visualboyadvance-m/installdeps

#!/bin/sh

main() {
    cd "$(dirname $0)"

    while [ $# -gt 0 ]; do
        case "$1" in
            -h|--help|--usage)
                usage
                quit 0
                ;;
            *)
                break
                ;;
        esac
    done

    if [ $# -gt 1 ]; then
        usage
        quit 1
    fi

    target=$1

    mktmp

    case "$(uname -s)" in
        Linux)
            linux_installdeps
            ;;
        Darwin)
            osx_installdeps
            ;;
        MINGW*|MSYS*)
            msys2_installdeps
            ;;
        *)
            error "Don't know how to install deps on your OS"
            ;;
    esac

    quit 0
}

mktmp() {
    tmp="/tmp/installdeps_$$"
    mkdir "$tmp" || quit 1
    chmod 700 "$tmp" 2>/dev/null
    trap "quit 1" PIPE HUP INT QUIT ILL TRAP KILL BUS TERM
}

quit() {
    [ -n "$tmp" ] && rm -rf "$tmp" 2>/dev/null
    exit ${1:-0}
}

usage() {
    cat <<'EOF'
Usage: ./installdeps [TARGET]
Try to install the dependencies needed for this project appropriately on the
host OS.

This program may require sudo.

A cross-compile target may be specified as the only parameter, of either
MinGW-w64-i686 or MinGW-w64-x86_64.
This is only supported on Arch Linux and MSYS2.

OPn MSYS2 dependencies are installed for both 32 and 64 bit native Windows
targets by default, unless you specify one or the other. MSYS2 layer builds are
not supported.

  -h, --help, --usage                Show this help screen and exit.

Examples:
  ./installdeps                        # install dependencies for a host build
  ./installdeps MinGW-w64-i686         # cross-compile for 32 bit windows (Arch Linux or MSYS2)
  ./installdeps MinGW-w64-x86_64       # cross-compile for 64 bit windows (Arch Linux or MSYS2)
EOF
}

error() {
    printf '\nERROR: %s.\n\n' "$1" >&2
    [ -z "$2" ] && quit 1
}

warning() {
    printf '\nWARNING: %s.\n\n' "$1" >&2
}


info_msg() {
    printf '\nINFO: %s.\n\n' "$1" >&2
}

installing() {
    echo 'Installing deps....'
    echo
}

check() {
    "$@"
    if [ $? -ne 0 ]; then
        error 'command failed' NOQUIT
        printf '%s:\n' 'The failing command was' 
        echo "$@"
        quit 1
    fi
}

countdown() {
    secs=$1
    echo
    while [ "$secs" -ne 0 ]; do
        printf '%s\r' "Starting in $secs seconds..."
        sleep 1
        secs=$((secs-1))
    done
    printf '\n\n'
}

linux_installdeps() {
    if [ -f /etc/debian_version ]; then
        debian_installdeps
    elif [ -f /etc/arch-release ]; then
        archlinux_installdeps
    else
        error "Don't know how to install deps on your version of Linux"
    fi
}

check_cross() {
    [ -z "$target" ] && return

    if [ -z "$arch_linux" -a -z "$msys2" ]; then
        error 'cross compiling targets are only supported on Arch Linux and MSYS2 at the moment'
    fi

    target=$(echo "$target" | tr 'A-Z' 'a-z')

    case "$target" in
        mingw-w64-x86_64)
            ;;
        mingw-w64-i686)
            ;;
        *)
            error "target must be one of 'MinGW-w64-i686' or 'MinGW-w64-x86_64'"
            ;;
    esac
}

debian_installdeps() {
    check_cross
    installing

    check sudo apt-get -y update
    check sudo apt-get -y install build-essential g++ zlib1g-dev libgl1-mesa-dev cmake libavcodec-dev libavformat-dev libswscale-dev libavutil-dev libgettextpo-dev libjpeg-dev libpng16-dev libtiff5-dev libsdl2-dev libsfml-dev libopenal-dev libwxgtk3.0-dev

    generic_build_instructions
}

archlinux_installdeps() {
    arch_linux=1

    pacman='sudo pacman'
    command -v pacaur >/dev/null && pacman='pacaur --noedit'
    command -v yaourt >/dev/null && pacman='yaourt --aur --m-arg=--skipinteg'

    check_cross
    installing

    # check for gcc-multilib
    gcc_pkg=gcc
    if $pacman -Q gcc-multilib >/dev/null 2>&1; then
        gcc_pkg=gcc-multilib
    fi

    # update catalogs
    check $pacman -Sy

    if [ -z "$target" ]; then
        # native build
        check $pacman --noconfirm --needed -S base-devel "$gcc_pkg" nasm zlib mesa cairo cmake ffmpeg gettext libpng libtiff pkg-config sdl2 sfml openal wxgtk
    else
        # windows cross build
        case "$target" in
            *i686*)
                cmake_flags='-DCMAKE_TOOLCHAIN_FILE=../CMakeScripts/Toolchain-cross-MinGW-w64-i686.cmake -DENABLE_LINK=NO'
                ;;
            *x86_64*)
                cmake_flags='-DCMAKE_TOOLCHAIN_FILE=../CMakeScripts/Toolchain-cross-MinGW-w64-x86_64.cmake -DENABLE_LINK=NO'
                ;;
            *)
                # this will never be reached, it's checked in check_cross()
                error 'unknown cross target'
                ;;
        esac

        # base devel packages
        check $pacman --noconfirm --needed -S base-devel "$gcc_pkg" nasm cmake git

        # now install yaourt if we don't have it
        if ! command -v yaourt >/dev/null; then
            (
                cd "$tmp"
                git clone https://aur.archlinux.org/package-query.git
                cd package-query
                makepkg --noconfirm -si
                cd ..
                git clone https://aur.archlinux.org/yaourt.git
                cd yaourt
                makepkg --noconfirm -si
            )
            [ $? -ne 0 ] && error 'could not install yaourt'
        fi
        pacman='yaourt --aur --m-arg=--skipinteg'

        pkg_prefix='mingw-w64-'

        # cross toolchain (without headers and crt, we'll use -git versions)
        set --
        for p in binutils gcc winpthreads; do
            set -- "$@" "${pkg_prefix}${p}"
        done
        check $pacman --noconfirm --needed -S "$@"

        # build library deps from AUR

        info_msg 'We will now build dependencies from AUR, this will take quite a while and has a high probability of failure. In fact, it is definitely broken at the time of this writing. Press CTRL-C now to abort'

        countdown 16

        # pass appropriate make -jX flag through makepkg
        export MAKEPKG_CONF=${MAKEPKG_CONF:-/etc/makepkg.conf}

        grep -Ev '^[ 	]*MAKEFLAGS=' "$MAKEPKG_CONF" > "$tmp/makepkg.conf"

        export MAKEFLAGS="-j$(($(cat /proc/cpuinfo | grep -E '^processor	' | wc -l)+1))"
        echo "MAKEFLAGS=\"$MAKEFLAGS\"" >> "$tmp/makepkg.conf"

        export MAKEPKG_CONF="$tmp/makepkg.conf"

        # now do the AUR builds

        # first we need -headers-git and -crt-git (unless the non-git packages are installed)
        for p in "${pkg_prefix}headers" "${pkg_prefix}crt"; do
          if ! $pacman -Q "$p" >/dev/null 2>&1; then
              check $pacman --noconfirm --needed -S "${p}-git"
          else
              warning "${pkg_prefix}headers-git and ${pkg_prefix}crt-git are recommended over the regular versions, if you have build failures try to install them"
          fi
        done

        # and the actual deps
        for p in zlib gettext libpng libtiff pkg-config sdl2 openal wxmsw; do
            pkg="${pkg_prefix}${p}"
            # check if already installed
            if ! $pacman -Q "$pkg" >/dev/null 2>&1; then
                set -- "$@" "${pkg_prefix}${p}"
            fi
        done
        [ $# -gt 0 ] && check $pacman --noconfirm --needed -S "$@"

        warning 'SFML is required for LINK support, the SFML package in AUR is currently broken, if you want LINK support you will need to install it manually'
    fi

    generic_build_instructions
}

msys2_installdeps() {
    msys2=1

    check_cross
    installing

    # update catalogs
    check pacman -Sy

    set --
    for p in SDL2 cairo ffmpeg openal sfml wxWidgets zlib binutils cmake crt-git extra-cmake-modules gcc gcc-libs gdb headers-git make pkg-config tools-git windows-default-manifest libmangle-git nasm; do
        if [ -n "$target" ]; then
            if ! pacman -Q "${target}-${p}" >/dev/null 2>&1; then
                set -- "$@" "${target}-${p}"
            fi
        else
            # install both 32 and 64 bit versions
            for p_ in "mingw-w64-x86_64-$p" "mingw-w64-i686-$p"; do
                if ! pacman -Q "$p_" >/dev/null 2>&1; then
                    set -- "$@" "$p_"
                fi
            done
        fi
    done

    # install
    check pacman --noconfirm --needed -S git make zip "$@"

    check git submodule update --init --recursive

    cmake_flags="-G 'MSYS Makefiles'"

    generic_build_instructions
}

osx_installdeps() {
    if ! xcode-select -p >/dev/null 2>&1 && \
       ! pkgutil --pkg-info=com.apple.pkg.CLTools_Executables >/dev/null 2>&1 && \
       ! pkgutil --pkg-info=com.apple.pkg.DeveloperToolsCLI >/dev/null 2>&1; then

        error 'Please install XCode and the XCode Command Line Tools, then run this script again. On newer systems this can be done with: xcode-select --install   '
    fi

    if command -v brew >/dev/null; then
        brew_installdeps
    elif command -v port >/dev/null; then
        macports_installdeps
    elif command -v fink >/dev/null; then
        fink_installdeps
    else
        error 'You have no package manager, please install homebrew, macports or fink'
    fi
}

brew_installdeps() {
    check_cross
    installing

    check brew -v update

    set --
    for f in cairo cmake ffmpeg gettext jpeg libpng libtiff pkg-config sdl2 sfml wxmac; do
        if brew info "$f" | grep -Eq '^Not installed$'; then
            set -- "$@" "$f"
        fi
    done
    [ $# -gt 0 ] && check brew -v install "$@"

    brew -v cleanup

    generic_build_instructions
}

macports_installdeps() {
    check_cross
    installing

    check sudo port -v selfupdate
    check sudo port -v install cairo cmake ffmpeg gettext jpeg libpng tiff pkgconfig libsdl2 sfml wxWidgets-3.0 libiconv
    check sudo port select wxWidgets wxWidgets-3.0

    generic_build_instructions
}

fink_installdeps() {
    check_cross
    installing

    check sudo fink -vy selfupdate
    check sudo fink -vy install cairo cmake ffmpeg libgettext8-dev libjpeg9 libpng16 libtiff5 pkgconfig sdl2 wxwidgets300-osxcocoa libiconv-dev

    warning 'SFML is required for LINK support, there is currently no SFML package for Fink, if you want LINK support you will need to install it manually'

    cmake_flags='-DENABLE_LINK=NO'

    generic_build_instructions
}

generic_build_instructions() {
    cat <<EOF

Done! To build do:

mkdir build && cd build
cmake .. $cmake_flags
make -j10
EOF
}

main "$@"