This generalizes the rule to generate the skeleton and allows to add
another.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This saves branches and makes later BPF program changes easier.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The kernel interprets the returned value as an unsigned 32-bit so -1
will mean queue 4294967295, which is awkward. Return 0 instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
calculate_rss_hash() was using hash value 0 to tell if it calculated
a hash, but the hash value may be 0 on a rare occasion. Have a
distinct bool value for correctness.
Fixes: f3fa412de2 ("ebpf: Added eBPF RSS program.")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The peer buffer is qualified with const and not meant to be modified.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The member is not cleared during reset so may have a stale value.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The code to attach or detach the eBPF program to RSS were duplicated so
unify them into one function to save some code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
RSS is disabled by default.
Fixes: 590790297c ("virtio-net: implement RSS configuration command")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Byte swapping is only performed for the part of header shared with the
legacy standard and the buffer only needs to cover it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The copied header is only used for byte swapping.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Multiqueue usage is not negotiated yet when realizing. If more than
one queue is added and the guest never requests to enable multiqueue,
the extra queues will not be deleted when unrealizing and leak.
Fixes: f9d6dbf0bf ("virtio-net: remove virtio queues if the guest doesn't support multiqueue")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Propagating ebpf-rss-fds errors has several problems.
First, it makes device realization fail and disables the fallback to the
conventional eBPF loading.
Second, it leaks memory by making device realization fail without
freeing memory already allocated.
Third, the convention is to set an error when a function returns false,
but virtio_net_load_ebpf_fds() and virtio_net_load_ebpf() returns false
without setting an error, which is confusing.
Remove the propagation to fix these problems.
Fixes: 0524ea0510 ("ebpf: Added eBPF initialization by fds.")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
tap prepends a zeroed virtio-net header when writing a packet to a
tap with virtio-net header enabled but not in use. This only happens
when s->host_vnet_hdr_len == sizeof(struct virtio_net_hdr).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This will save duplicate logic found in both of tap_receive_iov() and
tap_receive().
Suggested-by: "Zhang, Chen" <chen.zhang@intel.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While netmap implements virtio-net header, it does not implement
receive_raw(). Instead of implementing receive_raw for netmap, add
virtio-net headers in the common code and use receive_iov()/receive()
instead. This also fixes the buffer size for the virtio-net header.
Fixes: fbbdbddec0 ("tap: allow extended virtio header with hash info")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The virtio-net header length assertion should happen for any clients.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since qemu_set_vnet_hdr_len() is always called when
qemu_using_vnet_hdr() is called, we can merge them and save some code.
For consistency, express that the virtio-net header is not in use by
returning 0 with qemu_get_vnet_hdr_len() instead of having a dedicated
function, qemu_get_using_vnet_hdr().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It was necessary since an Linux older than 2.6.35 may implement the
virtio-net header but may not allow to change its length. Remove it
since such an old Linux is no longer supported.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs.nto
* Implement SBI debug console (DBCN) calls for KVM
* Support 64-bit addresses for initrd
* Change RISCV_EXCP_SEMIHOST exception number to 63
* Tolerate KVM disable ext errors
* Set tval in breakpoints
* Add support for Zve32x extension
* Add support for Zve64x extension
* Relax vector register check in RISCV gdbstub
* Fix the element agnostic Vector function problem
* Fix Zvkb extension config
* Implement dynamic establishment of custom decoder
* Add th.sxstatus CSR emulation
* Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
* Check single width operator for vector fp widen instructions
* Check single width operator for vfncvt.rod.f.f.w
* Remove redudant SEW checking for vector fp narrow/widen instructions
* Prioritize pmp errors in raise_mmu_exception()
* Do not set mtval2 for non guest-page faults
* Remove experimental prefix from "B" extension
* Fixup CBO extension register calculation
* Fix the hart bit setting of AIA
* Fix reg_width in ricsv_gen_dynamic_vector_feature()
* Decode all of the pmpcfg and pmpaddr CSRs
-----BEGIN PGP SIGNATURE-----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=mtVb
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.1
* APLICs add child earlier than realize
* Fix exposure of Zkr
* Raise exceptions on wrs.nto
* Implement SBI debug console (DBCN) calls for KVM
* Support 64-bit addresses for initrd
* Change RISCV_EXCP_SEMIHOST exception number to 63
* Tolerate KVM disable ext errors
* Set tval in breakpoints
* Add support for Zve32x extension
* Add support for Zve64x extension
* Relax vector register check in RISCV gdbstub
* Fix the element agnostic Vector function problem
* Fix Zvkb extension config
* Implement dynamic establishment of custom decoder
* Add th.sxstatus CSR emulation
* Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
* Check single width operator for vector fp widen instructions
* Check single width operator for vfncvt.rod.f.f.w
* Remove redudant SEW checking for vector fp narrow/widen instructions
* Prioritize pmp errors in raise_mmu_exception()
* Do not set mtval2 for non guest-page faults
* Remove experimental prefix from "B" extension
* Fixup CBO extension register calculation
* Fix the hart bit setting of AIA
* Fix reg_width in ricsv_gen_dynamic_vector_feature()
* Decode all of the pmpcfg and pmpaddr CSRs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmZdVzcACgkQr3yVEwxT
# gBPxSBAAsuzhDCbaOl9jXhIL6Q0IDHULz4U16AZypHYID7T6rDaNoRmNVdqBKZuM
# IMby8qm5XFmcUGM9itcM7IKV2BNHuWSye3/Y7GOYZQyToR7U6lvLpAm4pNj4AgTC
# PLV2VPt1XLZRSthkgwp6ylBXzdNSiZMWggqTb7QbyfR5hJfG+VsZjTGaIwyZbtKI
# +CJG6gZSPv6JGNtwnJq+v0VBEkj1ryo/gg2EAAzA+EWU4nw5mJCLWoDLrYZalTv9
# vCTqJuMViTjeHqAm/IIMoFzYR94+ug0usqcmnx/E7ALTOsmBh5K+KWndAW4vqAlP
# mZOONfr3h7zc81jThC961kjGVPiTjTGbHHlKwlB2JEggwctcVqGRyWeM9wHSUr2W
# S6F56hpForzVW9IkCt/fDUxamr23303s5miIsronrwiihqkNpxKYAuqPTXFGkFKg
# ilBLGcbHcWxNmjpfIEXnTjDB6qFEceWqbjJejrsKusoSPkKQm0ktIZZUwCbTsu45
# 0ScYrBieUPjDWDFYlmWrr5byekyCXCzfpBgq8qo60FA+aP29Nx+GlFR0eWTXXY4V
# O5/WTKjQM4+/uNYIuFDCFPV1Ja5GERDhXoNkjkY5ErsSZL2c2UEp3UTxzbEl5dOm
# NRH7C26Z/xVMDwT08kDDq0t8Rkz4836txPO7y+aPbtvGfENRI8E=
# =mtVb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Jun 2024 12:40:07 AM CDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240603' of https://github.com/alistair23/qemu: (27 commits)
disas/riscv: Decode all of the pmpcfg and pmpaddr CSRs
riscv, gdbstub.c: fix reg_width in ricsv_gen_dynamic_vector_feature()
target/riscv/kvm.c: Fix the hart bit setting of AIA
target/riscv: rvzicbo: Fixup CBO extension register calculation
target/riscv: Remove experimental prefix from "B" extension
target/riscv: do not set mtval2 for non guest-page faults
target/riscv: prioritize pmp errors in raise_mmu_exception()
target/riscv: rvv: Remove redudant SEW checking for vector fp narrow/widen instructions
target/riscv: rvv: Check single width operator for vfncvt.rod.f.f.w
target/riscv: rvv: Check single width operator for vector fp widen instructions
target/riscv: rvv: Fix Zvfhmin checking for vfwcvt.f.f.v and vfncvt.f.f.w instructions
riscv: thead: Add th.sxstatus CSR emulation
target/riscv: Implement dynamic establishment of custom decoder
target/riscv/cpu.c: fix Zvkb extension config
target/riscv: Fix the element agnostic function problem
target/riscv: Relax vector register check in RISCV gdbstub
target/riscv: Add support for Zve64x extension
target/riscv: Add support for Zve32x extension
trans_privileged.c.inc: set (m|s)tval on ebreak breakpoint
target/riscv/debug: set tval=pc in breakpoint exceptions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prevent regressions when using NBD with TLS in the presence of
iothreads, adding coverage the fix to qio channels made in the
previous patch.
The shell function pick_unused_port() was copied from
nbdkit.git/tests/functions.sh.in, where it had all authors from Red
Hat, agreeing to the resulting relicensing from 2-clause BSD to GPLv2.
CC: qemu-stable@nongnu.org
CC: "Richard W.M. Jones" <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240531180639.1392905-6-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds support for MCQ defined in UFSHCI 4.0. This patch
utilized the legacy I/O codes as much as possible to support MCQ.
MCQ operation & runtime register is placed at 0x1000 offset of UFSHCI
register statically with no spare space among four registers (48B):
UfsMcqSqReg, UfsMcqSqIntReg, UfsMcqCqReg, UfsMcqCqIntReg
The maxinum number of queue is 32 as per spec, and the default
MAC(Multiple Active Commands) are 32 in the device.
Example:
-device ufs,serial=foo,id=ufs0,mcq=true,mcq-maxq=8
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-3-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
This patch is a prep patch for the following MCQ support patch for
hw/ufs. This patch updated minimal mandatory fields to support MCQ
based on UFSHCI 4.0.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-2-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Previously we only listed a single pmpcfg CSR and the first 16 pmpaddr
CSRs. This patch fixes this to list all 16 pmpcfg and all 64 pmpaddr
CSRs are part of the disassembly.
Reported-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fixes: ea10325917 ("RISC-V Disassembler")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240514051615.330979-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 33a24910ae changed 'reg_width' to use 'vlenb', i.e. vector length
in bytes, when in this context we want 'reg_width' as the length in
bits.
Fix 'reg_width' back to the value in bits like 7cb59921c0
("target/riscv/gdbstub.c: use 'vlenb' instead of shifting 'vlen'") set
beforehand.
While we're at it, rename 'reg_width' to 'bitsize' to provide a bit more
clarity about what the variable represents. 'bitsize' is also used in
riscv_gen_dynamic_csr_feature() with the same purpose, i.e. as an input to
gdb_feature_builder_append_reg().
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Robin Dapp <rdapp.gcc@gmail.com>
Fixes: 33a24910ae ("target/riscv: Use GDBFeature for dynamic XML")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240517203054.880861-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In AIA spec, each hart (or each hart within a group) has a unique hart
number to locate the memory pages of interrupt files in the address
space. The number of bits required to represent any hart number is equal
to ceil(log2(hmax + 1)), where hmax is the largest hart number among
groups.
However, if the largest hart number among groups is a power of 2, QEMU
will pass an inaccurate hart-index-bit setting to Linux. For example, when
the guest OS has 4 harts, only ceil(log2(3 + 1)) = 2 bits are sufficient
to represent 4 harts, but we passes 3 to Linux. The code needs to be
updated to ensure accurate hart-index-bit settings.
Additionally, a Linux patch[1] is necessary to correctly recover the hart
index when the guest OS has only 1 hart, where the hart-index-bit is 0.
[1] https://lore.kernel.org/lkml/20240415064905.25184-1-yongxuan.wang@sifive.com/t/
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240515091129.28116-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When running the instruction
```
cbo.flush 0(x0)
```
QEMU would segfault.
The issue was in cpu_gpr[a->rs1] as QEMU does not have cpu_gpr[0]
allocated.
In order to fix this let's use the existing get_address()
helper. This also has the benefit of performing pointer mask
calculations on the address specified in rs1.
The pointer masking specificiation specifically states:
"""
Cache Management Operations: All instructions in Zicbom, Zicbop and Zicboz
"""
So this is the correct behaviour and we previously have been incorrectly
not masking the address.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: Fabian Thomas <fabian.thomas@cispa.de>
Fixes: e05da09b7c ("target/riscv: implement Zicbom extension")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240514023910.301766-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This extension has now been ratified:
https://jira.riscv.org/browse/RVS-2006 so the "x-" prefix can be
removed.
Since this is now a ratified extension add it to the list of extensions
included in the "max" CPU variant.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240514110217.22516-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Previous patch fixed the PMP priority in raise_mmu_exception() but we're still
setting mtval2 incorrectly. In riscv_cpu_tlb_fill(), after pmp check in 2 stage
translation part, mtval2 will be set in case of successes 2 stage translation but
failed pmp check.
In this case we gonna set mtval2 via env->guest_phys_fault_addr in context of
riscv_cpu_tlb_fill(), as this was a guest-page-fault, but it didn't and mtval2
should be zero, according to RISCV privileged spec sect. 9.4.4: When a guest
page-fault is taken into M-mode, mtval2 is written with either zero or guest
physical address that faulted, shifted by 2 bits. *For other traps, mtval2
is set to zero...*
Signed-off-by: Alexei Filippov <alexei.filippov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240503103052.6819-1-alexei.filippov@syntacore.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
raise_mmu_exception(), as is today, is prioritizing guest page faults by
checking first if virt_enabled && !first_stage, and then considering the
regular inst/load/store faults.
There's no mention in the spec about guest page fault being a higher
priority that PMP faults. In fact, privileged spec section 3.7.1 says:
"Attempting to fetch an instruction from a PMP region that does not have
execute permissions raises an instruction access-fault exception.
Attempting to execute a load or load-reserved instruction which accesses
a physical address within a PMP region without read permissions raises a
load access-fault exception. Attempting to execute a store,
store-conditional, or AMO instruction which accesses a physical address
within a PMP region without write permissions raises a store
access-fault exception."
So, in fact, we're doing it wrong - PMP faults should always be thrown,
regardless of also being a first or second stage fault.
The way riscv_cpu_tlb_fill() and get_physical_address() work is
adequate: a TRANSLATE_PMP_FAIL error is immediately reported and
reflected in the 'pmp_violation' flag. What we need is to change
raise_mmu_exception() to prioritize it.
Reported-by: Joseph Chan <jchan@ventanamicro.com>
Fixes: 82d53adfbb ("target/riscv/cpu_helper.c: Invalid exception on MMU translation stage")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240413105929.7030-1-alexei.filippov@syntacore.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the checking functions check both the single and double width
operators at the same time, then the single width operator checking
functions (require_rvf[min]) will check whether the SEW is 8.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The opfv_narrow_check needs to check the single width float operator by
require_rvf.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The require_scale_rvf function only checks the double width operator for
the vector floating point widen instructions, so most of the widen
checking functions need to add require_rvf for single width operator.
The vfwcvt.f.x.v and vfwcvt.f.xu.v instructions convert single width
integer to double width float, so the opfxv_widen_check function doesn’t
need require_rvf for the single width operator(integer).
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According v spec 18.4, only the vfwcvt.f.f.v and vfncvt.f.f.w
instructions will be affected by Zvfhmin extension.
And the vfwcvt.f.f.v and vfncvt.f.f.w instructions only support the
conversions of
* From 1*SEW(16/32) to 2*SEW(32/64)
* From 2*SEW(32/64) to 1*SEW(16/32)
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240322092600.1198921-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The th.sxstatus CSR can be used to identify available custom extension
on T-Head CPUs. The CSR is documented here:
https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadsxstatus.adoc
An important property of this patch is, that the th.sxstatus MAEE field
is not set (indicating that XTheadMae is not available).
XTheadMae is a memory attribute extension (similar to Svpbmt) which is
implemented in many T-Head CPUs (C906, C910, etc.) and utilizes bits
in PTEs that are marked as reserved. QEMU maintainers prefer to not
implement XTheadMae, so we need give kernels a mechanism to identify
if XTheadMae is available in a system or not. And this patch introduces
this mechanism in QEMU in a way that's compatible with real HW
(i.e., probing the th.sxstatus.MAEE bit).
Further context can be found on the list:
https://lists.gnu.org/archive/html/qemu-devel/2024-02/msg00775.html
Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-ID: <20240429073656.2486732-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In this patch, we modify the decoder to be a freely composable data
structure instead of a hardcoded one. It can be dynamically builded up
according to the extensions.
This approach has several benefits:
1. Provides support for heterogeneous cpu architectures. As we add decoder in
RISCVCPU, each cpu can have their own decoder, and the decoders can be
different due to cpu's features.
2. Improve the decoding efficiency. We run the guard_func to see if the decoder
can be added to the dynamic_decoder when building up the decoder. Therefore,
there is no need to run the guard_func when decoding each instruction. It can
improve the decoding efficiency
3. For vendor or dynamic cpus, it allows them to customize their own decoder
functions to improve decoding efficiency, especially when vendor-defined
instruction sets increase. Because of dynamic building up, it can skip the other
decoder guard functions when decoding.
4. Pre patch for allowing adding a vendor decoder before decode_insn32() with minimal
overhead for users that don't need this particular vendor decoder.
Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com>
Suggested-by: Christoph Muellner <christoph.muellner@vrull.eu>
Co-authored-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240506023607.29544-1-eric.huang@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This code has a typo that writes zvkb to zvkg, causing users can't
enable zvkb through the config. This patch gets this fixed.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Fixes: ea61ef7097 ("target/riscv: Move vector crypto extensions to riscv_cpu_extensions")
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Weiwei Li <liwei1518@gmail.com>
Message-ID: <tencent_7E34EEF0F90B9A68BF38BEE09EC6D4877C0A@qq.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In RVV and vcrypto instructions, the masked and tail elements are set to 1s
using vext_set_elems_1s function if the vma/vta bit is set. It is the element
agnostic policy.
However, this function can't deal the big endian situation. This patch fixes
the problem by adding handling of such case.
Signed-off-by: Huang Tao <eric.huang@linux.alibaba.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240325021654.6594-1-eric.huang@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In current implementation, the gdbstub allows reading vector registers
only if V extension is supported. However, all vector extensions and
vector crypto extensions have the vector registers and they all depend
on Zve32x. The gdbstub should check for Zve32x instead.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Message-ID: <20240328022343.6871-4-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve64x extension. Enabling Zve64f enables Zve64x and
enabling Zve64x enables Zve32x according to their dependency.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2107
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-3-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for Zve32x extension and replace some checks for Zve32f with
Zve32x, since Zve32f depends on Zve32x.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240328022343.6871-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Privileged spec section 4.1.9 mentions:
"When a trap is taken into S-mode, stval is written with
exception-specific information to assist software in handling the trap.
(...)
If stval is written with a nonzero value when a breakpoint,
address-misaligned, access-fault, or page-fault exception occurs on an
instruction fetch, load, or store, then stval will contain the faulting
virtual address."
A similar text is found for mtval in section 3.1.16.
Setting mtval/stval in this scenario is optional, but some softwares read
these regs when handling ebreaks.
Write 'badaddr' in all ebreak breakpoints to write the appropriate
'tval' during riscv_do_cpu_interrrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240416230437.1869024-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're not setting (s/m)tval when triggering breakpoints of type 2
(mcontrol) and 6 (mcontrol6). According to the debug spec section
5.7.12, "Match Control Type 6":
"The Privileged Spec says that breakpoint exceptions that occur on
instruction fetches, loads, or stores update the tval CSR with either
zero or the faulting virtual address. The faulting virtual address for
an mcontrol6 trigger with action = 0 is the address being accessed and
which caused that trigger to fire."
A similar text is also found in the Debug spec section 5.7.11 w.r.t.
mcontrol.
Note that what we're doing ATM is not violating the spec, but it's
simple enough to set mtval/stval and it makes life easier for any
software that relies on this info.
Given that we always use action = 0, save the faulting address for the
mcontrol and mcontrol6 trigger breakpoints into env->badaddr, which is
used as as scratch area for traps with address information. 'tval' is
then set during riscv_cpu_do_interrupt().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240416230437.1869024-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Running a KVM guest using a 6.9-rc3 kernel, in a 6.8 host that has zkr
enabled, will fail with a kernel oops SIGILL right at the start. The
reason is that we can't expose zkr without implementing the SEED CSR.
Disabling zkr in the guest would be a workaround, but if the KVM doesn't
allow it we'll error out and never boot.
In hindsight this is too strict. If we keep proceeding, despite not
disabling the extension in the KVM vcpu, we'll not add the extension in
the riscv,isa. The guest kernel will be unaware of the extension, i.e.
it doesn't matter if the KVM vcpu has it enabled underneath or not. So
it's ok to keep booting in this case.
Change our current logic to not error out if we fail to disable an
extension in kvm_set_one_reg(), but show a warning and keep booting. It
is important to throw a warning because we must make the user aware that
the extension is still available in the vcpu, meaning that an
ill-behaved guest can ignore the riscv,isa settings and use the
extension.
The case we're handling happens with an EINVAL error code. If we fail to
disable the extension in KVM for any other reason, error out.
We'll also keep erroring out when we fail to enable an extension in KVM,
since adding the extension in riscv,isa at this point will cause a guest
malfunction because the extension isn't enabled in the vcpu.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422171425.333037-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current semihost exception number (16) is a reserved number (range
[16-17]). The upcoming double trap specification uses that number for
the double trap exception. Since the privileged spec (Table 22) defines
ranges for custom uses change the semihosting exception number to 63
which belongs to the range [48-63] in order to avoid any future
collisions with reserved exception.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240422135840.1959967-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use qemu_fdt_setprop_u64() instead of qemu_fdt_setprop_cell()
to set the address of initrd in FDT to support 64-bit address.
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <tencent_A4482251DD0890F312758FA6B33F60815609@qq.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SBI defines a Debug Console extension "DBCN" that will, in time, replace
the legacy console putchar and getchar SBI extensions.
The appeal of the DBCN extension is that it allows multiple bytes to be
read/written in the SBI console in a single SBI call.
As far as KVM goes, the DBCN calls are forwarded by an in-kernel KVM
module to userspace. But this will only happens if the KVM module
actually supports this SBI extension and we activate it.
We'll check for DBCN support during init time, checking if get-reg-list
is advertising KVM_RISCV_SBI_EXT_DBCN. In that case, we'll enable it via
kvm_set_one_reg() during kvm_arch_init_vcpu().
Finally, change kvm_riscv_handle_sbi() to handle the incoming calls for
SBI_EXT_DBCN, reading and writing as required.
A simple KVM guest with 'earlycon=sbi', running in an emulated RISC-V
host, takes around 20 seconds to boot without using DBCN. With this
patch we're taking around 14 seconds to boot due to the speed-up in the
terminal output. There's no change in boot time if the guest isn't
using earlycon.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240425155012.581366-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implementing wrs.nto to always just return is consistent with the
specification, as the instruction is permitted to terminate the
stall for any reason, but it's not useful for virtualization, where
we'd like the guest to trap to the hypervisor in order to allow
scheduling of the lock holding VCPU. Change to always immediately
raise exceptions when the appropriate conditions are present,
otherwise continue to just return. Note, immediately raising
exceptions is also consistent with the specification since the
time limit that should expire prior to the exception is
implementation-specific.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240424142808.62936-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zkr extension may only be exposed to KVM guests if the VMM
implements the SEED CSR. Use the same implementation as TCG.
Without this patch, running with a KVM which does not forward the
SEED CSR access to QEMU will result in an ILL exception being
injected into the guest (this results in Linux guests crashing on
boot). And, when running with a KVM which does forward the access,
QEMU will crash, since QEMU doesn't know what to do with the exit.
Fixes: 3108e2f1c6 ("target/riscv/kvm: update KVM exts to Linux 6.8")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240422134605.534207-2-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since only root APLICs can have hw IRQ lines, aplic->parent should
be initialized first.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-ID: <20240409014445.278-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Akihiko Odaki