The omap_gpmc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-44-peter.maydell@linaro.org
The omap_sdrc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-43-peter.maydell@linaro.org
Remove the OMAP2 specific code from omap_mmc.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-42-peter.maydell@linaro.org
Remove the OMAP2 specific code from omap_uart.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-40-peter.maydell@linaro.org
We've removed the OMAP2 SoC, so we can remove the OMAP2 GPIO
device. (The source file remains, as it also has the model of
the OMAP1 GPIO device.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-39-peter.maydell@linaro.org
The users of the OMAP2 SoC emulation have been removed, so we can
delete omap2.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-38-peter.maydell@linaro.org
Remove the MUSB USB2.0 OTG-compliant USB host controller
device model. This was only used by the tusb6010 USB
controller in the n800/n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-35-peter.maydell@linaro.org
The tusb6010 was only used by the n800/n810 machines, so it
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-34-peter.maydell@linaro.org
The OneNAND devices were only used by n800/n810, so they
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-33-peter.maydell@linaro.org
Remove the lm832x keyboard-and-pwm i2c device model. This
was only used by the n800 and n810 machines.
(Although this is an i2c device and so in theory available to create
on the command line, in practice it has an outbound IRQ line that the
machine model needs to wire up, and the only way to inject keys events
into it is to call the lm832x_key_event() function, so it isn't
in practice possible to use it separately from the n800/n810.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-32-peter.maydell@linaro.org
Remove the TWL92230 RTC device, which was used only by the n800 and n810.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-31-peter.maydell@linaro.org
Remove the tsc210x touchscreen controller device, which was
only used by the n800 and n810 and cheetah.
The uWireSlave struct is still used in omap1.c (at least for
compilation purposes -- nothing any longer calls omap_uwire_attach()
and so the struct's members will not be used at runtime), so
we move it into omap.h so we can delete tsc2xxx.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-30-peter.maydell@linaro.org
Remove the tsc2005 touchscreen controller, which was only used
by the n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-29-peter.maydell@linaro.org
Remove the blizzard display device, which was only used with the
n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-28-peter.maydell@linaro.org
The devices in hw/misc/cbus.c were used only by the
now-removed nseries machine types, so they can be removed.
As this is the last use of the CONFIG_NSERIES define we
can remove that from KConfig now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-27-peter.maydell@linaro.org
Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]
The pxa27x-timer can be removed now we have removed the PXA2xx
SoC models. The pxa25x-timer device must remain as it is still
used by strongarm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-24-peter.maydell@linaro.org
Remove the pxa2xx-specific interrupt controller device.
As this is the last user of the pxa.h header file and the
CONFIG_PXA2XX define we can remove those too.
This completes the removal of the pxa2xx specific code. We leave:
* pxa2xx_timer -- still used by the Collie board (strongarm)
* the definitions of the CPUs themselves in target/arm
(still usable by linux-user mode)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-23-peter.maydell@linaro.org
Remove the pxa2xx-specific GPIO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-22-peter.maydell@linaro.org
Remove the pxa2xx specific pcmcia device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-21-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_dma device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-20-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_keypad device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-18-peter.maydell@linaro.org
Remove the pxa2xx-specific pxa2xx_mmci device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-17-peter.maydell@linaro.org
All the callers of pxa270_init() and pxa255_init() have now been removed,
so we can remove pxa2xx.c. This also removes the only uses of a lot of
pxa2xx specific devices, which will be removed in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-16-peter.maydell@linaro.org
pxa2xx_timer includes pxa.h, but it doesn't actually make
use of any of the #defines, function prototypes or structs
defined there. Remove the unnecessary include (we will
shortly be removing the whole header file).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-15-peter.maydell@linaro.org
Currently the STRONGARM KConfig symbol pulls in PXA2XX. Since we've now
removed all the true uses of PXA2XX, we'd like to remove the PXA2XX
symbol too. To permit that, make STRONGARM directly select the things
it truly depends on:
* pxa25x-timer
* SSI
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-14-peter.maydell@linaro.org
The 'z2' machine was deprecated in 9.0, so we can remove it for
9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-13-peter.maydell@linaro.org
The MAINSTONE_FPGA device was used only by the 'mainstone' machine
type, so we can remove it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-12-peter.maydell@linaro.org
The 'mainstone' machine has been deprecated since 9.0, and
so we can remove it for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-11-peter.maydell@linaro.org
The connex and verdex machines have been deprecated since
9.0 and so can be removed for the 9.2 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-10-peter.maydell@linaro.org
The 'cheetah' machine has been deprecated since 9.0, so we can
remove it for the 9.2 release.
(tsc210x.c is also used by nseries, so move its MAINTAINER file
line there; the nseries boards are also about to be removed.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-9-peter.maydell@linaro.org
The ZAURUS KConfig symbol used to do multiple things:
* pull in the tc6393xb display device
* pull in the Zaurus SCOOP GPIO device
* pull in hw/block/nand.c code
* pull in hw/block/ecc.c code
and was used by multiple machine types in the Zaurus family.
Now that we've removed all the Zaurus machine types except
"collie" (which is not currently deprecated), we can simplify
this. "collie" doesn't need any of the above things except
for the SCOOP GPIO device.
Remove the does-lots-of-things ZAURUS KConfig symbol and instead have
collie pull in ZAURUS_SCOOP, a new KConfig symbol which exists only
to control the presence of the SCOOP GPIO device. Move the
associated source file lines in MAINTAINERS into the Collie
subsection, since this is now its only user.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-8-peter.maydell@linaro.org
The tc6393xb was used only by the XScale-based Zaurus machine types.
Now they have been removed we can remove this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-7-peter.maydell@linaro.org
The ADS7846 touchscreen controller device was used only by
the XScale-based PDA machine types. Now that they have been
removed, this device is not used in the tree and can be
deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-3-peter.maydell@linaro.org
The Sharp XScale-based PDA board models akita, borzoi, spitz,
terrier, and tosa were all deprecated in 9.0, so our deprecation
cycle permits removing them for the 9.2 release.
Remove the source files for the board models themselves, and their
documentation. There were no tests for these boards.
We will move the text describing the dropped boards from
deprecated.rst to removed-features.rst when we've cleaned up all the
boards it lists. Device models used only by removed board models
will be removed in separate commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-2-peter.maydell@linaro.org
The enable bits in the EXT_CSD_PART_CONFIG ext_csd register do *not*
specify whether the boot partitions exist, but whether they are enabled
for booting. Existence of the boot partitions is specified by a
EXT_CSD_BOOT_MULT != 0.
Currently, in the case of boot-partition-size=1M and boot-config=0,
Linux detects boot partitions of 1M. But as sd_bootpart_offset always
returns 0, all reads/writes are mapped to the same offset in the backing
file.
Fix this bug by calculating the offset independent of which partition is
enabled for booting.
This bug is unlikely to affect many users with QEMU's current set of
boards, because only aspeed sets boot-partition-size, and it also
sets boot-config to 8. So to run into this a user would have to
manually mark the boot partition non-booting from within the guest.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Message-id: 20240906164834.130257-1-jlu@pengutronix.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added note to commit message about effects of bug]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At e72a7f65c1 (hw: Move declaration of IRQState to header and add init
function, 2024-06-29), we've changed qemu_allocate_irq() to use a
combination of g_new() + object_initialize() instead of
IRQ(object_new()). The latter sets obj->free, so that that the memory is
properly cleaned when the object is finalized, but the former doesn't.
Fixes: e72a7f65c1 (hw: Move declaration of IRQState to header and add init function)
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-id: 1723deb603afec3fa69a75970cef9aac62d57d62.1726674185.git.quic_mathbern@quicinc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure that the FIFO is checked for emptiness before popping data
from it. Previously, the code directly popped the data from the FIFO
without checking, which could cause an assertion failure:
../util/fifo8.c:67: fifo8_pop: Assertion `fifo->num > 0' failed.
Signed-off-by: Shiva sagar Myana <Shivasagar.Myana@amd.com>
Message-id: 20240924112035.1320865-1-Shivasagar.Myana@amd.com
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the SFDP table for the Micron Xccela mt35xu01g flash.
Signed-off-by: Shiva sagar Myana <Shivasagar.Myana@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240829120117.616861-1-Shivasagar.Myana@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cadence GEM peripherals as configured for Zynq MPSoC and Versal
platforms have two priority queues with separate interrupt sources for
each. If the interrupt source for the second priority queue is not
connected, they work in polling mode only. This change connects the
second interrupt source for platforms where it is available. This patch
has been tested using the lwIP stack with a Xilinx-supplied driver from
their embeddedsw repository.
Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds support for the controller atomic parameters: AWUN and AWUPF. Atomic
Compare and Write Unit (ACWU) is not currently supported.
Writes that adhere to the ACWU and AWUPF parameters are guaranteed to be atomic.
New NVMe QEMU Parameters (See NVMe Specification for details):
atomic.dn (default off) - Set the value of Disable Normal.
atomic.awun=UINT16 (default: 0)
atomic.awupf=UINT16 (default: 0)
By default (Disable Normal set to zero), the maximum atomic write size is
set to the AWUN value. If Disable Normal is set, the maximum atomic write
size is set to AWUPF.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add a boolean prop (ctratt.mem) for setting CTRATT.MEM and default it to
unset (false) to keep existing behavior of the device intact.
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Arun Kumar <arun.kka@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Indicate that 'MDTS and Size Limits Exclude Metadata (MEM)' in the
Controller Attributes (CTRATT) I/O Command Set Independent Identify
Controller Data Structure.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: updated commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Clear masked events from the aer queue when get log page is issued with
RAE 0 without checking for the presence of outstanding aer requests.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
[k.jensen: remove unnecessary QTAILQ_EMPTY check]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The controller already supports this decoding, so just set the
ID_CTRL.SGLS field accordingly.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-30-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-29-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-28-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-27-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-21-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-20-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-19-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-18-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-13-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-12-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-11-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-10-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-9-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-4-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-3-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-2-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Before, the virtio-mem device would unplug all the memory with any reset
of the device, including during the wake-up of the guest from a
suspended state. Due to this, the virtio-mem driver in the Linux kernel
disallowed suspend-to-ram requests in the guest when the
VIRTIO_MEM_F_PERSISTENT_SUSPEND feature is not exposed by QEMU.
This patch adds the code to skip the reset on wake-up and exposes
theVIRTIO_MEM_F_PERSISTENT_SUSPEND feature to the guest kernel driver
when suspending is possible in QEMU (currently only x86).
Message-ID: <20240904103722.946194-5-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
LegacyReset does not pass ResetType to the reset callback method, which
the new Resettable framework uses. Due to this, virtio-mem cannot use
the new RESET_TYPE_WAKEUP to skip the reset during wake-up from a
suspended state.
This patch adds overrides Resettable interface methods in VirtIOMEMClass
to use the new Resettable framework and replaces
qemu_[un]register_reset() calls with qemu_[un]register_resettable().
Message-ID: <20240904103722.946194-4-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Some devices need to distinguish cold start reset from waking up from a
suspended state. This patch adds new value to the enum, and updates the
i386 wakeup method to use this new reset type.
Message-ID: <20240904103722.946194-3-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Currently, both qemu_devices_reset() and MachineClass::reset() use
ShutdownCause for the reason of the reset. However, the Resettable
interface uses ResetState, so ShutdownCause needs to be translated to
ResetType somewhere. Translating it qemu_devices_reset() makes adding
new reset types harder, as they cannot always be matched to a single
ShutdownCause here, and devices may need to check the ResetType to
determine what to reset and if to reset at all.
This patch moves this translation up in the call stack to
qemu_system_reset() and updates all MachineClass children to use the
ResetType instead.
Message-ID: <20240904103722.946194-2-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Virtio memory devices rely on PCI BARs to expose the contents of memory.
Because of this they cannot be used (yet) with virtio-mmio or virtio-ccw.
In fact the code that is common to virtio-mem and virtio-pmem, which
is in hw/virtio/virtio-md-pci.c, is only included if CONFIG_VIRTIO_PCI
is set. Reproduce the same condition in the Kconfig file, only allowing
VIRTIO_MEM and VIRTIO_PMEM to be defined if the transport supports it.
Without this patch it is possible to create a configuration with
CONFIG_VIRTIO_PCI=n and CONFIG_VIRTIO_MEM=y, but that causes a
linking failure.
Message-ID: <20240906101658.514470-1-pbonzini@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
The 'GPL-2.0' license identifier has been deprecated since license
list version 3.0 [1] and replaced by the 'GPL-2.0-only' tag [2].
[1] https://spdx.org/licenses/GPL-2.0.html
[2] https://spdx.org/licenses/GPL-2.0-only.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0/GPL-2.0-only/ \
$(git grep -l 'SPDX-License-Identifier: GPL-2.0[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'GPL-2.0+' license identifier has been deprecated since license
list version 2.0rc2 [1] and replaced by the 'GPL-2.0-or-later' [2]
tag.
[1] https://spdx.org/licenses/GPL-2.0+.html
[2] https://spdx.org/licenses/GPL-2.0-or-later.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0+/GPL-2.0-or-later/ \
$(git grep -lP 'SPDX-License-Identifier: \W+GPL-2.0\+[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since the "2 | 3+" expression can be simplified as "2+",
it is pointless to mention the GPLv3 license.
Add the corresponding SPDX identifier to remove all doubt.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The last use of sysbus_mmio_unmap was removed by
981b1c6266 ("spapr/xive: rework the mapping the KVM memory regions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
DM163 is an emulated 8x8 LED matrix. This commit flips the image
horizontally so it's rendered the same way as on the hardware.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The System Control and Management Interface is specific to arm
machines, so don't include this device in non-arm targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The description about virt machine type is removed by mistake, add
new description here. Here is output result with command
"./qemu-system-loongarch64 -M help"
Supported machines are:
none empty machine
virt QEMU LoongArch Virtual Machine (default)
x-remote Experimental remote machine
Without the patch, it shows as follows:
Supported machines are:
none empty machine
virt (null) (default)
x-remote Experimental remote machine
Fixes: ef2f11454c(hw/loongarch/virt: Replace Loongson IPI with LoongArch IPI)
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()") contained a typo
in the NIC alias which caused initialisation of the in-built dp83932 NIC to fail
when using the normal -nic user,model=dp83932 command line.
Fixes: e104edbb9d ("hw/mips/jazz: use qemu_find_nic_info()")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
PowerMac is spelled as PowerMAC (Media Access Control) in some places.
This is misleading.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2297
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
in many cases, <zlib.h> is only included for crc32 function,
and in some of them, there's a comment saying that, but in
a different way. In one place (hw/net/rtl8139.c), there was
another #include added between the comment and <zlib.h> include.
Make all such comments to be on the same line as #include, make
it consistent, and also add a few missing comments, including
hw/nvram/mac_nvram.c which uses adler32 instead.
There's no code changes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SW modifying USART_CR1 TE bit should cuase HW to respond by altering
USART_ISR TEACK bit, and likewise for RE and REACK bit.
This resolves some but not all issues necessary for the official STM USART
HAL driver to function as is.
Fixes: 87b77e6e01 ("hw/char/stm32l4x5_usart: Enable serial read and write")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2540
Signed-off-by: Jacob Abrams <satur9nine@gmail.com>
Message-id: 20240911043255.51966-1-satur9nine@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These were passing a NULL buffer pointer unconditionally, which happens
to behave in a mostly benign way (except for the chance of an excess
memory region unref and a bounce buffer leak). Per the function comment,
this was never meant to be accepted though, and triggers an assertion
with the "softmmu: Support concurrent bounce buffers" change.
Given that the code in question never sets up any mappings, just remove
the unnecessary dma_memory_unmap calls along with the DBDMA_io struct
fields that are now entirely unused.
Signed-off-by: Mattias Nissler <mnissler@rivosinc.com>
Message-Id: <20240916175708.1829059-1-mnissler@rivosinc.com>
Fixes: be1e343995 ("macio: switch over to new byte-aligned DMA helpers")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
An integer overflow fix for the last zone on a zoned block device whose
capacity is not a multiple of the zone size.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmbpa0sACgkQnKSrs4Gr
c8hdAwgAgp6AJVXHiPo43GbhdSsKJ2bq8DIPrsqgwAxD3rgxxRVwsWzENQgzF8O9
qoXPmU0eqPp0zTsKTxNrlIgCpsJ3X4Oeg89u4N1xUOAJtADZGlbucUQEkAgIhWMl
IFLjtFc7EbhWn57FmQGzANeOJOB+OumfQGeC7wbeAtUCn7g08rXtq+5I5GRKqkkP
u1FlSassd7fyVnlVc+BT2aKANBITKhJGhYqwndvxXzMIi0L54/bQRrarLoy7oJuG
1k8zYLi6giUINNwYMtzn5ooXNnOSoxHKKfwcFT8hGZixwBBnCnYHjNkfs/QyvZQ7
ZuR9mY6pqp/lg5127UlpOR7d6HADLQ==
=709Z
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
An integer overflow fix for the last zone on a zoned block device whose
capacity is not a multiple of the zone size.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmbpa0sACgkQnKSrs4Gr
# c8hdAwgAgp6AJVXHiPo43GbhdSsKJ2bq8DIPrsqgwAxD3rgxxRVwsWzENQgzF8O9
# qoXPmU0eqPp0zTsKTxNrlIgCpsJ3X4Oeg89u4N1xUOAJtADZGlbucUQEkAgIhWMl
# IFLjtFc7EbhWn57FmQGzANeOJOB+OumfQGeC7wbeAtUCn7g08rXtq+5I5GRKqkkP
# u1FlSassd7fyVnlVc+BT2aKANBITKhJGhYqwndvxXzMIi0L54/bQRrarLoy7oJuG
# 1k8zYLi6giUINNwYMtzn5ooXNnOSoxHKKfwcFT8hGZixwBBnCnYHjNkfs/QyvZQ7
# ZuR9mY6pqp/lg5127UlpOR7d6HADLQ==
# =709Z
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Sep 2024 12:43:07 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
hw/block: fix uint32 overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support for IGDs of gen 11 and later
* Coverity fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmbpWl0ACgkQUaNDx8/7
7KFYJhAAu8Dyf96RUr4ucu/VaSlTi/rk/i5sivD4EXiCOf2qpQtyoo+C8DJmjAZg
nC+4IpD2vu2C/xaZoQ4o6uQL7c45dOup59jcbKO+6NekF521Y6aq9OvE5v55CAwu
R38UWI6ZX5qqyU/tA39/s7migIvCtK7VgTzEs2Lpzw8WetCFattvrEiKHt09fNdX
kSPdFVV6FymOowAekQtI2JACr8C5nm8x9npzyL1SjauvWA70aOU9h1iHoIxHGKFF
jlotd6v16c0Z260AUP/RDBwf8wqg2MtwBOI3qVGYD20Xd7tRQkLlFp8X5lNw4pHr
eylqqxW3E4LJ4vSWpi4Jj2tZN5tZl8X927ew79D2gf69R8f1l+5CG/qqynMRbZ0b
gE1E5UNfEkXYX9PMuf2uenoiahMxh7ZHwzJmtFcTLGyHGudSaUu3S7Yu5a1R0ZDf
8OyzE1E1X/8uCABvSgPphtSfYD9kXKiwNJSPrj3PZ1nXgNoA6BDi5sOeTPm0POBA
IfB10VEXDd61KPFKGQqZ1Qqrvb0LsCTvFTwCHRHBEB/F/ykwTX9dzrTInkTBTiQU
OyDjKZvR2ACjysuFxvpA2fhhF7KCmCwg7M/YsKyVLKq2r3TdBnDS1DHm7Z5ebNu4
vgV4fsPCnjaQxOHEHZmh+rxG0E2dOGMiCieY9ooJ6jeomKQ+d60=
=cIWS
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20240917' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for IGDs of gen 11 and later
* Coverity fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmbpWl0ACgkQUaNDx8/7
# 7KFYJhAAu8Dyf96RUr4ucu/VaSlTi/rk/i5sivD4EXiCOf2qpQtyoo+C8DJmjAZg
# nC+4IpD2vu2C/xaZoQ4o6uQL7c45dOup59jcbKO+6NekF521Y6aq9OvE5v55CAwu
# R38UWI6ZX5qqyU/tA39/s7migIvCtK7VgTzEs2Lpzw8WetCFattvrEiKHt09fNdX
# kSPdFVV6FymOowAekQtI2JACr8C5nm8x9npzyL1SjauvWA70aOU9h1iHoIxHGKFF
# jlotd6v16c0Z260AUP/RDBwf8wqg2MtwBOI3qVGYD20Xd7tRQkLlFp8X5lNw4pHr
# eylqqxW3E4LJ4vSWpi4Jj2tZN5tZl8X927ew79D2gf69R8f1l+5CG/qqynMRbZ0b
# gE1E5UNfEkXYX9PMuf2uenoiahMxh7ZHwzJmtFcTLGyHGudSaUu3S7Yu5a1R0ZDf
# 8OyzE1E1X/8uCABvSgPphtSfYD9kXKiwNJSPrj3PZ1nXgNoA6BDi5sOeTPm0POBA
# IfB10VEXDd61KPFKGQqZ1Qqrvb0LsCTvFTwCHRHBEB/F/ykwTX9dzrTInkTBTiQU
# OyDjKZvR2ACjysuFxvpA2fhhF7KCmCwg7M/YsKyVLKq2r3TdBnDS1DHm7Z5ebNu4
# vgV4fsPCnjaQxOHEHZmh+rxG0E2dOGMiCieY9ooJ6jeomKQ+d60=
# =cIWS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Sep 2024 11:30:53 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240917' of https://github.com/legoater/qemu:
vfio/igd: correctly calculate stolen memory size for gen 9 and later
vfio/igd: don't set stolen memory size to zero
vfio/igd: add ID's for ElkhartLake and TigerLake
vfio/igd: add new bar0 quirk to emulate BDSM mirror
vfio/igd: use new BDSM register location and size for gen 11 and later
vfio/igd: support legacy mode for all known generations
vfio/igd: return an invalid generation for unknown devices
hw/vfio/pci.c: Use correct type in trace_vfio_msix_early_setup()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The product bs->bl.zone_size * (bs->bl.nr_zones - 1) may overflow
uint32.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-id: 20240917080356.270576-2-frolov@swemel.ru
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have to update the calculation of the stolen memory size because
we've seen devices using values of 0xf0 and above for the graphics mode
select field. The new calculation was taken from the linux kernel [1].
[1] 7c626ce4ba/arch/x86/kernel/early-quirks.c (L455-L460)
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
The stolen memory is required for the GOP (EFI) driver and the Windows
driver. While the GOP driver seems to work with any stolen memory size,
the Windows driver will crash if the size doesn't match the size
allocated by the host BIOS. For that reason, it doesn't make sense to
overwrite the stolen memory size. It's true that this wastes some VM
memory. In the worst case, the stolen memory can take up more than a GB.
However, that's uncommon. Additionally, it's likely that a bunch of RAM
is assigned to VMs making use of GPU passthrough.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
ElkhartLake and TigerLake devices were tested in legacy mode with Linux
and Windows VMs. Both are working properly. It's likely that other Intel
GPUs of gen 11 and 12 like IceLake device are working too. However,
we're only adding known good devices for now.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
The BDSM register is mirrored into MMIO space at least for gen 11 and
later devices. Unfortunately, the Windows driver reads the register
value from MMIO space instead of PCI config space for those devices [1].
Therefore, we either have to keep a 1:1 mapping for the host and guest
address or we have to emulate the MMIO register too. Using the igd in
legacy mode is already hard due to it's many constraints. Keeping a 1:1
mapping may not work in all cases and makes it even harder to use. An
MMIO emulation has to trap the whole MMIO page. This makes accesses to
this page slower compared to using second level address translation.
Nevertheless, it doesn't have any constraints and I haven't noticed any
performance degradation yet making it a better solution.
[1] 5c351bee0f/devicemodel/hw/pci/passthrough.c (L650-L653)
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Intel changed the location and size of the BDSM register for gen 11
devices and later. We have to adjust our emulation for these devices to
properly support them.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
We're soon going to add support for legacy mode to ElkhartLake and
TigerLake devices. Those are gen 11 and 12 devices. At the moment, all
devices identified by our igd_gen function do support legacy mode. This
won't change when adding our new devices of gen 11 and 12. Therefore, it
makes more sense to accept legacy mode for all known devices instead of
maintaining a long list of known good generations. If we add a new
generation to igd_gen which doesn't support legacy mode for some reason,
it'll be easy to advance the check to reject legacy mode for this
specific generation.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Intel changes it's specification quite often e.g. the location and size
of the BDSM register has change for gen 11 devices and later. This
causes our emulation to fail on those devices. So, it's impossible for
us to use a suitable default value for unknown devices. Instead of
returning a random generation value and hoping that everthing works
fine, we should verify that different devices are working and add them
to our list of known devices.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
The tracepoint trace_vfio_msix_early_setup() uses "int" for the type
of the table_bar argument, but we use this to print a uint32_t.
Coverity warns that this means that we could end up treating it as a
negative number.
We only use this in printing the value in the tracepoint, so
mishandling it as a negative number would be harmless, but it's
better to use the right type in the tracepoint. Use uint64_t to
match how we print the table_offset in the vfio_msix_relo()
tracepoint.
Resolves: Coverity CID 1547690
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED SDK add lm75 in i2c bus 0 for AST2700.
LM75 is compatible with TMP105 driver.
Introduce a new i2c init function and
add tmp105 device model in i2c bus 0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Add I2C model for AST2700 I2C support.
The I2C controller registers base address is start at
0x14C0_F000 and its address space is 0x2000.
The AST2700 I2C controller has one source INTC per bus.
I2C buses interrupt are connected to GICINT130_INTC
from bit 0 to bit 15.
I2C bus 0 is connected to GICINT130_INTC at bit 0.
I2C bus 15 is connected to GICINT130_INTC at bit 15.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Currently, users can set the INTC mapping table with
enumerated device id and device irq to get the INTC orgate
input pins. However, some devices use the continuous source numbers in the
same INTC orgate. To reduce the enumerated device id definition,
create a new API to get the INTC orgate input pin
if users only provide the device id with its bus number index.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
The AST2700 support the maximum DRAM size is 8 GB.
The DRAM physical address range is from "0x4_0000_0000" to
"0x5_FFFF_FFFF".
The DRAM offset range is from "0x0_0000_0000" to
"0x1_FFFF_FFFF" and it is enough to use bits [33:0]
saving the dram offset.
Therefore, save the high part physical address bit[1:0]
of Tx/Rx buffer address as dma_dram_offset bit[33:32].
It does not need to decrease the dram physical
high part address for DMA operation.
(high part physical address bit[7:0] – 4)
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
and the base address of dram is "0x4 00000000" which
is 64bits address.
It has "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
registers to save the high part physical address of Tx/Rx
buffer address for master mode.
It has "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
"Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)" registers
to save the high part physical address of Tx/Rx buffer address
for slave mode.
Ex: Tx buffer address for master mode [39:0]
The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
the Tx buffer address.
The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the Tx buffer address.
Introduce a new has_dma64 class attribute and new registers for the
new mode to support DMA 64 bits dram address.
Update new mode register number to 28.
The aspeed_i2c_bus_vmstate is changed again and
version is not increased because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Introduce a new ast2700 class to support AST2700.
The I2C bus register memory regions and
I2C bus pool buffer memory regions are discontinuous
and they do not back compatible AST2600.
Add a new ast2700 i2c class init function to match the
address of I2C bus register and pool buffer from the datasheet.
An I2C controller registers owns 8KB address space.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The "Current DMA Operating Address Status(0x50)" register of
I2C new mode has been removed in AST2700.
This register is used for debugging and it is a read only register.
To support AST2700 DMA mode, introduce a new
dma_dram_offset class attribute in AspeedI2Cbus to save the
current DMA operating address.
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set the dma_dram_offset data type to uint64_t for
64 bits dram address DMA support.
Both "DMA Mode Buffer Address Register(I2CD24 old mode)" and
"DMA Operating Address Status (I2CC50 new mode)" are used for showing the
low part dram offset bits [31:0], so change to read/write both register bits [31:0] in
bus register read/write functions.
The aspeed_i2c_bus_vmstate is changed again and version is not increased
because it was done earlier in the same series.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Peter Maydell