Only the POWER[789] CPUs should have the ARCH_206 bit set. This is what the
linux kernel does. I guess this was also the intention of commit 0e019746.
We have to make sure all *206 bits are set.
Before this patch, the flags check in the GET_FEATURES2 macro returned true
if _any_ bit was set. This worked well as long as there was only one bit
set in the 'flag' parameter. But as explained before, we have to make sure
all bits in the 'flag' parameter are set.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently refuses to start with KVM-PR and only prints out
qemu: fatal: Unknown MMU model 851972
when being started there. This is because commit 4322e8ced5
("ppc: Fix 64K pages support in full emulation") introduced a new
POWERPC_MMU_64K bit to indicate support for this page size, but
it never gets cleared on KVM-PR if the host kernel does not support
this. Thus we've got to turn off this bit in the mmu_model for KVM-PR.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will make life easier for dealing with dynamically configured
ICSes such as PHB3
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix inconsistent irq status, because of this in the trace logs, for e.g.
LSI status was 0x7, i.e. XICS_STATUS_ASSERTED, XICS_STATUS_SENT and
XICS_STATUS_REJECTED all set, which did not make sense. So the REJECTED
would have been set in earlier interrupt cycle, and then asserted and
sent in this current one.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are mandatory per PAPR and available on Linux 4.3 and newer kernels. The calls in question are required to run FreeBSD guests with reasonable performance, so enable them if possible.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
[dwg: Added a stub to fix compile without KVM (e.g. on x86 host)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
tlbie (BookS) and tlbivax (BookE) plus the H_CALLs(pseries) should have
a global effect.
Introduces TLB_NEED_GLOBAL_FLUSH flag. During lazy tlb flush, after
taking care of pending local flushes, check broadcast flush(at context
synchronizing event ptesync/tlbsync, etc) is needed. Depending on the
bitmask state of the tlb_need_flush, tlb is flushed from other cpus if
needed and the flags are cleared.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Use 'true' instead of '1' for call to check_tlb_flush()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We flush the qemu TLB lazily. check_tlb_flush is called whenever we hit
a context synchronizing event or instruction that requires a pending
flush to be performed.
However, we fail to handle broadcast TLB flush operations. In order to
fix that efficiently, we want to differentiate whether check_tlb_flush()
needs to only apply pending local flushes (isync instructions,
interrupts, ...) or also global pending flush operations. The latter is
only needed when executing instructions that are defined architecturally
as synchronizing global TLB flush operations. This in our case is
ptesync on BookS and tlbsync on BookE along with the paravirtualized
hypervisor calls.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Changed gen_check_tlb_flush() to also take a bool, and fixed
some spelling errors in commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduces bit-flag in CPUPPCState::tlb_need_flush:
TLB_NEED_LOCAL_FLUSH (0x1) - Flush local tlb
This would indicate a pending local tlb flush (isync instructions,
interrupts, ...)
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Each spapr cpu core type defines an instance_init routine which just
populates the CPU class name. This can be done in the class_init
commonly for all core types which simplifies the registration.
This is inspired by how PowerNV core types are registered.
Certain types of spapr cpu cores ('host' and generic type based on host
CPU) are initialized in target-ppc/kvm.c. To convert these type
registrations to use class_init, we need to expose
spapr_cpu_core_class_init() outside of spapr_cpu_core.c.
Commit d11b268e17 added a generic sPAPR CPU core family
type to support cases like POWER8 CPU type on POWER8E host CPU.
Switching to class_init would fix such scenarios to use the right
CPU thread type instead of defaulting to host-powerpc64-cpu.
In an unrelated cleanup, fix a typo in .get_hotplug_handler routine.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
darn: Deliver A Random Number
Currently return invalid random number for all the case. This needs
proper algorithm to provide cryptographically suitable random data.
Reading from /dev/random can block and that is not an expected behaviour
while the cpu instruction is getting executed. Moreover, /dev/random
would only work for linux-user
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Added minor clang warning fix for ppc32 target]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
stxsibx - Store VSX Scalar as Integer Byte Indexed
stxsihx - Store VSX Scalar as Integer Halfword Indexed
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xxspltib: VSX Vector Splat Immediate Byte
Copy the immediate byte in each byte of target VSR
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use tcg_gen_qemu_st store conditional instructions.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Being a 16byte operation, qemu_ld/st still does not support this. Move
this out so other store operation can use qemu_ld/st in the following
patch. Also, convert it to two MO_Q operations for stqcx.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use tcg_gen_qemu_ld in the load with reservation instructions.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make byte-swap routines use the common GEN_QEMU_STORE macro
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use macro for st64 as well, this changes the function signature from
gen_qemu_st64 => gen_qemu_st64_i64. Replace this at all the call sites.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement macro to consolidate store operations using newer
tcg_gen_qemu_st function.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make byte-swap routines use the common GEN_QEMU_LOAD macro
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use macro for ld64 as well, this changes the function signature from
gen_qemu_ld64 => gen_qemu_ld64_i64. Replace this at all the call sites.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement macro to consolidate load operations using newer
tcg_gen_qemu_ld functions.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The NO_KEY value should not be sent to the guest. This patch drops that value.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The original pc_to_adb_keycode mapping did have several keys that were
incorrectly mapped. This patch fixes these mappings.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The old pc scancode translation is replaced with QEMU's QKeyCode. This is just
a mechanical substitution, which a number of broken mappings left in.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add the adb-keys.h file. It maps ADB transition key codes with values.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a first test to validate the protocol:
- rtas/get-time-of-day compares the time
from the guest with the time from the host.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Define spapr_alloc_init()/spapr_alloc_init_flags()/spapr_alloc_uninit()
to allocate and use SPAPR guest memory
Define qtest_spapr_vboot()/qtest_spapr_boot()/qtest_spapr_shutdown()
to start SPAPR guest with QOSState initialized for it (memory management)
Move qtest_irq_intercept_in() from generic part to PC part.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Check the result of qemu_strtoXX() and assert
if the string cannot be converted.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There were a number of bugs in the implementation:
- The structure alignment was wrong for 64-bit.
- Also 64-bit only does RT signals.
- On 64-bit, we need to put a pointer to the (aligned) vector registers
in the frame and use it for restoring
- We had endian bugs when saving/restoring vector registers
- My recent fixes for exception NIP broke sigreturn in user mode
causing us to resume one instruction too far.
- Add VSR second halves
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add vpermr instruction from ISA 3.0.
Signed-off-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add vbpermd instruction from ISA 3.0.
Signed-off-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Power ISA 2.x has deleted the rfi instruction and rfid shoud be used
instead on cpus following this instruction set or later.
This will raise an invalid exception when rfi is used on such
processors: Book3S 64-bit processors.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: the required fix in openbios, commit b747b6acc272 ('ppc: use
rfid when running under a CPU from the 970 family.'), is now
merged in qemu under commit 5cebd885d0 ('Update OpenBIOS
images to b747b6a built from submodule.') ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are some powerpc related files in the QEMU source tree
which are currently not covered by the MAINTAINERS file and
thus not properly classified by the get_maintainer.pl script.
So let's add them to the proper sections.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAV+PJ7bRIkN7ePJvAAQjvYRAAnX95B4PPTzCCImLUOsAWg/B6ImlZ1YFG
d7SVCXyjbyCvoP4/tgHuajYUTHiIQ9H7mCyZXJWSkqO/h23TFrbtxofN0e+dWl1s
t+Hot7y/WqRKnuZoXy+ww8Oc0uyEQYoPMlhaPz8CqNxnKPaihBVVWbWFn+yDp0k9
DMfsEqUWQ+/kLkaMpOzInDbuZDAq8/36MUE/cw1+rFZ3MYYs9TSHwVxgXZjX89Cs
d2xyNj8hxlQDfcG9rWWS7UrqzYqejD9j3cuvP7Q874aXdIPDIHkEbRGPVIPdYen7
QaIJ0xOpryaOqRmGW5+sLkoQFDTo6FOOxGB0MsKOghSSdv8ET+W0+Y+hTC637FEO
Eqj2OtrKvN/TlTRV6fDqfov5NXbM63N1rRQdondLUopSnGal7FBIkZL7WfSyYzif
DTkLwtff3dNiOM7gLPC3tP9BTSdQuXvSXHeqDVHvtopQa04IwE3LD4DbBQdMj5BU
MzmdVgwW2kkWej5BKlIrG3JzhKe6u2E/S3MPd3z6lJzERdaIgJIoZv1W2lJOSAaO
aw0E1BOcQLMGSjdh2Gj+La3YVZeMqu2gMyqPS6vjd6UzyTfu8i1AR1bGtYeacZSz
jEfFcMESo7WjpbsrA5V8ch5Hw95s0YU3qhsG3AsDjj9ChE9QKj7v3wYJY2l9Fi4t
UY3zOajB0eY=
=w4/p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160915' into staging
linux-user changes since 2.7 release
# gpg: Signature made Thu 22 Sep 2016 13:09:17 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0
* remotes/riku/tags/pull-linux-user-20160915: (26 commits)
linux-user: fix TARGET_NR_select
linux-user: Fix incorrect offset of tuc_stack in ARM do_sigframe_return_v2
linux-user: Sanity check clone flags
linux-user: Remove unnecessary nptl_flags variable from do_fork()
linux-user: Implement force_sigsegv() via force_sig()
linux-user: SIGSEGV from sigreturn need not be fatal
linux-user: ARM: Give SIGSEGV if signal frame setup fails
linux-user: SIGSEGV on signal entry need not be fatal
linux-user: Pass si_type information to queue_signal() explicitly
linux-user: Recheck for pending synchronous signals too
linux-user: ppc64: set MSR_CM bit for BookE 2.06 MMU
linux-user: Use correct target SHMLBA in shmat()
linux-user: Use glib malloc functions in load_symbols()
linux-user: Check dump_write() return in elf_core_dump()
linux-user: Fix error handling in flatload.c target_pread()
linux-user: Fix incorrect use of host errno in do_ioctl_dm()
linux-user: Check lock_user() return value for NULL
linux-user: Pass missing MAP_ANONYMOUS to target_mmap() call
linux-user: report signals being taken in strace output
linux-user: Range check the nfds argument to ppoll syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TARGET_NR_select can have three different implementations:
1- to always return -ENOSYS
microblaze, ppc, ppc64
-> TARGET_WANT_NI_OLD_SELECT
2- to take parameters from a structure pointed by arg1
(kernel sys_old_select)
i386, arm, m68k
-> TARGET_WANT_OLD_SYS_SELECT
3- to take parameters from arg[1-5]
(kernel sys_select)
x86_64, alpha, s390x,
cris, sparc, sparc64
Some (new) architectures don't define NR_select,
4- but only NR__newselect with sys_select:
mips, mips64, sh
5- don't define NR__newselect, and use pselect6 syscall:
aarch64, openrisc, tilegx, unicore32
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
struct target_ucontext_v2 is not at the begining of the signal frame,
therefore do_sigaltstack was being passed bogus arguments.
As the offset depends on the type of signal frame fixed by passing in the
beginning of the context from do_sigreturn_v2 and do_rt_sigreturn_v2.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We currently make no checks on the flags passed to the clone syscall,
which means we will not fail clone attempts which ask for features
that we can't implement. Add sanity checking of the flags to clone
(which we were already doing in the "this is a fork" path, but not
for the "this is a new thread" path), tidy up the checking in
the fork path to match it, and check that the fork case isn't trying
to specify a custom termination signal.
This is helpful in causing some LTP test cases to fail cleanly
rather than behaving bizarrely when we let the clone succeed
but didn't provide the semantics requested by the flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Michael Walle