The license file is actually named 'License.txt', not 'license'
The 'Stella Team' has a capital T, not lowercase.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1921 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
from write port was correctly detected for the 1K area, it was actually
zeroing ROM instead of RAM!
Added support for 'read from write port' logic for the upper 256 byte
page in E7 bankswitching.
Bumped version # for release to testers on AtariAge.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1919 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
in accordance with the naming scheme defined by Apple. This means
upgrading to the next version of Stella will lose all settings for
OSX users (unless they manually rename their current plist file).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1918 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
simply as 'Stella', just as it is on other platforms (instead
of StellaOSX). This indicates that the OSX port is now a
first-class citizen, with the same importance as Linux and Windows.
Also cleaned up various text files for spelling mistakes and
formatting issues in OSX.
Added credits for Richard Kennehan, who donated a 2600 console
and various controllers to help with Stella development.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1916 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
is related to the currently running ROM. If enabled (the default and current
behaviour), state files that do not match the currently loaded ROM will not
be loaded. Otherwise, the state file will attempt to load. Note that in the
latter case, this will probably cause 'bad things' to happen. It's mostly
for developers who are constantly recompiling a ROM, and wish to use a
previously created state file even when the ROM MD5 changes.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1915 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
will be integrated intp CpuDebug, which will also be merged with distella.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1914 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
OSX plist file should use 10.4 as the minimum for the i386 version, not 10.5.
Otherwise, all Tiger users would be excluded from the next release.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1911 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
them in under src/emucore/m6502/src, and bspf under that again at
bspf/src. It just made searching for classes that much harder.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1907 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
get nearly enough attention. This is about to change, since I'm moving
to using it full time at work (still Linux at home though!).
The 'Control' key modifier for OSX is now the actual Control key, just like
on every other platform (instead of Command). The 'Alt' key modifier for
OSX is now the Command key (instead of Shift-Cmd). Maybe in the past it
made sense for this, when keyboards weren't the same between platforms, but
that's no longer the case. And since Stella requires at least OSX 10.4,
everyone using it from this point on probably has newer hardware.
Still TODO is consider a few special keys for OSX (minimize, hide, etc).
Updated documentation for new key combos, as well as the recent build
and debugger improvements.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1906 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
or newer. Obviously, this one only runs on x86 machines. It's compiled
with the very latest compiler (Clang), which is much faster at compiling
as well as runtime. And it also includes a 64-bit version, which is
only available on Snow Leopard. The old build environment support 32-bit
in 10.4, 10.5 and 10.6 for PPC and Intel.
Fixed string overflow in reading settings from plist file in OSX. I need
to figure out how to use C++ code from within Objective-C, since the
cause of the bug was C string code (which is notorious for buffer
overruns).
Bumped version # to test2, for some testers on AtariAge.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1904 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
properly distinguishes between intermediate reads which are part of writes,
and ordinary reads. In the former case, only a read which has a different
address than a write is flagged as an error; intermediate reads acting on
the same address as the corresponding write are considered normal, and won't
trigger a break.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1901 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
controlled by 'tiafloat', which has now been removed. Now, all
undriven pins take on the last value on the databus. This fixes a bug
in those reads where bit 6 or bits 6 & 7 are also undriven (previously,
these bits would always be zero, and only bits 0-5 were from lastdatabus.
Added new commandline argument 'tiadriven', which defaults to false.
In this default case, relevant bits take on values from the databus.
If true, relevant bits still take on databus values, but some are
randomly driven high as well. This helps to expose bugs when
developers assume the values for undriven/floating bits.
Added 'uimessages' commandline argument and associated UI item. When
disabled, messages which are normally shown in-game are disabled.
Certain messages which indicate a serious error are still shown, however.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1900 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Fixed BSPF_ARCH macro to correctly detect i386 and x86_64 in Windows.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1898 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
version and SDL library.
Bumped version # for test builds for AtariAge members.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1897 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
breaks to test whether an illegal read to the write port of cartridge
RAM has occurred. It can be used as follows:
breakif {_rwport == 100} // break if read was done at wport address 100
breakif {_rwport} // break if read was done at *any* wport address
This currently works for all extended RAM carts that worked before.
Specifically, 4A50, DPC, AR and possibly several others aren't supported
yet. More testing is required.
Renamed CartFASC and CartMB to CartFA and CartF0, respectively. This
naming now matches that used in other emulators.
CartMC now properly handles read from write port, by using random
values instead of just zero. However, no test ROMs are available for
this scheme, so there may still be issues.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1896 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
The values written and returned in such a case are now more accurate,
and are a combination of the previous databus value and randomization
(the latter emulating the randomness of Z-state bits). This provides
more accurate emulation than before, where zeros were used instead.
In particular, types 3E and E7 are now working correctly for the first
time. Thanks to Batari for suggestions in this area.
Moved random number generation from Cartridge to System class.
The Subversion build number is now shown in the AboutDialog box.
Still TODO is add architecture information (i386, x86_64, etc).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1895 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
was duplicate code in many Cart classes and in M6532 class, and since all
these classes are subclasses of Device, it made sense to move the
functionality there instead.
Carts 3E and E7 now return a random value when attempting to read from
the write port. Still TODO is determine what happens to the value at
that address (is it randomized or zeroed?). Thanks to Batari for
suggestions and sample code.
Fixed bug in E7 carts when entering the debugger; bankswitch was being
inadvertantly triggered which caused emulation to fail.
Overall, I need to figure out exactly what happens when reading from
the write port for all carts with extended RAM. There are two things
to consider: what value is written to the address, and what value
is returned.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1892 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
that will be in the next release (ppc32, i386, x86_64).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1891 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
determining whether we're running in 32 or 64-bit mode on a particular
system (especially in OSX, where the same app could contain up to 4 actual
builds).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1889 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Leopard (10.6). From this point on, the lowest supported version is
OSX 10.4.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1886 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
objects. These actions are tied to the same keys as for toggling the
objects themselves, with the addition of the 'Shift' key. For example,
toggling the P0 object is 'Alt z', and toggling P0 collisions is
'Shift-Alt z'. Note that disabling an object will obviously disable
its collisions as well. Still TODO is work out how these keys map on
OSX; the Shift key is already being used for something else.
Reverted Cosmic Ark 'starfield effect' to match the descriptions
given in the 'Stella 3.0 released' thread on AtariAge. It seems the
system I tested this on has an Svideo mod board that changes the
output from a normal console.
Bumped state file format header, since the TIA internals have changed
again. As well, bumped version # to 3.1_svn.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1884 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
better viewing in OSX default text editor.
Added build script and template DMG to automatically build a
StellaOSXver.dmg file.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1880 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Updated the documentation for build info for Windows. Still TODO is add more detailed info for Linux and OSX.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1876 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
debugger disassembly improvements, so it will have to wait until 3.1.
Updated various files for impending 3.0 release.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1874 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
selects the item that was previously selected.
Fixed bug in Cheat dialog where editing a cheat didn't remove the old one.
Updated TODO, rearranging improved disassembly as the #1 priority for the
next release; I don't have time to finish it now.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1873 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
all graphical objects in different colors in fixed debug colors mode,
even those that normally share a color register (ie, P0/M0, P1/M1, etc).
Removed TIA::updateFrameScanline, an unwieldy 600+ line function. It
was useful as an optimization measure when Stella was first written,
but at this point I think it's more trouble than it's worth. Removing
the code not only makes the TIA class much smaller and easier to
understand, it also fixes some graphical bugs in fixed debug colors
mode (bugs that probably wouldn't have been found otherwise). Next on
the chopping block are the various 'masks', or at least the alignments
(which cause the arrays to be 4 times larger than they need to be).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1871 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
normal scan. Previously, the blanking was done each frame, but the new
way more accurately emulates what happens on a real system.
Added a few tweaks for the properties database.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1870 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
stephena