Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
assert(0);
| }
| ^
Solve that by unifying the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-6-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
assert(0);
| }
| ^
Solve that by unifying the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-5-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Update the ADB mouse implementation to use QemuInputHandler instead of the
legacy qemu_add_mouse_event_handler() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240907173700.348818-1-mark.cave-ayland@ilande.co.uk>
[PMD: Add comment about .sync handler]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Update the Sun mouse implementation to use QemuInputHandler instead of the
legacy qemu_add_mouse_event_handler() function.
Note that this conversion adds extra sunmouse_* members to ESCCChannelState
but they are not added to the migration stream (similar to the Sun keyboard
members). If this were desired in future, the Sun devices should be split
into separate devices and added to the migration stream there instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2518
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Carl Hauser <chauser@pullman.com>
Message-ID: <20240904102301.175706-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Per datasheet, "HIGH AND LOW LIMIT REGISTERS", the lower 4 bit
of the limit registers are unused and always report 0.
The lower 4 bit should not be used for temperature comparisons,
so mask the unused bits before storing the limits.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-6-philmd@linaro.org>
[PMD: Update tests/qtest/ files]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Per datasheet, "ONE-SHOT (OS)", the OS bit always returns 0 when reading
the configuration register.
Clear the ONE_SHOT bit in the WRITE path. Now than the READ path is
simpler, we can also simplify tmp105_alarm_update().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-5-philmd@linaro.org>
The next commit will clear the ONE_SHOT bit in the WRITE
path (to keep the READ path trivial). As a preliminary step,
pass the 'oneshot' value as argument to tmp105_alarm_update().
No logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <20240906154911.86803-4-philmd@linaro.org>
To improve readability, use the registerfields API.
Define the register bits with FIELD(), and use the
FIELD_EX8() and FIELD_DP8() macros. Remove the
abbreviations in comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <20240906154911.86803-3-philmd@linaro.org>
Coding style asks for no space between variable and "++". The next patch
in this series will change one of those assignments. Instead of changing
just one with that patch, change all of them for consistency.
While at it, also fix other coding style problems reported by checkpatch.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-2-philmd@linaro.org>
In preparation of having a TX FIFO, rename the RX FIFO methods.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240719181041.49545-12-philmd@linaro.org>
We shouldn't transmit characters when the full UART or its
transmitter is disabled. However we don't want to break the
possibly incomplete "my first bare metal assembly program"s,
so we choose to simply display a warning when this occurs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240719181041.49545-9-philmd@linaro.org>
To keep MemoryRegionOps read/write handlers with similar logic,
factor pl011_read_txdata() out of pl011_read(), similar to what
the previous commit did to pl011_write().
No functional change intended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240719181041.49545-8-philmd@linaro.org>
When implementing FIFO, this code will become more complex.
Start by factoring it out to a new pl011_write_txdata() function.
No functional change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240719181041.49545-7-philmd@linaro.org>
To be able to reset the RX or TX FIFO separately,
split pl011_reset_fifo() in two.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240719181041.49545-6-philmd@linaro.org>
We'll soon use pl011_loopback_enabled() and pl011_loopback_tx()
from functions defined before their declarations. In order to
avoid forward-declaring them, move them around.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-5-philmd@linaro.org>
Avoid forward-declaring pl011_put_fifo() by moving it earlier.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-4-philmd@linaro.org>
Since its introduction in commit cdbdb648b7 ("ARM Versatile
Platform Baseboard emulation.") PL011State::readbuff as never
been used. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240719181041.49545-3-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-12-philmd@linaro.org>
We just removed the single machine calling etraxfs_dmac_init()
(the axis-dev88 machine).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-11-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-10-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-9-philmd@linaro.org>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-8-philmd@linaro.org>
No more CRIS machine uses cris_load_image(), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-7-philmd@linaro.org>
This machine was deprecated for the v9.0 release in commit
c7bbef4023 ("docs: mark CRIS support as deprecated").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-6-philmd@linaro.org>
sh7750_register_io_device() was only used by the TC58128
NAND EEPROM which has been removed in the previous commit.
Remove it as unused code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20240903153959.18392-4-philmd@linaro.org>
The TC58128 NAND EEPROM is not user creatable and
needs to be instanciated in the code via tc58128_init().
Only the SHIX machine was using it, and it was removed
in the previous commit. Since the TC58128 has no more
users, remove it too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240903153959.18392-3-philmd@linaro.org>
The SHIX machine is deprecated since v9.0 (commit
322b038c94 "target/sh4: Deprecate the shix machine").
Time to remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20240903153959.18392-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-19-philmd@linaro.org>
designware_pcie_root_realize() uses get_system_memory()
as the "host side memory region", as opposed to the "PCI
side" one. Introduce the 'host_mem' variable for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20231012121857.31873-4-philmd@linaro.org>
When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.
Remove a pointless structure declaration in "designware.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20231012121857.31873-2-philmd@linaro.org>
On GICv2 and later, level triggered interrupts are pending when either
the interrupt line is asserted or the interrupt was made pending by a
GICD_ISPENDRn write. Making a level triggered interrupt pending by
software persists until either the interrupt is acknowledged or cleared
by writing GICD_ICPENDRn. As long as the interrupt line is asserted,
the interrupt is pending in any case.
This logic is transparently implemented in gic_test_pending() for
GICv1 and GICv2. The function combines the "pending" irq_state flag
(used for edge triggered interrupts and software requests) and the
line status (tracked in the "level" field). However, we also
incorrectly set the pending flag on a guest write to GICD_ISENABLERn
if the line of a level triggered interrupt was asserted. This keeps
the interrupt pending even if the line is de-asserted after some
time.
This incorrect logic is a leftover of the initial 11MPCore GIC
implementation. That handles things slightly differently to the
architected GICv1 and GICv2. The 11MPCore TRM does not give a lot of
detail on the corner cases of its GIC's behaviour, and historically
we have not wanted to investigate exactly what it does in reality, so
QEMU's GIC model takes the approach of "retain our existing behaviour
for 11MPCore, and implement the architectural standard for later GIC
revisions".
On that basis, commit 8d999995e4 in 2013 is where we added the
"level-triggered interrupt with the line asserted" handling to
gic_test_pending(), and we deliberately kept the old behaviour of
gic_test_pending() for REV_11MPCORE. That commit should have added
the "only if 11MPCore" condition to the setting of the pending bit on
writes to GICD_ISENABLERn, but forgot it.
Add the missing "if REV_11MPCORE" condition, so that our behaviour
on GICv1 and GICv2 matches the GIC architecture requirements.
Cc: qemu-stable@nongnu.org
Fixes: 8d999995e4 ("arm_gic: Fix GIC pending behavior")
Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com>
Message-id: 20240911114826.3558302-1-jan.kloetzke@kernkonzept.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded comment a little and converted to coding-style form;
expanded commit message with the historical backstory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The read index should not be changed when storing a new message into the
RX or TX FIFO. Changing it at this point will cause the reader to get
out of sync. The wrapping of the read index is already handled by the
pre-write functions for the FIFO status registers anyway.
Additionally, the calculation for wrapping the store index was off by
one, which caused new messages to be written to the wrong location in
the FIFO. This caused incorrect messages to be delivered.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240827034927.66659-8-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use QEMU's helper functions can_dlc2len() and can_len2dlc() for
translating between the raw DLC value and the SocketCAN length value.
This also has the side effect of correctly handling received CAN FD
frames with a DLC of 0-8, which was broken previously.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240827034927.66659-7-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The endianness of the CAN data was backwards in each group of 4 bytes.
For example, the following data:
00 11 22 33 44 55 66 77
was showing up like this:
33 22 11 00 77 66 55 44
Fix both the TX and RX code to put the data in the correct order.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-6-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for QEMU_CAN_FRMF_ESI and QEMU_CAN_FRMF_BRS flags, and
ensure frame->flags is always initialized to 0.
Note that the Xilinx IP core doesn't allow manually setting the ESI bit
during transmits, so it's only implemented for the receive case.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-5-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously the emulated CAN ID register was being set to the exact same
value stored in qemu_can_frame.can_id. This doesn't work correctly
because the Xilinx IP core uses a different bit arrangement than
qemu_can_frame for all of its ID registers. Correct this problem for
both RX and TX, including RX filtering.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-4-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When checking the QEMU_CAN_FRMF_TYPE_FD flag, we need to ignore other
potentially set flags. Before this change, received CAN FD frames from
SocketCAN weren't being recognized as CAN FD.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240827034927.66659-3-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interrupt level should be 0 or 1. The existing code was using the
interrupt flags to determine the level. In the only machine currently
supported (xlnx-versal-virt), the GICv3 was masking off all bits except
bit 0 when applying it, resulting in the IRQ never being delivered.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-id: 20240827034927.66659-2-doug@schmorgal.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch's main focus is to use the previously added
hvf_get_physical_address_range to inform VM creation
about the IPA size we need for the VM, so we can extend
the default 36b IPA size and support VMs with 64+GB of
RAM. This is done by freezing the memory map, computing
the highest GPA and then (depending on if the platform
supports an IPA size that large) telling the kernel to
use a size >= for the VM. In pursuit of this a couple of
things related to how we handle the physical address range
we expose to guests were altered, but for an explanation of
what we were doing:
Today, to get the IPA size we were reading id_aa64mmfr0_el1's
PARange field from a newly made vcpu. Unfortunately, HVF just
returns the hosts PARange directly for the initial value and
not the IPA size that will actually back the VM, so we believe
we have much more address space than we actually do today it seems.
Starting in macOS 13.0 some APIs were introduced to be able to
query the maximum IPA size the kernel supports, and to set the IPA
size for a given VM. However, this still has a couple of issues
on < macOS 15. Up until macOS 15 (and if the hardware supported
it) the max IPA size was 39 bits which is not a valid PARange
value, so we can't clamp down what we advertise in the vcpu's
id_aa64mmfr0_el1 to our IPA size. Starting in macOS 15 however,
the maximum IPA size is 40 bits (if it's supported in the hardware
as well) which is also a valid PARange value so we can set our IPA
size to the maximum as well as clamp down the PARange we advertise
to the guest. This allows VMs with 64+ GB of RAM and should fix the
oddness of the PARange situation as well.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-4-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This addition will be necessary for some HVF related work to follow.
For HVF on ARM there exists a set of APIs in macOS 13 to be able to
adjust the IPA size for a given VM. This is useful as by default HVF
uses 36 bits as the IPA size, so to support guests with > 64GB of RAM
we'll need to reach for this.
To have all the info necessary to carry this out however, we need some
plumbing to be able to grab the memory map and compute the highest GPA
prior to creating the VM. This is almost exactly like what kvm_type is
used for on ARM today, and is also what this will be used for. We will
compute the highest GPA and find what IPA size we'd need to satisfy this,
and if it's valid (macOS today caps at 40b) we'll set this to be the IPA
size in coming patches. This new method is only needed (today at least)
on ARM, and obviously only for HVF/macOS, so admittedly it is much less
generic than kvm_type today, but it seemed a somewhat sane way to get
the information we need from the memmap at VM creation time.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-2-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed explicit setting of field to NULL on x86]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We used to need the transitional_function machinery to handle bus
classes and device classes which still used their legacy reset
handling. We have now converted all bus classes to three phase
reset, and simplified the device class legacy reset so it is just an
adapting wrapper function around registration of a hold phase method.
There are therefore no more users of the transitional_function
machinery and we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240830145812.1967042-12-peter.maydell@linaro.org
Now that all devices which still implement a the legacy reset method
register it via device_class_legacy_reset(), we can simplify the
handling of these devices. Instead of using the complex
Resettable::get_transitional_function machinery, we register a hold
phase method which invokes the DeviceClass::legacy_reset method.
This will allow us to remove all the get_transitional_function
handling from resettable.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240830145812.1967042-11-peter.maydell@linaro.org
Currently we have transitional machinery between legacy reset
and three phase reset that works in two directions:
* if you invoke three phase reset on a device which has set
the DeviceClass::legacy_reset method, we detect this in
device_get_transitional_reset() and arrange that we call
the legacy_reset method during the hold phase of reset
* if you invoke legacy reset on a device which implements
three phase reset, the default legacy_reset method is
device_phases_reset(), which does a three-phase reset
of the device
However, we have now eliminated all the places which could invoke
legacy reset on a device, which means that the function
device_phases_reset() is never called -- it serves only as the value
of DeviceClass::legacy_reset that indicates that the subclass never
overrode the legacy reset method. So we can delete it, and instead
check for legacy_reset != NULL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-10-peter.maydell@linaro.org
Rename the DeviceClass::reset field to legacy_reset; this is helpful
both in flagging up that it's best not used in new code and in
making it easy to search for where it's being used still.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-9-peter.maydell@linaro.org
Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
Define a device_class_set_legacy_reset() function which
sets the DeviceClass::reset field. This serves two purposes:
* it makes it clearer to the person writing code that
DeviceClass::reset is now legacy and they should look for
the new alternative (which is Resettable)
* it makes it easier to rename the reset field (which in turn
makes it easier to find places that call it)
The Coccinelle script can be used to automatically convert code that
was doing an open-coded assignment to DeviceClass::reset to call
device_class_set_legacy_reset() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-7-peter.maydell@linaro.org
There are no callers of device_class_set_parent_reset() left in the tree,
as they've all been converted to use three-phase reset and the
corresponding resettable_class_set_parent_phases() function.
Remove device_class_set_parent_reset().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-5-peter.maydell@linaro.org
Convert the virtio-ccw code to three-phase reset. This allows us to
remove a call to device_class_set_parent_reset(), replacing it with
the three-phase equivalent resettable_class_set_parent_phases().
Removing all the device_class_set_parent_reset() uses will allow us
to remove some of the glue code that interworks between three-phase
and legacy reset.
This is a simple conversion, with no behavioural changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-3-peter.maydell@linaro.org
Convert the TYPE_CCW_DEVICE to three-phase reset. This is a
device class which is subclassed, so it needs to be three-phase
before we can convert the subclass.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240830145812.1967042-2-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
+OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
=Plwu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240912
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZuLmLgAKCRBAov/yOSY+
# 38JNA/9UdorT4a7H+H5PhNeEu2EHDgMPb7+gxyYKw03mOG2MB3KFzkK0LRQShaPt
# ADJmIqAFlc9SJLkbo6ELMDl+ZnUU9OdC/P6YU5iBG71zx1PonMwuyJTWhlBwxWcG
# +OB8aDBUALoe/Gb4za152I84cR08g58TgLnXNfEkCM8lnPfAug==
# =Plwu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 Sep 2024 14:01:34 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240912' of https://gitlab.com/gaosong/qemu:
hw/loongarch: Add acpi SPCR table support
hw/loongarch: virt: pass random seed to fdt
hw/loongarch: virt: support up to 4 serial ports
target/loongarch: Support QMP dump-guest-memory
target/loongarch/kvm: Add vCPU reset function
hw/loongarch: Remove default enable with VIRTIO_VGA device
target/loongarch: Add compatible support about VM reboot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pierrick Bouvier