In riscv_cpu_do_interrupt() we use the 'cause' value we got out of
cs->exception as a shift value. However this value can be larger
than 31, which means that "1 << cause" is undefined behaviour,
because we do the shift on an 'int' type.
This causes the undefined behaviour sanitizer to complain
on one of the check-tcg tests:
$ UBSAN_OPTIONS=print_stacktrace=1:abort_on_error=1:halt_on_error=1 ./build/clang/qemu-system-riscv64 -M virt -semihosting -display none -device loader,file=build/clang/tests/tcg/riscv64-softmmu/issue1060
../../target/riscv/cpu_helper.c:1805:38: runtime error: shift exponent 63 is too large for 32-bit type 'int'
#0 0x55f2dc026703 in riscv_cpu_do_interrupt /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../target/riscv/cpu_helper.c:1805:38
#1 0x55f2dc3d170e in cpu_handle_exception /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../accel/tcg/cpu-exec.c:752:9
In this case cause is RISCV_EXCP_SEMIHOST, which is 0x3f.
Use 1ULL instead to ensure that the shift is in range.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 1697837ed9 ("target/riscv: Add M-mode virtual interrupt and IRQ filtering support.")
Fixes: 40336d5b1d ("target/riscv: Add HS-mode virtual interrupt and IRQ filtering support.")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241128103831.3452572-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The 'maxmem' parameter parsed on the command line is held in uint64_t
and then assigned to the MachineState field that is 'ram_addr_t'. This
assignment will wrap on 32-bit hosts, silently changing the user's
config request if it were over-sized.
Improve the existing diagnositics for validating 'size', and add the
same diagnostics for 'maxmem'
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20241127114057.255995-1-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Also: add mapping for "quic_bcain@quicinc.com" which was ~briefly
used for some replies to mailing list traffic.
Signed-off-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241123164641.364748-2-bcain@quicinc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When building QEMU configure with --disable-gtk --disable-cocoa
on macOS we get:
User interface
Cocoa support : NO
SDL support : YES 2.30.5
SDL image support : NO
GTK support : NO
pixman : YES 0.42.2
VTE support : NO
PNG support : YES 1.6.43
VNC support : YES
VNC SASL support : YES
VNC JPEG support : YES 3.0.3
spice protocol support : YES 0.14.4
spice server support : NO
curses support : YES
brlapi support : NO
User defined options
cocoa : disabled
docs : disabled
gtk : disabled
../system/main.c:30:10: fatal error: 'SDL.h' file not found
30 | #include <SDL.h>
| ^~~~~~~
1 error generated.
Fix by adding the SDL dependency to main.c it's CFLAGS contains
the SDL include directory.
Fixes: 64ed6f92ff ("meson: link emulators without Makefile.target")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20241120114943.85080-1-philmd@linaro.org>
Song Gao is will be sick leave for a long time, I apply for maintainer
for LoongArch Virt Machine during this period, LoongArch TCG keeps unchanged
since I am not familiar with it. The maintainer duty will transfer to him
after he comes back to work.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241112073714.1953481-1-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These warnings are breaking some build configurations since 2 months
now (https://gitlab.com/qemu-project/qemu/-/issues/2575):
ui/cocoa.m:662:14: error: 'CVDisplayLinkCreateWithCGDisplay' is deprecated: first deprecated in macOS 15.0 - use NSView.displayLink(target:selector:), NSWindow.displayLink(target:selector:), or NSScreen.displayLink(target:selector:) [-Werror,-Wdeprecated-declarations]
662 | if (!CVDisplayLinkCreateWithCGDisplay(display, &displayLink)) {
| ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/CoreVideo.framework/Headers/CVDisplayLink.h:89:20: note: 'CVDisplayLinkCreateWithCGDisplay' has been explicitly marked deprecated here
89 | CV_EXPORT CVReturn CVDisplayLinkCreateWithCGDisplay(
| ^
ui/cocoa.m:663:29: error: 'CVDisplayLinkGetNominalOutputVideoRefreshPeriod' is deprecated: first deprecated in macOS 15.0 - use NSView.displayLink(target:selector:), NSWindow.displayLink(target:selector:), or NSScreen.displayLink(target:selector:) [-Werror,-Wdeprecated-declarations]
663 | CVTime period = CVDisplayLinkGetNominalOutputVideoRefreshPeriod(displayLink);
| ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/CoreVideo.framework/Headers/CVDisplayLink.h:182:18: note: 'CVDisplayLinkGetNominalOutputVideoRefreshPeriod' has been explicitly marked deprecated here
182 | CV_EXPORT CVTime CVDisplayLinkGetNominalOutputVideoRefreshPeriod( CVDisplayLinkRef CV_NONNULL displayLink );
| ^
ui/cocoa.m:664:13: error: 'CVDisplayLinkRelease' is deprecated: first deprecated in macOS 15.0 - use NSView.displayLink(target:selector:), NSWindow.displayLink(target:selector:), or NSScreen.displayLink(target:selector:) [-Werror,-Wdeprecated-declarations]
664 | CVDisplayLinkRelease(displayLink);
| ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/CoreVideo.framework/Headers/CVDisplayLink.h:249:16: note: 'CVDisplayLinkRelease' has been explicitly marked deprecated here
249 | CV_EXPORT void CVDisplayLinkRelease( CV_RELEASES_ARGUMENT CVDisplayLinkRef CV_NULLABLE displayLink );
| ^
3 errors generated.
For the next release, ignore the warnings using #pragma directives.
At least until we figure the correct new API usage.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <20241121131954.98949-1-philmd@linaro.org>
We used to only have a single UART on the platform and it was located at
address 0x90000000. When the number of UARTs was increased to 4, the
first UART remained at it's location, but instead of being the first one
to be registered, it became the last.
This caused QEMU to pick 0x90000300 as the default UART, which broke
software that hardcoded the address of 0x90000000 and expected it's
output to be visible when the user configured only a single console.
This caused regressions[1] in the barebox test suite when updating to a
newer QEMU. As there seems to be no good reason to register the UARTs in
inverse order, let's register them by ascending address, so existing
software can remain oblivious to the additional UART ports.
Changing the order of uart registration alone breaks Linux which
was choosing the UART at 0x90000300 as the default for ttyS0. To fix
Linux we fix three things in the device tree:
1. Define stdout-path only one time for the first registered UART
instead of incorrectly defining for each UART.
2. Change the UART alias name from 'uart0' to 'serial0' as almost all
Linux tty drivers look for an alias starting with "serial".
3. Add the UART nodes so they appear in the final DTB in the
order starting with the lowest address and working upwards.
In summary these changes mean that the QEMU default UART (serial_hd(0))
is now setup where:
* serial_hd(0) is the lowest-address UART
* serial_hd(0) is listed first in the DTB
* serial_hd(0) is the /chosen/stdout-path one
* the /aliases/serial0 alias points at serial_hd(0)
[1]: https://lore.barebox.org/barebox/707e7c50-aad1-4459-8796-0cc54bab32e2@pengutronix.de/T/#m5da26e8a799033301489a938b5d5667b81cef6ad
[stafford: Change to serial0 alias and update change message, reverse
uart registration order]
Fixes: 777784bda4 ("hw/openrisc: support 4 serial ports in or1ksim")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241203110536.402131-2-shorne@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the existing design, TTCR is prone to undercounting when running in
continuous mode. This manifests as a timer interrupt appearing to
trigger a few cycles prior to the deadline set in SPR_TTMR_TP.
When the timer triggers, the virtual time delta in nanoseconds between
the time when the timer was set, and when it triggers is calculated.
This nanoseconds value is then divided by TIMER_PERIOD (50) to compute
an increment of cycles to apply to TTCR.
However, this calculation rounds down the number of cycles causing the
undercounting.
A simplistic solution would be to instead round up the number of cycles,
however this will result in the accumulation of timing error over time.
This patch corrects the issue by calculating the time delta in
nanoseconds between when the timer was last reset and the timer event.
This approach allows the TTCR value to be rounded up, but without
accumulating error over time.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
[stafford: Incremented version in vmstate_or1k_timer, checkpatch fixes]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Message-ID: <20241203110536.402131-3-shorne@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When under high load the test VM does not complete running in the
default 30 second timeout. Double it to give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20241129173120.761728-2-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use self_set_machine() to set and check for the availability of the
default pc machine (so that the test is not failing if the machine
has not been included in the QEMU binary).
Message-ID: <20241128120142.593408-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By using QemuSystemTest as a base class, we can use the set_machine()
command to check whether the required machine is available in the
binary (otherwise this test is failing when QEMU has been compiled
without the default 'pc' machine type).
Message-ID: <20241128115019.591362-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch simplifies (and makes less confusing) bit checks by
replacing `find_next_bit()` calls with boolean AND operation.
Resolves: Coverity CID 1563776
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Reviewed-by: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Cc: qemu-devel@nongnu.org
Message-ID: <20241129103239.464061-3-r.peniaev@gmail.com>
Allthough the size of MAX_MUX is equal to 4 and likely will never
change, this patch changes type of constant to unsigned long to
be on the safe side.
Also add a static compile check that MAX_MUX never bigger than
`sizeof(d->mux_bitset) * BITS_PER_BYTE`.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Reviewed-by: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Cc: qemu-devel@nongnu.org
Message-ID: <20241129103239.464061-2-r.peniaev@gmail.com>
This verifies expected behaviour of previous bug fix patch.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <7017658155c517b9665b75333a97c79aa2d4f3df.1732465720.git.qemu_oss@crudebyte.com>
With a valid file ID (FID) of an open file, it should be possible to send
a 'Tgettattr' 9p request and successfully receive a 'Rgetattr' response,
even if the file has been removed in the meantime. Currently this would
fail with ENOENT.
I.e. this fixes the following misbehaviour with a 9p Linux client:
open("/home/tst/filename", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
unlink("/home/tst/filename") = 0
fstat(3, 0x23aa1a8) = -1 ENOENT (No such file or directory)
Expected results:
open("/home/tst/filename", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
unlink("/home/tst/filename") = 0
fstat(3, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
This is because 9p server is always using a path name based lstat() call
which fails as soon as the file got removed. So to fix this, use fstat()
whenever we have an open file descriptor already.
Fixes: 00ede4c252 ("virtio-9p: getattr server implementation...")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/103
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4c41ad47f449a5cc8bfa9285743e029080d5f324.1732465720.git.qemu_oss@crudebyte.com>
The comment claims that we'd only support basic Tgetattr fields. This is
no longer true, so remove this comment.
Fixes: e06a765efb ("hw/9pfs: Add st_gen support in getattr reply")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <fb364d12045217a4c6ccd0dd6368103ddb80698b.1732465720.git.qemu_oss@crudebyte.com>
'Tgetattr' 9p request and its 'Rgetattr' response types are already used
by test client, however this response type is yet missing in function
rmessage_name(), so add it.
Fixes: a6821b8284 ("tests/9pfs: compare QIDs in fs_walk_none() test")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <e183da80d390cfd7d55bdbce92f0ff6e3e5cdced.1732465720.git.qemu_oss@crudebyte.com>
All 9p response types are prefixed with an "R", therefore fix
"READDIR" -> "RREADDIR" in function rmessage_name().
Fixes: 4829469fd9 ("tests/virtio-9p: added readdir test")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <daad7af58b403aaa2487c566032beca36664b30e.1732465720.git.qemu_oss@crudebyte.com>
After removing a file from the file system, we should still be able to
work with the file if we already had it open before removal.
As a first step we verify that it is possible to write to an unlinked
file, as this is what already works. This test is extended later on
after having fixed other use cases after unlink that are not working
yet.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3d6449d4df25bcdd3e807eff169f46f1385e5257.1732465720.git.qemu_oss@crudebyte.com>
Drop V9fsFidState's 'next' member, which is no longer used since:
f5265c8f91 ('9pfs: use GHashTable for fid table')
Fixes: f5265c8f91 ('9pfs: use GHashTable for fid table')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1tE4v2-0051EH-Ni@kylie.crudebyte.com>
Host drivers do not necessarily set cdb_len in megasas io commands.
With commits 6d1511cea0 ("scsi: Reject commands if the CDB length
exceeds buf_len") and fe9d8927e2 ("scsi: Add buf_len parameter to
scsi_req_new()"), this results in failures to boot Linux from affected
SCSI drives because cdb_len is set to 0 by the host driver.
Set the cdb length to its actual size to solve the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Link: https://lore.kernel.org/r/20230228171129.4094709-1-linux@roeck-us.net
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hvf on x86 only supported 2MiB large pages, but never bothered to strip
out the 1GiB page size capability from -cpu host. With QEMU 8.0.0 this
became a problem because OVMF started to use 1GiB pages by default.
Let's just unconditionally add 1GiB page walk support to the walker.
With this fix applied, I can successfully run OVMF again.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1603
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reported-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20230420225258.58009-1-agraf@csgraf.de
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b12cb3819 (amd_iommu: Check APIC ID > 255 for XTSup) throws
linking error for the `kvm_enable_x2apic` when kvm is disabled
and Clang is used for compilation.
This issue comes up because Clang does not remove the function callsite
(kvm_enable_x2apic in this case) during optimization when if condition
have variable. Intel IOMMU driver solves this issue by creating separate
if condition for checking variables, which causes call site being
optimized away by virtue of `kvm_irqchip_is_split()` being defined as 0.
Implement same solution for the AMD driver.
Fixes: b12cb3819b (amd_iommu: Check APIC ID > 255 for XTSup)
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Santosh Shukla <santosh.shukla@amd.com>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Link: https://lore.kernel.org/r/20241114114509.15350-1-sarunkod@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some small bug fixes, notably a fix for a regression
in cpu hotplug after migration. I also included a
new test, just to help make sure we don't regress cxl.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmdHJRIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpTkQIAJYFpFTPRnO8mA6gurfheB7Jt0ywAMrjKWfg
uEkfZXXSQeCS8NBNPoZt7S8AE6xHE2a4b5lNWiS4a4coFmgTjtKPM8YsU01riyRk
EasRxynGua2XGUWGK93r9L27v9zGz/vRC0Lujmw3VAUKGeL7a17KzmxwXLXe+DzS
PgcI/H5hqoCDalT8aF6wOEDaWIHeo4dauDubYavW/+yaPtUvmy9MBkXbIV4iYqT5
V6geeYIKW/yE/GHxxXOw/RE1FgpiZhebtQP26jPTSk0z/JaV5S0DNYs07joXmbaU
fW5LSLgH3+oDI/GIhvsZ6hP87rVXBdaAogeJqT8SsuChBR55TpY=
=B7KB
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: bug fixes, new test
Some small bug fixes, notably a fix for a regression
in cpu hotplug after migration. I also included a
new test, just to help make sure we don't regress cxl.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmdHJRIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpTkQIAJYFpFTPRnO8mA6gurfheB7Jt0ywAMrjKWfg
# uEkfZXXSQeCS8NBNPoZt7S8AE6xHE2a4b5lNWiS4a4coFmgTjtKPM8YsU01riyRk
# EasRxynGua2XGUWGK93r9L27v9zGz/vRC0Lujmw3VAUKGeL7a17KzmxwXLXe+DzS
# PgcI/H5hqoCDalT8aF6wOEDaWIHeo4dauDubYavW/+yaPtUvmy9MBkXbIV4iYqT5
# V6geeYIKW/yE/GHxxXOw/RE1FgpiZhebtQP26jPTSk0z/JaV5S0DNYs07joXmbaU
# fW5LSLgH3+oDI/GIhvsZ6hP87rVXBdaAogeJqT8SsuChBR55TpY=
# =B7KB
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 27 Nov 2024 13:56:34 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
vhost: fail device start if iotlb update fails
bios-tables-test: Add data for complex numa test (GI, GP etc)
bios-tables-test: Add complex SRAT / HMAT test for GI GP
bios-tables-test: Allow for new acpihmat-generic-x test data.
qapi/qom: Change Since entry for AcpiGenericPortProperties to 9.2
hw/acpi: Fix size of HID in build_append_srat_acpi_device_handle()
qapi: fix device-sync-config since-version
hw/cxl: Check for zero length features in cmd_features_set_feature()
tests/acpi: update expected blobs
Revert "hw/acpi: Make CPUs ACPI `presence` conditional during vCPU hot-unplug"
Revert "hw/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states"
qtest: allow ACPI DSDT Table changes
vhost_net: fix assertion triggered by batch of host notifiers processing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix the flaky loongarch64 and sh4 functional tests
* Refuse to compile with old XCode versions that don't work anymore
* Remove an unused function from PCI code
-----BEGIN PGP SIGNATURE-----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=6+P3
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-11-27' of https://gitlab.com/thuth/qemu into staging
* Two small doc updates
* Fix the flaky loongarch64 and sh4 functional tests
* Refuse to compile with old XCode versions that don't work anymore
* Remove an unused function from PCI code
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmdG9WcRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVwTRAAgOWsUiqscFk7x+G1EcxE21Cii1s3kj2t
# BYjzsl+sHzu2/aiazYfRbYOwUoXDU5kshfA0Df5KIQs2o1VBFt+v9z5vEAMjZ1tT
# j3LfazCUb4pmwS4wiD1DeEgrbCzrQ/B5grvyJsf7eB9pIxnGt+R1FGdpyDoKv8HB
# fTm6tkWKf6Mn8vJm/S+dJkoZu4ToBIOl2Q/s3/NxSf6a07FvY1QERCHndKGI90kE
# 0jodq+lb1UotaqicmlenSY33FGWWH2aeiSWGnsZRzDPLedmTBvY6hnkHtB2u+0kF
# D13ZF8oxc1pdviMXu978YRdKHmQacQ0RZVoJ6UxEf7tsDI4dEI87enVTBueGgv3z
# iz4wDDg6i/5kn12eOkjv3YgzcSF37kS/4aHltxyyuZBVT1tBsZ++zz5eCfTcO9wa
# mYElg1KDmWjmzs/HwtRb/07Bws7TIxxBUICKCA39GFpAKq6mssNAWujmhtB18AAC
# 8+tyCOz1KbseJR1oO2+I5biWBLOfAtHrBdSYIIM7yn+FWXC81kYhmT+/6hhkvl0u
# OHamRK8Kmpi71wRkm+3C/J+A1XDirXywteNIpsJXaAIEdSFzWRZdVMKblaHtqxET
# DwMdYRZ9u45phg5b+lTbDLBgsSf93NnrqyyIG7/6mS2CLwQ1x6o+NnleIJluNxSC
# kROh/xwUydo=
# =6+P3
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 27 Nov 2024 10:33:11 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-11-27' of https://gitlab.com/thuth/qemu:
hw/pci: Remove unused pci_irq_pulse() method
tests/functional: Remove sleep workarounds from sh4 test
.gitlab-ci.d/cirrus: Remove the wrong CPU and RAM settings from the macOS job
meson.build: Refuse XCode versions < v15.0
tests/functional: Fix the running test case causes loongarch64 to hang
docs: Document that hvf on Arm is supported
docs/devel/testing/functional: Clarify that we have to use the build folder
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Last use of pci_irq_pulse() was removed 7 years ago in commit
5e9aa92eb1 ("hw/block: Fix pin-based interrupt behaviour of NVMe").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241122103418.539-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These were introduced in the avocado tests to workaround read issues
when interacting with console. They are no longer necessary and we can
use the expected login string instead.
Test always passes now. Remove skipUnless test on QEMU_TEST_FLAKY_TESTS.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241122141827.2039984-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The macOS runner ignores them and always uses 4 CPUs and 12 GiB of
RAM, so remove our setting to avoid wrong expectations.
Message-ID: <20241125124342.187594-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to our support policy, we only support the two latest
major versions of macOS, and we already removed compatibility code
for older versions. However, it's still possible that people install
an older version of XCode on a recent version of macOS - which won't
be able to compile QEMU anymore, see for example the ticket here:
https://gitlab.com/qemu-project/qemu/-/issues/2694
Thus let's set the expectations right and refuse older versions of
XCode that do not match the two latest versions of macOS anymore.
Message-ID: <20241126081054.244365-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is a bug in the process of resolving the serial port base address
in the fdt of the loongarch VM UEFI. When both serial port information
and rng-seed information are chosen in the fdt, there is a probability
that the serial port base address cannot be resolved correctly.
This problem can be fixed by updating UEFI.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2686
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20241127013438.2206426-1-lixianglai@loongson.cn>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
hvf on Arm is supported since commit a1477da3dd ("hvf: Add Apple
Silicon support").
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Message-ID: <20241127-build-v1-1-65b8162733f0@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make it clear that the commands have to be run from the folder with the
build, and use the python3 from our pyvenv to make sure that the
pycotap module is available.
Message-ID: <20241112115302.470527-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While starting a vhost device, updating iotlb entries
via 'vhost_device_iotlb_miss' may return an error.
qemu-kvm: vhost_device_iotlb_miss:
700871,700871: Fail to update device iotlb
Fail device start when such an error occurs.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20241107113247.46532-1-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Add a test with 6 nodes to exercise most interesting corner cases of SRAT
and HMAT generation including the new Generic Initiator and Generic Port
Affinity structures. More details of the set up in the following patch
adding the table data.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241107123446.902801-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The test to be added exercises many corner cases of the SRAT and HMAT table
generation.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241107123446.902801-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This feature was only applied during the 9.2 cycle, so reflect
that rather than 9.1.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Closes: https://lore.kernel.org/qemu-devel/ZyngEiwmYeZ-DvCy@redhat.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241107123446.902801-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The size should always be 8 so hard code that. By coincidience the
incorrect use of sizeof(char *) is 8 on 64 bit hosts, but was caught
by CI testing with i686 as the host.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Closes: https://lore.kernel.org/qemu-devel/20241104110025-mutt-send-email-mst@kernel.org/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241107123446.902801-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Actually it comes in 9.2, not 9.1.
Fixes: 3f98408e2e ("qapi: introduce device-sync-config")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20241108071957.727286-1-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Zero length data for features doesn't make any sense so exclude that case
early. This fixes the undefined behavior reported by coverity for a zero
length memcpy().
Resolves CID 1564900 and 1564901
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241108175814.1248278-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 2d6cfbaf17.
The patch is supposed to be part of ARM CPU hotplug series and has not value
on its own without it. The series however is still in RFC stage and outside
of scope 9.2 release.
On top of that it introduces not needed callback that pokes directly into
CPU state without any need for that. Instead properties and AML generator
option should be used to configure static platform depended vCPU presence
state.
Drop the patch so that corrected version could be posted along with
ARM CPU hotplug series and properly reviewed in relevant context.
That also helps us to keep history cleaner with new patch being
against original code vs a string of fixups on top of current mess.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20241112170258.2996640-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit bf1ecc8dad
which broke cpu hotplug in x86 after migration to older QEMU
Fixes: bf1ecc8dad (w/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20241112170258.2996640-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
list changed files in tests/qtest/bios-tables-test-allowed-diff.h
Message-ID: <20241106100047.18901c9d@imammedo.users.ipa.redhat.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20241112170258.2996640-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the backend of vhost_net restarts during the vm is running, vhost_net
is stopped and started. The virtio_device_grab_ioeventfd() fucntion in
vhost_net_enable_notifiers() will result in a call to
virtio_bus_set_host_notifier()(assign=false).
And now virtio_device_grab_ioeventfd() is batched in a single transaction
with virtio_bus_set_host_notifier()(assign=true).
This triggers the following assertion:
kvm_mem_ioeventfd_del: error deleting ioeventfd: Bad file descriptor
This patch moves virtio_device_grab_ioeventfd() out of the batch to fix
this problem.
To be noted that the for loop to release ioeventfd should start from i+1,
not i, because the i-th ioeventfd has already been released in
vhost_dev_disable_notifiers_nvqs().
Fixes: 6166799f6 ("vhost_net: configure all host notifiers in a single MR transaction")
Signed-off-by: Zuo Boqun <zuoboqun@baidu.com>
Reported-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Message-Id: <20241115080312.3184-1-zuoboqun@baidu.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell