Thanks to work by Peter Xu, support is introduced in Linux v6.12 to
allow pfnmap insertions at PMD and PUD levels of the page table. This
means that provided a properly aligned mmap, the vfio driver is able
to map MMIO at significantly larger intervals than PAGE_SIZE. For
example on x86_64 (the only architecture currently supporting huge
pfnmaps for PUD), rather than 4KiB mappings, we can map device MMIO
using 2MiB and even 1GiB page table entries.
Typically mmap will already provide PMD aligned mappings, so devices
with moderately sized MMIO ranges, even GPUs with standard 256MiB BARs,
will already take advantage of this support. However in order to better
support devices exposing multi-GiB MMIO, such as 3D accelerators or GPUs
with resizable BARs enabled, we need to manually align the mmap.
There doesn't seem to be a way for userspace to easily learn about PMD
and PUD mapping level sizes, therefore this takes the simple approach
to align the mapping to the power-of-two size of the region, up to 1GiB,
which is currently the maximum alignment we care about.
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Move error handling code to the end of the function so that it can more
easily be shared by new mmap failure conditions. No functional change
intended.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Data sizes in VFIO migration trace events are printed in hex format
while in migration core trace events they are printed in decimal format.
This inconsistency makes it less readable when using both trace event
types. Hence, change the data sizes print format to decimal in VFIO
migration trace events.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
vfio_state_pending_exact() is used to update migration core how much
device data is left for the device migration. Currently, the sum of
pre-copy and stop-copy sizes of the VFIO device are reported.
The pre-copy size is obtained via the VFIO_MIG_GET_PRECOPY_INFO ioctl,
which returns the amount of device data available to be transferred
while the device is in the PRE_COPY states.
The stop-copy size is obtained via the VFIO_DEVICE_FEATURE_MIG_DATA_SIZE
ioctl, which returns the total amount of device data left to be
transferred in order to complete the device migration.
According to the above, current implementation is wrong -- it reports
extra overlapping data because pre-copy size is already contained in
stop-copy size. Fix it by reporting only stop-copy size.
Fixes: eda7362af9 ("vfio/migration: Add VFIO migration pre-copy support")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Build an IPLB for any device with a bootindex (up to a maximum of 8 devices).
The IPLB chain is placed immediately before the BIOS in memory. Because this
is not a fixed address, the location of the next IPLB and number of remaining
boot devices is stored in the QIPL global variable for possible later access by
the guest during IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-16-jrossi@linux.ibm.com>
[thuth: Fix endianness problem when accessing the qipl structure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the netboot code has now been merged into the main s390-ccw.img
binary, we don't need the separate s390-netboot.img anymore. Remove
it and the code that was responsible for loading it.
Message-Id: <20240621082422.136217-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are going to link the SLOF libc into the s390-ccw.img, and this
libc needs more memory for providing space for malloc() and friends.
Thus bump the memory size that we reserve for the bios to 3 MiB
instead of only 2 MiB. While we're at it, add a proper check that
there is really enough memory assigned to the machine before blindly
using it.
Message-ID: <20240621082422.136217-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to include/qapi/error.h:
* Please don't error_setg(&error_fatal, ...), use error_report() and
* exit(), because that's more obvious.
Patch updates all instances of error_setg(&error_fatal, ...) with
error_report(...), adds the explicit exit(1) and removes redundant
return statements.
Signed-off-by: Tudor Gheorghiu <tudor.reda@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2587
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: also fold __func__ to previous line)
* Update the OpenBSD CI image to OpenBSD v7.6
* Bump timeout of the ide-test
* New maintainer for the QTests
* Disable the pci-bridge on s390x by default
-----BEGIN PGP SIGNATURE-----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=DJf9
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-10-21' of https://gitlab.com/thuth/qemu into staging
* Convert most Tuxrun Avocado tests to the new functional framework
* Update the OpenBSD CI image to OpenBSD v7.6
* Bump timeout of the ide-test
* New maintainer for the QTests
* Disable the pci-bridge on s390x by default
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmcWfCgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbV6kQ//YwRebyA192IBM+XQK5YYmguieHmWxV8J
# fZf0a1dWN8oiT3jzI48YWttiU9P6AMa/dwiuepVl4G9+d+w1c3RhS6kQqJljNbDb
# NGw+LVZZcwY1FJpEsEwbDfePkugYHmNXUU672kxz3I8bv/8NmLDc7R3cI5U/7+SP
# N4lxVM6Hd3XZZdc+O2S8En20E1oAJ6IvJwwhCqjLlT36Ez8P69KQhE0V8MtLnrBg
# FsXZuzmaxt/ZDMhTsiHNl6f7N1oD7Y2TPJrdq7V2aihpDA+zx0RlvBPpzD98ZgeS
# PtdkqjL63B5S3RL4fjJUSb/gbL4oChQ5TZDb2Dfw7Q5qPMZ1cgeJLBwdzHZEZrzF
# RTtn4fObYUqtRF3M0Ha4xXc8odSzJTV2fvpSVXcljG1E4AMcD6CMK0E472XbhkMS
# txZHW+C/IDVJ4OoSncrH8ybi1JasEqJZ0YaPfb+aTsPV058b65l+0jQJtlxLoTIf
# p5LluL3exwr0sS3Aq5tcV3pNITtCv1FkcUk7So8sohO2OLQtC9QA300CSXna8XhQ
# OxgRA1c3HXw23MTJKSWjseDIt1bajvBu+cr/pmDxlYnWWsSCcEFaAoQohwhOMA6Z
# JfJF0tSv+koUsw6hSl7146aylSvDYUKPilAGgAUAy1yscgglMvtmQqWkEta/XGP2
# U8qvX8nUwOM=
# =DJf9
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 21 Oct 2024 17:07:04 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-10-21' of https://gitlab.com/thuth/qemu:
tests/functional: Convert the Avocado sh4 tuxrun test
Revert "hw/sh4/r2d: Realize IDE controller before accessing it"
tests/functional: Convert the Avocado ppc32 tuxrun test
tests/functional: Convert the Avocado mips64el tuxrun test
tests/functional: Convert the Avocado mips64 tuxrun test
tests/functional: Convert the Avocado mipsel tuxrun test
tests/functional: Convert the Avocado mips tuxrun test
tests/functional: Convert the Avocado x86_64 tuxrun test
tests/functional: Convert the Avocado i386 tuxrun test
tests/functional: Convert the Avocado riscv64 tuxrun tests
tests/functional: Convert the Avocado riscv32 tuxrun tests
tests/functional: Convert the Avocado arm tuxrun tests
tests/functional: Convert the Avocado s390x tuxrun test
tests/functional: Convert the Avocado sparc64 tuxrun test
tests/functional: Convert the Avocado ppc64 tuxrun tests
tests/functional: Add a base class for the TuxRun tests
hw/pci-bridge: Add a Kconfig switch for the normal PCI bridge
MAINTAINERS: A new maintainer for the qtests
tests/qtest: Raise the ide-test timeout
tests/vm: update openbsd image to 7.6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 3c5f86a226.
Changing the order here caused a regression with the "tuxrun"
kernels (from https://storage.tuxboot.com/20230331/) - ATA commands
fail with a "ata1: lost interrupt (Status 0x58)" message.
Apparently we need to wire the interrupt here first before
realizing the device, so revert the change to the original
behavior.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-17-thuth@redhat.com>
The pci-bridge device is not usable on s390x, so introduce a Kconfig
switch that allows to disable it.
Message-ID: <20240913144844.427899-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avoid use of uninitialized bufioreq_evtchn. It should only
be used if buffered IOREQs are enabled.
Resolves: Coverity CID 1563383
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
The error message doesn't matter much, as the "openpic" device isn't
user-creatable. But it's the last use of
QERR_PROPERTY_VALUE_OUT_OF_RANGE, which has to go. Change the message
just like the previous commit did for x86 CPUs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Parameter @id is no longer used, drop. Return a bool to indicate
success / failure, as recommended by qapi/error.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
=uk+a
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241016
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nothing in LoongArch fw_cfg.c requires target specific definitions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-3-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
ACPI ged is used for power management on LoongArch virt platform, in
general it is parsed from acpi table. However if system boot directly from
elf kernel, no UEFI bios is provided and acpi table cannot be used also.
Here acpi ged pm register is exposed with FDT table, it is compatbile
with syscon method in FDT table, only that acpi ged pm register is accessed
with 8-bit mode, rather with 32-bit mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918014206.2165821-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Macro definition is added for acpi sleep control register, ged emulation
driver can use the macro , also it can be used in FDT table if ged is
exposed with FDT table.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
mips_cpu_create_with_clock() creates a vCPU. Pass it the vCPU
endianness requested by argument. Update the board call sites.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-17-philmd@linaro.org>
Have the CPS expose a 'cpu-big-endian' property so it can
set it to the vCPUs it creates.
Note, since the number of vCPUs created is dynamic, we can
not use QOM aliases.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-16-philmd@linaro.org>
Move code evaluation from preprocessor to compiler so
both if() ladders are processed. Mostly style change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240930073450.33195-8-philmd@linaro.org>
The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/i386/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-9-philmd@linaro.org>
Add unimplemented-device blocks to the xilinx_zynq board
corresponding to various devices documented in the TRM
and in the device tree.
See: ug585-Zynq-7000-TRM manual B.3 (Module Summary)
Signed-off-by: Chao Liu <chao.liu@yeah.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message. Removed the clearing of
the ignore_memory_transaction_failures flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ecc.c code was used only by the PXA2xx and OMAP2 SoC devices,
which we have removed, so it is now completely unused.
Note that hw/misc/eccmemctl.c does not in fact use any of the
code frome ecc.c, so that KConfig dependency was incorrect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-6-peter.maydell@linaro.org
The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g. kzm,
the strongarm machines, sh4's sh7750), none of those machines
implement their PCMCIA controller, and they're all old and
no longer very interesting machine types.
Rather than keeping all the PCMCIA code in-tree without any
active users of it, delete it. If we need PCMCIA in future
we can always resurrect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241003140010.1653808-5-peter.maydell@linaro.org
The DSCM-1XXXX microdrive device model was used only by the
XScale-based Zaurus machine types. Now they have been removed, we
can delete this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-4-peter.maydell@linaro.org
The MAX7310 GPIO controller was used only by the XScale-based Zaurus
machine types. Now they have been removed we can remove this device
model as well.
Because this device is an I2C device, in theory it could be created
by users on the command line for boards with a different I2c
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs/outputs.
The only example a web search produces for "device max7310" is a user
trying to create this because they didn't realize that there was no
way to manipulate the GPIO lines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-3-peter.maydell@linaro.org
The MAX111X ADC device was used only by the XScale-based
Zaurus machine types. Now they have all been removed, we can
drop this device model too.
Because this device is an SSI device, in theory it could be created
by users on the command line for boards with a different SSI
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs which
correspond to ADC inputs, or the GPIO output which is an interrupt
line. The only example a web search produces for "device max1111" or
"device max1110" is our own bug report
https://gitlab.com/qemu-project/qemu/-/issues/2228
where it's used as an example of a bogus command that causes an
assertion in an aspeed machine type that wasn't expecting anything
other than flash devices on its SMC bus.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-2-peter.maydell@linaro.org
Currently the QemuLockCnt data structure and associated functions are
in the include/qemu/thread.h header. Move them to their own
qemu/lockcnt.h. The main reason for doing this is that it means we
can autogenerate the documentation comments into the docs/devel
documentation.
The copyright/author in the new header is drawn from lockcnt.c,
since the header changes were added in the same commit as
lockcnt.c; since neither thread.h nor lockcnt.c state an explicit
license, the standard default of GPL-2-or-later applies.
We include the new header (and the .c file, which was accidentally
omitted previously) in the "RCU" part of MAINTAINERS, since that
is where the lockcnt.rst documentation is categorized.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20240816132212.3602106-7-peter.maydell@linaro.org
In commit b88cfee902 we defined masks for the IBRD and FBRD
integer and fractional baud rate divider registers, to prevent the
guest from writing invalid values which could cause division-by-zero.
Unfortunately we got the mask values the wrong way around: the FBRD
register is six bits and the IBRD register is 16 bits, not
vice-versa.
You would only run into this bug if you programmed the UART to a baud
rate of less than 9600, because for 9600 baud and above the IBRD
value will fit into 6 bits, as per the table in
https://developer.arm.com/documentation/ddi0183/g/programmers-model/register-descriptions/fractional-baud-rate-register--uartfbrd
The only visible effects would be that the value read back from
the register by the guest would be truncated, and we would
print an incorrect baud rate in the debug logs.
Cc: qemu-stable@nongnu.org
Fixes: b88cfee902 ("hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2610
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20241007144732.2491331-1-peter.maydell@linaro.org
The OMAP interrupt controller code used to have an omap-intc
class and an omap2-intc class, which shared common code via
the abstract class common-omap-intc. Now we have deleted
omap2-intc, we don't need the separate abstract base class;
fold int into omap-intc.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003135323.1653230-1-peter.maydell@linaro.org
The Allwinner A10 SPI controller is added to the Allwinner A10
description, so it is available when Cubieboard is emulated.
Update the documentation for Cubieboard to indicate SPI availability.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-3-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements Allwinner A10 SPI controller emulation.
Only master-mode functionality is implemented.
Since U-Boot and Linux SPI drivers for Allwinner A10 perform only
byte-wide CPU access (no DMA) to the transmit and receive registers of
the peripheral, the emulated controller does not implement DMA control,
and supports only byte-wide access to transmit and receive registers
(half-word and word accesses will be treated as byte accesses).
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-2-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the clock period via the QOM 'qtest-clock-period' property so it
can be used in QTests. This property is only accessible in QTests (not
via HMP).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241003081105.40836-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit creates a clock in STM32L4x5 SYSCFG and wires it up to the
corresponding clock from STM32L4x5 RCC.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20241003081105.40836-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICC_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: 28cca59c46 ("hw/intc/arm_gicv3: Add NMI handling CPU interface registers")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: d2c0c6aab6 ("hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the reset and clock controller device to the stm32f405 SoC.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweak commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generic RCC class for STM32 devices. It can be used for most of
the STM32 chips. Note that it only implements enable and reset
capabilities.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweaked commit message, added MAINTAINERS lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The recently removed 'cheetah' machine was the single user
of the omap_uwire_attach() method. Remove it altogether with
the uWireSlave structure. Replace the send/receive callbacks
by Unimplemented logging.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a common shareable type for win32 & unix, and helper functions.
This simplify the code as it avoids a lot of #ifdef'ery.
Note: if it helps review, commits could be reordered to introduce the
common type before introducing shareable memory for unix.
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-19-marcandre.lureau@redhat.com>
Peter Maydell