In the long function bcm2835_property_mbox_push(), the variables
start_num, number and otp_row are used only in the four cases which
access OTP data, and their uses don't overlap with each other.
Make these variables have scope restricted to the cases where they're
used, so it's easier to read each individual case without having to
cross-refer up to the variable declaration at the top of the function
and check whether the variable is also used later in the loop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-4-peter.maydell@linaro.org
Coverity points out that in our handling of the property
RPI_FWREQ_SET_CUSTOMER_OTP we have a potential overflow. This
happens because we read start_num and number from the guest as
unsigned 32 bit integers, but then the variable 'n' we use as a loop
counter as we iterate from start_num to start_num + number is only an
"int". That means that if the guest passes us a very large start_num
we will interpret it as negative. This will result in an assertion
failure inside bcm2835_otp_set_row(), which checks that we didn't
pass it an invalid row number.
A similar issue applies to all the properties for accessing OTP rows
where we are iterating through with a start and length read from the
guest.
Use uint32_t for the loop counter to avoid this problem. Because in
all cases 'n' is only used as a loop counter, we can do this as
part of the for(), restricting its scope to exactly where we need it.
Resolves: Coverity CID 1549401
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-3-peter.maydell@linaro.org
The documentation of the "Set palette" mailbox property at
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#set-palette
says it has the form:
Length: 24..1032
Value:
u32: offset: first palette index to set (0-255)
u32: length: number of palette entries to set (1-256)
u32...: RGBA palette values (offset to offset+length-1)
We get this wrong in a couple of ways:
* we aren't checking the offset and length are in range, so the guest
can make us spin for a long time by providing a large length
* the bounds check on our loop is wrong: we should iterate through
'length' palette entries, not 'length - offset' entries
Fix the loop to implement the bounds checks and get the loop
condition right. In the process, make the variables local to
this switch case, rather than function-global, so it's clearer
what type they are when reading the code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-2-peter.maydell@linaro.org
This is identical with commit 30a1690f24 ("hvf: arm: Do not advance
PC when raising an exception") but for writes instead of reads.
Fixes: a2260983c6 ("hvf: arm: Add support for GICv3")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Setting pmu property used to have no effect for hvf so fix it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Any sysreg access results in an exception unless defined otherwise so
we should raise an exception by default.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_arch_init_vcpu() used to remove PMU when it is not available even
if the CPU model needs one. It is semantically incorrect, and may
continue execution on a misbehaving host that advertises a CPU model
while lacking its PMU. Keep the PMU when the CPU model needs one, and
let kvm_arm_vcpu_init() fail if the KVM implementation mismatches with
our expectation.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/kvm.c checked PMU availability but unconditionally set the
PMU feature flag for the host CPU model, which is confusing. Set the
feature flag only when available.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity has spotted a possible problem with the OAS handling
(CID 1558464), where the error return of oas2bits() -1 is not
checked, which can cause an overflow in oas value.
oas2bits() is only called with valid inputs, harden the function
to assert that.
Reported-By: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20240722103531.2377348-1-smostafa@google.com
Link: https://lore.kernel.org/qemu-devel/CAFEAcA-H=n-3mHC+eL6YjfL1m+x+b+Fk3mkgZbN74WNxifFVow@mail.gmail.com/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a bare-metal application on the raspi3 board reads the
AUX_MU_STAT_REG MMIO register while the device's buffer is
at full receive FIFO capacity
(i.e. `s->read_count == BCM2835_AUX_RX_FIFO_LEN`) the
assertion `assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN)`
fails.
Reported-by: Cryptjar <cryptjar@junk.studio>
Suggested-by: Cryptjar <cryptjar@junk.studio>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/459
Signed-off-by: Frederik van Hövell <frederik@fvhovell.nl>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=FxPm
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.1-2-20240726-1' of https://gitlab.com/npiggin/qemu into staging
fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmai5TsACgkQZ7MCdqhi
# HK4rgA//eh0ax3JnBGma1rVEDL5n5cdEYV+ATFYGc529CUZFUar3IMqSw3in8bJy
# uvQ6Cr/7IuusNEtoiYtdN1yNasqsm3fZB/hZ/Ekz32TsbpBRdkJW3ucavAu2rGM/
# EKRo7Y8gciy/Mj9y2JlIZqsDqYe+gribfGQvIg27DX+caAW/lKQdAdt4oJMTSdmr
# XR8JjtMdhUazKrI+bc/4EG6tIQyUdp+S1/z1q6Wthqt58dNRElTjkD9op4AsUWMu
# CE4a8ALCZoj3P3m+xf7xi7fT2JC2xgmNRCi3KbbhVEHdbFB6ViNYNuEYRS6GmpdC
# C6J/ZR6QXs6KB1KO7EyB+vsuxLX4Eb8aeCFxwMlzJ9Fo4g8JudABXOFzYTKX1xBn
# DUIGX91YACV43M2MvP/KuEU4zWpREO+U8MbQs/6s6fYsnCO2eKVJt/0Aaf1hmk37
# gY5Ak2DRx5TBvxlFy87zgHxHWTh/dGZodpN3IvCIDzVLnHGFlfluJbFRaoZSOecb
# 1vxDHORjIruLcAxNVEGkJ/6MxOrnjjoUzSPUQcbgJ5BpFZOdeGLiMAULu/HBLBd9
# 7dvVw+PeNEPJttYumljOD6nYc/jENhLQsvkc3++bwGNc/rpi4YngtB4jhT1HV2Cl
# oLool2ooKZgV4qx6IzeYo9feElvWVNK5XPzqDpSDlt9MaI+yTYM=
# =FxPm
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 Jul 2024 09:52:27 AM AEST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.1-2-20240726-1' of https://gitlab.com/npiggin/qemu: (96 commits)
target/ppc: Remove includes from mmu-book3s-v3.h
target/ppc/mmu-radix64: Remove externally unused parts from header
target/ppc: Unexport some functions from mmu-book3s-v3.h
target/ppc/mmu-hash32.c: Move get_pteg_offset32() to the header
target/ppc/mmu-hash32.c: Inline and remove ppc_hash32_pte_raddr()
target/ppc/mmu_common.c: Remove mmu_ctx_t
target/ppc/mmu_common.c: Stop using ctx in get_bat_6xx_tlb()
target/ppc: Remove bat_size_prot()
target/ppc/mmu_common.c: Use defines instead of numeric constants
target/ppc/mmu_common.c: Rename function parameter
target/ppc/mmu_common.c: Stop using ctx in ppc6xx_tlb_check()
target/ppc/mmu_common.c: Remove key field from mmu_ctx_t
target/ppc/mmu_common.c: Init variable in function that relies on it
target/ppc/mmu-hash32.c: Inline and remove ppc_hash32_pte_prot()
target/ppc: Add function to get protection key for hash32 MMU
target/ppc/mmu_common.c: Remove ptem field from mmu_ctx_t
target/ppc/mmu_common.c: Inline and remove ppc6xx_tlb_pte_check()
target/ppc/mmu_common.c: Simplify a switch statement
target/ppc/mmu_common.c: Remove single use local variable
target/ppc/mmu_common.c: Convert local variable to bool
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop includes from header that is not needed by the header itself and
only include them from C files that really need it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the parts not needed outside of mmu-radix64.c from the header to
the C file to leave only parts in the header that need to be exported.
Also drop unneded include of this header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc_hash64_hpt_base() and ppc_hash64_hpt_mask() functions are
mostly used by mmu-hash64.c only but there is one call to
ppc_hash64_hpt_mask() in hw/ppc/spapr_vhyp_mmu.c.in a helper function
that can be moved to mmu-hash64.c which allows these functions to be
removed from the header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is a simple shared function, move it to other similar
static inline functions in the header.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is used only once and does not add more clarity than
doing it inline.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Completely get rid of mmu_ctx_t after converting the remaining
functions to pass raddr and prot without the context struct.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass raddr and prot in function parameters instead
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is already a hash32_bat_prot() function that does most if this
and the rest can be inlined. Export hash32_bat_prot() and rename it to
ppc_hash32_bat_prot() to match other functions and use it in
get_bat_6xx_tlb().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Replace some BAT related constants with defines from mmu-hash32.h
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Rename parameter of get_bat_6xx_tlb() from virtual to eaddr to match
other functions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass raddr and prot in function parameters instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass it as a function parameter and remove it from mmu_ctx_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ppc6xx_tlb_check() relies on the caller to initialise raddr field
in ctx. Move this init from the only caller into the function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This is used only once and can be inlined.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add a function to get key bit from SR and use it instead of open coded
version.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of passing around ptem in context use it once in the same
function so it can be removed from mmu_ctx_t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is only called once and we can make the caller simpler
by inlining it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() the switch handles all cases so the
default is never reached and can be dropped. Also group together cases
which just return -4.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() tagtet_page_bits local is declared
only to use TARGET_PAGE_BITS once. Drop the unneeded variable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In mmu6xx_get_physical_address() ds is used as bool, declare it as
such. Also use named constant instead of hex value.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Pass it as a parameter instead. Also use named constants instead of
hex values when extracting bits from SR.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This function is used only once, its return value is ignored and one
of its parameter is a return value from a previous call. It is better
to inline it in the caller and remove it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Return hash value via a parameter and remove it from mmu_ctx.t.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The eaddr field of mmu_ctx_t is set once but never used so can be
removed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Invert conditions to avoid deep nested ifs and return early instead.
Remove some obvious comments that don't add more clarity.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Instead of using a local ret variable return directly and remove the
local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc6xx_tlb_pte_check() the pp variable is used only once to pass it
to a function parameter with the same name. Remove the local and
inline the value. Also use named constant for the hex value to make it
clearer.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In ppc6xx_tlb_pte_check() the pteh variable is used only once to
compare to the h parameter of the function. Inline its value and use
pteh name for the function parameter which is more descriptive.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ptev variable in ppc6xx_tlb_pte_check() is used only once and just
obfuscates an otherwise clear value. Get rid of it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ptem variable in ppc6xx_tlb_pte_check() is used only once,
simplify by removing it as the value is already clear itself without
adding a local name for it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The mmask local variable is a less descriptive local name for a
constant. Drop it and use the constant directly in the two places it
is needed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reorganise ppc_hash32_pp_prot() swapping the if legs so it does not
test for negative first and clean up to make it shorter. Also rename
it to ppc_hash32_prot().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Updated many VSX instructions to use tcg_gen_qemu_ld/st_i128, instead of using
tcg_gen_qemu_ld/st_i64 consecutively.
Introduced functions {get,set}_vsr_full to facilitate the above & for future use.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Updated instructions {l, st}vx to use tcg_gen_qemu_ld/st_i128,
instead of using 64 bits loads/stores in succession.
Introduced functions {get, set}_avr_full in vmx-impl.c.inc to
facilitate the above, and potential future usage.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Those functions are used to ld/st data to and from Altivec registers,
in 64 bits chunks, and are only used in vmx-impl.c.inc file,
hence the clean-up movement.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
xvcmp{eq, gt, ge, ne}{s, d}p : XX3-form
The changes were verified by validating that the tcg-ops generated for those
instructions remain the same which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification:
lxv{b16, d2, h8, w4, ds, ws}x : X-form
stxv{b16, d2, h8, w4}x : X-form
The changes were verified by validating that the tcg-ops generated for those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
{l, st}xvl(l) : X-form
The changes were verified by validating that the tcg-ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Also added a new function do_ea_calc_ra to calculate the effective address :
EA <- (RA == 0) ? 0 : GPR[RA], which is now used by the above-said insns,
and shall be used later by (p){lx, stx}vp insns.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
[np: Fix 32-bit build]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving the following instructions to decodetree specification :
lxs{d, iwa, ibz, ihz, iwz, sp}x : X-form
stxs{d, ib, ih, iw, sp}x : X-form
The changes were verified by validating that the tcg-ops generated by those
instructions remain the same, which were captured using the '-d in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Peter Maydell