, which might be more than the transport has available at
the time.
Today the implementation of init_in_iov_from_pdu throws an error, both
Xen and Virtio.
Instead, change the V9fsTransport interface so that the size becomes a
pointer and can be limited by the implementation of
init_in_iov_from_pdu.
Change both the Xen and Virtio implementations to set the size to the
size of the buffer they managed to allocate, instead of throwing an
error. However, if the allocated buffer size is less than P9_IOHDRSZ
(the size of the header) still throw an error as the case is unhandable.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
CC: groug@kaod.org
CC: anthony.perard@citrix.com
CC: roman@zededa.com
CC: qemu_oss@crudebyte.com
[groug: fix 32-bit build]
Signed-off-by: Greg Kurz <groug@kaod.org>
local_unlinkat_common() is supposed to always return -1 on error.
This is being done by jumps to the 'err_out' label, which is
a 'return ret' call, and 'ret' is initialized with -1.
Unfortunately there is a condition in which the function will
return 0 on error: in a case where flags == AT_REMOVEDIR, 'ret'
will be 0 when reaching
map_dirfd = openat_dir(...)
And, if map_dirfd == -1 and errno != ENOENT, the existing 'err_out'
jump will execute 'return ret', when ret is still set to zero
at that point.
This patch fixes it by changing all 'err_out' labels by
'return -1' calls, ensuring that the function will always
return -1 on error conditions. 'ret' can be left unintialized
since it's now being used just to store the result of 'unlinkat'
calls.
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
[groug: changed prefix in title to be "9p: local:"]
Signed-off-by: Greg Kurz <groug@kaod.org>
There is a possible memory leak while local_link return -1 without free
odirpath and oname.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Jaijun Chen <chenjiajun8@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Migration is silently broken now with x2apic config like this:
-smp 200,maxcpus=288,sockets=2,cores=72,threads=2 \
-device intel-iommu,intremap=on,eim=on
After migration, the guest kernel could hang at anything, due to
x2apic bit not migrated correctly in IA32_APIC_BASE on some vcpus, so
any operations related to x2apic could be broken then (e.g., RDMSR on
x2apic MSRs could fail because KVM would think that the vcpu hasn't
enabled x2apic at all).
The issue is that the x2apic bit was never applied correctly for vcpus
whose ID > 255 when migrate completes, and that's because when we
migrate APIC we use the APICCommonState.id as instance ID of the
migration stream, while that's too short for x2apic.
Let's use the newly introduced initial_apic_id for that.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was always used as 32bit, so define it as used to be clear.
Instead of using -1 as the auto-gen magic value, we switch to
UINT32_MAX. We also make sure that we don't auto-gen this value to
avoid overflowed instance IDs without being noticed.
Suggested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The IAR0/IAR1 register is used to acknowledge an interrupt - a read of the
register activates the highest priority pending interrupt and provides its
interrupt ID. Activating an interrupt can change the CPU's virtual interrupt
state - this change makes sure the virtual irq state is updated.
Signed-off-by: Jeff Kubascik <jeff.kubascik@dornerworks.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200113154607.97032-1-jeff.kubascik@dornerworks.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an emulation for the RNGC random number generator and the compatible
RNGB variant. These peripherals are included (at least) in imx25 and
imx35 chipsets.
The emulation supports the initial self test, reseeding the prng and
reading random numbers.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We won't reuse the CPU IRQ/FIQ variables. Simplify by calling
qdev_get_gpio_in() in place.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
By calling qdev_pass_gpios() we don't need to hold a copy of the
IRQs from the INTC into the SoC state.
Instead of filling an array of qemu_irq and passing it around, we
can now directly call qdev_get_gpio_in() on the SoC.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
These definitions are specific to the A10 SoC and don't need
to be exported to the different Allwinner peripherals.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ef941d59fd8658589d34ed432e1d6dfdcf7fb1d0.1576658572.git.alistair@alistair23.me
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a minor memory leak in riscv_sifive_u_soc_realize()
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Factor out slot status check into a helper function. Add an additional
check after completing transfers. This is needed in case a guest
queues multiple transfers in a row and a device unplug happens while
qemu processes them.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1786413
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200107083606.12393-1-kraxel@redhat.com
start vm with libvirt, when GuestOS running, enter poweroff command using
the xhci keyboard, then ASAN shows memory leak stack：
Direct leak of 80 byte(s) in 5 object(s) allocated from:
#0 0xfffd1e6431cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
#1 0xfffd1e107163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
#2 0xaaad39051367 in qemu_sglist_init /qemu/dma-helpers.c:43
#3 0xaaad3947c407 in pci_dma_sglist_init /qemu/include/hw/pci/pci.h:842
#4 0xaaad3947c407 in xhci_xfer_create_sgl /qemu/hw/usb/hcd-xhci.c:1446
#5 0xaaad3947c407 in xhci_setup_packet /qemu/hw/usb/hcd-xhci.c:1618
#6 0xaaad3948625f in xhci_submit /qemu/hw/usb/hcd-xhci.c:1827
#7 0xaaad3948625f in xhci_fire_transfer /qemu/hw/usb/hcd-xhci.c:1839
#8 0xaaad3948625f in xhci_kick_epctx /qemu/hw/usb/hcd-xhci.c:1991
#9 0xaaad3948f537 in xhci_doorbell_write /qemu/hw/usb/hcd-xhci.c:3158
#10 0xaaad38bcbfc7 in memory_region_write_accessor /qemu/memory.c:483
#11 0xaaad38bc654f in access_with_adjusted_size /qemu/memory.c:544
#12 0xaaad38bd1877 in memory_region_dispatch_write /qemu/memory.c:1482
#13 0xaaad38b1c77f in flatview_write_continue /qemu/exec.c:3167
#14 0xaaad38b1ca83 in flatview_write /qemu/exec.c:3207
#15 0xaaad38b268db in address_space_write /qemu/exec.c:3297
#16 0xaaad38bf909b in kvm_cpu_exec /qemu/accel/kvm/kvm-all.c:2383
#17 0xaaad38bb063f in qemu_kvm_cpu_thread_fn /qemu/cpus.c:1246
#18 0xaaad39821c93 in qemu_thread_start /qemu/util/qemu-thread-posix.c:519
#19 0xfffd1c8378bb (/lib64/libpthread.so.0+0x78bb)
#20 0xfffd1c77616b (/lib64/libc.so.6+0xd616b)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-id: 20200110105855.81144-1-kuhn.chenqun@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I've got a case where usbredir_write manages to call back into itself
via spice; this patch causes the recursion to fail (0 bytes) the write;
this seems to avoid the deadlock I was previously seeing.
I can't say I fully understand the interaction of usbredir and spice;
but there are a few similar guards in spice and usbredir
to catch other cases especially onces also related to spice_server_char_device_wakeup
This case seems to be triggered by repeated migration+repeated
reconnection of the viewer; but my debugging suggests the migration
finished before this hits.
The backtrace of the hang looks like:
reds_handle_ticket
reds_handle_other_links
reds_channel_do_link
red_channel_connect
spicevmc_connect
usbredir_create_parser
usbredirparser_do_write
usbredir_write
qemu_chr_fe_write
qemu_chr_write
qemu_chr_write_buffer
spice_chr_write
spice_server_char_device_wakeup
red_char_device_wakeup
red_char_device_write_to_device
vmc_write
usbredirparser_do_write
usbredir_write
qemu_chr_fe_write
qemu_chr_write
qemu_chr_write_buffer
qemu_mutex_lock_impl
and we fail as we lang through qemu_chr_write_buffer's lock
twice.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1752320
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191218113012.13331-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-redir.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-3-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-host.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-2-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's another pull request for qemu-5.0 of ppc related changes.
Highlights are:
* First parts of support for POWER Secure VMs
* Rework to clean up how we pass context information to the various
components of the pnv machine (reduces usage of qdev_get_machine())
* Assorted cleanups and bugfixes
-----BEGIN PGP SIGNATURE-----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=gbsd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200108' into staging
ppc patch queue 2020-01-08
Here's another pull request for qemu-5.0 of ppc related changes.
Highlights are:
* First parts of support for POWER Secure VMs
* Rework to clean up how we pass context information to the various
components of the pnv machine (reduces usage of qdev_get_machine())
* Assorted cleanups and bugfixes
# gpg: Signature made Wed 08 Jan 2020 05:22:08 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200108: (26 commits)
ppc/pnv: fix check on return value of blk_getlength()
ppc/pnv: check return value of blk_pwrite()
pnv/psi: Consolidate some duplicated code in pnv_psi_realize()
pnv/psi: Add device reset hook
pnv/xive: Deduce the PnvXive pointer from XiveTCTX::xptr
spapr/xive: Deduce the SpaprXive pointer from XiveTCTX::xptr
xive: Add a "presenter" link property to the TCTX object
ppc/pnv: Add a "pnor" const link property to the BMC internal simulator
ppc/pnv: Add an "nr-threads" property to the base chip class
xive: Use the XIVE fabric link under the XIVE router
spapr, pnv, xive: Add a "xive-fabric" link to the XIVE router
pnv/xive: Use device_class_set_parent_realize()
ppc/pnv: Introduce a "xics" property under the POWER8 chip
ppc/pnv: Introduce a "xics" property alias under the PSI model
spapr/xive: remove redundant check in spapr_match_nvt()
ppc/pnv: Drop "num-chips" machine property
ppc440_bamboo.c: remove label from bamboo_load_device_tree()
spapr.c: remove 'out' label in spapr_dt_cas_updates()
ppc/spapr: Don't call KVM_SVM_OFF ioctl on TCG
spapr/xive: Use device_class_set_parent_realize()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- build fix (missing x86-iommu stubs)
- python fixes for freebsd and OSX
- nicer reporting of acceptance failures
- fix build nesting of fp-test (breaks bsds)
- semihosting clean-ups
- support for blocking semihosting console
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl4XEbsACgkQ+9DbCVqe
KkRtOwgAkdw3Pwi6sSlKdouR0lcWsRRqY2T3nA+xM/JrS+W9+hJ3VsM7EcBCJZcJ
juJkQs3kU7Gs3LAeKbjmNq9xj9eTElD20l23RufiNB2CgULwHJ2+skGCTCq+1T1P
VBWWNky4RyGjgcKoQQ8cNUmFhntnemGjnxvz1G0dObPu6yl5jNXIk7qJFZkSsERy
YptCN8AF2bLXekYiB9Zn0xRd+O5Q4u/RtOg62REZoZOTA11M2Zuy+fkRK4XSzM/I
wVdRd0t0hKViktl3Z4iu3MsQqCxaHIirsfEMVkmbGWMmepq3db9Xs1k4Ss2I7Uo3
YRTxj1BCwynsGbDpWSI/XHOYgKp8rA==
=lSAv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-semihosting-090120-2' into staging
Testing fixes and semiconsole support:
- build fix (missing x86-iommu stubs)
- python fixes for freebsd and OSX
- nicer reporting of acceptance failures
- fix build nesting of fp-test (breaks bsds)
- semihosting clean-ups
- support for blocking semihosting console
# gpg: Signature made Thu 09 Jan 2020 11:42:51 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-semihosting-090120-2:
tests/tcg: add user version of dumb-as-bricks semiconsole test
tests/tcg: extract __semi_call into a header and expand
tests/tcg: add a dumb-as-bricks semihosting console test
semihosting: add qemu_semihosting_console_inc for SYS_READC
target/arm: only update pc after semihosting completes
target/arm: remove unused EXCP_SEMIHOST leg
testing: don't nest build for fp-test
travis.yml: install homebrew python for OS X
travis.yml: duplicate before_script for MacOSX
travis.yml: Detach build and test steps
travis.yml: avocado: Print logs of non-pass tests only
freebsd: use python37
tests/vm: update openbsd to release 6.6
hw/i386/x86-iommu: Add missing stubs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provides a blocking call to read a character from the console using
semihosting.chardev, if specified. This takes some careful command
line options to use stdio successfully as the serial ports, monitor
and semihost all want to use stdio. Here's a sample set of command
line options which share stdio between semihost, monitor and serial
ports:
qemu \
-chardev stdio,mux=on,id=stdio0 \
-serial chardev:stdio0 \
-semihosting-config enable=on,chardev=stdio0 \
-mon chardev=stdio0,mode=readline
This creates a chardev hooked to stdio and then connects all of the
subsystems to it. A shorter mechanism would be good to hear about.
Signed-off-by: Keith Packard <keithp@keithp.com>
Message-Id: <20191104204230.12249-1-keithp@keithp.com>
[AJB: fixed up deadlock, minor commit title reword]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In commit 6c730e4af9 we introduced a stub to build the MicroVM
machine without Intel IOMMU. This stub is incomplete for the
other PC machines. Add the missing stubs.
Fixes: 6c730e4af9
Reported-by: Travis-CI
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191220154225.25879-1-philmd@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
blk_getlength() returns an int64_t but the result is stored in a
uint32_t. Errors (negative values) won't be caught by the check in
pnv_pnor_realize() and blk_blockalign() will allocate a very large
buffer in such cases.
Fixes Coverity issue CID 1412226.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200107171809.15556-3-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When updating the PNOR file contents, we should check for a possible
failure of blk_pwrite().
Fixes Coverity issue CID 1412228.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200107171809.15556-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The proper way to do that would be to use device_class_set_parent_realize(),
but defining a Pnv8PsiClass and a Pnv9PsiClass types with a parent_realize
pointer adds a fair amount of code. Calling pnv_psi_realize() explicitely
is fine for now.
This should probably be achieved with a device realize hook in the
PSI base class and device_class_set_parent_realize() in the children
classes.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <157841476667.66386.13659183399113837990.stgit@bahia.tlslab.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
And call it from a QEMU reset handler. This allows each PNV child class to
override the reset hook if needed, eg. POWER8 doesn't but POWER9 does.
The proper way to do that would be to use device_class_set_parent_reset(),
but defining a Pnv8PsiClass and a Pnv9PsiClass types with a parent_reset
pointer adds a fair amount of code. Calling pnv_psi_reset() explicitely is
fine for now.
A subsequent patch will consolidate the call to qemu_register_reset() in
a single place.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <157841476035.66386.17838417527621752518.stgit@bahia.tlslab.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
And use it instead of reaching out to the machine. This allows to get
rid of pnv_get_chip().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106145645.4539-11-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
And use it instead of reaching out to the machine. This allows to get rid
of a call to qdev_get_machine() and to reduce the scope of another one so
that it is only used within the argument list of error_append_hint(). This
is an acceptable tradeoff compared to all it would require to know about
the maximum number of CPUs here without calling qdev_get_machine().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106145645.4539-10-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will be used in subsequent patches to access the XIVE associated to
a TCTX without reaching out to the machine through qdev_get_machine().
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[ groug: - split patch
- write subject and changelog ]
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106145645.4539-9-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows to get rid of a call to qdev_get_machine().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106145645.4539-8-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Set it at chip creation and forward it to the cores. This allows to drop
a call to qdev_get_machine().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200106145645.4539-7-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the spapr and pnv machines do set the "xive-fabric" link, the
use of the XIVE fabric pointer becomes mandatory. This is checked with
an assert() in a new realize hook. Since the XIVE router is realized at
machine init for the all the machine's life time, no risk to abort an
already running guest (ie. not a hotplug path).
This gets rid of a qdev_get_machine() call.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106145645.4539-6-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In order to get rid of qdev_get_machine(), first add a pointer to the
XIVE fabric under the XIVE router and make it configurable through a
QOM link property.
Configure it in the spapr and pnv machine. In the case of pnv, the XIVE
routers are under the chip, so this is done with a QOM alias property of
the POWER9 pnv chip.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106145645.4539-5-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XIVE router base class currently inherits an empty realize hook
from the sysbus device base class, but it will soon implement one
of its own to perform some sanity checks. Do the preliminary plumbing
to have it called.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200106145645.4539-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER8 is the only chip using the XICS interface. Add a "xics" link
and a XICSFabric attribute under this chip to remove the use of
qdev_get_machine()
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200106145645.4539-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This removes the need of the intermediate link under PSI to pass the
XICS link to the underlying ICSState object.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200106145645.4539-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_match_nvt() is a XIVE operation and is used by the machine to
look for a matching target when an event notification is being
delivered. An assert checks that spapr_match_nvt() is called only when
the machine has selected the XIVE interrupt mode but it is redundant
with the XIVE_PRESENTER() dynamic cast.
Apply the cast to spapr->active_intc and remove the assert.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106163207.4608-1-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The number of CPU chips of the powernv machine is configurable through a
"num-chips" property. This doesn't fit well with the CPU topology, eg.
some configurations can come up with more CPUs than the maximum of CPUs
set in the toplogy. This causes assertion to be hit with mttcg:
-machine powernv,num-chips=2 -smp cores=2 -accel tcg,thread=multi
ERROR:
tcg/tcg.c:789:tcg_register_thread: assertion failed: (n < ms->smp.max_cpus)
Aborted (core dumped)
Mttcg mandates the CPU topology to be dimensioned to the actual number
of CPUs, depending on the number of chips the user asked for. That is,
'-machine num-chips=N' should always have a '-smp' companion with a
topology that meats the resulting number of CPUs, typically
'-smp sockets=N'.
It thus seems that "num-chips" doesn't bring anything but forcing the user
to specify the requested number of chips on the command line twice. Simplify
the command line by computing the number of chips based on the CPU topology
exclusively. The powernv machine isn't a production thing ; it is mostly
used by developpers to prepare the bringup of real HW. Because of this and
for simplicity, this deliberately ignores the official deprecation process
and dumps "num-chips" right away : '-smp sockets=N' is now the only way to
control the number of CPU chips.
This is done at machine init because smp_parse() is called after instance
init.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157830658266.533764.2214183961444213947.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
'out' label can be replaced by 'return -1' in all cases.
CC: David Gibson <david@gibson.dropbear.id.au>
CC: qemu-ppc@nongnu.org
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200106182425.20312-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
'out' can be replaced by 'return' with the appropriate
return value.
CC: David Gibson <david@gibson.dropbear.id.au>
CC: qemu-ppc@nongnu.org
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200106182425.20312-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XIVE router base class currently inherits an empty realize hook
from the sysbus device base class, but it will soon implement one
of its own to perform some sanity checks. Do the preliminary plumbing
to have it called.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191219181155.32530-6-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Register addr 1 is defined as buffer A with handshake (vBufAH),
register addr 15 is also defined as buffer A without handshake (vBufA).
As both addresses access the same register, remove the definition of
'anh' and use only 'a' (with VIA_REG_ANH and VIA_REG_A).
Fixes: 51f233ec92 ("misc: introduce new mos6522 VIA device and enable it for ppc builds")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191220214054.76525-1-laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use container_of() instead of qdev_get_machine()
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191219181155.32530-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A pseries guest can be run as a secure guest on Ultravisor-enabled
POWER platforms. When such a secure guest is reset, we need to
release/reset a few resources both on ultravisor and hypervisor side.
This is achieved by invoking this new ioctl KVM_PPC_SVM_OFF from the
machine reset path.
As part of this ioctl, the secure guest is essentially transitioned
back to normal mode so that it can reboot like a regular guest and
become secure again.
This ioctl has no effect when invoked for a normal guest. If this ioctl
fails for a secure guest, the guest is terminated.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20191219031445.8949-3-bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
-----BEGIN PGP SIGNATURE-----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=iYVd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/prop-ptr-pull-request' into staging
Clean-ups: qom-ify serial and remove QDEV_PROP_PTR
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
# gpg: Signature made Tue 07 Jan 2020 15:01:26 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/prop-ptr-pull-request: (37 commits)
qdev/qom: remove some TODO limitations now that PROP_PTR is gone
qdev: remove QDEV_PROP_PTR
qdev: remove PROP_MEMORY_REGION
omap-gpio: remove PROP_PTR
omap-i2c: remove PROP_PTR
omap-intc: remove PROP_PTR
smbus-eeprom: remove PROP_PTR
cris: improve passing PIC interrupt vector to the CPU
mips/cps: fix setting saar property
qdev: use g_strcmp0() instead of open-coding it
leon3: use qdev gpio facilities for the PIL
leon3: use qemu_irq framework instead of callback as property
dp8393x: replace PROP_PTR with PROP_LINK
etraxfs: remove PROP_PTR usage
lance: replace PROP_PTR with PROP_LINK
vmmouse: replace PROP_PTR with PROP_LINK
sm501: make SerialMM a child, export chardev property
mips: use sysbus_mmio_get_region() instead of internal fields
mips: use sysbus_add_io()
mips: baudbase is 115200 by default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl4TaMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpvzgH/2LyDAzCa9h93ikSJjmyUk5FUaqve38daEb3
S3JYjwKxQx7u1ydooKhvBQnBCZ2i3S+k62gfYyKB+nBv8xvjs0Eg5D1YJ5E8hciy
lf5OFGWWtX2iPDjZwQwT13kiJe0o3JRGxJJ6XqTEG+1EYOp7cky/FEv4PD030b9m
I2wROZ/Am+onB9YJX8c0Vv1CG+AryuJNXnvwQzTXEjj4U7bEYUyJwVZaCRyAdWQ3
uYXIZN9VwjVX6BFvy9ZAJbEsUVJvOM1/aQaDqcrLz+VlzRT7bRkKHi2G3vakrm1I
r5OpgyLo84132awCncbSykKDH5o8WaxLaJBjGmuBfasMz9wPzAg=
=uL1o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: fixes, features
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (32 commits)
intel_iommu: add present bit check for pasid table entries
intel_iommu: a fix to vtd_find_as_from_bus_num()
virtio-net: delete also control queue when TX/RX deleted
virtio: reset region cache when on queue deletion
virtio-mmio: update queue size on guest write
tests: add virtio-scsi and virtio-blk seg_max_adjust test
virtio: make seg_max virtqueue size dependent
hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
vhost-user-scsi: reset the device if supported
vhost-user: add VHOST_USER_RESET_DEVICE to reset devices
hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument
hw/pci/pci_host: Remove redundant PCI_DPRINTF()
virtio-mmio: Clear v2 transport state on soft reset
ACPI: add expected files for HMAT tests (acpihmat)
tests/bios-tables-test: add test cases for ACPI HMAT
tests/numa: Add case for QMP build HMAT
hmat acpi: Build Memory Side Cache Information Structure(s)
hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
numa: Extend CLI to provide memory side cache information
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC hw/char/virtio-console.o
hw/char/virtio-console.c: In function ‘chr_event’:
hw/char/virtio-console.c:154:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
154 | switch (event) {
| ^~~~~~
hw/char/virtio-console.c:154:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/char/virtio-console.c:154:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-11-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC s390x-softmmu/hw/block/vhost-user-blk.o
hw/block/vhost-user-blk.c: In function ‘vhost_user_blk_event’:
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
370 | switch (event) {
| ^~~~~~
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
hw/usb/ccid-card-passthru.c: In function ‘ccid_card_vscard_event’:
hw/usb/ccid-card-passthru.c:314:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
314 | switch (event) {
| ^~~~~~
hw/usb/ccid-card-passthru.c:314:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
hw/usb/ccid-card-passthru.c:314:5: error: enumeration value ‘CHR_EVENT_CLOSED’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC hw/usb/redirect.o
hw/usb/redirect.c: In function ‘usbredir_chardev_event’:
hw/usb/redirect.c:1361:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
1361 | switch (event) {
| ^~~~~~
hw/usb/redirect.c:1361:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/usb/redirect.c:1361:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
hw/usb/dev-serial.c: In function ‘usb_serial_event’:
hw/usb/dev-serial.c:468:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
468 | switch (event) {
| ^~~~~~
hw/usb/dev-serial.c:468:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC s390x-softmmu/hw/char/terminal3270.o
hw/char/terminal3270.c: In function ‘chr_event’:
hw/char/terminal3270.c:156:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
156 | switch (event) {
| ^~~~~~
hw/char/terminal3270.c:156:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/char/terminal3270.c:156:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
hw/ipmi/ipmi_bmc_extern.c: In function ‘chr_event’:
hw/ipmi/ipmi_bmc_extern.c:389:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
389 | switch (event) {
| ^~~~~~
hw/ipmi/ipmi_bmc_extern.c:389:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/ipmi/ipmi_bmc_extern.c:389:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191218172009.8868-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we don't use these methods before defining them,
no need to forward-declare them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer used in the tree. The comment about user_creatable is still
quite relevant, but there is already a similar comment in qdev-core.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Igor Mammedov