WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XSAVEERPTR is actually a fix for an errata; TCG does not have the issue.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG implements RDSEED, and in fact uses qcrypto_random_bytes which is
secure enough to match hardware behavior. Expose it to guests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD prefetch(w) instructions have not been deprecated together with the rest
of 3DNow!, and in fact are even supported by newer Intel processor. Mark them
as supported by TCG, as it supports all of 3DNow!.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Brown bag time: store instead of load results in uninitialized temp.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1704
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620134659.817559-1-richard.henderson@linaro.org
Fixes: e6dd5e782b ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One cannot test for feature aa32_simd_r32 without first
testing if AArch32 mode is supported at all. This leads to
qemu-system-aarch64: ARM CPUs must have both VFP-D32 and Neon or neither
for Apple M1 cpus.
We already have a check for ARMv8-A never setting vfp-d32 true,
so restructure the code so that AArch64 avoids the test entirely.
Reported-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mads Ynddal <m.ynddal@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Mads Ynddal <m.ynddal@samsung.com>
Message-id: 20230619140216.402530-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an x-rme cpu property to enable FEAT_RME.
Add an x-l0gptsz property to set GPCCR_EL3.L0GPTSZ,
for testing various possible configurations.
We're not currently completely sure whether FEAT_RME will
be OK to enable purely as a CPU-level property, or if it will
need board co-operation, so we're making these experimental
x- properties, so that the people developing the system
level software for RME can try to start using this and let
us know how it goes. The command line syntax for enabling
this will change in future, without backwards-compatibility.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Place the check at the end of get_phys_addr_with_struct,
so that we check all physical results.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle GPC Fault types in arm_deliver_fault, reporting as
either a GPC exception at EL3, or falling through to insn
or data aborts at various exception levels.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function takes the fields as filled in by
the Arm ARM pseudocode for TakeGPCException.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a bug in which we failed to initialize
the result attributes properly after the memset.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing this to get_phys_addr_lpae, stash it
in the S1Translate structure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not provide a fast-path for physical addresses,
as those will need to be validated for GPC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While Root and Realm may read and write data from other spaces,
neither may execute from other pa spaces.
This happens for Stage1 EL3, EL2, EL2&0, and Stage2 EL1&0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Realm security state, bit 55 of a block or page descriptor during
the stage2 walk becomes the NS bit; during the stage1 walk the bit 5
NS bit is RES0. With Root security state, bit 11 of the block or page
descriptor during the stage1 walk becomes the NSE bit.
Rather than collecting an NS bit and applying it later, compute the
output pa space from the input pa space and unconditionally assign.
This means that we no longer need to adjust the output space earlier
for the NSTable bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test in_space instead of in_secure so that we don't
switch out of Root space.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add input and output space members to S1Translate. Set and adjust
them in S1_ptw_translate, and the various points at which we drop
secure state. Initialize the space in get_phys_addr; for now leave
get_phys_addr_with_secure considering only secure vs non-secure spaces.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was added in 7e98e21c09 as part of a reorg in which
one of the argument had been legally NULL, and this caught
actual instances. Now that the reorg is complete, this
serves little purpose.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_RME, there are four physical address spaces.
For now, just define the symbols, and mention them in
the same spots as the other Phys indexes in ptw.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be helpful to have ARMMMUIdx_Phys_* to be in the same
relative order as ARMSecuritySpace enumerators. This requires
the adjustment to the nstable check. While there, check for being
in secure state rather than rely on clearing the low bit making
no change to non-secure state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce both the enumeration and functions to retrieve
the current state, and state outside of EL3.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes GPCCR, GPTBR, MFAR, the TLB flush insns PAALL, PAALLOS,
RPALOS, RPAOS, and the cache flush insns CIPAPA and CIGDPAPA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With RME, SEL2 must also be present to support secure state.
The NS bit is RES1 if SEL2 is not present.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define the missing SCR and HCR bits, allow SCR_NSE and {SCR,HCR}_GPF
to be set, and invalidate TLBs when NSE changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the missing field for ID_AA64PFR0, and the predicate.
Disable it if EL3 is forced off by the board or command-line.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
from ISA v1.6.1 onwards the bit position of ICR.IE changed.
ctx->icr_ie_offset contains the correct value for the ISA version used
by the vCPU. We also need to exit this tb here, as we might have enabled
interrupts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230621142302.1648383-9-kbastian@mail.uni-paderborn.de>
the CPU can change the privilege level by writing the corresponding bits
in PSW. If this happens all instructions after this 'mtcr' in the TB are
translated with the wrong privilege level. So we have to exit to the
cpu_loop() and start translating again with the new privilege level.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230621142302.1648383-8-kbastian@mail.uni-paderborn.de>
so we can recognize exceptions after re-enabling interrupts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230621142302.1648383-4-kbastian@mail.uni-paderborn.de>
this replaces all calls to tcg_gen_exit_tb() and moves them to
tricore_tb_stop().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230621142302.1648383-3-kbastian@mail.uni-paderborn.de>
if A[r1] == A[11], then we would overwrite the destination address of
the jump with the return address.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230621142302.1648383-2-kbastian@mail.uni-paderborn.de>
We are always taking the TRICORE_FEATURE_13 branch as every CPU has TRICORE_FEATURE_13.
For CPUs with ISA > 1.3 we have to take the else branch.
We fix this by inverting the condition. We check for
TRICORE_FEATURE_131, which every CPU except TRICORE_FEATURE_13 CPUs
have.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1700
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230612113245.56667-5-kbastian@mail.uni-paderborn.de>
some insns were not checking if an even index was used to access a 64
bit register. In the worst case that could lead to a buffer overflow as
reported in https://gitlab.com/qemu-project/qemu/-/issues/1698.
Reported-by: Siqi Chen <coc.cyqh@gmail.com>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230612113245.56667-4-kbastian@mail.uni-paderborn.de>
we don't want to save PSW.CDC to the CSA, but PSW.CDE must be saved.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1699
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230612113245.56667-3-kbastian@mail.uni-paderborn.de>
When translating "imask" instruction of Tricore architecture, QEMU did not check whether the register index was out of bounds, resulting in a global-buffer-overflow.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1698
Reported-by: Siqi Chen <coc.cyqh@gmail.com>
Signed-off-by: Siqi Chen <coc.cyqh@gmail.com>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230612065633.149152-1-coc.cyqh@gmail.com>
Message-Id: <20230612113245.56667-2-kbastian@mail.uni-paderborn.de>
this variant saves the 'IE' bit to a 'd' register. The 'IE' bitfield
changed from ISA version 1.6.1, so we add icr_ie_offset to DisasContext
as with the other DISABLE insn.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230614100039.1337971-9-kbastian@mail.uni-paderborn.de>
we also introduce the tc37x CPU that implements that ISA version.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230614100039.1337971-2-kbastian@mail.uni-paderborn.de>
Paolo Bonzini