In 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device
assignment"), in case of bypass mode, we transiently enabled the
IOMMU MR to allow the set_page_size_mask() to be called and pass
information about the page size mask constraint of cold plugged
VFIO devices. Now we do not use the IOMMU MR callback anymore, we
can just get rid of this hack.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Everything is now in place to use the Host IOMMU Device callbacks
to retrieve the page size mask usable with a given assigned device.
This new method brings the advantage to pass the info much earlier
to the virtual IOMMU and before the IOMMU MR gets enabled. So let's
remove the call to memory_region_iommu_set_page_size_mask in
vfio common.c and remove the single implementation of the IOMMU MR
callback in the virtio-iommu.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve the Host IOMMU Device page size mask when this latter is set.
This allows to get the information much sooner than when relying on
IOMMU MR set_page_size_mask() call, whcih happens when the IOMMU MR
gets enabled. We introduce check_page_size_mask() helper whose code
is inherited from current virtio_iommu_set_page_size_mask()
implementation. This callback will be removed in a subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The error handle argument is not used anywhere. let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
In case no IOMMUPciBus/IOMMUDevice are found we need to properly
set the error handle and return.
Fixes : Coverity CID 1549006
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
When a VFIO device is hoplugged in a VM using virtio-iommu, IOMMUPciBus
and IOMMUDevice cache entries are created in the .get_address_space()
handler of the machine IOMMU device. However, these entries are never
destroyed, not even when the VFIO device is detached from the machine.
This can lead to an assert if the device is reattached again.
When reattached, the .get_address_space() handler reuses an
IOMMUDevice entry allocated when the VFIO device was first attached.
virtio_iommu_set_host_iova_ranges() is called later on from the
.set_iommu_device() handler an fails with an assert on 'probe_done'
because the device appears to have been already probed when this is
not the case.
The IOMMUDevice entry is allocated in pci_device_iommu_address_space()
called from under vfio_realize(), the VFIO PCI realize handler. Since
pci_device_unset_iommu_device() is called from vfio_exitfn(), a sub
function of the PCIDevice unrealize() handler, it seems that the
.unset_iommu_device() handler is the best place to release resources
allocated at realize time. Clear the IOMMUDevice cache entry there to
fix hotplug.
Fixes: 817ef10da2 ("virtio-iommu: Implement set|unset]_iommu_device() callbacks")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240701101453.203985-1-clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit d152cdd6f6 ("virtio: use virtio accessor to access packed event")
switched using of address_space_read_cached() to virito_lduw_phys_cached()
to access packed descriptor event.
When we used address_space_read_cached(), we needed to call
virtio_tswap16s() to handle the endianess of the field, but
virito_lduw_phys_cached() already handles it internally, so we no longer
need to call virtio_tswap16s() (as the commit had done for `off_wrap`,
but forgot for `flags`).
Fixes: d152cdd6f6 ("virtio: use virtio accessor to access packed event")
Cc: jasowang@redhat.com
Cc: qemu-stable@nongnu.org
Reported-by: Xoykie <xoykie@gmail.com>
Link: https://lore.kernel.org/qemu-devel/CAFU8RB_pjr77zMLsM0Unf9xPNxfr_--Tjr49F_eX32ZBc5o2zQ@mail.gmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240701075208.19634-1-sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VHOST_USER_SET_LOG_BASE requests should be categorized into
non-vring specific messages, and should be sent only once.
If send more than once, dpdk will munmap old log_addr which may has been used and cause segmentation fault.
Signed-off-by: BillXiang <xiangwencheng@dayudpu.com>
Message-Id: <20240613065150.3100-1-xiangwencheng@dayudpu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes LeakSanitizer warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-san-v2-7-750bb0946dbd@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In current code, when guest does S3, virtio-gpu are reset due to the
bit No_Soft_Reset is not set. After resetting, the display resources
of virtio-gpu are destroyed, then the display can't come back and only
show blank after resuming.
Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check
this bit, if this bit is set, the devices resetting will not be done, and
then the display can work after resuming.
No_Soft_Reset bit is implemented for all virtio devices, and was tested
only on virtio-gpu device. Set it false by default for safety.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Message-Id: <20240606102205.114671-3-Jiqian.Chen@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In function kvm_virtio_pci_vector_use_one(), the function will only use
the irqfd/vector for itself. Therefore, in the undo label, the failing
process is incorrect.
To fix this, we can just remove this label.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240528084840.194538-1-lulu@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the vhost-user is reconnecting to the backend, and if the vhost-user fails
at the get_features in vhost_dev_init(), then the reconnect will fail
and it will not be retriggered forever.
The reason is:
When the vhost-user fail at get_features, the vhost_dev_cleanup will be called
immediately.
vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'.
The reconnect path is:
vhost_user_blk_event
vhost_user_async_close(.. vhost_user_blk_disconnect ..)
qemu_chr_fe_set_handlers <----- clear the notifier callback
schedule vhost_user_async_close_bh
The vhost->vdev is null, so the vhost_user_blk_disconnect will not be
called, then the event fd callback will not be reinstalled.
We need to ensure that even if vhost_dev_init initialization fails, the event
handler still needs to be reinstalled when s->connected is false.
All vhost-user devices have this issue, including vhost-user-blk/scsi.
Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling")
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20240516025753.130171-3-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f02a4b8e64.
Since the current patch cannot completely fix the lost reconnect
problem, there is a scenario that is not considered:
- When the virtio-blk driver is removed from the guest os,
s->connected has no chance to be set to false, resulting in
subsequent reconnection not being executed.
The next patch will completely fix this issue with a better approach.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20240516025753.130171-2-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix bug imported by 27ce0f3afc ("fix Power Management Control Register for PCI Express virtio devices"
After this change, observe that QEMU may erroneously clear the power status of the device,
or may erroneously clear non writable registers, such as NO_SOFT_RESET, etc.
Only state of PM_CTRL is writable.
Only when flag VIRTIO_PCI_FLAG_INIT_PM is set, need to reset state.
Fixes: 27ce0f3afc ("fix Power Management Control Register for PCI Express virtio devices"
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Message-Id: <20240515073526.17297-2-Jiqian.Chen@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-1.3 specification
<https://docs.oasis-open.org/virtio/virtio/v1.3/virtio-v1.3.html> writes:
2.8.6 Next Flag: Descriptor Chaining
Buffer ID is included in the last descriptor in the list.
If the feature (_F_INDIRECT_DESC) has been negotiated, install only
one descriptor in the virtqueue.
Therefor the buffer id should be obtained from the first descriptor.
In descriptor chaining scenarios, the buffer id should be obtained
from the last descriptor.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240510072753.26158-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not having VIRTIO_F_RING_PACKED in feature_bits[] is a problem when the
vhost-vsock device does not offer the feature bit VIRTIO_F_RING_PACKED
but the in QEMU device is configured to try to use the packed layout
(the virtio property "packed" is on).
As of today, the Linux kernel vhost-vsock device does not support the
packed queue layout (as vhost does not support packed), and does not
offer VIRTIO_F_RING_PACKED. Thus when for example a vhost-vsock-ccw is
used with packed=on, VIRTIO_F_RING_PACKED ends up being negotiated,
despite the fact that the device does not actually support it, and
one gets to keep the pieces.
Fixes: 74b3e46630 ("virtio: add property to enable packed virtqueue")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20240429113334.2454197-1-pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for the VIRTIO_F_NOTIFICATION_DATA feature across a variety
of vhost devices.
The inclusion of VIRTIO_F_NOTIFICATION_DATA in the feature bits arrays
for these devices ensures that the backend is capable of offering and
providing support for this feature, and that it can be disabled if the
backend does not support it.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-6-jonah.palmer@oracle.com>
Acked-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-mmio devices for handling the extra data sent from
the driver to the device when the VIRTIO_F_NOTIFICATION_DATA transport
feature has been negotiated.
The extra data that's passed to the virtio-mmio device when this feature
is enabled varies depending on the device's virtqueue layout.
The data passed to the virtio-mmio device is in the same format as the
data passed to virtio-pci devices.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prevent the realization of a virtio device that attempts to use the
VIRTIO_F_NOTIFICATION_DATA transport feature without disabling
ioeventfd.
Due to ioeventfd not being able to carry the extra data associated with
this feature, having both enabled is a functional mismatch and therefore
Qemu should not continue the device's realization process.
Although the device does not yet know if the feature will be
successfully negotiated, many devices using this feature wont actually
work without this extra data and would fail FEATURES_OK anyway.
If ioeventfd is able to work with the extra notification data in the
future, this compatibility check can be removed.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-pci devices for handling the extra data sent
from the driver to the device when the VIRTIO_F_NOTIFICATION_DATA
transport feature has been negotiated.
The extra data that's passed to the virtio-pci device when this
feature is enabled varies depending on the device's virtqueue
layout.
In a split virtqueue layout, this data includes:
- upper 16 bits: shadow_avail_idx
- lower 16 bits: virtqueue index
In a packed virtqueue layout, this data includes:
- upper 16 bits: 1-bit wrap counter & 15-bit shadow_avail_idx
- lower 16 bits: virtqueue index
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-2-jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On setups with one or more virtio-net devices with vhost on,
dirty tracking iteration increases cost the bigger the number
amount of queues are set up e.g. on idle guests migration the
following is observed with virtio-net with vhost=on:
48 queues -> 78.11% [.] vhost_dev_sync_region.isra.13
8 queues -> 40.50% [.] vhost_dev_sync_region.isra.13
1 queue -> 6.89% [.] vhost_dev_sync_region.isra.13
2 devices, 1 queue -> 18.60% [.] vhost_dev_sync_region.isra.14
With high memory rates the symptom is lack of convergence as soon
as it has a vhost device with a sufficiently high number of queues,
the sufficient number of vhost devices.
On every migration iteration (every 100msecs) it will redundantly
query the *shared log* the number of queues configured with vhost
that exist in the guest. For the virtqueue data, this is necessary,
but not for the memory sections which are the same. So essentially
we end up scanning the dirty log too often.
To fix that, select a vhost device responsible for scanning the
log with regards to memory sections dirty tracking. It is selected
when we enable the logger (during migration) and cleared when we
disable the logger. If the vhost logger device goes away for some
reason, the logger will be re-selected from the rest of vhost
devices.
After making mem-section logger a singleton instance, constant cost
of 7%-9% (like the 1 queue report) will be seen, no matter how many
queues or how many vhost devices are configured:
48 queues -> 8.71% [.] vhost_dev_sync_region.isra.13
2 devices, 8 queues -> 7.97% [.] vhost_dev_sync_region.isra.14
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
There could be a mix of both vhost-user and vhost-kernel clients
in the same QEMU process, where separate vhost loggers for the
specific vhost type have to be used. Make the vhost logger per
backend type, and have them properly reference counted.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-1-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we use PCIIOMMUOps to convey information about usable IOVA
ranges we do not to implement the iommu_set_iova_ranges IOMMU MR
callback.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Compute the host reserved regions in virtio_iommu_set_iommu_device().
The usable IOVA regions are retrieved from the HostIOMMUDevice.
The virtio_iommu_set_host_iova_ranges() helper turns usable regions
into complementary reserved regions while testing the inclusion
into existing ones. virtio_iommu_set_host_iova_ranges() reuse the
implementation of virtio_iommu_set_iova_ranges() which will be
removed in subsequent patches. rebuild_resv_regions() is just moved.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement PCIIOMMUOPs [set|unset]_iommu_device() callbacks.
In set(), the HostIOMMUDevice handle is stored in a hash
table indexed by PCI BDF. The object will allow to retrieve
information related to the physical IOMMU.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
'legacy_align' is always NULL, remove it, simplifying
memory_device_pre_plug().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-16-philmd@linaro.org>
Generalize the current 1 byte unit and 4 byte blocking
within the output.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240412073346.458116-5-richard.henderson@linaro.org>
Allocate a new, or append to an existing GString instead of
using a fixed sized buffer. Require the caller to determine
the length of the line -- do not bound len here.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240412073346.458116-4-richard.henderson@linaro.org>
Split out asciidump_line as a separate function, local to hexdump.c,
for use by qemu_hexdump. Use "%-*s" to generate the alignment
between the hex and the ascii, rather than explicit spaces.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Require that the caller output the offset and increment bufptr.
Use QEMU_HEXDUMP_LINE_BYTES in vhost_vdpa_dump_config instead
of raw integer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Let the callers do the reporting. This will be useful in
vfio_iommu_map_dirty_notify().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We usually check target endianess before swapping values,
so target_words_bigendian() declaration makes sense in
"exec/tswap.h" with the target swapping helpers.
Remove "hw/core/cpu.h" when it was only included to get
the target_words_bigendian() declaration.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
=pJmQ
-----END PGP SIGNATURE-----
Merge tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.1
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
# fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
# =pJmQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 03:37:19 PM PDT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration/colo: Fix bdrv_graph_rdlock_main_loop: Assertion `!qemu_in_coroutine()' failed.
migration/multifd: solve zero page causing multiple page faults
migration: Add Error** argument to add_bitmaps_to_list()
migration: Modify ram_init_bitmaps() to report dirty tracking errors
migration: Add Error** argument to xbzrle_init()
migration: Add Error** argument to ram_state_init()
memory: Add Error** argument to the global_dirty_log routines
migration: Introduce ram_bitmaps_destroy()
memory: Add Error** argument to .log_global_start() handler
migration: Add Error** argument to .load_setup() handler
migration: Add Error** argument to .save_setup() handler
migration: Add Error** argument to qemu_savevm_state_setup()
migration: Add Error** argument to vmstate_save()
migration: Always report an error in ram_save_setup()
migration: Always report an error in block_save_setup()
vfio: Always report an error in vfio_save_setup()
s390/stattrib: Add Error** argument to set_migrationmode() handler
tests/qtest/migration: Fix typo for vsock in SocketAddress_to_str
tests/qtest/migration: Add negative tests to validate migration QAPIs
tests/qtest/migration: Add multifd_tcp_plain test using list of channels instead of uri
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Modify all .log_global_start() handlers to take an Error** parameter
and return a bool. Adapt memory_global_dirty_log_start() to interrupt
on the first error the loop on handlers. In such case, a rollback is
performed to stop dirty logging on all listeners where it was
previously enabled.
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240320064911.545001-10-clg@redhat.com
[peterx: modify & enrich the comment for listener_add_address_space() ]
Signed-off-by: Peter Xu <peterx@redhat.com>
Since the virtio memory device stubs are needed exactly when the
Kconfig symbol is not enabled, they can be placed in hw/virtio/ and
conditionalized on CONFIG_VIRTIO_MD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A last minute fix for a use of a vector after it's released.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmYdBssPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpTHcH/Rtl2jNJ5myZOuEylw+T6/GSvyEne6CoreHK
zUNPxmXY+uJzCskXkJXyd4uIaci5iIH1JC9Tc0FzFYaYrTsoA1dlQridqoajKyN5
E6zjKqepi3sLnvDE1VbZ1kVcNEX2xSAFX++iv4Rbn4HHO49yKR0jNajusTOsq505
NObgNQXK/Yj1q0IXYrWDETV7xywpQqiiAzwnmhi6ac72+trqmPrUXnUulhitWR3K
iZBuGxAHn9c/ilW3J4FeSbqe6sC/AhqUz3RSM6dB+rkpvA0E675T526uVMWxND2H
auE+ou0kzZ8HNit3AHBg8316seHXzWP+ndVEZlifX33HoR1pltY=
=H3M5
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: bugfix
A last minute fix for a use of a vector after it's released.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmYdBssPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpTHcH/Rtl2jNJ5myZOuEylw+T6/GSvyEne6CoreHK
# zUNPxmXY+uJzCskXkJXyd4uIaci5iIH1JC9Tc0FzFYaYrTsoA1dlQridqoajKyN5
# E6zjKqepi3sLnvDE1VbZ1kVcNEX2xSAFX++iv4Rbn4HHO49yKR0jNajusTOsq505
# NObgNQXK/Yj1q0IXYrWDETV7xywpQqiiAzwnmhi6ac72+trqmPrUXnUulhitWR3K
# iZBuGxAHn9c/ilW3J4FeSbqe6sC/AhqUz3RSM6dB+rkpvA0E675T526uVMWxND2H
# auE+ou0kzZ8HNit3AHBg8316seHXzWP+ndVEZlifX33HoR1pltY=
# =H3M5
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 Apr 2024 11:51:55 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio-pci: fix use of a released vector
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During the booting process of the non-standard image, the behavior of the
called function in qemu is as follows:
1. vhost_net_stop() was triggered by guest image. This will call the function
virtio_pci_set_guest_notifiers() with assgin= false,
virtio_pci_set_guest_notifiers(） will release the irqfd for vector 0
2. virtio_reset() was triggered, this will set configure vector to VIRTIO_NO_VECTOR
3.vhost_net_start() was called (at this time, the configure vector is
still VIRTIO_NO_VECTOR) and then call virtio_pci_set_guest_notifiers() with
assgin=true, so the irqfd for vector 0 is still not "init" during this process
4. The system continues to boot and sets the vector back to 0. After that
msix_fire_vector_notifier() was triggered to unmask the vector 0 and meet the crash
To fix the issue, we need to support changing the vector after VIRTIO_CONFIG_S_DRIVER_OK is set.
(gdb) bt
0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0)
at pthread_kill.c:44
1 0x00007fc87148ec53 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78
2 0x00007fc87143e956 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
3 0x00007fc8714287f4 in __GI_abort () at abort.c:79
4 0x00007fc87142871b in __assert_fail_base
(fmt=0x7fc8715bbde0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x5606413efd53 "ret == 0", file=0x5606413ef87d "../accel/kvm/kvm-all.c", line=1837, function=<optimized out>) at assert.c:92
5 0x00007fc871437536 in __GI___assert_fail
(assertion=0x5606413efd53 "ret == 0", file=0x5606413ef87d "../accel/kvm/kvm-all.c", line=1837, function=0x5606413f06f0 <__PRETTY_FUNCTION__.19> "kvm_irqchip_commit_routes") at assert.c:101
6 0x0000560640f884b5 in kvm_irqchip_commit_routes (s=0x560642cae1f0) at ../accel/kvm/kvm-all.c:1837
7 0x0000560640c98f8e in virtio_pci_one_vector_unmask
(proxy=0x560643c65f00, queue_no=4294967295, vector=0, msg=..., n=0x560643c6e4c8)
at ../hw/virtio/virtio-pci.c:1005
8 0x0000560640c99201 in virtio_pci_vector_unmask (dev=0x560643c65f00, vector=0, msg=...)
at ../hw/virtio/virtio-pci.c:1070
9 0x0000560640bc402e in msix_fire_vector_notifier (dev=0x560643c65f00, vector=0, is_masked=false)
at ../hw/pci/msix.c:120
10 0x0000560640bc40f1 in msix_handle_mask_update (dev=0x560643c65f00, vector=0, was_masked=true)
at ../hw/pci/msix.c:140
11 0x0000560640bc4503 in msix_table_mmio_write (opaque=0x560643c65f00, addr=12, val=0, size=4)
at ../hw/pci/msix.c:231
12 0x0000560640f26d83 in memory_region_write_accessor
(mr=0x560643c66540, addr=12, value=0x7fc86b7bc628, size=4, shift=0, mask=4294967295, attrs=...)
at ../system/memory.c:497
13 0x0000560640f270a6 in access_with_adjusted_size
(addr=12, value=0x7fc86b7bc628, size=4, access_size_min=1, access_size_max=4, access_fn=0x560640f26c8d <memory_region_write_accessor>, mr=0x560643c66540, attrs=...) at ../system/memory.c:573
14 0x0000560640f2a2b5 in memory_region_dispatch_write (mr=0x560643c66540, addr=12, data=0, op=MO_32, attrs=...)
at ../system/memory.c:1521
15 0x0000560640f37bac in flatview_write_continue
(fv=0x7fc65805e0b0, addr=4273803276, attrs=..., ptr=0x7fc871e9c028, len=4, addr1=12, l=4, mr=0x560643c66540)
at ../system/physmem.c:2714
16 0x0000560640f37d0f in flatview_write
(fv=0x7fc65805e0b0, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4) at ../system/physmem.c:2756
17 0x0000560640f380bf in address_space_write
(as=0x560642161ae0 <address_space_memory>, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4)
at ../system/physmem.c:2863
18 0x0000560640f3812c in address_space_rw
(as=0x560642161ae0 <address_space_memory>, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4, is_write=true) at ../system/physmem.c:2873
--Type <RET> for more, q to quit, c to continue without paging--
19 0x0000560640f8aa55 in kvm_cpu_exec (cpu=0x560642f205e0) at ../accel/kvm/kvm-all.c:2915
20 0x0000560640f8d731 in kvm_vcpu_thread_fn (arg=0x560642f205e0) at ../accel/kvm/kvm-accel-ops.c:51
21 0x00005606411949f4 in qemu_thread_start (args=0x560642f292b0) at ../util/qemu-thread-posix.c:541
22 0x00007fc87148cdcd in start_thread (arg=<optimized out>) at pthread_create.c:442
23 0x00007fc871512630 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
(gdb)
MST: coding style and typo fixups
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-ID: <2321ade5f601367efe7380c04e3f61379c59b48f.1713173550.git.mst@redhat.com>
Cc: Lei Yang <leiyang@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Cindy Lu <lulu@redhat.com>
Replace qemu_bh_new_guarded() by virtio_bh_new_guarded()
so the bus and device use the same guard. Otherwise the
DMA-reentrancy protection can be bypassed.
Fixes: CVE-2024-3446
Cc: qemu-stable@nongnu.org
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-5-philmd@linaro.org>
Introduce virtio_bh_new_guarded(), similar to qemu_bh_new_guarded()
but using the transport memory guard, instead of the device one
(there can only be one virtio device per virtio bus).
Inspired-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-2-philmd@linaro.org>
The set_config callback function vhost_vdpa_device_get_config in
vdpa-dev does not fetch the current device status from the hardware
device, causing the guest os to not receive the latest device status
information.
The hardware updates the config status of the vdpa device and then
notifies the os. The guest os receives an interrupt notification,
triggering a get_config access in the kernel, which then enters qemu
internally. Ultimately, the vhost_vdpa_device_get_config function of
vdpa-dev is called
One scenario encountered is when the device needs to bring down the
vdpa net device. After modifying the status field of virtio_net_config
in the hardware, it sends an interrupt notification. However, the guest
os always receives the STATUS field as VIRTIO_NET_S_LINK_UP.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240408020003.1979-1-yuxue.liu@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the event of writing many chains of descriptors, the device must
write just the id of the last buffer in the descriptor chain, skip
forward the number of descriptors in the chain, and then repeat the
operations for the rest of chains.
Current QEMU code writes all the buffer ids consecutively, and then
skips all the buffers altogether. This is a bug, and can be reproduced
with a VirtIONet device with _F_MRG_RXBUB and without
_F_INDIRECT_DESC:
If a virtio-net device has the VIRTIO_NET_F_MRG_RXBUF feature
but not the VIRTIO_RING_F_INDIRECT_DESC feature,
'VirtIONetQueue->rx_vq' will use the merge feature
to store data in multiple 'elems'.
The 'num_buffers' in the virtio header indicates how many elements are merged.
If the value of 'num_buffers' is greater than 1,
all the merged elements will be filled into the descriptor ring.
The 'idx' of the elements should be the value of 'vq->used_idx' plus 'ndescs'.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Message-Id: <20240407015451.5228-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit cd341fd1ff.
The patch adds non-upstream code in
include/standard-headers/linux/virtio_pci.h
which would make maintainance harder.
Revert for now.
Suggested-by: Jason Wang <jasowang@redhat.com>
Message-Id: <df6b6b465753e754a19459e8cd61416548f89a42.1712569644.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VDUSE requires that virtqueues are first enabled before the DRIVER_OK
status flag is set; with the current API of the kernel module, it is
impossible to enable the opposite order in our block export code because
userspace is not notified when a virtqueue is enabled.
This requirement also mathces the normal initialisation order as done by
the generic vhost code in QEMU. However, commit 6c482547 accidentally
changed the order for vdpa-dev and broke access to VDUSE devices with
this.
This changes vdpa-dev to use the normal order again and use the standard
vhost callback .vhost_set_vring_enable for this. VDUSE devices can be
used with vdpa-dev again after this fix.
vhost_net intentionally avoided enabling the vrings for vdpa and does
this manually later while it does enable them for other vhost backends.
Reflect this in the vhost_net code and return early for vdpa, so that
the behaviour doesn't change for this device.
Cc: qemu-stable@nongnu.org
Fixes: 6c4825476a ('vdpa: move vhost_vdpa_set_vring_ready to the caller')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240315155949.86066-1-kwolf@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
+jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
=C0UU
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
aw-bits is a new option that allows to set the bit width of
the input address range. This value will be used as a default for
the device config input_range.end. By default it is set to 64 bits
which is the current value.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240307134445.92296-7-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use %u format to trace domain_range limits.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240307134445.92296-6-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set the default granule to 4KB but with VFIO assignment
it makes more sense to use the actual host page size.
Indeed when hotplugging a VFIO device protected by a virtio-iommu
on a 64kB/64kB host/guest config, we current get a qemu crash:
"vfio: DMA mapping failed, unable to continue"
This is due to the hot-attached VFIO device calling
memory_region_iommu_set_page_size_mask() with 64kB granule
whereas the virtio-iommu granule was already frozen to 4KB on
machine init done.
Set the granule property to "host" and introduce a new compat.
The page size mask used before 9.0 was qemu_target_page_mask().
Since the virtio-iommu currently only supports x86_64 and aarch64,
this matched a 4KB granule.
Note that the new default will prevent 4kB guest on 64kB host
because the granule will be set to 64kB which would be larger
than the guest page size. In that situation, the virtio-iommu
driver fails on viommu_domain_finalise() with
"granule 0x10000 larger than system page size 0x1000".
In that case the workaround is to request 4K granule.
The current limitation of global granule in the virtio-iommu
should be removed and turned into per domain granule. But
until we get this upgraded, this new default is probably
better because I don't think anyone is currently interested in
running a 4KB page size guest with virtio-iommu on a 64KB host.
However supporting 64kB guest on 64kB host with virtio-iommu and
VFIO looks a more important feature.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240307134445.92296-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows to choose which granule will be used by
default by the virtio-iommu. Current page size mask
default is qemu_target_page_mask so this translates
into a 4k granule on ARM and x86_64 where virtio-iommu
is supported.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240307134445.92296-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for VDPA network simulation devices.
The device is developed based on virtio-net and tap backend,
and supports hardware live migration function.
For more details, please refer to "docs/system/devices/vdpa-net.rst"
Signed-off-by: Hao Chen <chenh@yusur.tech>
Message-Id: <20240221073802.2888022-1-chenh@yusur.tech>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shared objects lack spoofing protection.
For VHOST_USER_BACKEND_SHARED_OBJECT_REMOVE messages
received by the vhost-user interface, any backend was
allowed to remove entries from the shared table just
by knowing the UUID. Only the owner of the entry
shall be allowed to removed their resources
from the table.
To fix that, add a check for all
*SHARED_OBJECT_REMOVE messages received.
A vhost device can only remove TYPE_VHOST_DEV
entries that are owned by them, otherwise skip
the removal, and inform the device that the entry
has not been removed in the answer.
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20240219143423.272012-2-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes, certain parts are not being skipped in
vhost_vdpa_listener_region_del, but they are skipped in
vhost_vdpa_listener_region_add, or vice versa. The vhost-vdpa code
expects all parts to maintain their properties, so we're adding a trace
to help with debugging when any part is skipped.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240215103616.330518-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next changes uses this variables, so avoid call repeatedly to memory
region functions. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240215103616.330518-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix an issue where cancellation of ongoing migration ends up
with no network connectivity.
When canceling migration, SVQ will be switched back to the
passthrough mode, but the right call fd is not programed to
the device and the svq's own call fd is still used. At the
point of this transitioning period, the shadow_vqs_enabled
hadn't been set back to false yet, causing the installation
of call fd inadvertently bypassed.
Message-Id: <1707910082-10243-13-git-send-email-si-wei.liu@oracle.com>
Fixes: a8ac88585d ("vhost: Add Shadow VirtQueue call forwarding capabilities")
Cc: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For better debuggability and observability.
Message-Id: <1707910082-10243-8-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For better debuggability and observability.
Message-Id: <1707910082-10243-7-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generalize duplicated condition check for the last vq of vdpa
device to a common function.
Message-Id: <1707910082-10243-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Prefer fast cpu_env() over slower CPU QOM cast macro
-----BEGIN PGP SIGNATURE-----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=NiP4
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into staging
* Add missing ERRP_GUARD() statements in functions that need it
* Prefer fast cpu_env() over slower CPU QOM cast macro
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32
# SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s
# wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D
# bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9
# Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE
# jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8
# yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6
# zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf
# zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m
# 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq
# wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7
# tdFhV0iRr08=
# =NiP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits)
user: Prefer fast cpu_env() over slower CPU QOM cast macro
target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro
target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro
target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro
target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro
target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro
target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro
target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro
target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro
target/i386/hvf: Use CPUState typedef
target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro
target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro
target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro
target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro
target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler
bulk: Call in place single use cpu_env()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/virtio/vhost.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- vhost_save_backend_state()
- vhost_load_backend_state()
Their @errp both points to callers' @local_err. However, as the APIs
defined in include/hw/virtio/vhost.h, it is necessary to protect their
@errp with ERRP_GUARD().
To follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-27-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vhost_vsock_device_realize() passes @errp to error_prepend(), and as
a VirtioDeviceClass.realize method, its @errp is from
DeviceClass.realize so that there is no guarantee that the @errp won't
point to @error_fatal.
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-26-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A small number of migration options are accessed by migration clients,
but to see them clients must include all of options.h, which is mostly
for migration core code. migrate_mode() in particular will be needed by
multiple clients.
Refactor the option declarations so clients can see the necessary few via
misc.h, which already exports a portion of the client API.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Remove the error object from opaque data passed to notifiers.
Use the new error parameter passed to the notifier instead.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Pass an error object as the third parameter to "notifier with return"
notifiers, so clients no longer need to bundle an error object in the
opaque data. The new parameter is used in a later patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
s->iommu_pcibus_by_bus_num is a IOMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to endpoint binding to wrong iommu MR in
virtio_iommu_get_endpoint(), then vfio device setup wrong
mapping from other device.
Remove the memset in virtio_iommu_device_realize() to avoid
redundancy with memset in system reset.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-2-zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch derives vhost-user-input from vhost-user-base class, so make
the input stub as a simpler boilerplate wrapper.
With the refactoring, vhost-user-input adds the property 'chardev', this
leads to conflict with the vhost-user-input-pci adds the same property.
To resolve the error, remove the duplicate property from
vhost-user-input-pci.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-5-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-input is in the input folder. On the other hand, the folder
'hw/virtio' maintains other virtio stubs (e.g. I2C, RNG, GPIO, etc).
This patch moves vhost-user-input into the virtio folder for better code
organization. No functionality change.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-4-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Virtio input device invokes set_config() callback for retrieving
the event configuration info, but the callback is not supported in
vhost-user-base.
This patch adds support set_config() callback in vhost-user-base.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231120043721.50555-2-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-9-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of the new base class and make
vhost-user-i2c a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of our new base class and make
vhost-user-rng a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are about to convert at least one stubs which was using the async
teardown so lets use it for all the cases.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lets keep a cleaner split between the base class and the derived
vhost-user-device which we can use for generic vhost-user stubs. This
includes an update to introduce the vq_size property so the number of
entries in a virtq can be defined.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During drain, we do not care about virtqueue notifications, which is why
we remove the handlers on it. When removing those handlers, whether vq
notifications are enabled or not depends on whether we were in polling
mode or not; if not, they are enabled (by default); if so, they have
been disabled by the io_poll_start callback.
Because we do not care about those notifications after removing the
handlers, this is fine. However, we have to explicitly ensure they are
enabled when re-attaching the handlers, so we will resume receiving
notifications. We do this in virtio_queue_aio_attach_host_notifier*().
If such a function is called while we are in a polling section,
attaching the notifiers will then invoke the io_poll_start callback,
re-disabling notifications.
Because we will always miss virtqueue updates in the drained section, we
also need to poll the virtqueue once after attaching the notifiers.
Buglink: https://issues.redhat.com/browse/RHEL-3934
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git acpi include/hw/*/*acpi.h hw/*/*acpi.c
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
RISC-V also needs to create the virtio in DSDT in the same way as ARM.
So, instead of duplicating the code, move this function to the device
specific file which is common across architectures.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231218150247.466427-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since qemu_prealloc_mem() returns whether or not an error
occured, we don't need to check the @errp pointer. Remove
local_err uses when we can return directly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-20-philmd@linaro.org>
CONFIG_ALL is tricky to use and was ported over to Meson from the
recursive processing of Makefile variables. Meson sourcesets
however have all_sources() and all_dependencies() methods that
remove the need for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the memory listener to a common place rather than always in the
first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-14-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The memory listener functions can call these too. Make vdpa_iommu work
with VhostVDPAShared.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-13-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The callers only have the shared information by the end of this series.
Start converting this functions.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-12-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iommu_list member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-11-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is always VHOST_IOTLB_MSG_V2. We can always make it back per
vhost_dev if needed.
This change makes easier for vhost_vdpa_map and unmap not to depend on
vhost_vdpa but only in VhostVDPAShared.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-10-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the backend_cap member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-9-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iotlb_batch_begin_sent member to VhostVDPAShared so all
vhost_vdpa can use it, rather than always in the first / last
vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-8-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the file descriptor to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first / last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-7-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By the end of this series dma_map and dma_unmap functions don't have the
vdpa device for tracing. Movinge trace function to shared member one.
Print it also in the vdpa initialization so log reader can relate them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-6-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the shadow_data member to VhostVDPAShared so all vhost_vdpa can use
it, rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova range to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-4-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will register the vhost_vdpa memory listener while the VM
is migrating at the destination, so we can map the memory to the device
before stopping the VM at the source. The main goal is to reduce the
downtime.
However, the destination QEMU is unaware of which vhost_vdpa device will
register its memory_listener. If the source guest has CVQ enabled, it
will be the CVQ device. Otherwise, it will be the first one.
Move the iova tree to VhostVDPAShared so all vhost_vdpa can use it,
rather than always in the first or last vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231221174322.3130442-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next commits will set DRIVER and ACKNOWLEDGE flags repeatedly in the
case of a migration destination. Let's save ioctls with this.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231215172830.2540987-2-eperezma@redhat.com>
This adds the vhost backend callouts for the worker ioctls added in the
6.4 linux kernel commit:
c1ecd8e95007 ("vhost: allow userspace to create workers")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204231618.21962-2-michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since the driver doesn't support interrupts, we must return early when
index is set to VIRTIO_CONFIG_IRQ_IDX. Basically the same thing Viresh
did for "91208dd297f2 virtio: i2c: Check notifier helpers for
VIRTIO_CONFIG_IRQ_IDX".
Fixes: 544f0278af ("virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20231025171841.3379663-1-mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eric Auger